Effect of an acrylic intraocular lens with a sharp posterior optic edge on posterior capsule opacification

Long-term changes in the morphology of posterior capsule opacification

PURPOSE

To classify the morphologic appearance of posterior capsule opacification (PCO) and to observe and document the changes over longer periods of time.

SETTING

Department of Ophthalmology, Medical University of Vienna, Vienna, Austria.

METHODS

Eighty-one pseudophakic eyes of 53 patients with PCO of varying degrees were included in this prospective study. Digital retroillumination images of the posterior capsule were taken in a standardized fashion 1, 2, and 3 years after cataract surgery. The PCO morphology was classified, and changes among the 3 follow-up images were analyzed.

RESULTS

At 1, 2, and 3 years, pearls occurred in 16 (20%), 41 (51%), and 57 (63%) eyes. Pearls increased in size and number. Cases with thin layers of PCO decreased from 53 to 33 to 16 eyes. Conversely, cases with thick layers increased from 18 to 45 and 64 eyes. "Cheese holes" appeared most frequently as the predominant structure (range 47% to 51%), followed by plates (range 28% to 31%), islands (range 15% to 20%), and traces of PCO (range 1% to 5%). Changes in expansion of the PCO area were observed in 61 eyes (75%) during period 1 (1 to 2 years) and period 2 (2 to 3 years). Regions of expansion and regression in the same eye occurred in periods 1 and 2 in 11 eyes (14%) and 9 eyes (11%), respectively. The phenomenon of thinning bridges, a regression of syncytial extensions of PCO, occurred in 22 eyes (27%) and 32 eyes (40%), respectively. An overlapping growth of 2 layers was observed in 18 eyes (22%).

CONCLUSIONS

The morphology of PCO is multifaceted. Apart from the Elschnig pearls, categories such as cheese holes, plates, islands, and traces of PCO were distinguished. Over the years, pearls increased in frequency, size, and number. Expansion and regression occurred simultaneously in some cases. Two or more layers grew on top of each other in some eyes.

Daily changes in the morphology of Elschnig pearls

PURPOSE

To observe and document the daily changes in the morphology of Elschnig pearls.

DESIGN

A prospective cohort study.

METHODS

Twenty-nine pseudophakic eyes with pronounced, regeneratory posterior capsule opacification (PCO) were included in this prospective study. Retroillumination images were taken at days 0, 1, 2, and 14. A square grid was laid over the images. Increase, decrease, appearance, and disappearance of pearls between the follow-up images were quantified.

RESULTS

A total of 1371 areas (mean: 53/eye) of 26 eyes were analyzed between days 0 and 1 and 1 and 2, and 896 areas (50/eye) of 18 eyes between days 0 and 14. Between days 0 and 1, days 1 and 2, and days 0 and 14, we observed "no change" in pearl size in 72%, 77%, and 32%, a "minor increase" in 16%, 14%, and 10%, a "major increase" in 4%, 3%, and 42%, a "minor decrease" in 14%, 11%, and 11%, and a "major decrease" in 4%, 3%, and 37%, respectively. Appearance of newly formed pearls was found in 1%, 1%, and 9% and disappearance of pearls in 1%, 1%, and 5%, respectively.

CONCLUSIONS

Significant changes in the morphology of Elschnig pearls were observed within time intervals of only 24 hours. Appearance and disappearance of pearls, as well as progression and regression of pearls within these short intervals illustrate the dynamic behavior of regeneratory PCO. These findings may contribute to a better understanding of PCO and have implications on pharmaceutical interventions for PCO.

Posterior capsule opacification

PURPOSE OF REVIEW

This paper assesses the factors that contribute to the formation of an effective capsular bend as a deterrent to posterior capsule opacification. Its goal is to assist the practicing ophthalmologist in separating current understanding of this process from various working models previously proposed.

RECENT FINDINGS

While a square-edge design appreciably improves resistance to posterior capsule opacification, significant factors remain under the control of the surgeon. These factors combine to form the physical and psychological barrier of a capsular bend. Innovative digital imaging has shown lens epithelial cell migration, allowing for a more rapid assessment of posterior capsule opacification resistance. A three-piece intraocular lens allows for full 360 degree capsular bend formation surrounding the optic edge; some single-piece designs may inhibit capsular bend formation. Decreasing, but not eliminating, the surviving lens epithelial cell population may diminish capsular bend strength, which may decrease resistance to posterior capsule opacification in the face of a regenerating cortex. All demographic features of clear/refractive lens exchange suggest higher rates of posterior capsule opacification than with standard cataract surgery.

SUMMARY

The quality of capsular bend formation will determine how resistant an intraocular lens will be to posterior capsule opacification as a consequence of regenerating cortex. As refractive lens exchange and new accommodating intraocular lens designs become more popular, the problems of regenerating cortex will increase in magnitude.

Effect of hydrodissection alone and hydrodissection combined with rotation on lens epithelial cells

PURPOSE

To evaluate the impact of corticocleaving hydrodissection alone and hydrodissection combined with rotation on lens epithelial cells (LECs) and residual cortical fibers (RCFs).

SETTING

Iladevi Cataract and IOL Research Center, Ahmedabad, India.

METHODS

An experimental laboratory study of 20 fresh human cadaver eyes (10 pairs) was conducted. A single eye from each pair was assigned to the control group, in which no hydrodissection and no rotation were performed (control). The other eye was randomized to corticocleaving hydrodissection alone (Group 1) or corticocleaving hydrodissection with rotation (Group 2). Cataract extraction was standardized. Capsule polishing was omitted. Area of LEC loss (%) in the preequatorial zone (PZ) and equatorial zone (EZ) was calculated as: [Area of capsule without cells/Total area of capsule] x 100. Area of presence of RCFs (%) was calculated as: [Circumference of EZ of capsule with RCF/Total circumference of EZ of the capsule] x 100. The Mann-Whitney U and the Wilcoxon signed rank tests were applied.

RESULTS

In the control group, area of cell loss (%) was 3.9 +/- 3.2 in the PZ and 2.7 +/- 0.8 in the EZ; presence of RCFs (%) was 83.8 +/- 1.7. Area of LEC loss (%) in Groups 1 and 2 was 24.8 +/- 4.5 and 42.6 +/- 5.4 (P = .008) in the PZ and 22.4 +/- 2.1 and 54 +/- 2.5 (P = .008) in the EZ, respectively. Area of presence of RCFs (%) in Groups 1 and 2 was 34.2 +/- 3.7 and 23.7 +/- 3.7 (P = .008), respectively.

CONCLUSION

Corticocleaving hydrodissection combined with rotation removed significant quantities of LECs and RCFs.

