Direct one-step 18F-labeling of peptides via nucleophilic aromatic substitution

New lyophilized kit for rapid radiofluorination of peptides

Radiolabeling compounds with positron-emitting radionuclides often involves a time-consuming, customized process. Herein, we report a simple lyophilized kit formulation for labeling peptides with (18)F, based on the aluminum-fluoride procedure. The prototype kit contains IMP485, a NODA (1,4,7-triazacyclononane-1,4-diacetate)-MPAA (methyl phenylacetic acid)-di-HSG (histamine-succinyl-glycine) hapten-peptide, [NODA-MPAA-D-Lys(HSG)-D-Tyr-D-Lys(HSG)-NH(2)], used for pretargeting, but we also examined a similar kit formulation for a somatostatin-binding peptide [IMP466, NOTA-D-Phe-Cys-Phe-D-Trp-Lys-Thr-Cys-Throl] bearing a NOTA ligand to determine if the benefits of using a kit can be extended to other AlF-binding peptides. The NODA-MPAA ligand forms a single stable complex with (AlF)(2+) in high yields. In order to establish suitable conditions for a facile kit, the formulation was optimized for pH, peptide to Al(3+) ratio, bulking agent, radioprotectant, and the buffer. For optimal labeling, the kit was reconstituted with an aqueous solution of (18)F(-) and ethanol (1:1), heated at 100-110 °C for 15 min, and then simply and rapidly purified using one of two equally effective solid-phase extraction (SPE) methods. Al(18)F-IMP485 was isolated as a single isomer complex, in high yield (45-97%) and high specific activity (up to 223 GBq/μmol), within 20 min. The labeled product was stable in human serum at 37 °C for 4 h and in vivo, urine samples showed the intact product was eliminated. Tumor targeting of the Al(18)F-IMP485 in nude mice bearing human colon cancer xenografts pretargeted with an anti-CEACAM5 bispecific antibody showed very low uptake (0.06% ± 0.02 ID/g) in bone, further illustrating its stability. At 1 h, pretargeted animals had high Al(18)F-IMP485 tumor uptake (28.1% ± 4.5 ID/g), with ratios of 9 ± 4, 123 ± 38, 110 ± 43, and 120 ± 108 for kidney, liver, blood and bone, respectively. Tumor uptake remained high at 3 h postinjection, with increased tumor/nontumor ratios. The NOTA-somatostatin-binding peptide also was fluorinated with good yield and high specific activity in the same kit formulation. However, yields were somewhat lower than those achieved with IMP485 containing the NODA-MPAA ligand, likely reflecting this ligand's superior binding properties over the simple NOTA. These studies indicate that (18)F-labeled peptides can be reproducibly prepared as stable Al-F complexes with good radiochemical yield and high specific activity using a simple, one-step, lyophilized kit followed by a rapid purification by SPE that provides the (18)F-peptide ready for patient injection within 30 min.

Fluoride-18 radiolabeling of peptides bearing an aminooxy functional group to a prosthetic ligand via an oxime bond

We have developed a novel F-18 prosthetic ligand named fluoro-PEG-benzaldehyde (FPBA) 1. [(18)F]-FPBA 1 is formed in situ from its radiolabeled precursor [(18)F]6. Compound 6 is efficiently synthesized in four steps starting from commercially available 6-bromo-3-pyridine carbaldehyde 2. [(18)F]-FPBA was evaluated as a prosthetic ligand to radiolabel three cyclic peptides bearing an aminooxy functional group at the N-terminus position. Acetal [(18)F]6 is purified by either solid-phase extraction (SPE) or reverse-phase HPLC with the overall radiochemical yields (RCY) and radiochemical purity (RCP) in very close agreement. The SPE purification process has the advantage of shorter reaction times (71-87 min for entire reaction sequence), while the use of the reverse-phase HPLC purification process allows the use of up to fifty times less of the expensive synthetic peptides (~ 50 nmol) in the oxime coupling reaction. We have demonstrated an efficient methodology in the production of [(18)F]-FPBA 1 and demonstrated its use as a prosthetic ligand for the labeling of peptides possessing an aminooxy functional group.

