Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal

Induced Anionic Functional Group Orientation-Assisted Stable Electrode-Electrolyte Interphases for Highly Reversible Zinc Anodes

Dendrite growth and other side-reaction problems of zinc anodes in aqueous zinc-ion batteries heavily affect their cycling lifespan and Coulombic efficiency, which can be effectively alleviated by the application of polymer-based functional protection layer on the anode. However, the utilization rate of functional groups is difficult to improve without destroying the polymer chain. Here, a simple and well-established strategy is proposed by controlling the orientation of functional groups (─SO3H) to assist the optimization of zinc anodes. Depending on the electrostatic effect, the surface-enriched ─SO3H groups increase the ionic conductivity and homogenize the Zn2+ flux while inhibiting anionic permeation. This approach avoids the destruction of the polymer backbone by over-sulfonation and amplifies the effect of functional groups. Therefore, the modified sulfonated polyether ether ketone (H-SPEEK) coating-optimized zinc anode is capable of longtime stable zinc plating/stripping, and moreover an enhanced cycling steadiness under high current densities is also detected in a series of Zn batteries with different cathode materials, which achieved by the inclusion of H-SPEEK coating without causing any harmful effects on the electrolyte and cathode. This work provides an easy and efficient approach to further optimize the plating/stripping of cations on metal electrodes, and sheds lights on the scale-up of high-performance aqueous zinc-ion battery technology.

Entanglement Added to Cross-Linked Chains Enables Tough Gelatin-Based Hydrogel for Zn Metal Batteries

Currently, it is still challenging to develop a hydrogel electrolyte matrix that can successfully achieve a harmonious combination of mechanical strength, ionic conductivity, and interfacial adaptability. Herein, a multi-networked hydrogel electrolyte with a high entanglement effect based on gelatin/oxidized dextran/methacrylic anhydride, denoted as ODGelMA is constructed. Attribute to the Schiff base network formulation of ─RC═N─, oxidized dextran integrated gelatin chains induce a dense hydrophilic conformation group. Furthermore, addition of methacrylic anhydride through a grafting process, the entangled hydrogel achieves impressive mechanical features (6.8 MPa tensile strength) and high ionic conductivity (3.68 mS cm-1 at 20 °C). The ODGelMA electrolyte regulates the zinc electrode by circumventing dendrite growth, and showcases an adaptable framework reservoir to accelerate the Zn2+ desolvation process. Benefiting from the entanglement effect, the Zn anode achieves an outstanding average Coulombic efficiency (CE) of 99.8% over 500 cycles and cycling stability of 900 h at 5 mA cm-2 and 2.5 mAh cm-2. The Zn||I2 full cell yields an ultra-long cycling stability of 10 000 cycles with a capacity retention of 92.4% at 5 C. Furthermore, a 60 mAh single-layer pouch cell maintains a stable work of 350 cycles.

Kinetics Conditioning of (Electro) Chemically Stable Zn Anode with pH Regulation Toward Long-Life Zn-Storage Devices

The safety, low cost, and high power density of aqueous Zn-based devices (AZDs) appeal to large-scale energy storage. Yet, the presence of hydrogen evolution reaction (HER) and chemical corrosion in the AZDs leads to local OH- concentration increasement and the formation of ZnxSOy(OH)z•nH2O (ZHS) by-products at the Zn/electrolyte interface, causing instability and irreversibility of the Zn-anodes. Here, a strategy is proposed to regulate OH- by introducing a bio-sourced/renewable polypeptide (ɛ-PL) as a pH regulator in electrolyte. The consumption of OH- species is evaluated through in vitro titration and cell in vivo in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy at a macroscopic and molecular level. The introduction of ɛ-PL is found to significantly suppress the formation of ZHS and associated side reactions, and reduce the local coordinated H2O of the Zn2+ solvation shell, widening electrochemical stable window and suppressing OH- generation during HER. As a result, the inclusion of ɛ-PL improves the cycle time of Zn/Zn symmetrical cells from 15 to 225 h and enhances the cycle time of aqueous Zn- I2 cells to 1650 h compared to those with pristine electrolytes. This work highlights the potential of kinetical OH- regulation for by-product and dendrite-free AZDs.

Binary Solvent Induced Stable Interphase Layer for Ultra-Long Life Sodium Metal Batteries

Sodium foil, promising for high-energy-density batteries, faces reversibility challenges due to its inherent reactivity and unstable solid electrolyte interphase (SEI) layer. In this study, a stable sodium metal battery (SMB) is achieved by tuning the electrolyte solvation structure through the addition of co-solvent 2-methyl tetrahydrofuran (MTHF) to diglyme (Dig). The introduction of cyclic ether-based MTHF results in increased anion incorporation in the solvation structure, even at lower salt concentrations. Specifically, the anion stabilization capabilities of the environmentally sustainable MTHF co-solvent lead to a contact-ion pair-based solvation structure. Time-of-flight mass spectroscopy analysis reveals that a shift toward an anion-dominated solvation structure promotes the formation of a thin and uniform SEI layer. Consequently, employing a NaPF6-based electrolyte with a Dig:MTHF ratio of 50% (v/v) binary solvent yields an average Coulombic efficiency of 99.72% for 300 cycles in Cu||Na cell cycling. Remarkably, at a C/2 cycling rate, Na||Na symmetric cell cycling demonstrates ultra-long-term stability exceeding 7000 h, and full cells with Na0.44MnO2 as a cathode retain 80% of their capacity after 500 cycles. This study systematically examines solvation structure, SEI layer composition, and electrochemical cycling, emphasizing the significance of MTHF-based binary solvent mixtures for high-performance SMBs.

Epitaxial Metal Electrodeposition Controlled by Graphene Layer Thickness

Control over material structure and morphology during electrodeposition is necessary for material synthesis and energy applications. One approach to guide crystallite formation is to take advantage of epitaxy on a current collector to facilitate crystallographic control. Single-layer graphene on metal foils can promote "remote epitaxy" during Cu and Zn electrodeposition, resulting in growth of metal that is crystallographically aligned to the substrate beneath graphene. However, the substrate-graphene-deposit interactions that allow for epitaxial electrodeposition are not well understood. Here, we investigate how different graphene layer thicknesses (monolayer, bilayer, trilayer, and graphite) influence the electrodeposition of Zn and Cu. Scanning transmission electron microscopy and electron backscatter diffraction are leveraged to understand metal morphology and structure, demonstrating that remote epitaxy occurs on mono- and bilayer graphene but not trilayer or thicker. Density functional theory (DFT) simulations reveal the spatial electronic interactions through thin graphene that promote remote epitaxy. This work advances our understanding of electrochemical remote epitaxy and provides strategies for improving control over electrodeposition.

Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications

Rechargeable batteries, typically represented by lithium-ion batteries, have taken a huge leap in energy density over the last two decades. However, they still face material/chemical challenges in ensuring safety and long service life at temperatures beyond the optimum range, primarily due to the chemical/electrochemical instabilities of conventional liquid electrolytes against aggressive electrode reactions and temperature variation. In this regard, a gel polymer electrolyte (GPE) with its liquid components immobilized and stabilized by a solid matrix, capable of retaining almost all the advantageous natures of the liquid electrolytes and circumventing the interfacial issues that exist in the all-solid-state electrolytes, is of great significance to realize rechargeable batteries with extended working temperature range. We begin this review with the main challenges faced in the development of GPEs, based on extensive literature research and our practical experience. Then, a significant section is dedicated to the requirements and design principles of GPEs for wide-temperature applications, with special attention paid to the feasibility, cost, and environmental impact. Next, the research progress of GPEs is thoroughly reviewed according to the strategies applied. In the end, we outline some prospects of GPEs related to innovations in material sciences, advanced characterizations, artificial intelligence, and environmental impact analysis, hoping to spark new research activities that ultimately bring us a step closer to realizing wide-temperature rechargeable batteries.

