Characterization of a naturally occurring trans-splicing intein from Synechocystis sp. PCC6803

Photomodulation of protein trans-splicing through backbone photocaging of the DnaE split intein

A novel strategy to modulate the assembly and trans-splicing activity of the Ssp DnaE split-intein was achieved by introducing two photolabile protecting groups onto the backbone of the C-intein polypeptide. This modification was not only able to efficiently block the trans-splicing activity, but also reduce significantly the binding affinity constant between the C- and N-intein fragments. The original activity of the wild-type split intein could be fully recovered by brief exposure to UV light.

Branched intermediate formation stimulates peptide bond cleavage in protein splicing

Protein splicing is a posttranslational modification in which an intein domain excises itself out of a host protein. Here, we investigate how the steps in the splicing process are coordinated so as to maximize the production of the final splice products and minimize the generation of undesired cleavage products. Our approach has been to prepare a branched intermediate (and analogs thereof) of the Mxe GyrA intein using protein semi-synthesis. Kinetic analysis of these molecules indicates that the high fidelity of this protein splicing reaction results from the penultimate step in the process (intein-succinimide formation) being rate-limiting. NMR experiments indicate that formation of the branched intermediate affects the local structure around the amide bond cleaved during succinimide formation. We propose that this structural change reflects a re-organization of the catalytic apparatus to accelerate succinimide formation at the C-terminal splice junction.

Controllable protein cleavages through intein fragment complementation

Intein-based protein cleavages, if carried out in a controllable way, can be useful tools of recombinant protein purification, ligation, and cyclization. However, existing methods using contiguous inteins were often complicated by spontaneous cleavages, which could severely reduce the yield of the desired protein product. Here we demonstrate a new method of controllable cleavages without any spontaneous cleavage, using an artificial S1 split-intein consisting of an 11-aa N-intein (I(N)) and a 144-aa C-intein (I(C)). In a C-cleavage design, the I(C) sequence was embedded in a recombinant precursor protein, and the small I(N) was used as a synthetic peptide to trigger a cleavage at the C-terminus of I(C). In an N-cleavage design, the short I(N) sequence was embedded in a recombinant precursor protein, and the separately produced I(C) protein was used to catalyze a cleavage at the N-terminus of I(N). These N- and C-cleavages showed >95% efficiency, and both successfully avoided any spontaneous cleavage during expression and purification of the precursor proteins. The N-cleavage design also revealed an unexpected and interesting structural flexibility of the I(C) protein. These findings significantly expand the effectiveness of intein-based protein cleavages, and they also reveal important insights of intein structural flexibility and fragment complementation.

Protein C-terminal labeling and biotinylation using synthetic peptide and split-intein

Background

Site-specific protein labeling or modification can facilitate the characterization of proteins with respect to their structure, folding, and interaction with other proteins. However, current methods of site-specific protein labeling are few and with limitations, therefore new methods are needed to satisfy the increasing need and sophistications of protein labeling.

Methodology

A method of protein C-terminal labeling was developed using a non-canonical split-intein, through an intein-catalyzed trans-splicing reaction between a protein and a small synthetic peptide carrying the desired labeling groups. As demonstrations of this method, three different proteins were efficiently labeled at their C-termini with two different labels (fluorescein and biotin) either in solution or on a solid surface, and a transferrin receptor protein was labeled on the membrane surface of live mammalian cells. Protein biotinylation and immobilization on a streptavidin-coated surface were also achieved in a cell lysate without prior purification of the target protein.

Conclusions

We have produced a method of site-specific labeling or modification at the C-termini of recombinant proteins. This method compares favorably with previous protein labeling methods and has several unique advantages. It is expected to have many potential applications in protein engineering and research, which include fluorescent labeling for monitoring protein folding, location, and trafficking in cells, and biotinylation for protein immobilization on streptavidin-coated surfaces including protein microchips. The types of chemical labeling may be limited only by the ability of chemical synthesis to produce the small C-intein peptide containing the desired chemical groups.

