Logic control of enzyme-like gold nanoparticles for selective detection of lead and mercury ions

Recent Progresses in Nanobiosensing for Food Safety Analysis

With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014-present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly.

Ultrasensitive, Specific, Recyclable, and Reproducible Detection of Lead Ions in Real Systems through a Polyadenine-Assisted, Surface-Enhanced Raman Scattering Silicon Chip

It is of great significance to accurately and reliably detect trace lead(II) (Pb(2+)) ions, preferably at sub-nM level due to the possible long-term accumulation of Pb(2+) in the human body, which may cause serious threats to human health. However, a suitable Pb(2+) sensor meeting the demands is still scanty. Herein, we develop a polyadenine-assisted, surface-enhanced Raman scattering (SERS) silicon chip (0.5 cm × 0.5 cm) composed of core (Ag)-satellite (Au) nanoparticles (Ag-Au NPs)-decorated silicon wafers (Ag-Au NPs@Si) for high-performance Pb(2+) detection. Typically, strong SERS signals could be measured when DNAzyme conjugated on the SERS silicon chip is specifically activated by Pb(2+), cleaving the substrate strand into two free DNA strands. A good linearity exists between the normalized Raman intensities and the logarithmic concentrations of Pb(2+) ranging from 10 pM to 1 μM with a good correlation coefficient, R(2) of 0.997. Remarkably, Pb(2+) ions with a low concentration of 8.9 × 10(-12) M can be readily determined via the SERS silicon chip ascribed to its superior SERS enhancement, much lower than those (∼nM) reported by other SERS sensors. Additionally, the developed chip features good selectivity and recyclability (e.g., ∼11.1% loss of Raman intensity after three cycles). More importantly, the as-prepared chip can be used for accurate and reliable determination of unknown Pb(2+) ions in real systems including lake water, tap water and industrial wastewater, with the RSD value less than 12%.

Sensitive and selective colorimetric detection of Hg2+ by a Hg2+ induced dual signal amplification strategy based on cascade-type catalytic reactions

A simple and fast colorimetric method is developed for the sensitive and selective detection of Hg²⁺ based on a dual signal amplification strategy.

Nanozymes in bionanotechnology: from sensing to therapeutics and beyond

Nanozymes are nanomaterials with enzyme-like characteristics, which have found broad applications in various areas including bionanotechnology and beyond.

Gold nanoparticles as sensitive optical probes

Recent advances in Au NP based optical sensing systems for various analytes based on absorption, fluorescence and SERS are summarized.

Target-induced nanocatalyst deactivation facilitated by core@shell nanostructures for signal-amplified headspace-colorimetric assay of dissolved hydrogen sulfide

Colorimetric assay platforms for dissolved hydrogen sulfide (H2S) have been developed for more than 100 years, but most still suffer from relatively low sensitivity. One promising route out of this predicament relies on the design of efficient signal amplification methods. Herein, we rationally designed an unprecedented H2S-induced deactivation of (gold core)@(ultrathin platinum shell) nanocatalysts (Au@TPt-NCs) as a highly efficient signal amplification method for ultrasensitive headspace-colorimetric assay of dissolved H2S. Upon target introduction, Au@TPt-NCs were deactivated to different degrees dependent on H2S levels, and the degrees could be indicated by using a Au@TPt-NCs-triggered catalytic system as a signal amplifier, thus paving a way for H2S sensing. The combination of experimental studies and density functional theory (DFT) studies revealed that the Au@TPt-NCs with only 2-monolayer equivalents of Pt (θPt = 2) were superior for H2S-induced nanocatalyst deactivation owing to their enhanced peroxidase-like catalytic activity and deactivation efficiency stemmed from the unique synergistic structural/electronic effects between Au nanocores and ultrathin Pt nanoshells. Importantly, our analytical results showed that the designed method was indeed highly sensitive for sensing H2S with a wide linear range of 10-100 nM, a slope of 0.013 in the regression equation, and a low detection limit of 7.5 nM. Also the selectivity, reproducibility, and precision were excellent. Furthermore, the method was validated for the analysis of H2S-spiked real samples, and the recovery in all cases was 91.6-106.7%. With the merits of high sensitivity and selectivity, simplification, low cost, and visual readout with the naked eye, the colorimetric method has the potential to be utilized as an effective detection kit for point-of-care testing.

Poly(thymine)-templated fluorescent copper nanoparticles for ultrasensitive label-free detection of Pb²⁺ ion

Polythymine (poly T)-templated copper nanoparticles (CuNPs) were demonstrated as novel and sensitive fluorescence probes for the detection of Pb(2+) based on the fluorescence quenching effect. The as-prepared CuNPs displayed strong fluorescence emission. However, the fluorescence of CuNPs was readily quenched in the presence of Pb(2+). These changes in fluorescence intensity of CuNPs allowed for the analysis of Pb(2+) with rapidity (<10 min), simplicity (label-free), high sensitivity (LOD 0.4 nM), high selectivity (no interference from other metal ions) and at low-cost (without any labels and sophisticated operation). We validated the practicality of using CuNPs for the determination of Pb(2+) in environmental samples through analyses of tap water samples.

