Novel poly(ε-caprolactone)/gelatin wound dressings prepared by emulsion electrospinning with controlled release capacity of Ketoprofen anti-inflammatory drug

Encapsulation of β-Carotene by Emulsion Electrospraying Using Deep Eutectic Solvents

The encapsulation β-carotene in whey protein concentrate (WPC) capsules through the emulsion electrospraying technique was studied, using deep eutectic solvents (DES) as solvents. These novel solvents are characterized by negligible volatility, a liquid state far below 0 °C, a broad range of polarity, high solubilization power strength for a wide range of compounds, especially poorly water-soluble compounds, high extraction ability, and high stabilization ability for some natural products. Four DES formulations were used, based on mixtures of choline chloride with water, propanediol, glucose, glycerol, or butanediol. β-Carotene was successfully encapsulated in a solubilized form within WPC capsules; as a DES formulation with choline chloride and butanediol, the formulation produced capsules with the highest carotenoid loading capacity. SEM micrographs demonstrated that round and smooth capsules with sizes around 2 µm were obtained. ATR-FTIR results showed the presence of DES in the WPC capsules, which indirectly anticipated the presence of β-carotene in the WPC capsules. Stability against photo-oxidation studies confirmed the expected presence of the bioactive and revealed that solubilized β-carotene loaded WPC capsules presented excellent photo-oxidation stability compared with free β-carotene. The capsules developed here clearly show the significant potential of the combination of DES and electrospraying for the encapsulation and stabilization of highly insoluble bioactive compounds.

Design and in vitro evaluation of electrospun shape memory polyurethanes for self-fitting tissue engineering grafts and drug delivery systems

Integration of multiple features including shape memory, biodegradation, and sustained drug delivery in a single material offers the opportunity to significantly improve the abilities of implantable devices for cardiovascular system regeneration. Two types of shape memory polyurethanes (SMPUs): PU-PLGA and PU-PLLA/PEG differing in soft segments composition that comprising blends of various biodegradable polyols, i.e. D,l-lactide-co-glycolide diol (o-PLGA), poly(e-caprolactone) diols (o-PCL) with various molecular weights, poly-l-lactide diol (o-PLLA), polyethylene glycol (o-PEG) were synthesized and further utilized to electrospun nanofibrous - rapamycin (Rap) delivery system. Structure characterization by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DCS) and hydrophilicity measurements were performed to gain more insights on the influence of the particular units of the softs segments on the transition temperature (T_trans), shape recovery, degradation profile, and drug release kinetics. In vitro study in PBS solution revealed that incorporation of o-PLGA segments to SMPUs is favorable over o-PEG as increased shape memory performance was observed. Moreover, presence of PLGA in PU-PLGA gave more predictable degradation profile in comparison to PU-PLLA/PEG system. Human Cardiac Fibroblasts (HCF) viability tests in vitro confirmed that the amount of Rap released from evaluated PU-PLLA/PEG/Rap and PU-PLGA/Rap drug delivery systems was sufficient to inhibit cells growth on the surface of the tested materials.

Fabrication of electrospun poly(lactic acid) nanoporous membrane loaded with niobium pentoxide nanoparticles as a potential scaffold for biomaterial applications

Tissue engineering aims to regenerate and restore damaged human organs and tissues using scaffolds that can mimic the native tissues. The requirement for modern and efficient biomaterials that are capable of accelerating the healing process has been considerably increased. In this work, a novel electrospun poly(lactic acid) (PLA) nanoporous membrane incorporated with niobium pentoxide nanoparticles (Nb₂ O₅ ) for biomaterial applications was developed. Nb₂ O₅ nanoparticles were obtained by microwave-assisted hydrothermal synthesis, and different concentrations (0, 1, 3, and 5% wt/wt) were tested. Chemical, morphological, mechanical, and biological properties of membranes were evaluated. Cell viability results demonstrated that the membranes presented nontoxic effects. The incorporation of Nb₂ O₅ improved cell proliferation without impairing the wettability, porosity, and mechanical properties of membranes. Membranes containing Nb₂ O₅ nanoparticles presented biocompatible properties with suitable porosity, which facilitated cell attachment and proliferation while allowing diffusion of oxygen and nutrients. This study has demonstrated that Nb₂ O₅ nanoparticle-loaded electrospun PLA nanoporous membranes are potential candidates for drug delivery and wound dressing applications.

