Constitution of the twin polymerase of DNA polymerase III holoenzyme

Evidence that DNA polymerase delta isolated by immunoaffinity chromatography exhibits high-molecular weight characteristics and is associated with the KIAA0039 protein and RPA

DNA polymerase delta, the key enzyme for eukaryotic chromosomal replication, has been well characterized as consisting of a core enzyme of a 125 kDa catalytic subunit and a smaller 50 kDa subunit. However, less is known about the other proteins that may comprise additional subunits or participate in the macromolecular protein complex that is involved in chromosomal DNA replication. In this study, the properties of calf thymus pol delta preparations isolated by immunoaffinity chromatography were investigated. It is demonstrated for the first time using highly purified preparations that the pol delta heterodimer is associated with other polypeptides in high-molecular weight species that range from 260000 to >500000 in size, as determined by FPLC gel filtration. These preparations are associated with polypeptides of ca. 68-70, 34, 32, and 25 kDa. Similar findings were revealed with glycerol gradient ultracentrifugation. The p68 polypeptide was shown to be a PCNA binding protein by overlay methods with biotinylated PCNA. Protein sequencing of the p68, p34, and p25 polypeptide bands revealed sequences that correspond to the hypothetical protein KIAA0039. KIAA0039 displays a small but significant degree of homology to Schizosaccharomyces pombe Cdc27, which, like Saccharomyces cerevisiae Pol32p, has been described as the third subunit of yeast pol delta. These studies provide evidence that p68 is a subunit of pol delta. In addition, the p68-70 and p32 polypeptides were found to be derived from the 70 and 32 kDa subunits of RPA, respectively.

NMR solution structure of the theta subunit of DNA polymerase III from Escherichia coli

The catalytic core of Escherichia coli DNA polymerase III contains three tightly associated subunits (alpha, epsilon, and theta). The theta subunit is the smallest, but the least understood of the three. As a first step in a program aimed at understanding its function, the structure of the theta subunit has been determined by triple-resonance multidimensional NMR spectroscopy. Although only a small protein, theta was difficult to assign fully because approximately one-third of the protein is unstructured, and some sections of the remaining structured parts undergo intermediate intramolecular exchange. The secondary structure was deduced from the characteristic nuclear Overhauser effect patterns, the 3J(HN alpha) coupling constants and the consensus chemical shift index. The C-terminal third of the protein, which has many charged and hydrophilic amino acid residues, has no well-defined secondary structure and exists in a highly dynamic state. The N-terminal two-thirds has three helical segments (Gln10-Asp19, Glu38-Glu43, and His47-Glu54), one short extended segment (Pro34-Ala37), and a long loop (Ala20-Glu29), of which part may undergo intermediate conformational exchange. Solution of the three-dimensional structure by NMR techniques revealed that the helices fold in such a way that the surface of theta is bipolar, with one face of the protein containing most of the acidic residues and the other face containing most of the long chain basic residues. Preliminary chemical shift mapping experiments with a domain of the epsilon subunit have identified a loop region (Ala20-Glu29) in theta as the site of association with epsilon.

Tracking sliding clamp opening and closing during bacteriophage T4 DNA polymerase holoenzyme assembly

The bacteriophage T4 DNA polymerase holoenzyme, consisting of the DNA polymerase (gp43), the sliding clamp (gp45), and the clamp loader (gp44/62), is loaded onto DNA in an ATP-dependent, multistep reaction. The trimeric, ring-shaped gp45 is loaded onto DNA such that the DNA passes through the center of the ring. gp43 binds to this complex, thereby forming a topological link with the DNA and increasing its processivity. Using stopped-flow fluorescence-resonance energy transfer, we have investigated opening and closing of the gp45 ring during the holoenzyme assembly process. Two amino acids that lie on opposite sides of the gp45 subunit interface, W91 and V162C labeled with coumarin, were used as the fluorescence donor and acceptor, respectively. Free in solution, gp45 has two closed subunit interfaces with W91 to V162-coumarin distances of 19 A and one open subunit interface with a W91 to V162C-coumarin distance of 40 A. Making the assumption that the distance across the two closed subunit interfaces is unchanged during the holoenzyme assembly process, we have found that the distance across the open subunit interface is first increased to greater than 45 A and is then decreased to 30 A during a 10-step assembly mechanism. The gp45 ring is not completely closed in the holoenzyme complex, consistent with previous evidence suggesting that the C-terminus of gp43 is inserted into the gp45 subunit interface. Unexpectedly, ATP-hydrolysis events are coupled to only a fraction of the total distance change, with conformational changes linked to binding DNA and gp43 coupled to the majority of the total distance change. Using the nonhydrolyzable ATP analogue ATP-gamma-S results in formation of a nonproductive gp45 x gp44/62 complex; however, adding an excess of ATP to this nonproductive complex results in rapid ATP/ATP-gamma-S exchange to yield a productive gp45 x gp44/62 complex within seconds.