Splicing of the mycobacteriophage Bethlehem DnaB intein: identification of a new mechanistic class of inteins that contain an obligate block F nucleophile

Inteins are single turnover enzymes that splice out of protein precursors during maturation of the host protein (extein). The Cys or Ser at the N terminus of most inteins initiates a four-step protein splicing reaction by forming a (thio)ester bond at the N-terminal splice junction. Several recently identified inteins cannot perform this acyl rearrangement because they do not begin with Cys, Thr, or Ser. This study analyzes one of these, the mycobacteriophage Bethlehem DnaB intein, which we describe here as the prototype for a new class of inteins based on sequence comparisons, reactivity, and mechanism. These Class 3 inteins are characterized by a non-nucleophilic N-terminal residue that co-varies with a non-contiguous Trp, Cys, Thr triplet (WCT) and a Thr or Ser as the first C-extein residue. Several mechanistic differences were observed when compared with standard inteins or previously studied atypical KlbA Ala¹ inteins: (a) cleavage at the N-terminal splice junction in the absence of all standard N- and C-terminal splice junction nucleophiles, (b) activation of the N-terminal splice junction by a variant Block B motif that includes the WCT triplet Trp, (c) decay of the branched intermediate by thiols or Cys despite an ester linkage at the C-extein branch point, and (d) an absolute requirement for the WCT triplet Block F Cys. Based on biochemical data and confirmed by molecular modeling, we propose roles for these newly identified conserved residues, a novel protein splicing mechanism that includes a second branched intermediate, and an intein classification with three mechanistic categories.

Modulation of intein activity by its neighboring extein substrates

Inteins comprise a large family of phylogenetically widespread self-splicing protein catalysts that colonize diverse host proteins. The evolutionary and functional relationship between the intein and the split-host protein, the exteins, is largely unknown. To probe an association, we developed an in vivo and in vitro intein assay based on FRET. The FRET assay reports cleavage of the intein from its N-terminal extein. Applying this assay to randomized extein libraries, we show that the nature of the extein substrate bordering the intein can profoundly influence intein activity. Residues proximal to the intein-splicing junction in both N- and C-terminal exteins can accelerate the N-terminal cleavage rate by >4-fold or attenuate cleavage by 1,000-fold, both resulting in compromised self-splicing efficiency. The existence and the magnitude of extein effects require consideration for maximizing the utility of inteins in biotechnological applications, and they predict biases in intein integration sites in nature.

In vivo and in vitro protein ligation by naturally occurring and engineered split DnaE inteins

Background

Protein trans-splicing by naturally occurring split DnaE inteins is used for protein ligation of foreign peptide fragments. In order to widen biotechnological applications of protein trans-splicing, it is highly desirable to have split inteins with shorter C-terminal fragments, which can be chemically synthesized.

Principal Findings

We report the identification of new functional split sites in DnaE inteins from Synechocystis sp. PCC6803 and from Nostoc punctiforme. One of the newly engineered split intein bearing C-terminal 15 residues showed more robust protein trans-splicing activity than naturally occurring split DnaE inteins in a foreign context. During the course of our experiments, we found that protein ligation by protein trans-splicing depended not only on the splicing junction sequences, but also on the foreign extein sequences. Furthermore, we could classify the protein trans-splicing reactions in foreign contexts with a simple kinetic model into three groups according to their kinetic parameters in the presence of various reducing agents.

Conclusion

The shorter C-intein of the newly engineered split intein could be a useful tool for biotechnological applications including protein modification, incorporation of chemical probes, and segmental isotopic labelling. Based on kinetic analysis of the protein splicing reactions, we propose a general strategy to improve ligation yields by protein trans-splicing, which could significantly enhance the applications of protein ligation by protein trans-splicing.

Solution structure of DnaE intein from Nostoc punctiforme: structural basis for the design of a new split intein suitable for site-specific chemical modification

Naturally split DnaE intein from Nostoc punctiforme (Npu) has robust protein trans-splicing activity and high tolerance of sequence variations at the splicing junctions. We determined the solution structure of a single chain variant of NpuDnaE intein by NMR spectroscopy. Based on the NMR structure and the backbone dynamics of the single chain NpuDnaE intein, we designed a functional split variant of the NpuDnaE intein having a short C-terminal half (C-intein) composed of six residues. In vivo and in vitro protein ligation of model proteins by the newly designed split intein were demonstrated.

