Engineering amphiphilic membrane surfaces based on PEO and PDMS segments for improved antifouling performances

Antifouling membranes for sustainable water purification: strategies and mechanisms

One of the greatest challenges to the sustainability of modern society is an inadequate supply of clean water. Due to its energy-saving and cost-effective features, membrane technology has become an indispensable platform technology for water purification, including seawater and brackish water desalination as well as municipal or industrial wastewater treatment. However, membrane fouling, which arises from the nonspecific interaction between membrane surface and foulants, significantly impedes the efficient application of membrane technology. Preparing antifouling membranes is a fundamental strategy to deal with pervasive fouling problems from a variety of foulants. In recent years, major advancements have been made in membrane preparation techniques and in elucidating the antifouling mechanisms of membrane processes, including ultrafiltration, nanofiltration, reverse osmosis and forward osmosis. This review will first introduce the major foulants and the principal mechanisms of membrane fouling, and then highlight the development, current status and future prospects of antifouling membranes, including antifouling strategies, preparation techniques and practical applications. In particular, the strategies and mechanisms for antifouling membranes, including passive fouling resistance and fouling release, active off-surface and on-surface strategies, will be proposed and discussed extensively.

Preparation and characterization of an amphiphilic polyamide nanofiltration membrane with improved antifouling properties by two-step surface modification method

Membrane fouling is an urgent problem needing to be solved for practical application of nanofiltration membranes. In this study, an amphiphilic nanofiltration membrane with hydrophilic domains as well as low surface energy domains was developed, to integrate a fouling-resistant defense mechanism and a fouling-release defense mechanism. A simple and effective two-step surface modification of a polyamide NF membrane was applied. Firstly, triethanolamine (TEOA) with abundant hydrophilic functional groups was grafted to the membrane surface via reacting with the residual acyl chloride group of the nanofiltration membrane, making the nanofiltration membranes more hydrophilic; secondly, the 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFTS), well-known as a low surface energy material, was covalently grafted on the hydroxyl functional groups through hydrogen bonding. Filtration experiments with model foulants (bovine serum albumin (BSA) protein solution, humic acid solution (HA) and sodium alginate solution (SA)) were performed to estimate the antifouling properties of the newly developed nanofiltration membranes. As a result of surface modification proposed in this study the antifouling properties of an amphiphilic modified F-PA/PSF membrane were enhanced more than 10% compared to the PA/PSF specimen in terms of flux recovery ratio.

Schematic diagram of amphiphilic NF membrane by a two-step modification.

Low-fouling PES membranes fabricated via in situ copolymerization mediated surface zwitterionicalization

PEGylated and zwitterionic PES membranes were fabricated during membrane formation, showing superior antifouling and anticoagulant properties.

Protein Resistant Polymeric Biomaterials

Toward improving implantable medical devices as well as diagnostic performance, the development of polymeric biomaterials having resistance to proteins remains a priority. Herein, we highlight key strategies reported in the recent literature that have relied upon improvement of surface hydrophilicity via direct surface modification methods or with bulk modification using surface modifying additives (SMAs). These approaches have utilized a variety of techniques to incorporate the surface hydrophilization agent, including physisorption, hydrogel network formation, surface grafting, layer-by-layer (LbL) assembly and blending base polymers with SMAs. While poly(ethylene glycol) (PEG) remains the gold standard, new alternatives have emerged such as polyglycidols, poly(2-oxazoline)s (POx), polyzwitterions, and amphiphilic block copolymers. While these new strategies provide encouraging results, the need for improved correlation between in vitro and in vivo protein resistance is critical. This may be achieved by employing complex protein solutions as well as strides to enhance the sensitivity of protein adsorption measurements.

