Immobilization of glucoamylase onto spacer-arm attached magnetic poly(methylmethacrylate) microspheres: characterization and application to a continuous flow reactor

Biodiesel production from sunflower, soybean, and waste cooking oils by transesterification using lipase immobilized onto a novel microporous polymer

This study aims at carrying out lipase-catalyzed synthesis of fatty acid methyl esters (biodiesel) from various vegetable oils using lipase immobilized onto a novel microporous polymeric matrix (MPPM) as a low-cost biocatalyst. The research is focused on three aspects of the process: (a) MPPM synthesis (monolithic, bead, and powder forms), (b) microporous polymeric biocatalyst (MPPB) preparation by immobilization of lipase onto MPPM, and (c) biodiesel production by MPPB. Experimental planning of each step of the study was separately carried out in accordance with design of experiment (DoE) based on Taguchi methodology. Microporous polymeric matrix (MPPM) containing aldehyde functional group was synthesized by polyHIPE technique using styrene, divinylbenzene, and polyglutaraldehyde. Thermomyces lanuginosus lipase was covalently attached onto MPPM with 80%, 85%, and 89% immobilization efficiencies using bead, powder, and monolithic forms, respectively. Immobilized enzymes were successfully used for the production of biodiesel using sunflower, soybean, and waste cooking oils. It was shown that immobilized enzymes retain their activities during 10 repeated batch reactions at 25 degrees C, each lasting 24h. Since the developed novel method is simple yet effective, it could have a potential to be used industrially for the production of chemicals requiring immobilized lipases.

Synthesis of a mesoporous functional copolymer bead carrier and its properties for glucoamylase immobilization

A series of mesoporous and hydrophilic novel bead carriers containing epoxy groups were synthesized by modified inverse suspension polymerization. Glycidyl methacrylate and acryloyloxyethyl trimethyl ammonium chloride were used as the monomers, and divinyl benzene, allyl methacrylate, and ethylene glycol dimethacrylate as crosslinking agents, respectively. The resulting carriers were employed in the immobilization of glucoamylase (Glu) with covalent bond between epoxy groups and enzymes. The activity recovery of the three series of immobilized Glus could reach 76%, 79%, and 86%, respectively. The immobilized Glus exhibit excellent stability and reusability than that of the free ones.

Improving immunobinding using oriented immobilization of an oxidized antibody

Recent technical advances in biorecognition engineering and microparticle fabrication enabled us to develop a single-step purification process using magnetic particles (MPs). The process is simple, efficacious, easy to automate, and economical. The method immobilizes the ligand molecule in a particular orientation on commercial MPs that have surface carboxyl groups. Mouse IgG and anti-mouse IgG antibody were the model capture and ligand molecules for this study. The immunobinding efficacy of anti-mouse IgG antibody using "oriented immobilization" was compared with the efficacy of a conventional amine-coupling system that results in random orientation and of another standard method, the biotin-streptavidin system. The oriented immobilization was accomplished by oxidizing the sugar moiety in the CH(2) domain of the antibody's Fc and covalently conjugating the moiety to the hydrazine-coated MP. The specific binding affinity of the oriented immobilization process was about 2.5 times that of the amine-coupling system, and selectivity from a binary mixture was about 2 times greater for the oriented immobilization method. Results were nearly identical for the biotin-streptavidin system and the oriented immobilization system, matching the calculated binding stoichiometry between mouse IgG and anti-mouse IgG antibody. The binding improvement over the amine-coupling system shown by assay was confirmed by a separate surface plasmon resonance experiment. In summary, the oriented immobilization method was as effective as the streptavidin-biotin system, yet simpler and cost-effective.