The naturally split Npu DnaE intein exhibits an extraordinarily high rate in the protein trans-splicing reaction

We have studied the naturally split alpha subunit of the DNA polymerase III (DnaE) intein from Nostoc punctiforme PCC73102 (Npu) using purified proteins and determined an apparent first-order rate constant of (1.1+/-0.2)x10(-2) s(-1) at 37 degrees C. This represents the highest rate reported for the protein trans-splicing reaction so far (t(1/2) of approximately 60s). Furthermore, the reaction was very robust and high-yielding with respect to different extein sequences, temperatures from 6 to 37 degrees C, and the presence of up to 6 M urea. Given these outstanding properties, the Npu DnaE intein appears to be the intein of choice for many applications in protein and cellular chemistry.

Segmental isotopic labeling of proteins for nuclear magnetic resonance

Nuclear magnetic resonance (NMR) spectroscopy has emerged as one of the principle techniques of structural biology. It is not only a powerful method for elucidating the three-dimensional structures under near physiological conditions but also a convenient method for studying protein-ligand interactions and protein dynamics. A major drawback of macromolecular NMR is its size limitation, caused by slower tumbling rates and greater complexity of the spectra as size increases. Segmental isotopic labeling allows for specific segment(s) within a protein to be selectively examined by NMR, thus significantly reducing the spectral complexity for large proteins and allowing for the application of a variety of solution-based NMR strategies. Two related approaches are generally used in the segmental isotopic labeling of proteins: expressed protein ligation and protein trans-splicing. Here, we describe the methodology and recent application of expressed protein ligation and protein trans-splicing for NMR structural studies of proteins and protein complexes. We also describe the protocol used in our lab for the segmental isotopic labeling of a 50-kDa protein Csk (C-terminal Src kinase) using expressed protein ligation methods.

Construction of a small-molecule-integrated semisynthetic split intein for in vivo protein ligation

A new split intein-based protein ligation tool that is synthetically accessible and can be used for protein semisynthesis on the cell surface and potentially inside cells has been constructed.

Semisynthetic Murine Prion Protein Equipped with a GPI Anchor Mimic Incorporates into Cellular Membranes

Conversion of cellular prion protein (PrP(C)) into the pathological conformer (PrP(Sc)) has been studied extensively by using recombinantly expressed PrP (rPrP). However, due to inherent difficulties of expressing and purifying posttranslationally modified rPrP variants, only a limited amount of data is available for membrane-associated PrP and its behavior in vitro and in vivo. Here, we present an alternative route to access lipidated mouse rPrP (rPrP(Palm)) via two semisynthetic strategies. These rPrP variants studied by a variety of in vitro methods exhibited a high affinity for liposomes and a lower tendency for aggregation than rPrP. In vivo studies demonstrated that double-lipidated rPrP is efficiently taken up into the membranes of mouse neuronal and human epithelial kidney cells. These latter results enable experiments on the cellular level to elucidate the mechanism and site of PrP-PrP(Sc) conversion.

Protein splicing in cis and in trans

Intein-mediated protein splicing is a self-catalytic process in which the intervening intein sequence is removed from a precursor protein and the flanking extein segments are ligated with a native peptide bond. Splice junction proximal residues and internal residues within the intein direct these reactions. The identity of these residues varies in each intein, as groups of related residues populate conserved motifs. Although the basics of the four-step protein splicing pathway are known, mechanistic details are still unknown. Structural and kinetic analyses are beginning to shed some light. Several structures were reported for precursor proteins with mutations in catalytic residues, which stabilize the precursors for crystallographic study. Progress is being made despite limitations inherent in using mutated precursors. However, no uniform mechanism has emerged. Kinetic parameters were determined using conditional trans-splicing (splicing of split precursor fragments after intein reassembly). Several groups concluded that the rate of the initial acyl rearrangement step is rapid and Asn cyclization (step 3) is slow, suggesting that this latter step is rate limiting. Understanding the protein splicing pathway has allowed scientists to harness inteins for numerous applications.