Rapid Growth of Bi2Se3 Nanodots on MXene Nanosheets at Room Temperature for Promoting Sulfur Redox Kinetics

Li-S batteries are hampered by problems with their cathodes and anodes simultaneously. The improvement of Li-S batteries needs to consider both the anode and cathode. Herein, a Bi2Se3@MXene composite is prepared for the first time by rapidly growing Bi2Se3 nanodots on two-dimensional (2D) MXene nanosheets at room temperature through simply adding high-reactive hydroxyethylthioselenide in Bi3+/MXene aqueous solution. Bi2Se3@MXene exhibits a 2D structure due to the template effect of 2D MXene. Bi2Se3@MXene can not only facilitate the conversion of lithium polysulfides (LiPSs) but also inhibit their shuttling in the S cathode due to its catalytic effect and adsorption force with LiPSs. Bi2Se3@MXene can also be used as an interfacial lithiophilic layer to inhibit Li dendrite growth in the Li metal anode. Theoretical calculations reveal that Bi2Se3 nanodots in Bi2Se3@MXene can effectively boost the adsorption ability with LiPSs, and the MXene in Bi2Se3@MXene can accelerate the electron transport. Under the bidirectional regulation of Bi2Se3@MXene in the Li metal anode and S cathode, the Li-S battery shows an enhanced electrochemical performance.

Constructing the Polymer Molecules to Regulate the Electrode/Electrolyte Interface to Enhance Lithium-Metal Battery Performance

Lithium-ion batteries, with high energy density and long cycle life, have become the battery of choice for most vehicles and portable electronic devices; however, energy density, safety and cycle life require further improvements. Single-functional group electrolyte additives are very limited in practical applications, a ternary polymer bifunctional electrolyte additive copolymer (acrylonitrile-butyl hexafluoro methacrylate- poly (ethylene glycol) methacrylate- methyl ether) (PMANHF) was synthesized by free radical polymerization of acrylonitrile, 2, 2, 3, 4, 4, 4-hexafluorobutyl methacrylate and poly (ethylene glycol) methyl ether methacrylate. A series of characterizations show that in Li metal anodes, the preferential reduction of PMANHF is conducive to the formation of a uniform and stable solid electrolyte interphase layer, and Li deposition is uniform and dense. At the NCM811 cathode, a film composed of LiF- and Li3N-rich is formed at the cathode-electrolyte interface, mitigating the side reaction at the interface. At 1.0 mA cm-2, the Li/Li cell can be stabilized for 1000 cycles. In addition, the Li/NCM811 cell can stabilize 200 cycles with a cathode capacity of 153.7 mAh g-1, with the capacity retention of 89.93 %, at a negative/positive capacity ratio of 2.5. This study brings to light essential ideas for the fabrication of additives for lithium-metal batteries.

Rational Lithium Salt Molecule Tuning for Fast Charging/Discharging Lithium Metal Battery

The electrolytes for lithium metal batteries (LMBs) are plagued by a low Li+ transference number (T+) of conventional lithium salts and inability to form a stable solid electrolyte interphase (SEI). Here, we synthesized a self-folded lithium salt, lithium 2-[2-(2-methoxy ethoxy)ethoxy]ethanesulfonyl(trifluoromethanesulfonyl) imide (LiETFSI), and comparatively studied with its structure analogue, lithium 1,1,1-trifluoro-N-[2-[2-(2-methoxyethoxy)ethoxy)]ethyl]methanesulfonamide (LiFEA). The special anion chemistry imparts the following new characteristics: i) In both LiFEA and LiETFSI, the ethylene oxide moiety efficiently captures Li+, resulting in a self-folded structure and high T+ around 0.8. ii) For LiFEA, a Li-N bond (2.069 Å) is revealed by single crystal X-ray diffraction, indicating that the FEA anion possesses a high donor number (DN) and thus an intensive interphase "self-cleaning" function for an ultra-thin and compact SEI. iii) Starting from LiFEA, an electron-withdrawing sulfone group is introduced near the N atom. The distance of Li-N is tuned from 2.069 Å in LiFEA to 4.367 Å in LiETFSI. This alteration enhances ionic separation, achieves a more balanced DN, and tunes the self-cleaning intensity for a reinforced SEI. Consequently, the fast charging/discharging capability of LMBs is progressively improved. This rationally tuned anion chemistry reshapes the interactions among Li+, anions, and solvents, presenting new prospects for advanced LMBs.

Role of Interface Strain and Chemo-Mechanical Effects during Electroplating in Sodium Metal Battery Anodes

In this study, we demonstrate that elastic strain applied to a current collector can influence the overall thermodynamic and kinetic picture of sodium metal electrodeposition and hence the performance of a sodium metal battery. To controllably study the role of strain in electrochemical performance, we utilize NiTi foil as a stable current collector, nucleation interface, and superelastic material. Our findings demonstrate that a locked-in elastic tensile strain near 8% results in 40 mV lower onset potential for sodium electrodeposition, 19% decrease in charge transfer resistance, and 20% lower cumulative sodium loss, among other effects. These performance improvements are correlated primarily to the control of the irreversible behavior in the first few minutes of electroplating. Given the prevalence of strain buildup in commercial battery cell configurations, our work highlights that strained current collector interfaces can result in significant long-term chemo-mechanical performance outcomes broadly relevant to sodium and other metal battery design considerations.

Thermodynamics, Adhesion, and Wetting at Li/Cu(-Oxide) Interfaces: Relevance for Anode-Free Lithium-Metal Batteries

A rechargeable battery that employs a Li metal anode requires that Li be plated in a uniform fashion during charging. In "anode-free" configurations, this plating will occur on the surface of the Cu current collector (CC) during the initial cycle and in any subsequent cycle where the capacity of the cell is fully accessed. Experimental measurements have shown that the plating of Li on Cu can be inhomogeneous, which can lower the efficiency of plating and foster the formation of Li dendrites. The present study employs a combination of first-principles calculations and sessile drop experiments to characterize the thermodynamics and adhesive (i.e., wetting) properties of interfaces involving Li and other phases present on or near the CC. Interfaces between Li and Cu, Cu2O, and Li2O are considered. The calculations predict that both Cu and Cu2O surfaces are lithiophilic. However, sessile drop measurements reveal that Li wetting occurs readily only on pristine Cu. This apparent discrepancy is explained by the occurrence of a spontaneous conversion reaction, 2 Li + Cu2O → Li2O + 2 Cu, that generates Li2O as one of its products. Calculations and sessile drop measurements show that Li does not wet (newly formed) Li2O. Hence, Li that is deposited on a Cu CC where surface oxide species are present will encounter a compositionally heterogeneous substrate comprising lithiophillic (Cu) and lithiophobic (Li2O) regions. These initial heterogeneities have the potential to influence the longer-term behavior of the anode under cycling. In sum, the present study provides insights into the early stage processes associated with Li plating in anode-free batteries and describes mechanisms that contribute to inefficiencies in their operation.

Structural Design of 3D Current Collectors for Lithium Metal Anodes: A Review

Due to the ultrahigh theoretical specific capacity (3860 mAh g-1) and low redox potential (-3.04 V vs. standard hydrogen electrode), Lithium (Li) metal anode (LMA) received increasing attentions. However, notorious dendrite and volume expansion during the cycling process seriously hinder the development of high energy density Li metal batteries. Constructing three-dimensional (3D) current collectors for Li can fundamentally solve the intrinsic drawback of hostless for Li. Therefore, this review systematically introduces the design and synthesis engineering and the current development status of different 3D collectors in recent years (the current collectors are divided into two major parts: metal-based current collectors and carbon-based current collectors). In the end, some perspectives of the future promotion for LMA application are also presented.

