Novel Metal-Organic Framework (MOF) Based Composite Material for the Sequestration of U(VI) and Th(IV) Metal Ions from Aqueous Environment

Metal-Organic Framework-Based Materials for Adsorption and Detection of Uranium(VI) from Aqueous Solution

The steady supply of uranium resources and the reduction or elimination of the ecological and human health hazards of wastewater containing uranium make the recovery and detection of uranium in water greatly important. Thus, the development of effective adsorbents and sensors has received growing attention. Metal-organic frameworks (MOFs) possessing fascinating characteristics such as high surface area, high porosity, adjustable pore size, and luminescence have been widely used for either uranium adsorption or sensing. Now pertinent research has transited slowly into simultaneous uranium adsorption and detection. In this review, the progress on the research of MOF-based materials used for both adsorption and detection of uranium in water is first summarized. The adsorption mechanisms between uranium species in aqueous solution and MOF-based materials are elaborated by macroscopic batch experiments combined with microscopic spectral technology. Moreover, the application of MOF-based materials as uranium sensors is focused on their typical structures, sensing mechanisms, and the representative examples. Furthermore, the bifunctional MOF-based materials used for simultaneous detection and adsorption of U(VI) from aqueous solution are introduced. Finally, we also discuss the challenges and perspectives of MOF-based materials for uranium adsorption and detection to provide a useful inspiration and significant reference for further developing better adsorbents and sensors for uranium containment and detection.

Multi-walled carbon nanotubes impact on the enantioselective bioaccumulation and toxicity of the chiral insecticide bifenthrin to zebrafish (Danio rerio)

The effects of different multi-walled carbon nanotubes on the enantioselective bioaccumulation and toxicity of the chiral pesticide bifenthrin to zebrafish were investigated in this work. The results showed that MWCNTs and MWCNTs-COOH did not affect the preferential bioaccumulation of 1R-cis-BF in zebrafish following exposure to cis-BF enantiomers for 28 days, but which increased cis-BF accumulation amount by 1.03-1.48 times. Further research demonstrated that the genes related to immunity, endocrine activity and neurotoxicity showed enantioselective expression in different zebrafish tissues, and sex-specific differences were observed. The levels of c-fos, th, syn2a, 17β-hsd and cc-chem were expressed as 1.09-2.84 times higher in females and males treated with 1R-cis-BF than in the 1S-cis-BF-treated groups. However, in the presence of MWCNTs or MWCNTs-COOH, c-fos, th, syn2a, 17β-hsd and cc-chem levels were expressed as 1.53-14.92 times higher in females and males treated with 1S-cis-BF than in 1R-cis-BF-treated groups, which indicated that enantioselective expression was altered. The effects of different types of MWCNTs on the enantioselective bioaccumulation and toxicity of BF in zebrafish have little difference. In summary, the presence of MWCNTs or MWCNTs-COOH increased the impact of BF on zebrafish. Therefore, the risks posed by coexisting nanomaterials and chiral pesticides in aquatic environments should be considered.

Water-Dispersible Porous Aromatic Frameworks with Quasi-Amino Acid Structures via N-H Insertion Reactions

As a class of materials with large specific surface area and chemical stability, porous aromatic frameworks (PAFs) have attracted much attention in the fields of gas adsorption, separation, and catalysis. However, synthetic methods for PAFs have been limited to a few coupling reactions, and PAF powders were usually obtained with a diameter of micrometer size. Here, we demonstrate an efficient N-H insertion reaction of diazoesters in the synthesis of PAFs with a diameter <200 nm. The established polymerization can be performed at room temperature, and four PAFs with different skeletons and composition can be obtained in high yields. The prepared PAFs have appreciable thermal and chemical stabilities. Because of the presence of ester groups in the backbone, the prepared PAFs with α-phenylglycine fragments can be easily obtained through the successive hydrolysis of the ester groups. The synthesized PAFs bearing phenylglycine moieties exhibit good water dispersibility and low cytotoxicity. We further show the potential of these PAFs in drug loading and photodynamic therapy.

Nano Metal-Containing Photocatalysts for the Removal of Volatile Organic Compounds: Doping, Performance, and Mechanisms

Volatile organic compounds (VOCs) in indoor air are considered a major threat to human health and environmental safety. The development of applicable technologies for the removal of VOCs is urgently needed. Nowadays, photocatalytic oxidation (PCO) based on metal-containing photocatalysts has been regarded as a promising method. However, unmodified photocatalysts are generally limited in applications because of the narrow light response range and high recombination rate of photo-generated carriers. As a result, nano metal-containing photocatalysts doped with elements or other materials have attracted much attention from researchers and has developed over the past few decades. In addition, different doping types cause different levels of catalyst performance, and the mechanism for performance improving is also different. However, there are few reviews focusing on this aspect, which is really important for catalyst design and application. This work aims to give a comprehensive overview of nano metal-containing photocatalysts with different doping types for the removal of VOCs in an indoor environment. First, the undoped photocatalysts and the basic mechanism of PCO is introduced. Then, the application of metal doping, non-metal doping, co-doping, and other material doping in synthetic metal-containing photocatalysts are discussed and compared, respectively, and the synthesis methods, removal efficiency, and mechanisms are further investigated. Finally, a development trend for using nano metal-containing photocatalysts for the removal of VOCs in the future is proposed. This work provides a meaningful reference for selecting effective strategies to develop novel photocatalysts for the removal of VOCs in the future.