Reconstitution of modular PDK1 functions on trans-splicing of the regulatory PH and catalytic kinase domains

The serine-threonine protein kinases PDK1 and PKB each contain a pleckstrin homology (PH) domain that binds the membrane-bound phosphatidylinositol 3,4,5-triphosphate [PI(3,4,5)P3] second messenger and is required for PDK1-catalyzed phosphorylation and activation of PKB. While X-ray structures have been reported for the individual regulatory PH and catalytic kinase domain constructs of both PDK1 and PKB, diffraction quality crystals of full length constructs have yet to be obtained, likely due to conformational heterogeneity. In developing alternative approaches to understanding the potential role of conformational dynamics in regulating PKB phosphorylation by PDK1, an efficient in vitro method for protein trans-splicing was developed, which utilizes the N- and C-terminal split inteins of the gene dnaE from Nostoc punctiforme [(N)NpuDnaE] and Synechocystis sp. strain PCC6803 [(C)SspDnaE], respectively. For conjugating the regulatory PH domain to the catalytic kinase domain of PDK1, the recombinant trans-splicing fusion constructs KINASE(AEY)-(N)NpuDnaE-His6 and GST-His6-(C)SspDnaE-(CMN)PH were designed, PCR assembled, overexpressed, and affinity purified. The cross-reacting (N)NpuDnaE and (C)SspDnaE inteins generated full length spliced-PDK1 with kobs = (2.8 +/- 0.3) x 10(-5) s(-1) and with < or =5% of any competing trans-cleavage reactions. Spliced-PDK1 was efficiently purified to > or =95% homogeneity from the reaction mixture by subsequent His6 affinity and ion exchange chromatography steps. In vitro kinase assays and phosphopeptide mapping studies confirmed that spliced-PDK1 retained the ability to colocalize and selectively phosphorylate Thr-309 of PKBbeta in a PI(3,4,5)P3-dependent manner. The high-level production and reconstitution of functional spliced-PDK1 establishes the feasibility of incorporating domain-specific biophysical probes for spectroscopic studies of regulatory PH domain mediated catalytic specificity.

Functional analysis of the split Synechocystis DnaE intein in plant tissues by biolistic particle bombardment

The DnaE intein of Synechocystis sp. PCC6803 (Ssp DnaE intein) is the first split intein identified in nature. Its N-terminal fragment (Int-n) is attached to the end of the N-terminal half of the DnaE protein (DnaE-n) to form the precursor DnaE-n/Int-n, while the C-terminal fragment (Int-c) precedes the C-terminal half of the DnaE protein (DnaE-c) to form the precursor Int-c/DnaE-c. Int-n and Int-c fragments in the separate precursors catalyze, in concert, a protein trans-splicing process to splice the flanking DnaE-n and DnaE-c into a functional catalytic subunit of DNA polymerase III. They then release themselves from the precursors. Previously, the Ssp DnaE intein has been used to reconstitute a protein trans-splicing mechanism in stably transformed Arabidopsis thaliana, resulting in successful reassembly of an intact and functional GUS from two halves of a split GUS protein. In this report, transient expression using a biolistic particle bombardment approach is described for functional analysis of Ssp DnaE intein. Analyses confirmed that the Ssp DnaE intein could catalyze protein trans-splicing not only in model plants but also in monocot and dicot crops. It also demonstrated that when up to 45 amino acid residues were removed from the C-terminus of the Int-n fragment, the Int-n fragment was still able to function in the protein trans-splicing process.

Protein Trans-splicing and Characterization of a Split Family B-type DNA Polymerase from the Hyperthermophilic Archaeal Parasite Nanoarchaeum equitans

Nanoarchaeum equitans family B-type DNA polymerase (Neq DNA polymerase) is encoded by two separate genes, the large gene coding for the N-terminal part (Neq L) of Neq DNA polymerase and the small gene coding for the C-terminal part (Neq S), including a split mini-intein sequence. The two Neq DNA polymerase genes were cloned and expressed in Escherichia coli individually, together (for the Neq C), and as a genetically protein splicing-processed form (Neq P). The protein trans-spliced Neq C was obtained using the heating step at 80 degrees C after the co-expression of the two genes. The protein trans-splicing of the N-terminal and C-terminal parts of Neq DNA polymerase was examined in vitro using the purified Neq L and Neq S. The trans-splicing was influenced mainly by temperature, and occurred only at temperatures above 50 degrees C. The trans-splicing reaction was inhibited in the presence of zinc. Neq S has no catalytic activity and Neq L has lower 3'-->5' exonuclease activity; whereas Neq C and Neq P have polymerase and 3'-->5' exonuclease activities, indicating that both Neq L and Neq S are needed to form the active DNA polymerase that possesses higher proofreading activity. The genetically protein splicing-processed Neq P showed the same properties as the protein trans-spliced Neq C. Our results are the first evidence to show experimentally that natural protein trans-splicing occurs in an archaeal protein, a thermostable protein, and a family B-type DNA polymerase.

