Enhanced Activity and Stability of Carbon-Decorated Cuprous Oxide Mesoporous Nanorods for CO2 Reduction in Artificial Photosynthesis

Improving Artificial Photosynthesis over Carbon Nitride by Gas-Liquid-Solid Interface Management for Full Light-Induced CO2 Reduction to C1 and C2 Fuels and O2

The activity and selectivity of simple photocatalysts for CO2 reduction remain limited by the insufficient photophysics of the catalysts, as well as the low solubility and slow mass transport of gas molecules in/through aqueous solution. In this study, these limitations are overcome by constructing a triphasic photocatalytic system, in which polymeric carbon nitride (CN) is immobilized onto a hydrophobic substrate, and the photocatalytic reduction reaction occurs at a gas-liquid-solid (CO2 -water-catalyst) triple interface. CN anchored onto the surface of a hydrophobic substrate exhibits an approximately 7.2-fold enhancement in total CO2 conversion, with a rate of 415.50 μmol m-2  h-1 under simulated solar light irradiation. This value corresponds to an overall photosynthetic efficiency for full water-CO2 conversion of 0.33 %, which is very close to biological systems. A remarkable enhancement of direct C2 hydrocarbon production and a high CO2 conversion selectivity of 97.7 % are observed. Going from water oxidation to phosphate oxidation, the quantum yield is increased to 1.28 %.

Boosting C2 products in electrochemical CO2 reduction over highly dense copper nanoplates

Exclusive C2 selectivity of Cu-Nplates over C1 during electrocatalytic CO₂ reduction offers opportunities for large scale, long-term renewable energy storage and lessens carbon emissions.

Pushing the activity of CO2 electroreduction by system engineering

As a promising technology that may solve global environmental challenges and enable intermittent renewable energy storage as well as zero-carbon-emission energy cycling, the carbon dioxide reduction reaction has been extensively studied in the past several years. Beyond the fruitful progresses and innovations in catalysts, the system engineering-based research on the full carbon dioxide reduction reaction is urgently needed toward the industrial application. In this review, we summarize and discuss recent works on the innovations in the reactor architectures and optimizations based on system engineering in carbon dioxide reduction reaction. Some challenges and future trends in this field are further discussed, especially on the system engineering factors.

g-C3N4-Mediated Synthesis of Cu2O To Obtain Porous Composites with Improved Visible Light Photocatalytic Degradation of Organic Dyes

A highly porous architecture of graphitic carbon nitride g-C3N4/Cu2O nanocomposite in the form of cubes with a side length of ≈ 1 μm, large pores of 1.5 nm, and a high surface area of 9.12 m2/g was realized by an optimized in situ synthesis protocol. The synthesis protocol involves dispersing a suitable "Cu" precursor into a highly exfoliated g-C3N4 suspension and initiating the reaction for the formation of Cu2O. Systematic optimization of the conditions and compositions resulted in a highly crystalline g-C3N4/Cu2O composite. In the absence of g-C3N4, the Cu2O particles assemble into cubes with a size of around 300 nm and are devoid of pores. Detailed structural and morphological evaluations by powder X-ray diffraction and field emission scanning electron microscopy revealed the presence of highly exfoliated g-C3N4, which is responsible for the formation of the porous architecture in the cube like assembly of the composite. The micrographs clearly reveal the porous structure of the composite that retains the cubic shape of Cu2O, and the energy-dispersive spectroscopy supports the presence of g-C3N4 within the cubic morphology. Among the different g-C3N4/Cu2O compositions, CN/Cu-5 with 10% of g-C3N4, which is also the optimum composition resulting in a porous cubic morphology, shows the best visible light photocatalytic performance. This has been supported by the ultraviolet diffuse reflectance spectroscopy (UV-DRS) studies of the composite which shows a band gap of around 2.05 eV. The improved photocatalytic performance of the composite could be attributed to the highly porous morphology along with the suitable optical band gap in the visible region of the solar spectrum. The optimized composite, CN/Cu-5, demonstrates a visible light degradation of 81% for Methylene Blue (MB) and 85.3% for Rhodamine-B (RhB) in 120 min. The decrease in the catalyst performance even after three repeated cycles is less than 5% for both MB and RhB dyes. The rate constant for MB and RhB degradation is six and eight times higher with CN/Cu-5 when compared with the pure Cu2O catalyst. To validate our claim that the dye degradation is not merely decolorization, liquid chromatography-mass spectroscopy studies were carried out, and the end products of the degraded dyes were identified.