Quantitative Nachstarevaluierung von Acrylat- und Silikonintraokularlinsen mit scharfem Kantendesign

BACKGROUND

At the Department of Ophthalmology, Heidelberg, Germany, posterior capsule opacification (PCO) of a silicone and an acrylic intraocular lens (IOL) with a sharp optic edge design was evaluated.

PATIENTS AND METHODS

In a prospective study either the AMO ClariFlex silicone IOL or the Sensar AR40e hydrophobic acrylic IOL were implanted in 47 patients following uneventful phacoemulsification. Mean patient age was 76.2+/-7.8 (ClariFlex) and 73.4+/-12.9 years (AR40e), respectively. The mean follow-up time was 19.7+/-5.34 in the ClariFlex and 21.9+/-1.89 months in the AR40e group. PCO development was evaluated postoperatively using the EPCO 2000 analysis software (scale 0-4). Areas of interest were the total IOL optic, the central 3-mm zone as well as the capsulorhexis.

RESULTS

In both groups, all patients achieved a BCVA of 20/32 (AR40e) and 20/25 (ClariFlex), respectively. There was a very low incidence of PCO development with a mean EPCO score of 0.07+/-0.2 (ClariFlex and 0.15+/-0.2 (AR40e). Within the 3-mm zone and the capsulorhexis, there was a tendency for even lower EPCO scores in both groups. We calculated a statistically significant difference for the two lens materials for all investigated IOL areas (Wilcoxon's test, p<0.05).

CONCLUSION

Both IOLs with a sharp edge design showed good functional results, a stable position in the capsular bag as well as a low incidence of PCO development. However, the silicone IOL showed statistically significantly lower PCO scores.

Evaluation of posterior capsule opacification using a new posterior view method in rabbits

PURPOSE

To introduce a new procedure for evaluating posterior capsule opacification (PCO) in rabbit eyes and to perform a comparative study of the single-piece and 3-piece acrylic intraocular lenses (IOLs) on PCO using the new evaluation method.

SETTING

Jinshikai Medical Foundation, Nishi Eye Hospital, Osaka, Japan.

METHODS

A single-piece or 3-piece acrylic IOL was implanted in 1 eye and the other in the contralateral eye of 5 rabbits. Three weeks after surgery, PCO was scored by Evaluation of Posterior Capsule Opacification (EPCO) in posterior view. Before the posterior view was photographed, the anterior capsule was removed from the whole optic area to eliminate disturbing anterior capsule opacification (ACO) for the PCO evaluation.

RESULTS

Posterior capsule opacification could be well observed and viewed in the posterior view so that it could be scored by EPCO without confusion with ACO. The mean PCO score of the single-piece and 3-piece acrylic IOLs was 3.12 +/- 0.19 and 2.41 +/- 0.70, respectively (P < .05 and P = .03, respectively).

CONCLUSION

The removal of ACO allowed scoring of PCO by EPCO in rabbit eyes. The single-piece acrylic IOL showed significantly more PCO than the 3-piece acrylic IOL at least 3 weeks after surgery in rabbits.

Long-term Effect of Sharp Optic Edges of a Polymethyl Methacrylate Intraocular Lens on Posterior Capsule Opacification

PURPOSE

To compare the posterior capsule opacification (PCO) inhibiting effect of a 3-piece polymethyl methacrylate (PMMA) intraocular lens (IOL) with a sharp optic edge design with that of the round-edged version of the same IOL during a 5-year period.

DESIGN

Randomized patient- and examiner-masked clinical trial with intraindividual comparison.

PARTICIPANTS

Thirty-two patients with bilateral age-related cataract (64 eyes).

METHODS

Each study patient had phacoemulsification cataract surgery in both eyes and received a sharp optic edge PMMA IOL in one eye and a round optic edge PMMA IOL in the fellow eye (both by Dr Schmidt in Germany). Follow-up examinations were at 1 week, 1 month, 1 year, 3 years, and 5 years. Digital retroillumination images were taken from each eye. The amount of posterior capsule opacification was assessed objectively by means of automated image analysis software (Automated Quantification of After-Cataract) at 1 year, 3 years, and 5 years after surgery.

MAIN OUTCOME MEASURE

Posterior capsule opacification score: 0-10.

RESULTS

The sharp optic edge IOL showed significantly less regeneratory and fibrotic PCO at 1 year, 3 years, and 5 years after surgery. The mean AQUA PCO score was 5.12 for the round-edge and 2.49 for the sharp-edge IOL (scale, 0-10; P<0.001) at 5 years. The mean difference among patients for the PCO score in the eye implanted with the sharp optic edge versus the score in the eye with the round optic edge was 2.83 at 5 years (95% confidence interval, 1.66-4.00). Due to the large number of neodymium:yttrium-aluminum-garnet laser capsulotomies that were performed (12 in the round-edge group and 4 in the sharp-edge group), there was no significant difference in visual acuity between both groups at any time point.

CONCLUSIONS

Compared with the round-edge version, the sharp optic edge design of a 3-piece PMMA IOL led to significantly less PCO at 1 year, 3 years, and 5 years after surgery. However, the sharp optic edge did not lead to complete PCO prevention during this follow-up period. This finding has implications for the design of PMMA IOLs used for cataract surgery, especially in the developing world.

Effect of anterior capsule polishing on posterior capsule opacification and neodymium:YAG capsulotomy rates: Three-year randomized trial

PURPOSE

To compare the long-term effect of extensive polishing and nonpolishing of the anterior lens capsule on posterior capsule opacification (PCO) and neodymium:YAG (Nd:YAG) capsulotomy rates.

SETTING

Department of Ophthalmology, Medical University of Vienna, Vienna, Austria.

METHODS

This prospective randomized bilateral double-masked study included 108 eyes of 54 consecutive patients with age-related cataract. Following phacoemulsification, 3-piece intraocular lenses (IOLs) with round-edged silicone optics were implanted. Patients received an Allergan SI-40 IOL with a truncated, round optic edge or a Domilens Silens6 IOL with a fully round optic edge. Patients were randomly assigned to have extensive anterior capsule polishing with the Menapace aspiration curette or no treatment in the first eye; the second eye received the opposite treatment. Digital retroillumination images were taken at 1 week, 1 year, and 3 years, and Nd:YAG capsulotomy rates were evaluated. Posterior capsule opacification was objectively scored using automated image analysis software (AQUA) or estimated based on clearly defined assumptions if a capsulotomy had been performed.