Protein semi-synthesis: New proteins for functional and structural studies

Our ability to alter and control the structure and function of biomolecules, and of proteins in particular, will be of utmost importance in order to understand their respective biological roles in complex systems such as living organisms. This challenge has prompted the development of powerful modern techniques in the fields of molecular biology, physical biochemistry and chemical biology. These fields complement each other and their successful combination has provided unique insights into protein structure and function at the level of isolated molecules, cells and organisms. Chemistry is without doubt most suited for introducing subtle changes into biomolecules down to the atomic level, but often struggles when it comes to large targets, such as proteins. In this review, we attempt to give an overview of modern and broadly applicable techniques that permit chemical synthesis to be applied to complex protein targets in order to gain control over their structure and function. As will be demonstrated, these approaches offer unique possibilities in our efforts to understand the molecular basis of protein functioning in vitro and in vivo. We will discuss modern synthetic reactions that can be applied to proteins and give examples of recent highlights. Another focus of this review will be the application of inteins as versatile protein engineering tools.

Crystal Structures of an Intein from the Split dnaE Gene of Synechocystis sp. PCC6803 Reveal the Catalytic Model Without the Penultimate Histidine and the Mechanism of Zinc Ion Inhibition of Protein Splicing

The first naturally occurring split intein was found in the dnaE gene of Synechocystis sp. PCC6803 and belongs to a subclass of inteins without a penultimate histidine residue. We describe two high-resolution crystal structures, one derived from an excised Ssp DnaE intein and the second from a splicing-deficient precursor protein. The X-ray structures indicate that His147 in the conserved block F activates the side-chain N(delta) atom of the intein C-terminal Asn159, leading to a nucleophilic attack on the peptide bond carbonyl carbon atom at the C-terminal splice site. In this process, Arg73 appears to stabilize the transition state by interacting with the carbonyl oxygen atom of the scissile bond. Arg73 also seems to substitute for the conserved penultimate histidine residue in the formation of an oxyanion hole, as previously identified in other inteins. The finding that the precursor structure contains a zinc ion chelating the highly conserved Cys160 and Asp140 reveals the structural basis of Zn2+-mediated inhibition of protein splicing. Furthermore, it is of interest to observe that the carbonyl carbon atom of Asn159 and N(eta) of Arg73 are 2.6 angstroms apart in the free intein structure and 10.6 angstroms apart in the precursor structure. The orientation change of the aromatic ring of Tyr-1 following the initial acyl shift may be a key switching event contributing to the alignment of Arg73 and the C-terminal scissile bond, and may explain the sequential reaction property of the Ssp DnaE intein.

A single catalytic domain of the junction-resolving enzyme T7 endonuclease I is a non-specific nicking endonuclease

A stable heterodimeric protein containing a single correctly folded catalytic domain (SCD) of T7 endonuclease I was produced by means of a trans-splicing intein system. As predicted by a model presented earlier, purified SCD protein acts a non-specific nicking endonuclease on normal linear DNA. The SCD retains some ability to recognize and cleave a deviated DNA double-helix near a nick or a strand-crossing site. Thus, we infer that the non-specific and nicked-site cleavage activities observed for the native T7 endonuclease I (as distinct from the resolution activity) are due to uncoordinated actions of the catalytic domains. The positively charged C-terminus of T7 Endo I is essential for the enzymatic activity of SCD, as it is for the native enzyme. We propose that the preference of the native enzyme for the resolution reaction is achieved by cooperativity in the binding of its two catalytic domains when presented with two of the arms across a four-way junction or cruciform structure.

A high-throughput screening of genes that encode proteins transported into the endoplasmic reticulum in mammalian cells

The compartments of eukaryotic cells maintain a distinct protein composition to perform a variety of specialized functions. We developed a new method for identifying the proteins that are transported to the endoplasmic reticulum (ER) in living mammalian cells. The principle is based on the reconstitution of two split fragments of enhanced green fluorescent protein (EGFP) by protein splicing with DnaE from Synechocystis PCC6803. Complementary DNA (cDNA) libraries fused to the N-terminal halves of DnaE and EGFP are introduced in mammalian cells with retroviruses. If an expressed protein is transported into the ER, the N-terminal half of EGFP meets its C-terminal half in the ER, and full-length EGFP is reconstituted by protein splicing. The fluorescent cells are isolated using fluorescence-activated cell sorting and the cDNAs are sequenced. The developed method was able to accurately identify cDNAs that encode proteins transported to the ER. We identified 27 novel proteins as the ER-targeting proteins. The present method overcomes the limitation of the previous GFP- or epitope-tagged methods, using which it was difficult to identify the ER-targeting proteins in a high-throughput manner.

