Oligomeric structure of Escherichia coli primary replicative helicase DnaB protein

The oligomeric T4 primase is the functional form during replication

Replisome DNA primases are responsible for the synthesis of short RNA primers required for the initiation of repetitive Okazaki fragment synthesis on the lagging strand during DNA replication. In bacteriophage T4, the primase (gp61) interacts with the helicase (gp41) to form the primosome complex, an interaction that greatly stimulates the priming activity of gp61. Because gp41 is hexameric, a question arises as to whether gp61 also forms a hexameric structure during replication. Several results from this study support such a structure. Titration of the primase/single-stranded DNA binding followed by fluorescence anisotropy implicated a 6:1 stoichiometry. The observed rate constant, k(cat), for priming was found to increase with the primase concentration, implicating an oligomeric form of the primase as the major functional species. The generation of hetero-oligomeric populations of the hexameric primase by controlled mixing of wild type and an inactive mutant primase confirmed the oligomeric nature of the most active primase form. Mutant primases defective in either the N- or C-terminal domains and catalytically inactive could be mixed to create oligomeric primases with restored catalytic activity suggesting an active site shared between subunits. Collectively, these results provide strong evidence for the functional oligomerization of gp61. The potential roles of gp61 oligomerization during lagging strand synthesis are discussed.

Crystal and Solution Structures of the Helicase-binding Domain of Escherichia coli Primase

During bacterial DNA replication, the DnaG primase interacts with the hexameric DnaB helicase to synthesize RNA primers for extension by DNA polymerase. In Escherichia coli, this occurs by transient interaction of primase with the helicase. Here we demonstrate directly by surface plasmon resonance that the C-terminal domain of primase is responsible for interaction with DnaB6. Determination of the 2.8-angstroms crystal structure of the C-terminal domain of primase revealed an asymmetric dimer. The monomers have an N-terminal helix bundle similar to the N-terminal domain of DnaB, followed by a long helix that connects to a C-terminal helix hairpin. The connecting helix is interrupted differently in the two monomers. Solution studies using NMR showed that an equilibrium exists between a monomeric species with an intact, extended but naked, connecting helix and a dimer in which this helix is interrupted in the same way as in one of the crystal conformers. The other conformer is not significantly populated in solution, and its presence in the crystal is due largely to crystal packing forces. It is proposed that the connecting helix contributes necessary structural flexibility in the primase-helicase complex at replication forks.

Architecture of the bacteriophage T4 primosome: electron microscopy studies of helicase (gp41) and primase (gp61)

Replication of DNA requires helicase and primase activities as part of a primosome assembly. In bacteriophage T4, helicase and primase are separate polypeptides for which little structural information is available and whose mechanism of association within the primosome is not yet understood. Three-dimensional structural information is provided here by means of reconstructions from electron microscopic images. Structures have been calculated for complexes of each of these proteins with ssDNA in the presence of MgATPgammaS. Both the helicase (gp41) and primase (gp61) complexes are asymmetric hexagonal rings. The gp41 structure suggests two distinct forms that have been termed "open" and "closed." The gp61 structure is clearly a six-membered ring, which may be a trimer of dimers or a traditional hexamer of monomers. This structure provides conclusive evidence for an oligomeric primase-to-ssDNA stoichiometry of 6:1.

Multiple full-length NS3 molecules are required for optimal unwinding of oligonucleotide DNA in vitro

NS3 (nonstructural protein 3) from the hepatitis C virus is a 3' --> 5' helicase classified in helicase superfamily 2. The optimally active form of this helicase remains uncertain. We have used unwinding assays in the presence of a protein trap to investigate the first cycle of unwinding by full-length NS3. When the enzyme was in excess of the substrate, NS3 (500 nM) unwound >80% of a DNA substrate containing a 15-nucleotide overhang and a 30-bp duplex (45:30-mer; 1 nM). This result indicated that the active form of NS3 that was bound to the DNA prior to initiation of the reaction was capable of processive DNA unwinding. Unwinding with varying ratios of NS3 to 45:30-mer allowed us to investigate the active form of NS3 during the first unwinding cycle. When the substrate concentration slightly exceeded that of the enzyme, little or no unwinding was observed, indicating that if a monomeric form of the protein is active, then it exhibits very low processivity. Binding of NS3 to the 45:30-mer was measured by electrophoretic mobility shift assays, resulting in K(D) = 2.7 +/- 0.4 nM. Binding to individual regions of the substrate was investigated by measuring the K(D) for a 15-mer oligonucleotide as well as a 30-mer duplex. NS3 bound tightly to the 15-mer (K(D) = 1.3 +/- 0.2 nM) and, surprisingly, fairly tightly to the double-stranded 30-mer (K(D) = 11.3 +/- 1.3 nM). However, NS3 was not able to rapidly unwind a blunt-end duplex. Thus, under conditions of optimal unwinding, the 45:30-mer is initially saturated with the enzyme, including the duplex region. The unwinding data are discussed in terms of a model whereby multiple molecules of NS3 bound to the single-stranded DNA portion of the substrate are required for optimal unwinding.

Unzipping mechanism of the double-stranded DNA unwinding by a hexameric helicase: the effect of the 3' arm and the stability of the dsDNA on the unwinding activity of the Escherichia coli DnaB helicase

The effect of two structural elements of a replication DNA fork substrate, the length of the 3' arm of the fork and the stability of the double-stranded DNA (dsDNA) part, on the kinetics of the dsDNA unwinding by the Escherichia coli hexameric helicase DnaB protein has been examined under single turnover conditions using the rapid quench-flow technique. The length of the 3' arm of the replication fork, i.e. the number of nucleotides in the arm, is a major structural factor that controls the unwinding rate and processivity of the helicase. The data show the existence of an optimal length of the 3' arm where there is the highest unwinding rate and processivity, indicating that during the unwinding process, the helicase transiently interacts with the 3' arm at a specific distance on the arm with respect to the duplex part of the DNA. Moreover, the area on the enzyme that engages in interactions has also a discrete size. For DNA substrates with the 3' arm containing 14, or less, nucleotide residues, the DnaB helicase becomes a completely distributive enzyme. However, the 3' arm is not a "specific activating cofactor" in the unwinding reaction. Rather, the 3' arm plays a role as a mechanical fulcrum for the enzyme, necessary to provide support for the advancing large helicase molecule on the opposite strand of the DNA. Binding of ATP is necessary to engage the 3' arm with the DnaB helicase, but it does not change the initial distribution of complexes of the enzyme with the DNA fork substrate. Stability of the dsDNA has a significant effect on the unwinding rate and processivity. The unwinding rate constant is a decreasing linear function of the fractional content of GC base-pairs in the dsDNA, indicating that the activation of the unwinding step is proportional to the stability of the nucleic acid.

Unzipping mechanism of the double-stranded DNA unwinding by a hexameric helicase: quantitative analysis of the rate of the dsDNA unwinding, processivity and kinetic step-size of the Escherichia coli DnaB helicase using rapid quench-flow method

Kinetics of the double-stranded (ds) DNA unwinding by the Escherichia coli replicative helicase DnaB protein has been examined under single-turnover conditions using the chemical quench-flow technique. The unwinding reaction proceeds through an initial conformational transition followed by the unwinding catalytic steps and the release of the single-stranded (ss) DNA. Analyses of the reaction as a function of the number of base-pairs in the dsDNA reveal that the number of catalytic steps is not strictly proportional to the length of the dsDNA. As the helicase approaches the end of the substrate, the remaining approximately 11 bp of the DNA melts without catalytic participation of the enzyme. The kinetic step-size of the DnaB helicase, i.e. the number of the base-pairs unwound in a single catalytic step is only 1.4(+/- 0.2). The low value of the step-size indicates that the helicase unwinds a single base-pair in a single catalytic step. Thus, the DnaB helicase unzips the dsDNA in a reverse process to the zipping mechanism of the non-enzymatic double helix formation. The protein is a fast helicase that at 25 degrees C unwinds approximately 291 bp/s, much faster than previously thought, and the unwinding rate can be much higher at higher temperatures. However, the ATP-state of the enzyme has an increased dissociation rate, resulting in only a moderate unwinding processivity, P = 0.89(+/- 0.03), little dependent on the temperature. The conformational transition of the DnaB helicase-DNA complex, preceding the unwinding, is an intrinsic transition of the enzyme from the stationary conformation to the ATP-state of the helicase.