Electrospun fibers and their application in drug controlled release, biological dressings, tissue repair, and enzyme immobilization

Electrospinning is a method of preparing microfibers or nanofibers by using an electrostatic force to stretch the electrospinning fluid. Electrospinning has gained considerable attention in many fields due to its ability to produce continuous fibers from a variety of polymers and composites in a simple way. Electrospun nanofibers have many merits such as diverse chemical composition, easily adjustable structure, adjustable diameter, high surface area, high porosity, and good pore connectivity, which give them broad application prospects in the biomedical field. This review systematically introduced the factors influencing electrospinning, the types of electrospun fibers, the types of electrospinning, and the detailed applications of electrospun fibers in controlled drug release, biological dressings, tissue repair and enzyme immobilization fields. The latest progress of using electrospun fibers in these fields was summarized, and the main challenges to be solved in electrospinning technology were put forward.

Electrospun asymmetric membranes for wound dressing applications

To accomplish a rapid wound healing it is necessary to develop an asymmetric membrane with interconnected pores consisting of a top layer that prevents rapid dehydration of the wound and bacteria penetration and a sub-layer with high absorption capacity and bactericidal properties. Polycaprolactone (PCL)/polyvinyl acetate (PVAc) asymmetric membranes loaded with the bactericidal monoterpene carvacrol (CRV) were synthesized and characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. Mechanical properties in dry and wet conditions and fluid handling behavior were also assessed. In addition, biological studies regarding their bactericidal effects, cytocompatibility and wound closure properties were also developed. Loading efficiencies of 40-50% were achieved in the prepared samples and 85-100% of the loaded CRV was released in simulated wound pH evolution medium. The significant inhibition of Gram negative (Escherichia coli S17) and Gram positive (Staphylococcus aureus ATCC 25923) bacteria growth clearly showed the suitability of the fabricated membranes for wound healing applications. Furthermore, cytocompatibility of the loaded membranes was demonstrated both in 2D and 3D human dermal fibroblast cultures, as well as cell migration was not impaired by released carvacrol from the membranes. These results highlight the potential of these polymeric electrospun membranes for wound healing.

Preparation of electrospun PCL-based scaffolds by mono/multi-functionalized GO

In the present study, sythetic biodegradable polymer poly(ε-caprolactone) (PCL) and graphene oxide (GO) were combined together to prepare 3D, composite tissue scaffolds (PCL/GO scaffolds) by using electrospinning technique. Also, the influence of Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) and/or thiophene (Th) modified GO on the composite PCL/GO mats (PCL/GO, PCL/GO-GRGDSP, PCL/GO-Th, PCL/GO-GRGDSP-Th) was further investigated. Characteristic examinations of the scaffolds were carried out by scanning electron microscope (SEM), contact angle (CA) measurements, x-ray photoelectron spectroscopy, TGA, electrical conductivity tests, phosphate buffer saline absorption and shrinkage tests and mechanical tests. All of the scaffolds were exhibited suitable bead-free and uniform morphology according to SEM images. With the addition of GO, better hydrophilicity and a slight CA decrease (∼5°) for the PCL/GO scaffolds were observed. Mechanical properties were reinforced drastically with the addition and well-dispersion of GO into PCL matrix. The incorporation of PCL and GO exhibited enhanced electrical conductivity and the highest value was found for PCL/GO-GRGDSP-Th (2%) as 15.06 μS cm^-1. The MG-63 osteoblast cell culture studies (MTT assay, ALP activity, Alizarin-Red staining, fluorescence and SEM analyses) showed that PCL/GO-GRGDSP-Th (1%) scaffolds exhibited the highest biocompatibility performance (1.87 fold MTT absorbance value comparing with neat PCL) due to the advanced properties of GO and the biological interfaces.

Localized and targeted delivery of NSAIDs for treatment of inflammation: A review

IMPACT STATEMENT

This work provides an overview of research currently being done exploring potential drug delivery device strategies for NSAIDs as an alternative to systemic delivery. Commentary on this field is made in an attempt to aid future experimental design, enabling researchers to determine the drugs and delivery vehicles which are most advantageous for them to pursue, as well as suggestions to standardize the reporting of such future research.

