Single Molecule Photocatalysis on TiO2 Surfaces

Construction of a hierarchical ZnIn2S4/C3N4 heterojunction for the enhanced photocatalytic degradation of tetracycline

Efficient charge separation and sufficiently exposed active sites are both critical limiting factors for solar-driven organic contaminant degradation. Herein, we describe a hierarchical heterojunction photocatalyst fabricated by the in situ growth of ZnIn₂S₄ nanosheets on micro-tubular C₃N₄ (denoted as ZIS/TCN). This ZIS/TCN heterojunction photocatalyst can take advantage of the hollow structure with stronger light absorption capacity and more active sites, and its heterostructure can accelerate the separation and transfer of photogenerated charge carriers. The optimized ZIS/TCN-3 exhibits superb photocatalytic efficiency for the degradation of tetracycline (86.1%, 60 min), maintains excellent stability and recyclability, and provides a facile strategy for the synthesis of efficient heterojuction photocatalysts towards wastewater treatment. In addition, the plausible photocatalytic degradation pathway of tetracycline is proposed according to the intermediates identified by LC-mass analysis.

Developing Atomically Thin Li1.81H0.19Ti2O5·2H2O Nanosheets for Selective Photocatalytic CO2 Reduction to CO

Solar-driven CO₂ conversion to carbon-based fuels is an attractive approach to alleviate the worsening global climate change and increasing energy issues. However, exploring and designing efficient photocatalysts with excellent activity and stability still remain challenging. Herein, layered Li_1.81H_0.19Ti₂O₅·2H₂O (LHTO) nanosheets were explored as the photocatalyst for photocatalytic CO₂ reduction, and atomically thin LHTO nanosheets with one-unit-cell thickness were successfully constructed for photocatalytic CO₂ reduction. The atomically thin LHTO nanosheets exhibited excellent performance for CO₂ photoreduction to CO, with a yield rate of 4.0 μmol g^-1 h^-1, a selectivity of 93%, and over 25 h photostability, dramatically outperforming the bulk LHTO. The better performance of the atomically thin LHTO nanosheets was experimentally verified to benefit from more sites for CO₂ adsorption, faster electron transfer rate, and a more negative conduction band edge compared with bulk LHTO. This work provided a methodological basis for designing more efficient photocatalytic CO₂ reduction catalysts.

A photo-responsive p-Si/TiO2/Ag heterostructure with charge transfer for recyclable surface-enhanced Raman scattering substrates

A Si/TiO2/Ag heterostructure is prepared as a recyclable SERS substrate with EF of 1.23 × 1012 and excellent repeatability, which can boost performance effectively by the synergistic contribution of the EM and CT enhancement effects.

Surface Enriching Promotes Decomposition of Benzene from Air

The low generation rate and short lifetime of reactive oxidation radicals typical like ·OH strictly limit the photocatalytic degradation of benzene in the air. Here, we adopt copper dopant to...

Degradation of formaldehyde aqueous solution by Bi based catalyst and its activity evaluation

Bi based catalysts have attracted continuous attention from the scientific community because of their excellent photochemical properties and wide application in photocatalytic treatment of environmental pollution. A series of Bi based catalysts with good crystallinity and high purity were prepared by calcination and hydrothermal synthesis. In the application of degrading formaldehyde aqueous solution in a mercury lamp and xenon lamp atmosphere, it was found that BiVO₄ and Bi₂WO₆ showed excellent photochemical properties under ultraviolet and visible light. The tests of PL, UV-Vis and EIS confirmed their high activity. In the calculation based on density functional theory (DFT), through the analysis of the energy band structure, density of states (DOS) and partial wave density of states (PDOS), it is found that the d orbital of V and W elements has a great influence on the position and size of the energy band of the catalyst, which makes it have high activity and excellent electrochemical properties.

Bi based catalysts have attracted continuous attention from the scientific community because of their excellent photochemical properties and wide application in photocatalytic treatment of environmental pollution.

