Nonenzymatic Electrochemical Detection of Glucose Based on Palladium−Single-Walled Carbon Nanotube Hybrid Nanostructures

MoS2/Pt nanocomposite-functionalized microneedle for real-time monitoring of hydrogen peroxide release from living cells

This work describes the adaptive use of a conventional stainless steel acupuncture needle as the electrode substrate for construction of a molybdenum disulfide (MoS₂) and platinum nanoparticles (PtNPs) layer-modified microneedle sensor for real-time monitoring of hydrogen peroxide (H₂O₂) release from living cells. To construct the nanocomposite-functionalized microneedle, the needle surface was first coated with a gold film by ion sputtering to enhance the conductivity. Subsequently, an electrochemical deposition method was successfully employed to deposit MoS₂ nanosheet and Pt nanoparticles on the needle tip as the sensing interface. Electrochemical study demonstrated that the MoS₂/PtNPs nanocomposite-modified needle exhibited excellent catalytic performance and low over-potential toward the reduction of H₂O₂. Not only did the microneedle achieve a wide linear range from 1 to 100 μmol L^-1 with a limit of detection down to 0.686 μmol L^-1, but it also realized the highly specific detection of H₂O₂. Owing to these remarkable analytical advantages, the prepared microneedle was applied to determine H₂O₂ release from living cells with satisfactory results. The MoS₂/PtNPs nanocomposite-functionalized microneedle sensor is simple and affordable, and can serve as a promising electrochemical nonenzymatic sensing platform. Moreover, this superfine needle sensor shows great potential for real-time monitoring of reactive oxygen species in vivo with minimal damage.

Carbon Nanostructures as a Multi-Functional Platform for Sensing Applications

The various forms of carbon nanostructures are providing extraordinary new opportunities that can revolutionize the way gas sensors, electrochemical sensors and biosensors are engineered. The great potential of carbon nanostructures as a sensing platform is exciting due to their unique electrical and chemical properties, highly scalable, biocompatible and particularly interesting due to the almost infinite possibility of functionalization with a wide variety of inorganic nanostructured materials and biomolecules. This opens a whole new pallet of specificity into sensors that can be extremely sensitive, durable and that can be incorporated into the ongoing new generation of wearable technology. Within this context, carbon-based nanostructures are amongst the most promising structures to be incorporated in a multi-functional platform for sensing. The present review discusses the various 1D, 2D and 3D carbon nanostructure forms incorporated into different sensor types as well as the novel functionalization approaches that allow such multi-functionality.

Three-Dimensional Nanostructured Palladium with Single Diamond Architecture for Enhanced Catalytic Activity

Fuel cells are a key new green technology that have applications in both transport and portable power generation. Carbon-supported platinum (Pt) is used as an anode and cathode electrocatalyst in low-temperature fuel cells fueled with hydrogen or low-molecular-weight alcohols. The cost of Pt and the limited world supply are significant barriers to the widespread use of these types of fuel cells. Comparatively, palladium has a 3 times higher abundance in the Earth's crust. Here, a facile, low-temperature, and scalable synthetic route toward three-dimensional nanostructured palladium (Pd) employing electrochemical templating from inverse lyotropic lipid phases is presented. The obtained single diamond morphology Pd nanostructures exhibited excellent catalytic activity and stability toward methanol, ethanol, and glycerol oxidation compared to commercial Pd black, and the nanostructure was verified by small-angle X-ray scattering, scanning tunneling electron microscopy, and cyclic voltammetry.

