A turn-on fluorescent sensor for pyrophosphate based on the disassembly of Cu2+-mediated perylene diimide aggregates

Targetable N-annulated perylene-based colorimetric and ratiometric near-infrared fluorescent probes for the selective detection of hydrogen sulfide in mitochondria, lysosomes, and serum

The N-annulated perylene-based ratiometric NIR fluorescent probes were firstly developed to detect H₂S in mitochondria, lysosomes, and serum.

A new fluorescent sensor containing glutamic acid for Fe3+ and its resulting complex as a secondary sensor for PPi in purely aqueous solution

A new fluorescence sensor L with benzimidazo[2,1-α]benz[de]isoquinoline-7-one as the fluorophore and glutamic acid moiety as the receptor was synthesized and characterized.

Colorimetric Logic Gate for Pyrophosphate and Pyrophosphatase via Regulating the Catalytic Capability of Horseradish Peroxidase

By regulating the catalytic capability of horseradish peroxidase (HRP), an artful colorimetric assay platform for pyrophosphate (PPi) and pyrophosphatase (PPase) was unprecedentedly designed. In this work, Cu(I), generated by reducing Cu(II) in the presence of ascorbate, could inhibit HRP's catalytic capability of transforming colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxidized TMB (oxTMB). The robust coordination between PPi and Cu(II) is able to discourage the reduction of Cu(II) to Cu(I) effectively, thus restoring the original catalytic capability of HRP and regenerating blue-colored oxTMB. Upon PPase introduction, PPi would be hydrolyzed into orthophosphate, which could release Cu(II) free from the Cu(II)-PPi complex, and thus in turn allows the catalytic capability of HRP to be inhibited by Cu(I). HRP was activated or deactivated to different degrees depending on PPi or PPase levels, which could be indicated by using HRP-triggered catalytic system as a signal amplifier, thus paving a way for PPi and PPase sensing. Based on the colorimetric sensor for PPi and PPase, an "INH" logic gate was rationally constructed. With the merits of high sensitivity and selectivity, cost-effectiveness, and simplification, our proposed analytical system has also been verified to have potential to be utilized for enzyme inhibitor screening and diagnosis of PPase-related diseases.

Pyrophosphate Sensor Based on Principal Component Analysis of Conjugated Polyelectrolyte Fluorescence

The pyrophosphate anion (PPi) plays an important role in biochemical processes. Therefore, a simple but reliable analytical technique is essential for selective detection of PPi in biochemical systems. Here, we present a principal component analysis (PCA) method for analytical determination of PPi concentration using a fluorescent conjugated polyelectrolyte (CPE) combined with a polyamine modifier. The CPE has anionic side chains and dissolves molecularly in water, as indicated by its structured fluorescence emission spectrum. However, addition of tris(3-aminoethyl)amine (tetraamine or N4) quenches the CPE fluorescence emission. Tetraamine, which is a polycation at neutral pH, binds multiple anionic CPE chains, leading to aggregate formation, resulting in aggregation-induced fluorescence quenching. Addition of PPi to the polymer-amine aggregate reverses the process, resulting in fluorescence recovery. The relatively higher concentration of PPi compared to that of the polymer allows it to effectively compete to bind the amine, thus releasing molecularly dissolved polymer chains. Fluorescence correlation spectroscopy of the P1/N4 complex and of P1/N4/PPi confirms the change in size of the CPE aggregates that occurs upon reversible aggregation. Application of PCA to the fluorescence emission data set of standard samples yields two principal components, which are used to create a predictive model for PPi analysis. The PCA method is able to directly determine the concentration of PPi with approximately 95% accuracy within the concentration range from 100 μM to 3 mM, without the need for a reference state as is typically needed for ratiometric fluorescence assays.