Interactions of the RepA helicase hexamer of plasmid RSF1010 with the ssDNA. Quantitative analysis of stoichiometries, intrinsic affinities, cooperativities, and heterogeneity of the total ssDNA-binding site

Interactions between the replicative RepA helicase hexamer of plasmid RSF1010 with the single-stranded DNA (ssDNA) have been studied, using the quantitative fluorescence titration, analytical sedimentation velocity, and sedimentation equilibrium techniques. Experiments were performed with fluorescein-labeled ssDNA oligomers. Studies with unmodified ssDNA oligomers were accomplished using the macromolecular competition titration method. Analyses of RepA helicase interactions with a series of the ssDNA provide direct evidence that the total site-size of the RepA hexamer-ssDNA complex is 19 +/- 1 nucleotide residues. The total ssDNA-binding site of the hexamer has a heterogeneous structure. Part of the total binding site constitutes the proper ssDNA-binding site of the enzyme, an area that possesses strong ssDNA-binding capability and encompasses only 8 +/- 1 residues of the ssDNA. The statistical effect on the macroscopic binding constant for the proper ssDNA-binding site indicates that it is structurally separated from the remaining part of the total ssDNA-binding site. Engagement in interactions with the ssDNA is accompanied by net ion release. Moreover, the proper ssDNA-binding site shows little base specificity. On the other hand, with long ssDNA oligomers, the entire total ssDNA-binding site of the RepA hexamer engages in interactions with the ssDNA resulting in a dramatic change in the nature of interactions with the nucleic acid. The association includes an uptake of ions by the protein. Moreover, unlike the proper-ssDNA-binding site, the total binding site shows a significant preference for pyrimidine oligomers. In this aspect, the RepA helicase is different from the Escherichia coli DnaB hexamer that shows large preference for purine homo-oligomers. In similar solution conditions, the ssDNA intrinsic affinity of the RepA hexamer is similar to the intrinsic affinity of the DnaB helicase. The RepA helicase binds to ssDNA oligomers that can accept more than one RepA hexamer with significant positive cooperative interactions.

DnaA Protein of Escherichia coli: oligomerization at the E. coli chromosomal origin is required for initiation and involves specific N-terminal amino acids

Iterated DnaA box sequences within the replication origins of bacteria and prokaryotic plasmids are recognized by the replication initiator, DnaA protein. At the E. coli chromosomal origin, oriC, DnaA is speculated to oligomerize to initiate DNA replication. We developed an assay of oligomer formation at oriC that relies on complementation between two dnaA alleles that are inactive by themselves. One allele is dnaA46; its inactivity at the non-permissive temperature is due to a specific defect in ATP binding. The second allele, T435K, does not support DNA replication because of its inability to bind to DnaA box sequences within oriC. We show that the T435K allele can complement the dnaA46(Ts) allele. The results support a model of oligomer formation in which DnaA box sequences of oriC are bound by DnaA46 to which T435K then binds to form an active complex. Relying on this assay, leucine 5, tryptophan 6 and cysteine 9 in a predicted alpha helix were identified that, when altered, interfere with oligomer formation. Glutamine 8 is additionally needed for oligomer formation on an oriC-containing plasmid, suggesting that the structure of the DnaA-oriC complex at the chromosomal oriC locus is similar but not identical to that assembled on a plasmid. Other evidence suggests that proline 28 of DnaA is involved in the recruitment of DnaB to oriC. These results provide direct evidence that DnaA oligomerization at oriC is required for initiation to occur.

Interactions of the Escherichia coli DnaB helicase hexamer with the replication factor the DnaC protein. Effect of nucleotide cofactors and the ssDNA on protein-protein interactions and the topology of the complex

Quantitative studies of interactions between the Escherichia coli replication factor DnaC protein and the DnaB helicase have been performed using sedimentation velocity and fluorescence energy transfer techniques. The applied novel analysis of the sedimentation data allows us to construct thermodynamic rigorous binding isotherms without any assumption as to the relationship between the observed molecular property of the complexes formed, the average sedimentation coefficient, or the degree of binding. Experiments have been performed with the fluorescein-modified DnaB helicase, which allows an exclusive monitoring of the DnaB-DnaC complex formation. The DnaC binding to the unmodified helicase has been characterized in competition experiments. The data establish that, in the presence of the ATP analog AMP-PNP, or ADP, a maximum of six DnaC monomers bind cooperatively to the DnaB hexamer. The positive cooperative interactions are limited to the two neighboring DnaC molecules. Analyses using a statistical thermodynamic hexagon model indicate that, under the solution conditions examined, the affinity is characterized by the intrinsic binding constant K=1.4(+/-0.5)x10(5)M(-1) and cooperativity parameter sigma=21+/-5. These data suggest strongly that the DnaC-DnaB complex exists in vivo as a mixture of complexes with a different number of bound DnaC molecules, although the complex with six DnaC molecules bound dominates the distribution. The DnaC nucleotide-binding site is not involved in the stabilization of the complex. Moreover, the hydrolysis of NTP bound to the helicase or the DnaC is not required for the release of the DnaC protein from the complex. The single-stranded DNA (ssDNA) bound to the helicase does not affect the DnaC protein binding. However, in the presence of the DNA, there is a significant difference in the energetics and structure of the ternary complex, DnaC-DnaB-ssDNA, formed in the presence of AMP-PNP as compared to ADP. The topology of the ternary complex DnaC-DnaB-ssDNA has been determined using the fluorescence energy transfer method. In solution, the DnaC protein-binding site is located on the large 33 kDa domain of the DnaB helicase. The significance of the results in the functioning of the DnaB helicase-DnaC protein complex is discussed.

Expanding the physiological role of the hexameric DnaB helicase

The hexameric DnaB protein is the Escherichia coli primary replicative helicase. However, recent studies indicate that this enzyme is capable of driving branch migration of a Holliday junction, acting more like an ATP-driven pump than a helicase. This offers an attractive possibility that the protein is directly involved in DNA recombination in vivo. Thus, the physiological role of the DnaB protein in DNA metabolism, and its modes of action, might be more complex than previously thought.

Self-association equilibria of Escherichia coli UvrD helicase studied by analytical ultracentrifugation

The Escherichia coli UvrD protein (helicase II) is an SF1 superfamily helicase required for methyl-directed mismatch repair and nucleotide excision repair of DNA. We have characterized quantitatively the self-assembly equilibria of the UvrD protein as a function of [NaCl], [glycerol], and temperature (5-35 degrees C; pH 8.3) using analytical sedimentation velocity and equilibrium techniques, and find that UvrD self-associates into dimeric and tetrameric species over a range of solution conditions (t</=25 degrees C). Increasing [NaCl] from 20mM to 200 mM decreases the dimerization equilibrium constant (L(20)) from 2.33(+/-0.30) microM(-1) to 0.297(+/-0.006) microM(-1) (pH 8.3, 20% (v/v) glycerol, 25 degrees C). The overall tetramerization equilibrium constant (L(40)) is 5.11(+/-0.80) microM(-3) at 20mM NaCl, but decreases so that it is not measurable at 200 mM NaCl. At 500 mM NaCl, only UvrD monomers are detectable. Increasing [glycerol] over the range from 20% to 40% (v/v) decreases both L(20) and L(40). We find no evidence for hexamer formation, although a species consistent in size with an octamer is detected at 35 degrees C. Inclusion of either ADP or ATPgammaS does not affect either L(20) or L(40) significantly, and does not induce the formation of additional assembly states. We also investigated the stoichiometry of UvrD binding to a 3'-(dT)(20)-18 bp DNA substrate by sedimentation equilibrium. At saturating concentrations of UvrD, three UvrD monomers can bind to the DNA substrate, although only two UvrD monomers are required to form a processive helicase complex. When the total DNA substrate concentration is about twofold greater than the total UvrD concentration, the vast majority of the DNA is bound by a single UvrD monomer.

