Electrogenerated Chemiluminescence Resonance Energy Transfer between Luminol and CdSe@ZnS Quantum Dots and Its Sensing Application in the Determination of Thrombin

Electrochemiluminescence biosensing based on different modes of switching signals

Electrochemiluminescence (ECL) has attracted much attention in various fields of analysis owing to low background signals, high sensitivity, and excellent controllability.

Nanotechnology-Enhanced No-Wash Biosensors for in Vitro Diagnostics of Cancer

In vitro biosensors have been an integral component for early diagnosis of cancer in the clinic. Among them, no-wash biosensors, which only depend on the simple mixing of the signal generating probes and the sample solution without additional washing and separation steps, have been found to be particularly attractive. The outstanding advantages of facile, convenient, and rapid response of no-wash biosensors are especially suitable for point-of-care testing (POCT). One fast-growing field of no-wash biosensor design involves the usage of nanomaterials as signal amplification carriers or direct signal generating elements. The analytical capacity of no-wash biosensors with respect to sensitivity or limit of detection, specificity, stability, and multiplexing detection capacity is largely improved because of their large surface area, excellent optical, electrical, catalytic, and magnetic properties. This review provides a comprehensive overview of various nanomaterial-enhanced no-wash biosensing technologies and focuses on the analysis of the underlying mechanism of these technologies applied for the early detection of cancer biomarkers ranging from small molecules to proteins, and even whole cancerous cells. Representative examples are selected to demonstrate the proof-of-concept with promising applications for in vitro diagnostics of cancer. Finally, a brief discussion of common unresolved issues and a perspective outlook on the field are provided.

Facile synthesis of bovine serum albumin conjugated low-dimensional ZnS nanocrystals

We present a facile synthesis of bovine serum albumin (BSA) conjugated low-dimensional ZnS nanocrystals. The experimental parameters such as effects of BSA concentration and precursor vol ratios of Zn:S on the formation of ZnS nanoparticles in BSA matrix were investigated. The ZnS crystalline sizes of 1.9, 1.8 and 1.6nm were obtained by using the BSA concentrations of 1×10^-4, 5×10^-4 and 10×10^-4g/mL, respectively, with a fixed Zn:S vol ratio of 1:1. The ZnS samples prepared from 1:10 and 10:1 vol ratios of Zn:S at BSA concentration of 5×10^-4g/mL shows the crystalline sizes of ZnS are 2.1 and 1.5nm, respectively. FT-IR analysis suggests that the prepared ZnS nanoparticles might be conjugated through the interactions of hydroxyl and amine groups present in BSA. We evaluate the cytotoxicity of the prepared ZnS nanoparticles, the THP-1 cells showed a good viability (>88%) for all the prepared ZnS samples. The plausible mechanism for the formation of ZnS-BSA composite has also been discussed.

DNA nanomachine-based regenerated sensing platform: a novel electrochemiluminescence resonance energy transfer strategy for ultra-high sensitive detection of microRNA from cancer cells

The construction of DNA nanomachines holds great significance in the development of DNA nanostructures; however, the real application of nanomachines is still in its early stage. Moreover, one-step regenerated sensing platforms for the detection of biomarkers in the current research remain a practical challenge. Herein, a novel electrochemiluminescence resonance energy transfer (ERET) strategy between Alexa Flour 488 (AF 488), which is a type of small molecule dye, as the donor and CdSe@ZnS quantum dots (QDs) as the acceptor, which easily enter the cells, has been reported and was applied for the construction of a DNA nanomachine-based regenerated biosensor for the ultra-high sensitive determination of cancer cells without any enzyme. First, a dual amplification strategy, including target recycling and signal transformation, was employed to achieve the conversion of a small number of miRNAs into a large amount of universal DNA reporters. Initially, the DNA tweezer was kept in the "off" state with two arms labeled with QDs and AF488, respectively. Second, in the presence of DNA reporters, the tweezer transformed to the "on" state through the hybridization of the reporter DNA and exposed the arms of the tweezer. Simultaneously, QDs and AF488 on the two arms were close enough to generate ERET, which remarkably increased the ECL intensity of the QDs. Impressively, the sensor could be regenerated by a one-step strand displacement and could be cycled for more than seven times. Owing to the dual amplification strategy and the high efficiency of the ERET between the QDs and AF488, the proposed biosensor performs in the linear range from 10 pM to 0.1 fM with a detection limit of 0.03 fM for miRNA determination, and the monitoring of different cancer cells was also achieved. Moreover, the elaborated biosensor can also realize the sensitive detection of Pb²⁺, which indicates that it can be potentially used for field environmental analysis and monitoring, thus offering a new modular platform for the construction of functional DNA nanomachines in the ultra-high sensitive analysis of promising biomarkers and toxic metals.