Nonlinearity in genetic decoding: homologous DNA replicase genes use alternatives of transcriptional slippage or translational frameshifting

The tau and gamma subunits of DNA polymerase III are both encoded by a single gene in Escherichia coli and Thermus thermophilus. gamma is two-thirds the size of tau and shares virtually all its amino acid sequence with tau. E. coli and T. thermophilus have evolved very different mechanisms for setting the approximate 1:1 ratio between tau and gamma. Both mechanisms put ribosomes into alternate reading frames so that stop codons in the new frame serve to make the smaller gamma protein. In E. coli, approximately 50% of initiating ribosomes translate the dnaX mRNA conventionally to give tau, but the other 50% shift into the -1 reading frame at a specific site (A AAA AAG) in the mRNA to produce gamma. In T. thermophilus ribosomal frameshifting is not required: the dnaX mRNA is a heterogeneous population of molecules with different numbers of A residues arising from transcriptional slippage on a run of nine T residues in the DNA template. Translation of the subpopulation containing nine As (or +/- multiples of three As) yields tau. The rest of the population of mRNAs (containing nine +/- nonmultiples of three As) puts ribosomes into the alternate reading frames to produce the gamma protein(s). It is surprising that two rather similar dnaX sequences in E. coli and T. thermophilus lead to very different mechanisms of expression.

Two functional domains of the epsilon subunit of DNA polymerase III

The epsilon subunit is the 3'-->5' proofreading exonuclease that associates with the alpha and theta subunits in the E. coli DNA polymerase III. Two fragments of the epsilon protein were prepared, and binding of these epsilon fragments with alpha and theta was investigated using gel filtration chromatography and exonuclease stimulation assays. The N-terminal fragment of epsilon, containing amino acids 2-186 (epsilon186), is a relatively protease-resistant core domain of the exonuclease. The purified recombinant epsilon186 protein catalyzes the cleavage of 3' terminal nucleotides, demonstrating that the exonuclease domain of epsilon is present in the N-terminal region of the protein. The absence of the C-terminal 57 amino acids of epsilon in the epsilon186 protein reduces the binding affinity of epsilon186 for alpha by at least 400-fold relative to the binding affinity of epsilon for alpha. In addition, stimulation of the epsilon186 exonuclease by alpha using a partial duplex DNA is about 50-fold lower than stimulation of the epsilon exonuclease by alpha. These results indicate that the C-terminal region of epsilon is required in the epsilonalpha association. To directly demonstrate that the C-terminal region of epsilon contains the alpha-association domain fusion protein, constructs containing the maltose-binding protein (MBP) and fragments of the C-terminal region of epsilon were prepared. Gel filtration analysis demonstrates that the alpha-association domain of epsilon is contained within the C-terminal 40 amino acids of epsilon. Also, the epsilon186 protein forms a tight complex with theta, demonstrating that the association of theta with epsilon is localized to the N-terminal region of epsilon. Association of epsilon186 and theta is further supported by the stimulation of the epsilon186 exonuclease in the presence of theta. These data support the concept that epsilon contains a catalytic domain located within the N-terminal region and an alpha-association domain located within the C-terminal region of the protein.

ATP binding to the Escherichia coli clamp loader powers opening of the ring-shaped clamp of DNA polymerase III holoenzyme

The Escherichia coli gamma complex serves as a clamp loader, catalyzing ATP-dependent assembly of beta protein clamps onto primed DNA templates during DNA replication. These ring-shaped clamps tether DNA polymerase III holoenzyme to the template, facilitating rapid and processive DNA synthesis. This report focuses on the role of ATP binding and hydrolysis catalyzed by the gamma complex during clamp loading. We show that the energy from ATP binding to gamma complex powers several initial events in the clamp loading pathway. The gamma complex (gamma2 delta delta'chi psi) binds two ATP molecules (one per gamma subunit in the complex) with high affinity (Kd = 1-2. 5 x 10(-6) M) or two adenosine 5'-O-(3-thiotriphosphate)(ATPgammaS) molecules with slightly lower affinity (Kd = 5-6.5 x 10(-6) M). Experiments performed prior to the first ATP turnover (kcat = 4 x 10(-3) s-1 at 4 degreesC), or in the presence of ATPgammaS (kcat = 1 x 10(-4) s-1 at 37 degreesC), demonstrate that upon interaction with ATP the gamma complex undergoes a change in conformation. This ATP-bound gamma complex binds beta and opens the ring at the dimer interface. Still prior to ATP hydrolysis, the composite of gamma complex and the open beta ring binds with high affinity to primer-template DNA. Thus ATP binding powers all the steps in the clamp loading pathway leading up to the assembly of a gamma complex. open beta ring.DNA intermediate, setting the stage for ring closing and turnover of the clamp loader, steps that may be linked to subsequent hydrolysis of ATP.

Identification of dnaX as a high-copy suppressor of the conditional lethal and partition phenotypes of the parE10 allele

Termination of DNA replication, complete topological unlinking of the parental template DNA strands, partition of the daughter chromosomes, and cell division follow in an ordered and interdependent sequence during normal bacterial growth. In Escherichia coli, topoisomerase IV (Topo IV), encoded by parE and parC, is responsible for decatenation of the two newly formed chromosomes. In an effort to uncover the pathway of information flow between the macromolecular processes that describe these events, we identified dnaX, encoding the tau and gamma subunits of the DNA polymerase III holoenzyme, as a high-copy suppressor of the temperature-sensitive phenotype of the parE10 allele. We show that suppression derives from overexpression of the gamma, but not the tau, subunit of the holoenzyme and that the partition defect of parE10 cells is nearly completely reverted at the nonpermissive temperature as well. These observations suggest a possible association between Topo IV and the replication machinery.

