Giant Rylene Imide-Based Electron Acceptors for Organic Photovoltaics

Photoinduced Cascading Charge Transfer in Perylene Bisimide-Based Triads

We synthesize three perylene bisimide-based triads with donor-acceptor-acceptor (D∼A₁-A₂) architectures, in which the distance between D and A₁ is varied to study its influence on the excited state electron processes. Very different intramolecular charge transfer (D⁺∼A₁-A₂^-) lifetimes in dichloromethane (DCM) for these three triads are revealed by steady-state and transient spectroscopies. Free-energy changes of charge transfer (CT) are calculated based on the single-crystal X-ray diffraction data and electrochemical measurements. The results show that photoinduced cascading CT comprises two competing processes in DCM (CTs in D∼A1 units and in A1-A2 units) by pumping of the A1 unit, and then the long-distance CT state is formed. The charge recombination (CR) process is restrained effectively by the increased distance between the anion and cation. This research reveals the importance of multistep cascading CTs on tuning the CT lifetime in multichromophoric systems.

"Spine Surgery" of Perylene Diimides with Covalent B-N Bonds toward Electron-Deficient BN-Embedded Polycyclic Aromatic Hydrocarbons

BN-embedded polycyclic aromatic hydrocarbons (PAHs) with unique optoelectronic properties are underdeveloped relative to their carbonaceous counterparts due to the lack of suitable and facile synthetic methods. Moreover, the dearth of electron-deficient BN-embedded PAHs further hinders their application in organic electronics. Here we present the first facile synthesis of novel perylene diimide derivatives (B₂N₂-PDIs) featuring n-type B-N covalent bonds. The structures of these compounds are fully confirmed through the detailed characterizations with NMR, MS, and X-ray crystallography. Further investigation shows that the introduction of BN units significantly modifies the photophysical and electronic properties of these B₂N₂-PDIs and is further understood with the aid of theoretical calculations. Compared with the parent perylene diimides (PDIs), B₂N₂-PDIs exhibit deeper highest occupied molecular orbital energy levels, new absorption peaks in the high-energy region, hypsochromic shift of absorption and emission maxima, and decrement of photoluminescent quantum yields. Single-crystal field-effect transistors based on B₂N₂-PDIs showcase an electron mobility up to 0.35 cm² V^-1 s^-1, demonstrating their potential application in optoelectronic materials.

Solvent effects on excited-state relaxation dynamics of paddle-wheel BODIPY-Hexaoxatriphenylene conjugates: Insights from non-adiabatic dynamics simulations

Understanding the excited state dynamics of donor-acceptor (D-A) complexes is of fundamental importance both experimentally and theoretically. Herein, we have first explored the photoinduced dynamics of a recently synthesized paddle-wheel BODIPY-hexaoxatriphenylene (BODIPY is the abbreviation for BF2-chelated dipyrromethenes) conjugates D-A complexes with the combination of both electronic structure calculations and non-adiabatic dynamics simulations. On the basis of computational results, we concluded that the BODIPY-hexaoxatriphenylene (BH) conjugates will be promoted to the local excited (LE) states of the BODIPY fragments upon excitation, which is followed by the ultrafast exciton transfer from LE state to charge transfer (CT). Instead of the photoinduced electron transfer process proposed in previous experimental work, such a exciton transfer process is accompanied with the photoinduced hole transfer from BODIPY to hexaoxatriphenylene. Additionally, solvent effects are found to play an important role in the photoinduced dynamics. Specifically, the hole transfer dynamics is accelerated by the acetonitrile solvent, which can be ascribed to significant influences of the solvents on the charge transfer states, i.e. the energy gaps between LE and CT excitons are reduced greatly and the non-adiabatic couplings are increased in the meantime. Our present work not only provides valuable insights into the underlying photoinduced mechanism of BH, but also can be helpful for the future design of novel donor-acceptor conjugates with better optoelectronic performance.

Structural symmetry-breaking of perylene diimide acceptor at N-position for enhanced photovoltaic performance

The vinylene-bridged helical perylene diimide dimer (PDI2) and derivatives have received considerable attention for application in nonfullerene organic solar cells (OSCs). Benefit from the large natural dipole moment and the...