A comparative investigation of uranium and thorium adsorption behavior on amidoximated copolymeric hydrogel

This work focuses on investigating the feasibility of using a crosslinked amidoximated copolymeric hydrogel as a potential adsorbent to recover uranium and thorium ions from aqueous media. The hydrogel was synthesized via gamma-irradiation copolymerization and characterized through FTIR, TGA, and SEM. The medium acidity notably affected the adsorption capacity of both ions. The adsorption data was in line with the pseudo-1st-order equation and the Freundlich isothermal model. The thermodynamics analysis showed that the temperature rise promoted the adsorption capacity. The reusability studies highlighted the good performance of the hydrogel up to five regeneration rounds.

Recent advances in magnetic composites as adsorbents for wastewater remediation

The scarcity of clean drinking water combined with other environmental and anthropogenic effects necessitates the demand for development of advanced technology for cleaning polluted water. Adsorption is one such technique that does not produce toxic byproducts and solves the problem of cleaning contaminated water at a lower cost. In recent years, magnetic composites, as adsorbent, have gained lot of attention due to their reusability which makes them sustainable and economical. This review article describes the challenges related to water quality, scarcity and then summarizes the current treatment technologies and advancement in the field of adsorption to resolve the prevailing concerns. The review includes an insight into the recent research being carried out in the field of magnetic composites and nanocomposites, as adsorbent, covering, probably, all aspects of what is going around the globe. Different materials, like polymers, biomaterials, clays and metal organic framework (MOF)-based magnetic composites and their applications in wastewater treatment processes have been included. The article is a comprehensive review on the application of different materials to detoxify various diverse pollutants with prime focus on magnetic composites. The thorough study of this review will surely bring upcoming researchers closer to the future possibilities of research in wastewater treatment.

State-of-the-art progress for the selective crystallization of actinides, synthesis of actinide compounds and their functionalization

Crystallization and immobilization of actinides to form actinide compounds are of significant importance for the extraction and reutilization of nuclear waste in the nuclear industry. In this paper, the state-of-art progress in the crystallization of actinides are summarized, as well as the main functionalization of the actinide compounds, i.e., as adsorbents for heavy metal ions and organic pollutant in waste management, as (photo)catalysts for organic degradation and conversion, including degradation of organic dyes and antibiotics, dehydrogenation of N-heterocycles, CO₂ cycloaddition, selective alcohol oxidation and selective oxidation of sulfides. This review will give a comprehensive summary about the synthesis and application exploration of solid actinide crystalline salts and actinide-based metal organic frameworks in the past decades. Finally, the future perspectives and challenges are proposed in the end to give a promising direction for future investigation.

Highly efficient functionalized MOF-LIC-1 for extraction of U(VI) and Th(IV) from aqueous solution: experimental and theoretical studies

A set of four new functionalized MOFs, namely MOF-LIC-DPPC, MOF-LIC-GA, MOF-LIC-PCA and MOF-LIC-SA, were synthesized via the post-synthetic modification (PSM) strategy using MOF-LIC-1 for efficient extraction of U(VI) and Th(IV) from an aqueous medium. FTIR, powder XRD, TGA and SEM-EDX were employed for characterization of the functionalized MOFs. Sorption studies for U(VI) and Th(IV) were performed by monitoring the pH and contact time. Interestingly, the modified MOF-LIC-SA displayed rapid (∼5 min) and efficient extraction towards U(VI) and Th(IV) from an aqueous medium and modified MOF-LIC-DPPC displayed enhanced thermal stability (600 °C) compared with the parent MOF-LIC-1 (450 °C). These studies revealed that the grafted functionalities on MOF-LIC-1 possess enhanced sorption efficiency towards U(VI) and Th(IV) as well as thermal stability. MOF-LIC-SA exhibited the highest sorption capacity towards U(VI) and Th(IV), viz. 298 mg g^-1 (pH 6) and 149 mg g^-1 (pH 6), respectively. Leaching, recyclability, and radiation stability studies were also performed using MOF-LIC-1 MOFs. Additionally, we investigated the nature of U(VI) interactions on MOFs by applying density functional theory (DFT). PSM MOFs with various functionalities display high selectivity and efficient extraction of U(VI) and Th(IV) over a wide pH range (2-9) and also exhibit easy recovery of metal ions from MOFs. These studies reveal that U(VI) and Th(IV) can be extracted from aqueous streams in a pH range from 6 to 8 and potential applications of these MOFs include recovery of U(VI) and Th(IV) from mine water, sea water, etc. The studies reported in the present work also have extensive potential applications for environmental concerns as well as in the nuclear industry.

