Synthesis of chitosan-stabilized gold nanoparticles in the absence/presence of tripolyphosphate

Gold embedded chitosan nanoparticles with cell membrane mimetic polymer coating for pH-sensitive controlled drug release and cellular fluorescence imaging

In this work, gold embedded chitosan nanoparticles (Au@CS NPs) were fabricated by a one-pot method. The benzaldehyde-terminated poly[(2-methacryloyloxy) ethyl phosphorylcholine] (PMPC) was applied to modification of the gold doped chitosan nanoparticles. The obtained Au@CS-PMPC NPs had the diameter of 135 nm with a narrow distribution. The size of the Au@CS-PMPC NPs, as well as the size of the embedded gold NPs, might be well-controlled by adjusting the feeding ratio between chitosan and HAuCl₄. Furthermore, the Au@CS-PMPC NPs showed increased colloidal stability, high drug loading content, pH-responsive drug release, excellent biocompatibility and bright fluorescence emission. The results demonstrated that Au@CS-PMPC NPs showed a great potential for tumor therapy via the combination advantages of pH-sensitive controlled drug release and cellular fluorescence imaging.

Metal-dependent nano-catalysis in reduction of aromatic pollutants

Nanostructures have great potential in catalysis and their compositions may cause some interferences in the reactivity. Therefore, the present study focuses on comparison between three metallic nanoparticle-based Ag, Au, and Pd as nano-catalyst in reduction of aromatic pollutants. To neglect any interpenetration in their catalytic reactivity, the metallic nanoparticles were prepared via a consistent and reproducible one-step method with alkali-activated dextran. Interestingly, small sized/spherical AgNPs, AuNPs, and PdNPs were successively prepared with particle size of 3.4, 8.3, and 17.1 nm, respectively. The catalytic performance of the synthesized NPs was estimated for the reduction of p-nitroaniline and methyl red dye as different aromatic pollutants. Regardless of the particle size, there was a strong relation between catalytic action and the type of metal which followed the order of PdNP > AuNPs > AgNPs. Graphical Abstract.

An electrochemical sensor based on chitosan capped with gold nanoparticles combined with a voltammetric electronic tongue for quantitative aspirin detection in human physiological fluids and tablets

Inflammatory diseases increase has recently sparked the research interest for drugs diagnostic tools development. At therapeutic doses, acetylsalicylic acid (ASA or aspirin) is widely used for these diseases' treatment. ASA overdoses can however give rise to adverse side effects including ulcers, gastric damage. Hence, development of simple, portable and sensitive methods for ASA detection is desirable. This paper reports aspirin analysis in urine, saliva and pharmaceutical tablet using an electrochemical sensor and a voltammetric electronic tongue (VE-Tongue). The electrochemical sensor was fabricated by self-assembling chitosan capped with gold nanoparticles (Cs + AuNPs) on a screen-printed carbon electrode (SPCE). It exhibits a logarithmic-linear relationship between its response and the ASA concentration in the range between 1 pg/mL and 1 μg/mL. A low detection limit (0.03 pg/mL), good selectivity against phenol and benzoic acid interference, and successful practical application were demonstrated. Qualitative analysis was performed using the VE-Tongue based unmodified metal electrodes combined with two chemometric approaches to classify urine samples spiked with different aspirin concentrations. Partial least squares (PLS) method provided prediction models obtained from the data of both devices with a regression correlation coefficient R² = 0.99. Correspondingly, the SPCE/(Cs + AuNPs) electrochemical sensor and VE-Tongue could be viable tools for biological analysis of drugs.

Gold nanoparticles stabilized by PEG-tagged imidazolium salts as recyclable catalysts for the synthesis of propargylamines and the cycloisomerization of γ-alkynoic acids

Water-soluble gold nanoparticles prepared in the presence of PEG-tagged tris-imidazolium bromide, containing Au(0) and Au(i) species, are reusable catalysts.