A novel class of rigid-rod perylene diimides and isoindigo semiconducting polymers

Three novel rigid-rod semiconducting polymers containing fused electron-deficient PDI and IID units have been synthesized through aldol polymerization. Their unique opto-electronic properties have been investigated systematically.

Perylene Five-membered Ring Diimide for Organic Semiconductors and π-Expanded Conjugated Molecules

A perylene five-membered ring diimide PDI39 was developed as a new electron-deficient building block for n-type semiconductors. The π-expanded conjugated molecules entailing azulenes were synthesized from PDI39. These conjuagted molecules...

Rylene-Fullerene Hybrid an Emerging Electron Acceptor for High-Performing and Photothermal-Stable Ternary Solar Cells

Molecular carbon imides, especially extended perylene diimides (PDIs) have been the best wide-band-gap nonfullerene acceptors. Despite their excellent photothermal/chemical stability, flexible reaction sites, and unique photoelectronic properties, there is still a lack of fundamental understanding of their molecular characteristics as a third component. Here, generations of PDIs with distinctive molecular architecture, are deliberately screened out as the third component to PM6:Y6. Only a rylene-fullerene hybrid, S-Fuller-PMI, surprisingly boosts the fill factor (FF) of ternary organic solar cells (OSCs) to 0.77 from 0.72 for PM6:Y6 binary ones, and therefore the power conversion efficiency (PCE) of ternary cells is enhanced from 15.3% to 16.2%. Compared with highly-flexible rylene dimer and rigid multimer, S-Fuller-PMI exhibits higher electron mobility, favorable surface tension, and, therefore tailored compatibility with Y6. These formed Y6:S-Fuller-PMI alloys play as a morphological controller to improve charge separation and transport process. Simultaneously, the suppressed photothermal-induced traps, along with inherent enlarged entropy effect, endow the ternary OSCs still with ≈70% of initial PCE even after 500 h continuous illumination, whereas only 53% is left in their binary counterparts. These results provide new insight into the molecular design principle for distinctive molecular carbon imides as the third component for efficient and durable PM6:Y6-based OSCs.

Multiple [n]helicenes with various aromatic cores

Usually, multiple [n]helicene molecules have a characteristic aromatic core, such as benzene, naphthalene, pyrene, perylene, hexabenzocoronene, corannulene, or azacorannulene.

One-pot heteroannulation toward phosphaperylene diimides with high luminescence and out-of-plane anisotropy

This work presents a P-heteroannulation strategy on perylene diimides in one pot. The resulting phosphaperylene diimides demonstrate an out-of-plane dipole moment of 8.10 D and high fluorescence quantum yields of up to 94%.

Facile Azabenz-Annulations through UV-induced Photocyclization: A Promising Method for Perylenediimide-Based Organic Semiconductors

The derivatization of perylenediimides (PDIs) by bay decoration is essential for the development of PDI-based semiconductors owing to their excellent photoelectric properties. Herein, four bis-azabenz-annulated PDIs (bis-AzaBPDIs) are concisely synthesized in high yields through ultraviolet-induced photocyclization, where the reaction processes including aldimine condensation, cyclization, and oxidative re-aromatization are investigated. The optical characterizations and theoretical simulation reveal that the unique properties of the four bis-AzaBPDIs are comparable to their parent PDI. Organic field effect transistors with compounds 2, 3, or 4 as active layers indicated that all compounds showed unipolar electron transport properties with the mobilities of 1.1×10^-3 , 5.8×10^-4 , and 8.5×10^-6  cm²  V^-1  s^-1 , respectively. These results suggest the great potential of bis-AzaBPDIs as organic semiconductors. The easy preparation approach reported in this work would renew research interest in developing bis-AzaBPDI-based optoelectronic molecules.

Resonance-Enhanced Two-Photon Absorption and Optical Power Limiting Properties of Three-Dimensional Perylene Bisimide Derivatives