CuSO4/H2O2-Triggered Polydopamine/Poly(sulfobetaine methacrylate) Coatings for Antifouling Membrane Surfaces

Mussel-inspired polydopamine (PDA) coatings have been broadly exploited for constructing functional membrane surfaces. One-step codeposition of PDA with antifouling polymers, especially zwitterionic polymers, has been regarded as a promising strategy for fabricating antifouling membrane surfaces. However, one challenge is that the codeposition is usually a slow process over 10 h or even several days. Herein, we report that CuSO₄/H₂O₂ is able to notably accelerate the codeposition process of PDA with poly(sulfobetaine methacrylate) (PSBMA). In our case, PSBMA is facilely anchored to the polypropylene microporous membrane (PPMM) surfaces within 1 h with the assistance of PDA because of its strong interfacial adhesion. The PDA/PSBMA-coated PPMMs show excellent surface hydrophilicity, high water permeation flux (7506 ± 528 L/m²·h at 0.1 MPa), and an outstanding antifouling property. Moreover, the antifouling property is maintained after the membranes are treated with acid and alkali solutions as well as organic solvents. To recap, it provides a facile, universal, and time-saving strategy for exploiting high-efficiency and durable antifouling membrane surfaces.

Biofouling formation and structure on original and modified PVDF membranes: role of microbial species and membrane properties

The finding confirmed that the membrane hydrophilicity affected the formation of biofouling. The microbial species also played an essential role in the formation and structure of biofilms as the species affected each other's adhesion behavior.

Molecular level studies on interfacial hydration of zwitterionic and other antifouling polymers in situ

Antifouling polymers have wide applications in biomedical engineering and marine industry. Recently, zwitterionic materials have been reported as promising candidates for antifouling applications, while strong hydration is believed to be the key antifouling mechanism. Zwitterionic materials can be designed with various molecular structures, which affect their hydration and antifouling performance. Although strong hydration has been proposed to occur at the material surfaces, probing the solid material/water interfaces is challenging with traditional analytical techniques. Here in this review, we will review our studies on surface hydration of zwitterionic materials and other antifouling materials by using sum frequency generation (SFG) vibrational spectroscopy, which provides molecular understanding of the water structures at various material surfaces. The materials studied include zwitterionic polymer brushes with different molecular structures, amphiphilic polymers with zwitterionic groups, uncharged hydrophilic polymer brushes, amphiphilic polypeptoids, and widely used antifouling material poly(ethylene glycol). We will compare the differences among zwitterionic materials with various molecular structures as well as the differences between antifouling materials and fouling surfaces of control samples. We will also discuss the effects of pH and biological molecules like proteins on the surface hydration of the zwitterionic materials. Using SFG spectroscopy, we have measured the hydration layers of antifouling materials and found that strong hydrogen bonds are key to the formation of strong hydration layers preventing protein fouling at the polymer interfaces.

STATEMENT OF SIGNIFICANCE

Antifouling polymers have wide applications in biomedical engineering and marine industry. Recently, zwitterionic materials have been reported as promising candidates for antifouling applications, while strong hydration is believed to be the key antifouling mechanism. However, zwitterionic materials can be designed with various molecular structures, which affect their hydration and antifouling performance. Moreover, although strong hydration has been proposed to occur at the material surfaces, probing the solid material/water interfaces is challenging with traditional analytical techniques. Here in this manuscript, we will review our studies on surface hydration of zwitterionic materials and other antifouling materials by using sum frequency generation (SFG) vibrational spectroscopy, which provides molecular understanding of the water structures at various material surfaces. The materials studied include zwitterionic polymer brushes with different molecular structures, amphiphilic polymers with zwitterionic groups, uncharged hydrophilic polymer brushes, amphiphilic polypeptoids, and widely used antifouling material poly(ethylene glycol). We will compare the differences among zwitterionic materials with various molecular structures as well as the differences between antifouling materials and fouling surfaces of control samples. We will also discuss the effects of pH and biological molecules like proteins on the surface hydration of the zwitterionic materials. All the SFG results indicate that strongly hydrogen-bonded water at the materials' surfaces (strong surface hydration) is closely correlated to the good antifouling properties of the materials. This review will be widely interested by readers of Acta Biomaterialia and will impact many different research fields in chemistry, materials, engineering, and beyond.