RESULTS

Thirty-nine patients (78 eyes) concluded the study. Three-year PCO scores after polishing did not differ significantly (P>.05). However, 21 polished eyes (53.8%) required Nd:YAG laser capsulotomy compared with 14 nonpolished eyes (35.9%). The mismatch between PCO scores and Nd:YAG rates resulted from a change in PCO morphology that is not detected by scoring methods based on retroillumination photography but is visually disturbing to patients.

CONCLUSIONS

Polishing the anterior capsule was effective in reducing fibrotic opacification but ineffective in reducing regeneratory opacification. Changes in regeneratory PCO morphology not picked up by retroillumination photography increased the need for Nd:YAG laser capsulotomy.

Influence of optic edge design, optic material, and haptic design on capsular bend configuration

PURPOSE

To assess and classify capsular bend configuration at the optic rim and its association with posterior capsule (PCO) and anterior capsule opacification (ACO) and capsulorhexis contraction with various intraocular lenses (IOLs).

SETTING

Department of Ophthalmology, Medical University of Vienna, Vienna, Austria.

METHODS

A total of 659 post-cataract surgery eyes of 370 patients from different prospective randomized studies were evaluated. All eyes had standardized phacoemulsification surgery with implantation of an IOL in the capsular bag. The IOLs had a sharp or round optic edge design and were made of silicone, acrylic, or poly(methyl methacrylate) optic materials. One year postoperatively, the configuration of the capsular bend at the optic rim was assessed at the slitlamp, and standardized slitlamp images of ACO and fibrotic PCO were taken. One week, 1 year, and 3 years postoperatively, digital retroillumination images were taken for objective quantification of regeneratory PCO and the capsulorhexis area. The outcome measures were the type of capsular bend configuration, ACO score (0% to 100%), regeneratory PCO score (0 to 10), fibrotic PCO score (0 to 3), and amount of capsulorhexis contraction (mm(2)).

RESULTS

Four main types of capsular bend configuration were classified: parallel, "Y," right angle, and wrapping. The right-angle type was observed in the most cases (52%). Eyes with a wrapping capsular bend configuration had significantly less PCO, more capsulorhexis contraction, and more ACO than eyes with the other configurations. Wrapping capsule configuration was seen most often (55%) in round-edged silicone IOLs that had a thin optic rim.

CONCLUSION

The design and material of IOLs influenced the long-term capsular bend configuration at the optic rim. The right-angle type was the most common capsular bend configuration. Intraocular lenses with silicone optic material and a thin optic rim caused a wrapping capsule configuration and resulted in more capsulorhexis contraction and ACO, but less PCO.

Posterior Capsule Opacification in the Presence of an Intraocular Lens with a Sharp versus Rounded Optic Edge

PURPOSE

To compare the degree of posterior capsule opacification (PCO) and visual function in eyes implanted with an acrylic intraocular lens (IOL) with a sharp posterior optic edge with that in eyes implanted with an IOL with a rounded optic edge.

DESIGN

Randomized clinical trial.

PARTICIPANTS

Seventy-five consecutive patients scheduled for bilateral phacoemulsification were assigned randomly to 1 of 2 groups. One group received an acrylic IOL with a sharp edge (Sensar AR40e, AMO, Santa Ana, CA) in the left eye and an acrylic IOL of the same optic material and loops but with a rounded-edge optic (Sensar AR40) in the right eye. The other group received the sharp-edged IOL in the right eye and the rounded-edge IOL in the left eye. Sixty-nine patients (92%) completed follow-up.

INTERVENTION

All patients underwent implantation of a sharp-edged IOL in 1 eye and a rounded-edge IOL in the fellow eye.

MAIN OUTCOME MEASURES

The PCO value of these patients was measured using the Scheimpflug videophotography system at 1, 3, 6, 12, 18, and 24 months after surgery. The incidence of eyes that required a neodymium:yttrium-aluminum-garnet (Nd:YAG) laser posterior capsulotomy was examined. Visual acuity and contrast sensitivity with and without a glare source also were evaluated.

RESULTS

The mean PCO value in the sharp-edge IOL group was significantly less than that in the rounded-edge IOL group throughout the follow-up period. The incidence of Nd:YAG capsulotomy also was significantly less in the sharp-edge group than in the rounded-edge group (P = 0.0095). No significant difference was found in mean visual acuity during the 24 months of follow-up. However, contrast visual acuity with and without glare was significantly better in the sharp-edge group than in the rounded-edge group at 24 months after surgery.

CONCLUSIONS

The degree of posterior capsule opacification in eyes with an acrylic IOL with a sharp posterior optic edge is significantly less than that in eyes with a rounded-edge IOL, and the sharp-edge optic led to better contrast sensitivity with and without glare.

[Influence of intraocular lens material and design on the development of posterior capsule opacification]

Based on the literature of 1999-2005, we attempted to clarify the influence of material and design of an intraocular lens (IOL) on the development of posterior capsule opacification (PCO) and identify the future problems to be solved. The sharp edge design of an IOL has significantly reduced PCO in recent years. Histopathological studies showed that a sharp capsular bend was formed at the sharp posterior optic edge, and the migration of lens epithelial cells was obviously inhibited at the site. Experimental and clinical studies suggest that the sharper the edge is, the sharper the capsular bend, and the greater the preventive effect, regardless of IOL material. The sharp capsule bend appears to represent a physical hindrance, which may induce contact inhibition of cell movement. How material participates in the preventive effect should be clarified in a future study. Thus, at the moment, the formation of capsular bend at the posterior optic edge appears to be the decisive criterion to evaluate the influence of IOL material and design on the development of PCO. Optimization of design and material of an IOL, which facilitates capsular bend formation as sharply and quickly as possible, may reduce PCO to a clinically negligible level.

Short-term changes in the morphology of posterior capsule opacification

PURPOSE

To observe and document posterior capsule opacification (PCO) growth in vivo over a short period of time (4 weeks).

SETTING

Department of Ophthalmology, Medical University of Vienna, Vienna, Austria.

METHODS

Fifteen eyes of pseudophakic patients with PCO of varying degrees were included in this prospective study. Digital retroillumination images were taken in a standardized fashion at 3 time points: 1 baseline image, a second image after 2 weeks, and a third image after 4 weeks. Thus, a 3-image series could be created for each eye. Additionally, sections of the posterior capsule with interesting structures were photographed with higher magnification and compared in supplementary image series. Morphologic changes in the PCO structure (eg, number and size of Elschnig pearls, total PCO area) were analyzed in the image series.

RESULTS

In all cases, significant changes could be observed between the 3 time points. In 71% of cases, some Elschnig pearls increased in size during the first 2 weeks and during weeks 3 and 4. In 73% of cases, however, there was a reduction a pearl size or even disappearance of some Elschnig pearls. The total PCO area did not change significantly during the 4-week period.