An effective CuO/Bi2WO6 heterostructured photocatalyst: Analyzing a charge-transfer mechanism for the enhanced visible-light-driven photocatalytic degradation of tetracycline and organic pollutants

Over the past few years, industrial pollution has had a negative impact on aquatic life by releasing significant amounts of hazardous chemicals into the ecosystem. Therefore, it is imperative to develop photocatalytic materials with good photocatalytic activity and easy separation. Photocatalytic degradation has been employed for the removal of such contaminants using binary hybrid nanocomposites as photocatalysts. In the present study, binary CuO/Bi₂WO₆ (CuBW) nanocomposites with different loadings of Bi₂WO₆ (~5, 10, and 15 mg) were successfully constructed using a simple hydrothermal method and used as a potential photocatalyst for the degradation of tetracycline (TC) and methylene blue (MB) under visible-light irradiation. The structure, surface morphology, and optical properties were studied to investigate the formation of the heterostructure. Among the prepared samples, the CuBW nanocomposite containing the optimum content of Bi₂WO₆ (~10 mg) exhibited superior activity toward the photocatalytic degradation of TC (97.72%) in 75 min and MB (99.43%) in 45 min under visible-light illumination. Radical trapping experiments suggested that holes and •OH radicals were the dominant reactive species during the photocatalytic process. The photoelectrochemical results also confirmed the improved separation and transfer of electron-hole pairs at the interface of Bi₂WO₆ and CuO. Our results demonstrate that the binary CuO/Bi₂WO₆ nanocomposite has significant potential applications in the field of photocatalysis due to its enhanced separation of the photoexcited charge carriers and strong synergistic interactions.

Evaluation of Ag@TiO2/WO3 heterojunction photocatalyst for enhanced photocatalytic activity towards methylene blue degradation

Methylene blue is a dye that is extensively used in the textile industry but it is a hazardous, carcinogenic, and mutagenic pollutant. Therefore, the treatment of wastewater containing methylene blue by photocatalytic degradation under visible light without using any sacrificial agent (H₂O₂) is an important method towards attaining an eco-friendly environment. Herein, the nanocomposite of Ag-doped TiO₂ on WO₃ nanoparticles (Ag@TiO₂/WO₃) was prepared by a modified sol-gel precipitation route, and their physicochemical properties were studied. The bandgap of Ag sensitized metal oxide nanocomposite in Ag@TiO₂/WO₃ was slightly reduced compared to the pristine titania due to the creation of interstitial energy states during colligation of titania and tungsten oxide. The ease of charge carrier transfers through the heterojunction of TiO₂/WO₃ increased the photocatalytic activity of the photocatalyst. Furthermore, in Ag@TiO₂/WO₃ the plasmonic Ag sensitization to the host semiconductor TiO₂ has further boosted the rate of photocatalytic degradation because of the surface plasmon resonance (SPR) and hindrance of charge carrier recombination. Due to the synergistic effect of SPR and the presence of heterojunction in Ag@TiO₂/WO₃, the photocatalytic activity was found to be 25 times higher for Ag@TiO₂/WO₃ than that of commercial DP25 photocatalyst under visible light towards methylene blue degradation.

Anisotropic d-d Transition in Rutile TiO2

The band gap state of TiO₂, which is dominated by Ti³⁺ 3d character, is of great relevance to light absorption, electron trapping, charge recombination, and conduction band structure. Despite the importance, the explanation of the excitation from this state is controversial. To this end, the electronic structures of TiO₂(110) and TiO₂(011)-(2 × 1) have been systematically measured with two-photon photoemission spectroscopy. The results reveal the anisotropic nature of the electronic structure in rutile TiO₂ at seemingly equivalent directions of [110] and [11̅0], the long axes of the TiO₆ blocking unit. Although the resonant energy of these two d-d transitions is identical, the energy levels are systematically shifted by 0.1 eV. We propose this anisotropy originates from the broken symmetry of the rutile TiO₂ crystals caused by the surface. The proposed asymmetry-caused electronic structure anisotropy could be generalized to other similar materials and may affect associated catalytic properties. This work provides an important benchmark for related calculations.

The 50 Most Highly Cited Reviews of 2013–2017

The main characteristics of the 50 most highly cited reviews based on Scopus data, published in 2013–2017, have been studied. A detailed analysis of these reviews is given in terms of topic relevance, authors’ team authority, and sources rating. The majority of reviews were for medicine, chemistry, biochemistry, genetics, and molecular biology. Many of them were written with the participation of an authoritative expert group from the world’s leading scientific institutions as a regularly updated result review. The largest numbers of authors belonged to the G7 countries, China, and Switzerland. In comparison with these reviews, the Russian practice of preparing review publications has been considered.

