Recent advances in nanomaterials-based electrochemical (bio)sensors for pesticides detection

Electrochemical (Bio)Sensors for the Detection of Organophosphorus Pesticides Based on Nanomaterial-Modified Electrodes: A Review

Organophosphorus pesticides were easily remained in fruits and vegetables which would be harm to the environmental safety and human health. In recent years, due to the simple preparation process, fast response and high sensitivity, the electrochemical (bio)sensors have received increasing attention, which were extensively used as the sensing platform for the detection of OPPs. The mechanisms for the determination of OPPs mainly included redox of nitrophenyl OPPs, enzyme hydrolysis and inhibition, immunosensor, aptasensor. Nowadays, the mainly explored electrode material has focused on metal-organic frameworks, metal and metal derivatives, carbon materials (carbon nanotube, graphene, g-C3N4), MXene, etc. These nanomaterials played important roles in the electrochemical (bio)sensors, which included: (a) as an electrocatalyst to promote the redox reaction, (b) as a carrier to load the enzyme or aptamer, (c) as a recognizer to identify the targets. The nanomaterials-based electrochemical (bio)sensor was a rapid, cost-effective methods to detect OPPs with high sensitivity. Besides, this review compared the analytical performance of different nanomaterials-based electrochemical (bio)sensors, and also identified the key challenges in the future. It would provide new ideas and insights to the further development and application of electrochemical (bio)sensors and the detection of pesticides in real samples.

A direct and simple immobilization route for immunosensors by CNBr activation for covalent attachment of anti-leptin: obesity diagnosis point of view

Leptin is a peptide hormone produced in adipose tissue that works as an antiobesity hormone by balancing energy intake and expenditure. We aimed to develop an ultrasensitive electrochemical immunosensor based on a novel immobilization technique for the early detection of leptin-related diseases in this work. Although several methods for immobilizing antibodies to the biosensor recognition element are known, it is necessary to utilize novel, cost-effective, and less complicated immobilization procedures. When compared with currently utilized immobilization techniques for leptin measurement, this novel method is more efficient, easy to prepare, and sensitive, with a broad detection range. Indium tin oxide-coated polyethylene terephthalate (ITO-PET) sheets were used as the working electrode. ITO-PET sheets were modified using cyanogen bromide (CNBr) to immobilize the anti-leptin antibody through covalent interactions. Each stage of the proposed biosensors was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) methods, and extensive characterization studies were carried out. The designed biosensor has a wide linear detection range (0.05-100 pg/mL), low limits of detection (LOD) (0.0086 pg/mL) and quantification (LOQ) (0.0287 pg/mL). It was concluded that although it is disposable, the ITO-PET working electrode retains its activity even in repeated studies. In addition, the new immobilization procedure provided by CNBr for the designed biosensor fabrication can be effectively used in other biosensing applications.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-03096-w.

Electrical and Electrochemical Sensors Based on Carbon Nanotubes for the Monitoring of Chemicals in Water-A Review

Carbon nanotubes (CNTs) combine high electrical conductivity with high surface area and chemical stability, which makes them very promising for chemical sensing. While water quality monitoring has particularly strong societal and environmental impacts, a lot of critical sensing needs remain unmet by commercial technologies. In the present review, we show across 20 water monitoring analytes and 90 references that carbon nanotube-based electrochemical sensors, chemistors and field-effect transistors (chemFET) can meet these needs. A set of 126 additional references provide context and supporting information. After introducing water quality monitoring challenges, the general operation and fabrication principles of CNT water quality sensors are summarized. They are sorted by target analytes (pH, micronutrients and metal ions, nitrogen, hardness, dissolved oxygen, disinfectants, sulfur and miscellaneous) and compared in terms of performances (limit of detection, sensitivity and detection range) and functionalization strategies. For each analyte, the references with best performances are discussed. Overall, the most frequently investigated analytes are H+ (pH) and lead (with 18% of references each), then cadmium (14%) and nitrite (11%). Micronutrients and toxic metals cover 40% of all references. Electrochemical sensors (73%) have been more investigated than chemistors (14%) or FETs (12%). Limits of detection in the ppt range have been reached, for instance Cu(II) detection with a liquid-gated chemFET using SWCNT functionalized with peptide-enhanced polyaniline or Pb(II) detection with stripping voltammetry using MWCNT functionalized with ionic liquid-dithizone based bucky-gel. The large majority of reports address functionalized CNTs (82%) instead of pristine or carboxyl-functionalized CNTs. For analytes where comparison is possible, FET-based and electrochemical transduction yield better performances than chemistors (Cu(II), Hg(II), Ca(II), H2O2); non-functionalized CNTs may yield better performances than functionalized ones (Zn(II), pH and chlorine).