Atomically thin two-dimensional ZnSe/ZnSe(ea)x van der Waals nanojunctions for synergistically enhanced visible light photocatalytic H2 evolution

Two-dimensional (2D) photocatalysts have been widely studied due to their short charge carrier migration pathways and tunable electronic structures. Herein, a facile one-pot solvothermal process with ethylamine (ea) constructs a novel 2D nanojunction based on ZnSe. The ea molecules coordinate with Zn2+ to form 2D ZnSe(ea)x, where the consequent 2D ZnSe grows in an epitaxial way resulting in the self-assembled 2D/2D ZnSe/ZnSe(ea)x nanojunctions driven by van der Waals (VDW) force, which largely extend the absorption range. The atomic thickness of the 2D structure offers a short charge migration pathway, low electric resistance and rich active sites for the surface reaction of photocatalysis. All the above favorable factors work synergistically to reach a superior hydrogen evolution of 2875 μmol g-1 h-1 under visible light irradiation (≥420 nm) and a notable quantum yield of 64.5% at 450 nm, which are among the highest recorded values of non-noble metal photocatalysts.

Restructuring of Cu2O to Cu2O@Cu-Metal-Organic Frameworks for Selective Electrochemical Reduction of CO2

Electrochemical reduction of carbon dioxide to hydrocarbons, driven by renewable power sources, is a fascinating and clean way to remedy greenhouse gas emission as a result of overdependence on fossil fuels and produce value-added fine chemicals. The Cu-based catalysts feature unique superiorities; nevertheless, achieving high hydrocarbon selectivity is still inhibited and remains a great challenge. In this study, we report on a tailor-made multifunction-coupled Cu-metal-organic framework (Cu-MOF) electrocatalyst by time-resolved controllable restructuration from Cu₂O to Cu₂O@Cu-MOF. The restructured electrocatalyst features a time-responsive behavior and is equipped with high specific surface area for strong adsorption capacity of CO₂ and abundant active sites for high electrocatalysis activity based on the as-produced MOF on the surface of Cu₂O, as well as the accelerated charge transfer derived from the Cu₂O core in comparison with the Cu-MOF. These intriguing characteristics finally lead to a prominent performance towards hydrocarbons, with a high hydrocarbon Faradaic efficiency (FE) of 79.4%, particularly, the CH₄ FE as high as 63.2% (at -1.71 V). This work presents a novel and efficient strategy to configure MOF-based materials in energy and catalysis fields, with a focus on big surface area, high adsorption ability, and much more exposed active sites.

High-performance TiO2 photocatalyst produced by the versatile functions of the tiny bimetallic MOF-derived NiCoS-porous carbon cocatalyst

Bimetallic zeolitic imidazolate framework (NiCo-ZIF)-templated NiCoS-porous carbon (PC) at only 0.2 at% exhibited versatile effects on the morphology as well as the photocatalytic hydrogen performance of TiO₂ nanocrystals.

