Comparison of protein adsorption isotherms and uptake rates in preparative cation-exchange materials

Protein adsorption and transport in polymer-functionalized ion-exchangers

A wide variety of stationary phases is available for use in preparative chromatography of proteins, covering different base matrices, pore structures and modes of chromatography. There has recently been significant growth in the number of such materials in which the base matrix is derivatized to add a covalently attached or grafted polymer layer or, in some cases, a hydrogel that fills the pore space. This review summarizes the main structural and functional features of ion exchangers of this kind, which represent the largest class of such materials. Although the adsorption and transport properties may generally be used operationally and modeled phenomenologically using the same methods as are used for proteins in conventional media, there are noteworthy mechanistic differences in protein behavior in these adsorbents. A fundamental difference in protein retention is that it may be portrayed as partitioning into a three-dimensional polymer phase rather than adsorption at an extended two-dimensional surface, as applies in more conventional media. Beyond this partitioning behavior, however, the polymer-functionalized media often display rapid intraparticle transport that, while qualitatively comparable to that in conventional media, is sufficiently rapid quantitatively under certain conditions that it can lead to clear benefits in key measures of performance such as the dynamic binding capacity. Although possible mechanistic bases for the retention and transport properties are discussed, appreciable areas of uncertainty make detailed mechanistic modeling very challenging, and more detailed experimental characterization is likely to be more productive.

Process evaluations and economic analyses of recombinant human lysozyme and hen egg-white lysozyme purifications

Human lysozyme and hen egg-white lysozyme have antibacterial, antiviral, and antifungal properties with numerous potential commercial applications. Currently, hen egg-white lysozyme dominates low cost applications but the recent high-level expression of human lysozyme in rice could provide an economical source of lysozyme. This work compares human lysozyme and hen egg-white lysozyme adsorption to the cation exchange resin, SP-Sepharose FF, and the effect of rice extract components on lysozyme purification. With one exception, the dynamic binding capacities of human lysozyme were lower than those of hen egg-white at pH 4.5, 6, and 7.5 with ionic strengths ranging from 0 to 100 mM (5-20 mS). Ionic strength and pH had a similar effect on the adsorption capacities, but human lysozyme was more sensitive to these two factors than hen egg-white lysozyme. In the presence of rice extract, the dynamic binding capacities of human and hen egg-white lysozymes were reduced by 20-30% and by 32-39% at pH 6. Hen egg-white lysozyme was used as a benchmark to compare the effectiveness of human lysozyme purification from transgenic rice extract. Process simulation and cost analyses for human lysozyme purification from rice and hen egg-white lysozyme purification from egg-white resulted in similar unit production costs at 1 ton per year scale.

Relation of structure to performance characteristics of monolithic and perfusive stationary phases

Commercially available polymer-based monolithic and perfusive stationary phases were evaluated for their applicability in chromatography of biologics. Information on bed geometry, including that from electron microscopy (EM), was used to interpret and predict accessible volumes, binding capacities, and pressure drops. For preparative purification of biologics up to at least 7 nm in diameter, monoliths and perfusive resins are inferior to conventional stationary phases due to their low binding capacities (20-30 g/L for BSA). For larger biologics, up to several hundred nanometers in diameter, calculations from EM images predict a potential increase in binding capacity to nearly 100 g/L. The accessible volume for adenovirus calculated from the EM images matched the experimental value. While the pores of perfusive resins are essentially inaccessible to adenovirus under binding conditions, under non-adsorbing conditions the accessible intrabead porosity is almost as large as the interbead porosity. Modeling of breakthrough curves showed that the experimentally observed slow approach to full saturation can be explained by the distribution of pore sizes.

Multiscale modeling of protein uptake patterns in chromatographic particles

A parallel diffusion model is presented to explain an apparent transition in uptake mechanism seen in experimental observations of protein uptake into porous adsorbents. While such models have been invoked previously, this mesoscopic description is augmented here by microscopic models for representing surface diffusion by "hopping" and adsorption within a Gibbs surface excess formulation. These contributions lead to a relation for the apparent protein diffusivity as a function of adsorption conditions, which can be used predictively with knowledge of a few readily measured physical quantities. The approach can be useful in seeking optimal conditions for preparative protein chromatography separations.