Magnetic and light-responsive nanogels based on chitosan functionalized with Au nanoparticles and poly(N-isopropylacrylamide) as a remotely triggered drug carrier

Synthesis of thermosensitive nanogels based on functionalized chitosan with Au nanoparticles (NPs) and poly(NIPAM) to release of drug molecules under light exposure.

Gold Nanoparticles as Targeted Delivery Systems and Theranostic Agents in Cancer Therapy

Cancer is still a leading cause of death worldwide, while most chemotherapies induce nonselective toxicity and severe systemic side effects. To address these problems, targeted nanoscience is an emerging field that promises to benefit cancer patients. Gold nanoparticles are nowadays in the spotlight due to their many well-established advantages. Gold nanoparticles are easily synthesizable in various shapes and sizes by a continuously developing set of means, including chemical, physical or eco-friendly biological methods. This review presents gold nanoparticles as versatile therapeutic agents playing many roles, such as targeted delivery systems (anticancer agents, nucleic acids, biological proteins, vaccines), theranostics and agents in photothermal therapy. They have also been outlined to bring great contributions in the bioimaging field such as radiotherapy, magnetic resonance angiography and photoacoustic imaging. Nevertheless, gold nanoparticles are therapeutic agents demonstrating its in vitro anti-angiogenic, anti-proliferative and pro-apoptotic effects on various cell lines, such as human cervix, human breast, human lung, human prostate and murine melanoma cancer cells. In vivo studies have pointed out data regarding the bioaccumulation and cytotoxicity of gold nanoparticles, but it has been emphasized that size, dose, surface charge, sex and especially administration routes are very important variables.

Fabrication of gold-silver core-shell nanoparticles for performing as ultrabright SERS-nanotags inside human ovarian cancer cells

This paper presents the fabrication and characterization of new gold-silver core-shell nanoparticles labeled with para-mercaptobenzoic acid (4MBA) molecules and demonstrates their use as surface-enhanced Raman spectroscopy (SERS)-nanotags with ultra-bright traceability inside cells and ability to convey spectrally-coded information about the intracellular pH by means of SERS. Unlike previous reported studies, our fabrication procedure includes in the first step the synthesis of chitosan-coated gold nanoparticles as a seed material with subsequent growing of a silver shell. The bimetallic core-shell structure is revealed by transmission electron microscopy, high-angle annular dark field scanning transmission electron microscopy, energy-dispersive x-ray elemental mapping and the presence of two interacting localized surface plasmon resonance modes in UV-vis extinction spectrum. The high SERS activity and sensitivity of as fabricated 4MBA-chit-Au-AgNPs nano-constructs to different pH in solution is investigated under 532 and 633 nm laser lines excitation. Next, in view of future studies in cancer diagnosis, the in vitro antiproliferative effects of SERS-nanotags against human ovarian adenocarcinoma cells (NIH:OVCAR-3) are evaluated. The capacity to operate as bright SERS nanotags with precise localization at a single cell level as well as intracellular pH indicators is clearly demonstrated by performing cell imaging under scanning confocal Raman microscopy.

What Does Nanoparticle Stability Mean?

The term "nanoparticle stability" is widely used to describe the preservation of a particular nanostructure property ranging from aggregation, composition, crystallinity, shape, size, and surface chemistry. As a result, this catch-all term has various meanings, which depend on the specific nanoparticle property of interest and/or application. In this feature article, we provide an answer to the question, "What does nanoparticle stability mean?". Broadly speaking, the definition of nanoparticle stability depends on the targeted size dependent property that is exploited and can only exist for a finite period of time given all nanostructures are inherently thermodynamically and energetically unfavorable relative to bulk states. To answer this question specifically, however, the relationship between nanoparticle stability and the physical/chemical properties of metal/metal oxide nanoparticles are discussed. Specific definitions are explored in terms of aggregation state, core composition, shape, size, and surface chemistry. Next, mechanisms of promoting nanoparticle stability are defined and related to these same nanoparticle properties. Metrics involving both kinetics and thermodynamics are considered. Methods that provide quantitative metrics for measuring and modeling nanoparticle stability in terms of core composition, shape, size, and surface chemistry are outlined. The stability of solution-phase nanoparticles are also impacted by aggregation state. Thus, collision and DLVO theories are discussed. Finally, challenges and opportunities in understanding what nanoparticle stability means are addressed to facilitate further studies with this important class of materials.