Potential core-shell designed scaffolds with a gelatin-based shell in achieving controllable release rates of proteins for tissue engineering approaches

The biomaterials design as core-shell structures opens a new door to the release of susceptible biomolecules in a controllable manner and enables to place natural biomaterials as shell layers to impart the effective biofunctional features at surfaces. In this study, core-shell designed scaffolds were prepared using coaxial electrospinning with hybrid of gelatin (GT)/polycaprolactone (PCL) at different weight ratios as their shell and protein solution as their core, followed by cross-linking to impart controllable release rates, tunable mechanical properties, and enhanced cytocompatibility. SEM, FM, and TEM confirmed the successful production of uniform core-shell nanofibers and homogeneous protein distribution. Results showed that an increase in GT proportion in the shell resulted in a decrease in fiber diameter, an increase of Young's modulus, and an intense burst release of BSA 0.2% which could be controlled through cross-linking. The mechanical tests revealed that the GT/PCL combining and cross-linking improved mechanical properties which correlated with an increase in spreading and proliferation of HUVECs. A slight burst release was also detected from BSA 0.05% and EGF encapsulated GT73P-cross-linked scaffold which demonstrated their applicability for a controlled release of dilute proteins. We were able to successfully incorporate two types of protein with different concentrations without supporting polymer into the GT shell to provide scaffolds possessing tunable mechanical properties and controllable release rates through blending with PCL at different ratios and/or cross-linking. These findings are promising to promote delivery systems of angiogenic growth factors that are needed a sustained release with different rates at each angiogenesis stage. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019.

Efficiency of Multiparticulate Delivery Systems Loaded with Flufenamic Acid Designed for Burn Wound Healing Applications

Burns are soft tissue injuries that require particular care for wound healing. Current tissue engineering approaches are aimed at identifying the most efficient treatment combinations to restore the tissue properties and function by using adapted scaffolds or delivery platforms for tissue repair and regeneration by triggering molecules. To reduce the inflammation associated with skin burns, the addition of an anti-inflammatory factor in these scaffolds would greatly increase the quality of the therapy. Therefore, this study is aimed at obtaining and validating a novel multiparticulate system based on a collagen matrix with controlled delivery of flufenamic acid anti-inflammatory drug for burn wound healing applications. In this work, we have characterized the properties and biocompatibility of these multiparticulate drug delivery systems (MDDS) and we have demonstrated their efficiency against burns and soft tissue lesions, particularly when the drug was microencapsulated, and thus with a controlled release. This study contributes to the advancement in therapy of burns and burn wound healing applications.

Optimizing the nanostructure of graphene oxide/silver/arginine for effective wound healing

In this study, we introduce a novel graphene oxide/silver/arginine (GO/Ag/Arg) nanohybrid structure, which can act as an angiogenesis promoter and provide antibacterial nanostructure for improving the wound healing process. GO/Ag nanostructure has been optimized in terms of the GO/Ag mass ratio and pH values using central composite design and the response surface method to increase the Ag loading efficiency. Then, Arg was chemically introduced to the surface of GO/Ag nanostructure. Electrospun polycaprolactone (PCL)-GO/Ag/Arg nanocomposite was successfully fabricated and characterized. The synthesized nanocomposite demonstrated not only a great antibacterial effect on both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacterial species, but appropriate biocompatibility against L929 fibroblastic cell lines. The results demonstrated that the preparation of the PCL-GO/Ag/Arg nanocomposite at a concentration of 1.0 wt% GO/Ag/Arg possessed the best biological and mechanical features. In vivo experiments also revealed that the use of optimized PCL-GO/Ag/Arg nanocomposite, after 12 d of treatment, led to significant increase in the healing process and also regeneration of the wound via reconstruction of a thickened epidermis layer on the wound surface, which was confirmed by histological analysis. In conclusion, the proposed approach can introduce a novel notion for preparing antibacterial material that significantly promotes angiogenesis.

Fluorine-ion-releasing injectable alginate nanocomposite hydrogel for enhanced bioactivity and antibacterial property

The creation of a moist environment and promotion of cell proliferation and migration together with antibacterial property are critical to the wound-healing process. Alginate (Alg) is an excellent candidate for injectable wound dressing materials because it can form a gel in a mild environment. Taking advantage of its gelation property, an injectable nano composite hydrogel containing nano-sized (about 90 nm) calcium fluoride (CaF₂) particles was developed using in-situ precipitation process. The amount of released fluorine (F^-) ion from the nanocomposite hydrogel increased with increasing CaF₂ content inside the composite hydrogel and the ions stimulated both the proliferation and migration of fibroblast cells in vitro. The antibacterial property of the composite hydrogel against E. coli and S. aureus was confirmed through colony formation test where the number of bacterial colonies significantly decreased compared to Alg hydrogel. The in vivo results based on a full-thickness wound model showed that the nanocomposite hydrogel effectively enhanced the deposition of the extracellular matrix compared to that of the Alg hydrogel. This study demonstrates the potential of this nanocomposite hydrogel as a bioactive injectable wound-dressing material with the ability to inhibit bacterial growth and stimulate cell proliferation and migration for accelerated wound healing.