Benzimidazolium-Based Self-Assembled Fluorescent Aggregates for Sensing and Catalytic Degradation of Diethylchlorophosphate

The unregulated use of chemical weapons has aroused researchers to develop sensors for chemical warfare agents (CWA) and likewise to abolish their harmful effects, the degradation through catalysis has great advantage. Chemically, the CWAs are versatile; however, mostly they contain organophosphates that act on inhibition of acetyl cholinesterase. In this work, we have designed and synthesized some novel benzimidazolium based fluorescent cations and their fluorescent aggregates were fabricated using anionic surfactants (SDS and SDBS) in aqueous medium. The prepared fluorescent aggregates have shown aggregation induced emission enhancement, which was further used as detection of chemical warfare agent in aqueous medium. The aggregates (Benz-2/SDBS and Benz-3/SDBS) have shown significant changes in emission profile upon interaction with diethylchlorophosphate. Contrarily, the pure dipodal receptor Benz-4 has not shown any response in emission after interaction with organophosphate, and consequently, it was concluded that benzimidazolium cation plays a decisive role in sensing. The mechanism of sensing was fully validated using ³¹P NMR spectroscopy as well as GC-MS, which highlights the transformation of diethylchlorophosphate into diethylhydrogen phosphate. The aggregates selectively interact with diethylchlorophosphate over other biological important phosphates.

Construction of a Turn Off-On-Off Fluorescent System Based on Competitive Coordination of Cu2+ between 6,7-Dihydroxycoumarin and Pyrophosphate Ion for Sensitive Assay of Pyrophosphatase Activity

The detection of pyrophosphatase (PPase) activity is of great significance in diagnosing diseases and understanding the function of PPase-related biological events. This study constructed a turn off-on-off fluorescent system for PPase activity assay based on PPase-regulated competitive coordination of Cu²⁺ between a water-soluble fluorescent probe 6,7-dihydroxycoumarin (DHC) and pyrophosphate (PPi). The probe DHC can coordinate with Cu²⁺ and consequently display on-off type fluorescence response. Furthermore, the in situ formed nonfluorescent Cu²⁺-DHC complex can act as an effective off-on type fluorescent probe for sensing PPi due to the higher coordination reactivity between Cu²⁺ and PPi than that between Cu²⁺ and DHC. The subsequent addition of PPase to the mixture containing Cu²⁺, DHC, and PPi leads to the fluorescence requenching of the system again (an off state) because PPase catalyzes the hydrolysis of PPi into orthophosphate in the reaction system. Under the optimum conditions, the decrease of the fluorescence intensity of DHC-Cu²⁺-PPi system was linear with the increase of the PPase activity in the range from 0.1 to 0.3 U. The detection limit was down to 0.028 U PPase (S/N = 3). Moreover, the as-established system was also applied to evaluate PPase inhibitor. This study offers a simple yet effective method for the detection of PPase activity.

A self-assembled lysinated perylene diimide film as a multifunctional material for neural interfacing

We report the design, synthesis and structure-property investigation of a new perylene diimide material (PDI-Lys) bearing lysine end substituents. Water processed films of PDI-Lys were prepared and their self-assembly, morphology and electrical properties in both inert and air environments were theoretically and experimentally investigated. With the aim of evaluating the potential of PDI-Lys as a biocompatible and functional neural interface for organic bioelectronic applications, its electrochemical impedance as well as the adhesion and viability properties of primary neurons on the PDI-Lys films were studied. By combining theoretical calculations and electrical measurements we show that due to conversion between neutral and zwitterionic anions, the PDI-Lys film conductivity increased significantly upon passing from air to an inert atmosphere, reaching a maximum value of 6.3 S m^-1. We also show that the PDI-Lys film allows neural cell adhesion and neuron differentiation and decreases up to 5 times the electrode/solution impedance in comparison to a naked gold electrode. The present study introduces an innovative, water processable conductive film usable in organic electronics and as a putative neural interface.

1,8-naphthalimide modified [12]aneN₃ compounds as selective and sensitive probes for Cu²⁺ ions and ATP in aqueous solution and living cells

A new fluorescent probe 1 featuring one 1,8-naphthalimide and two [12]aneN3 units was synthesized. In the presence of Cu(2+) ions, the fluorescence emission of 1 was quenched by a factor of 127-fold and no interference by other metal ions was observed under physiological conditions. By means of titration and a Job's plot it was established that 1 forms a complex with Cu(2+) ions in a 1:2 ratio. The fluorescence of the 1-Cu(2+) complex was recovered by the addition of Adenosine-5'-triphosphate (ATP) in aqueous solution. Due to its low cytotoxicity, good water solubility, and high sensitivity, probe 1 was successfully applied in the sequential recognition of Cu(2+) and ATP in aqueous solution and HeLa cells. The highly selective and sensitive ability of 1-Cu(2+) complex to detect ATP even enables its bio-analytical applications in real-time imaging in living cells.