Chromatography of proteins on charge-variant ion exchangers and implications for optimizing protein uptake rates

Intraparticle transport of proteins usually represents the principal resistance controlling their uptake in preparative separations. In ion-exchange chromatography two limiting models are commonly used to describe such uptake: pore diffusion, in which only free protein in the pore lumen contributes to transport, and homogeneous diffusion, in which the transport flux is determined by the gradient in the total protein concentration, free or adsorbed. Several studies have noted a transition from pore to homogeneous diffusion with increasing ionic strength in some systems, and here we investigate the mechanistic basis for this transition. The studies were performed on a set of custom-synthesized methacrylate-based strong cation exchangers differing in ligand density into which uptake of two proteins was examined using confocal microscopy and frontal loading experiments. We find that the transition in uptake mechanism occurs in all cases studied, and generally coincides with an optimum in the dynamic binding capacity at moderately high flow rates. The transition appears to occur when protein-surface attraction is weakened sufficiently, and this is correlated with the isocratic retention factor k' for the system of interest: the transition occurs in the vicinity of k' approximately 3000. This result, which may indicate that adsorption is sufficiently weak to allow the protein to diffuse along or near the surface, provides a predictive basis for optimizing preparative separations using only isocratic retention data.

A novel approach to characterize the binding orientation of lysozyme on ion-exchange resins

Much work has been done to qualify and quantify chromatographic adsorption and transportation mechanisms in different adsorber materials. An important aspect in all studies is the understanding of the binding mechanism between protein and resin on a molecular level in order to optimize processes on the level of adsorber design. We established a method to determine the binding orientation of lysozyme for different materials under various experimental conditions enabling us to observe changes in the mode of adsorption. We varied the protein load of two different adsorber types, Source 15S, a conventional cation exchange resin and EMD Fractogel SO(3), a tentacle-type cation exchanger. We found similar preferential binding sites for the interaction between lysozyme and the surface of these adsorbers at low surface coverage, however, the tentacle adsorber exhibited multi-point binding whereas the binding on Source was limited to one binding site only. With increasing protein density on the surface, lysozyme rotates from a space-consuming side-on to a space-saving end-on orientation on Fractogel, explaining a higher maximum binding capacity for Fractogel. This re-orientation could not be observed for Source.

The influence of major components on the direct chromatographic recovery of a protein from transgenic milk

This work presents a systematic evaluation of the influence of lipids and casein on the performance of a chromatographic capture step for the recovery of a target protein from transgenic milk. Lactoperoxidase (LPO) was spiked at concentrations typical of those to be expected for transgenic proteins in commercial bovine milk and the dynamic adsorption of LPO to fixed beds of SP Sepharose FF studied in frontal analysis experiments. By removing successively selected components from whole milk, their individual influence on the dynamic adsorption behaviour of LPO could be studied. A mathematical model, fitted to the breakthrough curves of LPO, provided a quantitative measure of parameters describing mass transfer and adsorption in the column. A significant reduction in column capacity for LPO in the presence of milk or whey was recorded, which could be attributed to competing adsorption of alkaline earth metal ions to the cation exchange resin. While the high concentrations of lipids present in whole milk did strongly reduce the column permeability, no significant influence of either casein or low concentrations of lipids on the hydraulic properties of columns or on the adsorption of LPO could be detected. The results indicate that chromatography, which forms an essential part of all current large-scale processes for the recovery of proteins from transgenic milk, could potentially be moved further upstream. Alternatively, existing operations for the removal of lipid and casein could be re-designed so as to maximise product yields. This suggests that significant product losses during current pre-chromatography milk purification could be reduced or potentially even avoided.

Modeling and simulation of protein uptake in cation exchanger visualized by confocal laser scanning microscopy

Confocal laser scanning microscopy (CLSM) has been extensively applied in the area of protein chromatography to investigate the uptake mechanism of protein in adsorbents. However, due to the light attenuation in the deeper layers of a specimen, quantitative analysis using CLSM data is still far from reality. In this work, an attenuation equation for describing the darkening of the CLSM image in the deeper scanning layers was developed. Bovine serum albumin (BSA) adsorption to SP Sepharose FF was performed by batch adsorption and micro-column chromatography on which protein concentration in single absorbents were visualized by CLSM. The parameters in the equation were estimated by fitting it to the fluorescence intensity profiles obtained at adsorption equilibrium, and then the equation was used to simulate the effect caused by the light scattering and absorption. CLSM analysis demonstrated that BSA adsorption to SP Sepharose FF followed the shrinking core pattern and was predicted reasonably well by the pore diffusion model in combination with the attenuation equation. By comparison of the CLSM data with the simulations, it shows that the attenuation equation was useful to demonstrate the validity of an intraparticle mass transport model for the estimation of intraparticle protein concentration profiles.

