Nanoliter-volume 1H NMR detection using periodic stopped-flow capillary electrophoresis

Hyphenation of capillary separations with nuclear magnetic resonance spectroscopy

The hyphenation of small-volume separations to information-rich detection offers the promise of unmatched analytical information on the components of complex mixtures. Nuclear magnetic resonance (NMR) spectroscopy provides information about molecular structure, although sensitivity remains an issue for on-line NMR detection. This is especially true when hyphenating NMR to capillary separations as the observation time and analyte mass are decreased to the point where reduced information is obtained from the eluting analytes. Because of these limitations, advances in instrumental performance have a large impact on the overall performance of a separation-NMR system. Instrumental aspects and the capabilities of cLC-NMR, CEC-NMR and CE-NMR are reviewed, and applications that have used this technology highlighted. Recent trends towards small volume capillary scale separations are emphasized, as is the recent success of capillary-isotachophoresis (cITP)-NMR.

Spectral restoration from low signal-to-noise, distorted NMR signals: application to hyphenated capillary electrophoresis-NMR

In capillary electrophoresis separations coupled to NMR signal detection using small solenoidal coils, electrophoretic currents cause substantial distortion in the NMR spectral linewidths and peak heights, distortions which cannot be fully counteracted through shimming. The NMR spectra also have a low signal-to-noise ratio due to the small amounts of material, typically <1nmol, associated with such microseparations. This study proposes a two-step, signal processing method to restore spectral lines from the distorted NMR spectrum. First, a reference signal is acquired to estimate the broadening function, as a combination of several Lorentzian functions, using a gradient descent method. Then multi-resolution wavelet analysis is applied to the distorted spectrum to determine an initial estimate of the frequencies of the spectral lines. Convergence to the final spectrum, a second set of Lorentzians, involves deconvolution with the estimated broadening function using a gradient descent method. Experimental CE-NMR data show that considerable improvements in spectral quality are possible using this approach, although fine splittings can not be resolved if the broadening function is large.

Micromixer-based time-resolved NMR: applications to ubiquitin protein conformation

Time-resolved NMR spectroscopy is used to studychanges in protein conformation based on the elapsed time after a change in the solvent composition of a protein solution. The use of a micromixer and a continuous-flow method is described where the contents of two capillary flows are mixed rapidly, and then the NMR spectra of the combined flow are recorded at precise time points. The distance after mixing the two fluids and flow rates define the solvent-protein interaction time; this method allows the measurement of NMR spectra at precise mixing time points independent of spectral acquisition time. Integration of a micromixer and a microcoil NMR probe enables low-microliter volumes to be used without losing significant sensitivity in the NMR measurement. Ubiquitin, the model compound, changes its conformation from native to A-state at low pH and in 40% or higher methanol/water solvents. Proton NMR resonances of the His-68 and the Tyr-59 of ubiquitin are used to probe the conformational changes. Mixing ubiquitin and methanol solutions under low pH at microliter per minute flow rates yields both native and A-states. As the flow rate decreases, yielding longer reaction times, the population of the A-state increases. The micromixer-NMR system can probe reaction kinetics on a time scale of seconds.

Separation of twenty underivatized essential amino acids by capillary zone electrophoresis with contactless conductivity detection

Twenty underivatized essential amino acids were separated using capillary zone electrophoresis and consequently detected with contactless conductivity detection (CCD). A simple acidic background electrolyte (BGE) containing 2.3 M acetic acid and 0.1% w/w hydroxyethylcellulose (HEC) allowed the electrophoretic separation and sensitive detection of all 20 essential amino acids in their underivatized cationic form. The addition of HEC to the BGE suppressed both, electroosmotic flow and analyte adsorption on the capillary surface resulting in an excellent migration time reproducibility and a very good analyte peak symmetry. Additionally, the HEC addition significantly reduced the noise and long-term fluctuations of the CCD baseline. The optimized electrophoretic separation method together with the CCD was proved to be a powerful technique for determination of amino acid profiles in various natural samples, like beer, yeast, urine, saliva, and herb extracts.

NMR detection with multiple solenoidal microcoils for continuous-flow capillary electrophoresis

Nuclear magnetic resonance (NMR) spectroscopy represents a promising on-line detector for capillary electrophoresis (CE). The inherent poor sensitivity of NMR mandates the use of NMR probes with the highest mass sensitivity, such as those containing solenoidal microcoils, for CE/NMR hyphenation. However, electrophoretic current degrades the resolution of NMR spectra obtained from solenoidal coils. A new method to avoid microcoil NMR spectral degradation during continuous-flow CE is demonstrated using a unique multiple solenoidal coil NMR probe. The electrophoretic flow from a single separation capillary is split into multiple outlets, each possessing its own NMR detection coil. While the CE electrophoretic flow is directed through one outlet, stopped-flow, high-resolution NMR spectra are obtained from the coil at the other outlet. The electrophoretic flow and NMR measurements are cycled between the outlets to allow a continuous CE separation with "stopped-flow" detection. As a new approach for improving multiple coil probe performance, the magnetic field homogeneity is automatically adjusted (via the shim coils of the magnet) for the active coil. The multiple microcoil CE/NMR coupling has been used to analyze a <3 nmole mixture of amines while obtaining between 1 and 2 Hz line width, demonstrating the ability to avoid electrophoretic current-induced line broadening.