Kinetic pathway of dTTP hydrolysis by hexameric T7 helicase-primase in the absence of DNA

Bacteriophage T7 gp4A' protein is a hexameric helicase-primase protein that separates the strands of a duplex DNA in a reaction coupled to dTTP hydrolysis. Here we reexamine in more detail the kinetic mechanism of dTTP hydrolysis by a preassembled T7 helicase hexamer in the absence of DNA. Pre-steady state dTTP hydrolysis kinetics showed a distinct burst whose amplitude indicated that a preformed hexamer of T7 helicase hydrolyzes on an average one dTTP per hexamer. The pre-steady state chase-time experiments provided evidence for sequential hydrolysis of two dTTPs. The medium [(18)O]P(i) exchange experiments failed to detect dTTP synthesis, indicating that the less than six-site hydrolysis observed is not due to reversible dTTP hydrolysis on the helicase active site. The P(i)-release rate was measured directly using a stopped-flow fluorescence assay, and it was found that the rate of dTTP hydrolysis on the helicase active site is eight times faster than the P(i)-release rate, which in turn is three times faster than the dTDP release rate. Thus, the rate-limiting step in the pathway of helicase-catalyzed deoxythymidine triphosphatase (dTTPase) reaction is the release of dTDP. Chase-time dTTPase kinetics in the steady state phase provided evidence for two to three slowly hydrolyzing dTTPase sites on the hexamer. The results of this study are therefore consistent with those reported earlier (Hingorani, M. M., Washington, M. T., Moore, K. C., and Patel, S. S. (1997) Proc. Natl. Acad. Sci. U.S.A. 94, 5012-5017), and they support a model of dTTP hydrolysis by T7 helicase hexamer that is similar to the binding change mechanism of F(1)-ATPase with dTTP hydrolysis occurring sequentially at the catalytic sites.

Roles of Mcm7 and Mcm4 subunits in the DNA helicase activity of the mouse Mcm4/6/7 complex

Mcm, which is composed of six structurally related subunits (Mcm2-7), is essential for eukaryotic DNA replication. A subassembly of Mcm, the Mcm4/6/7 double-trimeric complex, possesses DNA helicase activity, and it has been proposed that Mcm may function as a replicative helicase at replication forks. We show here that conserved ATPase motifs of Mcm7 are essential for ATPase and DNA helicase activities of the Mcm4/6/7 complex. Because uncomplexed Mcm7 displayed neither ATPase nor DNA helicase activity, Mcm7 contributes to the DNA helicase activity of the Mcm complex through interaction with other subunits. In contrast, the Mcm4/6/7 complex containing a zinc finger mutant of Mcm4 with partially impaired DNA binding activity exhibited elevated DNA helicase activity. The Mcm4/6/7 complex containing this Mcm4 mutant tended to dissociate into trimeric complexes, suggesting that the zinc finger of Mcm4 is involved in subunit interactions of trimers. The Mcm4 mutants lacking the N-terminal 35 or 112 amino acids could form hexameric Mcm4/6/7 complexes, but displayed very little DNA helicase activity. In conjunction with the previously reported essential role of Mcm6 in ATP binding (You, Z., Komamura, Y., and Ishimi, Y. (1999) Mol. Cell. Biol. 19, 8003-8015), our data indicate distinct roles of Mcm4, Mcm6, and Mcm7 subunits in activation of the DNA helicase activity of the Mcm4/6/7 complex.

Escherichia coli DnaA protein loads a single DnaB helicase at a DnaA box hairpin

The molecular engine that drives bidirectional replication fork movement from the Escherichia coli replication origin (oriC) is the replicative helicase, DnaB. At oriC, two and only two helicase molecules are loaded, one for each replication fork. DnaA participates in helicase loading; DnaC is also involved, because it must be in a complex with DnaB for delivery of the helicase. Since DnaA induces a local unwinding of oriC, one model is that the limited availability of single-stranded DNA at oriC restricts the number of DnaB molecules that can bind. In this report, we determined that one DnaB helicase or one DnaB-DnaC complex is bound to a single-stranded DNA in a biologically relevant DNA replication system. These results indicate that the availability of single-stranded DNA is not a limiting factor and support a model in which the site of entry for DnaB is altered so that it cannot be reused. We also show that 2-4 DnaA monomers are bound on the single-stranded DNA at a specific site that carries a DnaA box sequence in a hairpin structure.

Flexibility of the rings: structural asymmetry in the DnaB hexameric helicase

DnaB is the primary replicative helicase in Escherichia coli and the hexameric DnaB ring has previously been shown to exist in two states in the presence of nucleotides. In one, all subunits are equivalent, while in the other, there are two different subunit conformations resulting in a trimer of dimers. Under all conditions that we have used for electron microscopy, including the absence of nucleotide, some rings exist as trimers of dimers, showing that the symmetry of the DnaB hexamer can be broken prior to nucleotide binding. Three-dimensional reconstructions reveal that the N-terminal domain of DnaB makes two very different contacts with neighboring subunits in the trimer of dimers, but does not form a predicted dimer with a neighboring N-terminal domain. Within the trimer of dimers, the helicase domain exists in two alternate conformations, each of which can form symmetrical hexamers depending upon the nucleotide cofactor used. These results provide new information about the modular architecture and domain dynamics of helicases, and suggest, by comparison with the hexameric bacteriophage T7 gp4 and SV40 large T-antigen helicases, that a great structural and mechanistic diversity may exist among the hexameric helicases.

Replisome-mediated DNA replication

The elaborate process of genomic replication requires a large collection of proteins properly assembled at a DNA replication fork. Several decades of research on the bacterium Escherichia coli and its bacteriophages T4 and T7 have defined the roles of many proteins central to DNA replication. These three different prokaryotic replication systems use the same fundamental components for synthesis at a moving DNA replication fork even though the number and nature of some individual proteins are different and many lack extensive sequence homology. The components of the replication complex can be grouped into functional categories as follows: DNA polymerase, helix destabilizing protein, polymerase accessory factors, and primosome (DNA helicase and DNA primase activities). The replication of DNA derives from a multistep enzymatic pathway that features the assembly of accessory factors and polymerases into a functional holoenzyme; the separation of the double-stranded template DNA by helicase activity and its coupling to the primase synthesis of RNA primers to initiate Okazaki fragment synthesis; and the continuous and discontinuous synthesis of the leading and lagging daughter strands by the polymerases. This review summarizes and compares and contrasts for these three systems the types, timing, and mechanism of reactions and of protein-protein interactions required to initiate, control, and coordinate the synthesis of the leading and lagging strands at a DNA replication fork and comments on their generality.