Pore size distributions of ion exchangers and relation to protein binding capacity

The pore structure of chromatographic media directly influences macromolecular transport and adsorption, and consequently separation resolution and loading capacity in chromatographic separations. The pore size distribution (PSD) is therefore a central structural characteristic of chromatographic materials and a critical determinant of chromatographic behavior. In this work the PSDs of a set of commercial anion exchangers were determined by inverse size-exclusion chromatography (ISEC). The PSDs were further utilized to develop relations to functional properties of adsorbents, such as intraparticle diffusivity, and static and dynamic binding capacities. We find that the detailed PSD is useful in semi-quantitative understanding of chromatographic behavior. However, more accurate prediction of column behavior requires more thorough knowledge of the pore structure, specifically the connectivity of the pore network, as well as improved understanding of the function of grafted resins.

Comparison of chromatographic ion-exchange resins

Strong and weak cation-exchangers were compared for a number of chromatographic parameters, i.e. pH dependence, efficiency, binding strength, particle size distribution, static and dynamic capacity, and scanning electron microscopy (SEM) pictures. Chromatographic resins investigated were Fractogel EMD SO3- (M), Fractogel EMD SE Hicap (M), Fractogel EMD COO- (M), MacroPrep 25S, MacroPrep High S, MacroPrep CM, CM HyperZ, and Matrex Cellufine C-500. Testing was done with three proteins: Anti-FVII Mab (IgG), aprotinin, and lysozyme. For lysozyme and aprotinin with pI above experimental pH, dependence of pH on retention was generally low, though some pronounced decrease of retention with increasing pH was observed for CM HyperZ. For Anti-FVII Mab with pI<7.5, binding was observed on several resins at pH 7.5. Efficiency results present the expected trend of increasing dependence of plate height as a function of increasing flow rate, and the highest flow dependence was observed for Fractogel EMD COO-. Particle size distribution was determined by two independent methods, coulter counting and SEM pictures, with fair agreement. Binding strength data of cation-exchange resins as a function of ionic strength depends on the protein, but binding and elution at high salt concentration may in general be performed with MacroPrep resins. Comparison of dynamic capacity data at 10% break-through and static capacity measurements shows that a very diverse utilization of approximately 25-90% of the total available capacity is employed during chromatographic operation. The effect of competitive binding from yeast fermentation components on dynamic binding capacity of aprotinin was studied showing a significant decrease in binding capacity. Sepharose FF, Toyopearl 650 M, and Ceramic HyperD F strong and weak cation-exchange resins were included in this study. Resins with good pure aprotinin capacity also performed well for aprotinin in fermentation broth, but the highest relative capacity was obtained with MacroPrep High S having a fairly low pure component dynamic capacity. Results of this paper may be used in the selection of resins for further testing in biopharmaceutical protein purification process development.

Radiotracer measurements of protein mass transfer: Kinetics in ion exchange media

We describe a method to measure protein mass transfer kinetics in ion exchange adsorbents for preparative chromatography based on the use of radioactively labeled protein. The method was developed and evaluated using lysozyme as a test protein with the three commercial strong-acid cation exchangers SP-Sepharose-FF, SP-Sepharose-XL, and S-HyperD. Iodination with 125I was used to label the protein, which was added in trace amounts (approximately 0.1%) to an unlabeled protein solution. The solution was recirculated through a shallow bed of the adsorbent particles and the radioactivity accumulated in the bed measured with a gamma-counter as a function of time. Radiotracer-based kinetics measurements were found to be in good agreement with results obtained with a conventional shallow-bed technique, provided that freshly labeled protein solutions were used. The method has advantages in terms of simplicity, ability to deal with adsorption from complex mixtures, and the potential for measurements under tracer diffusion conditions. Kinetics results obtained for the three different stationary phases were generally consistent with previous studies. Protein mass transfer can be described by a pore diffusion model with a nearly salt-independent pore diffusivity for SP-Sepharose-FF and by a homogeneous diffusion model with a saltindependent adsorbed phase diffusivity for S-HyperD. However, it appears that a more complex model, accounting for parallel pore and surface diffusion, is needed to describe protein mass transfer in SP-Sepharose-XL. The modeling results were found to be correlated with the apparent pore sizes determined by inverse SEC.