Ultralow Oil-Fouling Heterogeneous Poly(ether sulfone) Ultrafiltration Membrane via Blending with Novel Amphiphilic Fluorinated Gradient Copolymers

A novel amphiphilic fluorinated gradient copolymer was prepared by semibatch reversible addition-fragmentation chain transfer (RAFT) method using poly(ethylene glycol) methyl ether methacrylate (PEGMA) and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl acrylate (TFOA) as monomers. The resultant amphiphilic copolymers were then incorporated into the poly(ether sulfone) (PES) to fabricate PES blend membranes via the non-solvent-induced phase separation method (NIPS). During the phase inversion process, both hydrophilic (PEGMA) and low surface energy (TFOA) segments significantly enriched on the membrane surface by surface segregation to form an amphiphilic surface, which was demonstrated by surface wetting properties and X-ray photoelectron spectroscopy (XPS) measurements. According to the filtration experiments of oil-in-water emulsion, the heterogeneous membranes exhibited superior oil-fouling resistant properties, that is, low flux decay (as low as 15.4%) and high flux recovery (almost 100%), compared to the pure PES membrane. The synergistic effect of fouling-resistant and fouling-release mechanisms was found to be responsible for the excellent antifouling capacities. The findings of this study offer a facile and robust strategy for fabricating ultralow oil-fouling membranes that might be used for effective oil/water separation.

Manipulating the multifunctionalities of polydopamine to prepare high-flux anti-biofouling composite nanofiltration membranes

An anti-biofouling composite NF membrane was prepared through the rational manipulation of the adhesion, reaction and separation functionalities of PDA.

Enhanced oil-fouling resistance of poly(ether sulfone) membranes by incorporation of novel amphiphilic zwitterionic copolymers

A heterogeneous PES membrane modified with novel amphiphilic zwitterionic copolymers that displayed dramatically enhanced oil-fouling resistance.

Improved antifouling and antimicrobial efficiency of ultrafiltration membranes with functional carbon nanotubes

In this study, functional polymer brush grafted carbon nanotubes (p-CNTs) were developed as multifunctional modifiers for PES membrane modification.

Fabrication and characterization of antifouling carbon nanotube/polyethersulfone ultrafiltration membranes

SBMA@CNT particles were used as a novel kind of surface modifier, which could undergo self-organization at the interface of a membrane/coagulation bath. The modified membranes performed excellent pollution resistance.

Enhanced hydrophilicity of a thermo-responsive PVDF/palygorskite-g-PNIPAAM hybrid ultrafiltration membrane via surface segregation induced by temperature

The hydrophilicity of a thermo-responsive PVDF/palygorskite-g-PNIPAAM hybrid ultrafiltration membrane was enhanced via surface segregation induced by coagulation bath temperature (CBT).

Enhanced antifouling ability of a poly(vinylidene fluoride) membrane functionalized with a zwitterionic serine-based layer

Antifouling PVDF membrane was fabricated through covalently surface immobilization of zwitterionic serine-based layer via facile free radical cross-linking polymerization of serine methacrylate (SerMA) on membrane surface.

Durable antifouling polyvinylidene fluoride membrane via surface zwitterionicalization mediated by an amphiphilic copolymer

The antifouling properties of PVDF membrane were remarkably enhanced by facile incorporation of an amphiphilic triblock copolymer PDMAEMA-b-PDMS-b-PDMAEMA and subsequent surface zwitterionicalization.

Surface Structure and Hydration of Sequence-Specific Amphiphilic Polypeptoids for Antifouling/Fouling Release Applications

Amphiphilic polypeptoids can be designed with specific sequences of hydrophilic and hydrophobic units, which determine their surface properties for antifouling/fouling release purposes. Although the sequence-dependent surface structures of polypeptoids have been extensively investigated, e.g., with X-ray spectroscopy, their molecular structures under the aqueous conditions relevant to marine fouling have not been studied. In this work, we applied sum frequency generation (SFG) vibrational spectroscopy to study the surface structures and hydration of a series of amphiphilic polypeptoid coatings with different sequences in air and water. SFG spectra, in agreement with X-ray spectroscopy studies, revealed that the surface coverage of the hydrophilic N-(2-methoxyethyl)glycine (Nme) units in air is affected by both the number and position of the hydrophobic N-(heptafluorobutyl)glycine (NF) units in the peptoid chain and is negatively correlated with the surface concentration of the fluorine element. Our ability to probe the SFG signals of water molecules at the peptoid surface provides new information on the hydrated film properties. From these SFG signals and the time evolution of water contact angles on the polymers, we see that the hydrated film properties are also dependent upon the peptoid sequence. This work indicates that the surface presence of the Nme groups and the ability of the polymers to order and strongly hydrogen bond with interfacial water molecules determine their antifouling properties, whereas the surface restructuring rate upon contact with water affects their fouling release behaviors.