Ionic Liquid Agar-Alginate Beads as a Sustainable Phenol Adsorbent

Cleaning wastewater containing low concentrations of phenolic compounds is a challenging task. In this work, agar–alginate beads impregnated with trihexyltetradecylphosphonium bromide ([P₆₆₆₁₄][Br]) ionic liquid adsorbent were synthesized as a potential adsorbent for such applications. FTIR, TGA, SEM, EDX and PZC studies were performed to characterize and understand the physicochemical properties of the adsorbent. The Fourier transformation infrared spectroscopy (FTIR) study showed that [P₆₆₆₁₄][Br] ionic liquid was effectively incorporated into the agar–alginate structure. TGA and SEM confirmed comparative enhanced thermal stability and porous surface, respectively. Chemical reaction rate-altering parameters, i.e., pH, contact time, initial phenol concentration and temperature, are optimized at highest phenol removal. It was found that the maximum phenol adsorption capacity and highest removal efficiency by the adsorbent occurred at pH 2, initial phenol concentration of 150 mg/L, beads dosage of 6 mg/mL and contact time of 2 h with values of 16.28 mg/g and 65.12%, respectively. The pseudo-second order model fitted the adsorption kinetics well, and the Freundlich isotherm model gave the experimental data the best fit. Analysis of thermodynamic data demonstrated that the adsorption process is fundamentally exothermic in nature, and low temperature favors spontaneity of the chemical reaction. Regeneration studies indicated that the adsorbent can at least be used for four cycles in such applications without any considerable loss in adsorption efficiency.

A reversible and efficient probe for dual mode recognition of Al3+ and Cu2+ with logic gate behaviour: Crystal structure, theoretical and in-vivo bio-imaging investigations

This work presents the synthesis, characterization, crystal structure and spectroscopic investigations of isophthalohydrazide based probe. Among various tested metal ions, the probe selectively detects Al³⁺ and Cu²⁺ in aqueous ethanol via fluorometric and colorimetric methods, respectively. It displays a fluorescence "turn-on" response with Al³⁺ and visual colour change from colourless to yellow with Cu²⁺. Sensing mechanism is explored with UV-Vis, fluorescence spectroscopy and ¹H NMR titration, and confirmed with computational results. Suppression of CN isomerization and photo-induced electron transfer (PET) along with chelation enhanced fluorescence emission (CHEF) result in "turn-on" fluorescence with Al³⁺ while ligand to metal charge transfer (LMCT) accounts for visual colour change with Cu²⁺. Job's plot and HRMS confirm 1:2 (L:M) stoichiometry. The probe also exhibits efficient reversibility and reproducibility with EDTA which are successfully mimicked with combinatorial logic gate and truth table. Additionally, solid state applications and bio-imaging investigation on gut tissue of Drosophila 3rd instar larvae are performed.

Magnetic polyphenol nanocomposite of Fe3O4/SiO2/PP for Cd(II) adsorption from aqueous solution

In order to solve the water solubility and difficult re-use of plant polyphenol (PP) in Cd(II) adsorption, PP was immobilized on the surface of magnetic material in this study. A core-shell nanocomposite Fe₃O₄/SiO₂/PP (∼18 nm) was synthesized with 3-8 nm SiO₂ and 2-5 nm PP. TGA analysis revealed the PP coating amount was 2.39%. VSM detection suggested that saturation magnetization of Fe₃O₄/SiO₂/PP was 45.94 emu/g. The adsorption equilibrium was reached in 2 h and the adsorption kinetics followed a pseudo-second-order model. The adsorption data fitted well to a Langmuir isotherm, achieving a 98.6% of Cd(II) removal at 0.6 g, pH 7.0, 298 K and 160 rpm. The adsorption capacity of Cd(II) on Fe₃O₄/SiO₂/PP highly depended on the pH. The adsorption capacity increased as the initial solution pH was increased in the range of 3.0-8.0. The adsorbed Cd(II) on Fe₃O₄/SiO₂/PP could be effectively desorbed by 0.1 mol/L of HNO₃ and the Fe₃O₄/SiO₂/PP still maintained a stable adsorption capacity after five cycles. The adsorption mechanism of Cd(II) on Fe₃O₄/SiO₂/PP is mainly dependent on complexation and electrostatic adsorption from the FTIR and XPS analyses. This study provided a new way for PP to remove Cd(II) from aqueous solution.