Energetics and specificity of Rat DNA polymerase beta interactions with template-primer and gapped DNA substrates

Interactions between rat polymerase beta (pol beta) and the template-primer, as well as gapped DNAs, were studied using the quantitative fluorescence titration technique. Stoichiometries of rat pol beta complexes with DNA substrates are much higher than stoichiometries predicted by the structures of co-crystals. The data can be understood in the context of the two single-stranded (ss)DNA-binding modes of the enzyme, the (pol beta)(16) and (pol beta)(5) binding modes, which differ by the number of nucleotides occluded by the protein. The 8-kDa domain of the enzyme engages the double-stranded (ds)DNA downstream from the primer, while the 31-kDa domain has similar affinity for the ss-ds DNA junction and the dsDNA. The affinity of rat pol beta for the gapped DNA is not affected by the size of the gap. The results indicate a plausible model for recognition of the gapped DNA by rat pol beta. The enzyme binds the ss-ds DNA junction of the gap using the 31-kDa domain. This binding induces an allosteric transition, resulting in the association of the 8-kDa domain with the dsDNA, leading to an amplification of the affinity for the gap. The 5' terminal phosphate, downstream from the primer, has little effect on the affinity, but affects the ssDNA conformation of the gap.

Structure and function of hexameric helicases

Helicases are motor proteins that couple the hydrolysis of nucleoside triphosphate (NTPase) to nucleic acid unwinding. The hexameric helicases have a characteristic ring-shaped structure, and all, except the eukaryotic minichromosomal maintenance (MCM) helicase, are homohexamers. Most of the 12 known hexameric helicases play a role in DNA replication, recombination, and transcription. A human genetic disorder, Bloom's syndrome, is associated with a defect in one member of the class of hexameric helicases. Significant progress has been made in understanding the biochemical properties, structures, and interactions of these helicases with DNA and nucleotides. Cooperativity in nucleotide binding was observed in many, and sequential NTPase catalysis has been observed in two proteins, gp4 of bacteriophage T7 and rho of Escherichia coli. The crystal structures of the oligomeric T7 gp4 helicase and the hexamer of RepA helicase show structural features that substantiate the observed cooperativity, and both are consistent with nucleotide binding at the subunit interface. Models are presented that show how sequential NTP hydrolysis can lead to unidirectional and processive translocation. Possible unwinding mechanisms based on the DNA exclusion model are proposed here, termed the wedge, torsional, and helix-destabilizing models.

tau binds and organizes Escherichia coli replication proteins through distinct domains. Domain IV, located within the unique C terminus of tau, binds the replication fork, helicase, DnaB

Interaction between the tau subunit of the DNA polymerase III holoenzyme and the DnaB helicase is critical for coupling the replicase and the primosomal apparatus at the replication fork (Kim, S., Dallmann, H. G., McHenry, C. S., and Marians, K. J. (1996) Cell 84, 643-650). In the preceding manuscript, we reported the identification of five putative structural domains within the tau subunit (Gao, D., and McHenry, C. (2000) J. Biol. Chem. 275, 4433-4440). As part of our systematic effort to assign functions to each of these domains, we expressed a series of truncated, biotin-tagged tau fusion proteins and determined their ability to bind DnaB by surface plasmon resonance on streptavidin-coated surfaces. Only tau fusion proteins containing domain IV bound DnaB. The DnaB-binding region was further limited to a highly basic 66-amino acid residue stretch within domain IV. Unlike the binding of immobilized tau(4) to the DnaB hexamer, the binding of monomeric domain IV to DnaB(6) was dependent upon the density of immobilized domain IV, indicating that DnaB(6) is bound by more than one tau protomer. This observation implies that both the leading and lagging strand polymerases are tethered to the DnaB helicase via dimeric tau. These double tethers of the leading and lagging strand polymerases proceeding through the tau-tau link and an additional tau-DnaB link are likely important for the dynamic activities of the replication fork.

Unwinding of a DNA triple helix by the Werner and Bloom syndrome helicases

Bloom syndrome and Werner syndrome are genome instability disorders, which result from mutations in two different genes encoding helicases. Both enzymes are members of the RecQ family of helicases, have a 3' --> 5' polarity, and require a 3' single strand tail. In addition to their activity in unwinding duplex substrates, recent studies show that the two enzymes are able to unwind G2 and G4 tetraplexes, prompting speculation that failure to resolve these structures in Bloom syndrome and Werner syndrome cells may contribute to genome instability. The triple helix is another alternate DNA structure that can be formed by sequences that are widely distributed throughout the human genome. Here we show that purified Bloom and Werner helicases can unwind a DNA triple helix. The reactions are dependent on nucleoside triphosphate hydrolysis and require a free 3' tail attached to the third strand. The two enzymes unwound triplexes without requirement for a duplex extension that would form a fork at the junction of the tail and the triplex. In contrast, a duplex formed by the third strand and a complement to the triplex region was a poor substrate for both enzymes. However, the same duplex was readily unwound when a noncomplementary 5' tail was added to form a forked structure. It seems likely that structural features of the triplex mimic those of a fork and thus support efficient unwinding by the two helicases.

Mutations that affect dimer formation and helicase activity of the hepatitis C virus helicase

Interaction between viral proteins is necessary for viral replication and viral particle assembly. We used the yeast two-hybrid assay to identify interactions among all the mature proteins of the hepatitis C virus. The interaction between NS3 and NS3 was one of the strongest viral protein-protein interactions detected. The minimal region required for this interaction was mapped to a specific subdomain of 174 amino acids in the N terminus of the helicase region. Random mutations in the minimal region were generated by PCR, and mutants that failed to interact with a wild-type minimal fragment were isolated using the yeast two-hybrid assay as a screen. Three of these mutations resulted in a reduction or a loss of interaction between helicases. Analytical gel filtration showed that in the presence of an oligonucleotide, wild-type helicases form dimers whereas the mutants remain mostly monomeric. All three mutants were partially or almost inactive when assayed for helicase activity in vitro. Mixing a mutant helicase (Y267S) with wild-type helicase did not dramatically affect helicase activity. These data indicate that dimerization of the helicase is important for helicase activity. The mutations that reduce self-association of the helicase may define the key residues involved in NS3-NS3 dimerization.

Multiple-step kinetic mechanism of DNA-independent ATP binding and hydrolysis by Escherichia coli replicative helicase DnaB protein: quantitative analysis using the rapid quench-flow method

The kinetic mechanism of DNA-independent binding and hydrolysis of ATP by the E. coli replicative helicase DnaB protein has been quantitatively examined using the rapid quench-flow technique. Single-turnover studies of ATP hydrolysis, in a non-interacting active site of the helicase, indicate that bimolecular association of ATP with the site is followed by the reversible hydrolysis of nucleotide triphosphate and subsequent conformational transition of the enzyme-product complex. The simplest mechanism, which describes the data, is a three-step sequential process defined by:¿eqalign¿¿¿rm Helicase+ATP¿&¿mathop¿¿rightleftharpoons¿ ¿k_1¿_¿k_¿-1¿¿¿¿rm (H-ATP)¿¿mathop¿¿rightleftharpoons¿ ¿k_2¿_¿k_¿-2¿¿¿¿rm (H-ADP¿cdot Pi)¿¿cr &¿mathop¿¿rightleftharpoons¿ ¿k_3¿_¿k_¿-3¿¿¿¿rm (H-ADP¿cdot Pi)¿ *¿The sequential character of the mechanism excludes conformational transitions of the DnaB helicase prior to ATP binding. Analysis of relaxation times and amplitudes of the reaction allowed us to estimate all rate and equilibrium constants of partial steps of the proposed mechanism. The intrinsic binding constant for the formation of the (H-ATP) complex is K(ATP)=(1.3+/-0.5)x10(5) M(-1). The analysis of the data indicates that a part of the ATP binding energy originates from induced structural changes of the DnaB protein-ATP complex prior to ATP hydrolysis. The equilibrium constant of the chemical interconversion is K(H)=k(2)/k(-2) approximately 2 while the subsequent conformational transition is characterized by K(3)=k(3)/k(-3) approximately 30. The low value of K(H) and the presence of the subsequent energetically favorable conformational step(s) strongly suggest that free energy is released from the enzyme-product complex in the conformational transitions following the chemical step and before the product release.The combined application of single and multiple-turnover approaches show that all six nucleotide-binding sites of the DnaB hexamer are active ATPase sites. Binding of ATP to the DnaB hexamer is characterized by the negative cooperativity parameter sigma=0.25(+/-0.1). The negative cooperative interactions predominantly affect the ground state of the enzyme-ATP complex. The significance of these results for the mechanism of the free energy transduction of the DnaB helicase is discussed.