Oxygen-Vacancy-Driven Orbital Reconstruction at the Surface of TiO2 Core-Shell Nanostructures

Oxygen vacancies and their correlation with the electronic structure are crucial to understanding the functionality of TiO₂ nanocrystals in material design applications. Here, we report spectroscopic investigations of the electronic structure of anatase TiO₂ nanocrystals by employing hard and soft X-ray absorption spectroscopy measurements along with the corresponding model calculations. We show that the oxygen vacancies significantly transform the Ti local symmetry by modulating the covalency of titanium-oxygen bonds. Our results suggest that the altered Ti local symmetry is similar to the C_3v, which implies that the Ti exists in two local symmetries (D_2d and C_3v) at the surface. The findings also indicate that the Ti distortion is a short-range order effect and presumably confined up to the second nearest neighbors. Such distortions modulate the electronic structure and provide a promising approach to structural design of the TiO₂ nanocrystals.

Recent Progress in the Chemical Upcycling of Plastic Wastes

The massive generation of plastic wastes without satisfactory treatment has induced severe environmental problems and gained increasing attentions. In this Minireview, recent progresses in the chemical upcycling of plastic wastes by using various methods (mainly in the past three to five years) is summarized. The chemical upcycling of plastic wastes points out a "plastic-based refinery" concept, which is to use the plastic wastes as platform feedstocks to produce highly valuable monomeric or oligomeric compounds, putting the plastic wastes back into a circular economy. The different chemical methods to upcycle plastic wastes, including hydrogenolysis, photocatalysis, pyrolysis, solvolysis, and others, are introduced in each section to valorize diverse plastic feedstocks into value-added chemicals, materials, or fuels. In addition, other emerging technologies as well as the new generation of plastic thermosets are covered.

Rich oxygen vacancies, mesoporous TiO2 derived from MIL-125 for highly efficient photocatalytic hydrogen evolution

Here we report a mesoporous TiO₂ with a large specific surface area and rich oxygen vacancies using a Ti-based MOF (MIL-125) as a precursor through high-temperature annealing. Such integration of a unique mesoporous structure and oxygen vacancies provides effective carrier transport channels, increases surface active sites, and enhances photocatalytic activity for the hydrogen evolution reaction.

Turn-On Photocatalysis: Creating Lone-Pair Donor-Acceptor Bonds in Organic Photosensitizer to Enhance Intersystem Crossing

There is growing interest in developing triplet photosensitizers in terms of implementing photochemical strategies in synthetic chemistry. However, synthesis of stable triplet organic photosensitizers is nontrivial and often requires the use of heavy atoms. Herein, an alternative strategy is demonstrated to enhance the triplet generation efficiency by implanting lone-pair donor-acceptor bonds in the conjugated covalent organic frameworks (COFs). This powerful method is validated using COFs that host triazine, a moiety that has been extensively investigated in photocatalysis. Spectroscopic analysis and theoretical calculations reveal substantial improvements in the photoabsorptivity and triple-state photogeneration efficiency, consistent with catalytic tests concerning industrially relevant sulfide oxidation. These systems represent a promising addition to the rapidly increasing arsenal of synthetic photocatalytic systems.

Photothermal-assisted triphase photocatalysis over a multifunctional bilayer paper

Photocatalysis as one of the future environment technologies has been investigated for decades. Despite great efforts in catalyst engineering, the widely used powder dispersion and photoelectrode systems are still restricted by sluggish interfacial mass transfer and chemical processes. Here we develop a scalable bilayer paper from commercialized TiO 2 and carbon nanomaterials, self-supported at gas-liquid-solid interfaces for photothermal-assisted triphase photocatalysis. The photogeneration of reactive oxygen species can be facilitated through fast oxygen diffusion over triphase interfaces, while the interfacial photothermal effect promotes the following free radical reaction for advanced oxidation of phenol. Under full spectrum irradiation, the triphase system shows 13 times higher reaction rate than diphase controlled system, achieving 88.4% mineralization of high concentration phenol within 90 min full spectrum irradiation. The bilayer paper also exhibits high stability over 40 times cycling experiments and sunlight driven feasibility, showing potentials for large scale photocatalytic applications by being further integrated into a triphase flow reactor.