The Role of Ligands in the Chemical Synthesis and Applications of Inorganic Nanoparticles

The design of nanoparticles is critical for their efficient use in many applications ranging from biomedicine to sensing and energy. While shape and size are responsible for the properties of the inorganic nanoparticle core, the choice of ligands is of utmost importance for the colloidal stability and function of the nanoparticles. Moreover, the selection of ligands employed in nanoparticle synthesis can determine their final size and shape. Ligands added after nanoparticle synthesis infer both new properties as well as provide enhanced colloidal stability. In this article, we provide a comprehensive review on the role of the ligands with respect to the nanoparticle morphology, stability, and function. We analyze the interaction of nanoparticle surface and ligands with different chemical groups, the types of bonding, the final dispersibility of ligand-coated nanoparticles in complex media, their reactivity, and their performance in biomedicine, photodetectors, photovoltaic devices, light-emitting devices, sensors, memory devices, thermoelectric applications, and catalysis.

Chitosan-capped gold nanoparticles for indicating temperature abuse in frozen stored products

The present study aimed to optimize the conditions for the synthesis of gold nanoparticles (AuNP) using chitosan and to assess its effectiveness as temperature threshold indication for frozen storage conditions. Chitosan concentration of 0.25% and temperature of 90 °C for 15 min was optimum for synthesizing AuNP. The maximum absorbance (λ_max) was observed at 530 and 540 nm for 0.125% and 0.25% chitosan, respectively, indicating shifting of peak toward longer wavelengths (red shift) with increasing chitosan concentration indicating larger AuNPs. A prominent absorption peak at 1367 cm⁻¹ by Fourier transform-infrared (FTIR) spectrum corresponding to C−C stretching of the glucosamine group of chitosan indicates the chitosan capping on the AuNP. Higher peak intensity and a peak shift toward shorter wavelength were observed for AuNPs exposed to frozen temperature abused conditions. Distinctly clear visible color variation from cherry red to gray indicates its application as temperature abuse indicator in frozen products.

Thermal history indicators (THI) attached on packages can tell us the storage temperature history of food and pharmaceutical products, which influences their quality and safety a lot. Metal nanoparticles are widely considered as THI. Mohan from ICAR-Central Institute of Fisheries Technology, India and coworkers reported a temperature abuse indictor based on chitosan capped gold nanoparticles. Chitosan was used as a reducing and stabilizing agent in the synthesis of gold nanoparticles. The final size of Au nanoparticles was determined by the used concentration of chitosan. The chitosan capped gold nanoparticles were capable of altering color and color intensity when exposed to temperature fluctuations. This can be attributed to the aggregation of the gold nanoparticles, alteration in shape and size at frozen temperature abused conditions.

A repertoire of biomedical applications of noble metal nanoparticles

The emerging properties of noble metal nanoparticles are attracting huge interest from the translational scientific community. In this feature article, we highlight recent advances in the adaptation of noble metal nanomaterials and their biomedical applications in therapeutics, diagnostics and sensing.

Green Synthesis of Chitosan-Silver/Gold Hybrid Nanoparticles for Biomedical Applications

Silver and gold nanoparticles (NPs) attract great attention nowadays because of their unique characteristics that entitle them for various biomedical applications. However, there is still a need for successful green synthesis methods for these two metal NPs, especially in a hybrid form, as well-established protocols. On the other hand, chitosan (Cs) is a polysaccharide of great promise for green synthesis of metal NPs, especially in the presence of some plant/fruit extracts. Together, Cs and the appropriate natural products in the extracts play the roles of both capping and reducing agents toward the green synthesis and stabilization of the silver/gold hybrid NPs. In this chapter, we introduce a well-established protocol for the green synthesis of Cs-Ag/Au hybrid NPs which could incorporate a therapeutic agent. In this approach, Cs plays the role of a carrier for the therapeutic agent, in addition to its capping/reducing contributions.