Facile immobilization of ethylenediamine tetramethylene-phosphonic acid into UiO-66 for toxic divalent heavy metal ions removal: An experimental and theoretical exploration

By the facile immobilization of ethylenediamine tetramethylene-phosphonic acid (EDTMPA) onto the surface and into the defects of UiO-66, a stable and efficient adsorbent named UiO-66-EDTMPA was obtained for the first time. In terms of removing aqueous heavy metal ions (Pb²⁺, Cd²⁺, Cu²⁺), the maximum adsorption capacities of UiO-66-EDTMPA reached 558.67, 271.34 and 210.89 mg/g, which were 8.77 (Pb²⁺), 5.63 (Cd²⁺) and 5.19 (Cu²⁺) times higher than raw UiO-66 respectively. The adsorption behavior of three heavy metal ions on UiO-66 and UiO-66-EDTMPA were investigated and compared through batch control experiments and theoretical studies. The main factors on adsorption progress (i.e., the dosage of EDTMPA, pH, ionic strength, co-existing ions, initial concentration, contact time, temperature) were explored, and the critical characterization (i.e., SEM, TEM, XRD, FT-IR, TG-DTG, XPS, N₂ adsorption-desorption test) were performed. Molecular dynamics (MD) simulation (radial distribution functions (RDF) and mean square displacement (MSD)) were also applied to reveal the adsorption behavior. Besides, two new quantum chemical analyses (Hirshfeld surface and independent gradient model (IGM)) were introduced into the interaction analysis between UiO-66 and EDTMPA. The complete results showed that (1) where the hydrogen bond and (vdW) connect EDTMPA to UiO-66. (2) The coordination between O, N atoms of EDTMPA and heavy metal ions (Pb²⁺, Cd²⁺, Cu²⁺) resulted in spontaneous adsorption. (3) The adsorption behavior agreed with Langmuir and pseudo-second-order model, endothermic reaction. In addition, the desorption and reusability study showed promising stable and sustainable performance. This work has some guiding significance for the experimental and theoretical study of removing heavy metal ions from aqueous solutions by MOF or modified MOF materials.

Application of hybrid MOF composite in extraction of f-block elements: Experimental and computational investigation

An attempt was made to understand the sorption behaviour of UO₂²⁺, Th⁴⁺ and Eu³⁺ on novel hybrid metal-organic framework composites, FeBDC@CoBDC. The XRD pattern revealed the composite nature of the hybrid MOF materials, while FTIR and Raman spectroscopic analyses evidenced the presence of different functional moieties. The thermal stability of the hybrid MOF composites was investigated through thermogravimetric analysis. The sorption predominantly followed Langmuir isotherm with sorption capacity of 189 mg g^-1, 224 mg g^-1 and 205 mg g^-1 for UO₂²⁺, Th⁴⁺ and Eu³⁺ respectively. The sorption proceeded through chemisorption following pseudo 2^nd order rate kinetics. The processes were found to be thermodynamically favourable and endothermic in nature. However, they were entropically driven. Multiple contacts of complexing agents were necessary for quantitative elution of f-elements from loaded MOF. The MOF showed moderate stability towards radiation exposure. DFT calculation was used for the optimization of structures, estimation of bond length and estimation of binding energy. In hybrid MOF composites, the Fe atom was having six coordination with 4 O atoms of BDC moieties and 2 O atoms of -OH groups. The O atoms of BDC and -OH groups were coordinated to Eu, Th and U atoms during their sorption.

Synthesis of core-shell magnetic metal organic frameworks composite for efficient uranium (VI) removal

The combination of magnetic nanoparticles and metal-organic frameworks (MOFs) has demonstrated their prospective for pollutant sequestration. In this work, Fe3O4@SiO2@UiO-66 core-shell magnetic microspheres were synthesized and used for the removal...

Phosphate group functionalized magnetic metal-organic framework nanocomposite for highly efficient removal of U(VI) from aqueous solution

The phosphate group functionalized metal-organic frameworks (MOFs) as the adsorbent for removal of U(VI) from aqueous solution still suffer from low adsorption efficiency, due to the low grafting rate of groups into the skeleton structure. Herein, a novel phosphate group functionalized metal-organic framework nanoparticles (denoted as Fe₃O₄@SiO₂@UiO-66-TPP NPs) designed and prepared by the chelation between Zr and phytic acid, showing fast adsorption rate and outstanding selectivity in aqueous media including 10 coexisting ions. The Fe₃O₄@SiO₂@UiO-66-TPP was properly characterized by TEM, FT-IR, BET, VSM and Zeta potential measurement. The removal performance of Fe₃O₄@SiO₂@UiO-66-TPP for U(VI) was investigated systematically using batch experiments under different conditions, including solution pH, incubation time, temperature and initial U(VI) concentration. The adsorption kinetics, isotherm, selectivity studies revealed that Fe₃O₄@SiO₂@UiO-66-TPP NPs possess fast adsorption rates (approximately 15 min to reach equilibrium), high adsorption capacities (307.8 mg/g) and outstanding selectivity (S_u = 94.4%) towards U(VI), which in terms of performance are much better than most of the other magnetic adsorbents. Furthermore, the adsorbent could be reused for U(VI) removal without obvious loss of adsorption capacity after five consecutive cycles. The research work provides a novel strategy to assemble phosphate group-functionalized MOFs.

