Thermodynamics of the adsorption of nickel ions from aqueous phase using graphene oxide and glycine functionalized graphene oxide

Chitin Adsorbents for Toxic Metals: A Review

Wastewater treatment is still a critical issue all over the world. Among examined methods for the decontamination of wastewaters, adsorption is a promising, cheap, environmentally friendly and efficient procedure. There are various types of adsorbents that have been used to remove different pollutants such as agricultural waste, compost, nanomaterials, algae, etc., Chitin (poly-β-(1,4)-N-acetyl-d-glucosamine) is the second most abundant natural biopolymer and it has attracted scientific attention as an inexpensive adsorbent for toxic metals. This review article provides information about the use of chitin as an adsorbent. A list of chitin adsorbents with maximum adsorption capacity and the best isotherm and kinetic fitting models are provided. Moreover, thermodynamic studies, regeneration studies, the mechanism of adsorption and the experimental conditions are also discussed in depth.

Removal of dye molecules from aqueous solution by carbon nanotubes and carbon nanotube functional groups: critical review

Scheme for the adsorption of dye molecules by CNTs and CNT functionality.

Adsorptive removal of nickel(II) ions from aqueous environment: A review

Among various methods adsorption can be efficiently employed for the treatment of heavy metal ions contaminated wastewater. In this context the authors reviewed variety of adsorbents used by various researchers for the removal of nickel(II) ions from aqueous environment. One of the objectives of this review article is to assemble the scattered available enlightenment on a wide range of potentially effective adsorbents for nickel(II) ions removal. This work critically assessed existing knowledge and research on the uptake of nickel by various adsorbents such as activated carbon, non-conventional low-cost materials, nanomaterials, composites and nanocomposites. The system's performance is evaluated with respect to the overall metal removal and the adsorption capacity. In addition, the equilibrium adsorption isotherms, kinetics and thermodynamics data as well as various optimal experimental conditions (solution pH, equilibrium contact time and dosage of adsorbent) of different adsorbents towards Ni(II) ions were also analyzed. It is evident from a literature survey of more than 190 published articles that agricultural solid waste materials, natural materials and biosorbents have demonstrated outstanding adsorption capabilities for Ni(II) ions.

Enhanced removal of nickel(II) ions from aqueous solutions by SDS-functionalized graphene oxide

In this paper, a one-pot and easy-to-handle method at room temperature without additional chemicals for the modification of graphene oxide (GO) with surfactant is found. Removal of nickel (II) ions from aqueous solutions by GO and surfactant (sodium dodecyl sulphate) modified graphene oxide (SDS-GO) was studied spectrophotometrically at room temperature as a function of time, initial concentration and pH. Adsorption capacity of the adsorbent was increased dramatically (from 20.19 to 55.16 mg/g found by Langmuir model) due to the functionalization of the surface by SDS. The driving force of the adsorption of Ni(II) ions is electrostatic attraction and Ni(II) ions adsorbed on the GO surface chemically besides ion exchange.

Comparison between Brazilian agro-wastes and activated carbon as adsorbents to remove Ni(II) from aqueous solutions

This research was performed to find an alternative, low-cost, competitive, locally available and efficient adsorbent to treat nickel (Ni) containing effluents. For this purpose, several Brazilian agro-wastes like sugarcane bagasse (SCB), passion fruit wastes (PFW), orange peel (OP) and pineapple peel (PP) were compared with an activated carbon (AC). The adsorbents were characterized. Effects of fundamental factors affecting the adsorption were investigated using batch tests. Kinetic and equilibrium studies were performed using conventional models. It was verified that the adsorption was favored at pH of 6.0 for all agro-wastes, being dependent of the Ni speciation, point of zero charge and surface area of the adsorbents. The Ni removal percentage was in the following order: SCB > OP > AC > PFW > PP. From the kinetic viewpoint, the Elovich model was appropriate to fit the Ni adsorption onto SCB, while for the other adsorbents, the pseudo-first-order model was the most suitable. For all adsorbents, the Langmuir model was the more adequate to represent the equilibrium data, being the maximum adsorption capacities of 64.1 mg g(-1), 60.7 mg g(-1), 63.1 mg g(-1), 48.1 mg g(-1) and 64.3 mg g(-1) for SCB, PFW, OP, PP and AC, respectively. These results indicated that mainly SCB and OP can be used as alternative adsorbents to treat Ni containing effluents.

Polyaniline nanofibers as highly effective re-usable adsorbent for removal of reactive black 5 from aqueous solutions

Polyaniline nanofibers (PANI NFs) with 50-80 nm in diameter were successfully prepared at room temperature (22 °C) using ferric chloride (FeCl3) as an oxidant via a simple rapid mixing polymerization method. The prepared PANI NFs were characterized by FE-SEM, HR-TEM, BET, ATR-FTIR and by Zeta potential measurement method. The adsorption of azo dye Reactive Black 5 (RB5) onto PANI NFs from aqueous solutions was investigated. Adsorption studies were carried out at different initial dye concentrations, initial solution pH and adsorbent doses. The kinetic data fitted well with the pseudo-second-order model while the equilibrium data were satisfactorily described by the Langmuir isotherm model. The Langmuir maximum adsorption capacity of RB5 at pH 6.0 was found to be 312.5, 389.1 and 434.7 mg/g at 25 °C, 35 °C and 45 °C, respectively. Thermodynamic parameters including the Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) changes indicated that the adsorption of RB5 onto PANI NFs was feasible, spontaneous, and endothermic. Moreover, desorption experiments revealed that the PANI NFs can be reused effectively for five consecutive adsorption-desorption cycles without any loss of its original capacity.