Kinetic Analysis of the Individual Steps of Protein Splicing for the Pyrococcus abyssi PolII Intein

Protein splicing involves the excision of an intervening polypeptide, the intein, from flanking polypeptides, the exteins, concomitant with the specific ligation of the exteins. The intein that interrupts the DNA polymerase II DP2 subunit in Pyrococcus abyssi can be overexpressed and purified as an unspliced precursor, which allows for a detailed in vitro kinetic analysis of the individual steps of protein splicing. The first order rate constant for splicing of this intein, which has a non-canonical Gln at its C terminus, is 9.3 x 10(-6) s(-1) at 60 degrees C. The rate constant for splicing increases 3-fold with substitution of Asn for the C-terminal Gln. The pseudo first order rate constant of dithiothreitol-dependent N-terminal cleavage is 1 x 10(-4) s(-1). The first order rate constant of C-terminal cleavage is 1.2 x 10(-5) s(-1) with Gln at the C-terminal position, 2.8 x 10(-4) s(-1) with Asn, and decreases significantly with mutation of the penultimate His of the intein to Ala. N-terminal cleavage is most efficient between pH 7 and 7.5 and decreases at both more acidic and alkaline pH values, whereas C-terminal cleavage and splicing are both efficient over a broader range of pH values.

Protein splicing elements and plants: from transgene containment to protein purification

Protein splicing elements, termed inteins, have been discovered in all the domains of life. Basic research on inteins has led to a greater understanding of how they mediate the protein splicing process. Because inteins are natural protein engineering elements they have been harnessed for use in a number of applications, including protein purification, protein semisynthesis, and in vivo and in vitro protein modifications. This review focuses on the use of inteins in plants. A split-gene technique utilizes inteins to reconstitute the activity of a transgene product with the goal of limiting the spread of transgenes from a genetically modified plant to a weedy relative. Furthermore, merging the intein tag for protein purification with the large protein yields possible with plants has the potential to produce pharmaceutically important proteins. Finally, relevant techniques that may be used in plants in the future are discussed.

Synthetic Two-piece and Three-piece Split Inteins for Protein trans-Splicing

Inteins are protein-intervening sequences that can self-excise and concomitantly splice together the flanking polypeptides. Two-piece split inteins capable of protein trans-splicing have been found in nature and engineered in laboratories, but they all have a similar split site corresponding to the endonuclease domain of the intein. Can inteins be split at other sites and do trans-splicing? After testing 13 split sites engineered into a Ssp DnaB mini-intein, we report the finding of three new split sites that each produced a two-piece split intein capable of protein trans-splicing. These three functional split sites are located in different loop regions between beta-strands of the intein structure, and one of them is just 11 amino acids from the beginning of the intein. Because different inteins have similar structures and similar beta-strands, these new split sites may be generalized to other inteins. We have also demonstrated for the first time that a three-piece split intein could function in protein trans-splicing. These findings have implications for intein structure-function, evolution, and uses in biotechnology.

Semisynthesis of a segmental isotopically labeled protein splicing precursor: NMR evidence for an unusual peptide bond at the N-extein-intein junction

Protein splicing is a posttranslational autocatalytic process in which an intervening sequence, termed an intein, is removed from a host protein, the extein. Although we have a reasonable picture of the basic chemical steps in protein splicing, our knowledge of how these are catalyzed and regulated is less well developed. In the current study, a combination of NMR spectroscopy and segmental isotopic labeling has been used to study the structure of an active protein splicing precursor, corresponding to an N-extein fusion of the Mxe GyrA intein. The (1)J(NC') coupling constant for the (-1) scissile peptide bond at the N-extein-intein junction was found to be approximately 12 Hz, which indicates that this amide is highly polarized, perhaps because of nonplanarity. Additional mutagenesis and NMR studies indicate that conserved box B histidine residue is essential for catalysis of the first step of splicing and for maintaining the (-1) scissile bond in its unusual conformation. Overall, these studies support the "ground-state destabilization" model as part of the mechanism of catalysis.

