Active Species and Mechanistic Pathways in Iron-Catalyzed C–C Bond-Forming Cross-Coupling Reactions

Recent Advances on Mechanistic Studies on C–H Activation Catalyzed by Base Metals

During the last ten years, base metals have become very attractive to the organometallic and catalytic community on activation of C-H bonds for their catalytic functionalization. In contrast to the statement that base metals differ on their mode of action most of the manuscripts mistakenly rely on well-studied mechanisms for precious metals while proposing plausible mechanisms. Consequently, few literature examples are found where a thorough mechanistic investigation have been conducted with strong support either by theoretical calculations or experimentation. Therefore, we consider of highly scientific interest reviewing the last advances on mechanistic studies on Fe, Co and Mn on C-H functionalization in order to get a deep insight on how these systems could be handle to either enhance their catalytic activity or to study their own systems in a similar systematic fashion. Thus, in this review we try to cover the most insightful articles for mechanistic studies on C-H activation catalyzed by Fe, Co and Mn based on kinetic and competition experiments, stoichiometric reactions, isolation of intermediates and theoretical calculations.

Catalytic Applications of Vanadium: A Mechanistic Perspective

The chemistry of vanadium has seen remarkable activity in the past 50 years. In the present review, reactions catalyzed by homogeneous and supported vanadium complexes from 2008 to 2018 are summarized and discussed. Particular attention is given to mechanistic and kinetics studies of vanadium-catalyzed reactions including oxidations of alkanes, alkenes, arenes, alcohols, aldehydes, ketones, and sulfur species, as well as oxidative C-C and C-O bond cleavage, carbon-carbon bond formation, deoxydehydration, haloperoxidase, cyanation, hydrogenation, dehydrogenation, ring-opening metathesis polymerization, and oxo/imido heterometathesis. Additionally, insights into heterogeneous vanadium catalysis are provided when parallels can be drawn from the homogeneous literature.

Oxidation States, Stability, and Reactivity of Organoferrate Complexes

We have applied a combination of electrospray-ionization mass spectrometry, electrical conductivity measurements, and Mössbauer spectroscopy to identify and characterize the organoferrate species R _nFe _m^- formed upon the transmetalation of iron precursors (Fe(acac)₃, FeCl₃, FeCl₂, Fe(OAc)₂) with Grignard reagents RMgX (R = Me, Et, Bu, Hex, Oct, Dec, Me₃SiCH₂, Bn, Ph, Mes, 3,5-(CF₃)₂-C₆H₃; X = Cl, Br) in tetrahydrofuran. The observed organoferrates show a large variety in their aggregation (1 ≤ m ≤ 8) and oxidation states (I to IV), which are chiefly determined by the nature of their organyl groups R. In numerous cases, the addition of a bidentate amine or phosphine changes the distributions of organoferrates and affects their stability. Besides undergoing efficient intermolecular exchange processes, several of the probed organoferrates react with organyl (pseudo)halides R'X (R' = Et, ⁱPr, Bu, Ph, p-Tol; X = Cl, Br, I, OTf) to afford heteroleptic complexes of the type R₃FeR'^-. Gas-phase fragmentation of most of these complexes results in reductive eliminations of the coupling products RR' (or, alternatively, of R₂). This finding indicates that iron-catalyzed cross-coupling reactions may proceed via such heteroleptic organoferrates R₃FeR'^- as intermediates. Gas-phase fragmentation of other organoferrate complexes leads to β-hydrogen eliminations, the loss of arenes, and the expulsion of organyl radicals. The operation of both one- and two-electron processes is consistent with previous observations and contributes to the formidable complexity of organoiron chemistry.

Iron-Catalyzed Cross-Couplings in the Synthesis of Pharmaceuticals: In Pursuit of Sustainability

The scarcity of precious metals has led to the development of sustainable strategies for metal-catalyzed cross-coupling reactions. The establishment of new catalytic methods using iron is attractive owing to the low cost, abundance, ready availability, and very low toxicity of iron. In the last few years, sustainable methods for iron-catalyzed cross-couplings have entered the critical area of pharmaceutical research. Most notably, iron is one of the very few metals that have been successfully field-tested as highly effective base-metal catalysts in practical, kilogram-scale industrial cross-couplings. In this Minireview, we critically discuss the strategic benefits of using iron catalysts as green and sustainable alternatives to precious metals in cross-coupling applications for the synthesis of pharmaceuticals. The Minireview provides an essential introduction to the fundamental aspects of practical iron catalysis, highlights areas for improvement, and identifies new fields to be explored.

