Wastewater treatment plants act as essential sources of microplastic formation in aquatic environments: A critical review

A review on mechanistic understanding of microplastic pollution on the performance of anaerobic digestion

Anaerobic digestion (AD) has emerged as a promising technology for diverting the organic waste from the landfills along with the production of clean energy. AD is a microbial-driven biochemical process wherein the plethora of microbial communities participate in converting the putrescible organic matter into biogas. Nevertheless, the AD process is susceptible to the external environmental factors such as presence of physical (microplastics) and chemical (antibiotics, pesticides) pollutants. The microplastics (MPs) pollution has received recent attention due to the increasing plastic pollution in terrestrial ecosystems. This review was aimed for holistic assessment of impact of MPs pollution on AD process to develop efficient treatment technology. First, the possible pathways of MPs entry into the AD systems were critically evaluated. Further, the recent literature on the experimental studies pertaining to the impact of different types of MPs at different concentrations on the AD process was reviewed. In addition, several mechanisms such as direct exposure of MPs on the microbial cells, indirect impact of MPs through the leaching of toxic chemicals and reactive oxygen species (ROS) formation on AD process were elucidated. Besides, the risk possessed by the increase of antibiotic resistance genes (ARGs) after the AD process due to the MPs stress on microbial communities were discussed. Overall, this review deciphered the severity of MPs pollution on AD process at different levels.

Microplastic burden in invasive signal crayfish (Pacifastacus leniusculus) increases along a stream urbanization gradient

Microplastics are a globally pervasive pollutant with the potential to directly impact species and accumulate in ecosystems. However, there remains a relative paucity of research addressing their accumulation in freshwater ecosystems and a near absence of work in crayfish, despite their high ecological and economic importance. This study investigated the presence of microplastics in the invasive signal crayfish Pacifastacus leniusculus along a stream urbanization gradient. The results demonstrate a ubiquitous presence of microplastics in crayfish digestive tracts at all sites and provide the first evidence of microplastic accumulation in tail tissue. Evidence of a positive linear trend was demonstrated between microplastic concentration in crayfish and upstream urban area size in generalized linear models. Evidence for a positive effect of the upstream urban area and a negative effect of crayfish length on microplastic concentrations in crayfish was demonstrated in multiple generalized linear regression models. Our results extend the current understanding of microplastics presence in freshwater ecosystems and demonstrate their presence in crayfish in the wild for the first time.

Presence, variation, and potential ecological impact of microplastics in the largest shallow lake of Central Europe

The presence of microplastics (MPs) in the global ecosystem has generated a rapidly growing concern worldwide. Although their presence in the marine environment has been well-studied, much less data are available on their abundance in freshwaters. MPs alone and in combination with different chemicals has been shown to cause acute and chronic effects on algae and aquatic invertebrate and vertebrate species at different biological levels. However, the combined ecotoxicological effects of MPs with different chemicals on aquatic organisms are still understudied in many species and the reported data are often controversial. In the present study, we investigated, for the first time, the presence of MPs in Lake Balaton, which is the largest shallow lake of Central Europe and an important summer holiday destination. Moreover, we exposed neonates of the well-established ecotoxicological model organism Daphnia magna to different MPs (polystyrene [3 μm] or polyethylene [≤ 100 μm]) alone and in combination with three progestogen compounds (progesterone, drospirenone, levonorgestrel) at an environmentally relevant concentration (10 ng L^-1) for 21 days. The presence of 7 polymer types of MPs in the size range of 50-100 μm was detected in Lake Balaton. Similarly to the global trends, polypropylene and polyethylene MPs were the most common types of polymer. The calculated polymer-independent average particle number was 5.5 particles m^-3 (size range: 50 μm - 100 μm) which represents the values detected in other European lakes. Our ecotoxicological experiments confirmed that MPs and progestogens can affect D. magna at the behavioral (body size and reproduction) and biochemical (detoxification-related enzyme activity) levels. The joint effects were negligible. The presence of MPs may lead to reduced fitness in the aquatic biota in freshwaters such as Lake Balaton, however, the potential threat of MPs as vectors for progestogens may be limited.

Spatial distribution characteristics and migration of microplastics in surface water, groundwater and sediment in karst areas: The case of Yulong River in Guilin, Southwest China

Karst regions, due to their unique topography, may be more susceptible to contaminants such as microplastics from other ecosystems. However, few studies reported the occurrence of microplastics in karst areas. Here, we investigated the abundance of microplastics in surface water, sediments and groundwater. In addition, their spatial distribution characteristics and migration were also analyzed in a typical karst area, Yulong River, Guilin, China. Microplastic pollution was found in the sediments, surface water and especially groundwater in Yulong River. The abundance of microplastics was 0-4 items/L, 247-1708 items/kg and 0-4 items/L in surface water, sediments and groundwater, respectively. Microplastics in surface water and groundwater were fiber-based, while those in sediments were fragment-based. Polypropylene (PP), Polystyrene (PS) and Polyethylene terephthalate (PET) are dominant microplastic types in Yulong River. Moreover, the abundance of microplastic pollution in different functional areas ranked as follows: living area > agricultural area > landscape area. Clustering analysis showed that disposable tableware and plastic bags used in tourism activities might be the main source of microplastics. More importantly, our findings suggested that microplastics in groundwater could be the result of hydraulic exchange between groundwater and surface water in karst areas, rather than soil infiltration. These findings provided us with a further understanding of the pollution of microplastics in karst rivers.