Electrochemical biosensor based on CuPt alloy NTs-AOE for the ultrasensitive detection of organophosphate pesticides

The electrode material is vital for the performance of the electrochemical biosensor. Lately, many nanomaterials have been developed to improve the sensitivity and detection efficiency of the biosensors. In this work, a kind of one-dimensional nanomaterials, the CuPt alloy nanotubes with an open end (CuPt alloy NTs-AOE), was explored. The nanotubes with an open end can provide a larger electrochemical active surface area and more active sites for the immobilization of enzyme. The CuPt alloy displays excellent conductivity and catalytic activity. In addition, the Cu shows the great affinity to thio-compounds, which can greatly enhance the detection efficiency and sensitivity. As a result, the prepared biosensor demonstrates the wider linear range of 9.98 × 10^-10-9.98 × 10^-5g l^-1for fenitrothion and 9.94 × 10^-11-9.94 × 10^-4g l^-1for dichlorvos (as model OPs ) and with the lower detection limit of 1.84 × 10^-10g l^-1and 6.31 × 10^-12g l^-1(S/N = 3), respectively. Besides, the biosensor has been used to detect the real samples and obtains satisfactory recoveries (95.58%-100.56%).

Facile synthesis of petal-like VS2 anchored onto graphene nanosheets for the rapid sensing of toxic pesticide in polluted water

Fenitrothion (FT) is a toxic phosphorothioate insecticide that can easily contaminate aquatic environments, leading to a detrimental effect on the aquatic species and harmful endocrine disrupter effects on human health. Therefore, it is vital to develop a reliable methodology for the accurate and precise real-time sensing of carcinogenic FT in water samples at trace concentration to ensure environmental safety. We aim to fabricate the low-cost VS2-attached reduced graphene oxide (RGO) sheets via a simple hydrothermal approach. It was further applied for the rapid and accurate sensing of toxic FT. The VS2/RGO-composite delivers a more favorable microenvironment for the rapid electrocatalytic sensing performance towards toxic FT reduction than the VS2 and RGO modified electrodes. The electron transfer rate constant (ks) and the saturating absorption capacity (Γ) value of FT was evaluated to be 1.52 s-1 and 2.18 × 10-10 mol cm-2, respectively. The constructed sensor exhibits a wide linear relationship after amperometry between the cathodic current densities and the concentrations of FT in the range of 5-90 nM and high sensitivity (5.569 μA nM-1 cm-2); moreover, the detection limit was 0.07 nM (S/N = 3). The fabricated sensor has excellent anti-interference ability and reproducibility for the direct sensing of FT in river water, seawater, and lake water samples with acceptable recoveries. It is a promising sensing device for in-situ quantification of FT in agricultural products and ecological systems.

Multivariate Assessment of Procedures for Molecularly Imprinted Polymer Synthesis for Pesticides Determination in Environmental and Agricultural Samples

In the case of quantitative and qualitative analysis of pesticides in environmental and food samples, it is required to perform a sample pre-treatment process. It allows to minimalize the impact of interferences on the final results, as well as increase the recovery rate. Nowadays, apart from routinely employed sample preparation techniques such as solid-phase extraction (SPE) or solid-phase microextraction (SPME), the application of molecularly imprinted polymers (MIPs) is gaining greater popularity. It is mainly related to their physicochemical properties, sorption capacity and selectivity, thermo-mechanical resistance, as well as a wide range of polymerization techniques allowing to obtain the desired type of sorption materials, adequate to a specific type of pesticide. This paper targets to summarize the most popular and innovative strategies since 2010, associated with the MIPs synthesis and analytical procedures for pesticides determination in environmental and food samples. Application of multi-criteria decision analysis (MCDA) allows for visualization of the most beneficial analytical procedures in case of changing the priority of each step of analysis (MIPs synthesis, sample preparation process—pesticides extraction, chromatographic analysis) bearing in mind metrological and environmental issues.