In Situ-Fabricated 2D/2D Heterojunctions of Ultrathin SiC/Reduced Graphene Oxide Nanosheets for Efficient CO2 Photoreduction with High CH4 Selectivity

Photoreduction of CO₂ into fuel molecules such as CH₄ represents a promising route to simultaneously explore renewable energy and alleviate global warming. However, the implementation of such a process is hampered by low product yields and poor selectivity. A 2D/2D heterojunction of ultrathin SiC and reduced graphene oxide (RGO) nanosheets was fabricated in situ for efficient and selective photoreduction of CO₂ . Ultrathin SiC suppresses significant charge recombination in the bulk phase, thus providing more energetic electrons. The robust 2D/2D heterojunction allows fast transfer of energetic electrons from SiC to RGO. Combining the vital role of RGO in facilitating CO₂ activation, the optimized SiC/RGO exhibits an electron-transfer rate of 58.17 μmol h^-1  g^-1 towards CO₂ reduction, 2.7 times that of pure SiC (20.25 μmol h^-1  g^-1 ). About 92 % of the transferred electrons from SiC are devoted to generating CH₄ (6.72 μmol h^-1  g^-1 ). Such high efficiency and selectivity are mainly a result of the densely accumulated energetic electrons within RGO, which facilitate the eight-electron process to produce CH₄ . This work will inspire the design of catalyst/cocatalyst systems for efficient and selective photoreduction of CO₂ .

Visible-Light-Driven Conversion of CO2 to CH4 with an Organic Sensitizer and an Iron Porphyrin Catalyst

Using a phenoxazine-based organic photosensitizer and an iron porphyrin molecular catalyst, we demonstrated photochemical reduction of CO₂ to CO and CH₄ with turnover numbers (TONs) of 149 and 29, respectively, under visible-light irradiation (λ > 435 nm) with a tertiary amine as sacrificial electron donor. This work is the first example of a molecular system using an earth-abundant metal catalyst and an organic dye to effect complete 8e^-/8H⁺ reduction of CO₂ to CH₄, as opposed to typical 2e^-/2H⁺ products of CO or formic acid. The catalytic system continuously produced methane even after prolonged irradiation up to 4 days. Using CO as the feedstock, the same reactive system was able to produce CH₄ with 85% selectivity, 80 TON and a quantum yield of 0.47%. The redox properties of the organic photosensitizer and acidity of the proton source were shown to play a key role in driving the 8e^-/8H⁺ processes.

Unveiling the Role of Defects on Oxygen Activation and Photodegradation of Organic Pollutants

The status of defects of TiO₂ are of fundamental importance in determining its physicochemical properties. Here we report a simple chemical deposition method for controllable synthesis of defective anatase TiO₂ nanocrystals under various calcination atmospheres. XPS and ESR analysis reveals that both the oxygen vacancies ( V_O) and the trivalent titanium (Ti³⁺) defects exist in TiO₂ after N₂ treatment (N-TiO₂). Meanwhile, mainly V_O defects can be obtained in TiO₂ with air calcination (A-TiO₂). ESR spectra for reactive oxygen species determination, clearly show that the visible light catalytic activity is mainly caused by the efficient activation of oxygen molecules to •O^2- species for A-TiO₂, which play an important role in hindering the accumulation of intermediates during p-chlorophenol (4-CP) photodegradation process. However, the oxygen molecules cannot be activated for N-TiO₂ even with superior visible light absorption and thus the photogenerated electron are reductant, which participated in the transformation of BQ to HQ via electron shuttle mechanism. Moreover, A-TiO₂ exhibits higher separation efficiency of photogenerated carriers than that of N-TiO₂, showing the critical role of V_O with a suitable concentration in transferring photogenerated charges.

Controlled Construction of Cu(I) Sites within Confined Spaces via Host-Guest Redox: Highly Efficient Adsorbents for Selective CO Adsorption

Here, we designed a double-solvent/host-guest redox combined strategy to construct Cu⁺ sites in metal-organic frameworks (MOFs) for the first time. As a proof of concept, a representative MOF MIL-100(Fe) with tunable valence states of cations was employed as the host. The combined strategy realizes selective introduction of Cu²⁺ precursors to the interior pores of MIL-100(Fe), remarkably minimizing the aggregation of Cu²⁺ and subsequently formed Cu⁺ species. Owing to the proper reducibility of in situ formed Fe²⁺ in the frameworks, controlled conversation of Cu²⁺ to Cu⁺ with ∼100% yield is achieved in the absence of any additional reducing agents. These characteristics make the obtained materials Cu⁺-modified MIL-100(Fe) highly active in selective CO adsorption. The CO adsorption capacity is up to 3.75 mmol·g^-1 at 298 K and 1 bar, which is superior to all other Cu⁺-containing adsorbents reported so far such as CuCl/activated carbon (2.5 mmol·g^-1), CuCl/γ-Al₂O₃ (1.0 mmol·g^-1), and CuCl/SBA-15 (0.50 mmol·g^-1). The same adsorbent also exhibits quite high selectivity of CO over N₂, and the ideal adsorption solution theory selectivity reaches 424. The outstanding CO adsorption performance make the present adsorbents great potential in separation of CO from various mixtures.

