Living in the Fast Lane—High Throughput Controlled/Living Radical Polymerization

Photoregulated reversible addition–fragmentation chain transfer (RAFT) polymerization

Different strategies on photoregulated RAFT polymerization are developed. This minireview summarizes recent advances in photoregulated RAFT polymerization and its applications.

Photo-controlled RAFT polymerization mediated by organic/inorganic hybrid photoredox catalysts: enhanced catalytic efficiency

Photo-controlled RAFT polymerization mediated by an organic/inorganic hybrid photoredox catalyst (ZnTPP–POSS) was performed and showed enhanced catalytic efficiency compared with the ZnTPP photocatalyst.

PCR-RAFT: rapid high throughput oxygen tolerant RAFT polymer synthesis in a biology laboratory

We performed high-throughput oxygen tolerant ultra-fast RAFT polymerisation producing complex polymer libraries utilising PCR thermocyclers. This now enables the preparation of these libraries in under 5 min without chemistry equipment.

Enabling technologies in polymer synthesis: accessing a new design space for advanced polymer materials

This review discusses how developments in laboratory technologies can push the boundaries of what is achievable using existing polymer synthesis techniques.

Synthesis of CO2-based polycarbonate-g-polystyrene copolymers via NMRP

The synthesis of CO₂-based APC-graft-polystyrene copolymers via NMRP.

Semiautomated Parallel RAFT Copolymerization of Isoprene with Glycidyl Methacrylate

Copolymerization of isoprene (IP) with glycidyl methacrylate (GMA) was performed under RAFT (reversible addition-fragmentation chain-transfer) polymerization conditions in a platform for high-output experimentation. Covering the range between 1 and 0.2 molar fraction of IP in the feed, four sets of reactions were carried out at 10, 15, 20, and 30 h at 115 °C. The kinetic data obtained were used to estimate the reactivity ratios using a nonlinear least-squares approach (NLLS). Reactivity ratios r_GMA = 0.61 and r_IP = 0.74 indicate that both monomers tend to crosspropagate in agreement with known literature values. Concerning the RAFT study, relatively good control and livingness of the copolymerization was observed except for the experiment in which IP represents 20 mol % in the feed. ¹H NMR characterization confirmed the presence of both monomers in the final copolymer, particularly the presence of the epoxy ring of GMA which is susceptible to post polymerization reactions. Finally, preliminary results on the hydrogenation of various polymers are discussed.

A Dual Wavelength Polymerization and Bioconjugation Strategy for High Throughput Synthesis of Multivalent Ligands

Structure-function relationships for multivalent polymer scaffolds are highly complex due to the wide diversity of architectures offered by such macromolecules. Evaluation of this landscape has traditionally been accomplished case-by-case due to the experimental difficulty associated with making these complex conjugates. Here, we introduce a simple dual-wavelength, two-step polymerize and click approach for making combinatorial conjugate libraries. It proceeds by incorporation of a polymerization friendly cyclopropenone-masked dibenzocyclooctyne into the side chain of linear polymers or the α-chain end of star polymers. Polymerizations are performed under visible light using an oxygen tolerant porphyrin-catalyzed photoinduced electron/energy transfer-reversible addition-fragmentation chain-transfer (PET-RAFT) process, after which the deprotection and click reaction is triggered by UV light. Using this approach, we are able to precisely control the valency and position of ligands on a polymer scaffold in a manner conducive to high throughput synthesis.

Purifying Low-Volume Combinatorial Polymer Libraries with Gel Filtration Columns

Recent advances in oxygen-tolerant controlled/living radical polymer chemistry now enable efficient synthesis of diverse and combinatorial polymer libraries. While library synthesis has been dramatically simplified, equally efficient purification strategies for removal of small-molecule impurities are not yet established in high throughput settings. It is shown that gel filtration columns for chromatography frequently used in the protein science community are well suited for high throughput polymer purification. Using either single-use columns or gel filtration plates, the purification of 32 diverse polymers is demonstrated in a library with >95% removal of small molecule impurities and >85% polymer retention in a single purification step. Doing so replaces the typical procedure of polymer precipitation, which requires solvent optimization for each polymer in a complex library. Overall, this work raises awareness in the polymer science community that gel filtration is amenable to purification of large polymer libraries and can speed up the progress of combinatorial polymer chemistry.