Assessment of pesticide induced inhibition of Apis mellifera (honeybee) acetylcholinesterase by means of N-doped carbon dots/BSA nanocomposite modified electrochemical biosensor

This work describes the development and optimization of an electrochemical method to evaluate pesticide induced inhibition of honey bee (Apis mellifera) acetylcholinesterase (AChE) by means of acetylcholinesterase biosensor. The inhibition assay was based on the detection of changes in electrochemical activity of the enzyme caused by pesticide. As transducer, nitrogen doped carbon dots BSA (N-CD/BSA) nanocomposite electrodeposited on pencil graphite electrode was used to covalently immobilize AChE. The as-synthesized nanocomposite and fabricated electrodes were characterized for the structural, functional and electrochemical properties. Nanocomposite promoted the electron transfer reaction to catalyze the electro-oxidation of thiocholine and a large current response was obtained by cyclic voltammetry at 0.77 V, indicating successful immobilization of AChE. The sensitivity of Diazinon, an OP insecticide, for honeybee AChE was tested under optimal conditions and a linear response ranging 10-250 nM was obtained with a detection limit of 8.9 nM, and sensitivity 9 uA/nM/cm². The method showed a good operational reproducibility and selectivity of biosensor. Further, the molecular docking provided additional support to the experimental data suggesting irreversible nature and contact toxicity of the pesticide for honey bee AChE. The developed biosensor has proved useful for the diazinon detection in wheat samples with 99% recovery rate.

Peptide nanotube functionalized molecularly imprinted polydopamine based single-use sensor for impedimetric detection of malathion

In the present study, a peptide nanotube functionalized polydopamine (p-Dop) based molecularly imprinted (MIP) sensor system was constructed, characterized, and studied for the impedimetric sensing of an organophosphorus pesticide, malathion (MLT). Electropolymerization in the presence of a template (MLT) was utilized as a convenient and effective strategy to generate imprinted p-Dop films on peptide nanotubes (PNTs) modified graphite electrodes (PGEs). Upon the removal of template, the adsorption of MLT on the specific cavities formed in the MIP film was tracked using electrochemical impedance spectroscopy (EIS). To attain optimal sensor response, experimental conditions, such as film thickness, analyte/functional monomer ratio, and desorption/adsorption time, were analyzed. The obtained MIP(p-Dop)-PNT-PGE sensor exhibited high sensitivity for electrochemical MLT analysis with a wide dynamic detection range of 13 pg mL^-1 - 1.3 µg mL^-1 and a LOD of 1.39 pg mL^-1. The combination of a bio-inspired p-Dop-based MIP with the EIS technique allowed excellent sensitivity and selectivity toward MLT sensing which also yielded high recoveries in real samples. The success of this research strategy in real samples revealed its potential for various future environmental applications.

Applications of covalent organic frameworks and their composites in the extraction of pesticides from different samples

Pesticides are used extensively in a wide range of applications and due to their high rate of consumption, they are ubiquitous in the different media and samples like environment, water sources, air, soil, biological materials, wastes (liquids, solids or sludges), vegetables and fruits, where they can persist for long periods. Pesticides often have hazardous side effects and can cause a range of harmful diseases like Parkinson, Alzheimer, asthma, depression and anxiety, cancer, etc, even at low concentrations. To this end, extraction, pre-concentration and determination of pesticides from various samples presents significant challenges caused by sample complexity and the low concentrations of them in many samples. Often, direct extraction and determination of pesticides are impossible due to their low concentrations and the complexity of samples. The main goals of sample preparation are removing interfering species, pre-concentrating target analyte/s and converting the analytes into more stable forms (when needed). The most popular approach is solid-phase extraction due to its simplicity, efficiency, ease of operation and low cost. This method is based on using a wide variety of materials, among which covalent organic frameworks (COFs) can be identified as an emerging class of highly versatile materials exhibiting advantageous properties, such as a porous and crystalline structure, pre-designable structure, high physical and chemical stability, ease of modification, high surface area and high adsorption capacity. The present review will cover recent developments in synthesis and applications of COFs and their composites for extraction of pesticides, different synthesis approaches of COFs, possible mechanisms for interaction of COFs-based adsorbents with pesticides and finally, future prospects and challenges in the fabrication and utilization of COFs and their composites for extraction of pesticides.

A paper-based chemiluminescence detection device based on S,N-doped carbon quantum dots for the selective and highly sensitive recognition of bendiocarb