Extending Cycling Life Beyond 300 000 Cycles in Aqueous Zinc Ion Capacitors Through Additive Interface Engineering

Developing low-cost and long-cycling-life aqueous zinc (Zn) ion capacitors (AZICs) for large-scale electrochemical energy storage still faces the challenges of dendritic Zn deposition and interfacial side reactions. Here, an interface engineering strategy utilizing a dibenzenesulfonimide (BBI) additive is employed to enhance the stability of the Zn metal anode/electrolyte interface. The first-principles calculation results demonstrate that BBI anions can be chemically adsorbed on Zn metal. Meanwhile, the experimental results confirm that the BBI-Zn interfacial layer converts the original water-richelectric double layer (EDL) into a water-poor EDL, effectively inhibiting the water related parasitic reaction at the electrode/electrolyte interface. In addition, the BBI-Zn interfacial layer introduces an additional Zn ions (Zn2+) migration energy barrier, increasing the Zn2+ de-solvation activation energy, consequently raising the Zn2+ nucleation overpotential, and thus achieving the compact and uniform Zn deposition behavior. Furthermore, the solid electrolyte interphase (SEI) layer derived from the BBI-Zn interfacial layer during cycling can further maintain the interfacial stability of the Zn anode. Owing to the above favorable features, the assembled AZIC exhibits an ultra-long cycling life of over 300 000 cycles based on the additive engineering strategy, which shows application prospects in high-performance AZICs.

Toward maximum energy density enabled by anode-free lithium metal batteries: Recent progress and perspective

Owing to the emergenceof energy storage and electric vehicles, the desire for safe high-energy-density energy storage devices has increased research interest in anode-free lithium metal batteries (AFLMBs). Unlike general lithium metal batteries (LMBs), in which excess Li exists to compensate for the irreversible loss of Li, only the current collector is employed as an anode and paired with a lithiated cathode in the fabrication of AFLMBs. Owing to their unique cell configuration, AFLMBs have attractive characteristics, including the highest energy density, safety, and cost-effectiveness. However, developing AFLMBs with extended cyclability remains an issue for practical applications because the high reactivity of Li with limited inventory causes severely low Coulombic efficiency (CE), poor cyclability, and dendrite growth. To address these issues, tremendous effort has been devoted to stabilizing Li metal anodes for AFLMBs. In this review, the importance and challenges of AFLMBs are highlighted. Then, diverse strategies, such as current collectors modification, advanced electrolytes, cathode engineering, and operation protocols are thoroughly reviewed. Finally, a future perspective on the strategy is provided for insight into the basis of future research. It is hoped that this review provides a comprehensive understanding by reviewing previous research and arousing more interest in this field.

Building Stable Anodes for High-Rate Na-Metal Batteries

Due to low cost and high energy density, sodium metal batteries (SMBs) have attracted growing interest, with great potential to power future electric vehicles (EVs) and mobile electronics, which require rapid charge/discharge capability. However, the development of high-rate SMBs has been impeded by the sluggish Na+ ion kinetics, particularly at the sodium metal anode (SMA). The high-rate operation severely threatens the SMA stability, due to the unstable solid-electrolyte interface (SEI), the Na dendrite growth, and large volume changes during Na plating-stripping cycles, leading to rapid electrochemical performance degradations. This review surveys key challenges faced by high-rate SMAs, and highlights representative stabilization strategies, including the general modification of SMB components (including the host, Na metal surface, electrolyte, separator, and cathode), and emerging solutions with the development of solid-state SMBs and liquid metal anodes; the working principle, performance, and application of these strategies are elaborated, to reduce the Na nucleation energy barriers and promote Na+ ion transfer kinetics for stable high-rate Na metal anodes. This review will inspire further efforts to stabilize SMAs and other metal (e.g., Li, K, Mg, Zn) anodes, promoting high-rate applications of high-energy metal batteries towards a more sustainable society.

A Photolithographable Electrolyte for Deeply Rechargeable Zn Microbatteries in On-Chip Devices

Zn batteries show promise for microscale applications due to their compatibility with air fabrication but face challenges like dendrite growth and chemical corrosion, especially at the microscale. Despite previous attempts in electrolyte engineering, achieving successful patterning of electrolyte microscale devices has remained challenging. Here, successful patterning using photolithography is enabled by incorporating caffeine into a UV-crosslinked polyacrylamide hydrogel electrolyte. Caffeine passivates the Zn anode, preventing chemical corrosion, while its coordination with Zn2+ ions forms a Zn2+-conducting complex that transforms into ZnCO3 and 2ZnCO3·3Zn(OH)2 over cycling. The resulting Zn-rich interphase product significantly enhances Zn reversibility. In on-chip microbatteries, the resulting solid-electrolyte interphase allows the Zn||MnO2 full cell to cycle for over 700 cycles with an 80% depth of discharge. Integrating the photolithographable electrolyte into multilayer microfabrication creates a microbattery with a 3D Swiss-roll structure that occupies a footprint of 0.136 mm2. This tiny microbattery retains 75% of its capacity (350 µAh cm-2) for 200 cycles at a remarkable 90% depth of discharge. The findings offer a promising solution for enhancing the performance of Zn microbatteries, particularly for on-chip microscale devices, and have significant implications for the advancement of autonomous microscale devices.

Breaking the Solubility Limit of LiNO3 in Carbonate Electrolyte Assisted by BF3 to Construct a Stable SEI Film for Dendrite-Free Lithium Metal Batteries

Lithium (Li) metal is regarded as a potential candidate for the next generation of lithium secondary batteries, but it has poor cycling stability with the broadly used carbonate-based electrolytes due to the uncontrollable dendritic growth and low Coulombic efficiency (CE). LiNO3 is an effective additive and its limited solubility (<800 ppm) in carbonate-based electrolytes is still a challenge, as reported. Herein, using BF3 (Lewis acid) is proposed to enhance the solubility of LiNO3 in carbonate-based electrolytes. The dissolved NO3 - can be involved in the first solvation shell of Li+, reducing the coordination number of PF6 - and EC (ethylene carbonate). In addition, the NO3 - is proved to be preferentially reduced on Li metal by differential electrochemical mass spectrometry so that the decomposition of PF6 - and EC is suppressed. Therefore, a SEI layer containing Li3N can be obtained, which exhibits high lithium-ion conductivity, achieving even and dense Li deposits. Consequently, the CE of Li||Cu cell with BF3/LiNO3 can be increased to 98.07%. Moreover, the capacity retention of Li||LiFePO4 with a low N/P ratio (3:1) is as high as 90% after 300 cycles (≈1500 h). This work paved a new way for incorporating LiNO3 into carbonate-based electrolytes and high-performance lithium metal batteries.

Single [0001]-oriented zinc metal anode enables sustainable zinc batteries

The optimization of crystalline orientation of a Zn metal substrate to expose more Zn(0002) planes has been recognized as an effective strategy in pursuit of highly reversible Zn metal anodes. However, the lattice mismatch between substrate and overgrowth crystals has hampered the epitaxial sustainability of Zn metal. Herein, we discover that the presence of crystal grains deviating from [0001] orientation within a Zn(0002) metal anode leads to the failure of epitaxial mechanism. The electrodeposited [0001]-uniaxial oriented Zn metal anodes with a single (0002) texture fundamentally eliminate the lattice mismatch and achieve ultra-sustainable homoepitaxial growth. Using high-angle angular dark-filed scanning transmission electron microscopy, we elucidate the homoepitaxial growth of the deposited Zn following the "~ABABAB~" arrangement on the Zn(0002) metal from an atomic-level perspective. Such consistently epitaxial behavior of Zn metal retards dendrite formation and enables improved cycling, even in Zn||NH4V4O10 pouch cells, with a high capacity of 220 mAh g-1 for over 450 cycles. The insights gained from this work on the [0001]-oriented Zn metal anode and its persistently homoepitaxial mechanism pave the way for other metal electrodes with high reversibility.