CONCLUSIONS

Development of (regeneratory) PCO is a very dynamic process that includes not only growth of preexisting structures and occurrence of new Elschnig pearls, but also reorganization and even disappearance of pearls within a short time period (2-4 weeks). The latter in particular is not well known but could be observed in the majority of cases in this study.

Long-term effect of optic edge design in an acrylic intraocular lens on posterior capsule opacification

PURPOSE

To compare the posterior capsule opacification (PCO) inhibiting effect of the sharp posterior optic edge design of the Sensar OptiEdge AR40e intraocular lens (IOL) with that of the double-round edge design of the Sensar AR40 IOL over a period of 3 years.

SETTING

Department of Ophthalmology, Medical University of Vienna, Vienna, Austria.

METHODS

Fifty-three patients with bilateral age-related cataract (106 eyes) were included in this randomized prospective bilateral patient- and examiner-masked clinical trial with intraindividual comparison. Each study patient had cataract surgery in both eyes and received a Sensar AR40 IOL (anterior and posterior round optic edges) in 1 eye and a Sensar OptiEdge AR40e IOL (round anterior and sharp posterior optic edge) in the other eye. Follow-up examinations were at 1 week, 1 and 6 months, and 1, 2, and 3 years. Digital retroillumination images were taken of each eye. The amount of PCO was assessed subjectively at the slitlamp and objectively using automated image-analysis software (AQUA) 1, 2, and 3 years after surgery.

RESULTS

The sharp-edged AR40e lens showed significantly less regeneratory and fibrotic PCO 1, 2, and 3 years after surgery. The mean AQUA PCO score was 2.18 for the AR40 and 1.00 for the AR40e lens after 1 year; 2.94 and 1.56 after 2 years, and estimated at 3.13 and 1.77, respectively, after 3 years (scale 0 to 10; P<.001). The neodymium:YAG laser capsulotomy rate was significantly higher in the AR40 group. The AR40e lens also led to less peripheral fibrotic PCO. There was no significant difference in complaints concerning edge glare between the groups.

CONCLUSION

Compared with the AR40 IOL, the sharp posterior optic edge design of the Sensar OptiEdge AR40e IOL led to significantly less PCO 1, 2, and 3 years postoperatively. In contrast with most past studies on PCO-preventative factors, this study varied only 1 parameter, namely the optic edge design, and the main outcome measure (PCO) was assessed with an objective image-analysis system.

Factors that influence the development of posterior capsule opacification with a polyacrylic intraocular lens

PURPOSE

To identify factors that contribute to posterior capsule opacification (PCO) after implantation of a 5.5 mm polyacrylic (IOL).

DESIGN

A retrospective analysis of a cohort of sequential images taken from the PCO database at St. Thomas' Hospital, London, to include all patients with an AcrySof MA30 lens and a 1-year retroillumination image.

METHODS

Records of age, gender, axial length, and PCO measurements using the POCO software system were available. Images were divided into those with greater or less than 10% PCO. The degree of rhexis-IOL contact was recorded in clock hours.

RESULTS

Images of 60 eyes were analyzed. Twenty-one eyes had more than 10% PCO. No correlation was found between PCO and age, gender, or axial length. Forty-eight eyes (80%) had some loss of rhexis-IOL contact. These eyes had increased PCO (P < .001) compared with eyes with complete IOL-rhexis contact. More PCO developed when the rhexis was partly on and partly off the IOL.

CONCLUSIONS

PCO is reduced when the rhexis is in complete contact with the anterior IOL surface. The failure to achieve this accounts for the majority of increased PCO seen in patients implanted with this IOL model. PCO formation is related to surgical technique as well as IOL design, and comparisons cannot be made between IOLs without taking this into consideration. These results support the trend to the use of larger optic IOLs to prevent PCO and also support the "capsule compression" theory of PCO prevention.

Posterior capsule opacification in rabbit eyes implanted with 1-piece and 3-piece hydrophobic acrylic intraocular lenses

PURPOSE

To evaluate the outcome of posterior capsule opacification (PCO) after implantation in rabbit eyes of currently available 3-piece and 1-piece hydrophobic acrylic intraocular lenses (IOLs) with square optic edges.

SETTING

John A. Moran Eye Center, University of Utah, Salt Lake City, Utah, USA.

METHODS

The 3-piece designs evaluated were the AR40e (Advanced Medical Optics Inc.) and the MA60AC (Alcon, Inc.); the 1-piece designs were the SA60AT and the SA30AT (Alcon, Inc.). Nine lenses of each type were implanted in a randomized manner by the same surgeon in 18 Dutch Belted pigmented rabbits. After a follow-up of 3 weeks, the rabbits were killed and analyses of the enucleated eyes were performed from the posterior or Miyake-Apple view. The intensity of central PCO, peripheral PCO, and Soemmering's ring formation was scored from 0 to 4. The area of Soemmering's ring formation was also scored from 0 to 4 based on the number of quadrants involved. Other parameters analyzed were capsulorhexis coverage of the IOL anterior surface, IOL centration, fixation, and presence of striae. Results from the posterior view were complemented by histopathologic evaluation of the eyes.

RESULTS

No statistically significant difference was found between the 4 groups of IOLs in the parameters analyzed from the posterior view. When cell ingrowth occurred with the 1-piece designs, causing peripheral and central PCO formation, it was more likely to start at the optic-haptic junctions, as observed during the clinical follow-up with slitlamp examination and confirmed by gross and histopathologic analyses of the enucleated eyes.

CONCLUSIONS

The square, truncated optic edge is the most important IOL design feature for PCO prevention. The optic-haptic junctions of the 1-piece designs appear to be sites where the barrier effect of the truncated optic edge is less effective.

Long-term efficacy of adding a sharp posterior optic edge to a three-piece silicone intraocular lens on capsule opacification: five-year results of a randomized study

PURPOSE

To compare the intensity of capsule opacification with the sharp and the round optic edge variant of an open-loop hydrophobic silicone intraocular lens (IOL).

DESIGN

Randomized, controlled, double-blind clinical trial with intraindividual comparison.