Comparative analysis of single-walled and multi-walled carbon nanotubes for electrochemical sensing of glucose on gold printed circuit boards

In the present work, a comparative study was performed between single-walled carbon nanotubes and multi-walled carbon nanotubes coated gold printed circuit board electrodes for glucose detection. Various characterization techniques were demonstrated in order to compare the modified electrodes viz. cyclic voltammetry, electrochemical impedance spectroscopy and chrono-amperometry. Results revealed that single-walled carbon nanotubes outperformed multi-walled carbon nanotubes and proved to be a better sensing interface for glucose detection. The single-walled carbon nanotubes coated gold printed circuit board electrodes showed a wide linear sensing range (1 mM to 100 mM) with detection limit of 0.1 mM with response time of 5 s while multi-walled carbon nanotubes coated printed circuit board gold electrodes showed linear sensing range (1 mM to 100 mM) with detection limit of 0.1 mM with response time of 5 s. This work provided low cost sensors with enhanced sensitivity, fast response time and reliable results for glucose detection which increased the affordability of such tests in remote areas. In addition, the comparative results confirmed that single-walled carbon nanotubes modified electrodes can be exploited for better amplification signal as compared to multi-walled carbon nanotubes.

Fabrication of RGO-NiCo2O4 nanorods composite from deep eutectic solvents for nonenzymatic amperometric sensing of glucose

A novel reduced graphene oxide supported nickel cobaltate nanorods composite (RGO-NiCo₂O₄) was prepared by a simple ionothermal method in deep eutectic solvents for the first time. Electrochemical results demonstrated that the obtained nanocomposite modified glassy carbon electrode exhibited excellent electrocatalytic performance towards the oxidation of glucose with a wide double-linear range from 1 μM to 25 mM and a low detection limit of 0.35 μM (S/N = 3). NiCo₂O₄ nanorods with many small interconnected nanoparticles provided many electrocatalytic active sites, while RGO with large surface area offered good electrical conductivity. The synergistic effect between NiCo₂O₄ nanorods and RGO contributed to the enhanced sensing ability of the hybrid nanostructure. This sensitive glucose sensor can be also used for the practical detection of glucose in human serum.

Embedded Disposable Functionalized Electrochemical Biosensor with a 3D-Printed Flow Cell for Detection of Hepatic Oval Cells (HOCs)

Hepatic oval cells (HOCs) are considered the progeny of the intrahepatic stem cells that are found in a small population in the liver after hepatocyte proliferation is inhibited. Due to their small number, isolation and capture of these cells constitute a challenging task for immunosensor technology. This work describes the development of a 3D-printed continuous flow system and exploits disposable screen-printed electrodes for the rapid detection of HOCs that over-express the OV6 marker on their membrane. Multiwall carbon nanotube (MWCNT) electrodes have a chitosan film that serves as a scaffold for the immobilization of oval cell marker antibodies (anti-OV6-Ab), which enhance the sensitivity of the biomarker and makes the designed sensor specific for oval cells. The developed sensor can be easily embedded into the 3D-printed flow cell to allow cells to be exposed continuously to the functionalized surface. The continuous flow is intended to increase capture of most of the target cells in the specimen. Contact angle measurements were performed to characterize the nature and quality of the modified sensor surface, and electrochemical measurements (cyclic voltammetry (CV) and square wave voltammetry (SWV)) were performed to confirm the efficiency and selectivity of the fabricated sensor to detect HOCs. The proposed method is valuable for capturing rare cells and could provide an effective tool for cancer diagnosis and detection.

MoS2–Au@Pt nanohybrids as a sensing platform for electrochemical nonenzymatic glucose detection

A MoS₂–Au@Pt nanohybrid was used as a sensing platform for electrochemical nonenzymatic glucose detection with high sensitivity, selectivity and stability.