Efficient Preparation of Super Antifouling PVDF Ultrafiltration Membrane with One Step Fabricated Zwitterionic Surface

On the basis of the excellent fouling resistance of zwitterionic materials, the super antifouling polyvinylidene fluoride (PVDF) membrane was efficiently prepared though one-step sulfonation of PVDF and polyaniline blend membrane in situ. The self-doped sulfonated polyaniline (SPANI) was generated as a novel zwitterionic polymer to improve the antifouling property of PVDF ultrafiltration membrane used in sewage treatment. Surface attenuated total reflection Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, surface zeta potential, and water contact angle demonstrated the successful fabrication of zwitterionic interface by convenient sulfonation modification. The static adsorption fouling test showed the quantified adsorption mass of bovine serum albumin (BSA) pollutant on the PVDF/SPANI membrane surface decreases to 3(±2) μg/cm(2), and the water flux recovery ratio (FRR) values were no less than 95% for the three model pollutants of BSA, sodium alginate (SA), and humic acid (HA), which were corresponding hydrophobic, hydrophilic, and natural pollutants in sewage, respectively. This Research Article demonstrated the antifouling advantages of zwitterionic SPANI and aimed to provide a simple method for the large scale preparation of zwitterionic antifouling ultrafiltration membranes.

Engineering a Highly Hydrophilic PVDF Membrane via Binding TiO₂Nanoparticles and a PVA Layer onto a Membrane Surface

A highly hydrophilic PVDF membrane was fabricated through chemically binding TiO2 nanoparticles and a poly(vinyl alcohol) (PVA) layer onto a membrane surface simultaneously. The chemical composition of the modified membrane surface was determined by X-ray photoelectron spectroscopy, and the binding performance of TiO2 nanoparticles and the PVA layer was investigated by a rinsing test. The results indicated that the TiO2 nanoparticles were uniformly and strongly tailored onto the membrane surface, while the PVA layer was firmly attached onto the surface of TiO2 nanoparticles and the membrane by adsorption-cross-linking. The possible mechanisms during the modification process and filtration performance, i.e., water permeability and bovine serum albumin (BSA) rejection, were investigated as well. Furthermore, antifouling property was discussed through multicycles of BSA solution filtration tests, where the flux recovery ratio was significantly increased from 20.0% for pristine PVDF membrane to 80.5% for PVDF/TiO2/PVA-modified membrane. This remarkable promotion is mainly ascribed to the improvement of surface hydrophilicity, where the water contact angle of the membrane surface was decreased from 84° for pristine membrane to 24° for PVDF/TiO2/PVA membrane. This study presents a novel and varied strategy for immobilization of nanoparticles and PVA layer on substrate surface, which could be easily adapted for a variety of materials for surface modification.

Improved antifouling property of PVDF membranes by incorporating an amphiphilic block-like copolymer for oil/water emulsion separation

Amphiphilic membrane surfaces were constructed in one step by surface segregation and the membranes exhibited a superior antifouling property.

Surface modification and endothelialization of biomaterials as potential scaffolds for vascular tissue engineering applications

This review highlights the recent developments of surface modification and endothelialization of biomaterials in vascular tissue engineering applications.

Automated chemiluminescence immunoassay for a nonionic surfactant using a recycled spinning-pausing controlled washing procedure on a compact disc-type microfluidic platform

A fully automated and integrated chemiluminescence immunoassay, carried out on a compact disc (CD)-type microfluidic platform, for the detection of alkylphenol polyethoxylates (APnEOs) is described. The pattern of the CD-type microchip was designed so as to permit the sequential solution delivery of the sample solution, the washing solution and the luminol solution, which are required in the chemiluminescence immunoassay process, along with a designed rotation program for spinning the CD-type microchip. The procedure for flowing the washing solution, the volume of which was limited on the CD-type microchip, was optimized by using a recycled spinning-pausing rotation program to overcome the non-specific adsorption of the horseradish peroxidase labeled APnEOs at the detection area. The detection limit of the immunoassay is about 10 ppb.