Zeolite nanoparticle as a superior adsorbent with high capacity: Synthesis, surface modification and pollutant adsorption ability from wastewater

Evaluation of Zeolite as a Potential Reactive Medium in a Permeable Reactive Barrier (PRB): Batch and Column Studies

The purpose of this work is to evaluate the capacity of a natural zeolite to be used as a reactive material in a permeable reactive barrier (PRB) to remove inorganic contaminants from groundwater. To this aim, zeolite samples were subjected to characterization tests, column experiments, batch tests and a flushing process to evaluate the adsorption and desorption capacities of the zeolite. In the column experiments, the samples were subjected to eight successive cycles involving the percolation of a potassium aqueous solution (1500 mg/L) and a subsequent flushing process with water. Batch tests were conducted by mixing 20 g of zeolite with 100 mL of single-element aqueous solutions of K and Zn with concentrations of 200 mg/L. The results indicate that the zeolite rock is composed predominantly of clinoptilolite species and has a Si/Al ratio of 6.8, a high cationic exchange capacity (CEC) of 180 cmolc/kg and a high K+ adsorption rate with a removal efficiency of 78%. The adsorption isotherms of the zeolite follow the Langmuir model and are well fit by a pseudo-second-order kinetic model showing a high correlation coefficient (r2 > 0.999) for both K+ and Zn2+ cations. Additionally, the contaminant transport parameters for K+ ions (Rd = 24.9; Dh = 1.32 × 10–2 cm2/s and α = 1.42) reveal that the zeolite is resistant to the dispersion of ions in the barrier, indicating that the material has advantageous characteristics for use in a PRB. However, the flushing process of the material is not efficient, indicating that the appropriate use of the zeolite is in clean-up systems in which the adsorbent material can be exchanged after losing its efficiency as a reactive barrier.

Binder-free preparation of ZSM-5@silica beads and their use for organic pollutant removal

Organic structure directing agent (OSDA)- and binder-free preparation of ZSM-5@silica beads and their use for aniline removal.

Effective adsorption of zinc on magnetic nanocomposite of Fe3O4/zeolite/cellulose nanofibers: kinetic, equilibrium, and thermodynamic study

In this paper, the adsorption behavior of zinc onto magnetic zeolite/cellulose nanofibers (MZNF) was studied. The prepared adsorbent was characterized by SEM, FTIR, and VSM analyses. The mass ratio of adsorbent in composite, pH, contact time, adsorbent dosage, initial Zn⁺² concentration, temperature, and agitation speed were investigated in batch experiments. The results showed that zeolite played an important role in the prepared nanocomposite due to its great surface area. pH 7 exhibited the highest Zn⁺² removal efficiency. Rapid adsorption at the first 30 min of the reaction is one of the advantages of the prepared adsorbents. Moreover, increase at temperature led to higher efficiency and maximum efficiency was attained at 30 °C. Under optimum conditions, MZNF showed removal efficiency of 96% and maximum adsorption capacity of 9.45 mg/g. The presence of the competing ions did not reduce the efficiency of the process and adsorption efficiency was higher than 93%. The calculated RSD of 1.42% exhibits the suitability of the process. Equilibrium data were examined by various isotherms and kinetics equations. It was concluded that Pseudo second-order model and Langmuir models described the adsorption process well. Based on these results, MZNF obtained in this work can be served as a promising candidate for Zn⁺² removal in wastewater.

Simultaneous removal of NH3-N and COD from shale gas distillate via an integration of adsorption and photo-catalysis: A hybrid approach

In view of the circulation cooling water (CCW) quality for refining and petrochemical enterprises, distillates obtained from shale gas produced water after alkali precipitation, filtration and multi-effect evaporation required further purification to remove NH₃-N and COD. Illumination, adsorption, photocatalysis after adsorption equilibrium (AP) and integration of adsorption and photocatalysis (IOAP) were carried out to optimize the distillates treatment. AP and IOAP treatments were feasible for the simultaneous removal of NH₃-N and COD from the target distillate, while IOAP treatment had much better adaptability and practicability due to its economic cost and easy operation. In IOAP, the removal rate of COD and NH₃-N was high up to 59.0% and 88.9%, respectively, under Xenon lamp illumination (25 A) for 60 min with 10 g/L zeolite. The residual concentration of COD and NH₃-N were 73.9 mg/L and 23.0 mg/L, respectively, which could well meet the CCW quality. Furthermore, the results of zeolites characterization (SEM-EDX, BET and FTIR) and kinetics analysis showed that the removal of COD in IOAP process mainly depended on the effect of photocatalysis excited by zeolite, while the removal of NH₃-N was in virtue of the synergistic effect of photocatalysis and adsorption.

Environmental-Friendly Modifications of Zeolite to Increase Its Sorption and Anion Exchange Properties, Physicochemical Studies of the Modified Materials

Zeolites, naturally possessing a high negative surface charge and large specific surface, are used in agriculture as cationic fertilizers, water holders, heavy metals, and organic pollutants sorbents. Since some nutrients occur in anionic forms, there is a need to modify the zeolite surface to hold anions. In this study, hydrogen (hydrochloric acid), iron (Fe²⁺ and Fe³⁺), and aluminum cations as well as the influence of sodium hydroxide modifiers on the specific surface area, water vapor, adsorption energy, fractal dimension, mesopore volumes and radii, electrokinetic (zeta) potential, and isoelectric point were investigated. The use of alkali solution did not affect the zeolite properties significantly, whereas hydrogen, iron, and treatments with aluminum cations resulted in an increase in the specific surface area, mesopore volumes, and radii, and a decrease in the water-binding forces. Aluminum cations were the most effective in recharging the zeolite surface from negative to positive, shifting the isoelectric point toward the highest values. Calcination enlarged the negative surface charge and mesopore radius, and diminished the surface area and mesopore volume. The modified zeolites are promising carriers of anionic nutrients, large surface area sorbents, and suppliers of water for plant roots in soil.

Purification of starch and phosphorus wastewater using core-shell magnetic seeds prepared by sulfated roasting

Core-shell magnetic seeds with certain adsorption capacity that were prepared by sulfated roasting, served as the core of a magnetic separation technology for purification of starch wastewater. XRD and SEM results indicate that magnetite's surface transformed to be porous α-Fe₂O₃ structure. Compared with magnetite particles, the specific surface area was significantly improved to be 8.361 from 2.591 m²/g, with little decrease in specific susceptibility. Zeta potential, FT-IR and XPS experiments indicate that both phosphate and starch adsorbed on the surface of the core-shell magnetic seeds by chemical adsorption, which fits well with the Langmuir adsorption model. The porous surface structure of magnetic seeds significantly contributes to the adsorption of phosphate and starch species, which can be efficiently removed to be 1.51 mg/L (phosphate) and 9.51 mg/L (starch) using magnetic separation.