High-yielding aqueous 18F-labeling of peptides via Al18F chelation

The coordination chemistry of a new pentadentate bifunctional chelator (BFC), NODA-MPAA 1, containing the 1,4,7-triazacyclononane-1,4-diacetate (NODA) motif with a methylphenylacetic acid (MPAA) backbone, and its ability to form stable Al(18)F chelates were investigated. The organofluoroaluminates were easily accessible from the reaction of 1 and AlF(3). X-ray diffraction studies revealed aluminum at the center of a slightly distorted octahedron, with fluorine occupying one of the axial positions. The tert-butyl protected prochelator 7, which can be synthesized in one step, is useful for coupling to biomolecules on solid phase or in solution. High yield (55-89%) aqueous (18)F-labeling was achieved in 10-15 min with a tumor-targeting peptide 4 covalently linked to 1. Defluorination was not observed for at least 4 h in human serum at 37 °C. These results demonstrate the facile application of Al(18)F chelation using BFC 1 as a versatile labeling method for radiofluorinating other heat-stable peptides for positron emission imaging.

Molecular Imaging of Hypoxia: Strategies for Probe Design and Application

Tumor hypoxia is a negative prognostic factor and its precise imaging is of great relevance to therapy planning. The present review summarizes various strategies of probe design for imaging hypoxia with a variety of techniques such as PET, SPECT and fluorescence imaging. Synthesis of some important probes that are used for preclinical and clinical imaging and their mechanism of binding in hypoxia are also discussed.

Microwave-assisted one-pot synthesis of N-succinimidyl-4[ ¹⁸F]fluorobenzoate ([¹⁸F]SFB)

Biomolecules, including peptides¹⁻⁹, proteins¹⁰⁻¹¹, and antibodies and their engineered fragments¹²⁻¹⁴, are gaining importance as both potential therapeutics and molecular imaging agents. Notably, when labeled with positron-emitting radioisotopes (e.g., Cu-64, Ga-68, or F-18), they can be used as probes for targeted imaging of many physiological and pathological processes.¹⁵⁻¹⁸ Therefore, significant effort has devoted to the synthesis and exploration of ¹⁸F-labeled biomolecules. Although there are elegant examples of the direct ¹⁸F-labeling of peptides,¹⁹⁻²² the harsh reaction conditions (i.e., organic solvent, extreme pH, high temperature) associated with direct radiofluorination are usually incompatible with fragile protein samples. To date, therefore, the incorporation of radiolabeled prosthetic groups into biomolecules remains the method of choice.²³(,)²⁴ N-Succinimidyl-4-[¹⁸F]fluorobenzoate ([¹⁸F]SFB),²⁵⁻³⁷ a Bolton-Hunter type reagent that reacts with the primary amino groups of biomolecules, is a very versatile prosthetic group for the ¹⁸F-labeling of a wide spectrum of biological entities, in terms of its evident in vivo stability and high radiolabeling yield. After labeling with [¹⁸F]SFB, the resulting [F]fluorobenzoylated biomolecules could be explored as potential PET tracers for in vivo imaging studies.¹ Most [¹⁸F]SFB radiosyntheses described in the current literatures require two or even three reactors and multiple purifications by using either solid phase extraction (SPE) or high-performance liquid chromatography (HPLC). Such lengthy processes hamper its routine production and widespread applications in the radiolabeling of biomolecules. Although several module-assisted [¹⁸F]SFB syntheses have been reported²⁹⁻³²,⁴¹⁻⁴² they are mainly based on complicated and lengthy procedures using costly commercially-available radiochemistry boxes (Table 1). Therefore, further simplification of the radiosynthesis of [¹⁸F]SFB using a low-cost setup would be very beneficial for its adaption to an automated process. Herein, we report a concise preparation of [¹⁸F]SFB, based on a simplified one-pot microwave-assisted synthesis (Figure 1). Our approach does not require purification between steps or any aqueous reagents. In addition, microwave irradiation, which has been used in the syntheses of several PET tracers,³⁸⁻⁴¹ can gives higher RCYs and better selectivity than the corresponding thermal reactions or they provide similar yields in shorter reaction times.³⁸Most importantly, when labeling biomolecules, the time saved could be diverted to subsequent bioconjugation or PET imaging step. ²⁸(,)⁴³The novelty of our improved [¹⁸F]SFB synthesis is two-fold: (1) the anhydrous deprotection strategy requires no purification of intermediate(s) between each step and (2) the microwave-assisted radiochemical transformations enable the rapid, reliable production of [¹⁸F]SFB.

Radiosynthesis of a new PSMA targeting ligand ([18F]FPy-DUPA-Pep)

Due to the specificity of expression of PSMA (prostate specific membrane antigen) particularly in prostate cancer cells (e.g. LNCaP), numerous PSMA ligands have been synthesized until now. In the current study, we synthesized DUPA-Pep having 2-[3-(1,3-dicarboxypropyl)ureido]pentanedioic acid (DUPA) linked via 8-aminooctanoic acid to two phenylalanine residues and chose 6-[(18)F]fluoronicotinic acid 2,3,5,6-tetrafluorophenyl ester [(18)F]FPy-TFP as a prosthetic group for coupling. [(18)F]FPy-DUPA-Pep was obtained in a radiochemical yield of 48±0.9% (decay uncorrected) within 50 min with a chemical purity of >98%.