Protein splicing of a Pyrococcus abyssi intein with a C-terminal glutamine

Protein splicing involves the excision of an intervening polypeptide sequence, the intein, from a precursor protein and the concomitant ligation of the flanking polypeptides, the exteins, by a peptide bond. Most reported inteins have a C-terminal asparagine residue, and it has been shown that cyclization of this residue is coupled to peptide bond cleavage between the intein and C-extein. We show that the intein interrupting the DNA polymerase II DP2 subunit in Pyrococcus abyssi, which has a C-terminal glutamine, is capable of facilitating protein splicing. Substitution of an asparagine for the C-terminal glutamine moderately improves the rate and extent of protein splicing. However, substitution of an alanine for the penultimate histidine residue, with either asparagine or glutamine in the C-terminal position, prevents protein splicing and facilitates cleavage at the intein N terminus. The intein facilitates in vitro protein splicing only at temperatures above 30 degrees C and can be purified as a nonspliced precursor. This temperature dependence has enabled us to characterize the optimal in vitro splicing conditions and determine the rate constants for splicing as a function of temperature.

Distribution of split DnaE inteins in cyanobacteria

Inteins are genetic elements found inside the coding regions of different host proteins and are translated in frame with them. The intein‐encoded protein region is removed by an autocatalytic protein‐splicing reaction that ligates the host protein flanks with a peptide bond. This reaction can also occur in trans with the intein and host protein split in two. After translation of the two genes, the two intein parts ligate their flanking protein parts to each other, producing the mature protein. Naturally split inteins are only known in the DNA polymerase III alpha subunit (polC or dnaE gene) of a few cyanobacteria. Analysing the phylogenetic distribution and probable genetic propagation mode of these split inteins, we conclude that they are genetically fixed in several large cyanobacterial lineages. To test our hypothesis, we sequenced parts of the dnaE genes from five diverse cyanobacteria and found all species to have the same type of split intein. Our results suggest the occurrence of a genetic rearrangement in the ancestor of a large division of cyanobacteria. This event fixed the dnaE gene in a unique two‐genes one‐protein configuration in the progenitor of many cyanobacteria. Our hypothesis, findings and the cloning procedure that we established allow the identification and acquisition of many naturally split inteins. Having a large and diverse repertoire of these unique inteins will enable studies of their distinct activity and enhance their use in biotechnology.

Intein-mediated assembly of a functional beta-glucuronidase in transgenic plants

The DnaE intein in Synechocystis sp. strain PCC6803 is the first and only naturally split intein that has been identified so far. It is capable of catalyzing a protein trans-splicing mechanism to assemble a mature protein from two separate precursors. Therefore, it is a powerful tool for protein modification and engineering. Inteins have not been identified, nor have intein-mediated protein splicing reactions been demonstrated, in plant cells. In this paper, we describe the use of the Ssp DnaE split intein in transgenic plants for reconstitution of a protein trans-splicing reaction. We have synthesized artificial genes that encode for N-terminal half (Int-n) and C-terminal half (Int-c) fragments of Ssp DnaE split intein and divided beta-glucuronidase (GUS) gene to encode GUS-n and GUS-c parts of the enzyme as reporter. The in-frame fusions of GUSn/Intn and Intc/GUSc were constructed and transfected into Arabidopsis. We have observed in vivo reassembly of functional beta-glucuronidase when both GUSn/Intn and Intc/GUSc constructs were introduced into the same Arabidopsis genome either by cotransformation or through genetic crossing, hereby signifying an intein-mediated protein trans-splicing mechanism reconstituted in plant cells.

Inteins: structure, function, and evolution

Inteins are genetic elements that disrupt the coding sequence of genes. However, in contrast to introns, inteins are transcribed and translated together with their host protein. Inteins appear most frequently in Archaea, but they are found in organisms belonging to all three domains of life and in viral and phage proteins. Most inteins consist of two domains: One is involved in autocatalytic splicing, and the other is an endonuclease that is important in the spread of inteins. This review focuses on the evolution and technical application of inteins and only briefly summarizes recent advances in the study of the catalytic activities and structures of inteins. In particular, this review considers inteins as selfish or parasitic genetic elements, a point of view that explains many otherwise puzzling aspects of inteins.