Kinetics of mercury ions removal from synthetic aqueous solutions using by novel magnetic p(GMA-MMA-EGDMA) beads

Poly(glycidylmethacrylate-methylmethacrylate), p(GMA-MMA-EGDMA), magnetic beads were prepared via suspension polymerization in the presence of ferric ions. The epoxy groups of the beads were converted into amino groups via ring opening reaction of the ammonia and, the aminated magnetic beads were used for the removal of Hg(II) ions from aqueous solution in a batch experiment and in a magnetically stabilized fluidized bed reactor (MFB). The magnetic p(GMA-MMA-EGDMA) beads were characterized with scanning electron microscope (SEM), FT-IR and ESR spectrophotometers. The optimum removal of Hg(II) ions was observed at pH 5.5. The maximum adsorption capacity of Hg(II) ions by using the magnetic beads was 124.8+/-2.1 mgg(-1) beads. In the continuous MFB reactor, Hg(II) ions adsorption capacity of the magnetic beads decreased with an increase in the flow-rate. The maximum adsorption capacity of the magnetic beads in the MFB reactor was 139.4+/-1.4 mgg(-1). The results indicate that the magnetic beads are promising for use in MFB for removal of Hg(II) ions from aqueous solution and/or waste water treatment.

Magnetite nanoparticles with tunable gold or silver shell

Fe3O4 nanoparticles with size approximately 13 nm have been prepared successfully in aqueous micellar medium at approximately 80 degrees C. To make Fe3O4 nanoparticles resistant to surface poisoning a new route is developed for coating Fe3O4 nanoparticles with noble metals such as gold or silver as shell. The shell thickness of the core-shell particles becomes tunable through the adjustment of the ratio of the constituents. Thus, the route yields well-defined core-shell structures of size from 18 to 30 nm with varying proportion of Fe3O4 to the noble metal precursor salts. These magnetic nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), FTIR, differential scanning calorimetry (DSC), Raman and temperature-dependent magnetic studies.

Silica-Encapsulated Nanomagnetic Particle as a New Recoverable Biocatalyst Carrier

Enzymes are versatile biocatalysts with major advantages of ultrahigh reaction selectivity and specificity under mild conditions, which currently find increasing applications. However, their applications are often hampered by difficulties in recovery and recycling. As a result, we carried out detailed investigations on the synthesis and characterization of silica-encapsulated iron oxide magnetic nanoparticles of controlled dimension as an enzyme carrier. It is shown that the relatively smaller sized silica-coated magnetic nanoparticle prepared by the microemlusion technique can a carry bulky enzyme, beta-lactamase, via chemical linkages on the silica overlayer without severely blocking the enzymatic active center (which is commonly encountered in conventional solid supports). An activity study by Michalis-Menten kinetics reflects that this new type of immobilization allows enzyme isolation with accessibility as good as free enzyme. The recovery and reusability of the nanoparticle-supported enzyme upon application of magnetic separation are also demonstrated.

Synthesis of tentacle type magnetic beads as immobilized metal chelate affinity support for cytochrome c adsorption

Magnetic poly(2-hydroxyethylmethacrylate) (mPHEMA) beads with an average diameter of 100-140 microm were produced by suspension polymerization in the presence of magnetite particles (i.e. Fe3O4). Specific surface area and average pore size of the magnetic beads was found to be 50 m2/g and 819 nm, respectively. Ester groups in the mPHEMA structure were converted to imine groups by reacting with poly(ethyleneimine) (PEI) in the presence of NaH. Amino (-NH2) content of PEI-attached mPHEMA beads was determined as 102 mg PEI/g. Then, Cu2+ ions were chelated on the magnetic beads in the range of 20-793 micromol Cu2+/g. Cytochrome c (cyt c) adsorption was performed on the metal chelating beads from aqueous solutions containing different amounts of cyt c at different pHs, Cu2+ loadings and temperatures. Cyt c adsorption on the mPHEMA/PEI beads was 4.6 mg/g. Cu2+ chelation increased the cyt c adsorption significantly (40.1 mg/g). Adsorption capacity increased with Cu2+ loading and then reached a saturation value. Cyt c adsorption decreased with increasing temperature. Cyt c molecules could be reversibly adsorbed and eluted ten times with the magnetic adsorbents without noticeable loss in their cyt c adsorption capacity. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. In the last part of this article, cyt c adsorption experiments were performed in a magnetically stabilized fluidized bed (MSFB) system at optimum conditions determined from the batch experiments. The adsorption capacity decreased significantly from 46.8 to 15.4 mg/g polymer with the increase of the flow-rate from 0.5 to 4.0 ml/min. The resulting magnetic chelator beads possessed excellent long-term storage stability.