Highly Efficient Intramolecular Electrochemiluminescence Energy Transfer for Ultrasensitive Bioanalysis of Aflatoxin M1

The intermolecular electrochemiluminescence resonance energy transfer (ECL-RET) between luminol and Ru(bpy)₃²⁺ was studied extensively to achieve the sensitive bioanalysis owing to the perfect spectral overlap of the donor and acceptor, but it still suffers from the challenging issue of low energy-transfer efficiency. The intramolecular ECL-RET towards the novel ECL compound containing the donor of luminol and the acceptor of Ru(bpy)₂ (mcpbpy)²⁺ (Lum-Ru) was designed and investigated. With the high-efficient ECL-RET in one molecule, the highly intense ECL signal of Lum-Ru was obtained owing to the short path of energy transmission and less energy loss between luminol and Ru(bpy)₂ (mcpbpy)²⁺ . Lum-Ru was further applied to construct a signal-off electrochemiluminescence (ECL) aptasensor for ultrasensitive detection of a harsh carcinogen of Aflatoxin M1 (AFM1). This sensing platform also provides a significant boost for the trace detection of other biomolecules in clinical analysis.

A review of electrogenerated chemiluminescent biosensors for assays in biological matrices

Electrogenerated chemiluminescence (ECL) is the production of light via electron transfer reactions between electrochemically produced reagents. ECL-based biosensors use specific biological interactions to recognize an analyte and produce a luminescent signal. Biosensors fabricated with novel biorecognition species have increased the number of analytes detected. Some of these analytes include peptides, cells, enzymes and nucleic acids. ECL biosensors are selective, simple, sensitive and have low detection limits. Traditional methods use ruthenium complexes or luminol to generate ECL. Nanomaterials can be incorporated into ECL biosensors to improve efficiency, but also represent a new class of ECL emitters. This article reviews the application of ruthenium complex, luminol and nanomaterial-based ECL biosensors to making measurements in biological matrices over the past 4 years.

Visual detection of thrombin using a strip biosensor through aptamer-cleavage reaction with enzyme catalytic amplification

A new class of strip biosensors has been established based on well-distributed thrombin aptamer-linked gold nanoparticle aggregates, which will undergo a cracking reaction when the target recognizes its homologous aptamer. Combining the aptamer-cleavage reaction with the enzyme catalytic amplification system, our proposed lateral flow strip biosensor (LFB) is capable of visually detecting 6.4 pM of thrombin without instrumentation within 12 minutes. Under the optimal conditions, the quantitative detection of thrombin by a portable strip reader exhibited a linear relationship between the peak area and the concentration of thrombin in the range of 6.4 pM-500 nM with a detection limit of 4.9 pM, which is three orders of magnitude lower than that of the aptamer-functionalized gold nanoparticle-based LFB (2.5 nM, Xu et al., Anal. Chem., 2009, 81, 669-675). As the aptamers have no special requirements and the gold nanoparticles can also be replaced by other metallic nanoparticles, this method for strip sensing is expected to be generally applicable in point of care testing, home testing, medical diagnostics, clinical diagnosis, and environmental monitoring.