In situ synthesis, stabilization and activity of protein-modified gold nanoparticles for biological applications

We demonstrate an in situ synthesis, stabilization and activity of a nanoparticle-based protein carrier platform via the Layer-by-Layer (LbL) technology.

Antibacterial activity of biosynthesized gold nanoparticles using biomolecules from Lignosus rhinocerotis and chitosan

A simple, cost-effective, and environmentally friendly method is needed for synthesizing metal nanoparticles, including gold nanoparticles (AuNPs). In this study, AuNPs were synthesized with Lignosus rhinocerotis sclerotial extract (LRE) and chitosan (CS) as reducing and stabilizing agents, respectively. Different LRE concentrations from cold and hot water extraction (CWE and HWE, respectively) were used to reduce chloroauric acid (HAuCl₄) to form AuNPs. Positively charged chitosan stabilized AuNPs (CS-AuNPs) mediated by LRE exhibited a surface plasmon resonance (SPR) band at 533 nm. The CS-AuNPs synthesized using CWE had a smaller particle size (49.5 ± 6.7-82.4 ± 28.0 nm) compared to that of the HWE samples (80.3 ± 23.4-125.3 ± 41.5 nm), depending on LRE concentration. FTIR results suggested protein and polysaccharides in LRE were the sources of reducing power, reducing gold ions to AuNPs. CS-AuNPs were mostly spherical with higher LRE concentrations, whereas some triangular, pentagonal, irregular, and rod shaped AuNPs were observed at lower LRE concentrations. CS-AuNPs mediated by LRE displayed effective antibacterial activity against gram-negative (Pseudomonas aeruginosa and Escherichia coli) and gram-positive bacteria (Staphylococcus aureus and Bacillus sp.). Thus, the biosynthesized AuNPs using LRE and chitosan provide opportunities for developing stable and eco-friendly nanoparticles with effective antibacterial properties.

Optimization of chitosan nanoparticle synthesis and its potential application as germination elicitor of Oryza sativa L

The worldwide rice production has been dwindling due to biotic and abiotic causes. Chitosan is a proven biofunctional material that induces many biological responses in plants. However, the growth and yield increasing properties of chitosan nanoparticles (ChNP) on rice crop are not well understood. In the present work, effect of ChNP on germination of rice has been studied. Seed toxicity of ChNP was also analyzed to ensure the safety of ChNP application. The toxicity study was done according to EPA guidelines and ChNP was found to be non-toxic. Rice seeds were treated with ChNP at different concentrations for different time periods and kept for germination. Upon complete germination, the seedlings were sown in seed trays and growth was evaluated at 21 days after sowing. All treatments showed better results than the untreated control. Treatment T₂₂ (1 mg/ml ChNP for 120 mins) gave the highest growth rates. Therefore we could deduce that ability of ChNP to elicit growth was associated with the concentration of ChNP and soaking time. The shelf life of ChNP was studied over a period of one year by analyzing the germination eliciting capacity on rice seeds. ChNP was found to effective for seven months when stored under room temperature.

Biosynthesis and Potential Applications of Silver and Gold Nanoparticles and Their Chitosan-Based Nanocomposites in Nanomedicine

Biosynthesized or biogenic metallic nanoparticles, particularly silver and gold nanoparticles (AgNPs and AuNPs, respectively), have been increasingly used because of their advantages, including high stability and loading capacity; moreover, these nanoparticles are synthesized using a green and cost-effective method. Previous studies have investigated reducing and/or stabilizing agents from various biological sources, including plants, microorganisms, and marine-derived products, using either a one-pot or a multistep process at different conditions. In addition, extensive studies have been performed to determine the biological or pharmacological effects of these nanoparticles, such as antimicrobial, antitumor, anti-inflammatory, and antioxidant effects. In the recent years, chitosan, a natural cationic polysaccharide, has been increasingly investigated as a reducing and/or stabilizing agent in the synthesis of biogenic metallic nanoparticles with potential applications in nanomedicine. Here, we have reviewed the mechanism of biosynthesis and potential applications of AgNPs and AuNPs and their chitosan-mediated nanocomposites in nanomedicine.

