Utilization of waste phosphogypsum to prepare hydroxyapatite nanoparticles and its application towards removal of fluoride from aqueous solution

Defluoridation using biomimetically synthesized nano zirconium chitosan composite: kinetic and equilibrium studies

The present study reports a novel approach for synthesis of Zr nanoparticles using aqueous extract of Aloe vera. Resulting nanoparticles were embedded into chitosan biopolymer and termed as CNZr composite. The composite was subjected to detailed adsorption studies for removal of fluoride from aqueous solution. The synthesized Zr nanoparticles showed UV-vis absorption peak at 420nm. TEM result showed the formation of polydispersed, nanoparticles ranging from 18nm to 42nm. SAED and XRD analysis suggested an fcc (face centered cubic) Zr crystallites. EDAX analysis suggested that Zr was an integral component of synthesized nanoparticles. FT-IR study indicated that functional group like NH, CO, CN and CC were involved in particle formation. The adsorption of fluoride on to CNZr composite worked well at pH 7.0, where ∼99% of fluoride was found to be adsorbed on adsorbent. Langmuir isotherm model best fitted the equilibrium data since it presented higher R(2) value than Freundlich model. In comparison to pseudo-first order kinetic model, the pseudo-second order model could explain adsorption kinetic behavior of F(-) onto CNZr composite satisfactorily with a good correlation coefficient. The present study revealed that CNZr composite may work as an effective tool for removal of fluoride from contaminated water.

Novel apatite-based sorbent for defluoridation: synthesis and sorption characteristics of nano-micro-crystalline hydroxyapatite-coated-limestone

Elevated levels of fluoride (F(-)) in groundwaters of granitic and basaltic terrains pose a major environmental problem and are affecting millions of people all over the world. Hydroxyapatite (HA) has been shown to be a strong sorbent for F(-); however, low permeability of synthetic HA results in poor sorption efficiency. Here we provide a novel method of synthesizing nano- to micrometer sized HA on the surfaces of granular limestone to improve the sorption efficiency of the HA-based filter. Our experiments with granular limestone (38-63, 125-500 μm) and dissolved PO4(3-) (0.5-5.3 mM) as a function of pH (6-8) and temperature (25-80 °C) indicated rapid formation of nano- to micrometer sized HA crystals on granular limestone with the maximum surface coverage at lower pH and in the presence of multiple additions of aqueous PO4(3-). The HA crystal morphology varied with the above variables. The sorption kinetics and magnitude of F(-) sorption by HA-coated-fine limestone are comparable to those of pure HA, and the F(-) levels dropped to below the World Health Organization's drinking water limit of 79 μM for F(-) concentrations commonly encountered in contaminated potable waters, suggesting that these materials could be used as effective filters. Fluorine XANES spectra of synthetic HA reacted with F(-) suggest that the mode of sorption is through the formation of fluoridated-HA or fluorapatite at low F(-) levels and fluorite at high F(-) loadings.

A novel ultrasonication method in the preparation of zirconium impregnated cellulose for effective fluoride adsorption

In the present work, we propose for the first time a novel ultrasound assisted methodology involving the impregnation of zirconium in a cellulose matrix. Fluoride from aqueous solution interacts with the cellulose hydroxyl groups and the cationic zirconium hydroxide. Ultrasonication ensures a green and quick alternative to the conventional time intensive method of preparation. The effectiveness of this process was confirmed by comprehensive characterization of zirconium impregnated cellulose (ZrIC) adsorbent using Fourier transform infrared spectroscopy (FT-IR), energy dispersive X-ray spectrometry (EDX) and X-ray diffraction (XRD) studies. The study of various adsorption isotherm models, kinetics and thermodynamics of the interaction validated the method.

A critical study on efficiency of different materials for fluoride removal from aqueous media

Fluoride is a persistent and non-biodegradable pollutant that accumulates in soil, plants, wildlife and in human beings. Therefore, knowledge of its removal, using best technique with optimum efficiency is needed. The present survey highlights on efficacy of different materials for the removal of fluoride from water. The most important results of extensive studies on various key factors (pH, agitation time, initial fluoride concentration, temperature, particle size, surface area, presence and nature of counter ions and solvent dose) fluctuate fluoride removal capacity of materials are reviewed.