pH-controlled quaternary states of hexameric DnaB helicase

DnaB is the major helicase in the Escherichia coli replisome. It is a homohexameric enzyme that interacts with many other replisomal proteins and cofactors. It is usually loaded onto a single strand of DNA at origins of replication from its complex with its loading partner DnaC, then translocates in the 5' to 3' direction, unwinding duplex DNA in an NTP-driven process. Quaternary polymorphism has been described for the DnaB oligomer, a feature it has in common with some other hexameric helicases. In the present work, electron microscopy and in- depth rotational analysis studies of negatively stained specimens has allowed the establishment of conditions that govern the transition between the two different rotational symmetry states (C(3) and C(6)) of DnaB. It is shown: (a) that the pH value of the sample buffer, within the physiological range, dictates the quaternary organisation of the DnaB oligomer; (b) that the pH-induced transition is fully reversible; (c) that the type of adenine nucleotide complexed to DnaB, whether hydrolysable or not, does not affect its quaternary architecture; (d) that the DnaB.DnaC complex exists only as particles with C(3) symmetry; and (e) that DnaC interacts only with DnaB particles that have C(3) symmetry. Structural consequences of this quaternary polymorphism, as well as its functional implications for helicase activity, are discussed.

Escherichia coli replicative helicase PriA protein-single-stranded DNA complex. Stoichiometries, free energy of binding, and cooperativities

Analyses of interactions of the Escherichia coli replicative helicase, PriA protein, with a single-stranded (ss) DNA have been performed, using the quantitative fluorescence titration technique. The stoichiometry of the PriA helicase.ssDNA complex has been examined in binding experiments with a series of ssDNA oligomers. The total site-size of the PriA.ssDNA complex, i.e. the maximum number of nucleotide residues occluded by the PriA helicase in the complex, is 20 +/- 3 residues per protein monomer. However, the protein can efficiently form a complex with a minimum of 8 nucleotides. Thus, the enzyme has a strong ssDNA-binding site that engages in direct interactions with a significantly smaller number of nucleotides than the total site-size. The ssDNA-binding site is located in the center of the enzyme molecule, with the protein matrix protruding over a distance of approximately 6 nucleotides on both sides of the binding site. The analysis of the binding of two PriA molecules to long oligomers was performed using statistical thermodynamic models that take into account the overlap of potential binding sites, cooperative interactions, and the protein.ssDNA complexes with different stoichiometries. The intrinsic affinity depends little upon the length of the ssDNA. Moreover, the binding is accompanied by weak cooperative interactions.

Crystal structure of T7 gene 4 ring helicase indicates a mechanism for sequential hydrolysis of nucleotides

We have determined the crystal structure of an active, hexameric fragment of the gene 4 helicase from bacteriophage T7. The structure reveals how subunit contacts stabilize the hexamer. Deviation from expected six-fold symmetry of the hexamer indicates that the structure is of an intermediate on the catalytic pathway. The structural consequences of the asymmetry suggest a "binding change" mechanism to explain how cooperative binding and hydrolysis of nucleotides are coupled to conformational changes in the ring that most likely accompany duplex unwinding. The structure of a complex with a nonhydrolyzable ATP analog provides additional evidence for this hypothesis, with only four of the six possible nucleotide binding sites being occupied in this conformation of the hexamer. This model suggests a mechanism for DNA translocation.

Replication-associated activities of purified human papillomavirus type 11 E1 helicase

Replication of human papillomavirus type11 (HPV11) requires both the E1 and the E2 proteins. E1 is structurally and functionally similar to SV40 large T-antigen and is a DNA helicase/NTPase that binds to the origin of replication and initiates viral DNA replication. The biochemical characterization of HPV E1 is incompletely documented in the literature in part because of difficulties in expressing and purifying the protein. Herein, we report a method for the overexpression of full-length, untagged E1 (73.5 kDa) in baculovirus-infected Trichoplusia ni insect cells and the purification to homogeneity using a two-step procedure. The purified protein is a nonspecific NTPase that hydrolyzes ATP, dATP, UTP, or GTP equally well. Point mutations were made in the putative NTPase domain to verify that the activities observed were encoded by E1. Purified mutant D523N had negligible ATPase and helicase activities but retained DNA-binding activity. Sedimentation equilibrium ultracentrifugation and glycerol gradient centrifugation demonstrated that the wild-type protein is primarily a hexamer in its purified form. Secondary structure determination by circular dichroism revealed a large percentage of alpha-helical structure consistent with secondary structure predictions. These data define a fundamental set of biochemical and kinetic parameters for HPV E1 which are a critical prerequisite to future mechanistic studies of the enzyme.

Interactions between DNA helicases and frozen topoisomerase IV-quinolone-DNA ternary complexes

Collisions between replication forks and topoisomerase-drug-DNA ternary complexes result in the inhibition of DNA replication and the conversion of the normally reversible ternary complex to a nonreversible form. Ultimately, this can lead to the double strand break formation and subsequent cell death. To understand the molecular mechanisms of replication fork arrest by the ternary complexes, we have investigated molecular events during collisions between DNA helicases and topoisomerase-DNA complexes. A strand displacement assay was employed to assess the effect of topoisomerase IV (Topo IV)-norfloxacin-DNA ternary complexes on the DnaB, T7 gene 4 protein, SV40 T-antigen, and UvrD DNA helicases. The ternary complexes inhibited the strand displacement activities of these DNA helicases. Unlike replication fork arrest, however, this general inhibition of DNA helicases by Topo IV-norfloxacin-DNA ternary complexes did not require the cleavage and reunion activity of Topo IV. We also examined the reversibility of the ternary complexes after collisions with these DNA helicases. UvrD converted the ternary complex to a nonreversible form, whereas DnaB, T7 gene 4 protein, and SV40 T-antigen did not. These results suggest that the inhibition of DnaB translocation may be sufficient to arrest the replication fork progression but it is not sufficient to generate cytotoxic DNA lesion.

NMR structure of the N-terminal domain of E. coli DnaB helicase: implications for structure rearrangements in the helicase hexamer

BACKGROUND

DnaB is the primary replicative helicase in Escherichia coli. Native DnaB is a hexamer of identical subunits, each consisting of a larger C-terminal domain and a smaller N-terminal domain. Electron-microscopy data show hexamers with C6 or C3 symmetry, indicating large domain movements and reversible pairwise association.

RESULTS

The three-dimensional structure of the N-terminal domain of E. coli DnaB was determined by nuclear magnetic resonance (NMR) spectroscopy. Structural similarity was found with the primary dimerisation domain of a topoisomerase, the gyrase A subunit from E. coli. A monomer-dimer equilibrium was observed for the isolated N-terminal domain of DnaB. A dimer model with C2 symmetry was derived from intermolecular nuclear Overhauser effects, which is consistent with all available NMR data.

CONCLUSIONS

The monomer-dimer equilibrium observed for the N-terminal domain of DnaB is likely to be of functional significance for helicase activity, by participating in the switch between C6 and C3 symmetry of the helicase hexamer.