Conversion of Polyethylene Waste into Gaseous Hydrocarbons via Integrated Tandem Chemical-Photo/Electrocatalytic Processes

The chemical inertness of polyethylene makes chemical recycling challenging and motivates the development of new catalytic innovations to mitigate polymer waste. Current chemical recycling methods yield a complex mixture of liquid products, which is challenging to utilize in subsequent processes. Here, we present an oxidative depolymerization step utilizing diluted nitric acid to convert polyethylene into organic acids (40% organic acid yield), which can be coupled to a photo- or electrocatalytic decarboxylation reaction to produce hydrocarbons (individual hydrocarbon yields of 3 and 20%, respectively) with H₂ and CO₂ as gaseous byproducts. The integrated tandem process allows for the direct conversion of polyethylene into gaseous hydrocarbon products with an overall hydrocarbon yield of 1.0% for the oxidative/photocatalytic route and 7.6% for the oxidative/electrolytic route. The product selectivity is tunable with photocatalysis using TiO₂ or carbon nitride, yielding alkanes (ethane and propane), whereas electrocatalysis on carbon electrodes produces alkenes (ethylene and propylene). This two-step recycling process of plastics can use sunlight or renewable electricity to convert polyethylene into valuable, easily separable, gaseous platform chemicals.

Cooperative Motion in Water-Methanol Clusters Controls the Reaction Rates of Heterogeneous Photocatalytic Reactions

Detailed information about the influences of the cooperative motion of water and methanol molecules on practical solid-liquid heterogeneous photocatalysis reactions is critical for our understanding of photocatalytic reactions. The present work addresses this issue by applying operando nuclear magnetic resonance (NMR) spectroscopy, in conjunction with density functional theory (DFT) calculations and ab initio molecular dynamics (AIMD) simulations, to investigate the dynamic behaviors of heterogeneous photocatalytic systems with different molar ratios of water to methanol on rutile-TiO₂ photocatalyst. The results demonstrate that methanol and water molecules are involved in the cooperative motions, and the cooperation often takes the form of methanol-water clusters that govern the number of methanol molecules reaching to the active sites of the photocatalyst per unit time, as confirmed by the diffusion coefficients of the methanol molecule calculated in the binary methanol-water solutions. Nuclear Overhauser effect spectroscopy experiments reveal that the clusters are formed by the hydrogen bonding between the -OH groups of CH₃OH and H₂O. The formation of such methanol-water clusters is likely from an energetic standpoint in low-concentration methanol, which eventually determines the yields of methanol reforming products.

NaI/PPh3-Mediated Photochemical Reduction and Amination of Nitroarenes

A mild transition-metal- and photosensitizer-free photoredox system based on the combination of NaI and PPh₃ was found to enable highly selective reduction of nitroarenes. This protocol tolerates a broad range of reducible functional groups such as halogen (Cl, Br, and even I), aldehyde, ketone, carboxyl, and cyano. Moreover, the photoredox catalysis with NaI and stoichiometric PPh₃ provides also an alternative entry to Cadogan-type reductive amination when o-nitrobiarenes were used.

Water Splitting Induced by Visible Light at a Copper-Based Single-Molecule Junction

Water splitting is an essential process for converting light energy into easily storable energy in the form of hydrogen. As environmentally preferable catalysts, Cu-based materials have attracted attention as water-splitting catalysts. To enhance the efficiency of water splitting, a reaction process should be developed. Single-molecule junctions (SMJs) are attractive structures for developing these reactions because the molecule electronic state is significantly modulated, and characteristic electromagnetic effects can be expected. Here, water splitting is induced at Cu-based SMJ and the produced hydrogen is characterized at a single-molecule scale by employing electron transport measurements. After visible light irradiation, the conductance states originate from Cu/hydrogen molecule/Cu junctions, while before irradiation, only Cu/water molecule/Cu junctions were observed. The vibration spectra obtained from inelastic electron tunneling spectroscopy combined with the first-principles calculations reveal that the water molecule trapped between the Cu electrodes is decomposed and that hydrogen is produced. Time-dependent and wavelength-dependent measurements show that localized-surface plasmon decomposes the water molecule in the vicinity of the junction. These findings indicate the potential ability of Cu-based materials for photocatalysis.