Electrochemical Conversion of CO2 into Formate Boosted by In Situ Reconstruction of Bi-MOF to Bi2O2CO3 Ultrathin Nanosheets

Substantial emissions of CO2 have presented formidable challenges for global climate dynamics. Electrochemical reduction of CO2 to produce formic acid (HCOOH) is considered to be a promising approach for achieving carbon neutrality. Nevertheless, the development of a catalyst exhibiting both high catalytic activity and selectivity toward desired products remains an arduous task. Herein, we report the synthesis of a unique porous bismuth-based MOF (Bi-BTC) through microwave-assisted agitation. The Bi-BTC MOF has a good catalytic performance in electrochemical CO2RR to formate products. At -0.9 V (vs RHE) potential, the Faradaic efficiency of formate can reach 96%, and the current density of the CO2RR is 25 mA/cm2. Bi-BTC also exhibits good electrochemical stability. FEformate and current density were maintained for 24 h with almost no attenuation. It was found that Bi-BTC was reconstructed in the CO2RR process. The shape of nanocolumn before electrolysis is transformed into an ultrathin nanosheet. The soft and hard acid-base theory (HSAB) proves that the reason for the reconfiguration is that the hard base ions (HCO3-) and the intermediate acid (Bi3+) break in the Bi-O bond in Bi-MOF, resulting in the transition of the original column structure of Bi-BTC to Bi2O2CO3 ultrathin nanosheeets. The DFT calculation shows that the restructured Bi2O2CO3 nanosheet exposes a crystal surface structure, which is conducive to lower the activation energy barrier of the electrochemical CO2RR intermediate *OCHO and stabilizing the reaction intermediate. Therefore, it is more beneficial to improve the selectivity of the electrochemical CO2RR to formate formation. This result proves that irreversible reconfiguration of catalyst is beneficial to electrochemical CO2RR. In addition, coupling a Bi-BTC cathode with a stable anode (IrO2) enables battery-driven high-activity CO2RR and an OER with good activity and efficiency.

Gyroid Liquid Crystals as Quasi-Solid-State Electrolytes Toward Ultrastable Zinc Batteries

The potential for optimizing ion transport through triply periodic minimal surface (TPMS) structures renders promising electrochemical applications. In this study, as a proof-of-concept, we extend the inherent efficiency and mathematical beauty of TPMS structures to fabricate liquid-crystalline electrolytes with high ionic conductivity and superior structural stability for aqueous rechargeable zinc-ion batteries. The specific topological configuration of the liquid-crystalline electrolytes, featuring a Gyroid geometry, enables the formation of a continuous ion conduction pathway enriched with confined water. This, in turn, promotes the smooth transport of charge carriers and contributes to high ionic conductivity. Meanwhile, the quasi-solid hydrophobic phase assembled by hydrophobic alkyl chains exhibits notable rigidity and toughness, enabling uniform and compact dendrite-free Zn deposition. These merits synergistically enhance the overall performance of the corresponding full batteries. This work highlights the distinctive role of TPMS structures in developing high-performance, liquid-crystalline electrolytes, which can provide a viable route for the rational design of next-generation quasi-solid-state electrolytes.

Enabling an Inorganic-Rich Interface via Cationic Surfactant for High-Performance Lithium Metal Batteries

An anion-rich electric double layer (EDL) region is favorable for fabricating an inorganic-rich solid-electrolyte interphase (SEI) towards stable lithium metal anode in ester electrolyte. Herein, cetyltrimethylammonium bromide (CTAB), a cationic surfactant, is adopted to draw more anions into EDL by ionic interactions that shield the repelling force on anions during lithium plating. In situ electrochemical surface-enhanced Raman spectroscopy results combined with molecular dynamics simulations validate the enrichment of NO3-/FSI- anions in the EDL region due to the positively charged CTA+. In-depth analysis of SEI structure by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry results confirmed the formation of the inorganic-rich SEI, which helps improve the kinetics of Li+ transfer, lower the charge transfer activation energy, and homogenize Li deposition. As a result, the Li||Li symmetric cell in the designed electrolyte displays a prolongated cycling time from 500 to 1300 h compared to that in the blank electrolyte at 0.5 mA cm-2 with a capacity of 1 mAh cm-2. Moreover, Li||LiFePO4 and Li||LiCoO2 with a high cathode mass loading of > 10 mg cm-2 can be stably cycled over 180 cycles.

Highly Potent and Low-Volume Concentration Additives for Durable Aqueous Zinc Batteries: Machine Learning-Enabled Performance Rationalization

The essential virtues of aqueous zinc battery chemistry stem from the energy-dense zinc metal anode and mild aqueous electrolytes. Yet, their incompatibility - as exposed by zinc's corrosion and associated dendrite problem - poses a challenge to achieving improved cycle life under practically relevant parameters. While electrolyte additives are a scalable strategy, additives that can function at low volume concentrations remain elusive. Here, through screening alkanol and alkanediol chemistries, 1,2-butanediol and pentanediol are unveiled as highly potent additives, which operate at a practical 1 volume% concentration owing to their ability to furnish dynamic solid-electrolyte interphase through pronounced interfacial filming. This unique mechanistic action renders effective corrosion and dendrite mitigation, resulting in up to five to twenty-fold zinc cyclability enhancement with a high Coulombic efficiency (up to 99.9%) and improved full-cell performance under demanding conditions, including at elevated temperatures. A machine learning-based analysis is presented to rationalize the additive performance relative to critical physicochemical descriptors, which can pave the way for a rational approach to efficient additive discoveries.

A Perspective on Uniform Plating Behavior of Mg Metal Anode: Diffusion Limited Theory versus Nucleation Theory

Utilizing metal anode is the most attractive way to meet the urgent demand for rechargeable batteries with high energy density. Unfortunately, the formation of dendrites, which is caused by uneven plating behavior, always threaten the safety of the batteries. To explore the origin of different plating behavior and predict the plating morphology of anode under a variety of operating conditions, multifarious models have been developed. However, abuse of models has led to conflictive views. In this perspective, to clarify the controversial reports on magnesium (Mg) metal plating behavior, the previously proposed models are elaborated that govern the plating process. Through linking various models and clarifying their boundary conditions, a scheme is drawn to illustrate the strategy for achieving the most dense and uniform plating morphology, which also explains the seemingly contradictory of diffusion limited theory and nucleation theory on uniform plating. This perspective will undoubtedly enhance the understanding on the metal anode plating process and provide meaningful guidance for the development of metal anode batteries.

Designing an Air-Stable Interphase on Lithium Metal Anode to Improve Cycling Performance

The application of rechargeable lithium metal batteries is challenged by intractable issues of uncontrollable Li dendrite growth that result in poor cycle life and safety risks. In this work, an air-stable interphase is developed to protect the lithium metal anode (LMA) via a facile solution-based approach. The Ag-embedded fluoride-rich interphase not only creates abundant lithiophilic sites for homogenizing Li nucleation and growth but also resists severe air erosion to protect the LMA beneath and enable decent cycling stability. As a result, the Ag-F-rich interphase enables flat Li deposition on LMA, which is clearly observed in the operando Li plating experiments. Paired with a LiFePO4 cathode (11.8 mg cm-2), the Ag-F-rich interphase-modified LMA enables 300 stable cycles at 0.5 C, delivering a capacity retention ratio as high as 91.4%. Even after being exposed to air for 1 h, the modified LMA still runs smoothly for over 120 cycles with ignorable capacity decay, exhibiting great air stability. This work proves the concept of functionalizing the interphase on the LMA to enable good cycling performance even under severe air erosion.