A sensitive electrochemiluminescent aptasensor based on perylene derivatives as a novel co-reaction accelerator for signal amplification

Herein, a novel signal amplification strategy was designed using the perylene derivative as the co-reaction accelerator toward graphene-CdTe quantum dots (G-CdTe)/S2O8(2-) system to construct a highly sensitive electrochemiluminescent (ECL) aptasensor for thrombin (TB) detection. Firstly, the G-CdTe nanocomposites were prepared by one-step method of in situ generating CdTe quantum dots onto the surface of the graphene oxide by using 3-mercaptopropionic acid as the CdTe QDs stabilizer. Then, a kind of perylene derivative (PTC-Lys), was synthesized by covalently binding L-lysine to 3,4,9,10-perylenetetracarboxylic acid, which was further immobilized onto the G-CdTe by the π-π* stacking and cross-linked the detection thrombin aptamer (TBA II) to obtain the TBA II/PTC-Lys/G-CdTe signal probes. It is worth pointing out that PTC-Lys acting as an efficient co-reaction accelerator interacted with the co-reactant of S2O8(2-) rather than G-CdTe to promote the more oxidant mediators of SO4(•-), which could further react with G-CdTe to produce excited state species G-CdTe* for emitting light. Compared with the G-CdTe/S2O8(2-) ECL system, our proposed strategy with the introduction of co-reaction accelerator of PTC-Lys exhibited ultra-high sensitivity to quantify the concentration of TB from 1.0×10(-7)nM to 10nM with a detection limit of 34aM.

General Bioluminescence Resonance Energy Transfer Homogeneous Immunoassay for Small Molecules Based on Quantum Dots

Here, we describe a general bioluminescence resonance energy transfer (BRET) homogeneous immunoassay based on quantum dots (QDs) as the acceptor and Renilla luciferase (Rluc) as the donor (QD-BRET) for the determination of small molecules. The ratio of the donor-acceptor that could produce energy transfer varied in the presence of different concentrations of free enrofloxacin (ENR), an important small molecule in food safety. The calculated Förster distance (R0) was 7.86 nm. Under optimized conditions, the half-maximal inhibitory concentration (IC50) for ENR was less than 1 ng/mL and the linear range covered 4 orders of magnitude (0.023 to 25.60 ng/mL). The cross-reactivities (CRs) of seven representative fluoroquinolones (FQs) were similar to the data obtained by an enzyme-linked immunosorbent assay (ELISA). The average intra- and interassay recoveries from spiked milk of were 79.8-118.0%, and the relative standard deviations (RSDs) were less than 10%, meeting the requirement of residue detection, which was a satisfactory result. Furthermore, we compared the influence of different luciferase substrates on the performance of the assay. Considering sensitivity and stability, coelenterazine-h was the most appropriate substrate. The results from this study will enable better-informed decisions on the choice of Rluc substrate for QD-BRET systems. For the future, the QD-BRET immunosensor could easily be extended to other small molecules and thus represents a versatile strategy in food safety, the environment, clinical diagnosis, and other fields.

Highly intense fluorescence of novel carbon nanocrystals combined with a DNAzyme-assisted autocatalytic multiple amplification strategy for sensitive detection of thrombin

Novel water-soluble CNCs with excellent fluorescence were prepared, and successfully applied to sensitive fluorescence detection of thrombin by using an enzyme-assisted autocatalytic DNA recycling amplification strategy.

A robust electrochemiluminescence immunoassay for carcinoembryonic antigen detection based on a microtiter plate as a bridge and Au@Pd nanorods as a peroxidase mimic

The common drawbacks of most traditional electrochemiluminescence (ECL) immunoassays are the strict storage conditions for the ECL electrode and the steric hindrance caused by bovine serum albumin and antigen.

Dual-stabilizer-capped CdSe quantum dots for “Off–On” electrochemiluminescence biosensing of thrombin by target-triggered multiple amplification

A novel CdSe QDs was used to design a promising ECL biosensor for thrombin assay by target-triggered multiple amplification.

Ferrocyanide-Ferricyanide Redox Couple Induced Electrochemiluminescence Amplification of Carbon Dots for Ultrasensitive Sensing of Glutathione