One-Pot Synthesis of Schiff Bases by Defect-Induced TiO2-x-Catalyzed Tandem Transformation from Alcohols and Nitro Compounds

Schiff bases that are generally formed from condensation reactions of aldehydes (or ketones) and amino groups could also be produced by a photodriven one-pot tandem reaction between alcohols and nitro compounds, in our case. Herein, TiO_2-x porous cages derived from NH₂-MIL-125 by a self-sacrificing template route are used to study the organic transformation and exhibit 100% conversion efficiency of nitrobenzene and 100% selectivity for Schiff bases in the system of benzyl alcohol (5 mL) and nitrobenzene (41 μL) upon light irradiation, but hydrogen by dehydrogenation of benzyl alcohol cannot be detected. Successful occurrence of the organic transformation is mainly attributed to Ti(III)-oxygen vacancy associates. Surface oxygen vacancy-related Ti(III) sites are responsible for binding with nitro groups, and low-coordinated Ti_5c sites selectively adsorb hydroxyl groups of benzyl alcohol. The Ti(III) and oxygen vacancy associates capture photogenerated electrons for achievement of multielectron reduction of nitrobenzene and the subsequent Schiff base condensation reaction with the as-formed benzaldehyde.

Photoinduced Strong Metal-Support Interaction for Enhanced Catalysis

Strong metal-support interaction (SMSI) construction is a pivotal strategy to afford thermally robust nanocatalysts in industrial catalysis, but thermally induced reactions (>300 °C) in specific gaseous atmospheres are generally required in traditional procedures. In this work, a photochemistry-driven methodology was demonstrated for SMSI construction under ambient conditions. Encapsulation of Pd nanoparticles with a TiO_x overlayer, the presence of Ti³⁺ species, and suppression of CO adsorption were achieved upon UV irradiation. The key lies in the generation of separated photoinduced reductive electrons (e^-) and oxidative holes (h⁺), which subsequently trigger the formation of Ti³⁺ species/oxygen vacancies (O_v) and then interfacial Pd-O_v-Ti³⁺ sites, affording a Pd/TiO₂ SMSI with enhanced catalytic hydrogenation efficiency. The as-constructed SMSI layer was reversible, and the photodriven procedure could be extended to Pd/ZnO and Pt/TiO₂.

In situ chloride-mediated synthesis of TiO2 thin film photoanode with enhanced photoelectrochemical activity for carbamazepine oxidation coupled with simultaneous cathodic H2 production and CO2 conversion to fuels

This study investigated the simultaneous photoelectrochemical (PEC) degradation of carbamazepine (CBZ), reduction of CO₂ and production of H₂ using a TiO₂ thin film as photoanode and Ag plate as cathode. The photoanode was fabricated using sequential hydrothermal and calcination processes. The use of chloride during the hydrothermal process enhanced formation of oxygen vacancies and defects on the TiO₂ surface. Calcination not only further strengthened those features but also enhanced the crystallinity and anatase/rutile ratio, endowing the TiO₂ photoanode with superior PEC capacity. Characterization of physicochemical and PEC properties revealed that photogenerated electrons-holes were rapidly generated and efficiently separated on the TiO₂ surface during the PEC process. Hydroxyl radicals were the main active species responsible for anodic oxidation of carbamazepine, while hydrogen radicals and carbon dioxide radical anions mediated CO₂ reduction and H₂ production in the cathodic process. This work confirms the suitability of the prepared TiO₂ photoanode for PEC degradation of organic pollutants coupled with CO₂ reduction and H₂ production.