Lithium Metal Anodes: Advancing our Mechanistic Understanding of Cycling Phenomena in Liquid and Solid Electrolytes

Lithium metal anodes have the potential to be a disruptive technology for next-generation batteries with high energy densities, but their electrochemical performance is limited by a lack of fundamental understanding into the mechanistic origins that underpin their poor reversibility, morphological evolution (including dendrite growth), and interfacial instability. The goal of this perspective is to summarize the current state-of-the-art understanding of these phenomena, and highlight knowledge gaps where additional research is needed. The various stages of cycling are described sequentially, including nucleation, growth, open-circuit rest periods, and electrodissolution (stripping). A direct comparison of lessons learned from liquid and solid-state electrolyte systems is made throughout the discussion, providing cross-cutting insights between these research communities. Major themes of the discussion include electro-chemo-mechanical coupling, insights from in situ/operando analysis, and the interplay between experimental observations and computational modeling. Finally, a series of fundamental research questions are proposed to identify critical knowledge gaps and inform future research directions.

Enhancing Li-S Battery Performance with Limiting Li[N(SO2F)2] Content in a Sulfolane-Based Sparingly Solvating Electrolyte

By enhancing the stability of the lithium metal anode and mitigating the formation of lithium dendrites through electrolyte design, it becomes feasible to extend the lifespan of lithium-sulfur (Li-S) batteries. One widely accepted approach involves the utilization of Li[N(SO2F)2] (Li[FSA]), which holds promise in stabilizing the lithium anode by facilitating the formation of an inorganic-dominant solid electrolyte interface (SEI) film. However, the use of Li[FSA] encounters limitations due to inevitable side reactions between lithium polysulfides (LiPSs) and [FSA] anions. In this study, our focus lies in precisely controlling the composition of the SEI film and the morphology of the deposited lithium, as these two critical factors profoundly influence lithium reversibility. Specifically, by subjecting an initial charging process to an elevated temperature, we have achieved a significant enhancement in lithium reversibility. This improvement is accomplished through the employment of a LiPS sparingly solvating electrolyte with a restricted Li[FSA] content. Notably, these optimized conditions have resulted in an enhanced cycling performance in practical Li-S pouch cells. Our findings underscore the potential for improving the cycling performance of Li-S batteries, even when confronted with challenging constraints in electrolyte design.

Separator Design Strategies to Advance Rechargeable Aqueous Zinc Ion Batteries

With the increasing demand for low-cost and high-safety portable batteries, aqueous zinc-ion batteries (ZIBs) have been regarded as a potential alternative to the lithium-ion batteries, bringing about extensive research dedicated in the exploration of high-performance and highly reversible ZIBs. Although separators are generally considered as non-active components in conventional research on ZIBs, advanced separators designs seem to offer effective solutions to the majority of issues within ZIBs system. These issues encompass concerns related to the zinc anode, cathode, and electrolyte. Initially, we delve into the origins and implications of various inherent problems within the ZIBs system. Subsequently, we present the latest research advancements in addressing these challenges through separators engineering. This includes a comprehensive, detailed exploration of various strategies, coupled with instances of advanced characterizations to provide a more profound insight into the mechanisms that influence the separators. Finally, we undertake a multi-criteria evaluation, based on application standards for diverse substrate separators, while proposing guiding principles for the optimal design of separators in zinc batteries. This review aims to furnish valuable guidance for the future development of advanced separators, thereby nurturing progress in the field of ZIBs.

Inducing preferential growth of the Zn (002) plane by using a multifunctional chelator for achieving highly reversible Zn anodes

Aqueous zinc-ion batteries (AZIBs) have demonstrated great potential for large-scale energy storage. However, their practical applications have been restricted by fast Zn dendrite growth and severe side reactions at the Zn/electrolyte interface. Herein, sodium gluconate is incorporated into a mild acidic electrolyte as a multifunctional additive to stabilize the Zn anode. Experiments and theoretical calculations reveal that the SG additive can induce planar growth of Zn along its (002) direction, thereby inhibiting Zn dendrite growth. This dendrite inhibition effect is attributed to the preferential adsorption of Zn2+ on the Zn (002) plane, while the Zn (100) and (101) planes are shielded by gluconate ions. Consequently, Zn||Zn symmetric cells with the electrolyte additive exhibit significantly prolonged cycle lives of 2000 h at 1 mA cm-2, 1 mA h cm-2 and 900 h at 5 mA cm-2, 2.5 mA h cm-2. Futhermore, the Zn||NH4V4O10 full cell retains 95% of its initial capacity after 2000 cycles at a current density of 5 A g-1 with an average CE of nearly 100%. This work offers a cost-effective strategy to enhance the electrochemical performance of AZIBs.

Li Dynamics in Mixed Ionic-Electronic Conducting Interlayer of All-Solid-State Li-metal Batteries

Lithium-metal (Li0) anodes potentially enable all-solid-state batteries with high energy density. However, it shows incompatibility with sulfide solid-state electrolytes (SEs). One strategy is introducing an interlayer, generally made of a mixed ionic-electronic conductor (MIEC). Yet, how Li behaves within MIEC remains unknown. Herein, we investigated the Li dynamics in a graphite interlayer, a typical MIEC, by using operando neutron imaging and Raman spectroscopy. This study revealed that intercalation-extrusion-dominated mechanochemical reactions during cell assembly transform the graphite into a Li-graphite interlayer consisting of SE, Li0, and graphite-intercalation compounds. During charging, Li+ preferentially deposited at the Li-graphite|SE interface. Upon further plating, Li0-dendrites formed, inducing short circuits and the reverse migration of Li0. Modeling indicates the interface has the lowest nucleation barrier, governing lithium transport paths. Our study elucidates intricate mechano-chemo-electrochemical processes in mixed conducting interlayers. The behavior of Li+ and Li0 in the interlayer is governed by multiple competing factors.

Ion Sieve Interface Assisted Zinc Anode with High Zinc Utilization and Ultralong Cycle Life for 61 Wh/kg Mild Aqueous Pouch Battery

The cycling stability of a thin zinc anode under high zinc utilization has a critical impact on the overall energy density and practical lifetime of zinc ion batteries. In this study, an ion sieve protection layer (ZnSnF@Zn) was constructed in situ on the surface of a zinc anode by chemical replacement. The ion sieve facilitated the transport and desolvation of zinc ions at the anode/electrolyte interface, reduced the zinc deposition overpotential, and inhibited side reactions. Under a 50% zinc utilization, the symmetrical battery with this protection layer maintained stable cycling for 250 h at 30 mA cm-2. Matched with high-load self-supported vanadium-based cathodes (18-20 mg cm-2), the coin battery with 50% zinc utilization possessed an energy density retention of 94.3% after 1000 cycles at 20 mA cm-2. Furthermore, the assembled pouch battery delivered a whole energy density of 61.3 Wh kg-1, surpassing the highest mass energy density among reported mild zinc batteries, and retained 76.7% of the energy density and 85.3% (0.53 Ah) of the capacity after 300 cycles.