Microscale NMR

NMR spectroscopy is increasingly being used to characterize microliter and smaller-volume samples. Substances at picomole levels have been identified using NMR spectrometers equipped with microcoil-based probes. NMR probes that incorporate multiple sample chambers enable higher-throughput NMR experiments. Hyphenation of capillary-scale separations and microcoil NMR has also decreased analysis time of mixtures. For example, capillary isotachophoresis/NMR allows the highest mass sensitivity nanoliter-volume flow cells to be used with low microliter volume samples because isotachophoresis concentrates the microliter volume sample into the nanoliter volume NMR detection probe. In addition, the diagnostic capabilities of NMR spectroscopy allow the physico-chemical aspects of a capillary separation process to be characterized on-line. Because of such advances, the application of NMR to smaller samples continues to grow.

Insights into the cITP process using on-line NMR spectroscopy

Recently, capillary isotachophoresis (cITP) has been coupled on-line with nuclear magnetic resonance (NMR) to enhance analysis of dilute charged analytes through sample concentration and separation. This study focuses on the unique detection capabilities of NMR to noninvasively examine the cITP process and obtain diagnostic information. With their enhanced mass sensitivity, microcoil NMR probes provide optimal detection for cITP/NMR. Whereas previous studies used deuterated buffers, a 1H NMR observable leading electrolyte, tetramethylammonium acetate, is employed here to better track cITP progression. Fortuitously, the 1H chemical shift of the acetate methyl resonance depends on pD. Hence, by using a calibration curve, the solution pD can be determined on-line during cITP. Similarly, intracapillary temperature can be measured in cITP/NMR by observing the HOD chemical shift. To obtain accurate chemical shift measurements, charge-neutral tert-butyl alcohol is added to all cITP electrolyte solutions as an internal reference. As an ancillary benefit, line width measurements of the ubiquitous tert-butyl alcohol enable NMR spectral resolution to be examined throughout the experiment. Capable of providing quantitative results, NMR simultaneously determines the concentrations of the leading ion, sample, and counterion over the course of the cITP experiment.

Capillary isotachophoresis/NMR: extension to trace impurity analysis and improved instrumental coupling

Building upon its promising initial performance, the online coupling of capillary isotachophoresis (cITP) to nuclear magnetic resonance (NMR) is extended to trace impurity analysis. By simultaneously concentrating and separating dilute charged species on the basis of their electrophoretic mobility, cITP greatly facilitates NMR structural elucidation. cITP/NMR appears particularly attractive for identifying trace charged synthetic and natural organic compounds obscured by large excesses of other components. A 9.4 microL injection of 200 microM (1.9 nmol) atenolol in a 1000-fold excess of sucrose (200 mM) is analyzed by cITP/NMR. A microcoil, the most mass sensitive NMR probe, serves as the detector as it provides optimal NMR observation of the capillary-scale separation. cITP successfully isolates the atenolol from the sucrose while concentrating it 200-fold to 40 mM before presentation to the 30 nL observe volume microcoil, thereby enabling rapid 1H NMR spectral acquisition of atenolol (experimental time of 10 s) without obstruction from sucrose. For this particular probe and sample, the stacking efficiency is near the theoretical limit as 67% of the sample occupies the 1 mm long microcoil during peak maximum. A multiple-coil probe with two serial 1 mm long microcoils arranged 1 cm apart has been developed to facilitate peak trapping and sample band positioning during cITP/NMR.

Recent advances in amino acid analysis by capillary electrophoresis

Amino acids are studied extensively using capillary electrophoresis. In this review we will report the different researchs which have been done in the literature since 1998. We will describe the developments of, detection methods, separations of enantiomers, the new medical applications, and amino acids in food and plants.

NMR spectroscopy in drug discovery: tools for combinatorial chemistry, natural products, and metabolism research

NMR spectroscopy has enjoyed many advances recently, and the pace of development shows no signs of slowing. This article focuses on advances that have affected solution-state NMR. These advances fall into three general categories: new experimental techniques (new pulse sequence tools), improved hardware and more powerful software. These advances are allowing NMR to help solve important problems in the field of drug discovery. Their impact is widespread. NMR spectroscopy is now being used to determine protein structures, to monitor ligand-receptor binding, to study diffusion, to analyze mixtures using LC-NMR, to analyze solid-phase synthesis resins and to determine the structures of organic small molecules. NMR spectroscopy can provide both qualitative and quantitative information, and can be used in both routine analytical applications and demanding research applications. The applications described here can benefit numerous disciplines in drug discovery, including natural products research, synthetic medicinal chemistry, metabolism studies, drug production, quality control, rational drug design and combinatorial chemistry.