Electrochemical nonenzymatic sensing of glucose using advanced nanomaterials

An overview (with 376 refs.) is given here on the current state of methods for electrochemical sensing of glucose based on the use of advanced nanomaterials. An introduction into the field covers aspects of enzyme based sensing versus nonenzymatic sensing using nanomaterials. The next chapter cover the most commonly used nanomaterials for use in such sensors, with sections on uses of noble metals, transition metals, metal oxides, metal hydroxides, and metal sulfides, on bimetallic nanoparticles and alloys, and on other composites. A further section treats electrodes based on the use of carbon nanomaterials (with subsections on carbon nanotubes, on graphene, graphene oxide and carbon dots, and on other carbonaceous nanomaterials. The mechanisms for electro-catalysis are also discussed, and several Tables are given where the performance of sensors is being compared. Finally, the review addresses merits and limitations (such as the frequent need for working in strongly etching alkaline solutions and the need for diluting samples because sensors often have analytical ranges that are far below the glucose levels found in blood). We also address market/technology gaps in comparison to commercially available enzymatic sensors. Graphical Abstract Schematic representation of electrochemical nonenzymatic glucose sensing on the nanomaterials modified electrodes. At an applied potential, the nanomaterial-modified electrodes exhibit excellent electrocatalytic activity for direct oxidation of glucose oxidation.

The Enhanced Photo-Electrochemical Detection of Uric Acid on Au Nanoparticles Modified Glassy Carbon Electrode

In this work, a sensitive and novel method for determining uric acid (UA) has been developed, in which the glassy carbon electrode (GCE) was modified with electrodeposition Au nanoparticles and used to monitor the concentration of UA with the assistant of visible light illumination. The morphology of the Au nanoparticles deposited on GCE surface were characterized by scanning electron microscope (SEM) and the nanoparticles were found to be well-dispersed spheres with the average diameter approaching 26.1 nm. A series of cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements have revealed that the introduction of visible light can greatly enhance both the strength and stability of response current due to the surface plasmon resonance (SPR). Specifically, the DPV showed a linear relationship between peak current and UA concentration in the range of 2.8 to 57.5 μM with the equation of I pa (μA) = 0.0121c UA (μM) + 0.3122 (R 2 = 0.9987). Herein, the visible light illuminated Au/GCE possesses a potential to be a sensitive electrochemical sensor in the future.

Microwave Deposition of Palladium Catalysts on Graphite Spheres and Reduced Graphene Oxide Sheets for Electrochemical Glucose Sensing

This work outlines a synthetic strategy inducing the microwave-assisted synthesis of palladium (Pd) nanocrystals on a graphite sphere (GS) and reduced graphene oxide (rGO) supports, forming the Pd catalysts for non-enzymatic glucose oxidation reaction (GOR). The pulse microwave approach takes a short period (i.e., 10 min) to fast synthesize Pd nanocrystals onto a carbon support at 150 °C. The selection of carbon support plays a crucial role in affecting Pd particle size and dispersion uniformity. The robust design of Pd-rGO catalyst electrode displays an enhanced electrocatalytic activity and sensitivity toward GOR. The enhanced performance is mainly attributed to the synergetic effect that combines small crystalline size and two-dimensional conductive support, imparting high accessibility to non-enzymatic GOR. The rGO sheets serve as a conductive scaffold, capable of fast conducting electron. The linear plot of current response versus glucose concentration exhibits good correlations within the range of 1–12 mM. The sensitivity of the Pd-rGO catalyst is significantly enhanced by 3.7 times, as compared to the Pd-GS catalyst. Accordingly, the Pd-rGO catalyst electrode can be considered as a potential candidate for non-enzymatic glucose biosensor.

Comparison of Pd electron beam induced deposition using two precursors and an oxygen purification strategy

Focused electron beam induced deposition (FEBID) allows the creation of nanoscale structures through dissociation of an organo-metallic precursor by electrons at the beam impact point. The deposition of Pd can be interesting for its catalytic behavior and ability to contact carbon based materials. Two precursors were investigated-Pd(hfac)₂ and (Cp)Pd(allyl)-and two deposition methods: with and without an in situ oxygen purification process. The deposition parameters can be tuned for the Pd(hfac)₂ precursor to provide a deposition with 23 ± 2 at.% of Pd and a main component of C at 51 ± 3 at.% and minor components of O and F. An in situ purification process using O₂ was much faster than expected and improved the Pd content to up to >65 at.% while reducing the C to ∼20 at.%, and avoiding the oxidation of Pd. The resistivity was ∼100 μOhm · cm and compares favorably with a bulk value of 10 μOhm · cm. The (Cp)Pd(allyl) precursor is interesting because it does not release fluorine during the deposition and hence it does not etch a possible substrate. Its FEBID deposition had a composition of 26 ± 5 at.% of Pd with 74 ± 5 at.% of C. The O₂ purification process can improve the Pd content up to ∼60 at.% while reducing C to <20 at.%, but also increasing the O content to 18 at%, which was released afterwards. The best resistivity was measured at ∼1000 μOhm · cm, although better values can be anticipated for longer post treatment times.