2-Methyltetrahydrofuran: A Green Solvent for Iron-Catalyzed Cross-Coupling Reactions

Iron-catalyzed cross-coupling reactions allow sustainable formation of C-C bonds using cost-effective, earth-abundant base-metal catalysis for complex syntheses of pharmaceuticals, natural products, and fine chemicals. The major challenge to maintain full sustainability of the process is the identification of green and renewable solvents that can be harnessed to replace the conventional solvents for this highly attractive reaction. Herein, iron-catalyzed cross-coupling of aryl chlorides and tosylates with challenging organometallic reagents possessing β-hydrogens is found to proceed in good to excellent yields with the green, sustainable, and eco-friendly 2-methyltetrahydrofuran (2-MeTHF) as solvent. The reaction operates with excellent functional group tolerance under very mild conditions. Furthermore, large-scale cross-coupling, cross-coupling of heteroaromatic substrates, and cross-coupling of challenging aryl tosylates and carbamates mediated by Fe-N-heterocyclic carbene catalytic systems in eco-friendly 2-MeTHF were also carried out. The developed method was applied to the key cross-coupling in the synthesis of a fibrinolysis inhibitor, further highlighting the potential of 2-MeTHF as a general solvent for sustainable iron-catalyzed cross-coupling reactions.

Iron-Catalyzed Difluoromethylation of Arylzincs with Difluoromethyl 2-Pyridyl Sulfone

We report the first iron-catalyzed difluoromethylation of arylzincs with difluoromethyl 2-pyridyl sulfone via selective C-S bond cleavage. This method employs the readily available, bench-stable fluoroalkyl sulfone reagent and inexpensive iron catalyst, allowing facile access to structurally diverse difluoromethylated arenes at low temperatures. The experiment employing a radical clock indicates the involvement of radical species in this iron-catalyzed difluoromethylation process.

Acid-promoted iron-catalysed dehydrogenative [4 + 2] cycloaddition for the synthesis of quinolines under air

An acid-promoted iron-catalysed dehydrogenative [4 + 2] cycloaddition reaction was developed for the synthesis of quinolines using air as a terminal oxidant. Various quinoline derivatives were obtained, and no other byproducts besides water.

Iron-Catalyzed C-O Bond Activation: Opportunity for Sustainable Catalysis

Oxygen-based electrophiles have emerged as some of the most valuable cross-coupling partners in organic synthesis due to several major strategic and environmental benefits, such as abundance and potential to avoid toxic halide waste. In this context, iron-catalyzed C-O activation/cross-coupling holds particular promise to achieve sustainable catalytic protocols due to its natural abundance, inherent low toxicity, and excellent economic and ecological profile. Recently, tremendous progress has been achieved in the development of new methods for functional-group-tolerant iron-catalyzed cross-coupling reactions by selective C-O cleavage. These methods establish highly attractive alternatives to traditional cross-coupling reactions by using halides as electrophilic partners. In particular, new easily accessible oxygen-based electrophiles have emerged as substrates in iron-catalyzed cross-coupling reactions, which significantly broaden the scope of this catalysis platform. New mechanistic manifolds involving iron catalysis have been established; thus opening up vistas for the development of a wide range of unprecedented reactions. The synthetic potential of this sustainable mode of reactivity has been highlighted by the development of new strategies in the construction of complex motifs, including in target synthesis. The most recent advances in sustainable iron-catalyzed cross-coupling of C-O-based electrophiles are reviewed, with a focus on both mechanistic aspects and synthetic utility. It should be noted that this catalytic manifold provides access to motifs that are often not easily available by other methods, such as the assembly of stereodefined dienes or C(sp² )-C(sp³ ) cross-couplings, thus emphasizing the synthetic importance of this mode of reactivity.

Iron-Catalyzed C-H Bond Activation

Catalytic C-H bond activation, which was an elusive subject of chemical research until the 1990s, has now become a standard synthetic method for the formation of new C-C and C-heteroatom bonds. The synthetic potential of C-H activation was first described for ruthenium catalysis and is now widely exploited by the use of various precious metals. Driven by the increasing interest in chemical utilization of ubiquitous metals that are abundant and nontoxic, iron catalysis has become a rapidly growing area of research, and iron-catalyzed C-H activation has been most actively explored in recent years. In this review, we summarize the development of stoichiometric C-H activation, which has a long history, and catalytic C-H functionalization, which emerged about 10 years ago. We focus in this review on reactions that take place via reactive organoiron intermediates, and we excluded those that use iron as a Lewis acid or radical initiator. The contents of this review are categorized by the type of C-H bond cleaved and the type of bond formed thereafter, and it covers the reactions of simple substrates and substrates possessing a directing group that anchors the catalyst to the substrate, providing an overview of iron-mediated and iron-catalyzed C-H activation reported in the literature by October 2016.