Sustainable Recovery of CO2 by Using Visible-Light-Responsive Crystal Cuprous Oxide/Reduced Graphene Oxide

A simple solution-chemistry method has been investigated to prepare crystal cuprous oxide (Cu2O) incorporated with reduced graphene oxide (designated as Cu2O-rGO-x, where x represents the contents of rGO = 1%, 5% and 10%) in this work. These Cu2O-rGO-x composites combine the prospective advantages of rhombic dodecahedra Cu2O together with rGO nanosheets which have been studied as visible-light-sensitive catalysts for the photocatalytic production of methanol from CO2. Among the Cu2O-rGO-x photocatalysts, the methanol yield photocatalyzed by Cu2O-rGO-5% can be observed to be 355.26 μmol g−1cat, which is ca. 36 times higher than that of pristine Cu2O nanocrystal in the 20th hour under visible light irradiation. The improved activity may be attributed to the enhanced absorption ability of visible light, the superior separation of electron–hole pairs, well-dispersed Cu2O nanocrystals and the increased photostability of Cu2O, which are evidenced by employing UV-vis diffuse reflection spectroscopy, photoluminescence, scanning electron microscopy/transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. This work demonstrates an easy and cost-effective route to prepare non-noble photocatalysts for efficient CO2 recovery in artificial photosynthesis.

Emerging Applications of Plasmons in Driving CO2 Reduction and N2 Fixation

The photochemical production of fuels using sunlight is an innovative way for meeting the quickly increasing energy demands. One of the largest challenges is to develop high-performance photocatalysts that can meet the requirements of practical applications. Owing to their intriguing localized surface plasmon resonances, noble metal nanoparticles and nanostructures show a great potential for enhancing the photocatalytic efficiency and thereby have attracted rapidly growing interest recently. Here, for the first time, the latest achievements in the utilization of plasmons in driving CO₂ reduction and N₂ fixation into high-value products are comprehensively described. The involved plasmonic enhancement mechanisms in the two types of reactions are fully illustrated. A particular emphasis is given to the outlook on the direction and prospects for future work in this topic.

Mechanisms of catalytic reduction of CO2 with heme and nonheme metal complexes

The catalytic conversion of CO2 into valuable chemicals and fuels has attracted increasing attention, providing a promising route for mitigating the greenhouse effect of CO2 and also meeting the global energy demand. Among many homogeneous and heterogeneous catalysts for CO2 reduction, this mini-review is focused on heme and nonheme metal complexes that act as effective catalysts for the electrocatalytic and photocatalytic reduction of CO2. Because metalloporphyrinoids show strong absorption in the visible region, which is sensitive to the oxidation states of the metals and ligands, they are suited for the detection of reactive intermediates in the catalytic CO2 reduction cycle by electronic absorption spectroscopy. The first part of this review deals with the catalytic mechanism for the one-electron reduction of CO2 to oxalic acid with heme and nonheme metal complexes, with an emphasis on how the formation of highly energetic CO2˙ is avoided. Then, the catalytic mechanism of two-electron reduction of CO2 to produce CO and H2O is compared with that to produce HCOOH. The effect of metals and ligands of the heme and nonheme complexes on the CO or HCOOH product selectivity is also discussed. The catalytic mechanisms of multi-electron reduction of CO2 to methanol (six-electron reduced product) and methane (eight-electron reduced product) are also discussed for both electrocatalytic and photocatalytic systems.