Localization of the active site of the alpha subunit of the Escherichia coli DNA polymerase III holoenzyme

Using a deletion approach on the alpha subunit of DNA polymerase III from Escherichia coli, we show that there is an N-proximal polymerase domain which is distinct from a more C-proximal tau and beta binding domain. Although deletion of 60 residues from the alpha N terminus abolishes polymerase activity, deletions of 48, 169, and 342 amino acids from the C terminus progressively impair its catalytic efficiency but preserve an active site. Deletion of 342 C-terminal residues reduces k(cat) 46-fold, increases the Km for gapped DNA 5.5-fold, and increases the Km for deoxynucleoside triphosphates (dNTPs) twofold. The 818-residue protein with polymerase activity displays typical Michaelis-Menten behavior, catalyzing a polymerase reaction that is saturable with substrate and linear with time. With the aid of newly acquired sequences of the polymerase III alpha subunit from a variety of organisms, candidates for two key aspartate residues in the active site are identified at amino acids 401 and 403 of the E. coli sequence by inspection of conserved acidic amino acids. The motif Pro-Asp-X-Asp, where X is a hydrophobic amino acid, is shown to be conserved among all known DnaE proteins, including those from Bacillaceae, cyanobacteria, Mycoplasma, and mycobacteria. The E. coli DnaE deletion protein with only the N-terminal 366 amino acids does not have polymerase activity, consistent with the proposed position of the active-site residues.

Functionally interacting telomerase RNAs in the yeast telomerase complex

The ribonucleoprotein (RNP) enzyme telomerase from Saccharomyces cerevisiae adds telomeric DNA to chromosomal ends in short increments both in vivo and in vitro. Whether or not telomerase functions as a multimer has not been addressed previously. Here we show, first, that following polymerization, the telomerase RNP remains stably bound to its telomeric oligonucleotide reaction product. We then exploit this finding and a previously reported mutant telomerase RNA to demonstrate that, unexpectedly, the S. cerevisiae telomerase complex contains at least two functionally interacting RNA molecules that both act as templates for DNA polymerization. Here, functional telomerase contains at least two active sites.

Fidelity of Escherichia coli DNA polymerase III holoenzyme. The effects of beta, gamma complex processivity proteins and epsilon proofreading exonuclease on nucleotide misincorporation efficiencies

The fidelity of Escherichia coli DNA polymerase III (pol III) is measured and the effects of beta, gamma processivity and epsilon proofreading subunits are evaluated using a gel kinetic assay. Pol III holoenzyme synthesizes DNA with extremely high fidelity, misincorporating dTMP, dAMP, and dGMP opposite a template G target with efficiencies finc = 5.6 x 10(-6), 4.2 x 10(-7), and 7 x 10(-7), respectively. Elevated dGMP.G and dTMP.G misincorporation efficiencies of 3.2 x 10(-5) and 5.8 x 10(-4), attributed to a "dNTP-stabilized" DNA misalignment mechanism, occur when C and A, respectively, are located one base downstream from the template target G. At least 92% of misinserted nucleotides are excised by pol III holoenzyme in the absence of a next correct "rescue" nucleotide. As rescue dNTP concentrations are increased, pol III holoenzyme suffers a maximum 8-fold reduction in fidelity as proofreading of mispaired primer termini are reduced in competition with incorporation of a next correct nucleotide. Compared with pol III holoenzyme, the alpha holoenzyme, which cannot proofread, has 47-, 32-, and 13-fold higher misincorporation rates for dGMP.G, dTMP.G, and dAMP.G mispairs. Both the beta, gamma complex and the downstream nucleotide have little effect on the fidelity of catalytic alpha subunit. An analysis of the gel kinetic fidelity assay when multiple polymerase-DNA encounters occur is presented in the "Appendix" (see Fygenson, D. K., and Goodman, M. F. (1997) J. Biol. Chem. 272, 27931-27935 (accompanying paper)).

Thermus thermophilis dnaX homolog encoding gamma- and tau-like proteins of the chromosomal replicase

This report identifies the dnaX homolog from Thermus thermophilis. Replicases from bacteria to humans contain subunits that are homologous to one another. These homologs are subunits of a clamp loading apparatus that loads sliding clamps onto DNA, which in turn act as mobile tethers for the replication machinery. In Escherichia coli, two of these subunits (gamma and tau) are encoded by one gene (dnaX) in nearly equal amounts by way of an efficient translational frameshift. The gamma and tau subunits form the central touchpoint that holds together two DNA polymerases with one clamp loading apparatus to form the E. coli chromosomal replicase, DNA polymerase III holoenzyme. The E. coli holoenzyme is an efficient replication machine that simultaneously replicates both strands of duplex DNA. The T. thermophilis dnaX homolog also contains a frameshift signature and produces both tau- and gamma-like proteins. Recombinant T. thermophilis tau- and gamma-like proteins, expressed in E. coli, have an oligomeric state similar to that of their E. coli counterparts and display ATPase activity that is stimulated by DNA. These results imply that T. thermophilis utilizes a DNA polymerase III holoenzyme replication machinery similar to that of E. coli.