METHODS

Fifty-one patients with bilateral age-related cataract were included (102 eyes). Each patient had had cataract surgery in both eyes and received a Microsil IOL with a sharp optic edge design (model S) in one eye and a Microsil IOL with a round optic edge design (model R) in the fellow eye. Both IOLs had an identical haptic design (nonangulated polymethylmethacrylate) and silicone optic material. The patients were examined at the slit lamp, best-corrected visual acuity was assessed, and standardized high-resolution digital retroillumination images of the posterior capsule were taken 5 years after surgery. The intensity of regeneratory posterior capsule opacification (rPCO), fibrotic PCO (fPCO), and anterior capsule opacification (ACO) was assessed subjectively at the slit lamp, and of rPCO, objectively using automated image analysis software (AQUA). The need for an Nd:YAG laser capsulotomy (Nd:YAG-LCT) was noted.

RESULTS

The mean AQUA PCO score was 1.2 for the model S and 2.4 for the model R lens (P = .001). The model S lens also led to less peripheral fPCO (P = .003). Concerning ACO, there was no significant difference between both IOL groups (P = .72). Whereas no capsulotomy was required with the model S, four cases (16%) had been performed in the model R group.

CONCLUSION

Five years postoperatively, the sharp-edged silicone IOL showed less rPCO and fPCO than the round-edged IOL. However, regarding ACO, there was no significant difference between both IOL styles.

Effect of bag-in-the-lens implantation on posterior capsule opacification in human donor eyes and rabbit eyes

PURPOSE

To evaluate bag-in-the-lens implantation by studying the feasibility of implanting a new type of intraocular lens (IOL) and the occurrence of posterior capsule opacification (PCO) in human postmortem eyes and in eyes of living rabbits.

SETTING

Department of Ophthalmology, University of Antwerp, Belgium, and Netherlands Research Institute of Amsterdam, Amsterdam, The Netherlands.

METHODS

The IOL was implanted in 10 postmortem human donor eyes (in vitro study) and in 17 eyes of 10 rabbits (in vivo study). The postmortem capsular bags were cultured for 4 to 6 weeks, and the rabbits were killed 1 to 5 months after implantation. All capsular bags with the bag-in-the-lens were examined by light microscopy and scanning electron microscopy.

RESULTS

The IOL design was highly effective in restricting lens epithelial cell (LEC) proliferation in the remaining lens bag in human donor eyes and in rabbit eyes. In eyes in which the capsules were not positioned well within the groove of the IOL, LEC proliferation and PCO occurred.

CONCLUSION

Bag-in-the-lens implantation was highly effective in preventing PCO in vitro and in vivo provided the anterior and posterior capsules were secured properly in the peripheral groove of the IOL.

Comparison of the Long-term Clinical Results of Hydrophilic and Hydrophobic Acrylic Intraocular Lenses

This study was performed to compare the incidence of posterior capsular opacity (PCO) and refractive errors between hydrophilic (ACR6D, Corneal) and hydrophobic (MA60BM, AcrySof) acrylic intraocular lenses (IOLs) over a 3-year follow-up after phacoemulsification surgery. The patients with AcrySof implanted in one eye and Corneal in the other eye were categorized as Group 1 (n=28), while those with one or both eyes implanted with IOLs of the same kind were categorized as Group 2 (AcrySof, n=90; Corneal, n=95). Refractive errors were evaluated at 3 months and 3 years postoperatively. The incidence of visually significant PCO was investigated 3 years postoperatively. Postoperative refractive values at 3 months were not significantly different between the two groups. However, refractive values at 3 years were significantly different between two IOLs in both groups [AcrySof -0.37+/-0.43D, Corneal -0.62+/-0.58D in Group 1 (p=0.04); AcrySof -0.38+/-0.52, Corneal -0.68+/-0.54 in Group 2 (p<0.01)]. The incidence of visually significant PCO was 14% and 32% in Group 1, and 13% and 28% in Group 2, for the AcrySof and Corneal implants, respectively. The incidence of visually significant PCO of hydrophilic acrylic IOLs was higher than that of hydrophobic acrylic IOLs in the 3-year follow-up. The postoperative 3-year refractive value of Corneal showed myopic shift.

Effect of intraocular lenses on preventing posterior capsule opacification: design versus material

PURPOSE

To compare the preventive effect of 4 types of design- and material-matched intraocular lenses (IOLs) on posterior capsule opacification (PCO).

SETTING

Jinshikai Medical Foundation, Nishi Eye Hospital, Osaka, Japan.

METHODS

After phacoemulsification, 1 of 2 matched IOLs in 3 groups was implanted in 1 eye and the other IOL in the contralateral eye of 4 to 6 rabbits. Three weeks postoperatively, posterior view and histopathological evaluations were performed and the capsular bending effect and amount of PCO evaluated.

RESULTS

The capsular bending effect was similar between a sharp-edged acrylic IOL (Sensar 40e, AMO) and a sharp-edged silicone IOL (ClariFlex, AMO) and between the Sensar 40e IOL and a sharp-edged acrylic IOL (AcrySof, Alcon Laboratories). There was no significant difference between IOL types in the amount of PCO. The capsular bend effect was slightly better and the PCO amount slightly less with the ClariFlex IOL than with the round-edged silicone PhacoFlex II IOL (AMO).

CONCLUSIONS

There was no substantial difference in PCO prevention between IOLs with sharp posterior optic edges, regardless of the IOL's material composition. The anterior edge design appeared to have no preventive effect. These results confirm that a sharp posterior optic edge is the main factor in preventing PCO.

In vivo digital imaging of the square-edged barrier effect of a silicone intraocular lens

PURPOSE

To evaluate and compare by high-magnification digital photography the lens epithelial cell (LEC) response and capsule dynamics in vivo after implantation of a square-edged and a round-edged silicone intraocular lens (IOL) in a fellow-eye study.

SETTING

Private practice and Royal Victoria Hospital, Barrie, and Soldiers' Memorial Hospital, Orillia, Ontario, Canada.

METHODS

After phacoemulsification, a single surgeon implanted a square-edged silicone IOL (SoFlex SE, Bausch & Lomb) in 25 patients who had previously had a conventional round-edged version of the same IOL (SoFlex Li61U, Bausch & Lomb) implanted in their contralateral eye within a 6-week period. SoFlex SE IOL recipients were selected sequentially from those scheduled for surgery within a 3-day period. The IOLs were sequentially photographed 1 week and 1, 3, 6, and 9 months after surgery using magnification of at least x64 through a biomicroscope and a high-resolution digital camera with adapter. Images were transferred to a graphics computer and compared over time.