Quantitative determination of L-arginine by enzymatic end-point analysis

An enzymatic end-point method for the quantitative determination of L-arginine was evaluated with samples of synthetic wine and natural grape juice. The enzymes arginase, urease, and glutamate dehydrogenase were used in this simple assay, similar to those described for many metabolites by Boehringer-Mannheim. In synthetic wine, recovery of L-arginine ranged between 98.3 and 104.4% and the precision as coefficient of variation was between 0.4 and 1.47% in the concentration range of the method, 0-100 mg/L L-arginine. The recovery of L-arginine in a grape juice with added L-arginine after clarification with polyvinylpolypyrrolidone ranged between 100 and 101.3%, and the coefficient of variation was 0.6%. The method has low material costs of approximately 0.43 U.S.$ per assay, and the time course of the reaction facilitates measurement of several samples concurrently. The results of this evaluation indicate that the enzymatic assay is a preferred method over colorimetric methods for the manual determination of L-arginine.

Sample stacking of cationic and anionic analytes in capillary electrophoresis

The behavior of charged species along concentration boundaries in capillary zone electrophoresis (CZE) that was first described in detail by Everaerts et al. in 1979 assured the possibility of concentrating charged solutes inside the capillary. The concentration effect is based on the sudden change in analyte electrophoretic velocity brought about by the difference in the magnitude of the electric field. Furthermore, this on-line method could be the needed solution to the problem of low concentration sensitivity in CZE. Sample stacking, which is now its well known name, has then found valuable use in applying CZE in many fields, especially after the in-depth studies performed in the early 90s by Chien and Burgi. This article reviews the theory and methodological developments of sample stacking developed for charged analytes in CZE and also in electrokinetic chromatography. A table conveying the reported applications especially in the biomedical and environmental fields is given. On top of this, other on-line concentration methods for charged species, namely, sample self-stacking, acetonitrile stacking, sweeping, cation selective exhaustive injection-sweeping, and use of a pH junction, are briefly discussed.

Voltammetry on microfluidic chip platforms

Microfluidic chip devices are shown to be attractive platforms for performing microscale voltammetric analysis and for integrating voltammetric procedures with on-chip chemical reactions and fluid manipulations. Linear-sweep, square-wave, and adsorptive-stripping voltammograms are recorded while electrokinetically "pumping" the sample through the microchannels. The adaptation of voltammetric techniques to microfluidic chip operation requires an assessment of the effect of relevant experimental variables, particularly the high voltage used for driving the electroosmotic flow, upon the background current, potential window, and size or potential of the voltammetric signal. The exact potential window of the chip detector is dependent upon the driving voltage. Manipulation of the electroosmotic flow opens the door to hydrodynamic modulation (stopped-flow) and reversed-flow operations. The modulated analyte velocity permits compensation of the microchip voltammetric background. Reversal of the driving voltage polarity offers extended residence times in the detector compartment. Rapid square-wave voltammetry/flow injection operation allows a detection limit of 2 x 10(-12) mol (i.e., 2 pmol) of 2,4,6-trinitrotoluene (TNT) in connection with 47 nL of injected sample. The ability of integrating chemical reactions with voltammetric detection is demonstrated for adsorptive stripping measurements of trace nickel using the nickel-dimethylglyoxime model system. The voltammetric response is characterized using catechol, hydrazine, TNT, and nickel as test species. The ability to perform on-chip voltammertic protocols in advantageous over nanovial voltammetric operations that lack a liquid-handling capability. Coupling the versatility of microfluidic chips with the rich information content of voltammetry thus opens an array of future opportunities.

Monitoring temperature changes in capillary electrophoresis with nanoliter-volume NMR thermometry

Nanoliter-volume proton nuclear magnetic resonance (NMR) spectroscopy is used to monitor the electrolyte temperature during capillary electrophoresis (CE). By measuring the shift in the proton resonance frequency of the water signal, the intracapillary temperature can be recorded noninvasively with subsecond temporal resolution and spatial resolution on the order of 1 mm. Thermal changes of more than 65 degrees C are observed under both equilibrium and nonequilibrium conditions for typical CE separation conditions. Several capillary and buffer combinations are examined with external cooling by both liquid and air convection. Additionally, NMR thermometry allows nonequilibrium temperatures in analyte bands to be monitored during a separation. As one example, a plug of 1 mM NaCl is injected into a capillary filled with 50 mM borate buffer. Upon reaching the NMR detector, the temperature in the NaCl band is more than 20 degrees C higher than the temperature in the surrounding buffer. Such observations have direct applicability to a variety of studies, including experiments which utilize sample stacking and isotachophoresis.

Detection in capillary electrophoresis

A review of the four major, on-line, capillary electrophoresis (CE) detection modalities is presented. It is shown that each detection method, fluorescence, absorbance (conventional and nonconventional), electrochemical and refractive index, have distinct advantages and limitations when applied to analysis in a CE format. Various aspects of CE detection are considered and a perspective regarding the applicability of the technique is provided. It is shown that because of widely varying detection limits (ranging from single molecule to 10(-5) M) and detection scheme complexity, the particular application should dictate the selection of detection methodology in CE.