Artificial intelligence (AI) applications in adsorption of heavy metals using modified biochar

The process of removal of heavy metals is important due to their toxic effects on living organisms and undesirable anthropogenic effects. Conventional methods possess many irreconcilable disadvantages pertaining to cost and efficiency. As a result, the usage of biochar, which is produced as a by-product of biomass pyrolysis, has gained sizable traction in recent times for the removal of heavy metals. This review elucidates some widely recognized harmful heavy metals and their removal using biochar. It also highlights and compares the variety of feedstock available for preparation of biochar, pyrolysis variables involved and efficiency of biochar. Various adsorption kinetics and isotherms are also discussed along with the process of desorption to recycle biochar for reuse as adsorbent. Furthermore, this review elucidates the advancements in remediation of heavy metals using biochar by emphasizing the importance and advantages in the usage of machine learning (ML) and artificial intelligence (AI) for the optimization of adsorption variables and biochar feedstock properties. The usage of AI and ML is cost and time-effective and allows an interdisciplinary approach to remove heavy metals by biochar.

A dye encapsulated zinc-based metal-organic framework as a dual-emission sensor for highly sensitive detection of antibiotics

Self-assembly of two Zn-MOFs, [Zn₂L(DMF)₃]·H₂O·5DMF (1) and [Zn₂L(H₂O)₂]·4H₂O·3DMF (2), was achieved with an amide-functionalized tetracarboxylate ligand under similar conditions. Incorporated amide groups make the tetratopic linkers exhibit different configurations, tetrahedron and square, and subsequently combine tetrahedral [Zn₂(CO₂)₄] clusters or square paddle-well [Zn₂(CO₂)₄] clusters to afford a lon net for 1 and a nbo net for 2. Remarkably, 2 demonstrated high porosity and amide group decorated cages, and thereby proved to be a good capturing agent for a fluorescent dye molecule (DMASM). Consequently, a dual-emitting DMASM@2 sensor was successfully fabricated based on effective energy transfer from the host framework to DMASM with the variable luminescent color being visible to the naked eye. DMASM@2 could be used for the detection of metronidazole (MDZ) and dimetridazole (DTZ) with high sensitivity and remarkable recyclability.

UiO-66-NH-(AO) MOFs with a New Ligand BDC-NH-(CN) for Efficient Extraction of Uranium from Seawater

Metal-organic frameworks (MOFs) with a high surface area and excellent stability are potential candidates for uranium (U) adsorption. Amidoxime (AO) is the most widely used functional group to extract U, which is usually introduced into MOFs by two-step post-synthetic methods (PSMs). Herein, MOF UiO-66-NH-(AO) was obtained by a one-step PSM with amidoximation from UiO-66-NH-(CN), which was synthesized by a new organic ligand of 2-cyano-terephthalic acid and whose morphology was octahedron and could be well controlled with the new ligand. The one-step PSM can greatly maintain the octahedron of the MOFs. What is more, UiO-66-NH-(AO) showed good adsorption performance for U, the adsorption equilibrium was obtained within 1500 min, and the adsorption capacity of U was calculated to be 134.1 mg/g according to the Langmuir model. It also had excellent selectivity for U in the presence of high concentrations of vanadium (V), ferrum (Fe), magnesium (Mg), calcium (Ca), and zirconium (Zr). The adsorption capacity of U in natural seawater was determined to be 5.2 mg/g within 8 days. The recyclability of UiO-66-NH-(AO) in simulated seawater was demonstrated for at least four adsorption/desorption cycles. The binding mechanism was investigated by the extended X-ray absorption fine structure spectroscopy, revealing that U binding occurs in a fashion η² motif. This study provides a reliable idea for the modification of MOFs and the potential for MOF-based materials to extract U from seawater.

Metal-organic frameworks as superior porous adsorbents for radionuclide sequestration: Current status and perspectives

Efficient separation of hazardous radionuclides from radioactive waste remains a challenge to the global acceptance of nuclear power due to complex nature of the waste, high radiotoxicities and presence of large number of interfering elements. Sorption of radioactive elements from liquid phase, gas phase or their solid particulates on various synthetic organic, inorganic or biological sorbents is looked as one of the options for their remediation. In this context, highly porous materials, termed as metal-organic frameworks (MOFs), have shown promise for efficient capturing of various types of radioactive elements. Major advantages that have been advocated for the application of MOFs in radionuclide sorption are their excellent chemical stability, and their large surface area due to abundant functional groups, and porosity. In this review, recent developments on the application of MOFs for radionuclide sequestration are briefly discussed. Focus has been devoted to address the separation of few crucial radioactive elements such as Th, U, Tc, Re, Se, Sr and Cs from aqueous solutions, which are important for liquid radioactive waste management. Apart from these radioactive metal ions, removal of radionuclide bearing gases such as I₂, Xe, and Kr are also discussed. Aspects related to the interaction of MOFs with the radionuclides are also discussed. Finally, a perspective for comprehensive investigation of MOFs for their applications in radioactive waste management has been outlined.