Recent advances in electrospun for drug delivery purpose

Electrospun, an advanced technology, has been successfully employed for fibre production and offers many merits in novel drug delivery systems (DDSs). In recent years, electrospun has gained significant attention and attraction of the scientists in soaring numbers. This technology is superior to other technologies in fabricating the fibres which range from micrometers to manometers scale. The selection of appropriate polymers, electrospun processes and electrospun parameters play important roles in controlling the drug release while, treating serious illness. Besides, electrospraying process has similar characteristics to the electrospun and is presented briefly here. Further, in vivo and in vitro evaluations of the electrospun nanofibers are comprehensively discussed. In addition, the electrospun nanotechnology has been exploited to design drug release systems, investigate drug's pharmacokinetics and further develop DDS. The electrospun nanofibers improve bioactivity of various types of drugs including water-insoluble, soluble, anticancer and antibacterial drugs and genetic materials. In the end, the prospects and challenges in the process of designing drug-loaded electrospun nanofibers are discussed in detail.

Incorporation of antimicrobial peptides on electrospun nanofibres for biomedical applications

The aim of this work was to immobilize antimicrobial peptides onto a fibrous scaffold to create functional wound dressings. The scaffold was produced by electrospinning from a mixture of the water soluble polymers poly(acrylic acid) and poly(vinyl alcohol) and subsequently heat cured at 140 °C to produce a stable material with fibre diameter below micron size. The peptides were incorporated into the negatively charged scaffold by electrostatic interaction. The best results were obtained for lysozyme impregnated at pH 7, which rendered a loading of up to 3.0 × 10-4 mmol mg-1. The dressings were characterized using SEM, ATR-FTIR, elemental analysis, ζ-potential and confocal microscopy using fluorescamine as an amine-reactive probe. The dressings preserved their fibrous structure after impregnation and peptides were distributed homogeneously throughout the fibrous network. The antibacterial activity was assessed by solid agar diffusion tests and growth inhibition in liquid cultures using Staphylococcus aureus, a pathogenic strain generally found in infected wounds. The antibacterial activity caused clear halo inhibition zones for lysozyme-loaded dressings and a 4-fold decrease in S. aureus viable colonies after two weeks of contact of dressings with bacterial liquid cultures. The release profile in different media showed sustained release in acidic environments, and a rapid discharge at high pH values. The incorporation of lysozyme resulted in dressing surfaces essentially free of microbial growth after 14 days of contact with bacteria at pH 7.4 attributed to the peptide that remained attached to the dressing surface.

Controlled self-assembly into diverse stimuli-responsive microstructures: from microspheres to branched cylindrical micelles and vesicles

A series of amphiphilic PDMAEMA-SS-PCL chains with variable ratios of hydrophilic poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) to hydrophobic poly(ε-caprolactone) (PCL) were prepared via ring-opening polymerization, in which the two different moieties were linked via a disulfide bond with reduction responsiveness. After cross-linking by the photodegradable o-nitrobenzyl linkage, the amphiphilic chains could self-assemble into microspheres, branched cylindrical micelles and vesicles, which were responsive to the reduction agent dl-dithiothreitol and UV light irradiation through different mechanisms.