An anionic conjugated polymer as a multi-action sensor for the sensitive detection of Cu(2+) and PPi, real-time ALP assaying and cell imaging

A Cu(2+) ensemble polyfluorene derivative, poly[5,5'-(((9H-fluorene-9,9-diyl)bis(hexane-6,1-diyl))bis(oxy))diisophthalate] sodium salt (PFT), displays unprecedented selectivity for PPi (LOD = 2.26 ppb) in aqueous solution as well as in random urine samples at physiological pH vis-a-vis monitoring ALP activity. Furthermore, intracellular imaging of Cu(2+) and PPi in mouse macrophage (J774A.1) and human breast cancer cells (MDA-MB231) was achieved to confirm the viability of PFT in biological systems.

Supramolecular aggregates as sensory ensembles

Recent research progress in sensing based on induced supramolecular aggregation or disaggregation.

pH-Sensitive perylene tetra-(alkoxycarbonyl) probes for live cell imaging

A novel perylene pH probe for imaging of living cells in neutral to weak basic pH changes.

Optical and photophysical properties of anisole- and cyanobenzene-substituted perylene diimides

Substituent and solvent effects on the one- and two-photon absorption and the photophysical properties of eight bay-substituted perylene-diimides are reported and analyzed.

The donor–acceptor complexes of quantum dots and ionic perylene diimides for ratiometric detection of double-stranded DNA

We developed a FRET ratiometric system based on quantum dots and perylene diimides for detection of double-stranded DNAs.

Self-assembled vesicle and rod-like aggregates of functionalized perylene diimide: reaction-based near-IR intracellular fluorescent probe for selective detection of palladium

Aggregates ofPS-PDIafter Pd⁰based depropargylation show de-aggregation and near-IR, ratiometric absorbance changes in water and live HeLa cells.

Molecular size, shape, and electric charges: essential for perylene bisimide-based DNA intercalator to localize in cell nuclei and inhibit cancer cell growth

The molecular properties concerning size, shape, and electric charges of the planar aromatic DNA intercalators are still poorly understood. Herein, a series of water-soluble perylene bisimide (PBI) derivatives containing a rigid and planar aromatic nanoscaffold with different size, shape, and electric charges were synthesized. Using histochemistry and cell viability assays on animal tissues and cancer cells, we revealed the molecular properties required for successful DNA intercalators to localize in cell nuclei and inhibit cancer cells. Small molecular size and the strong polarity of hydrophilic substituents are prerequisites for PBI-based DNA intercalators. A large number of charges facilitate the nucleic accumulation of these DNA intercalators, while fewer charges and planar aromatic nanoscaffold more efficiently inhibit cancer cell growth.

A terbium(III)-complex-based on-off fluorescent chemosensor for phosphate anions in aqueous solution and its application in molecular logic gates

A new Tb(III) complex based on a tripodal carboxylate ligand has been synthesized for the selective fluorescent recognition of phosphate anions, including inorganic phosphates and nucleoside phosphates (e.g., ATP), in Tris buffer solution. The resulting L · Tb complex shows the characteristic emission bands centered at about 495 and 550 nm from the Tb(III)-centered (5)D4 excited state to (7)FJ transitions with J = 6 and 5, where the chelating ligand acts only as an "antenna". Upon the addition of phosphate anions to the aqueous solution of Tb(III) complex, significant "on-off" fluorescence changes were observed, which were attributed to the inhibition of the "antenna" effect between the ligand and Tb(III) after the incorporation of phosphate anions. Furthermore, this unique Tb(III) complex has been successfully utilized to detect phosphate anions with filter papers and hydrogels. Notably, the Tb(III) complex also can be used for the construction of molecular logic gates with TRANSFER and INHIBIT logic functions by using the above fluorescence changes.