Rational synthesis and lithium storage properties of hierarchical nanoporous TiO2(B) assemblies with tailored crystallites and architectures

In comparison to the common anatase, rutile and brookite phases, the bronze phase TiO₂ (TiO₂(B)) is rarely prepared, and obtaining unique TiO₂(B) structures, especially those with complex configurations remains a great challenge. This work presents a completely new synthetic approach for fabricating hierarchical nanoporous TiO₂(B) assemblies with tailored crystallites and architectures via the reaction between tetrabutyl titanate and normal fatty acids. Three different kinds of normal fatty acids, i.e., pentanoic acid, hexanoic acid, and nonanoic acid were utilized as the sole solvent. After a simple solvothermal treatment, nanoporous TiO₂(B) microspheres constructed by [001]-elongated ultrathin nanorods, randomly aggregated ultrafine nanocrystals, and crystallographically oriented nanocrystals were successfully produced separately. Further investigation revealed that the morphology of the hierarchical assemblies could be modified by using foreign substrates to adjust the growth dynamics of TiO₂(B) crystals. As a good illustration, by introducing graphene nanosheets into the tetrabutyl titanate-pentanoic acid system, nanosized [001]-elongated-ultrathin-nanorod-constructed nanoporous TiO₂(B) assemblies were obtained, which exhibited superior performance as an anode in Li-ion batteries. This work can not only shed new light on TiO₂(B) crystallization, but also provide an effective solution for the rational design of complex TiO₂(B) micro-/nanoarchitectures for desired applications.

Rutile TiO2 single crystals delivering enhanced photocatalytic oxygen evolution performance

Owing to their scientific and technological importance, the development of highly efficient photocatalytic water oxidation systems with rapid photogenerated charge separation and high surface catalytic activity is highly desirable for the storage and conversion of solar energy. A promising candidate is rutile phase titanium dioxide (TiO2), which has been widely studied over half a century. Specifically, oriented single-crystalline TiO2 surfaces with high oxidative reactivity would be most desirable, but achieving these structures has been limited by the availability of synthetic techniques. In this study, a facile and green synthetic approach was developed for the first time to synthesize rutile TiO2 single crystals with regulable reductive and oxidative facets. Glycolic acid (GA) and sodium fluoride (NaF) are used as the crucial and effective phase and facet controlling agents, respectively. The selective adsorption of F- ions on the facets of rutile TiO2 crystals not only plays a key role in driving the nucleation and preferential growth of the crystals with desired facets but also significantly affects their photocatalytic gas evolution reactivity. With heat treatment, the highly stable F--free rutile TiO2 single crystals with a high percentage of oxidative facets exhibit a superior photocatalytic gas evolution rate (≈116 μmol h-1 per 0.005 g catalyst), 8.5 times higher than that of previous F--containing samples.

The effect of Cu dopants on electron transfer to O2 and the connection with acetone photocatalytic oxidations over nano-TiO2

Modifying TiO₂ with the Cu element has been shown to be useful for photocatalysis. Although it had been known that Cu species could trap electrons from TiO₂, whether they can affect the kinetics of electron transfer and how this can contribute to photocatalysis still remain unknown. In the current research, Cu-TiO₂ samples were firstly prepared with a hydrothermal reaction and characterized in detail. It was shown that Cu elements were doped in the TiO₂ lattice in +1/0 valence states and have a minor effect on the TiO₂ structure. By means of photoconductances, it is shown that the Cu dopants could catalyze the electron transfer from TiO₂ to O₂ by reducing the apparent activation energy (E_app) by about 2 times. The photocatalytic experiments conducted at different temperatures showed that the E_app of the acetone photocatalytic oxidations could be decreased by ∼2 times; this implies that the Cu dopants change the photocatalytic pathway. First-principles computation showed that the surface Cu dopants, along with the compensated oxygen vacancies, can mediate both of the electron and hole transfer. By combining other studies, we proposed that the Cu sites could act as Lewis acid and base pairs that could combine with acetone and O₂ molecules under UV light illumination; this allows electron transfer to O₂via the Cu sites that then react with acetone. As compared to pure TiO₂ surfaces, the different chemical environment of the Cu sites leads to the decrease in the E_app of photocatalysis.

Refine the crystallinity of upconversion nanoparticles for NIR-enhanced photocatalysis

A new photocatalyst was synthesized by a combination of the upconversion nanoparticle NaYF4:Yb, Tm, Gd (NYTG) and NH2-MIL-101(Cr) (NMC) to form NYTG/NMC.

Design of charge transfer channels: defective TiO2/MoP supported on carbon cloth for solar-light-driven hydrogen generation

We successfully integrated MoP and TiO₂ on flexible carbon cloth (CC) to construct a panel photoreactor with efficient charge transfer channels, where CC acts as an electron collector and guides directional migration of electrons (TiO₂ → MoP → CC).