One-Step Synthesis of Quadrilateral-Shaped Silver Nanoplates with Lamellar Structures Tuned by Amylopectin Derivatives

Polymers or small molecules with functional groups were always employed to synthesize two-dimensional (2D) silver nanostructures, but the polysaccharides and derivatives have rarely been used for their preparation, let alone of uniform quadrilateral shapes. Herein, amylopectin derivatives containing concentrated carboxyl groups were first used for the synthesis of uniform 2D quadrilateral silver nanoplates (QAgNPs) with lamellar structure. As a native hyperbranched polysaccharide, amylopectin was esterified with 10-undecenoyl chloride and then modified via thiol-ene click chemistry to introduce high amount and high density of carboxyl groups. Then, QAgNPs were synthesized via UV photoreduction in the presence of the resultant amylopectin 11-((3-carboxyl)ethylthio)undecanoate (APUE3-MPA) in water-tetrahydrofuran binary system. QAgNPs showed novel uniform quadrilateral shapes with lamellar structure, as verified by their wide-angle X-ray scattering patterns. The average interlayer distance was around 1.3 nm, whereas the average edge lengths of QAgNPs varied between 0.29 ± 0.07 and 1.09 ± 0.25 μm. The concentration of APUE3-MPA and the amount of water in the reaction system strongly affected the shapes of QAgNPs. Thus, the reaction system and the arrangement of numerous carboxyl groups were the key factors for the formation of lamellar-structured QAgNPs.

Shining Light on Chitosan: A Review on the Usage of Chitosan for Photonics and Nanomaterials Research

Chitosan (CS) is a natural polymer derived from chitin that has found its usage both in research and commercial applications due to its unique solubility and chemical and biological attributes. The biocompatibility and biodegradability of CS have helped researchers identify its utility in the delivery of therapeutic agents, tissue engineering, wound healing, and more. Industrial applications include cosmetic and personal care products, wastewater treatment, and corrosion protection, to name a few. Many researchers have published numerous reviews outlining the physical and chemical properties of CS, as well as its use for many of the above-mentioned applications. Recently, the cationic polyelectrolyte nature of CS was found to be advantageous for stabilizing fascinating photonic materials including plasmonic nanoparticles (e.g., gold and silver), semiconductor nanoparticles (e.g., zinc oxide, cadmium sulfide), fluorescent organic dyes (e.g., fluorescein isothiocyanate (FITC)), luminescent transitional and lanthanide complexes (e.g., Au(I) and Ru(II), and Eu(III)). These photonic systems have been extensively investigated for their usage in antimicrobial, wound healing, diagnostics, sensing, and imaging applications. Highlighted in this review are the different works involving some of the above-mentioned molecular-nano systems that are prepared or stabilized using the CS polymer. The advantages and the role of the CS for synthesizing and stabilizing the above-mentioned optically active materials have been illustrated.

In-situ generation of gold nanoparticles on MnO2 nanosheets for the enhanced oxidative degradation of basic dye (Methylene Blue)

In this work, the gold nanoparticles (Au-NPs) were in-situ generated on the surface of MnO₂ nanosheets to form MnO₂/Au-NPs nanocomposite in a simple and cost-effective way. Multiple experiments were carried out to optimize the oxidation of basic dye (Methylene Blue (MB)), including the molar ratio of MnO₂ to chloroauric acid (HAuCl₄), the pH of the solution and the effect of initial material. Under the optimal condition, the highest degradation efficiency for MB achieved to 98.9% within 60 min, which was obviously better than commercial MnO₂ powders (4.3%) and MnO₂ nanosheets (74.2%). The enhanced oxidative degradation might attribute to the in-situ generation of ultra-small and highly-dispersed Au-NPs which enlarged the synergistic effect and/or interfacial effect between MnO₂ nanosheets and Au-NPs and facilitated the uptake of electrons by MnO₂ from MB during the oxidation, thus validating the application of MnO₂/Au-NPs nanocomposite for direct removal of organic dyes from wastewater in a simple and convenient fashion.