A DNA polymerase III holoenzyme-like subassembly from an extreme thermophilic eubacterium

We have purified a novel DNA polymerase from Thermus thermophilus. This was enabled by use of general gap filling assays to monitor polymerase activity and cross-reactive monoclonal antibodies against the alpha catalytic subunit of E. coli DNA polymerase III holoenzyme to distinguish a novel polymerase from the well characterized DNA polymerase I-like Thermus thermophilus DNA polymerase. Two proteins migrating with the polymerase after three chromatographic steps were isolated and subjected to partial amino acid sequencing. The amino termini of both were homologous to the two products of the E. coli dnaX gene, the gamma and tau subunits of the DNA polymerase III holoenzyme. Using this information and sequences conserved among dnaX-like genes, we isolated a gene fragment by PCR and used it as a probe to isolate the full length Thermus thermophilus dnaX gene. The deduced amino acid sequence is highly homologous to the DnaX proteins of other bacteria. Examination of the sequence permitted identification of a frameshift site similar to the one used in E. coli to direct the synthesis of the shorter gamma DnaX-gene product. Based on this information, we conclude that a conventional replicase exists in extreme thermophilic eubacteria. The general biological and practical technological implications of this finding are discussed.

Dynamics of loading the beta sliding clamp of DNA polymerase III onto DNA

A "minimal" DNA primer-template system, consisting of an 80-mer template and 30-mer primer, supports processive DNA synthesis by DNA polymerase III core in the presence of the beta sliding clamp, gamma complex clamp loader, and single-stranded binding protein from Escherichia coli. This primer-template system was used to measure the loading of the beta sliding clamp by the gamma complex in an ATP-dependent reaction. Bound protein-DNA complexes were detected by monitoring fluorescence depolarization of DNA. Steady state and time-resolved anisotropies were measured, and stopped-flow pre-steady state fluorescence measurements allowed visualization of the loading reactions in real time. The rate of loading beta onto DNA was 12 s-1, demonstrating that clamp assembly is rapid on the time scale required for lagging strand Okazaki fragment synthesis. The association rate appears to be limited by an intramolecular step occurring prior to the clamp-loading reaction, possibly the opening of the toroidal beta dimer.

Kinetic mechanism of the 3'-->5' proofreading exonuclease of DNA polymerase III. Analysis by steady state and pre-steady state methods

DNA polymerase III holoenzyme is the major replicative enzyme in Escherichia coli. An important component of the high-fidelity DNA synthesis that is characteristic of DNA polymerase III holoenzyme is the 3'-->5' proofreading exonuclease activity resident in the epsilon subunit. Steady state and pre-steady state conditions have been used to determine equilibrium and Michaelis constants for substrate binding and the rate constant for cleavage by purified epsilon subunit. The steady state kinetic constants are K(m) = 16 +/- 6 microM and kcat = 210 +/- 23 s-1 for degradation of single-stranded DNA by epsilon. These steady state values are in agreement with the rate constants determined for excision of the 3' nucleotide of a dT10 oligomer under pre-steady state conditions. Using a simple two-step model, E + Dn reversible E.Dn-->E + Dn-1, we find K = 12 microM and kf = 280 s-1 for the dT10 substrate. In these experiments, epsilon subunit acts in a distributive manner and product release is not the rate-limiting step. Activity of the epsilon subunit on paired DNA oligonucleotides with zero to three mismatches at the 3' terminus indicates that an additional step is required in the mechanism. In the scheme Dn reversible Dn* + E reversible E.Dn*-->E + Dn-1, the 3' terminus undergoes a conformational change or "melts" before the DNA is a substrate for epsilon subunit. With this additional step, the values for binding of activated substrate and cleavage are the same as those for single-stranded DNA. The kinetics for exonucleolytic degradation of single-stranded, paired, and mispaired oligonucleotides support the model that the rate-limiting step in exonucleolytic proofreading of DNA by epsilon subunit is the DNA-melting step.

The interaction between helicase and primase sets the replication fork clock

The synthesis of an Okazaki fragment occurs once every 1-2 s at the Escherichia coli replication fork and requires precise coordination of the enzymatic activities required. We have shown previously that the primase is recruited anew from solution for each cycle of Okazaki fragment synthesis and that association of primase with the replication fork is via a protein-protein interaction with the helicase, DnaB. We describe here mutant primases that have an altered interaction with DnaB and that direct the synthesis of Okazaki fragments of altered length compared to the wild-type. The mutant primases were deficient only in their ability to participate in replication reactions where their entry to the DNA was provided by the initial protein-protein interaction with DnaB. The primer synthesis capacity of these proteins remained unaffected, as was their ability to interact with the DNA polymerase III holoenzyme. Neither replication fork rate nor the efficiency of primer utilization was affected at replication forks programmed by the mutant enzymes. Thus, the interaction between DnaG and DnaB at the replication fork is the primary regulator of the cycle of Okazaki fragment synthesis.