Syntheses of meta-[F]Fluorobenzaldehyde and meta-[F]Fluorobenzylbromide from Phenyl(3-Formylphenyl) Iodonium Salt Precursors

(18)F-labeled fluorobenzaldehydes and fluorobenzylbromides are useful synthons for the preparation of PET radiopharmaceuticals. Whereas ortho- and para-[(18)F]fluorobenzaldehydes can easily be prepared with high yields, the corresponding meta- derivatives are more problematic. In order to improve the yield of meta-[(18)F]fluorobenzaldehyde we used the corresponding diaryliodonium salt precursors, since diaryliodonium salts had already been used as precursors in preparations of (18)F-labeled electron rich, as well as electron deficient, aromatic rings. Diaryliodonium salts with different counter ions [PhIPhCHO]X (X = Cl, Br, OTs, OTf) were synthesized. (18)F radiolabeling was performed using different bases at different temperatures in the presence of a radical scavenger, 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO). The best conversion (~80%) to meta-[(18)F] fluorobenzaldehyde was obtained using CsHCO(3) base at a reaction temperature of 110 °C. To study iodonium salt counter ion effects on radiofluorination, each precursor was separately treated with CsF[(18)F]/CsHCO(3) in DMF at 110 °C for 5 min in the presence of TEMPO. Our observed reactivity order was OTs Collapse

Key Words

• ¹⁸f radiolabeling
• iodonium salt precursors
• meta-[¹⁸f]fluorobenzaldehyde
• meta-[¹⁸f]fluorobenzylbromide

Collapse

MESH Headings Collapse

Grants

• ZIA HL005090-05 Intramural NIH HHS

Collapse

Affiliation(s)

Falguni Basuli Imaging Probe Development Center, National Heart, Lung, and Blood Institute, National Institutes of Health, Rockville, MD 20850
Haitao Wu Imaging Probe Development Center, National Heart, Lung, and Blood Institute, National Institutes of Health, Rockville, MD 20850
Gary L. Griffiths Imaging Probe Development Center, National Heart, Lung, and Blood Institute, National Institutes of Health, Rockville, MD 20850

Collapse

Rapid and simple one-step F-18 labeling of peptides

Labeling biomolecules with ¹⁸F is usually done through coupling with prosthetic groups, which requires several time-consuming radiosynthesis steps and therefore in low labeling yield. In this study, we designed a simple one-step ¹⁸F-labeling strategy to replace the conventional complex and the long process of multiple-step radiolabeling procedure. Both monomeric and dimeric cyclic RGD peptides were modified to contain 4-NO₂-3-CF₃ arene as precursors for direct ¹⁸F labeling. Binding of the two functionalized peptides to integrin α(v)β₃ was tested in vitro using the MDA-MB-435 human breast cell line. The most promising functionalized peptide, the dimeric cyclic RGD, was further evaluated in vivo in an orthotopic MDA-MB-435 tumor xenograft model. The use of relatively low amount of precursor (~0.5 μmol) gave reasonable yield, ranging from 7 to 23% (decay corrected, calculated from the start of synthesis) after HPLC purification. Overall reaction time was 40 min, and the specific activity of the labeled peptide was high. Modification of RGD peptides did not significantly change the biological binding affinities of the modified peptides. Small animal PET and biodistribution studies revealed integrin specific tumor uptake and favorable biokinetics. We have developed a novel one-step ¹⁸F radiolabeling strategy for peptides that contain a specific arene group, which shortens reaction time and labor significantly, requires low amount of precursor, and results in specific activity of 79 ± 13 GBq/μmol. Successful introduction of 4-fluoro-3-trifluoromethylbenzamide into RGD peptides may be a general strategy applicable to other biologically active peptides and proteins.