Immobilization of lipase onto micron-size magnetic beads

A novel and economical magnetic poly(methacrylate-divinylbenzene) microsphere (less than 8 microm in diameter) was synthesized by the modified suspension polymerization of methacrylate and cross-linker divinylbenzene in the presence of magnetic fluid. Then, surface aminolysis was employed to obtain a high content of surface amino groups (0.40-0.55 mmolg(-1) supports). The morphology and properties of these magnetic supports were characterized with scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and a vibrating sample magnetometer. These magnetic supports exhibited superparamagnetism with a high specific saturation magnetization (sigma(s)) of 14.6 emicrog(-1). Candida cylindracea lipase was covalently immobilized on the amino-functionalized magnetic supports with the activity recovery up to 72.4% and enzyme loading of 34.0 mgg(-1) support, remarkably higher than the previous studies. The factors involved in the activity recovery and enzymatic properties of the immobilized lipase prepared were studied in comparison with free lipase, for which olive oil was chosen as the substrate. The results show that the immobilized lipase has good stability and reusability after recovery by magnetic separation within 20s.

Characterization of amyloglucosidase immobilized on the copolymer of ethylene glycol dimethacrylate and glycidyl methacrylate in simulated industrial conditions

The application of amyloglucosidase immobilized on the macroporous co-polymer of ethylene glycol dimethacrylate and glycidyl methacrylate (poly (GMA-co-EGDMA)) in an enzyme reactor was shown. The higher thermostability of immobilized glucoamylases than the soluble one was demonstrated. Immobilized amyloglucosidase obtained by the periodate method shows two times higher thermo stability than the soluble form. Glucoamylases immobilized on poly (GMA-co-EGDMA) have good mechanical and chemical features in the reactor and when applied in a continuous flow reactor for 28 days no changes are observed. In this period periodate immobilized amyloglucosidase shows no decrease in activity. It showed potential for the continuous production of glucose from starch over a prolonged period of time.

Preparation of magnetic dye affinity adsorbent and its use in the removal of aluminium ions

Aluminium has recently been considered as a causative agent in dialysis encephalopathy, osteodystrophy, and anemia occuring in hemodialysis patients. The aim of this study is to prepare magnetic poly(2-hydroxyethylmethacrylate) (mPHEMA) adsorbent and to investigate it's useability for the removal of Al(III) ions from drinking and dialysis water. Magnetic PHEMA beads in a size range 80-120 microm were produced by a dispersion polymerization technique. Then Alizarin Red was covalenlty attached onto the mPHEMA beads. Al(III) adsorption from aqueous solutions was examined by batch system. mPHEMA beads were characterized by swelling tests, electron spin resonance (ESR), scanning electron microscopy (SEM), and elemental analysis. Important results obtained in this study are as follows: the swelling ratio of mPHEMA beads was 34%. The presence of magnetite in the polymeric structure was confirmed by ESR. The mPHEMA beads have a spherical shape and porous structure. Alizarin Red loading was 135.8 micromol g(-1) polymer. The maximum Al(III) adsorption was 722 micromol g(-1) polymer at pH 5.0. Non-specific Al(III) adsorption was about 23 micromol g(-1) polymer under the same conditions. High desorption ratios (98%) were achieved by using 0.1 M HNO3. It was possible to reuse the beads without significant loss of Al(III) adsorption capacity.