Identification of the beta-binding domain of the alpha subunit of Escherichia coli polymerase III holoenzyme

Rapid and processive DNA synthesis by Escherichia coli DNA polymerase III holoenzyme is achieved by the direct interaction between the alpha subunit of DNA polymerase III core and the beta sliding clamp (LaDuca, R. J., Crute, J. J., McHenry, C. S., and Bambara, R. A. (1986) J. Biol. Chem. 261, 7550-7557; Stukenberg, T. P., Studwell-Vaughan, P. S., and O'Donnell, M. (1991) J. Biol. Chem. 266, 11328-11334). In this study, we localized the beta-binding domain of alpha to a carboxyl-terminal region by quantifying the interaction of beta with a series of alpha deletion proteins. Purification and binding analysis was facilitated by insertion of hexahistidine and short biotinylation sequences on the deletion terminus of alpha. Interaction of beta with alpha deletion proteins was studied by gel filtration and surface plasmon resonance. alpha lacking 169 COOH-terminal residues still possessed beta-binding activity; whereas deletion of 342 amino acids from the COOH terminus abolished beta binding. Deletion of 542 amino acids from the NH2 terminus of the 1160 residue alpha subunit resulted in a protein that bound beta 10-20-fold more strongly than native alpha. Hence, portions of alpha between residues 542 and 991 are involved in beta binding. DNA binding to alpha apparently triggers an increased affinity for beta (Naktinis, V., Turner, J., and O'Donnell, M. (1996) Cell 84, 137-145). Our findings extend this observation by implicating the amino-terminal polymerase domain in inducing a low affinity taut conformation in the carboxyl-terminal beta-binding domain. Deletion of the polymerase domain (or, presumably, its occupancy by DNA) relaxes the COOH-terminal domain, permitting it to assume a conformation with high affinity for beta.

In vivo assembly of overproduced DNA polymerase III. Overproduction, purification, and characterization of the alpha, alpha-epsilon, and alpha-epsilon-theta subunits

The genes for the polymerase core (alphaepsilontheta) of the DNA polymerase III holoenzyme map to widely separated loci on the Escherichia coli chromosome. To enable efficient overproduction and in vivo assembly of DNA polymerase III core, artificial operons containing the three structural genes, dnaE, dnaQ, and holE, were placed in an expression plasmid. The proteins alpha, alphaepsilon and alphaepsilontheta were overexpressed and assembled in E. coli and purified to homogeneity. The three purified polymerases had a similar specific activity of about 6.0 x 10(6) units/mg in a gap-filling assay. Kinetics studies showed that neither epsilon nor theta influenced the Km of alpha for deoxynucleotide triphosphate and only slightly decreased the Km of alpha for DNA, although epsilon was absolutely required for maximal DNA synthesis. The rate of DNA synthesis by alpha-reconstituted holoenzyme using tau complex was about 5-fold less than that of alphaepsilon or alphaepsilontheta-reconstituted holoenzyme as determined by a gel analysis. The processivity of alpha-reconstituted holoenzyme was very similar to that of alphaepsilontheta-reconstituted holoenzyme when tau complex was used as a clamp loader.

Biotin tagging deletion analysis of domain limits involved in protein-macromolecular interactions. Mapping the tau binding domain of the DNA polymerase III alpha subunit

The tau subunit dimerizes DNA polymerase III via interaction with the alpha subunit, allowing DNA polymerase III holoenzyme to synthesize both leading and lagging strands simultaneously at the DNA replication fork. Here, we report a general method to map the limits of domains required for heterologous protein-protein interactions using surface plasmon resonance. The method employs fusion of a short biotinylation sequence at either the NH2 or COOH terminus of the protein to be immobilized on streptavidin-derivatized biosensor chips. Inclusion of a hexahistidine sequence permits rapid purification and separation of the fusion protein from the endogenous Escherichia coli biotin carboxyl carrier protein. Ten deletions of the alpha subunit were constructed and purified by Ni2+-nitrilotriacetic acid chromatography and, when required, monomeric avidin chromatography. Each alpha deletion protein was captured by streptavidin immobilized on a Pharmacia Biosensor BIAcore chip, and the tau binding activity of each alpha deletion was analyzed using surface plasmon resonance. The tau subunit bound very tightly to a full-length amino-terminal fusion of the biotinylation sequence with alpha (KD approximately 70 pm). Four additional NH2-terminal alpha deletion proteins (60, 240, 360, and 542 residues deleted) retained strong binding activity to the tau subunit (KD = 0.19-0.39 nM), whereas deletion of 705 residues or more from the NH2 terminus of the alpha subunit abolished tau binding activity. Full-length alpha that contained a carboxyl-terminal fusion with the biotinylation sequence bound tau strongly (KD = 0.37 nM). However, deletion of 48 amino acids from the COOH terminus totally eliminated tau binding. These results indicate that the COOH-terminal half of the alpha subunit is involved in tau interaction.

Coupling of a replicative polymerase and helicase: a tau-DnaB interaction mediates rapid replication fork movement

The E. coli replication fork synthesizes DNA at the rate of nearly 1000 nt/s. We show here that an interaction between the tau subunit of the replicative polymerase (the DNA polymerase III holoenzyme) and the replication fork DNA helicase (DnaB) is required to mediate this high rate of replication fork movement. In the absence of this interaction, the polymerase follows behind the helicase at a rate equal to the slow (approximately 35 nt/s) unwinding rate of the helicase alone, whereas upon establishing a tau-DnaB contact, DnaB becomes a more effective helicase, increasing its translocation rate by more than 10-fold. This finding establishes the existence of both a physical and communications link between the two major replication machines in the replisome: the DNA polymerase and the primosome.