Facet-Dependent Cuprous Oxide Nanocrystals Decorated with Graphene as Durable Photocatalysts under Visible Light

Three morphologies (octahedral, hierarchical and rhombic dodecahedral) of crystal Cu₂O with different facets ({111}, {111}/{110}, and {110}) incorporating graphene sheets (denoted as o-Cu₂O-G, h-Cu₂O-G and r-Cu₂O-G, respectively) have been fabricated by using simple solution-phase techniques. Among these photocatalysts, the r-Cu₂O-G possesses the best photocatalytic performance of 98% removal efficiency of methyl orange (MO) with outstanding kinetics for 120 min of visible light irradiation. This enhancement is mainly due to the dangling “Cu” atoms in the highly active {110} facets, resulting in the increased adsorption of negatively charged MO. More importantly, the unique interfacial structures of Cu₂O rhombic dodecahedra connected to graphene nanosheets can not only decrease the recombination of electron-hole pairs but also stabilize the crystal structure of Cu₂O, as verified by a series of spectroscopic analyses (e.g., X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM)). The effective photocatalysts developed in this work could be applied to the efficient decolorization of negatively charged organic dyes by employing solar energy.

Necessary and sufficient conditions for the successful three-phase photocatalytic reduction of CO2 by H2O over heterogeneous photocatalysts

Artificial photosynthesis has recently drawn an increasing amount of attention due to the fact that it allows for direct solar-to-chemical energy conversion. However, one of the basic steps of this process, namely the reduction of CO2 by H2O to afford O2 and CO2 reduction products (CO2RPs) such as HCOOH, CO, HCHO, CH3OH, and CH4, is very difficult to achieve. In contrast to the CO2 reduction in plants and homogenous systems, the reduction of CO2 to CO2RPs over heterogeneous photocatalysts was challenged by the competing reduction of H+ to H2. Unfortunately, most of the research performed so far has focused only on the reduction of CO2, rather than the characterization of the H2O oxidation and H2 production. Moreover, the fact that the heterogeneous photocatalytic reduction of CO2 into CO2RPs by H2O should satisfy several selectivity criteria has often been ignored. Herein, we propose three such evaluation criteria, namely (1) the origin of carbon in CO2RPs (determined using isotopically labeled CO2 (13CO2)), (2) the relative amount of H2 and CO2RPs produced, and (3) the amount of O2 produced by the oxidation of H2O. If all these criteria are satisfied, i.e., the carbons of CO2RPs originate from CO2, the amount of H2 produced is negligible, and a stoichiometric amount of O2 is produced by the oxidation of H2O, then CO2 introduced into the gas phase is believed to be reduced by H2O to CO2RPs in the aqueous phase.

Dye-Assisted Transformation of Cu2O Nanocrystals to Amorphous Cu x O Nanoflakes for Enhanced Photocatalytic Performance

Amorphous Cu _x O nanoflakes with a thickness of 10-50 nm were synthesized through dye-assisted transformation of rhombic dodecahedral Cu₂O nanocrystals using a facile solution process. The morphology evolution observed by electron microscopy is highly dependent on the reaction between the surface and the dye. The crystal grain shrinks during the process until the formation of a purely amorphous nanoflake. The amorphous Cu _x O nanoflake consists of a combination of Cu(I) and Cu(II) with a ratio close to 1:1. It shows enhanced photocatalytic reactivity toward the degradation of methyl orange compared to that of rhombic dodecahedral Cu₂O nanocrystals with all active (110):Cu facets. The chemical composition and architecture remain the same after repeating degradation tests. The high surface-to-volume ratio contributes to its superior photocatalytic performance, whereas its low surface energy, confirmed by density functional theory simulations, explains its improved stability. The nanoflakes also show the ability of degrading nitrobenzene effectively, thus demonstrating great promise as a highly stable and active photocatalyst for environmental applications.