An exclusion mechanism in ion exchange chromatography

Protein dynamic binding capacities on ion exchange resins are typically expected to decrease with increasing conductivity and decreasing protein charge. There are, however, conditions where capacity increases with increasing conductivity and decreasing protein charge. Capacity measurements on two different commercial ion exchange resins with three different monoclonal antibodies at various pH and conductivities exhibited two domains. In the first domain, the capacity unexpectedly increased with increasing conductivity and decreasing protein charge. The second domain exhibited traditional behavior. A mechanism to explain the first domain is postulated; proteins initially bind to the outer pore regions and electrostatically hinder subsequent protein transport. Such a mechanism is supported by protein capacity and confocal microscopy studies whose results suggest how knowledge of the two types of IEX behavior can be leveraged in optimizing resins and processes.

Generic method for systematic phase selection and method development of biochromatographic processes

Even if the first protein therapeutics are now for more than 20 years on the market the selection of suitable adsorbents for the preparative downstream processing (DSP) of these biomolecules as well as the method development towards process conditions are still based mainly on 'trial and error'. Therefore, theses processes are not perfectly efficient, but indeed very time consuming and laborious. In this study a novel systematic method is introduced to find a suitable adsorbent (not necessarily the best one) with appropriate separation parameters for a specific separation with reduced effort. Following this strategy, the adsorbents must first be packed into columns under preparative conditions and then characterized completely with regard to, e.g. pressure drop, k'-values, plate heights (HETP curves), selectivity and capacity by using test substances, which are similar in their characteristics (molecular mass, size, charge distribution, hydrophobicity) to the target proteins. With the database once determined, a preselection of most suitable adsorbents including separation parameters is made regarding chromatographic and also economical properties. After this, preparative experiments must be conducted with a reduced number of adsorbents to figure out the individual influence of side components. This approach is demonstrated for the separation of an exemplary industrial protein mixture using cation-exchange chromatography (CEX). Characterization of different weak CEX-adsorbents is illustrated. After comparing these phases with each other, a first preselection and a prediction of suitable adsorbents is made. In the following preparative separation conditions (load, velocity, gradient) are determined for the preparative separations using the database and results of some additional experiments. The final comparison of separation performance in preparative scale confirms this selection and so the applicability of the new method.

Comparison of chromatographic ion-exchange resins

A comparative study was performed on heparin resins and strong and weak cation exchangers to investigate the pH dependence, efficiency, binding strength, particle size distribution, static and dynamic capacity, and scanning electron microscopy pictures of chromatographic resins. The resins tested include: Heparin Sepharose FF, SP Sepharose FF, CM Sepharose FF, Heparin Toyopearl 650 m, SP Toyopearl 650 m, CM Toyopearl 650 m, Ceramic Heparin HyperD M, Ceramic S HyperD 20, and Ceramic CM HyperD F. Testing was performed with four different proteins: anti-FVII Mab (IgG), aprotinin, lysozyme, and myoglobin. Dependence of pH on retention was generally very low for proteins with high isoelectric point (pI), though some decrease of retention with increasing pH was observed for CM Ceramic HyperD F and S Ceramic HyperD 20. Binding of anti-FVII Mab with pI < 7.5 was observed on several resins at pH 7.5. Efficiency results show the expected trend of increasing dependence of the plate height with increasing flow rate of Ceramic HyperD resins followed by Toyopearl 650 m resins and the highest flow dependence of the Sepharose FF resins corresponding to their pressure resistance. Determination of particle size distribution by two independent methods, coulter counting and SEM, was in good agreement. Binding strength of cation-exchange resins as a function of ionic strength varies depending on the protein. Binding and elution at high salt concentration may be performed with Ceramic HyperD resins, while binding and elution at low salt concentration may be performed with model proteins on heparin resins. Employing proteins with specific affinity for heparin, a much stronger binding is observed, however, some cation exchangers may still be good substitutions for heparin resins. Dynamic capacity at 10% breakthrough compared to static capacity measurements and dynamic capacity displays that approximately 40-80% of the total available capacity is utilized during chromatographic operation depending on flow rate. A general good agreement was obtained between results of this study and data obtained by others. Results of this study may be used in the selection of resins for testing during protein purification process development.