RESULTS

At 1 week, both designs had evidence of LEC migration along the posterior capsule, with the highest cell density around the 6 o'clock position. At 1 month, both IOL designs showed 360 degrees of anterior and posterior capsule adhesion to the edge of the optic. At 1 month, however, migrating LECs encountered a "damming" effect at the square posterior edge but not at the round edge. A thin fibrotic ring began to form around the SoFlex SE edge at 2 months and was complete for 360 degrees at 3 months. At 9 months, there was no evidence of LEC migration beyond this ring. With round-edged IOLs, the fibrotic ring never fully formed and LEC migration continued posterior to the optic. There was a tight capsule shrink-wrap effect with the square-edged IOLs with the fibrotic ring, allowing minimal IOL movement between 1 month and 9 months. The round-edged IOLs tended to decenter and rotate. Anterior capsulorhexis contraction was greater at every time point with the round-edged IOLs than with the square-edged IOLs.

CONCLUSION

Early contact inhibition of LECs by a square-edged IOL design and its effects were demonstrated in vivo with sequential, high-resolution digital photography and commercially available graphics software.

Posterior capsule opacification in rabbit eyes implanted with hydrophilic acrylic intraocular lenses with enhanced square edge

PURPOSE

To evaluate the development of posterior capsule opacification (PCO) after implantation of single-piece hydrophilic acrylic intraocular lenses (IOLs) with an enhanced square edge.

SETTING

John A. Moran Eye Center, University of Utah, Salt Lake City, Utah, USA.

METHODS

The standard 570H Centerflex (Rayner Ltd.) design was compared to 2 new designs with enhanced square edges: the 570E and the 570C. Ten IOLs of each type were implanted in a randomized manner by the same surgeon in 15 pigmented rabbits. After a follow-up of 3 weeks, the rabbits were killed and the eyes were analyzed from the posterior view. The intensity of central PCO, peripheral PCO, and Soemmering's ring formation was graded from 0 to 4. The area of Soemmering's ring was graded from 0 to 4 based on the number of quadrants involved. Other parameters analyzed were capsulorhexis coverage of the IOL edge and IOL centration and fixation. Results from the posterior view were complemented by histopathological evaluation.

RESULTS

Posterior capsule opacification was lowest in the 570C group, highest in the 570H group, and intermediate in the 570E group. There was a statistically significant difference between the 3 groups in peripheral PCO (P = .039). No significant difference was found between the groups in the other parameters analyzed. When cell ingrowth occurred with the 570H, it started at the optic-haptic junctions, as observed during the clinical follow-up and confirmed by gross and histopathological analyses.

CONCLUSIONS

The square optic edge is the most important IOL design feature for PCO prevention. However, it should be present for 360 degrees around the IOL optic to provide an effective barrier effect.

Comparison of posterior capsule opacification between the 1-piece and 3-piece Acrysof intraocular lenses: two-year results of a randomized trial

PURPOSE

To compare intensity of posterior capsule opacification (PCO) between the 1-piece and 3-piece haptic designs of an open-loop hydrophobic acrylic intraocular lens (IOL).

DESIGN

A randomized, patient- and examiner-masked clinical trial with intraindividual comparison.

PARTICIPANTS

Fifty-two patients with bilateral age-related cataract (104 eyes).

METHODS

Each patient had cataract surgery in both eyes and received a 1-piece Acrysof IOL in one eye and a 3-piece Acrysof IOL in the fellow eye. Follow-up examinations were at 1 week, 1 month, 6 months, 1 year, and 2 years. Patients were examined at the slit lamp, visual acuity (VA) was determined, and standardized high-resolution digital retroillumination images of the posterior capsule were taken. The intensity of PCO was assessed subjectively at the slit lamp and objectively using automated image analysis software.

MAIN OUTCOME MEASURE

Posterior capsule opacification score (scale, 0-10).

RESULTS

There was no significant difference between IOL styles in best-corrected VA, rhexis/IOL overlap, capsular folds, and amount of anterior capsule opacification during the follow-up period. One year postoperatively, the amount of regeneratory PCO was higher for the 1-piece Acrysof eyes (image analysis software score: 1.3) than for the 3-piece Acrysof eyes (score: 0.9; P = 0.002). However, 2 years postoperatively, there was no significant difference between the 2 IOL styles (1-piece: 1.5; 3-piece: 1.3; P = 0.3). Neodymium:yttrium-aluminum-garnet capsulotomy was not performed in the study.

CONCLUSION

One year postoperatively, the 1-piece Acrysof showed slightly more regeneratory PCO than the 3-piece Acrysof. However, 2 years postoperatively, the barrier effect of the 1-piece design was comparable to that of the 3-piece haptic design, with low PCO intensity.

Evaluation of a human capsular bag model for secondary cataract determination after intraocular lens implantation

PURPOSE

To investigate the effect of different intraocular lenses (IOLs) on lens epithelial cells (LECs) and on human capsular bags in vitro and to evaluate the transferability of this model to clinical situations.

METHODS

Sham cataract surgery, including IOL-into-the-bag implantation, was performed on 38 donor eyes after removal of the cornea. The capsular bag including the IOL was removed, pinned on a culture dish, covered with medium, and incubated. Two different IOLs were compared per pair of donor eyes. In each pair of donor eyes, the two different IOLs to be compared were implanted individually into capsular bags. The time required for complete coverage of the posterior capsule by a confluent monolayer of LECs was documented. The following IOLs were compared: three-piece acrylic IOLs of different sizes and single-piece polymethylmethacrylate (PMMA) versus acrylic IOLs.

RESULTS

A complete monolayer of LECs on the posterior capsule was observed to form at times varying from 8 days (PMMA IOLs) to more than 60 days (three-piece hydrophobic acrylic IOLs). A significant difference between PMMA IOLs and hydrophobic acrylic IOLs was found.

CONCLUSIONS

The human capsular bag model employed allows short-term evaluation of secondary cataract formation for different IOLs. This model's correlation with clinical results is good.

Effect of a silicone intraocular lens with a sharp posterior optic edge on posterior capsule opacification

PURPOSE

To compare the inhibiting effect on posterior capsule opacification (PCO) of a silicone intraocular lens (IOL) with a sharp posterior optic edge (ClariFlex OptiEdge, Advanced Medical Optics) and a silicone IOL with a round optic edge (PhacoFlex SI-40, Advanced Medical Optics).

SETTING

Department of Ophthalmology, University of Vienna, Vienna, Austria.

METHODS

This prospective randomized patient- and examiner-masked study comprised 104 eyes of 52 patients with bilateral age-related cataract. All patients had cataract surgery in both eyes and received a sharp-edged IOL in 1 eye and a round-edged IOL in the other eye. Postoperative examinations were at 1 week, 1 and 6 months, and 1 year. Digital slitlamp and retroillumination images were taken of each eye. The amount of PCO was assessed subjectively at the slitlamp and objectively using Automated Quantification of After-Cataract (AQUA) automated-image analysis software.