Push-pull organic structures characterized by an intramolecular charge transfer (ICT) process and π-electron delocalization are potentially interesting luminescent materials. A series of three-dimensional o-carborane-containing perylene bisimide derivatives (PBIs) were synthesized, and their optical properties were systematically investigated to illustrate the stereo effect, especially on the two-photon absorption (2PA) and optical power limiting (OPL) properties. Open-aperture Z-scan curves showed that all four PBIs displayed strong and broad two-photon absorptivities based on the resonance-enhanced phenomenon. The maximum degenerate two-photon absorption cross section (δ_2PA) increased with the number of PBI substituents. The derivative CB-PBI possessed a δ_2PA value of ∼2400 GM at 650 nm, a significant enhancement in comparison with that of the parent PBI (∼719 GM), ascribed to the present stereo effect. When the aromatic-donating units changed from naphthyl and pyrenyl to PBI, the generated multidimensional intramolecular charge transfer (ICT) from the aromatic units to the o-carborane cage contributed to the 2PA processes. All of the fluorophores exhibited excellent optical power limiting (OPL) performances as well as a minimum limiting threshold of ∼4.98 mJ/cm² for CB-PBI. These significant results not only allow us to get deep insight into the nature of the fundamental stereo effect and nonlinear optical (NLO) response involved but also guide us toward the design of new multifunctional luminescent materials.

Electronic Structure and Excited-State Dynamics of Rylene-Tetrapyrrole Panchromatic Absorbers

Panchromatic absorbers have potential applications in molecular-based energy-conversion schemes. A prior porphyrin-perylene dyad (P-PMI, where "MI" denotes monoimide) coupled via an ethyne linker exhibits panchromatic absorption (350-700 nm) and a tetrapyrrole-like lowest singlet excited state with a relatively long singlet excited-state lifetime (τ_S) and increased fluorescence quantum yield (Φ_f) versus the parent porphyrin. To explore the extension of panchromaticity to longer wavelengths, three arrays have been synthesized: a chlorin-terrylene dyad (C-TMI), a bacteriochlorin-terrylene dyad (B-TMI), and a perylene-porphyrin-terrylene triad (PMI-P-TMI), where the terrylene, a π-extended homologue of perylene, is attached via an ethyne linker. Characterization of the spectra (absorption and fluorescence), excited-state properties (lifetime, yields, and rate constants of decay pathways), and molecular-orbital characteristics reveals unexpected subtleties. The wavelength of the red-region absorption band increases in the order C-TMI (705 nm) < PMI-P-TMI (749 nm) < B-TMI (774 nm), yet each array exhibits diminished Φ_f and shortened τ_S values. The PMI-P-TMI triad in toluene exhibits Φ_f = 0.038 and τ_S = 139 ps versus the all-perylene triad (PMI-P-PMI) for which Φ_f = 0.26 and τ_S = 2000 ps. The results highlight design constraints for auxiliary pigments with tetrapyrroles to achieve panchromatic absorption with retention of viable excited-state properties.

Imide-Functionalized Helical PAHs: A Step towards New Chiral Functional Materials

Attachment of cyclic imide groups to polycyclic aromatic hydrocarbons (PAHs) leads to fascinating electronic and luminescence properties, with rylene diimides being a representative example. The close to unity fluorescence quantum yields and electron-acceptor properties render them suitable for application in organic electronics and photovoltaics. Recent reports show that, in line with planar PAHs, the imide functionalization has also endowed helical three-dimensional PAHs with similar beneficial photophysical properties. In this article, we have summarized the state-of-the-art research developments in the field of helicene–imide hybrid functional molecules, with a particular focus on synthesis, (chir)optical and redox properties, and applications in electronics. Additionally, we have highlighted our recent work, introducing a novel family of functional chiral molecules, namely, [n]helicene diimides, as three-dimensional relatives of rylene diimides.

Layer-by-Layer Solution-Processed Organic Solar Cells with Perylene Diimides as Acceptors

Layer-by-layer (LBL) sequential solution processing of the active layer has been proven as an effective strategy to improve the performance of organic solar cells (OSCs), which could adjust vertical phase separation and improve device performance. Although perylene diimide (PDI) derivatives are typical acceptors with excellent photoelectric properties, there are few studies on PDI-based LBL OSCs. Herein, three PDI acceptors (TBDPDI-C₅, TBDPDI-C₁₁, and SdiPDI) were used to fabricate LBL and bulk heterojunction (BHJ) OSCs, respectively. A series of studies including device optimization, photoluminescence (PL) quenching, dependence of light intensity, carrier mobility, atomic force microscopy (AFM), transmission electron microscopy (TEM), grazing-incidence wide-angle X-ray scattering (GIWAXS), and depth analysis X-ray photoelectron spectroscopy (DXPS) were carried out to make clear the difference of the PDI-based LBL and BHJ OSCs. The results show that LBL OSCs possess better charge transport, higher and more balanced carrier mobility, less exciton recombination loss, more favorable film morphology, and proper vertical component distribution. Therefore, all the three PDI acceptor-based LBL OSCs exhibit higher performance than their BHJ counterparts. Among them, TBDPDI-C₅ performs best with a power conversion efficiency of 6.11% for LBL OSCs, higher than its BHJ OSC (5.14%). It is the first time for PDI small molecular acceptors to fabricate high-efficiency OSCs by using an LBL solution-processed method.