A molecular switch in a replication machine defined by an internal competition for protein rings

Replication machines use ring-shaped clamps that encircle DNA to tether the polymerase to the chromosome. The clamp is assembled on DNA by a clamp loader. This report shows that the polymerase and clamp loader coordinate their actions with the clamp by competing for it through overlapping binding sites. The competition is modulated by DNA. In the absence of DNA, the clamp associates with the clamp loader. But after the clamp is placed on DNA, the polymerase develops a tight grip on the clamp and out-competes the clamp loader. After replication of the template, the polymerase looses affinity for the clamp. Now the clamp loader regains access to the clamp and removes it from DNA thus recycling it for future use.

Isolation and characterization of inhibitory factors of DNA polymerase III holoenzyme from Escherichia coli

We isolated fractions by Mono Q chromatography that inhibited the activity of Escherichia coli DNA polymerase III holoenzyme using an assay system with a primed single-stranded DNA template coated with single-stranded DNA binding protein (SSB). The inhibitory activities were inactivated by heat-treatment at 100 degrees C for 10 min, suggesting that they are proteins. The factors did not inhibit the activity of RNA polymerase of Escherichia coli. The inhibitory effects were less potent for the activities of the large (Klenow) fragment of DNA polymerase I and T4 DNA polymerase than for DNA polymerase III holoenzyme. No degradation of single- or double-stranded DNA was observed in the fractions, indicating that inhibition was not due to degradation of the DNA.

Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. IV. ATP-binding site mutants identify the clamp loader

The gamma complex (gamma delta delta' chi psi) and tau complex (tau delta delta' chi psi) clamp loaders require ATP hydrolysis to load beta sliding clamps onto DNA. The beta sliding clamp tethers the polymerase (Pol) III* replicase to DNA for processive synthesis. Pol III* contains both gamma and tau, but only one each of the delta, delta', chi, and psi subunits. Hence, there is ambiguity with respect to which clamp loader, the gamma or tau complex, exists in the Pol III* replicase structure. In this study, ATP-binding site mutants of gamma and tau have been prepared, and these mutants, when assembled into either the gamma or tau complex, are inactive in clamp loading. These mutants have been used as a tool to determine the identity of the clamp loader in Pol III*. The nine-subunit Pol III* has been assembled using either mutant gamma or tau in place of wild-type gamma or tau. The results show that mutation of gamma inactivates Pol III* activity, but mutation of tau does not, indicating that the gamma complex (and not the tau complex) is the clamp loader of Pol III*. The tau subunit carries the task of dimerizing the core polymerase, and it is this association of tau with core that appears to direct the single copy subunits away from tau and onto gamma.

Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. V. Four different polymerase-clamp complexes on DNA

Several different subassemblies of DNA polymerase III holoenzyme can be purified from Escherichia coli. Toward the goal of understanding the functional significance of these subassemblies, we have used the gamma complex clamp loader and the beta ring to assemble each different polymerase onto DNA. Through use of radioactive labeled proteins, the subunit structure of each resulting processive polymerase has been determined. Use of DNA polymerase III core, the gamma complex, and beta results in a core-beta complex on DNA; the gamma complex is not incorporated into the structure. The addition of tau to the assembly reaction to form either core1-tau 2 or core2-tau 2 results in a more efficient polymerase and more stabile association of core-tau beta on DNA, although the gamma complex still does not remain on DNA. The gamma complex clamp loader was retained on DNA with the other subunits only if it was first assembled into the polymerase (Pol) III* structure. The clamp loader within Pol III* appeared to be capable of loading two beta clamps onto DNA for both core polymerases within Pol III*, consistent with the hypothesis that one replicase can simultaneously replicate both strands of a duplex chromosome. These findings extend those of an earlier study showing that distinctive polymerases can be assembled depending on the presence or absence of tau (Maki, S., and Kornberg, A. (1988) J. Biol. Chem. 263, 6561-6569). The significance of these distinct polymerases in separate paths of DNA metabolism is discussed.

Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. I. Organization of the clamp loader

The gamma complex of DNA polymerase III holoenzyme, the replicase of Escherichia coli, couples ATP hydrolysis to the loading of beta sliding clamps onto primed DNA. The beta sliding clamp tethers the holoenzyme replicase to DNA for rapid and processive synthesis. In this report, the gamma complex has been constituted from its five different subunits. Size measurements and subunit stoichiometry studies show a composition of gamma 2 delta 1 delta' 1 1 chi 1 psi 1. Strong intersubunit contacts have been identified by gel filtration, and weaker contacts were identified by surface plasmon resonance measurements. An analogous tau complex has also been constituted and characterized; it is nearly as active as the gamma complex in clamp loading activity, but as shown in the fourth report of this series, it is at a disadvantage in binding the delta, delta', chi, and psi subunits when core is present (Xiao, H., Naktinis, V., and O'Donnell, M. (1995) J. Biol. Chem. 270, 13378-13383). The single copy subunits within the gamma complex provide the basis for the structural asymmetry inherent within DNA polymerase III holoenzyme.

Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. III. Interface between two polymerases and the clamp loader

The nine-subunit DNA polymerase (Pol) III* coupled to its beta sliding clamp is a rapid and highly processive replicating machine. The multiple subunits are needed for the complicated task of duplicating the Escherichia coli chromosome. In this report, Pol III* was constituted from individual pure proteins, and its structure was studied. Constitution of the Pol III* particle requires an ordered addition of the subunits, and the final structure contains 14 polypeptides in the ratio alpha 2 epsilon 2 theta 2 tau 2 gamma 2 delta 1 delta' 1 chi 1 psi 1. The structure can be summarized as being composed of two core polymerases (alpha epsilon theta) held together by a dimer of tau and one gamma complex clamp loader (gamma 2 delta 1 delta' 1 chi 1 psi 1) for loading beta onto DNA. At the center of the structure, the related tau and gamma subunits form a heterotetramer upon which the two core polymerases and clamp loader proteins assemble. The single copy nature of the delta, delta', chi, and psi subunits confers a structural asymmetry with respect to the two polymerases, presumably for the different functions of replicating the leading and lagging strands.

DNA replication. A familiar ring to DNA polymerase processivity

Structural similarity reveals that prokaryotic and eukaryotic DNA polymerases share a mechanism for processivity--but the conservation of additional chromosomal replication mechanisms remains to be determined.

Mutations in Escherichia coli dnaA which suppress a dnaX(Ts) polymerization mutation and are dominant when located in the chromosomal allele and recessive on plasmids

Extragenic suppressor mutations which had the ability to suppress a dnaX2016(Ts) DNA polymerization defect and which concomitantly caused cold sensitivity have been characterized within the dnaA initiation gene. When these alleles (designated Cs, Sx) were moved into dnaX+ strains, the new mutants became cold sensitive and phenotypically were initiation defective at 20 degrees C (J.R. Walker, J.A. Ramsey, and W.G. Haldenwang, Proc. Natl. Acad. Sci. USA 79:3340-3344, 1982). Detailed localization by marker rescue and DNA sequencing are reported here. One mutation changed codon 213 from Ala to Asp, the second changed Arg-432 to Leu, and the third changed codon 435 from Thr to Lys. It is striking that two of the three spontaneous mutations occurred in codons 432 and 435; these codons are within a very highly conserved, 12-residue region (K. Skarstad and E. Boye, Biochim. Biophys. Acta 1217:111-130, 1994; W. Messer and C. Weigel, submitted for publication) which must be critical for one of the DnaA activities. The dominance of wild-type and mutant alleles in both initiation and suppression activities was studied. First, in initiation function, the wild-type allele was dominant over the Cs, Sx alleles, and this dominance was independent of location. That is, the dnaA+ allele restored growth to dnaA (Cs, Sx) strains at 20 degrees C independently of which allele was present on the plasmid. The dnaA (Cs, Sx) alleles provided initiator function at 39 degrees C and were dominant in a dnaA(Ts) host at that temperature. On the other hand, suppression was dominant when the suppressor allele was chromosomal but recessive when it was plasmid borne. Furthermore, suppression was not observed when the suppressor allele was present on a plasmid and the chromosomal dnaA was a null allele. These data suggest that the suppressor allele must be integrated into the chromosome, perhaps at the normal dnaA location. Suppression by dnaA (Cs, Sx) did not require initiation at oriC; it was observed in strains deleted of oriC and which initiated at an integrated plasmid origin.

An explanation for lagging strand replication: polymerase hopping among DNA sliding clamps

The replicase of E. coli, DNA polymerase III holoenzyme, is tightly fastened to DNA by its ring-shaped beta sliding clamp. However, despite being clamped to DNA, the polymerase must rapidly cycle on and off DNA to synthesize thousands of Okazaki fragments on the lagging strand. This study shows that DNA polymerase III holoenzyme cycles from one DNA to another by a novel mechanism of partial disassembly of its multisubunit structure and then reassembly. Upon completing a template, the polymerase disengages from its beta clamp, hops off DNA, and reassociates with another beta clamp at a new primed site. The original beta clamp is left on DNA and may be harnessed by other machineries to coordinate their action with chromosome replication.

holE, the gene coding for the theta subunit of DNA polymerase III of Escherichia coli: characterization of a holE mutant and comparison with a dnaQ (epsilon-subunit) mutant

DNA polymerase III holoenzyme is a multiprotein complex responsible for the bulk of chromosomal replication in Escherichia coli and Salmonella typhimurium. The catalytic core of the holoenzyme is an alpha epsilon theta heterotrimer that incorporates both a polymerase subunit (alpha; dnaE) and a proofreading subunit (epsilon; dnaQ). The role of theta is unknown. Here, we describe a null mutation of holE, the gene for theta. A strain carrying this mutation was fully viable and displayed no mutant phenotype. In contrast, a dnaQ null mutant exhibited poor growth, chronic SOS induction, and an elevated spontaneous mutation rate, like dnaQ null mutants of S. typhimurium described previously. The poor growth was suppressible by a mutation affecting alpha which was identical to a suppressor mutation identified in S. typhimurium. A double mutant null for both holE and dnaQ was indistinguishable from the dnaQ single mutant. These results show that the theta subunit is dispensable in both dnaQ+ and mutant dnaQ backgrounds, and that the phenotype of epsilon mutants cannot be explained on the basis of interference with theta function.