Effects of ionic strength on lysozyme uptake rates in cation exchangers. I: Uptake in SP Sepharose FF

Fluorescence scanning confocal microscopy was used in parallel with batch uptake and breakthrough measurements of transport rates to study the effect of ionic strength on the uptake of lysozyme into SP Sepharose FF. In all cases the adsorption isotherms were near-rectangular. As described previously, the intraparticle profiles changed from slow-moving self-sharpening fronts at low salt concentration, to fast-moving diffuse profiles at high salt concentration, and batch uptake rates correspondingly increased with increasing salt concentration. Shrinking core and homogeneous diffusion frameworks were used successfully to obtain effective diffusivities for the low salt and high salt conditions, respectively. The prediction of column breakthrough was generally good using these frameworks, except for low-salt uptake results. In those cases, the compressibility of the stationary phase coupled with the shrinking core behavior appears to reduce the mass transfer rates at particle-particle contacts, leading to shallower breakthrough curves. In contrast, the fast uptake rates at high ionic strength appear to reduce the importance of mass transfer limitations at the particle contacts, but the confocal results do show a flow rate dependence on the uptake profiles, suggesting that external mass transfer becomes more limiting at high ionic strength. These results show that the complexity of behavior observable at the microscopic scale is directly manifested at the column scale and provides a phenomenological basis to interpret and predict column breakthrough. In addition, the results provide heuristics for the optimization of chromatographic conditions.

Comparison of chromatographic ion-exchange resins

A comparative study was performed on strong cation-exchangers to investigate the pH dependence, efficiency, binding strength, particle size distribution, static and dynamic capacity, and SEM pictures of chromatographic resins. The resins tested included: SP Sepharose XL, Poros 50 HS, Toyopearl SP 550c, SP Sepharose BB, Source 30S, TSKGel SP-5PW-HR20, and Toyopearl SP 650c. Testing was performed with four different proteins: anti-FVII Mab (IgG), aprotinin, lysozyme, and myoglobin. Dependence of pH on retention was generally very low for proteins with high pI. An unexpected binding at pH 7.5 of anti-FVII Mab with pI < 7.5 was observed on several resins. Efficiency results show the expected trend of higher dependence of the plate height with increasing flow rate of soft resins compared to resins for medium and high-pressure operation. Determination of particle size distribution by two independent methods, Coulter counting and SEM, was in very good agreement. The mono-dispersed nature of Source 30S was confirmed. Binding to cation-exchange resins as a function of ionic strength varies depending on the specific protein. Generally, binding and elution at high salt concentration may be performed with Toyopearl SP 550c and Poros 50 HS, while binding and elution at low salt concentration may be performed with Toyopearl SP 650c. A very high binding capacity was obtained with SP Sepharose XL. Comparison of static capacity and dynamic capacity at 10% break-through shows in general approximately 50-80% utilisation of the total available capacity during chromatographic operation. A general good agreement was obtained between this study and data obtained by others. The results of this study may be used for selection of resins for testing in process development. The validity of experiments and results with model proteins were tested using human insulin precursor in pure state and in real feed-stock on Toyopearl SP 550c, SP Sepharose BB, and Toyopearl SP 650c. Results showed good agreement with experiments with model proteins.

Mechanism and kinetics of protein transport in chromatographic media studied by confocal laser scanning microscopy

An experimental study on the interplay of sorbent structure and fluid phase conditions (pH) has been carried out examining adsorption and transport of bovine serum albumin (BSA) and a monoclonal antibody (IgG 2a) on SP Sepharose Fast Flow and SP Sepharose XL. SP Sepharose Fast Flow is characterised by a relatively open pore network, while SP Sepharose XL is a composite structure with ligand-carrying dextran chains filling the pore space. Both adsorbents have similar ionic capacity. Protein transport and adsorption profiles were evaluated using confocal laser scanning microscopy. Under all investigated conditions, BSA uptake could be adequately explained by a pore diffusion mechanism. The adsorption profiles obtained for IgG 2a, however, indicated that changes in fluid phase conditions as well as a change in the solid phase structure could result in a more complex uptake mechanism as compared to pore diffusion alone. This mechanism results in a fast transport of proteins into the adsorbent, followed by an overshoot of protein in the center of the sorbent and a setback towards a homogeneous adsorption profile.

Direct observation of intraparticle equilibration and the rate-limiting step in adsorption of proteins in chromatographic adsorbents with confocal laser scanning microscopy

