Spray- and spin-assisted layer-by-layer assembly of copper nanoparticles on thin-film composite reverse osmosis membrane for biofouling mitigation

Superhydrophilic Functionalization of Microfiltration Ceramic Membranes Enables Separation of Hydrocarbons from Frac and Produced Water

The environmental impact of shale oil and gas production by hydraulic fracturing (fracking) is of increasing concern. The biggest potential source of environmental contamination is flowback and produced water, which is highly contaminated with hydrocarbons, bacteria and particulates, meaning that traditional membranes are readily fouled. We show the chemical functionalisation of alumina ceramic microfiltration membranes (0.22 μm pore size) with cysteic acid creates a superhydrophilic surface, allowing for separation of hydrocarbons from frac and produced waters without fouling. The single pass rejection coefficients was >90% for all samples. The separation of hydrocarbons from water when the former have hydrodynamic diameters smaller than the pore size of the membrane is due to the zwitter ionically charged superhydrophilic pore surface. Membrane fouling is essentially eliminated, while a specific flux is obtained at a lower pressure (<2 bar) than that required achieving the same flux for the untreated membrane (4-8 bar).

Mussel-Inspired Architecture of High-Flux Loose Nanofiltration Membrane Functionalized with Antibacterial Reduced Graphene Oxide-Copper Nanocomposites

Graphene-based nanocomposites have a vast potential for wide-ranging antibacterial applications due to the inherently strong biocidal activity and versatile compatibility of such nanocomposites. Therefore, graphene-based functional nanomaterials can introduce enhanced antibiofouling and antimicrobial properties to polymeric membrane surfaces. In this study, reduced graphene oxide-copper (rGOC) nanocomposites were synthesized as newly robust biocides via in situ reduction. Inspired by the emerging method of bridging ultrafiltration membrane surface cavities, loose nanofiltration (NF) membranes were designed using a rapid (2 h) bioinspired strategy in which rGOC nanocomposites were firmly codeposited with polydopamine (PDA) onto an ultrafiltration support. A series of analyses (SEM, EDS, XRD, XPS, TEM, and AFM) confirmed the successful synthesis of the rGO-Cu nanocomposites. The secure loading of rGOC composites onto the membrane surfaces was also confirmed by SEM and AFM images. Water contact angle results display a high surface hydrophilicity of the modified membranes. The PDA-rGOC functionalization layer facilitated a high water permeability (22.8 L m^-2 h^-1 bar^-1). The PDA-rGOC modification additionally furnished the membrane with superior separation properties advantageous for various NF applications such as dye purification or desalination, as ultrahigh (99.4% for 0.5 g L^-1 reactive blue 2) dye retention and high salt permeation (7.4% for 1.0 g L^-1 Na₂SO₄, 2.5% for 1.0 g L^-1 NaCl) was achieved by the PDA-rGOC-modified membranes. Furthermore, after 3 h of contact with Escherichia coli (E. coli) bacteria, the rGOC-functionalized membranes exhibited a strong antibacterial performance with a 97.9% reduction in the number of live E. coli. This study highlights the use of rGOC composites for devising loose NF membranes with strong antibacterial and separation performance.

High-flux polyamide reverse osmosis membranes by surface grafting 4-(2-hydroxyethyl)morpholine

A surface grafted PA RO membrane with 4-(2-hydroxyethyl)morpholine was fabricated to improve water flux.

Surface-independent one-pot chelation of copper ions onto filtration membranes to provide antibacterial properties

Surface-independent one-pot chelation of copper ions onto filtration membranes to provide antibacterial properties.