Identification, molecular cloning and characterization of the gene encoding the chi subunit of DNA polymerase III holoenzyme of Escherichia coli

We have identified a previously reported open reading frame (ORF13) that maps between pepA and valS at 96.6 centisomes of the Escherichia coli genome as the structural gene for the chi subunit of DNA polymerase III holoenzyme. This conclusion is supported by a perfect match of the amino-terminal 24 residues of chi with the DNA sequence of ORF13 and a demonstration that ORF13 directs expression of a protein that co-migrates with authentic chi on SDS-polyacrylamide gels. ORF13, designated holC, was isolated from the E. coli chromosome and inserted into a tac promoter-based expression plasmid to direct production of the chi subunit to 5-7% of the total soluble protein. The 3' end of holC was sequenced to resolve discrepancies between two published versions.

The Escherichia coli DNA polymerase III holoenzyme contains both products of the dnaX gene, tau and gamma, but only tau is essential

The replicative polymerase of Escherichia coli, DNA polymerase III, consists of a three-subunit core polymerase plus seven accessory subunits. Of these seven, tau and gamma are products of one replication gene, dnaX. The shorter gamma is created from within the tau reading frame by a programmed ribosomal -1 frameshift over codons 428 and 429 followed by a stop codon in the new frame. Two temperature-sensitive mutations are available in dnaX. The 2016(Ts) mutation altered both tau and gamma by changing codon 118 from glycine to aspartate; the 36(Ts) mutation affected the activity only of tau because it altered codon 601 (from glutamate to lysine). Evidence which indicates that, of these two proteins, only the longer tau is essential includes the following. (i) The 36(Ts) mutation is a temperature-sensitive lethal allele, and overproduction of wild-type gamma cannot restore its growth. (ii) An allele which produced tau only could be substituted for the wild-type chromosomal gene, but a gamma-only allele could not substitute for the wild-type dnaX in the haploid state. Thus, the shorter subunit gamma is not essential, suggesting that tau can be substitute for the usual function(s) of gamma. Consistent with these results, we found that a functional polymerase was assembled from nine pure subunits in the absence of the gamma subunit. However, the possibility that, in cells growing without gamma, proteolysis of tau to form a gamma-like product in amounts below the Western blot (immunoblot) sensitivity level cannot be excluded.

Identification, isolation, and characterization of the structural gene encoding the delta' subunit of Escherichia coli DNA polymerase III holoenzyme

The gene encoding the delta' subunit of DNA polymerase III holoenzyme, designated holB, was cloned by a strategy in which peptide sequence was used to derive a DNA hybridization probe. The gene maps to 24.95 centisomes of the chromosome. Sequencing of holB revealed a 1,002-bp open reading frame predicted to produce a 36,936-Da protein. The gene has a ribosome-binding site and promoter that are highly similar to the consensus sequences and is flanked by two potential open reading frames. Protein sequence analysis of delta' revealed a high degree of similarity to the dnaX gene products of Escherichia coli and Bacillus subtilis, including one stretch of 10 identical amino acid residues. A lesser degree of similarity to the gene 44 protein of bacteriophage T4 and the 40-kDa protein of the A1 complex (replication factor C) of HeLa cells was seen. The gene, when placed into a tac promoter-based expression plasmid, directed expression of two proteins of similar size. By immunodetection with anti-holoenzyme immunoglobulin G, both proteins are judged to be products of holB.

Replication of damaged DNA and the molecular mechanism of ultraviolet light mutagenesis

On UV irradiation of Escherichia coli cells, DNA replication is transiently arrested to allow removal of DNA damage by DNA repair mechanisms. This is followed by a resumption of DNA replication, a major recovery function whose mechanism is poorly understood. During the post-UV irradiation period the SOS stress response is induced, giving rise to a multiplicity of phenomena, including UV mutagenesis. The prevailing model is that UV mutagenesis occurs by the filling in of single-stranded DNA gaps present opposite UV lesions in the irradiated chromosome. These gaps can be formed by the activity of DNA replication or repair on the damaged DNA. The gap filling involves polymerization through UV lesions (also termed bypass synthesis or error-prone repair) by DNA polymerase III. The primary source of mutations is the incorporation of incorrect nucleotides opposite lesions. UV mutagenesis is a genetically regulated process, and it requires the SOS-inducible proteins RecA, UmuD, and UmuC. It may represent a minor repair pathway or a genetic program to accelerate evolution of cells under environmental stress conditions.

Molecular cloning, sequencing, and overexpression of the structural gene encoding the delta subunit of Escherichia coli DNA polymerase III holoenzyme

Using an oligonucleotide hybridization probe, we have mapped the structural gene for the delta subunit of Escherichia coli DNA polymerase III holoenzyme to 14.6 centisomes of the chromosome. This gene, designated holA, was cloned and sequenced. The sequence of holA matches precisely four amino acid sequences obtained for the amino terminus of delta and three internal tryptic peptides. A holA-overproducing plasmid that directs the expression of delta up to 4% of the soluble protein was constructed. Sequence analysis of holA revealed a 1,029-bp open reading frame that encodes a protein with a predicted molecular mass of 38,703 Da. holA may reside downstream of rlpB in an operon, perhaps representing yet another link between structural genes for the DNA polymerase III holoenzyme and proteins involved in membrane biogenesis. These and other features are discussed in terms of genetic regulation of delta-subunit synthesis.