Noninvasive and Highly Selective Monitoring of Intracellular Glucose via a Two-Step Recognition-Based Nanokit

Accurate determination of intracellular glucose is very important for exploring its chemical and biological functions in metabolism events of living cells. In this paper, we developed a new noninvasive and highly selective nanokit for intracellular glucose monitoring via two-step recognition. The liposome-based nanokit coencapsulated the aptamer-functionalized gold nanoparticles (AuNPs) and the Shinkai's receptor together. When the proposed nanokit was transfected into living cells, the Shinkai's receptor could recognize glucose first and then changed its conformation to endow aptamers with binding and sensing properties which were not readily accessible otherwise. Then, the binary complexes formed by the intracellular glucose and the Shinkai's receptor can in situ displace the complementary oligonucleotide of the aptamer on the surface of AuNPs. The fluorophore-labeled aptamer was away from the AuNPs, and the fluorescent state switched from "off" to "on". Through the secondary identification of aptamer, the selectivity of the Shinkai's receptor could be greatly improved while the intracellular glucose level was assessed by fluorescence signal recovery of aptamer. In the follow-up application, the approach exhibits excellent selectivity and is noninvasive for intracellular glucose monitoring under normoxia and hypoxia. To the best of our knowledge, this is the first time that the advantages of organic receptors and nucleic acids have been combined and highly selective monitoring of intracellular glucose has been realized via two-step recognition. We expect it to open up new possibilities to integrate devices for diagnosis of various metabolic diseases and insulin delivery.

Highly Dispersed NiO Nanoparticles Decorating graphene Nanosheets for Non-enzymatic Glucose Sensor and Biofuel Cell

Nickel oxide-decorated graphene nanosheet (NiO/GNS), as a novel non-enzymatic electrocatalyst for glucose oxidation reaction (GOR), was synthesized through a facile hydrothermal route followed by the heat treatment. The successful synthesis of NiO/GNS was characterized by a series of techniques including XRD, BET, SEM and TEM. Significantly, the NiO/GNS catalyst show excellent catalytic activity toward GOR, and was employed to develop a sensitive non-enzymatic glucose sensor. The developed glucose sensor could response to glucose in a wide range from 5 μM-4.2 mM with a low detection limit (LOD) of 5.0 μM (S/N = 3). Importantly, compared with bare NiO, the catalytic activity of NiO/GNS was much higher. The reason might be that the 2D structure of graphene could prevent the aggregation of NiO and facilitate the electron transfer at electrode interface. Moreover, the outstanding catalytic activity of NiO/GNS was further demonstrated by applying it to construct a biofuel cell using glucose as fuel, which exhibited high stability and current density.

Construction of titanium dioxide nanorod/graphite microfiber hybrid electrodes for a high performance electrochemical glucose biosensor

The demand for a highly sensitive and selective glucose biosensor which can be used for implantable or on-time monitoring is constantly increasing. In this work, TiO2 nanorods were synthesized in situ on the surface of graphite microfibers to yield TiO2 nanorod/graphite microfiber hybrid electrodes. The TiO2 nanorods not only retain the high activity of the immobilized glucose molecule, but also promote the direct electron transfer process on the electrode surface. As a working electrode in an electrochemical glucose biosensor in a flowing system, the microfiber hybrid electrodes exhibit high sensitivity, selectivity and stability. Due to its simplicity, low cost, high stability, and unique morphology, the TiO2 nanorod/graphite microfiber hybrid electrode is expected to be an excellent candidate for an implantable biosensor or for in situ flow monitoring.