Two-state reactivity in C–H activation by a four-coordinate iron(0) complex

The ground state structure of [Ph₂B(^tBuIm)₂Fe(CO)₂]⁻ is trigonal pyramidal (S = 1), with a thermally accessible square planar (S = 0) geometry.

Synthesis of 2-arylthio arylcyanamides from 2-iodoaryl isothiocyanates via a one-pot three-component reaction

Consecutive addition/domino C–S cross-coupling reaction has been developed for the synthesis of 2-arylthio arylcyanamides.

Cobalt-Catalyzed Reductive Cross-Coupling Between Styryl and Benzyl Halides

A simple and efficient protocol for the direct reductive cross-coupling between alkenyl and benzyl halides using a Co/Mn system has been developed. This reaction proceeds smoothly in the presence of [CoBr₂ (PPh₃ )₂ ] as the catalyst, with NaI as an additive in acetonitrile with a broad scope of functionalized alkenyl and benzyl halides. Different functional groups are tolerated on both coupling partners, thus, significantly extending the general scope of transition-metal-catalyzed benzylation of alkenyl halides. Moderate to excellent yields were also obtained. From a mechanistic point of view, a radical chain mechanism was proposed. This reaction is stereospecific and some studies suggest the retention of the double-bond configuration.

Radicals: Reactive Intermediates with Translational Potential

This Perspective illustrates the defining characteristics of free radical chemistry, beginning with its rich and storied history. Studies from our laboratory are discussed along with recent developments emanating from others in this burgeoning area. The practicality and chemoselectivity of radical reactions enable rapid access to molecules of relevance to drug discovery, agrochemistry, material science, and other disciplines. Thus, these reactive intermediates possess inherent translational potential, as they can be widely used to expedite scientific endeavors for the betterment of humankind.

Redox-Active Esters in Fe-Catalyzed C-C Coupling

Cross-couplings of alkyl halides and organometallic species based on single electron transfer using Ni and Fe catalyst systems have been studied extensively, and separately, for decades. Here we demonstrate the first couplings of redox-active esters (both isolated and derived in situ from carboxylic acids) with organozinc and organomagnesium species using an Fe-based catalyst system originally developed for alkyl halides. This work is placed in context by showing a direct comparison with a Ni catalyst for >40 examples spanning a range of primary, secondary, and tertiary substrates. This new C–C coupling is scalable and sustainable, and it exhibits a number of clear advantages in several cases over its Ni-based counterpart.

Isolation, Characterization, and Reactivity of Fe8Me12(-): Kochi's S = 1/2 Species in Iron-Catalyzed Cross-Couplings with MeMgBr and Ferric Salts

Iron-catalyzed cross-couplings with simple ferric salts have been known since the 1970s, pioneered by Kochi for cross-coupling using alkylmagnesium nucleophiles including MeMgBr. While Kochi observed the formation of a S = 1/2 iron species in reactions of simple ferric salts with MeMgBr proposed to be an iron(I) species, the identity of this species has remained undefined for nearly 40 years. Herein, we report the isolation and characterization of [MgCl(THF)5][Fe8Me12], which combined with EPR and MCD studies is shown to be consistent with Kochi's S = 1/2 species. Reaction studies with β-bromostyrene demonstrate that this species alone displays minimal reactivity but, when combined with additional MeMgBr, leads to rapid and selective formation of cross-coupled product.

Silver comes into play: Henry reaction and domino cycloisomerisation sequence catalysed by [Ag(i)(Pc-L)] complexes

The Ag(i) complexes of pyridine-containing ligands with an active pendant arm are new catalysts for an old reaction: the nitroaldol condensation. When the substrates are 2-alkynylarylaldehydes, a smart cascade cycloisomerisation process can occur.

Iron complexes of a bidentate picolyl-NHC ligand: synthesis, structure and reactivity

Reversible deprotonation–reprotonation of a bidentate picolyl-NHC ligand on Fe(ii).