Characterizing photocatalysts for water splitting: from atoms to bulk and from slow to ultrafast processes

This review provides a comprehensive overview on characterisation techniques for light-driven redox-catalysts highlighting spectroscopic, microscopic, electrochemical and spectroelectrochemical approaches.

Autocatalytic deoximation reactions driven by visible light

Photocatalytic deoximation reaction was found to be an autocatalytic process that occurs via free-radical mechanism. Understanding the mechanism may help chemical engineers to develop related techniques to avoid the decomposition of oximes.

Surface domain heterojunction on rutile TiO2 for highly efficient photocatalytic hydrogen evolution

Compared with the highly active anatase TiO2, rutile TiO2 usually presents poor photocatalytic performance due to high electron-hole recombination. Herein, we propose a surface domain heterojunction (SDH) structure between adjacent micro-domains with and without chemisorbed chlorine on rutile TiO2, which utilizes the potential difference between these domains to form a built-in field that promotes charge separation. Single-crystal rutile TiO2 nanorods assembled into radial microspheres with SDHs were fabricated, and these exhibited excellent solar-driven photocatalytic hydrogen evolution, ∼8-fold higher than that of the pristine one. Experimental results and density functional theory calculations reveal that the exceptional photocatalytic performance can be attributed to the in situ formation of chemisorbed chlorine, which forms SDHs that separate electrons and holes efficiently and results in surface reconfiguration, exposing the tri-active sites, increasing the O-site active centers and enhancing the catalytic activity of the 4-coordinated (Ti4c) and 5-coordinated Ti sites (Ti5c). This SDH strategy can extend to other halogen elements and thus provides an universal approach for the rational design of high-efficiency TiO2 photocatalysts toward sustainable solar-fuel evolution.

Observation of Molecular Hydrogen Produced from Bridging Hydroxyls on Anatase TiO2(101)

Anatase TiO₂ is used extensively in a wide range of catalytic and photocatalytic processes and is a promising catalyst for hydrogen production. Here, we show that molecular hydrogen was produced from bridging hydroxyls (HO_b) on the (101) surface of single-crystal anatase (TiO₂(101)). This stands in contrast to rutile TiO₂(110), where HO_b pairs react to form H₂O. Electron bombardment at 30 K produced bridging oxygen vacancies in the surface. Deuterated bridging hydroxyls (DO_b) were subsequently formed via dissociation of adsorbed D₂O and confirmed by infrared reflection-absorption spectroscopy. During temperature-programmed desorption (TPD) spectroscopy, D₂ desorption was observed at 520 K. Density functional theory calculations show that both H₂ and H₂O production from HO_b are endothermic at 0 K on TiO₂(101), but H₂ (H₂O) desorption is entropically driven above 230 K (800 K). The calculated activation barrier for H₂ desorption is 1.40 eV, which is similar to the desorption energy obtained from analysis of the D₂ TPD spectra. The H₂ desorption likely proceeds in two steps: H atom diffusion on the surface and then recombination.

Excellent UV Resistance of Polylactide by Interfacial Stereocomplexation with Double-Shell-Structured TiO2 Nanohybrids

The durable application of polylactide (PLA) under atmospheric conditions is restricted by its poor ultraviolet (UV) stability. To improve the UV stability of polymers, titanium dioxide (TiO₂) is often used as a UV light capture agent. However, TiO₂ is also a photocatalytic agent, with detrimental effects on the polymer properties. To overcome these two conflicting issues, we used the following approach. TiO₂ nanoparticles were first coated with silicon dioxide (SiO₂) (with a SiO₂ shell content of 5.3 wt %). Subsequently, poly(d-lactide) (PDLA) was grafted onto TiO₂@SiO₂ nanoparticles, approximately 20 wt %, via a ring-opening polymerization of d-lactide to obtain well-designed double-shell TiO₂@SiO₂-g-PDLA nanohybrids. These double-shell nanoparticles could be well dispersed in a poly(l-lactide) (PLLA) matrix making use of the stereocomplexation between the two enantiomers. In our concept, the inner SiO₂ shell on the TiO₂ nanoparticles prevents the direct contact between TiO₂ and the PLLA matrix and hence considerably restricts the detrimental photocatalytic effect of TiO₂ on PLLA degradation. Additionally, the outer PDLA shell facilitates an improved dispersion of these nanohybrid particles by interfacial stereocomplexation with its enantiomer PLLA. As a consequence, the PLLA/TiO₂@SiO₂-g-PDLA nanocomposites simultaneously possess excellent UV-shielding property, high(er) tensile strength (>60 MPa), and superior UV resistance, for example, the mechanical properties remain at a level of >90% after 72 h of UV irradiation. In our view, this work provides a novel strategy to make advanced PLA nanocomposites with improved mechanical properties and excellent UV resistance, which enables potential application of PLA in more critical areas such as in durable packaging and fiber/textile applications.