RESULTS

The sharp-edged IOL group had significantly less regeneratory and fibrotic PCO 1 month, 6 months, and 1 year after surgery. The mean AQUA PCO score (scale 0 to 10) was 0.71 in the sharp-edged IOL group and 1.40 in the round-edged IOL group (P<.001). The sharp-edged IOL group had less peripheral fibrotic PCO. There was no significant difference between the 2 IOL groups in patient reports of edge glare.

CONCLUSION

The sharp-edged design of the ClariFlex OptiEdge silicone IOL led to significantly less PCO than the round-edged PhacoFlex SI-40 IOL 1 year postoperatively.

Uveal and capsular biocompatibility of a single-piece, sharp-edged hydrophilic acrylic intraocular lens with collagen (Collamer): 1-year results

PURPOSE

To analyze uveal and capsular biocompatibility 1 year following implantation of a sharp-edged, hydrophilic, collagen-containing posterior chamber intraocular lens (IOL).

SETTING

Department of Ophthalmology, University of Vienna Medical School, Vienna, Austria.

METHOD

In a prospective study, a Collamer CC4204BF IOL was implanted in 30 eyes of patients with senile cataract. A standardized surgical technique and postoperative regimen were applied. To assess uveal biocompatibility, cellular inflammation on the anterior IOL surface was evaluated with a specular microscope. Capsular biocompatibility was registered semiquantitatively with a biomicroscope, based on an assessment of fibrosis on the anterior and posterior capsules. Tyndall values were measured with the Kowa FC-1000 laser flare-cell meter. Decentration of the lens was also registered.

RESULTS

One year after implantation, the values of flare and cell count in the anterior chamber were lower than preoperatively. Round and spindle-shaped, epithelioid, and foreign-body giant cells were not found on the anterior surface of the IOL. The capsulorhexis rim was moderately fibrosed in 56.6% of cases. Fibrosis of the capsule over the optic was also moderate in 36.6%. The central portion of the posterior capsule was devoid of fibrosis in 43.3% and mildly fibrosed in 50%. Three lenses revealed outgrowth of lens epithelial cells to the anterior surface of the IOL. A neodymium:YAG capsulotomy had to be performed in 1 case. All lenses were well centered in the capsular bag 1 year after implantation.

CONCLUSIONS

The absence of inflammatory cells on the anterior surface of the IOL indicates the high uveal biocompatibility of the lens. In terms of capsular biocompatibility, the results were satisfactory.

Analysis of stray-light effects related to intraocular lens edge design

PURPOSE

To study the behavior of light rays that impact the frosted, double-square edge of an intraocular lens (IOL).

SETTING

Optical Phisiophatological Department, University of Florence, Florence, Italy.

METHODS

The interaction of light rays as a function of the edge design of a frosted, sharp-edged IOL was evaluated using an experimental eye model and an advanced ray-tracing program. The model simulates the irregularities of the frosted edge by the random overlap of sinusoidal phase gratings that have a random phase, an orientation, and a fixed period.

RESULTS

The reduction in the maximum intensity of the ghost image by frosting the square edge was linked to the period of the microroughness. At a maximum microroughness, when the period is less than 5 microm, the reduction in the value of an unfrosted, square-edged IOL was 17.5%.

CONCLUSIONS

The frosted edge had a small impact on reducing the intensity of the ghost image caused by the reflection of light from the double square edge of the IOL. Furthermore, in optics, the stray light from microroughness is generally considered to be a drawback because it can decrease contrast sensitivity.

Neodymium:YAG laser posterior capsulotomy after implantation of AcrySof intraocular lenses

PURPOSE

To report the incidence of neodymium:YAG (Nd:YAG) laser posterior capsulotomy after phacoemulsification and implantation of AcrySof (Alcon) intraocular lenses (IOLs).

SETTING

Private practice, Wolfe Clinic, Marshalltown, Iowa, USA.

METHODS

A retrospective diagnosis and procedure code review of 12419 consecutive cases having phacoemulsification and AcrySof IOL implantation from January 1995 through December 2002 was performed. The outcome parameter was the incidence of Nd:YAG laser posterior capsulotomies.

RESULTS

An Nd:YAG laser posterior capsulotomy was performed in 763 (6.1%) of the 12419 cases. The incidence of posterior capsulotomy was approximately 1% at 1 year, increasing in linear fashion by approximately 1% to 2% per year.

CONCLUSIONS

The Nd:YAG laser posterior capsulotomy rate after implantation of AcrySof IOLs was relatively low; the cumulative rate was approximately 1% to 2% new cases per year over a 7-year period, with a plateau suggested at year 6.

Anterior capsule relationship of the AcryS of intraocular lens optic and posterior capsule opacification

OBJECTIVE

To evaluate the relationship of the anterior capsule and the AcrySof MA30BA intraocular lens (IOL) and its impact on the development of central posterior capsule opacification (PCO).

DESIGN

Prospective, randomized, controlled trial.

PARTICIPANTS

Two hundred two patients with senile cataracts received an AcrySof IOL between July and December 1998 at Iladevi Cataract and IOL Research Center, Ahmedabad, India.

INTERVENTION

Patients were randomized prospectively to receive 1 of the 3 possibilities of anterior capsule and IOL optic relationship: group 1, total anterior capsule cover (360 degrees ) of the optic; group 2, no anterior capsule cover (360 degrees ) of the optic; group 3, partial anterior capsule cover (<360 degrees ) of the optic. After surgery, slit-lamp video photography was performed every 6 months for 3 years. Analyses of variance and chi-square tests were used to compare treatment groups.

MAIN OUTCOME MEASURES

Incidence of PCO in the 3 groups. The posterior capsule was divided into 3 zones: peripheral, central 3 mm, and midperipheral (the space between the peripheral and the central zones).

RESULTS

The average follow-up was 35.3 +/- 1.52 months in all the groups. At 3 years, the rate of central PCO was 6.4% in group 1, 7.1% in group 2, and 5.9% in group 3 (P = 0.9). Midperipheral PCO was present in 24.2% in group 1, 16% in group 2, and 20.6% in group 3 (P = 0.9). Peripheral PCO was seen in 100% of patients in all groups. The neodynium:yttrium-aluminum-garnet laser (Nd:YAG) posterior capsulotomy rate was 0% in all groups.

CONCLUSIONS

There was no significant difference in the incidence of development of central PCO among the 3 groups. No patient experienced central PCO that required Nd:YAG capsulotomy. When using the AcrySof IOL model MA30BA, the relationship of the anterior capsule and the IOL does not seem to be a factor that relates to the development of central PCO.