The lasting impact of formation cycling on the Li-ion kinetics between SEI and the Li-metal anode and its correlation with efficiency

Formation cycling is a critical process aimed at improving the performance of lithium ion (Li-ion) batteries during subsequent use. Achieving highly reversible Li-metal anodes, which would boost battery energy density, is a formidable challenge. Here, formation cycling and its impact on the subsequent cycling are largely unexplored. Through solid-state nuclear magnetic resonance (ssNMR) spectroscopy experiments, we reveal the critical role of the Li-ion diffusion dynamics between the electrodeposited Li-metal (ED-Li) and the as-formed solid electrolyte interphase (SEI). The most stable cycling performance is realized after formation cycling at a relatively high current density, causing an optimum in Li-ion diffusion over the Li-metal-SEI interface. We can relate this to a specific balance in the SEI chemistry, explaining the lasting impact of formation cycling. Thereby, this work highlights the importance and opportunities of regulating initial electrochemical conditions for improving the stability and life cycle of lithium metal batteries.

Functionalizing Separator by Coating a Lithiophilic Metal for Dendrite-Free Anode-free Lithium Metal Batteries

A stable anode-free lithium metal battery (AFLMB) is accomplished by the adoption of a facile fabricated amorphous antimony (Sb)-coated separator (SbSC). The large specific surface area of the separator elevates lithium (Li)-Sb alloy kinetic, improving Li wetting ability on pristine copper current collector (Cu). When tested with LiNi0.8 Mn0.1 Co0.1 O2 (NMC811) as cathode, the full cell with SbSC demonstrates low nucleation overpotential with compact, dendrite-free and homogeneous Li plating, and exhibits a notable lithium inventory retention rate (LIRR) of 99.8 % with capacity retention of 93.6 % after 60 cycles at 0.5 C-rate. Conversely, full cells containing pristine separator/Cu (i. e., SC) and pristine separator/Sb-coated current collector (i. e., SSbC) display poor cycling performances with low LIRRs. Density functional theory corroborates the nucleation behaviours observed during in-situ half-cell Li deposition. Functionalizing polymeric separator by metallic coating in AFLMB is a novel approach in improving the cycle life of an AFLMB by promoting homogeneous Li plating behavior. This innovative approach exemplifies a promising applicability for uniform Li-plating behavior to achieve a longer cycle life in AFLMB.

Influence of Au, Pt, and C Seed Layers on Lithium Nucleation Dynamics for Anode-Free Solid-State Batteries

In the concept of anode-free lithium-ion batteries, cells are manufactured with a bare anode current collector where the lithium metal anode is electrochemically formed from the lithium-containing cathode during the first charge cycle. While this concept has many attractive aspects from a manufacturing and energy density standpoint, stable plating and stripping remain challenging. We have investigated gold, platinum, and amorphous carbon as seed layers placed between the copper current collector and the lithium phosphorus oxynitride thin-film solid electrolyte. These layers guide lithium nucleation and improve the plating and stripping dynamics. All seed layers facilitate reversible lithium plating and stripping even at high current densities up to 8 mA cm-2. Of particular note is the amorphous carbon seed layer, which allowed a significant reduction in plating potential from 300 mV to as low as 50 mV. These results underscore the critical role of seed layers in improving the efficiency of anode-free solid-state batteries and open the door to simplified manufacturing of anode-free battery designs.

Zinc-copper dual-ion electrolytes to suppress dendritic growth and increase anode utilization in zinc ion capacitors

The main bottlenecks that hinder the performance of rechargeable zinc electrochemical cells are their limited cycle lifetime and energy density. To overcome these limitations, this work studied the mechanism of a dual-ion Zn-Cu electrolyte to suppress dendritic formation and extend the device cycle life while concurrently enhancing the utilization ratio of zinc and thereby increasing the energy density of zinc ion capacitors (ZICs). The ZICs achieved a best-in-class energy density of 41 watt hour per kilogram with a negative-to-positive (n/p) electrode capacity ratio of 3.10. At the n/p ratio of 5.93, the device showed a remarkable cycle life of 22,000 full charge-discharge cycles, which was equivalent to 557 hours of discharge. The cumulative capacity reached ~581 ampere hour per gram, surpassing the benchmarks of lithium and sodium ion capacitors and highlighting the promise of the dual-ion electrolyte for delivering high-performance, low-maintenance electrochemical energy supplies.

Solvation Engineering via Fluorosurfactant Additive Toward Boosted Lithium-Ion Thermoelectrochemical Cells

Lithium-ion thermoelectrochemical cell (LTEC), featuring simultaneous energy conversion and storage, has emerged as promising candidate for low-grade heat harvesting. However, relatively poor thermosensitivity and heat-to-current behavior limit the application of LTECs using LiPF6 electrolyte. Introducing additives into bulk electrolyte is a reasonable strategy to solve such problem by modifying the solvation structure of electrolyte ions. In this work, we develop a dual-salt electrolyte with fluorosurfactant (FS) additive to achieve high thermopower and durability of LTECs during the conversion of low-grade heat into electricity. The addition of FS induces a unique Li+ solvation with the aggregated double anions through a crowded electrolyte environment, resulting in an enhanced mobility kinetics of Li+ as well as boosted thermoelectrochemical performances. By coupling optimized electrolyte with graphite electrode, a high thermopower of 13.8 mV K-1 and a normalized output power density of 3.99 mW m-2 K-2 as well as an outstanding output energy density of 607.96 J m-2 can be obtained. These results demonstrate that the optimization of electrolyte by regulating solvation structure will inject new vitality into the construction of thermoelectrochemical devices with attractive properties.

3D-hosted lithium metal anodes

Lithium metal anodes are an appealing choice for rechargeable batteries due to their exceptionally high theoretical capacity of about 3860 mA h g-1. However, the uneven plating/stripping of lithium metal anodes leads to serious dendrite growth and low coulombic efficiency, curtailing their practical applications. The 3D scaffold/host strategy emerges as a promising approach that concurrently mitigates volume changes and dendrite growth. This review provides an overview of the regulating mechanisms behind scaffold/host materials for dendrite-free applications, tracing their historical development and recent progress across five key stages: material texture selection, lithiophilic modification, structural design, multi-strategy integration, and practical implementation. Additionally, scaffold/host materials are categorized based on their material texture, with a thorough examination of their respective advantages and drawbacks. Furthermore, this tutorial outlines the obstacles and complexities associated with implementing scaffold/host strategies. Finally, the determining factors that affect the electrochemical performances of scaffold/host materials are discussed, along with possible design criteria and future development prospects. This tutorial aims to provide guidance for researchers on the design of advanced scaffold/host materials for advanced Li metal anodes for batteries.

Lithium metal deposition under the geometrical confinement effect: Dendritic copper foam current collector

Dendrite-free lithium is the ultimate goal in achieving the commercial application of lithium metal anode. In this paper, Dendritic Copper Foam Current Collector (DCFC) is prepared by an electrometallurgy method to realize the homogeneous deposition of lithium metal. The deposition behavior of Cu and Li on different interfaces was studied. Firstly, the Cu dendrites constructed on the surface of Cu foam are induced and formed by the potential oscillation generated by the hydrogen evolution reaction. Secondly, the heterogeneous nucleation model reveals that the reason for the dendrite-free lithium deposition on the dendritic copper foam is the geometrical confinement effect. Compared with commercial copper foam, DCFC with hierarchical structure significantly reduces the nucleation energy and deposition overpotential of lithium metal. The in situ optical microscope observation and finite element simulation results confirm our ideas. Electrochemically, DCFC works stably after 1200 h at a lower potential of 36 mV in a DCFC@Li symmetric battery, which is much superior to 75 mV for just 340 h in Cu foam. The ideal collector with a dendritic structure has broad prospects for the practical application of lithium metal anode.