Two dinuclear Ru(II) polypyridyl complexes with different photophysical and cation recognition properties

Two dinuclear Ru(II) polypyridyl complexes functionalized with vacant coordination sites have been designed and synthesized. Their photophysical properties and interactions with various metal ions have been investigated at room temperature. The two complexes exhibit different UV/Vis absorption and emission intensities. When titrated with various metal ions, complex [{Ru(bpy)2}2(μ2-L(1))](4+) exhibits a notable fluorescence quenching in the presence of Cu(2+) in H2O-CH3CN media (1:1, v/v); its analogous complex [{Ru(bpy)2}2(μ2-L(2))](4+) exhibits no cation selectivity, the fluorescence intensity of complex [{Ru(bpy)2}2(μ2-L(2))](4+) has been enhanced by several transition metal ions due to prevention of the photo-induced electron transfer process. The fluorescence titration spectra and Benesi-Hildebrand expression reveal the formation of a 1:1 bonding mode between [{Ru(bpy)2}2(μ2-L(1))](4+) and Cu(2+) ion with the association constant of 5.50×10(4) M(-1).

Near-infrared fluorescence probe for the determination of acid phosphatase and imaging of prostate cancer cells

In this paper, we developed a near-infrared mercaptopropionic acid (MPA)-capped CuInS2 quantum dot (QD) fluorescence probe for the detection of acid phosphatases (ACP), which is an important biomarker and indicator of prostate cancer. The fluorescence of CuInS2 QDs could be quenched by Cu(2+), and then the addition of adenosine-5'-triphosphate (ATP) could effectively turn on the quenched fluorescence due to the strong interaction between Cu(2+) and ATP. The ACP could catalyze the hydrolysis of ATP, which would disassemble the complex of Cu(2+)-ATP. Therefore, the recovered fluorescence could be quenched again by the addition of ACP. In our method, the limit of detection (LOD) is considerably low for ACP detection in solution. Using the CuInS2 QDs fluorescence probe, we successfully performed in vitro imaging of human prostate cancer cells.

Halochromic and hydrochromic squaric acid functionalized perylene bisimide

A squaric acid functionalized perylene bisimide senses solvent polarity, pH and humidity through the intramolecular charge transfer initiated by protonation/deprotonation.

Making pyrophosphate visible: the first precipitable and real-time fluorescent sensor for pyrophosphate in aqueous solution

An in situ generated Zn²⁺ complex of di-2-(picoly) amine BINOL–DPA was presented as a precipitable and real-time fluorescent sensor for PPi with a detection limit of 95 nm, and it could be successfully applied in imaging PPi in living cells.

Supramolecular assembly of dipeptide functionalized benzo[ghi]perylene monoimide directs white light emission via donor–acceptor interactions

Optical and self-assembly nature of an aromatic dipeptide Phe-Phe (FF) functionalized benzo[ghi]perylene monoimide (BPI) are studied. Acceptor BPI-FF-OMe molecule shows white light emission upon energy transfer from donor pyrenebutyric acid molecule.

A highly fluorescent zinc complex of a dipodal N-acyl hydrazone as a selective sensor for H2PO4− ions and application in living cells

A dipodal N-acyl hydrazone receptor (R1) was synthesized in a single step, and utilized as a test probe for the selective sensing of metal ions as well as anions.

Aggregation deaggregation influenced selective and sensitive detection of Cu2+ and ATP by histidine functionalized water-soluble fluorescent perylene diimide under physiological conditions and in living cells

A novel PDI-HIS probe detects Cu²⁺ to form aggregated nonfluorescent complex. Addition of 0.58 ppm ATP to this complex causes its rapid disaggregation thereby recovering the fluorescence by ∼99% in vitro and in A549 living cells.