Escherichia coli DNA helicase II is active as a monomer

Helicases are thought to function as oligomers (generally dimers or hexamers). Here we demonstrate that although Escherichia coli DNA helicase II (UvrD) is capable of dimerization as evidenced by a positive interaction in the yeast two-hybrid system, gel filtration chromatography, and equilibrium sedimentation ultracentrifugation (Kd = 3.4 microM), the protein is active in vivo and in vitro as a monomer. A mutant lacking the C-terminal 40 amino acids (UvrDDelta40C) failed to dimerize and yet was as active as the wild-type protein in ATP hydrolysis and helicase assays. In addition, the uvrDDelta40C allele fully complemented the loss of helicase II in both methyl-directed mismatch repair and excision repair of pyrimidine dimers. Biochemical inhibition experiments using wild-type UvrD and inactive UvrD point mutants provided further evidence for a functional monomer. This investigation provides the first direct demonstration of an active monomeric helicase, and a model for DNA unwinding by a monomer is presented.

The Bacillus stearothermophilus replicative helicase: cloning, overexpression and activity

As part of biochemical and structural studies of the primosome of a gram positive bacterial species, we describe the cloning of the Bacillus stearothermophilus replicative helicase, DnaB. The protein is 45% and 82% identical to the Escherichia coli and B. subtilis replicative helicases, respectively. Recombinant DnaB was purified and shown to be an active helicase.

DnaB from Thermus aquaticus unwinds forked duplex DNA with an asymmetric tail length dependence

DnaB helicase is a ring-shaped hexamer of 300 kDa that is essential for replication of the bacterial chromosome. The dnaB gene from Thermus aquaticus was isolated and cloned, and its gene product was expressed and purified to homogeneity. A helicase assay was developed, and optimal conditions for T. aquaticus DnaB activity were determined using a forked duplex DNA substrate. The activity required a hydrolyzable nucleoside triphosphate and both 5'- and 3'-single-stranded DNA tail regions. Under conditions of single enzymatic turnover, the lengths of the 5'- and 3'-single-stranded regions were varied, and 6-10 nucleotides of the 5'-single-stranded tail and 21-30 nucleotides of the 3'-single-stranded tail markedly stimulated the unwinding rate. These data suggest that DnaB from T. aquaticus interacts with both DNA single-stranded tails during unwinding and that a greater portion of the 3'-tail is in contact with the protein. Two models are consistent with these data. In one model, the 5'-single stranded region passes through the central hole of the DnaB ring, and the 3'-tail makes extensive contact with the outside of the protein. In the other model, the 3'-single-stranded region passes through the DnaB ring, and the outside of the protein contacts the 5'-tail.

Escherichia coli DnaA protein. The N-terminal domain and loading of DnaB helicase at the E. coli chromosomal origin

Initiation of DNA replication at the Escherichia coli chromosomal origin occurs through an ordered series of events that depends first on the binding of DnaA protein, the replication initiator, to DnaA box sequences followed by unwinding of an AT-rich region. A step that follows is the binding of DnaB helicase at oriC so that it is properly positioned at each replication fork. We show that DnaA protein actively mediates the entry of DnaB at oriC. One region (amino acids 111-148) transiently binds to DnaB as determined by surface plasmon resonance. A second functional domain, possibly involving formation of a unique nucleoprotein structure, promotes the stable binding of DnaB during the initiation process and is inactivated in forming an intermediate termed the prepriming complex by removal of the N-terminal 62 residues. Based on similarities in the replication process between prokaryotes and eukaryotes, these results suggest that a similar mechanism may load the eukaryotic replicative helicase.

Transition between different binding modes in rat DNA polymerase beta-ssDNA complexes

Interactions of rat DNA polymerase beta with a single-stranded (ss) DNA have been studied using the quantitative fluorescence titration technique. Examination of the fluorescence changes accompanying the binding, as a function of the thermodynamically rigorous binding density of rat pol beta-ssDNA complexes, reveals the existence of two binding phases. In the first high affinity phase, rat pol beta forms a complex with the ssDNA in which 16 nucleotides are occluded by the enzyme. In the second low affinity phase, a transition to a complex where the polymerase occludes only five nucleotides occurs. Thus, the data show that rat pol beta binds the ssDNA in two binding modes which differ in the number of occluded nucleotides. We designate the first complex as the (pol beta)16 binding mode and the second as the (pol beta)5 binding mode. The formation of the (pol beta)16 and (pol beta)5 modes has been fully confirmed in experiments with short ssDNA oligomers, a 16mer which can form either the (pol beta)16 or the (pol beta)5 mode, and a 10mer which can form only the (pol beta)5 mode. Binding of rat pol beta to the ssDNA has been analyzed using a statistical thermodynamic model which accounts for the existence of the two binding modes, cooperative interactions, and the overlap of potential binding sites. The results indicate that the 8 kDa domain of the enzyme is involved in ssDNA binding in both modes. Binding studies show that an isolated 8 kDa domain has the same intrinsic affinity for the ssDNA as the entire intact enzyme in its (pol beta)5 mode. However, the site size of the 8 kDa domain-ssDNA complex is ten nucleotides, suggesting that the formation of the (pol beta)5 mode is accompanied by a significant conformational transition of the intact protein. A higher intrinsic affinity, a higher net number of ions released, and a lower fluorescence change accompanying the formation of the (pol beta)16 than the (pol beta)5 mode indicate that the 31 kDa catalytic domain of the enzyme interacts with the ssDNA only in the (pol beta)16 mode. The significance of these results for understanding the functioning of rat pol beta in the DNA metabolism is discussed.

Human DNA polymerase beta recognizes single-stranded DNA using two different binding modes

Interactions between the human DNA polymerase beta (pol beta) and a single-stranded (ss) DNA have been studied using the quantitative fluorescence titration technique. Examination of the fluorescence increase of the poly(dA) etheno-derivative (poly(depsilonA)) as a function of the binding density of pol beta-nucleic acid complexes reveals the existence of two binding phases. In the first high affinity phase, pol beta forms a complex with a ssDNA in which 16 nucleotides are occluded by the enzyme. In the second phase, transition to a complex where the polymerase occludes only 5 nucleotides occurs. Thus, human pol beta binds a ssDNA in two binding modes, which differ in the number of occluded nucleotide residues. We designate the first complex as (pol beta)16 and the second as (pol beta)5 binding modes. The analyses of the enzyme binding to ssDNA have been performed using statistical thermodynamic models, which account for the existence of the two binding modes of the enzyme, cooperative interactions, and the overlap of potential binding sites. The importance of the discovery that human pol beta binds a ssDNA, using different binding modes, for the possible mechanistic model of the functioning of human pol beta, is discussed.

Synthetic DNA replication bubbles bound and unwound with twofold symmetry by a simian virus 40 T-antigen double hexamer

Dimerization of simian virus 40 T-antigen hexamers (TAgH) into double hexamers (TAgDH) on model DNA replication forks has been found to greatly stimulate T-antigen DNA helicase activity. To explore the interaction of TAgDH with DNA during unwinding, we examined the binding of TAgDH to synthetic DNA replication bubbles. Tests of replication bubble substrates containing different single-stranded DNA (ssDNA) lengths indicated that efficient formation of a TAgDH requires >/=40 nucleotides (nt) of ssDNA. DNase I probing of a substrate containing a 60-nt ssDNA bubble complexed with a TAgDH revealed that T antigen bound the substrate with twofold symmetry. The strongest protection was observed over the 5' junction on each strand, with 5 bp of duplex DNA and approximately 17 nt of adjacent ssDNA protected from nuclease cleavage. Stimulation of the T-antigen DNA helicase activity by an increase in ATP concentration caused the protection to extend in the 5' direction into the duplex region, while resulting in no significant changes to the 3' edge of strongest protection. Our data indicate that each TAgH encircles one ssDNA strand, with a different strand bound at each junction. The process of DNA unwinding results in each TAgH interacting with a greater length of DNA than was initially bound, suggesting the generation of a more highly processive helicase complex.