Regulating the Electrical Double Layer with Supramolecular Cyclodextrin Anions for Dendrite-Free Zinc Electrodeposition

The interfacial stability of a Zn battery is dependent on the electrical double layer (EDL) that forms at the interface between the electrolyte and the Zn metal anode. A fundamental understanding of the regulation of the EDL structure and stability on the Zn surface is highly desirable for practical applications of aqueous batteries. Herein, the interfacial chemistry of the EDL is regulated by the adsorption of supramolecular cyclodextrin anions in the inner Helmholtz plane (IHP). The nucleation overpotential and the charge transfer activation energy for Zn2+ to go through the OHP (Ea1) and IHP (Ea2) are increased, leading to slower Zn2+ transfer kinetics. The electric field distribution and Zn2+ flux in the proximity of the Zn metal surface are homogenized, thus suppressing the growth of dendrites. The mechanism is supported with theoretical and experimental analyses. Consequently, a Zn||Zn symmetric cell achieves an ultrahigh cumulative capacity of 10000 and 4250 mAh cm-2 at a respective current density of 10 and 50 mA cm-2, and an average Coulombic efficiency of 99.5% over 1000 cycles under harsh conditions (at a high current density of 10 mA cm-2 with a high capacity of 10 mAh cm-2). This work provides insight into the introduction of supramolecular anions to regulate the electrical double layer EDL structure and improve the interfacial stability.

MXene-BN-Introduced Artificial SEI to Inhibit Dendrite Growth of Lithium Metal Batteries

Lithiophilic substrates have been shown to improve the electrochemical performance of lithium metal anodes. The MXene-BN/Cu 3D current collector was prepared by a filtration method. The artificial solid electrolyte interface (SEI) layer composed of Li3N and LiF was formed on the surface of MXene-BN/Cu during the Li deposition process. Volume changes can be effectively relieved by this special 3D structure. The artificial SEI film reduced the critical dendrite growth length, inhibited Li dendrite growth, and stabilized the electrochemical cycle. MXene-BN/Cu exhibited highly reversible cycling properties during lithium metal deposition with a high Coulombic efficiency of ∼ 98.0% over 500 cycles. Furthermore, LiBH4 was produced during the Li deposition process. This study presents a promising strategy for developing dendrite-free Li anodes for use in lithium metal batteries.

Overcoming Copper Substrate Thermodynamic Limitations in Anode-Free Lithium Pouch Cells via In Situ Seed Implantation

Anode-free lithium metal batteries (AFLMBs) exhibit enhanced energy density and cost-effective manufacturing, albeit constrained by short lifespans due to inhomogeneous lithium nucleation and growth on the inherently lithiophobic Cu current collector. Although numerous attempts at Cu surface modifications aim to mitigate this thermodynamic limitation, they often result in substantial irreversible capacity loss and/or lack the stability required for practical applications. Here, we present an in situ seed implantation (ISI) strategy to address the aforementioned challenge. A 36 s ISI treatment created an ultrathin lithium metal layer, composed of uniform lithium nuclei with ∼100 nm in diameter, equating to 0.05 mAh cm-2, on the Cu substrate. This approach facilitates dense lithium deposition during cycles, effectively doubling the lifespan of an Ah-level 437 Wh kg-1 AFLMB. Our ISI strategy offers a straightforward and efficient solution that maintains battery energy density and manufacturing cost effectiveness, and its application extends beyond lithium metal.

Study of Na Deposition Formation in Mixed Ethylene: Propylene Carbonate Electrolytes by Inert/Cryoelectron Microscopy

The sodium anode-free combines low-cost and high energy density, demonstrating a promising alternative to the Li battery counterpart. Nevertheless, the uptake of a sodium anode-free battery is greatly impeded by the uncontrollable dendrite proliferation upon the chemically active metallic Na. An insightful mechanistic understanding of Na deposition nucleation and growth behavior in ethylene carbonate and propylene carbonate (EC/PC, 1:1) is revealed via various inert and/or cryo-electron microscopy characterization techniques. The deposit morphology, size, and distribution were studied with different current densities and areal capacity. The Na deposit distribution changes from nonparametric distribution to normal distribution which can be attributed to the effect of interparticle diffusion coupling (IDP). The atomic information on the Na deposit was revealed via cryogenic transmission electron microscopy.

Clarifying the Temperature-Dependent Lithium Deposition/Stripping Process and the Evolution of Inactive Li in Lithium Metal Batteries

The deposition/stripping behavior of lithium metal is intriguing, and the associated formation of inactive lithium at various temperatures remains elusive, which hinders the practical application of lithium metal batteries. Here, utilizing the variable-temperature operando solid-state nuclear magnetic resonance (SS NMR) technique, we reveal the temperature effects on the lithium microstructure evolution in a carbonate-based electrolyte system. In addition, the mass spectrometry titration (MST) method is used to quantify the evolution of inactive lithium components, including dead lithium, solid electrolyte interface (SEI), and lithium hydride (LiH). Combined SS NMR and MST results show that the morphology of lithium metal is reasonably correlated to the amount of inactive Li formed. At low/ambient temperature, the lithium microstructure has a similar evolution pattern, and its poor morphology leads to a large amount of dead lithium, which dominates capacity loss; however, at high temperature large and dense lithium deposits form with less dead Li detected, and the intensified electrolyte consumption in SEI formation is the major cause for capacity loss. Our phase-field simulation results reveal that the compact lithium deposition formed at higher temperature is due to the more uniformly distributed electric field and Li+ concentration. Lastly, two strategies in forming a dense Li deposit are proposed and tested that show performance-enhancing results.

Tailoring grain boundary stability of zinc-titanium alloy for long-lasting aqueous zinc batteries

The detrimental parasitic reactions and uncontrolled deposition behavior derived from inherently unstable interface have largely impeded the practical application of aqueous zinc batteries. So far, tremendous efforts have been devoted to tailoring interfaces, while stabilization of grain boundaries has received less attention. Here, we demonstrate that preferential distribution of intermetallic compounds at grain boundaries via an alloying strategy can substantially suppress intergranular corrosion. In-depth morphology analysis reveals their thermodynamic stability, ensuring sustainable potency. Furthermore, the hybrid nucleation and growth mode resulting from reduced Gibbs free energy contributes to the spatially uniform distribution of Zn nuclei, promoting the dense Zn deposition. These integrated merits enable a high Zn reversibility of 99.85% for over 4000 cycles, steady charge-discharge at 10 mA cm-2, and impressive cyclability for roughly 3500 cycles in Zn-Ti//NH4V4O10 full cell. Notably, the multi-layer pouch cell of 34 mAh maintains stable cycling for 500 cycles. This work highlights a fundamental understanding of microstructure and motivates the precise tuning of grain boundary characteristics to achieve highly reversible Zn anodes.

A Gradient Lithiophilic Structure for Stable Lithium Metal Anodes with Ultrahigh Rate and Ultradeep Capacity

Using three-dimensional current collectors (3DCC) as frameworks for lithium metal anodes (LMAs) is a promising approach to inhibit dendrite growth. However, the intrinsically accumulated current density on the top surface and limited Li-ion transfer in the interior of 3DCC still lead to the formation of lithium dendrites, which can pose safety risks. In this study, it reports that gradient lithiophilic structures can induce uniform lithium deposition within the interior of the 3DCC, greatly suppressing dendrite formation, as confirmed by COMSOL simulations and experimental results. With this concept, a gradient-structured zinc oxide-loaded copper foam (GSZO-CF) is synthesized via an easy solution-combustion method at low cost. The resulting Li@GSZO-CF symmetric cells demonstrate stable cycling performance for over 800 cycles, with an ultra-deep capacity of 10 mAh cm-2 even under an ultra-high current density of 50 mA cm-2 , the top results reported in the literature. Moreover, when combined with a LiFePO4 (LFP) cathode under a low negative/positive (N/P) capacity ratio of 2.9, the Li@GSZO-CF||LFP full cells exhibit stable performance for 200 cycles, with a discharge capacity of 130 mAh g-1 and retention of 85.5% at a charging/discharging rate of 1C. These findings suggest a promising strategy for the development of new-generation LMAs.