Assembly modulation of PDI derivative as a supramolecular fluorescence switching probe for detection of cationic surfactant and metal ions in aqueous media

We report an amphiphilic perylene diimide (1), a bimolecular analog of l-3,4-dihydroxyphenylalanine (L-DOPA), as a reversible fluorescence switching probe for the detection and sensing of cationic surfactants and Fe(3+)/Cu(2+) in an aqueous media respectively by means of host-guest interactions driven assembly and disassembly of 1. Photophysical studies of 1, going from dimethyl sulfoxide (DMSO) (State-I) to pure aqueous medium (State-II), suggested the formation of self-assembled aggregates by displaying very weak fluorescence emission along with red shifted broad absorption bands. Interestingly, the cationic surfactant cetyltrimethylammonium bromide (CTAB) could disassemble 1 in miceller conditions by restoring bright yellow fluorescence and vibronically well-defined (Franck-Condon progressions A0-0/A0-1 ≈ 1.6) absorption bands of 1 over other neutral and anionic surfactants (State-III). Owing to the metal chelating nature of L-DOPA, 1 was able to sense Fe(3+) and Cu(2+) among a pool of other metal ions by means of fluorescence switching off state, attributed to metal interaction driven assembly of 1 (State-IV). Such metallosupramolecular assemblies were found to reverse back to the fluorescence switching on state using a metal ion chelator, diethylenetriaminepentaacetic acid (DTPA, State-III), further signifying the role of metal ions toward assembly of 1. Formation of assembly and disassembly could be visualized by the diminished and increased yellow emission under green laser light. Further, the assembly-disassembly modulation of 1 has been extensively characterized using infrared (IR), mass spectrometry, microscopy and dynamic light scattering (DLS) techniques. Therefore, modulation of the molecular self-assembly of PDI derivative 1 in aqueous media (assembled state, State-II) by means of host-guest interactions provided by micellar structures of CTAB (disassembled state, State-III), metal ion (Fe(3+) and Cu(2+)) interactions (assembled state, State-IV) and metal ion sequestration using DTPA (disassembled state, State-III) is viewed as a supramolecular reversible fluorescence switching off-on probe for cationic surfactant CTAB and Fe(3+)/Cu(2+).

Probing the sensory property of perylenediimide derivatives in hydrazine gas: core-substituted aromatic group effect

In this contribution, four perylenediimide derivatives (PTCDIs) with different core-substituted aromatic groups were prepared. Studies on their sensing properties in hydrazine vapor (10 ppm)  suggested ∼5 orders of the magnitude in increased current for core-phenyl-substituted DEY was achieved and this value is 9, 9, and 24 times higher than that of core-pyridyl-substituted DSPY, DFPY, and DTPY, respectively. The differential response to the hydrazine vapor is less dependent on their surface area and morphologies. The lower LUMO energy and activation energy with smaller interplanar spacing allows DEY highly efficient sensing performance. A similar face-face packing mode and LUMO energy of DSPY and DFPY lead to both of them exhibiting the same sensing performance, while higher LUMO energy and head-to-tail packing modes with a greater interplanar spacing induce the less-efficient sensing performance of DTPY sensors. Discussions for structure-function relationships suggested that aromatic groups in the bay region have significant impact on PTCDI sensing performance by modulating energy level, interplanar spacing, and stacking modes.

A fluorescent perylene-assembled polyvinylpyrrolidone film: synthesis, morphology and nanostructure

A fluorescent polyvinylpyrrolidone (PVP) film with assembled nanostructures is successfully prepared in one pot by using perylene-3,4,9,10-tetracarboxylic acid dianhydride (PDA) as the fluorophore. The reactive anhydride groups in PDA play an important role in the covalent bonding of fluorescent molecules in the fluorescent PVP film, which has been demonstrated by a small-molecule model reaction. Interestingly, rod-like structures are found on the surface of the fluorescent film, which is attributed to the π-π interaction of PDA that occurred in the crosslinked PVP film. Further polarized optical microscopy (POM), X-ray diffraction (XRD) and optical analyses demonstrate the stable existence of π-conjugated nanostructures in the fluorescent PDA-based PVP film. The reactive anhydrides and the π-π interaction of perylene molecules are essential for the fabrication of the fluorescent perylene-assembled PVP film. This method could be extended to the preparation of the fluorescent PVP film with self-assembled nanostructures.