Encapsulation and Characterization of Gentamicin Sulfate in the Collagen Added Electrospun Nanofibers for Skin Regeneration

In the current practice, the clinical use of conventional skin substitutes such as autogenous skin grafts have shown several problems, mainly with respect to limited sources and donor site morbidity. In order to overcome these limitations, the use of smart synthetic biomaterials is tremendously diffusing as skin substitutes. Indeed, engineered skin grafts or analogues frequently play an important role in the treatment of chronic skin wounds, by supporting the regeneration of newly formed tissue, and at the same time preventing infections during the long-term treatment. In this context, natural proteins such as collagen—natively present in the skin tissue—embedded in synthetic polymers (i.e., PCL) allow the development of micro-structured matrices able to mimic the functions and to structure of the surrounding extracellular matrix. Moreover, the encapsulation of drugs, such as gentamicin sulfate, also improves the bioactivity of nanofibers, due to the efficient loading and a controlled drug release towards the site of interest. Herein, we have done a preliminary investigation on the capability of gentamicin sulfate, loaded into collagen-added nanofibers, for the controlled release in local infection treatments. Experimental studies have demonstrated that collagen added fibers can be efficaciously used to administrate gentamicin for 72 h without any toxic in vitro response, thus emerging as a valid candidate for the therapeutic treatment of infected wounds.

Synthesis of a Novel Electrospun Polycaprolactone Scaffold Functionalized with Ibuprofen for Periodontal Regeneration: An In Vitro andIn Vivo Study

Ibuprofen (IBU) has been shown to improve periodontal treatment outcomes. The aim of this study was to develop a new anti-inflammatory scaffold by functionalizing an electrospun nanofibrous poly-ε-caprolactone membrane with IBU (IBU-PCL) and to evaluate its impact on periodontal inflammation, wound healing and regeneration in vitro and in vivo. IBU-PCL was synthesized through electrospinning. The effects of IBU-PCL on the proliferation and migration of epithelial cells (EC) and fibroblasts (FB) exposed to Porphyromonas gingivlais lipopolysaccharide (Pg-LPS) were evaluated through the AlamarBlue test and scratch assay, respectively. Anti-inflammatory and remodeling properties were investigated through Real time qPCR. Finally, the in vivo efficacy of the IBU-PCL membrane was assessed in an experimental periodontitis mouse model through histomorphometric analysis. The results showed that the anti-inflammatory effects of IBU on gingival cells were effectively amplified using the functionalized membrane. IBU-PCL reduced the proliferation and migration of cells challenged by Pg-LPS, as well as the expression of fibronectin-1, collagen-IV, integrin α3β1 and laminin-5. In vivo, the membranes significantly improved the clinical attachment and IBU-PCL also reduced inflammation-induced bone destruction. These data showed that the IBU-PCL membrane could efficiently and differentially control inflammatory and migratory gingival cell responses and potentially promote periodontal regeneration.

Antibacterial and Barrier Properties of Gelatin Coated by Electrospun Polycaprolactone Ultrathin Fibers Containing Black Pepper Oleoresin of Interest in Active Food Biopackaging Applications

The present study evaluated the effect of using electrospun polycaprolactone (PCL) as a barrier coating and black pepper oleoresin (OR) as a natural extract on the morphology, thermal, mechanical, antimicrobial, oxygen, and water vapor barrier properties of solvent cast gelatin (GEL). The antimicrobial activity of the developed multilayer system obtained by the so-called electrospinning coating technique was also evaluated against Staphylococcus aureus strains for 10 days. The results showed that the multilayer system containing PCL and OR increased the thermal resistance, elongated the GEL film, and significantly diminished its permeance to water vapor. Active multilayer systems stored in hermetically closed bottles increased their antimicrobial activity after 10 days by inhibiting the growth of Staphylococcus aureus. This study demonstrates that addition of electrospun PCL ultrathin fibers and OR improved the properties of GEL films, which promoted its potential use in active food packaging applications.

Electrospun Fibers as a Dressing Material for Drug and Biological Agent Delivery in Wound Healing Applications

Wound healing is a complex tissue regeneration process that promotes the growth of new tissue to provide the body with the necessary barrier from the outside environment. In the class of non-healing wounds, diabetic wounds, and ulcers, dressing materials that are available clinically (e.g., gels and creams) have demonstrated only a slow improvement with current available technologies. Among all available current technologies, electrospun fibers exhibit several characteristics that may provide novel replacement dressing materials for the above-mentioned wounds. Therefore, in this review, we focus on recent achievements in electrospun drug-eluting fibers for wound healing applications. In particular, we review drug release, including small molecule drugs, proteins and peptides, and gene vectors from electrospun fibers with respect to wound healing. Furthermore, we provide an overview on multifunctional dressing materials based on electrospun fibers, including those that are capable of achieving wound debridement and wound healing simultaneously as well as multi-drugs loading/types suitable for various stages of the healing process. Our review provides important and sufficient information to inform the field in development of fiber-based dressing materials for clinical treatment of non-healing wounds.