Multifunctional Two-Dimensional Metal-Organic Frameworks for Radionuclide Sequestration and Detection

Two lanthanide-containing porous coordination polymers, [Ln₂(bpdc)₆(phen)₂]·nH₂O (1) and [Ln₂(bpdc)₆(terpy)₂]·3H₂O (2) (Ln = Pr, Nd, or Sm-Dy; bpdc: 2,2'-bipyridine-5,5'-dicarboxylic acid; phen: 1,10-phenanthroline; and terpy: 2,2':6',2″-terpyridine), have been hydrothermally synthesized and structurally characterized by powder and single-crystal X-ray diffraction. Crystallographic analyses reveal that compounds 1 and 2 feature Ln³⁺-containing dimeric nodes that form a porous two-dimensional (2D) and nonporous three-dimensional (3D) framework, respectively. Each material is stable in aqueous media between pH 3 and 10 and exhibits modest thermal stability up to ∼400 °C. Notably, a portion of the phen and bpdc ligands in 1 can be removed thermally, without compromising the crystal structure, causing the surface area and pore volume to increase. The optical properties of 1 and 2 with Gd³⁺, Sm³⁺, Tb³⁺, and Eu³⁺ are explored in the solid state using absorbance, fluorescence, and lifetime spectroscopies. The analyses reveal a complex blend of metal and ligand emission in the materials containing Sm³⁺ and Tb³⁺, while those featuring Eu³⁺ are dominated by intense metal-based emission. Compound 1 with Eu³⁺ shows promise for the capture and detection of the uranyl cation (UO₂)²⁺ from aqueous media. In short, uranyl capture is observed at pH 4, and the adsorption thereof is detectable via vibrational and fluorescence spectroscopies and colorimetrically as the off-white color of 1 turns yellow with uptake. Finally, both 1 and 2 with Eu³⁺ produce bright red emission upon irradiation with Cu Kα X-ray radiation (8.04 keV) and are candidate materials for applications in solid-state scintillation.

Metal-Organic-Framework Based Functional Materials for Uranium Recovery: Performance Optimization and Structure/Functionality-Activity Relationships

Uranium recovery has profound significance in both uranium resource acquisition and pollution treatment. In recent years, metal-organic frameworks (MOFs) have attracted much attention as potential uranium adsorbents owing to their tunable structural topology and designable functionalities. This review explores the research progress in representative classic MOFs (MIL-101, UiO-66, ZIF-8/ZIF-67) and other advanced MOF-based materials for efficient uranium extraction in aqueous or seawater environments. The uranium uptake mechanism of the MOF-based materials is refined, and the structure/functionality-property relationship is further systematically elucidated. By summarizing the typical functionalization and structure design methods, the performance improvement strategies for MOF-based adsorbents are emphasized. Finally, the present challenges and potential opportunities are proposed for the breakthrough of high-performance MOF-based materials in uranium extraction.

Enhanced uranium removal from acidic wastewater by phosphonate-functionalized ordered mesoporous silica: Surface chemistry matters the most

The removal of uranium species from aqueous phases using non-hazardous chemicals is still an open challenge, and remediation by adsorption is a prosperous strategy. Among the most crucial concerns regarding the design of an efficient material as adsorbent are, except the cost and the green character, the feasibility to be stable and effective under acidic pH, and to selectively adsorb the desired metal ion (e.g. uranium). Herein, we present a phosphonate functionalized ordered mesoporous silica (OMS-P), prepared by a one-step co-condensation synthesis. The physicochemical features of the material were determined by HR-TEM, XPS, EDX, N₂ sorption, and solid NMR, while the surface zeta potential was also measured. The removal efficiency was evaluated at two different temperatures (20 and 50 °C) in acidic environment to avoid interferences like solid phase formation or carbonate complexation and the adsorption isotherms, including data fitting with Langmuir and Freundlich models and thermodynamic parameters are presented and discussed. The high and homogeneous dispersion of the phosphonate groups within the entire silica's structure led to the greatest reported up-todays capacity (345 mg/g) at pH = 4, which was achieved in less than 10 min. Additionally, OMS-P showed that the co-presence of other polyvalent cation like Eu(III) did not affect the efficiency of adsorption, which occurs via inner-sphere complex formation. The comparison to the non-functionalized silica (OMS) revealed that the key feature towards an efficient, stable, and selective removal of the U(VI) species is the specific surface chemistry rather than the textural and structural features. Based on all the results and spectroscopic validations of surface adsorbed U(VI), the main interactions responsible for the elevated uranium removal were proposed.