Perylene diimide appended with 8-hydroxyquinoline for ratiometric detection of Cu2+ ions and metal displacement driven "turn on" cyanide sensing

Perylene diimide (PDI) 3 and 4 appended with 8-hydroxyquinoline derivatives have been synthesized and their photophysical and spectroscopic properties have been experimentally determined. Moreover, PDIs 3 and 4 show ratiometric behavior to detect Cu(2+) colorimetrically with visible color change from coral red to light pink, whereas 3 and 4 show "turn-off" behavior in fluorescence with lowest limit of detection 5 × 10(-7) M. The PDI 3 could be further utilized for ratiometric CN(-) detection colorimetrically and as "turn-on" sensor for CN(-) detection fluorometrically with lowest limit of detection 8 × 10(-6) M. The comparison of spectroscopic properties of PDI 1-4 highlights the importance of linking 8-hydroxyquinoline units on the PDI core at bay position for achieving Cu(2+) recognition event into ratiometric signal.

Cysteamine CdS quantum dots decorated with Fe3+ as a fluorescence sensor for the detection of PPi

A new sensitive and selective fluorescence sensor for the detection of pyrophosphate (PPi) in aqueous media based on the Fe(3+) decorated cysteamine CdS QDs ([Cys-CdS QDs]-Fe(3+)) was proposed. The presence of PPi can induce the fluorescence quenching of [Cys-CdS QDs]-Fe(3+) due to the high formation constants between the phosphate group and Fe(3+). Because the complex between Fe(3+) and PPi acts as an efficient quencher, the concentration of PPi can be evaluated by tracking the degree of fluorescence quenching. The fabricated sensor was optimized to obtain the best sensor selectivity and sensitivity. Under optimal conditions, a linear relationship between the fluorescence response and the concentration of PPi was established in the range of 0.5-10 μM. The limits of detection and quantitation for PPi were found to be 0.11 and 2.78 μM, respectively. Furthermore, the proposed sensor exhibited high selectivity toward PPi relative to other common anions. The proposed sensor was successfully applied to the detection of PPi in urine samples with satisfactory results.

NIR sensing of Zn(ii) and subsequent dihydrogen phosphate detection by a benzothiazole functionalized ninhydrin based receptor

Zn²⁺ responsive (NIR) benzothiazole functionalized ninhydrin based receptor selectively sense H₂PO₄⁻ ion.

Aspartic acid functionalized water-soluble perylene diimide as "Off-On" fluorescent sensor for selective detection Cu(2+) and ATP

Aspartic functionalized water-soluble perylene diimide, N,N'-di(2-succinic acid)-perylene-3,4,9,10-tetracarboxylic diimide (PASP) has two absorbance maximums at 527 and 498nm (ε≈1.7×10(4)Lcm(-1)mol(-1)) and two emission peaks at 547 and 587nm respectively. Emission intensities decrease with the increase of PASP concentrations in 20-100μM ranges. Spectral titrations demonstrate that each PASP can coordinate to two Cu(2+) ions in the absence of HEPES buffer. Its stability constant is estimated to be about 1.0×10(12)L(2)mol(-2) at pH 7.20 and its coordinate stoichiometry increased to 7.5 in the same pH in the presence of HEPES buffer. The emission of PASP will be completely quenched upon formation of Cu(2+) complex. The lowest "turn-off" fluorescence detection limit was calculated to be 0.3μM Cu(2+). PASP-Cu solution was used as a "turn-on" fluorescence biosensor to detect ATP. The sensitivity towards ATP is 0.3μM in 50mM HEPES buffer at pH 7.20, which is one of the most sensitive fluorescence sensors.

Blue-emitting self-assembled polymer electrolytes for fast, sensitive, label-free detection of Cu(II) ions in aqueous media

We have developed a light-emitting material based on nonconjugated block copolymers that contain polystyrene sulfonate (PSS) chains. The confinement of the PSS chains within nanosized domains appeared to be a powerful means of achieving enhanced fluorescence signals. High fluorescence quantum yield, with a maximum value of 37%, was obtained by adjusting the types of self-assembled morphologies of PSS-containing block copolymers; in contrast, the fluorescence quantum yield was merely 5% for the PSS homopolymer lacking organization. The wavelength of fluorescence emission was tunable by rational molecular design. In addition, significant self-quenching behavior was not noticed in diverse forms of this material such as solutions, thin films, and free-standing membranes. Notably, the light-emitting self-assembled block copolymer electrolytes exhibited high sensitivity toward Cu(2+) ions, with a detection limit of parts per billion levels, rapid response time of ≤1 min, and insignificant interference of other competitive metal ions.