Double-Cable Conjugated Polymers with Pendant Rylene Diimides for Single-Component Organic Solar Cells

ConspectusConjugated polymers for application in organic solar cells (OSCs) have been developed from poly(phenylenevinylene) to poly(3-hexylthiophene) and then to "donor-acceptor" structures, providing power conversion efficiencies (PCEs) over 18% when blending with the electron acceptor as a two-component photoactive layer. Besides, graft-structural double-cable conjugated polymers that use an electron donor as conjugated backbones and an electron acceptor as pendant side units are one kind of conjugated polymer, in which charge carriers are generated in a single polymer. Therefore, double-cable conjugated polymers can be used as a single photoactive layer in single-component OSCs (SCOSCs). The covalently linked electron donor and acceptor enable double-cable polymers to maintain stable microstructures during long-term operation compared to two-component systems, which is very important for OSCs toward large-area applications. However, SCOSCs based on double-cable conjugated polymers provided PCEs below 3% in a long period, which is lagging far behind PCEs of two-component OSCs. The key reason for this is the limited number of chemical structures and the difficulty to tune the morphology in these polymers.In this Account, we provide an overview about our efforts on developing new double-cable conjugated polymers with rylene diimides as side units, and how to realize high PCEs in SCOSC devices. The studies start from developing a "functionalization-polymerization" method to synthesize the polymers containing rylene diimide acceptors, so that large amounts of double-cable conjugated polymers with distinct physical and electrochemical properties were obtained. Then, we will discuss how to control the nanophase separation in the crystalline region and optimize the miscibility in the amorphous region of double-cable polymers, simultaneously facilitating exciton dissociation and charge transport. With these efforts, a high PCE of 8.4% has been obtained, representing the record PCE in SCOSCs. In addition, the physical process and the stability of SCOSCs will be discussed. We hope that this account will inspire many innovative studies in this field and push the PCEs of SCOSCs to a new stage.

Revisiting Acepleiadylene: Two-Step Synthesis and π-Extension toward Nonbenzenoid Nanographene

Acepleiadylene (APD), a nonbenzenoid nonalternant isomer of pyrene, exhibits different electronic properties from pyrene, but has been rarely studied since its first synthesis in 1956, probably due to the difficulties in synthesis and further derivatization. In this work, we revisited this long-known compound and developed a new two-step synthetic route to efficiently access APD on the gram scale. Theoretical and experimental characterizations elucidated the unique properties of APD as compared with its benzenoid isomer pyrene, particularly revealing its dipolar structure with a narrow optical gap. The functionalization of APD was demonstrated for the first time, providing doubly brominated APD as a key precursor for further π-extension. As a proof of concept, a π-extended APD and a cyclotrimer nanographene (C₄₈H₂₄) were constructed, opening up new avenues to nonbenzenoid nanographenes with low HOMO-LUMO gaps.

Coexistence of Parallel and Rotary Stackings in the Lamellar Crystals of a Perylene Bisimide Dyad for Temperature-Sensitive Bicomponent Emission

Coexistence of rotationally π-π stacked columns and discrete slip-stacked dimers of perylene bisimide (PBI) chromophores is revealed by single crystal X-ray diffraction in the lamellar crystal of a head-to-tail linked PBI dyad. The rotary π-π stacked columnar moieties show H-type spectral character with relatively higher excitation energy, while the discrete slip-stacked π-π dimers have J-type spectral behavior with lower excitation energy. The lamellar crystals show relatively low photoluminescence efficiency of 12% at room temperature, while this dramatically increases to ∼90% at low temperature (80 K). Both of the rotary and slip-stacked moieties are emissive, and the nonradiative energy transfer processes between them are suppressed at low temperature, ensuring the highly efficient excimer-like long-lived fluorescence.