The adsorption of different proteins in a single biospecific and hydrophobic adsorbent particle for preparative protein chromatography has been observed directly by confocal laser scanning microscopy as a function of time at a constant bulk concentration c(b). The bulk concentration was in the non-linear part of the adsorption isotherm. At all times the concentration of free protein at the particle surface was almost equal to the bulk content indicating that external mass transfer resistance is not rate limiting for the adsorption under these conditions. Inside the particles a distinct maximum in adsorbed and free protein concentration that moved inside to a distance of approximately 0.2 R (R particle radius) from the particle surface, was observed. This is due to a decreasing solid-phase density and adsorptive capacity in the particle between 0.8 R and R indicating that the fraction of macropores (or void space) is larger in the outer than in the inner part of the adsorbent particles. By increasing the bulk concentration by a factor of 10 the equilibration time was reduced by about the same magnitude. This is in agreement with the concentration dependence of the effective pore diffusion coefficient D(p,eff)=D(p)/[epsilon(p)[1+nK/(K +c)(2)]] derived from the mass conservation relations describing the adsorption process. The time dependence protein adsorption up to approximately 90% of the equilibration value q* could be described by a bilinear free driving force model. The rapid equilibration in the outer part of the particle with a half-life time of approximately 100 s in the studied systems accounted for 0.3-0.4 q*. The slower equilibration with a up to ten times longer half-life time, was the adsorption in the inner part of the particle that outside 0.5 R accounts for 0.5-0.6 q*. These data were compared with literature data for batch adsorption of proteins in biospecific, hydrophobic and ion-exchange adsorbents. They could also be described by a bilinear free driving force model, with about the same quantitative results as obtained for similar conditions in the single particle experiments. The static adsorption parameters, maximum binding site concentration n, and dissociation constant for the protein binding to a binding site K, were determined from Scatchard plots. For the same protein-adsorbent system the plots changed from linear to non-linear with increasing n. This change occurred when the average distance between adjacent binding sites become of the same order of magnitude as the size of the binding site or adsorbed protein. This causes a shielding of free binding sites increasing with n and the concentration of adsorbed protein, yielding a concentration dependence in K. These results show that for a high throughput and rapid adsorption in preparative chromatography, the adsorption step should be carried out in the non-linear part of the adsorption isotherm with concentrations up to c(b) where q*/c(b)>/=10 to obtain high protein recoveries. To avoid tailing due to the flow of adsorbed proteins in the inner part of the particles further into the particles at the start of the desorption, and to speed up desorption rates, protein adsorption in the particle within 0.5 R from the particle center should be avoided. This requires the further development of suitable pellicular particles for preparative protein chromatography that meet this requirement.

Protein adsorption on novel acrylamido-based polymeric ion-exchangers. IV. Effects of protein size on adsorption capacity and rate

The effects of protein size on the adsorption capacity and rate is determined for an acrylamido-based polymeric anion-exchanger. The proteins lactalbumin, myoglobin, ovalbumin, BSA, conalbumin, IgG, and ferritin with molecular masses ranging from 15,000 to 450,000 were investigated. At high salt concentration (50 mM Tris-HCl containing 500 mM NaCl), only the smaller proteins lactalbumin and myoglobin gained access to a significant portion of the particle volume. The larger proteins were nearly completely excluded, in agreement with the results obtained for neutral macromolecules. By contrast, at low salt concentration (50 mM Tris-HCl), the adsorption capacity was very large (280-400 mg/ml of particle volume) for all the proteins studied except for ferritin, for which the capacity was much lower. This suggests that, provided the solute is not too large, the favorable electrostatic interaction overcomes the size exclusion effect. Adsorption rate measurements showed that mass transfer rates are also quite fast at low salt concentration. Effective diffusivities were determined by matching model and experimental results and were found to decrease substantially as the protein size increased. As previously observed, the homogeneous diffusion model was found to predict the experimentally observed trends with respect to protein concentration and boundary layer mass transfer effects.

Physico-chemical boundaries in the continuous and one-step discontinuous affinity-chromatographic isolation of proteins

From a physico-chemical point of view, affinity chromatography has no unambiguous definition. It is generally understood as the one-step chromatographic isolation of a protein from a biological sample. For such processes the protein recovery and the adsorption capacity for a given adsorption time is limited by static and dynamic physico-chemical properties of the system. The protein recovery is limited by the ratio of the static capacity, n(s), and the dissociation constant, K, for the interaction with the immobilized binding site. The limits of these quantities for 90% and 99% protein recovery were estimated. The residence time required to reach 90% of the adsorptive capacity of an adsorbent is a function of the above static properties, the pore-diffusion coefficient, D(p), and the diffusion distance in the adsorbent. It was estimated and was found to correlate well with experimental data. The one-step discontinuous or continuous chromatographic isolation of one protein from a biological sample by means of adsorbents that separate with respect to different properties is reviewed. This is only possible with selective specific adsorbents and, in special cases, also with bifunctional adsorbents that use hydrophobic interactions for the adsorption, and electrostatic repulsion for the desorption.