Green synthesis of gold nanoparticles and its application for the trace level determination of painter's colic

The green synthesis of metal nanoparticles is found to be more attractive in various disciplines, including in analytical chemistry for heavy metal ion sensing.

Binary DNA hairpin-based colorimetric biochip for simultaneous detection of Pb2+ and Hg2+ in real-world samples

A novel microarray-format colorimetric biochip was constructed for simultaneously detecting the trace amounts of Pb²⁺ and Hg²⁺ in various real-world samples.

Label-free fluorescence detection of mercury ions based on the regulation of the Ag autocatalytic reaction

This work reports on a fluorescent sensor for Hg²⁺ based on the inhibition of the Ag(i)-mediated oxidation of o-phenylenediamine into fluorescent 2,3-diaminophenazine.

A fluorescent nanosensor based on graphene quantum dots-aptamer probe and graphene oxide platform for detection of lead (II) ion

The sensitive detection of heavy metal ions in the organism and aquatic ecosystem using nanosensors based on environment friendly and biocompatible materials still remains a challenge. A fluorescent turn-on nanosensor for lead (II) detection based on biocompatible graphene quantum dots and graphene oxide by employment of Pb(2+)-induced G-quadruplex formation was reported. Graphene quantum dots with high quantum yield, good biocompatibility were prepared and served as the fluorophore of Pb(2+) probe. Fluorescence turn-off of graphene quantum dots is easily achieved through efficient photoinduced electron transfer between graphene quantum dots and graphene oxide, and subsequent fluorescence turn-on process is due to the formation of G-quadraplex aptamer-Pb(2+) complex triggered by the addition of Pb(2+). This nanosensor can distinguish Pb(2+) ion from other ions with high sensitivity and good reproducibility. The detection method based on this nanosensor possesses a fast response time of one minute, a broad linear span of up to 400.0 nM and ultralow detection limit of 0.6 nM.

Biosensors with built-in biomolecular logic gates for practical applications

Molecular logic gates, designs constructed with biological and chemical molecules, have emerged as an alternative computing approach to silicon-based logic operations. These molecular computers are capable of receiving and integrating multiple stimuli of biochemical significance to generate a definitive output, opening a new research avenue to advanced diagnostics and therapeutics which demand handling of complex factors and precise control. In molecularly gated devices, Boolean logic computations can be activated by specific inputs and accurately processed via bio-recognition, bio-catalysis, and selective chemical reactions. In this review, we survey recent advances of the molecular logic approaches to practical applications of biosensors, including designs constructed with proteins, enzymes, nucleic acids, nanomaterials, and organic compounds, as well as the research avenues for future development of digitally operating “sense and act” schemes that logically process biochemical signals through networked circuits to implement intelligent control systems.

Dual fluorescence resonance energy transfer assay between tunable upconversion nanoparticles and controlled gold nanoparticles for the simultaneous detection of Pb²⁺ and Hg²⁺

In this work, we presented a novel dual fluorescence resonance energy transfer (FRET) system for the simultaneous detection of Pb(2+) and Hg(2+). This system employed two color upconversion nanoparticles (UCNPs) as the donors, and controlled gold nanoparticles (AuNPs) as the acceptors. The two donor-acceptor pairs were fabricated by hybridizing the aptamers and their corresponding complementary DNA. Thus, the green and red upconversion fluorescence could be quenched because of a good overlap between the UCNPs fluorescence emission and the AuNPs absorption spectrum. In the presence of Pb(2+) and Hg(2+), the aptamers preferred to bind to their corresponding analytes and formed a G-quadruplexes structure for Pb(2+) and the hairpin-like structure for Hg(2+). As a result, the dual FRET was disrupted, and the green and red upconversion fluorescence was restored. Under optimized experimental conditions, the relative fluorescence intensity increased as the metal ion concentrations were increased, allowing for the quantification of Pb(2+) and Hg(2+). The relationships between the fluorescence intensity and plotting logarithms of ion concentrations were linear in the range from 0.1 to 100 nM for Pb(2+) and 0.5 to 500 nM for Hg(2+), and the detection limits of Pb(2+) and Hg(2+) were 50 pM and 150 pM, respectively. As a practical application, the aptasensor was used to monitor Pb(2+) and Hg(2+) levels in naturally contaminated samples and human serum samples. Ultimately, this type of dual FRET could be used to detect other metal ions or contaminants in food safety analysis and environment monitoring.