Microplastics in different water samples (seawater, freshwater, and wastewater): Removal efficiency of membrane treatment processes

The distribution and fate of microplastics in different water sources and their treatment plants (seawater, three municipal wastewaters, a pharmaceutical factory wastewater, and three drinking waters) in France were studied. Currently, research in this field is still under exploration since almost no relevant standards or policies have been introduced for the detection, the removal, or the discharge of microplastics. This study used an improved quantitative and qualitative analytical methodology for microplastic detection by μ-FTIR carried out with siMPle analytical software. By investigation, wastewater was determined to contain the most abundant microplastics in quantity (4,203-42,000 MP·L^-1), then followed by surface water/groundwater (153-19,836 MP·L^-1) and seawater (around 420 MP·L^-1). Polyethylene was the dominant material in almost all water types followed by polypropylene, polystyrene, and polyethylene terephthalate. Almost all treatment technologies could remove microplastics whatever the feed water types and concentration of microplastics, though some treatment processes or transport pipes could cause additional contamination from microplastics. The four WWTPs, three DWTPs, and SWTP in France provided, respectively, 87.8-99.8%, 82.3-99.9%, 69.0-96.0% removal/retention of MPs in quantity, and provided 97.3-100%, 91.9-99.9%, 92.2-98.1% removal/retention of MPs in surface area. Moreover, ultrafiltration was confirmed to be an effective technology for microplastic retention and control of dimensions of microplastics in smaller ranges both in field-scale and lab-scale experiments. The 200 kDa ultrafiltration membrane could retain 70-100% and 80-100% of microplastics in quantity and in surface area, respectively.

Distribution and removal mechanism of microplastics in urban wastewater plants systems via different processes

Microplastic pollution threatens water systems worldwide. As one of the most important parts of city wastewater treatment, wastewater treatment plants are not only microplastics interception barriers but also emission sources. Water samples were collected from each sewage treatment plant stage and sludge from the sludge dewatering room. Microplastics were extracted using wet peroxide oxidation and flotation, and the abundance, size, shape, and polymer type of microplastics were detected. Basis on the results, the influence of each process on the removal rate and characteristics of microplastics under the same influent source was analysed. The influent microplastic concentration in this study was 32.5 ± 1.0 n/L, which rapidly decreased after treatment. The removal rates of the sequencing batch reactor activated sludge, cyclic activated sludge, and anaerobic anoxic oxic technologies were 73.0%, 75.6%, and 83.9%, respectively. Most microplastics were transported to the sludge, and the concentration of microplastics in dehydrated sludge was 27.2 ± 3.1 n/g. Microplastics removal occurred primarily during the primary and secondary stages. Disposal processes, settling time, and process design affected wastewater treatment plant microplastic removal rates at each stage. Significant differences in microplastic characteristics were observed at each stage, with the most abundant being fragment shaped, particle sizes of 30-100 μm, and black in colour. Sixteen polymer types were identified using a Raman spectrometer. The predominant polymers are polypropylene, polyethylene, and polyethylene terephthalate. This study demonstrates that optimising the process design of existing wastewater treatment plants is crucial for the prevention and control of microplastic pollution. It is suggested that the process settings of contemporary wastewater treatment plants should be studied in depth to develop a scientific foundation for avoiding and managing microplastic pollution in urban areas.

Plastic waste in sandy beaches and surface water in Thanh Hoa, Vietnam: abundance, characterization, and sources

The occurrence and characterization of marine debris on beaches bring opportunities to track back the anthropogenic activities around shorelines as well as aid in waste management and control. In this study, the three largest beaches in Thanh Hoa (Vietnam) were examined for plastic waste, including macroplastics (≥ 5 mm) on sandy beaches and microplastics (MPs) (< 5 mm) in surface water. Among 3803 items collected on the beaches, plastic waste accounted for more than 98%. The majority of the plastic wastes found on these beaches were derived from fishing boats and food preservation foam packaging. The FT-IR data indicated that the macroplastics comprised 77% polystyrene, 17% polypropylene, and 6% high-density polyethylene, while MPs discovered in surface water included other forms of plastics such as polyethylene- acrylate, styrene/butadiene rubber gasket, ethylene/propylene copolymer, and zein purified. FT-IR data demonstrated that MPs might also be originated from automobile tire wear, the air, and skincare products, besides being degraded from macroplastics. The highest abundance of MPs was 44.1 items/m³ at Hai Tien beach, while the lowest was 15.5 items/m³ at Sam Son beach. The results showed that fragment form was the most frequent MP shape, accounting for 61.4 ± 14.3% of total MPs. MPs with a diameter smaller than 500 μm accounted for 70.2 ± 7.6% of all MPs. According to our research, MPs were transformed, transported, and accumulated due to anthropogenic activities and environmental processes. This study provided a comprehensive knowledge of plastic waste, essential in devising long-term development strategies in these locations.