Bacteriophage T7 DNA helicase binds dTTP, forms hexamers, and binds DNA in the absence of Mg2+. The presence of dTTP is sufficient for hexamer formation and DNA binding

The role of Mg2+ in dTTP hydrolysis, dTTP binding, hexamer formation, and DNA binding was studied in bacteriophage T7 DNA helicase (4A' protein). The steady state kcat for the dTTPase activity was 200-300-fold lower in the absence of MgCl2, but the Km was only slightly affected. Direct dTTP binding experiments showed that the Kd of dTTP was unaffected, but the stoichiometry of dTTP binding was different in the absence of Mg2+. Two dTTPs were found to bind tightly in the absence of Mg2+ in contrast to three to four in the presence of Mg2+. In the presence of DNA there was little difference in the stoichiometry of dTTP binding to 4A'. These results indicate that Mg2+ is not necessary for dTTP binding, but Mg2+ is required for optimal hydrolysis of dTTP. Gel filtration of 4A' in the presence of dTTP without Mg2+ showed that Mg2+ was not necessary, and dTTP was sufficient for hexamer formation. The hexamers formed in the presence of dTTP without Mg2+ were capable of binding single-stranded DNA. However, the 4A' hexamers formed in the presence of dTDP with or without Mg2+ did not bind DNA, indicating that hexamer formation itself is not sufficient for DNA binding. The hexamers need to be in the correct conformation, in this case in the dTTP-bound state, to interact with the DNA. Thus, the gamma-phosphate of dTTP plays an important role in causing a conformational change in the protein that leads to stable interactions of 4A' with the DNA.

The papillomavirus E1 protein forms a DNA-dependent hexameric complex with ATPase and DNA helicase activities

The E1 protein from bovine papillomavirus has site-specific DNA binding activity, DNA helicase activity, and DNA-dependent ATPase activity consistent with the properties of an initiator protein. Here we have identified and characterized a novel oligomeric form of E1 that is associated with the ATPase and DNA helicase activities and whose formation is strongly stimulated by single-stranded DNA. This oligomeric form corresponds to a hexamer of E1.

Does single-stranded DNA pass through the inner channel of the protein hexamer in the complex with the Escherichia coli DnaB Helicase? Fluorescence energy transfer studies

The structure of the complex of the Escherichia coli primary replicative helicase DnaB protein with single-stranded (ss) DNA and replication fork substrates has been examined using the fluorescence energy transfer method. In these experiments, we used the DnaB protein variant, R14C, which has arginine 14 replaced by cysteine in the small 12-kDa domain of the protein using site-directed mutagenesis. The cysteine residues have been modified with a fluorescent marker which serves as a donor or an acceptor to another fluorescence label placed in different locations on the DNA substrates. Using the multiple fluorescence donor-acceptor approach, we provide evidence that, in the complex with the enzyme, ssDNA passes through the inner channel of the DnaB hexamer. This is the first evidence of the existence of such a structure of a hexameric helicase-ssDNA complex in solution. In the stationary complex with the 5' arm of the replication fork, without ATP hydrolysis, the distance between the 5' end of the arm and the 12-kDa domains of the hexamer (R = 47 A) is the same as in the complex with the isolated ssDNA oligomer (R = 47 A) having the same length as the arm of the fork. These data indicate that both ssDNA and the 5' arm of the fork bind in the same manner to the DNA binding site. Moreover, in the complex with the helicase, the length of the ssDNA is similar to the length of the ssDNA strand in the double-stranded DNA conformation. In the stationary complex, the helicase does not invade the duplex part of the fork beyond the first 2-3 base pairs. This result corroborates the quantitative thermodynamic data which showed that the duplex part of the fork does not contribute to the free energy of binding of the enzyme to the fork. Implications of these results for the mechanism of a hexameric helicase binding to DNA are discussed.

Three-dimensional reconstructions from cryoelectron microscopy images reveal an intimate complex between helicase DnaB and its loading partner DnaC

BACKGROUND

DNA helicases play a fundamental role in all aspects of nucleic acid metabolism and defects in these enzymes have been implicated in a number of inherited human disorders. DnaB is the major replicative DNA helicase in Escherichia coli and has been used as a model system for studying the structure and function of hexameric helicases. The native protein is a hexamer of identical subunits, which in solution forms a complex with six molecules of the loading protein DnaC. DnaB is delivered from this complex onto the DNA template, with the subsequent release of DnaC. We report here the structures of the DnaB helicase hexamer and its complex with DnaC under a defined set of experimental conditions, as determined by three-dimensional cryoelectron microscopy. It was hoped that the structures would provide insight into the mechanisms of helicase activity.

RESULTS

The DnaB structure reveals that six DnaB monomers assemble as three asymmetric dimers to form a polar, ring-like hexamer. The hexamer has two faces, one displaying threefold and the other sixfold symmetry. The six DnaC protomers bind tightly to the sixfold face of the DnaB hexamer. This is the first report of a three-dimensional structure of a helicase obtained using cryoelectron microscopy, and the first report of the structure of a helicase in complex with a loading protein.

CONCLUSIONS

The structures of the DnaB helicase and its complex with DnaC reveal some interesting structural features relevant to helicase function and to the assembly of the two-protein complex. The results presented here provide a basis for a more complete understanding of the structure and function of these important proteins.

Functional and structural heterogeneity of the DNA binding site of the Escherichia coli primary replicative helicase DnaB protein

The structure-function relationship within the DNA binding site of the Escherichia coli replicative helicase DnaB protein was studied using nuclease digestion, quantitative fluorescence titration, centrifugation, and fluorescence energy transfer techniques. Nuclease digestion of the enzyme-single-stranded DNA (ssDNA) complexes reveals large structural heterogeneity within the binding site. The total site is built of two subsites differing in structure and affinity, although both occlude approximately 10 nucleotides. ssDNA affinity for the strong subsite is approximately 3 orders of magnitude higher than that for the weak subsite. Fluorescence energy transfer experiments provide direct proof that the DnaB hexamer binds ssDNA in a single orientation, with respect to the polarity of the sugar-phosphate backbone. This is the first evidence of directional binding to ssDNA of a hexameric helicase in solution. The strong binding subsite is close to the small 12-kDa domains of the DnaB hexamer and occludes the 5'-end of the ssDNA. The strict orientation of the helicase on ssDNA indicates that, when the enzyme approaches the replication fork, it faces double-stranded DNA with its weak subsite. The data indicate that the different binding subsites are located sequentially, with the weak binding subsite constituting the entry site for double-stranded DNA of the replication fork.

Processing of recombination intermediates by the RuvABC proteins

The RuvA, RuvB, and RuvC proteins in Escherichia coli play important roles in the late stages of homologous genetic recombination and the recombinational repair of damaged DNA. Two proteins, RuvA and RuvB, form a complex that promotes ATP-dependent branch migration of Holliday junctions, a process that is important for the formation of heteroduplex DNA. Individual roles for each protein have been defined, with RuvA acting as a specificity factor that targets RuvB, the branch migration motor to the junction. Structural studies indicate that two RuvA tetramers sandwich the junction and hold it in an unfolded square-planar configuration. Hexameric rings of RuvB face each other across the junction and promote a novel dual helicase action that "pumps" DNA through the RuvAB complex, using the free energy provided by ATP hydrolysis. The third protein, RuvC endonuclease, resolves the Holliday junction by introducing nicks into two DNA strands. Genetic and biochemical studies indicate that branch migration and resolution are coupled by direct interactions between the three proteins, possibly by the formation of a RuvABC complex.