Copper nanoparticle interspersed MoS2 nanoflowers with enhanced efficiency for CO2 electrochemical reduction to fuel

Electrocatalytic conversion of carbon dioxide (CO₂) has been considered as an ideal method to simultaneously solve the energy crisis and environmental issue around the world. In this work, ultrasmall Cu nanoparticle interspersed flower-like MoS₂ was successfully fabricated via a facile microwave hydrothermal method. The designed optimal hierarchical Cu/MoS₂ composite not only exhibited remarkably enhanced electronic conductivity and specific surface area but also possessed improved CO₂ adsorption capacity, resulting in a significant increase in overall faradaic efficiency and a 7-fold augmentation of the faradaic efficiency of CH₄ in comparison with bare MoS₂. In addition, the Cu/MoS₂ composite had superior stability with high efficiency retained for 48 h in the electrochemical process. It is anticipated that the designed Cu/MoS₂ composite electrocatalyst may provide new insights for transition metal sulfides and non-noble particles applied to CO₂ reduction.

Coupling photocatalytic CO2 reduction with benzyl alcohol oxidation to produce benzyl acetate over Cu2O/Cu

A successful coupling of photocatalytic CO₂ reduction with benzyl alcohol oxidation to produce benzyl acetate over a Cu₂O/Cu nanocomposite.

Development of Plasmonic Cu2O/Cu Composite Arrays as Visible- and Near-Infrared-Light-Driven Plasmonic Photocatalysts

We describe efficient visible- and near-infrared (vis/NIR) light-driven photocatalytic properties of hybrids of Cu₂O and plasmonic Cu arrays. The Cu₂O/Cu arrays were prepared simply by allowing a Cu half-shell array to stand in an oxygen atmosphere for 3 h, which was prepared by depositing Cu on two-dimensional colloidal crystals with a diameter of 543 or 224 nm. The localized surface plasmon resonances (LSPRs) of the arrays were strongly excited at 866 and 626 nm, respectively, at which the imaginary part of the dielectric function of Cu is small. The rate of photodegradation of methyl orange was 27 and 84 times faster, respectively, than that with a Cu₂O/nonplasmonic Cu plate. The photocatalytic activity was demonstrated to be dominated by Cu LSPR excitation. These results showed that the inexpensive Cu₂O/Cu arrays can be excellent vis/NIR-light-driven photocatalysts based on the efficient excitation of Cu LSPR.

Enhanced Photoelectrochemical Performance of Cuprous Oxide/Graphene Nanohybrids

Combination of an oxide semiconductor with a highly conductive nanocarbon framework (such as graphene or carbon nanotubes) is an attractive avenue to assemble efficient photoelectrodes for solar fuel generation. To fully exploit the possible synergies of the hybrid formation, however, precise knowledge of these systems is required to allow rational design and morphological engineering. In this paper, we present the controlled electrochemical deposition of nanocrystalline p-Cu2O on the surface of different graphene substrates. The developed synthetic protocol allowed tuning of the morphological features of the hybrids as deduced from electron microscopy. (Photo)electrochemical measurements (including photovoltammetry, electrochemical impedance spectroscopy, photocurrent transient analysis) demonstrated better performance for the 2D graphene containing photoelectrodes, compared to the bare Cu2O films, the enhanced performance being rooted in suppressed charge carrier recombination. To elucidate the precise role of graphene, comparative studies were performed with carbon nanotube (CNT) films and 3D graphene foams. These studies revealed, after allowing for the effect of increased surface area, that the 3D graphene substrate outperformed the other two nanocarbons. Its interconnected structure facilitated effective charge separation and transport, leading to better harvesting of the generated photoelectrons. These hybrid assemblies are shown to be potentially attractive candidates in photoelectrochemical energy conversion schemes, namely CO2 reduction.

Dimensional heterostructures of 1D CdS/2D ZnIn2S4 composited with 2D graphene: designed synthesis and superior photocatalytic performance

Multidimensional heterostructure of 1D/2D CdS/ZnIn₂S₄ with 2D RGO are successfully synthesized, which exhibit superior photoactivity and good stability for the degradation of organic dyes.