PET-RAFT and SAXS: High Throughput Tools to Study Compactness and Flexibility of Single-Chain Polymer Nanoparticles

From protein science, it is well understood that ordered folding and 3D structure mainly arises from balanced and noncovalent polar and nonpolar interactions, such as hydrogen bonding. Similarly, it is understood that single-chain polymer nanoparticles (SCNPs) will also compact and become more rigid with greater hydrophobicity and intrachain hydrogen bonding. Here, we couple high throughput photoinduced electron/energy transfer reversible addition-fragmentation chain-transfer (PET-RAFT) polymerization with high throughput small-angle X-ray scattering (SAXS) to characterize a large combinatorial library (>450) of several homopolymers, random heteropolymers, block copolymers, PEG-conjugated polymers, and other polymer-functionalized polymers. Coupling these two high throughput tools enables us to study the major influence(s) for compactness and flexibility in higher breadth than ever before possible. Not surprisingly, we found that many were either highly disordered in solution, in the case of a highly hydrophilic polymer, or insoluble if too hydrophobic. Remarkably, we also found a small group (9/457) of PEG-functionalized random heteropolymers and block copolymers that exhibited compactness and flexibility similar to that of bovine serum albumin (BSA) by dynamic light scattering (DLS), NMR, and SAXS. In general, we found that describing a rough association between compactness and flexibility parameters (R g /R h and Porod Exponent, respectively) with logP, a quantity that describes hydrophobicity, helps to demonstrate and predict material parameters that lead to SCNPs with greater compactness, rigidity, and stability. Future implementation of this combinatorial and high throughput approach for characterizing SCNPs will allow for the creation of detailed design parameters for well-defined macromolecular chemistry.

High-Throughput Tertiary Amine Deoxygenated Photopolymerizations for Synthesizing Polymer Libraries

The huge chemical space potential of synthetic polymers means that in many studies only a small parameter range can be realistically synthesized in a short time and hence the "best" formulations may not be optimum. Throughput is traditionally limited by the need for deoxygenation in radical polymerizations, but advances in photopolymerization now provide opportunities for "in-air" polymerizations. Here, we have developed a protocol using liquid handling robots (or multichannel pipettes) with blue light photolysis of reversible addition fragmentation chain transfer agents and tertiary amine deoxygenation to enable the synthesis of polymer libraries in industry-standard 96-well plates with no specialized infrastructure and no degassing step. The roles of solvents and amine deoxygenators are explored to optimize the polymerization, particularly to look at alternatives to dimethyl sulfoxide (DMSO) for hydrophobic monomer (co)polymerization. DMSO is shown to aid the degassing process but is not easy to remove and hence prevents isolation of pure polymers. In contrast, using dioxane in-plate evaporation or precipitation of the tertiary amine allowed isolation of polymers in-plate. This removed all reaction components yielding pure polymers, which is not easily achieved with systems using metal catalysts and secondary reductants, such as ascorbic acid. As an example of the throughput, in just under 40 h, 392 polymers were synthesized and subsequently analyzed direct from plates by a 96-well plate sampling size exclusion chromatography system to demonstrate reproducibility. Due to less efficient degassing in dioxane (compared to DMSO), the molecular weight and dispersity control were limited in some cases (with acrylates giving the lowest dispersities), but the key aim of this system is to access hundreds of polymers quickly and in a format needed to enable testing. This method enables easy exploration of chemical space and development of screening libraries to identify hits for further study using precision polymerization methods.

Enzyme Degassing for Oxygen-Sensitive Reactions in Open Vessels of an Automated Parallel Synthesizer: RAFT Polymerizations

An enzyme degassing method for oxygen-intolerant polymerizations was implemented in a commercially available automated parallel synthesizer and tested for reversible addition-fragmentation chain transfer (RAFT) polymerizations performed in open vessels. For this purpose, a recently reported methodology that employs the enzyme glucose oxidase (GOx) to deplete oxygen in reaction media was utilized. The effectiveness of this approach to perform unattended parallel polymerization reactions in open vessels was demonstrated by comparing experimental results to those obtained under similar experimental conditions but utilizing the common degassing method of sparging N₂ to remove oxygen. The proposed experimental technique displayed good precision in performing RAFT polymerizations and good control of the obtained polymers and could be easily adapted to other systems where the removal of oxygen is mandatory. This alternative high-throughput/high-output method may have the potential to increase productivity in research projects where oxygen-intolerant reactions are involved.

High Throughput Screening of Glycopolymers: Balance between Cytotoxicity and Antibacterial Property

To search for synthetic agents with low cytotoxicity and good antibacterial activity is essential for antimicrobial applications. Here we report a high throughput technique that carried out in multiwell plates via recyclable-catalyst-aided, opened-to-air, and sunlight-photolyzed RAFT (ROS-RAFT) polymerization. By using this method, three key monomers (MAG the sugar unit, DMAPMA the positively charged monomer, and DEMAA the hydrophobic monomer) can be polymerized in a controlled manner to afford glycopolymers. This simple high throughput technology is used to synthesize glycopolymers with variable compositions. The bacterial adhesion/killing ability and cytotoxicity of synthesized polymers have been evaluated, and glycopolymers with certain composition can achieve a balance of low cytotoxic and good antibacterial activity.