Asymmetric interactions of hexameric bacteriophage T7 DNA helicase with the 5'- and 3'-tails of the forked DNA substrate

Bacteriophage T7 DNA helicase requires two noncomplementary single-stranded DNA (ssDNA) tails next to a double-stranded DNA (dsDNA) region to initiate DNA unwinding. The interactions of the helicase with the DNA were investigated using a series of forked DNAs. Our results show that the helicase interacts asymmetrically with the two tails of the forked DNA. When the helicase was preassembled on the forked DNA before the start of unwinding, a DNA with 15-nucleotide (nt) 3'-tail and 35-nt 5'-tail was unwound with optimal rates close to 60 base pairs/s at 18 degrees C. When the helicase was not preassembled on the DNA, a >65-nt long 5'-tail was required for maximal unwinding rates of 12 base pairs/s. We show that the helicase interacts specifically with the ssDNA region and maintains contact with both ssDNA strands during DNA unwinding, since conversion of the two ssDNA tails to dsDNA structures greatly inhibited unwinding, and the helicase was unable to unwind past a nick in the dsDNA region. These studies have provided new insights into the mechanism of DNA unwinding. We propose an exclusion model of DNA unwinding in which T7 helicase hexamer interacts mainly with the ssDNA strands during DNA unwinding, encircling the 5'-strand and excluding the 3'-strand from the hole.

The RepA protein of plasmid RSF1010 is a replicative DNA helicase

The RepA protein of the mobilizable broad host range plasmid RSF1010 has a key function in its replication. RepA is one of the smallest known helicases. The protein forms a homohexamer of 29,896-Da subunits. A variety of methods were used to analyze the quaternary structure of RepA. Gel filtration and cross-linking experiments demonstrated the hexameric structure, which was confirmed by electron microscopy and image reconstruction. These results agree with recent data obtained from RepA crystals diffracting at 3.5-A resolution (Röleke, D., Hoier, H., Bartsch, C., Umbach, P., Scherzinger, E., Lurz, R., and Saenger, W. (1997) Acta Crystallogr. Sec. D 53, 213-216). The RepA helicase has 5' --> 3' polarity. As do most true replicative helicases, RepA prefers a tailed substrate with an unpaired 3'-tail mimicking a replication fork. Optimal unwinding activity was achieved at the remarkably low pH of 5.5. In the presence of Mg2+ (Mn2+) ions, the RepA activity is fueled by ATP, dATP, GTP, and dGTP and less efficiently by CTP and dCTP. UTP and dTTP are poor effectors. Nonhydrolyzable ATP analogues, ADP, and pyrophosphate inhibit the helicase activity, whereas inorganic phosphate does not. The presence of Escherichia coli single-stranded DNA-binding protein stimulates unwinding at physiological pH 2-3-fold, whereas the RSF1010 replicon-specific primase, RepB' protein, has no effect, either in the presence or in the absence of single-stranded DNA-binding protein.

Six molecules of SV40 large T antigen assemble in a propeller-shaped particle around a channel

The large T antigen of simian virus 40 (SV40) is a multifunctional regulatory protein, responsible for both the control of viral infection and the required alterations of cellular processes. T antigen is the only viral protein required for viral DNA replication. It binds specifically to the viral origin and as a helicase unwinds the SV40 DNA bidirectionally. The functional complex is a double hexameric oligomer. In the absence of DNA, but in the presence of ATP or a non-hydrolyzable analog, T antigen assembles into hexamers, which are active as a helicase when a partially single-stranded (3') entry site exists on the substrate. We have used negative staining electron microscopy, single particle image processing and three-dimensional reconstruction with a new algebraic reconstruction techniques (ART) algorithm to study the structure of these hexameric particles in the presence of different nucleotide cofactors (ATP, ADP, and the non-hydrolyzable analogs ATPgammaS and AMP-PNP). In every case a strong 6-fold structure was found, with the six density maxima arranged in a ring-like particle around a channel, and a well-defined vorticity. Because these structural features have recently been found in other prokaryotic helicases, they seem to be strongly related to the activity of the protein, which suggests a general functional model conserved through evolution.

Quantitative analysis of ligand-macromolecule interactions using differential dynamic quenching of the ligand fluorescence to monitor the binding

Quantitative analyses of the thermodynamics and kinetics of ligand-macromolecule interactions in biological systems rely predominately on monitoring changes in the spectroscopic properties of the ligand or macromolecule, particularly fluorescence changes, which accompany the formation of the studied complexes. However, in many instances the interactions do not affect the fluorescence properties of interacting species and do not provide a resolution high enough to perform quantitative and rigorous measurements of the thermodynamic and/or kinetic parameters. In this communication, we describe the theoretical and experimental aspects of a method of studying complex, multiple ligand-macromolecule interactions by the fluorescence titration technique, when the intrinsic fluorescence changes accompanying binding do not provide a resolution necessary to perform quantitative analyses. The method is based on the fact that a fluorescent ligand, or binding sites of the macromolecule, can have different accessibility to the collisional (dynamic) quencher, when involved in the complex, rather than in the free, unbound state. The presence of an external dynamic quencher in solution, i.e., the presence of an extra collisional quenching process, transforms the fluorescence of the ligand or macromolecule, intrinsically independent of the complex formation, into a property which is dramatically different in the free state than in the bound state of the fluorophore. The approach is applicable to any model of noncooperative or cooperative ligand binding to a macromolecule and allows for the optimization of the resolution of the binding or kinetic studies for a given ligand-macromolecule system. The application of the method is illustrated by applying it to the study of the binding of the fluorescent derivative of a nucleotide cofactor, epsilon ADP, to the six interacting sites of the E. coli primary replicative helicase DnaB protein hexamer.

Precise limits of the N-terminal domain of DnaB helicase determined by NMR spectroscopy

Two separate N-terminal fragments of the 470-amino-acid Escherichia coli DnaB helicase, comprising residues 1-142 and 1-161, were expressed in E. coli. The proteins were extracted in a soluble fraction, purified, and characterised physically. In contrast to the full-length protein, which is hexameric, both fragments exist as monomers in solution, as demonstrated by sedimentation equilibrium measurements. CD spectroscopy was used to confirm that the 161-residue fragment is highly structured (mostly alpha-helical) and undergoes reversible thermal denaturation. The structurally well-defined core of the N-terminal domain of the DnaB helicase is composed of residues 24 to 136, as determined by assignment of resonances from flexible residues in NMR spectra. The 1H NMR signals of the flexible residues are located at random coil chemical shifts, and their linewidths are significantly narrower than those of the structured core, indicating complete disorder and increased mobility on the nanosecond time scale. The results support the idea of a flexible hinge region between the N- and C-terminal domains of the native hexameric DnaB protein.

Defect in general priming conferred by linker region mutants of Escherichia coli dnaB

The dnaB gene of Escherichia coli encodes a bifunctional primase accessory protein/helicase necessary for chromosomal replication. Monomers of DnaB comprise two trypsin-resistant domains connected by a 45-amino-acid linker. To investigate the role of the linker in the structure and function of DnaB, we have purified and characterized three DnaB mutant proteins having single amino acid substitutions in the linker. We find that the mutant proteins retain the two-domain structure and assemble into hexamers that may be less stable than hexamers formed by wild-type DnaB. These mutant hexamers have hydrodynamic properties slightly different from those of the wild type, suggestive of a more open structure. The mutant proteins had reduced or absent ability to stimulate primase and also exhibited slight alterations in ATPase activity compared with the wild type. We conclude that the linker region promotes primase-DnaB interaction, but this effect may be indirect. We propose a model involving repositioning of N-terminal domains to explain the properties of the mutant proteins.