Noninvasive imaging of protein-protein interactions in living subjects by using reporter protein complementation and reconstitution strategies

In this study we have developed bioluminescence-imaging strategies to noninvasively and quantitatively image protein-protein interactions in living mice by using a cooled charge-coupled device camera and split reporter technology. We validate both complementation and intein-mediated reconstitution of split firefly luciferase proteins driven by the interaction of two strongly interacting proteins, MyoD and Id. We use transient transfection of cells and image MyoD-Id interaction after induction of gene expression in cell culture and in cells implanted into living mice. Techniques to study protein-protein interactions in living subjects will allow the study of cellular networks, including signal transduction pathways, as well as development and optimization of pharmaceuticals for modulating protein-protein interactions.

Construction of a mini-intein fusion system to allow both direct monitoring of soluble protein expression and rapid purification of target proteins

Affinity purification of recombinant proteins has been facilitated by fusion to a modified protein splicing element (intein). The fusion protein expression can be further improved by fusion to a mini-intein, i.e. an intein that lacks an endonuclease domain. We synthesized three mini-inteins using overlapping oligonucleotides to incorporate Escherichia coli optimized codons and allow convenient insertion of an affinity tag between the intein (predicted) N- and C-terminal fragments. After examining the splicing and cleavage activities of the synthesized mini-inteins, we chose the mini-intein most efficient in thiol-induced N-terminal cleavage for constructing a novel intein fusion system. In this system, green fluorescent protein (GFP) was fused to the C-terminus of the affinity-tagged mini-intein whose N-terminus was fused to a target protein. The design of the system allowed easy monitoring of soluble fusion protein expression by following GFP fluorescence, and rapid purification of the target protein through the intein-mediated cleavage reaction. A total of 17 target proteins were tested in this intein-GFP fusion system. Our data demonstrated that the fluorescence of the induced cells could be used to measure soluble expression of the intein fusion proteins and efficient intein cleavage activity. The final yield of the target proteins exhibited a linear relationship with whole cell fluorescence. The intein-GFP system may provide a simple route for monitoring real time soluble protein expression, predicting final product yields, and screening the expression of a large number of recombinant proteins for rapid purification in high throughput applications.

Intein-mediated ligation and cyclization of expressed proteins

Protein splicing is a posttranslational processing event that releases an internal protein sequence from a protein precursor. During the splicing process the internal protein sequence, termed an intein, embedded in the protein precursor self-catalyzes its excision and the ligation of the flanking protein regions, termed exteins. The dissection of the splicing pathway, which involves the precise cleavage and formation of peptide bonds, and the identification of key catalytic residues at the splice junctions have led to the modulation of the protein splicing process as a protein engineering tool. Novel strategies have been developed to use intein-catalyzed reactions for the production and manipulation of proteins and peptides. These new approaches have broken down the size limitation barrier of chemical synthetic methods and are less technically demanding. The purpose of this article is to describe how to use self-splicing inteins in protein semisynthesis and backbone cyclization. The first two sections of the article provide a brief review of the distinct chemical steps that underlie protein splicing and intein enabled technology.

Zinc inhibition of protein trans-splicing and identification of regions essential for splicing and association of a split intein*

Two important aspects of protein splicing were investigated by employing the trans-splicing intein from the dnaE gene of Synechocystis sp. PCC6803. First, we demonstrated that both protein splicing and cleavage at the N-terminal splice junction were inhibited in the presence of zinc ion. The trans-splicing reaction was partially blocked at a concentration of 1-10 microm Zn(2+) and completely inhibited at 100 microm Zn(2+); the inhibition by zinc was reversed in the presence of ethylenediaminetetraacetic acid. We propose that inactivation of Cys(160) at the C-terminal splice junction by the chelation of zinc affects both the N-S acyl rearrangement and the transesterification steps in the splicing pathway. Furthermore, in vivo and in vitro assays were established for the determination of intein residues and regions required for splicing or association between the N- and C-terminal intein halves. N-terminal truncation of the intein C-terminal segment inhibited both splicing and association activities, suggesting this region is crucial for the formation of an interface between the two intein halves. The replacement of conserved residues in blocks B and F with alanine abolished splicing but allowed for association. This is the first evidence showing that the conserved residues in block F are required for protein splicing.