Fe3O4@PAA@UiO-66-NH2 magnetic nanocomposite for selective adsorption of Quercetin

In the present study, a magnetic core-shell metal-organic framework (Fe₃O₄@PAA@UiO-66-NH₂) nanocomposite was synthesized by a facile step-by-step self-assembly technique and used for selective adsorption of the anti-cancer Quercetin (QCT) drug. The synthesized nanocomposite was well characterized using FTIR, XRD, BET, FESEM, and TEM techniques. The adsorption kinetics and isotherms of the magnetic nanocomposites for QCT were investigated in detail at different initial concentrations and temperatures. It was found that the experimental adsorption kinetic and isotherm data were precisely explained by the pseudo-second-order kinetic and Langmuir isotherm models. Moreover, the selective adsorption ability of the synthesized nanocomposite against various drugs in the single, binary, and ternary solutions containing QCT, Curcumin (CUR), and Methotrexate (MTX) drugs was also studied. The synthesized adsorbent showed good adsorption selectivity for QCT against CUR and MTX. The adsorption mechanism of QCT on the nanocomposite might be related to the hydrogen bonding and hydrophobic-hydrophobic interactions via π-π stacking interactions between the benzene ring skeleton of QCT and the aromatic structure of the adsorbent nanoparticles. The regeneration and reusability studies demonstrated that the developed adsorbent sustained good structural stability and adequate adsorption capacity for QCT after ten consecutive adsorption-desorption cycles.

An anionic potassium-organic framework for selective removal of uranyl ions

Effective and selective removal of radioactive metal ions from aqueous solutions is of great importance due to their harmful effects on humans and other living species. However, it is a big challenge for researchers to develop effective adsorbents with high selectivity and a wide pH application range even if some progress has been achieved. Herein, we report an anionic potassium organic framework (UPC-K1) with protonated dimethylamine (Me2NH2+) residing inside the rhomboid channels. The unique 3D firm structure of UPC-K1 is constructed by the cross-linking of the 2D arrangement using weak K-O bonds (2.9270 Å) and strong hydrogen bonds (1.6498 Å), which endows it with excellent chemical stability in organic solvents, boiling water, and aqueous solution in the pH range 3-10. Based on the cation exchange, depending on pore size selectivity, UPC-K1 shows excellent adsorption performance towards UO22+ in aqueous solutions at 298 K with the following characteristics: (1) effective removal in the pH range 3-10; (2) high selectivity over other metal cations; (3) a high adsorption capacity of 551.4 mg g-1; (4) a rapid adsorption equilibrium within 3 hours under stirring; and (5) effective adsorption at low concentrations, with a residual concentration of 0.69 ppm even at an initial concentration of 10.3 ppm after stirring for 24 hours. These results indicate the great potential of UPC-K1 in the treatment of uranium-containing nuclear wastewater.

Achieving highly efficient and selective cesium extraction using 1,3-di-octyloxycalix[4]arene-crown-6 in n-octanol based solvent system: experimental and DFT investigation

Due to the long half-life of ¹³⁷Cs (t_1/2 ∼ 30 years), the selective extraction of cesium (Cs) from high level liquid waste is of paramount importance in the back end of the nuclear fuel cycle to avoid long term surveillance of high radiotoxic waste. As 1,3-di-octyloxycalix[4]arene-crown-6 (CC6) is suggested to be a promising candidate for selective Cs extraction, the improvement in the Cs extraction efficiency by CC6 has been investigated through the optimization of the effect of dielectric media on the extraction process. The effects of the feed acid (HNO₃, HCl, and HClO₄) and the composition of the diluents for the ligand in the organic phase on the extraction efficiency of Cs have been investigated systematically. In 100% n-octanol medium, Cs is found to form a 1 : 1 ion-pair complex with CC6 (0.03 M) providing a very high distribution ratio of D_Cs ∼ 22, suggesting n-octanol as the most suitable diluent for Cs extraction. No significant interference of other relevant cations such as Na, Mg and Sr was observed on the D_Cs value in the optimized solvent system. Density functional theory (DFT) based calculations have been carried out to elucidate the reason of ionic selectivity and enhanced Cs extraction efficiency of CC6 in the studied diluent systems. In addition to the ionic size-based selectivity of the crown-6 cavity, the polarity of the organic solvent system, the hydration energy of the ion, and the relative reorganization of CC6 upon complexation with Cs are understood to have roles in achieving the enhanced efficiency for the extraction of Cs by the CC6 extractant in nitrobenzene medium.

Separation scheme was developed for selective extraction of long-lived fission product ¹³⁷Cs using substituted calix crown 6 ether from aqueous acidic solution.

