Factorial experimental design for the optimization of highly selective adsorption removal of lead and copper ions using metal organic framework MOF-2 (Cd)

Incorporation of UiO-66-NH2 MOF into the PAN/chitosan nanofibers for adsorption and membrane filtration of Pb(II), Cd(II) and Cr(VI) ions from aqueous solutions

In the present study, the UiO-66-NH₂ MOF synthesized by microwave heating method was incorporated into the PAN/chitosan nanofibers for the removal of Pb(II), Cd(II) and Cr(VI) ions through the adsorption and membrane filtration processes. The synthesized MOFs and nanofibers were characterized using XRD, BET, FTIR, SEM, and DSC analysis. The effect of UiO-66-NH₂ MOF content (0-15 wt.%), pH (2-7), contact time(5-90 min), metal ions initial concentration (20-1000 mg/L) and temperature (25-45 °C) was studied on the metal ions adsorption using PAN/chitosan/UiO-66-NH₂ nanofibrous adsorbent. The kinetic, isotherm and thermodynamic parameters were evaluated to understand the metal ions adsorption mechanism using nanofibers. The Pseudo-second-order kinetic and Redlich-Peterson isotherm model were well described the experimental sorption data. In the heavy metal ions membrane filtration process, the different parameters such as MOF concentration (2-15 wt.%), membrane thickness (10-70 μm), metal ions concentration (5-50 mg/L), temperature (25-45 °C) and filtration time (1-24 h) were investigated on the performance of PVDF/ PAN/chitosan/UiO-66-NH₂ nanofibrous membrane toward metal ions removal. The high water flux and high metal ions removal within 18 h filtration time showed the high potential of PVDF/ PAN/chitosan/UiO-66-NH₂ membrane for the removal of metal ions from aqueous solutions.

Novel conjugated hybrid material for efficient lead(II) capturing from contaminated wastewater

An efficient material is always welcoming for the water treatment due to the need of clean water to safe the human health. The conjugate adsorbent (CJA) was fabricated by functional ligand embedded onto the highly porous silica material for selective lead (Pb(II)) ion monitoring and removal from wastewater. The study was achieved not only investigating the beginning material but also the performing extrusion as novel conjugate material, this defining the material novelty of this study considers to the modern state-of-art. The fabricated material was characterized in all aspects and then the experimental works for Pb(II) ion assessing were carried in batch mode. The CJA was exposed the color and signal intensity upon addition of Pb(II) ion from low to high concentrations. The optimum pH was considered at 5.50 based on the sensitivity, the color formation ability and high adsorption of Pb(II) ion. The determined limit of low detection was 0.18 μg/L, which was the extraordinary performance for the Pb(II) ion monitoring ability by the CJA. The adsorption efficiency, specific attention was remunerated to the influence of solution pH, reaction time, foreign ion, initial Pb(II) amounts and regeneration. The CJA was exhibited high kinetic performances and showed high adsorption Pb(II) ion compared with the different forms of material. The adsorption was completely fitted with the Langmuir adsorption as defining the monolayer coverage as expected of the homogeneous porosity of the CJA. The maximum adsorption was determined as high as 175.16 mg/g. In addition, the foreign ions were not affected in the Pb(II) adsorption by the CJA, and the adsorbent was regenerated using 0.20 M HCl for several cycles used without significant loss of the initial performance. Considering these advantages, the CJA demonstrated the potential low-cost material for competitive use in wastewater remediation, especially in the developing countries.