Novel composite films of polysaccharides and glutathione capped zinc selenide (GSH@ZnSe) quantum dots for detection of Cd2+ and Cu2+

Water-soluble glutathione capped zinc selenide (GSH@ZnSe) quantum dots (QDs) were employed to develop composite films with positively charged chitosan (CS) and negatively charged xanthan gum (XG), respectively.

DEAE-Dextran coated paclitaxel nanoparticles act as multifunctional nano system for intranuclear delivery to triple negative breast cancer through VEGF and NOTCH1 inhibition

Triple negative breast cancer revolution has identified a plethora of therapeutic targets making it apparent that a single target for its treatment could be rare hence creating an urge to develop robust technologies for combination drug therapy. Paclitaxel, hailed as the most significant advancement in chemotherapy faces several underpinnings due to its low solubility and permeability. Advancing research has demonstrated the role of interferons in cancer. DEAE-Dextran, an emerging molecule with evidence of interferon induction was utilized in the present study to develop a nanoformulation in conjugation with paclitaxel to target multiple therapeutic pathways, with diminution of paclitaxel adverse effects and develop a specific targeted nano system. Evidently, it was demonstrated that DEAE-Dextran coated nanoformulation portrays significant synergistic cytotoxicity in the various cell lines. Moreover, overcoming the activation of ROS by paclitaxel, the combination drug therapy more effectively inhibited ROS through β-interferon induction. The nanoformulation was further conjugated to FITC for internalization studies which subsequently indicated maximum cellular uptake at 60min post treatment demonstrated by green fluorescence from FITC lighting up the nuclear membrane. Precisely, the mechanistic approach of nuclear-targeted nanoformulation was evaluated by in vivo xenograft studies which showed a synergistic release of β-interferon at the target organ. Moreover, the combination nanoformulation inculcated multiple mechanistic approaches through VEGF and NOTCH1 inhibition along with dual β and γ-interferon overexpression. Overall, the combination therapy may be a promising multifunctional nanomaterial for intranuclear drug delivery in TNBC.

Chitosan stabilized gold nanoparticle mediated self-assembled gliP nanobiosensor for diagnosis of Invasive Aspergillosis

Diagnosis of Invasive Aspergillosis (IA) casused by Aspergillus fumigatus in miniaturized setting is challenging with great importance in human health. In this direction, we have designed a sensitive electrochemical nanobiosensor for diagnosis of IA through detecting the virulent glip target gene (glip-T) in a miniaturized experimetal setting. The sensor probe was fabricated using 1,6-Hexanedithiol and chitosan stabilized gold nanoparticle mediated self-assembly of glip probes (glip-P) on gold electrode. It was characterized by UV-visible spectroscopy, cyclic voltametry and electrochemical impedance spectroscopy. The ability of sensor to detect glip-T was analysed based on the hybridyzation reaction and the signal obtained using toluidine blue as indicator molecule. Analytical parameters were optimized in terms of glip-P concentration, temperature, reaction time, and concentration of toluidine blue. The biosensor showed the dynamic range between 1 × 10^-14- 1 × 10^-2 M with the detection limit of 0.32 ± 0.01 × 10^-14(RSD < 5.2%). The regeneration of biosensor was evaluated and the interference due to non-target oligonucleotide sequences was evaluated individualy as well as in mixed sample to validate the high selectivity of the designed sensor. The stability of the designed sensor was examined and practical applicability of biosensor was tested by detecting glip-T in real sample environment.