Studying the Adsorptive Behavior of Poly(Acrylonitrile-co-Styrene) and Carbon Nanotubes (Nanocomposites) Impregnated with Adsorbent Materials towards Methyl Orange Dye

In this study, a polymeric (acrylonitrile-co-styrene) P(AN-co-St) composite was impregnated with adsorbents, such as sulfonated and multiwall carbon nanotubes (MWCNTs), to increase the adsorptive characteristics of the nanocomposite upon the removal of methyl orange (MO) dye under different conditions. A novel nanocomposite copolymer mixture of P(AN-co-St) and SP(AN-co-St) was used. MWCNTs were prepared by a low-cost chemical vapor deposition (CVD) process. Variation in MO adsorption onto the three nanocomposites was examined in an aqueous solution via the batch technique with respect to contact time, initial MO concentration, adsorbent dosage, pH, and temperature. The surface of the nanocomposites was characterized by a scanning electron microscope (SEM), particle size distribution (PSD), Fourier transform infrared (FTIR), and Raman analysis. The experimental data showed that the efficiency of P(AN-co-St)/ MWCNT removal increased under the conditions of an acidic pH (3 and 5) with an agitation speed of 140 rpm, a sorbent weight of 0.01 g, and 20 mg of initial dye. The maximum sorption capacities were 121.95, 48.78, and 47.84 mg g-1 for the P(AN-co-St)/ MWCNTs, SP(AN-co-St), and P(AN-co-St) composites, respectively, as assessed by the Langmuir model. Additional isotherm models, such as the Freundlich, Temkin, and Halsey models, were used to examine the experimental data. A pseudo-second-order model was found to be more fitting for describing the sorption.

Removal of Uranyl Ion from Wastewater by Magnetic Adsorption Material of Polyaniline Combined with CuFe2O4

The magnetic adsorption material of polyaniline (PANI) with amino functional group combined with CuFe2O4 (CuFe2O4/PANI nanocomposite) has been described in this work. It has been characterized by TEM, XRD, XPS, BET, FTIR, and VSM, respectively. Significantly, it exhibits extremely high maximum adsorption capacity (322.6 mg/g) for removal of uranyl ions from wastewater at a pH of 4. The adsorption process is consistent with the quasisecond-order kinetic equation, and the isotherm and kinetic data are accurately described by the Langmuir isothermal adsorption model. Furthermore, the magnetic CuFe2O4/PANI displays stable adsorption performance for uranyl ions after five cycles of recovery in acid medium, which indicates it possesses good recovery due to its magnetism and excellent regeneration ability for reusability.

Efficient removal of heavy metals from polluted water with high selectivity for Hg(ii) and Pb(ii) by a 2-imino-4-thiobiuret chemically modified MIL-125 metal-organic framework

A highly porous adsorbent based on a metal-organic framework was successfully designed and applied as an innovative adsorbent in the solid phase for the heavy metal removal. MIL-125 was densely decorated by 2-imino-4-thiobiuret functional groups, which generated a green, rapid, and efficacious adsorbent for the uptake of Hg(ii) and Pb(ii) from aqueous solutions. ITB-MIL-125 showed a high adsorption affinity toward mercury(ii) ions of 946.0 mg g-1 due to covalent bond formation with accessible sulfur-based functionality. Different factors were studied, such as the initial concentration, pH, contact time, and competitive ions, under same circumstances at the room temperature. Moreover, the experimental adsorption data were in excellent agreement with the Langmuir adsorption isotherm and pseudo-second order kinetics. At a high concentration of 100 ppm mixture of six metals, ITB-MIL-125 exhibited a high adsorption capacity, reaching more than 82% of Hg(ii) compared to 62%, 30%, 2%, 1.9%, and 1.6% for Pb(ii), Cu(ii), Cd(ii), Ni(ii), and Zn(ii), respectively.

Semiconducting CuxNi3-x(hexahydroxytriphenylene)2 framework for electrochemical aptasensing of C6 glioma cells and epidermal growth factor receptor

A 2D CuNi metal-organic framework (MOF) named CuxNi3-x(HHTP)2 was synthesized with 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) as the linker and was used as a sensitive scaffold to adsorb aptamer strands for the electrochemical detection of living C6 glioma cells and one of their biomarkers, epidermal growth factor receptor (EGFR). Different from conventional MOFs, the CuxNi3-x(HHTP)2 MOF comprises long-range delocalized electrons, a graphene-analog nanostructure, multiple metal states (Cu0/Cu+/Cu2+ and Ni2+/Ni3+), and abundant oxygen vacancies. With these features, the CuxNi3-x(HHTP)2 MOF anchored a large amount of C6 cell-targeted aptamer strands via coordination among metal centers, oligonucleotides, π-π stacking, and van der Waals force. The CuxNi3-x(HHTP)2-based cytosensor showed a low limit of detection (LOD) of 21 cells mL-1 toward C6 glioma cells within a wide range from 50 cells mL-1 to 1 × 105 cells mL-1. Moreover, the proposed aptasensor displayed high selectivity, good stability, acceptable reproducibility, and a low LOD of 0.72 fg mL-1 for detecting EGFR with the concentration ranging from 1 fg mL-1 to 1 ng mL-1. The aptasensor based on the CuxNi3-x(HHTP)2 MOF exhibited superior sensing performance over those based on its monometallic analogues such as Cu3(HHTP)2 MOF and Ni3(HHTP)2 MOF. Hence, this sensing strategy based on a bimetallic semiconducting MOF shows great potential for cancer diagnosis.