Li, Na, K, Mg, Zn, Al, and Ca Anode Interface Chemistries Developed by Solid-State Electrolytes

Solid-state batteries (SSBs) have received significant attention due to their high energy density, reversible cycle life, and safe operations relative to commercial Li-ion batteries using flammable liquid electrolytes. This review presents the fundamentals, structures, thermodynamics, chemistries, and electrochemical kinetics of desirable solid electrolyte interphase (SEI) required to meet the practical requirements of reversible anodes. Theoretical and experimental insights for metal nucleation, deposition, and stripping for the reversible cycling of metal anodes are provided. Ion transport mechanisms and state-of-the-art solid-state electrolytes (SEs) are discussed for realizing high-performance cells. The interface challenges and strategies are also concerned with the integration of SEs, anodes, and cathodes for large-scale SSBs in terms of physical/chemical contacts, space-charge layer, interdiffusion, lattice-mismatch, dendritic growth, chemical reactivity of SEI, current collectors, and thermal instability. The recent innovations for anode interface chemistries developed by SEs are highlighted with monovalent (lithium (Li+ ), sodium (Na+ ), potassium (K+ )) and multivalent (magnesium (Mg2+ ), zinc (Zn2+ ), aluminum (Al3+ ), calcium (Ca2+ )) cation carriers (i.e., lithium-metal, lithium-sulfur, sodium-metal, potassium-ion, magnesium-ion, zinc-metal, aluminum-ion, and calcium-ion batteries) compared to those of liquid counterparts.

Solidification-Controlled Compartmentalization of Bismuth-Tin Colloidal Particles

Nucleation and growth are the main steps of microstructure formation. Nucleation occurs stochastically in a bulk material but can be controlled by introducing or removing catalytic sites, or creating local gradients. Such manipulations can already be implemented to bulk materials at a high level of sophistication but are still challenging on micrometer or smaller scales. Here, we explore the potential to transfer this vast knowledge in classical metallurgy to the fabrication of colloidal particles and report strategies to control phase distribution within a particle by adjusting its solidification conditions. Benefiting from the core-shell structure of liquid metals and the constrained volume of particles, we demonstrate that the same alloy particle can be transformed into a lamellar, composite, Janus, or striped particle by the felicitous choice of the phase separation process pathway. This methodology offers an unprecedented opportunity for the scalable production of compartmentalized particles in high yields that are currently limited to inherently unscalable methods.

Fe3O4-PVDF Composite Network for Dendrite-Free Lithium Metal Batteries

Dendrite growth has been the main trouble preventing the practical application of Li metal anodes. Herein, we present how an Fe3O4-PVDF composite network prepared by using electrospinning has been designed to protect lithium metal anodes effectively. In the symmetrical cells test, the cell with the Fe3O4-PVDF composite network maintains good cycle performance after 600 h (500 cycles) at a current density of 1 mA cm-2 and a plating/stripping capacity of 1 mAh cm-2. The bulky Li dendrite is suppressed and a uniform Li deposition remains after long cycling. The characteristics of this engineered separator are further demonstrated in Li-S full cells with a good cycle performance (capacity of 419 mAh g-1 after 300 cycles at 0.5 C). This work provides a new idea for the protection of lithium metal anodes.

Molecular recognition effect enabled by novel crown ether as macrocyclic host towards highly reversible Zn anode

Aqueous Zn2+ ion batteries present notable advantages, including high abundance, low toxicity, and intrinsic nonflammability. However, they exhibit severe irreversibility due to uncontrolled dendrite growth and corrosion reactions, which limit their practical applications. Inspired by their distinct molecular recognition characteristics, supramolecular crown ethers featuring interior cavity sizes identical to the diameter of Zn2+ ions were screened as macrocyclic hosts to optimize the Zn2+ coordination environment, facilitating the suppression of the reactivity of H2O molecules and inducing the in-situ formation of organic-inorganic hybrid dual-protective interphase. The in-situ assembled interphase confers the system with an "ion-sieving" effect to repel H2O molecules and facilitate rapid Zn2+ transport, enabling the suppression of side reactions and uniform deposition of Zn2+ ions. Consequently, we were able to achieve dendrite-free Zn2+ plating/stripping at 98.4% Coulombic efficiency for approximately 300 cycles in Zn||Cu cell, steady charge-discharge for 1360 h in Zn||Zn symmetric cell, and improved cyclability of 70% retention for 200 cycles in Zn||LMO full cell, outlining a promising strategy to challenge lithium-ion batteries in low-cost, and large-scale applications.

Directing (110) Oriented Lithium Deposition through High-flux Solid Electrolyte Interphase for Dendrite-free Lithium Metal Batteries

Controlling lithium (Li) electrocrystallization with preferred orientation is a promising strategy to realize highly reversible Li metal batteries (LMBs) but lack of facile regulation methods. Herein, we report a high-flux solid electrolyte interphase (SEI) strategy to direct (110) preferred Li deposition even on (200)-orientated Li substrate. Bravais rule and Curie-Wulff principle are expanded in Li electrocrystallization process to decouple the relationship between SEI engineering and preferred crystal orientation. Multi-spectroscopic techniques combined with dynamics analysis reveal that the high-flux CF3 Si(CH3 )3 (F3 ) induced SEI (F3 -SEI) with high LiF and -Si(CH3 )3 contents can ingeniously accelerate Li+ transport dynamics and ensure the sufficient Li+ concentration below SEI to direct Li (110) orientation. The induced Li (110) can in turn further promote the surface migration of Li atoms to avoid tip aggregation, resulting in a planar, dendrite-free morphology of Li. As a result, our F3 -SEI enables ultra-long stability of Li||Li symmetrical cells for more than 336 days. Furthermore, F3 -SEI modified Li can significantly enhance the cycle life of Li||LiFePO4 and Li||NCM811 coin and pouch full cells in practical conditions. Our crystallographic strategy for Li dendrite suppression paves a path to achieve reliable LMBs and may provide guidance for the preferred orientation of other metal crystals.

Influence of Lithium Diffusion into Copper Current Collectors on Lithium Electrodeposition in Anode-Free Lithium-Metal Batteries

The development of "anode-free" lithium-metal batteries with high energy densities is, at present, mainly limited by the poor control of the nucleation of lithium directly on the copper current collector, especially in conventional carbonate electrolytes. It is therefore essential to improve the understanding of the lithium nucleation process and its interactions with the copper substrate. In this study, it is shown that diffusion of lithium into the copper substrate, most likely via the grain boundaries, can significantly influence the nucleation process. Such diffusion makes it more difficult to obtain a great number of homogeneously distributed lithium nuclei on the copper surface and thus leads to inhomogeneous electrodeposition. It is, however, demonstrated that the nucleation of lithium on copper is significantly improved if an initial chemical prelithiation of the copper surface is performed. This prelithiation saturates the copper surface with lithium and hence decreases the influence of lithium diffusion via the grain boundaries. In this way, the lithium nucleation can be made to take place more homogenously, especially when a short potentiostatic nucleation pulse that can generate a large number of nuclei on the surface of the copper substrate is applied.