Here we report a novel solid-state ECL sensor for ultrasensitive sensing of glutathione (GSH) based on ferrocyanide-ferricyanide redox couple (Fe(CN)6(3-/4-)) induced electrochemiluminescence (ECL) amplification of carbon dots (C-dots). The electropolymerization of C-dots and (11-pyrrolyl-1-yl-undecyl) triethylammonium tetrafluoroborate (A2) enabled immobilization of the hydrophilic C-dots on the surface of glassy carbon electrode (GCE) perfectly, while the excellent conductivity of polypyrrole was exploited to accelerate electron transfer between them. The Fe(CN)6(3-/4-) can expeditiously convert the C-dots and S2O8(2-) to C-dot(•-) and SO4(•-), respectively. High yields of the excited state C-dots (C-dots*) were obtained, and a ∼10-fold ECL amplification was realized. The C-dots* obtained through the recombination of electron-injected and hole-injected processes may be impeded due to the interference of GSH to K2S2O8. Therefore, the constructed sensor for GSH showed a detection limit down to 54.3 nM (S/N = 3) and a wide linear range from 0.1-1.0 μM with a correlation coefficient of 0.997.

Anodic Electrogenerated Chemiluminescence of Ru(bpy)3(2+) with CdSe Quantum Dots as Coreactant and Its Application in Quantitative Detection of DNA

In the present paper, we report that CdSe quantum dots (QDs) can act as the coreactant of Ru(bpy)₃²⁺ electrogenerated chemiluminescence (ECL) in neutral condition. Strong anodic ECL signal was observed at ~1.10 V at CdSe QDs modified glassy carbon electrode (CdSe/GCE), which might be mainly attributed to the apparent electrocatalytic effect of QDs on the oxidation of Ru(bpy)₃²⁺. Ru(bpy)₃²⁺ can be intercalated into the loop of hairpin DNA through the electrostatic interaction to fabricate a probe. When the probe was bound to the CdSe QDs modified on the GCE, the intense ECL signal was obtained. The more Ru(bpy)₃²⁺ can be intercalated when DNA loop has larger diameter and the stronger ECL signal can be observed. The loop of hairpin DNA can be opened in the presence of target DNA to release the immobilized Ru(bpy)₃²⁺, which can result in the decrease of ECL signal. The decreased ECL signal varied linearly with the concentration of target DNA, which showed the ECL biosensor can be used in the sensitive detection of DNA. The proposed ECL biosensor showed an excellent performance with high specificity, wide linear range and low detection limit.

Electrochemiluminescence Resonance Energy Transfer System: Mechanism and Application in Ratiometric Aptasensor for Lead Ion

In this paper, a novel electrochemiluminescence resonance energy transfer (ECL-RET) system from O2/S2O8(2-) to a kind of amino-terminated perylene derivative (PTC-NH2) was demonstrated for the first time, which was then applied to construct a ratiometric aptasensor for lead ion (Pb(2+)) detection. First, gold-nanoparticles-functionalized fullerene nanocomposites (AuNPs@nano-C60) were coated on a glassy carbon electrode (GCE), and then thiol-modified assistant probes (APs) were attached on AuNPs@nano-C60/GCE. Then the resultant electrode was hybridized with capture probes (the aptamer of the Pb(2+), abbreviated as CPs) to generate DNA duplexes, which could induce PTC-NH2 to be intercalated into the dsDNA grooves by the electrostatic adsorption. Herein, ECL dual peaks at -0.7 V (vs Ag/AgCl) and -2.0 V (vs Ag/AgCl) were obtained when the prepared aptasensor was detected in air-saturated S2O8(2-) solution, which could be attributed to the emission of excited dimmers (π-excimers) ((1)(NH2-PTC)2*) and (1)(O2)2*, respectively. In the presence of Pb(2+), the dsDNA was unwound, and Pb(2+) G-quadruplex structure was generated because of the highly specific affinity between Pb(2+) and CPs, which made the PTC-NH2 release from the electrode surface. As a result, the ECL signal at -0.7 V was decreased, and the ECL signal around -2.0 V was increased. By measuring the ratio of ECL intensities at two excitation potentials, the developed aptasensor exhibited the linear response range from 1.0 × 10(-12) M to 1.0 × 10(-7) M with a detection limit of 3.5 × 10(-13) M (S/N = 3) for Pb(2+), which could offer an alternative analytical method with excellent properties of high selectivity, accuracy, and sensitivity.

Enhanced sensing performance of supported graphitic carbon nitride nanosheets and the fabrication of electrochemiluminescent biosensors for IgG

A greatly enhanced ECL signal was obtained after the incorporation of C₃N₄ nanosheets into the NPG matrix and a label-free ECL immunosensor was proposed.