Two-Electron-Two-Proton Transfer from Colloidal ZnO and TiO2 Nanoparticles to Molecular Substrates

Transfers of multiple electrons and protons are challenging yet central to many energy-conversion processes and other chemical and biochemical reactions. Semiconducting oxides can hold multiple redox equivalents. This study describes the 2e^-/2H⁺ transfer reactivity of photoreduced ZnO and TiO₂ nanoparticle (NP) colloids with molecular 2e^-/2H⁺ acceptors, to form new O-H, N-H, and C-H bonds. The reaction stoichiometries were monitored by NMR and optical spectroscopies. Faster 2e^-/2H⁺ transfer rates were observed for substrates forming O-H or N-H bonds, presumably due to initial hydrogen bonding at the oxide surface. Chemically reduced ZnO NPs stabilized by Na⁺ or Ca²⁺ also engage in 2e^-/2H⁺ transfer reactivity, showing that protons transferred in these processes are inherent to the oxide nanoparticles and do not exclusively stem from photoreduction. These results highlight the potential of ZnO and TiO₂ for multiple proton-coupled electron transfer (PCET) reactions.

Surface chemistry of TiO2 connecting thermal catalysis and photocatalysis

Chemical reactions catalyzed under heterogeneous conditions have recently expanded rapidly from traditional thermal catalysis to photocatalysis due to the rising concerns about sustainable development of energy and the environment. Adsorption of reactants on catalyst surfaces, subsequent surface reactions, and desorption of products from catalyst surfaces occur in both thermal catalysis and photocatalysis. TiO₂ catalysts are widely used in thermal catalytic and photocatalytic reactions. Herein we review recent progress in surface chemistry, thermal catalysis and photocatalysis of TiO₂ model catalysts from single crystals to nanocrystals with the aim of examining if the surface chemistry of TiO₂ can bridge the fundamental understanding between thermal catalysis and photocatalysis. Following a brief introduction, the structures of major facets exposed on TiO₂ catalysts, including surface reconstructions and defects, as well as the electronic structure and charge properties, are firstly summarized; then the recent progress in adsorption, thermal chemistry and photochemistry of small molecules on TiO₂ single crystals and nanocrystals is comprehensively reviewed, focusing on manifesting the structure-(photo)activity relations and the commonalities/differences between thermal catalysis and photocatalysis; and finally concluding remarks and perspectives are given.

Photocatalytic Cleavage of β-O-4 Ether Bonds in Lignin over Ni/TiO2

It is of great importance to explore the selective hydrogenolysis of β-O-4 linkages, which account for 45–60% of all linkages in native lignin, to produce valued-added chemicals and fuels from biomass employing UV light as catalyst. TiO₂ exhibited satisfactory catalytic performances in various photochemical reactions, due to its versatile advantages involving high catalytic activity, low cost and non-toxicity. In this work, 20 wt.% Ni/TiO₂ and oxidant PCC (Pyridinium chlorochromate) were employed to promote the cleavage of β-O-4 alcohol to obtain high value chemicals under UV irradiation at room temperature. The Ni/TiO₂ photocatalyst can be magnetically recovered and efficiently reused in the following four consecutive recycling tests in the cleavage of β-O-4 ether bond in lignin. Mechanism studies suggested that the oxidation of β-O-4 alcohol to β-O-4 ketone by oxidant PCC first occurred during the reaction, and was followed by the photocatalysis of the obtained β-O-4 ketone to corresponding acetophenone and phenol derivates. Furthermore, the system was tested on a variety of lignin model substrates containing β-O-4 linkage for the generation of fragmentation products in good to excellent results.