In vitro and in vivo characterization of novel 18F-labeled bombesin analogues for targeting GRPR-positive tumors

The gastrin-releasing peptide receptor (GRPR) is overexpressed on a number of human tumors and has been targeted with radiolabeled bombesin analogues for the diagnosis and therapy of these cancers. Seven bombesin analogues containing various linkers and peptide sequences were designed, synthesized, radiolabeled with (18)F, and characterized in vitro and in vivo as potential PET imaging agents. Binding studies displayed nanomolar binding affinities toward human GRPR for all synthesized bombesin analogues. Two high-affinity peptide candidates 6b (K(i) = 0.7 nM) and 7b (K(i) = 0.1 nM) were chosen for further in vivo evaluation. Both tracers revealed specific uptake in GRPR-expressing PC-3 tumors and the pancreas. Compared to [(18)F]6b, compound [(18)F]7b was characterized by superior tumor uptake, higher specificity of tracer uptake, and more favorable tumor-to-nontarget ratios. In vivo PET imaging allowed for the visualization of PC-3 tumor in nude mice suggesting that [(18)F]7b is a promising PET tracer candidate for the diagnosis of GRPR-positive tumors in humans.

18F-labeled bombesin analog for specific and effective targeting of prostate tumors expressing gastrin-releasing peptide receptors

Bombesin is a peptide exhibiting high affinity for the gastrin-releasing peptide receptor (GRPr), which is highly overexpressed on prostate cancer cells. In the present study, we developed an (18)F-labeled bombesin analog, (18)F-BAY 86-4367, which is currently being clinically tested for use in PET of prostate cancer.

METHODS

In vitro pharmacologic studies were performed to characterize the nonradioactive ((19)F) standard of the bombesin analog for binding affinity and selectivity for GRPr. The stability of (18)F-BAY 86-4367 was determined in murine and human plasma. In vivo, the tumor-targeting potential and pharmacokinetic profile of the (18)F tracer were analyzed with biodistribution experiments and PET studies of prostate tumor-bearing mice.

RESULTS

The nonradioactive ((19)F) standard of the bombesin analog showed subnanomolar and GRPr-selective binding affinity. The stability of the tracer in murine and human plasma was found to be high. In 2 prostate cancer xenograft models (PC-3 and LNCaP), (18)F-BAY 86-4367 showed more specific and effective GRPr-based targeting in vivo than the benchmark radiotracers (18)F-fluoroethylcholine and (18)F-FDG. In addition, rapid tumor targeting and fast renal excretion (∼70%) and hepatobiliary excretion (∼10%) were identified in both xenograft models. Furthermore, PET studies provided clear and specific visualization of PC-3 tumors in mice.

CONCLUSION

Favorable preclinical data showing specific and effective tumor targeting by (18)F-BAY 86-4367 suggest that a clinical trial be undertaken to test its diagnostic utility in PET for prostate carcinoma patients.

Automated radiochemical synthesis of [18F]FBEM: a thiol reactive synthon for radiofluorination of peptides and proteins

The automated radiochemical synthesis of N-[2-(4-[(18)F]fluorobenzamido)ethyl]maleimide ([(18)F]FBEM, IUPAC name: N-maleoylethyl-4-[(18)F]fluorobenzamide), a prosthetic group for radiolabeling the free sulfhydryl groups of peptides and proteins, is herein described. 4-[(18)F]fluorobenzoic acid was first prepared by nucleophilic displacement of a trimethylammonium moiety on a pentamethylbenzyl benzoate ester with [(18)F]fluoride. In the second step the ester was cleaved under acidic conditions. Finally, 4-[(18)F]fluorobenzoic acid was coupled to N-(2-aminoethyl)maleimide using diethylcyanophosphate and diisopropylethyl amine. Following high-performance liquid chromatography (HPLC) purification, [(18)F]FBEM was obtained in 17.3±7.1% yield (not decay corrected) in approximately 95 min. Isolation from the HPLC eluate and preparation for subsequent use, which was conducted manually, required an additional 10-15 min. The measured specific activity for three batches was 181.3, 251.6, and 351.5 GBq/μmol at the end of bombardment (EOB).

Improved 18F labeling of peptides with a fluoride-aluminum-chelate complex

We reported previously the feasibility to radiolabel peptides with fluorine-18 ((18)F) using a rapid one-pot method that first mixes (18)F(-) with Al(3+) and then binds the (Al(18)F)(2+) complex to a NOTA ligand on the peptide. In this report, we examined several new NOTA ligands and determined how temperature, reaction time, and reagent concentration affected the radiolabeling yield. Four structural variations of the NOTA ligand had isolated radiolabeling yields ranging from 5.8% to 87% under similar reaction conditions. All of the Al(18)F NOTA complexes were stable in vitro in human serum, and those that were tested in vivo also were stable. The radiolabeling reactions were performed at 100 degrees C, and the peptides could be labeled in as little as 5 min. The IMP467 peptide could be labeled up to 115 GBq/micromol (3100 Ci/mmol), with a total reaction and purification time of 30 min without chromatographic purification.