Single-molecule imaging of cell surfaces using near-field nanoscopy

Ultrabright bowtie nanoaperture antenna probes studied by single molecule fluorescence

We report on a novel design for the fabrication of ultrabright bowtie nanoaperture antenna (BNA) probes to breach the intrinsic trade-off between power transmission and field confinement of circular nanoapertures as in near-field scanning optical microscopy (NSOM) or planar zero mode waveguides. The approach relies on the nanofabrication of BNAs at the apex of tapered optical fibers tuned to diameters close to their cutoff region, resulting in 10(3)× total improvement in throughput over conventional NSOM probes of similar confinement area. By using individual fluorescence molecules as optical nanosensors, we show for the first time nanoimaging of single molecules using BNA probes with an optical confinement of 80 nm, measured the 3D near-field emanating from these nanostructures and determined a ~6-fold enhancement on the single molecule signal. The broadband field enhancement, nanoscale confinement, and background free illumination provided by these nanostructures offer excellent perspectives as ultrabright optical nanosources for a full range of applications, including cellular nanoimaging, spectroscopy, and biosensing.

Biophysical characterization of a binding site for TLQP-21, a naturally occurring peptide which induces resistance to obesity

Recently, we demonstrated that TLQP-21 triggers lipolysis and induces resistance to obesity by reducing fat accumulation [1]. TLQP-21 is a 21 amino acid peptide cleavage product of the neuroprotein VGF and was first identified in rat brain. Although TLQP-21 biological activity and its molecular signaling is under active investigation, a receptor for TLQP-21 has not yet been characterized. We now demonstrate that TLQP-21 stimulates intracellular calcium mobilization in CHO cells. Furthermore, using Atomic Force Microscopy (AFM), we also provide evidence of TLQP-21 binding-site characteristics in CHO cells. AFM was used in force mapping mode equipped with a cantilever suitably functionalized with TLQP-21. Attraction of this functionalized probe to the cell surface was specific and consistent with the biological activity of TLQP-21; by contrast, there was no attraction of a probe functionalized with biologically inactive analogues. We detected interaction of the peptide with the binding-site by scanning the cell surface with the cantilever tip. The attractive force between TLQP-21 and its binding site was measured, statistically analyzed and quantified at approximately 40 pN on average, indicating a single class of binding sites. Furthermore we observed that the distribution of these binding sites on the surface was relatively uniform.

Integrated automated nanomanipulation and real-time cellular surface imaging for mechanical properties characterization

Surface microscopy of individual biological cells is essential for determining the patterns of cell migration to study the tumor formation or metastasis. This paper presents a correlated and effective theoretical and experimental technique to automatically address the biophysical and mechanical properties and acquire live images of biological cells which are of interest in studying cancer. In the theoretical part, a distributed-parameters model as the comprehensive representation of the microcantilever is presented along with a model of the contact force as a function of the indentation depth and mechanical properties of the biological sample. Analysis of the transfer function of the whole system in the frequency domain is carried out to characterize the stiffness and damping coefficients of the sample. In the experimental section, unlike the conventional atomic force microscope techniques basically using the laser for determining the deflection of microcantilever's tip, a piezoresistive microcantilever serving as a force sensor is implemented to produce the appropriate voltage and measure the deflection of the microcantilever. A micromanipulator robotic system is integrated with the MATLAB(®) and programmed in such a way to automatically control the microcantilever mounted on the tip of the micromanipulator to achieve the topography of biological samples including the human corneal cells. For this purpose, the human primary corneal fibroblasts are extracted and adhered on a sterilized culture dish and prepared to attain their topographical image. The proposed methodology herein allows an approach to obtain 2D quality images of cells being comparatively cost effective and extendable to obtain 3D images of individual cells. The characterized mechanical properties of the human corneal cell are furthermore established by comparing and validating the phase shift of the theoretical and experimental results of the frequency response.

Nanoscale Fluorescence Imaging of Single Amyloid Fibrils

Amyloid formation is implicated in a variety of human diseases. It is important to perform high-resolution optical imaging of individual amyloid fibrils to delineate the structural basis of supramolecular protein assembly. However, amyloid fibrils do not lend themselves to the conventional microscopic resolution, which is hindered by the diffraction limit. Here we show super-resolution fluorescence imaging of fluorescently stained amyloid fibrils derived from disease-associated human β2-microglobulin using near-field scanning fluorescence microscopy. Using this technique, we were able to resolve the fibrils that were spatially separated by ∼75 nm. We have also been able to interrogate individual fibrils in a fibril-by-fibril manner by simultaneously monitoring both nanoscale topography and fluorescence brightness along the length of the fibrils. This method holds promise to detect conformational distributions and heterogeneity that are believed to correlate with the supramolecular packing of misfolded proteins within the fibrils in a diverse conformationally enciphered prion strains and amyloid polymorphs.

A versatile "multiple fishhooks" approach for the study of ligand-receptor interactions using single-molecule atomic force microscopy

Despite the powerfulness of atomic force microscopy (AFM)-based single-molecule force spectroscopy in the study of ligand-receptor interactions, complicated cantilever functionalization and data interpretation have often been a great hurdle for its widespread application. Here, we present a much simplified experimental scheme by using a "multiple fishhooks" approach. In this strategy, multiple ligands are labeled on a single polymer chain, which forms complexes with receptors anchored on the substrate surface. Therefore, multiple single-bond rupture events can be captured in the same force-extension curves, similar to the widely used polyprotein approach. This method also allows nonsingle-molecule events and nonspecific interactions between cantilever and surface to be readily excluded from real data pool and greatly increases the quality and quantity of single-molecule data. The biggest advantage of our approach over the previously reported one is the choice of a naturally occurring polysaccharide, hyaluronan, the conformation of which in solution can be fine-tuned by pH, as the polymer backbone of the "multiple fishhooks" handle. Furthermore, our approach greatly simplifies the chemical synthesis of the polymer handle, allowing bioactive molecules to be easily one-step labeled on the handles in aqueous solution. We validate this strategy using the widely studied streptavidin-biotin system, and our single-molecule AFM results are in good agreement with previously reported ones. We anticipate that this novel strategy can be used as a versatile tool to study other complex and challenging ligand-receptor interactions.