Bendiocarb, a type of carbamate pesticide, plays a crucial role in controlling a wide range of pests. Due to its harmful impact on humans and the environment, the need for inexpensive, portable, efficient and easy-to-use analytical devices has become essential. In this study, an environmentally friendly paper-based analytical device (PAD) with a chemiluminescence (CL) sensing platform was investigated and characterized for the facile, reliable and sensitive detection of the bendiocarb pesticide. It is based on the enhancing effect of SO32- on the CL reaction of sulfur, nitrogen-doped carbon quantum dots (S,N-CQDs)-KMnO4 in acidic media. According to the experiments, S,N-CQDs and SO32- both are oxidized by KMnO4 to generate (S,N-CQDs*) and (SO2*) in their excited states, emitting at 510 nm. This indicates that an energy transfer process is taking place from SO2* to S,N-CQDs, resulting in a remarkably intensified CL emission. Interestingly, another emission was also observed around 660 nm contributing to about 20 to 25% of the total CL emission. This emission is related to the Mn2+* species produced by reducing MnO4-. The established multi-emission CL system was tested for analytical applications. Under optimal experimental conditions, a good linear relationship was observed between the bendiocarb concentration and the CL intensity of the established CL system. The linear detection range was 0.1-10 μg mL-1, with a limit of detection (LOD) of 0.02 μg mL-1. Finally, the method was successfully applied for the measurements of bendiocarb in water and juice samples. The obtained recovery values (97.5-105.5) verified the suitable accuracy of the results.

Synergizing Functional Nanomaterials with Aptamers Based on Electrochemical Strategies for Pesticide Detection: Current Status and Perspectives

Owing to the high toxicity and large-scale use of pesticides, it is imperative to develop selective, sensitive, portable, and convenient sensors for rapid monitoring of pesticide. Therefore, the electrochemical detection platform offers a promising analytical approach since it is easy to operate, economical, efficient, and user-friendly. Meanwhile, with advances in functional nanomaterials and aptamer selection technologies, numerous sensitivity-enhancement techniques alongside a widespread range of smart nanomaterials have been merged to construct novel aptamer probes to use in the biosensing field. Hence, this study intends to highlight recent development and promising applications on the functional nanomaterials with aptamers for pesticides detection based on electrochemical strategies. We also reviewed the current novel aptamer-functionalized microdevices for the portability of pesticides sensors. Furthermore, the major challenges and future prospects in this field are also discussed to provide ideas for further research.

Fluorescence-Based Sensing of Pesticides Using Supramolecular Chemistry

The detection of pesticides in real-world environments is a high priority for a broad range of applications, including in areas of public health, environmental remediation, and agricultural sustainability. While many methods for pesticide detection currently exist, the use of supramolecular fluorescence-based methods has significant practical advantages. Herein, we will review the use of fluorescence-based pesticide detection methods, with a particular focus on supramolecular chemistry-based methods. Illustrative examples that show how such methods have achieved success in real-world environments are also included, as are areas highlighted for future research and development.

Mathematical Modelling of Biosensing Platforms Applied for Environmental Monitoring

In recent years, mathematical modelling has known an overwhelming integration in different scientific fields. In general, modelling is used to obtain new insights and achieve more quantitative and qualitative information about systems by programming language, manipulating matrices, creating algorithms and tracing functions and data. Researchers have been inspired by these techniques to explore several methods to solve many problems with high precision. In this direction, simulation and modelling have been employed for the development of sensitive and selective detection tools in different fields including environmental control. Emerging pollutants such as pesticides, heavy metals and pharmaceuticals are contaminating water resources, thus threatening wildlife. As a consequence, various biosensors using modelling have been reported in the literature for efficient environmental monitoring. In this review paper, the recent biosensors inspired by modelling and applied for environmental monitoring will be overviewed. Moreover, the level of success and the analytical performances of each modelling-biosensor will be discussed. Finally, current challenges in this field will be highlighted.

An insect acetylcholinesterase biosensor utilizing WO3/g-C3N4 nanocomposite modified pencil graphite electrode for phosmet detection in stored grains

This study was undertaken to assess the potential of Tribolium castaneum (Red flour beetle) acetylcholinesterase (Tc-AChE) based electrochemical biosensor integrating WO₃/g-C₃N₄ nanocomposite modified Pencil graphite electrode to detect an organophosphate insecticide, Phosmet. The WO₃/g-C₃N₄ nanocomposite provides a non-toxic, biocompatible surface for binding the enzyme on the electrode surface, attributed to its large surface area, high conductivity, and low ohmic resistance. The proposed biosensor shows a very good analytical performance with LOD 3.6 nM for Phosmet and effectively determined Phosmet in wheat with a 99% recovery rate. Furthermore, molecular docking deciphers the binding interactions of Phosmet with Tc-AChE using a modified AutoDock LGA algorithm and an AMBER03 force field in YASARA. The kinetic parameters strongly suggest the high potency of inhibitor with the enzyme. This study presents an adaptable, rapid, and straightforward approach that opens ways towards real progress in developing commercial biosensors for pesticide detection.