Influence of optic edge design and anterior capsule polishing on posterior capsule fibrosis

PURPOSE

To evaluate the role of posterior optic edge design and the effect of anterior capsule polishing on peripheral fibrotic posterior capsule opacification (PCO).

SETTING

Department of Ophthalmology, University of Vienna, Vienna, Austria.

METHODS

This randomized prospective study comprised 144 eyes of 72 patients with bilateral age-related cataract. Each patient had standardized cataract surgery in both eyes by the same surgeon. Group 1 (46 patients) received a round-edged hydrophobic acrylic IOL (AMO Sensar AR40) in 1 eye and a sharp-edged hydrophobic acrylic IOL (AMO Sensar OptiEdge AR40e) in the other eye. Group 2 (26 patients) received a silicone IOL (Pharmacia CeeOn 911A) with a truncated optic in both eyes. In this group, the anterior capsule was extensively polished in 1 eye and was left unpolished in the other eye. Digital slitlamp photographs were taken 1 year postoperatively using a standardized photographic technique for fibrotic PCO. The intensity of PCO was subjectively graded (score 0 to 4) by 2 masked examiners.

RESULTS

Subjective PCO scores correlated well between the 2 examiners (r = 0.88). In Group 1, the mean PCO score was 0.26 for the OptiEdge AR40e IOL and 0.90 for the AR40 IOL (P<.01). In Group 2, the mean PCO score was 0.24 in eyes with a polished capsule and 0.17 in eyes in which the capsule was not polished (P =.31).

CONCLUSIONS

The sharp-edged OptiEdge AR40e IOL led to significantly less peripheral fibrotic PCO 1 year postoperatively than the round-edged AR40 IOL. In eyes with the sharp-edged silicone 911A IOL, anterior capsule polishing caused no significant difference in fibrotic PCO.

Posterior capsule opacification after implantation of a hydrogel intraocular lens

AIM

To compare the degree of posterior capsule opacification (PCO) in eyes with a hydrophilic hydrogel intraocular lens (IOL) with that in eyes with a hydrophobic acrylic IOL.

METHODS

Ninety five patients underwent a hydrogel IOL implantation in one eye and an acrylic IOL implantation in the opposite eye. The PCO value of these patients was measured using the Scheimpflug videophotography system at 1, 6, 12, 18, and 24 months postoperatively. The rate of neodymium:YAG (Nd:YAG) laser posterior capsulotomy and visual acuity were also evaluated.

RESULTS

The mean PCO value in the hydrogel group increased significantly (p<0.0001), while that in the acrylic group did not show significant change. The PCO value in the hydrogel group was significantly greater than that in the acrylic group throughout the follow up period. Kaplan-Meier survival analysis determined that the Nd:YAG capsulotomy rate in the hydrogel group was significantly higher than that in the acrylic group (p<0.0001). Mean visual acuity in the hydrogel group decreased significantly with time (p<0.0001), and became significantly worse than that in the acrylic group at 18 and 24 months postoperatively.

CONCLUSION

Posterior capsule opacification in eyes with a hydrophilic hydrogel IOL is significantly more extensive than that in eyes with a hydrophobic acrylic IOL, and results in a significant impairment of visual acuity.

Effect of optic edge design and haptic angulation on postoperative intraocular lens position change

PURPOSE

To assess the effect of optic edge design and optic-haptic angulation of open-loop intraocular lenses (IOLs) on postoperative axial movement and the final position of the optic by measuring the anterior chamber depth (ACD) during the first postoperative year using partial coherence interferometry (PCI).

SETTING

Department of Ophthalmology, Vienna General Hospital, Institute of Medical Physics, University of Vienna, Vienna, Austria.

METHODS

In study 1, a 3-piece silicone IOL with nonangulated modified C-loop haptics (MicroSil, Dr. Schmidt) was implanted in 78 eyes of 39 patients; patients were randomized to receive a round-edged optic IOL in 1 eye and a sharp-edged optic IOL in the other eye. The ACD was measured by PCI 1 day, 1 week, 3 months, and 1 year after surgery. In study 2, a foldable, 3-piece acrylic IOL with modified 10-degree angulated J-loop haptics (AcrySof MA60BM, Alcon) was implanted in 32 eyes of 32 patients. The ACD was measured by PCI 1 day, 1 week, and 3 months after surgery.

RESULTS

In eyes with a nonangulated silicone IOL, there was a significant postoperative change in ACD with both sharp-edged and round-edged designs (P<.01). There was forward movement of both IOL designs in the first week, with no significant difference between the 2 models. From 1 week to 3 months, there was backward movement of IOLs of both designs, with the sharp-edged IOL moving a significantly greater amount (P<.001). From 3 months to 1 year, IOLs with both optic edge designs moved slightly backward. Sixty-six percent of angulated IOLs showed continuous but variable forward movement and 34%, backward movement.

CONCLUSIONS

Optic edge design influenced postoperative axial optic movement and thus had an impact on the development of postoperative refraction (refractive shift, deviation from target refraction). The influence of optic-haptic angulation proved to be significantly greater and more variable than edge design.

Preventive effect of a second-generation silicone intraocular lens on posterior capsule opacification

PURPOSE

To compare the preventive effect of a second-generation silicone intraocular lens (IOL) on posterior capsule opacification (PCO) with that of a soft acrylic IOL.

SETTING

Jinshikai Medical Foundation, Nishi Eye Hospital, Osaka, Japan.

METHODS

After phacoemulsification, a silicone IOL (PhacoFlex II) was implanted in 1 eye and an acrylic IOL (AcrySof) in the contralateral eye of 5 rabbits.

RESULTS

The posterior view 3 weeks after surgery showed slightly more PCO in 3 eyes with the PhacoFlex II lens than in eyes with the AcrySof IOL, with the PCO obscuring the iris structures. In 2 eyes with an AcrySof IOL, slightly more PCO was seen. Histopathological examination revealed that a bend and complex folds in the posterior capsule were formed with both the PhacoFlex II and AcrySof IOLs. However, the capsular bend formed by the PhacoFlex II lens, which was caused by its blunt edge, was not as sharp as that with the AcrySof IOL and more PCO was seen in all eyes with a PhacoFlex II lens.

CONCLUSIONS

Capsular bend formation does not necessarily require a sharp optic edge. A truncated optic rim of a certain thickness appears to form a bend. The capsule-bending does not appear to be an all-or-nothing effect. There seems to be a transition. That a capsular bend forms despite a blunt rather than a sharp optic edge may explain why the second-generation PhacoFlex II IOL prevents PCO better than first-generation and PMMA IOLs.