Temperature-Controlled Properties of DNA Complexes with Poly(ethylenimine)-graft-poly(N-isopropylacrylamide)

Cellular uptake of densely packed polymer coatings on gold nanoparticles

A variety of functional polymer chains prepared by RAFT were directly grafted onto 5, 10, and 20 nm gold nanoparticles (AuNPs). The polymer shell coating the AuNPs was densely packed because of the strong binding between the trithioester groups on the polymer chain-ends and gold. It was found that due to the densely packed nature of the shell the polymer chains were significantly stretched compared to their usual Gaussian coil conformation in water. This was even evident for polymer chains where ionic repulsion between neighboring chains should be significant. Therefore, with such high grafting densities the surface properties and size of the hybrid nanoparticles should be the only contributing factors in cellular uptake in epithelial Caco-2 cells. This study has provided valuable insight into the effects of charge and size of NPs for the application of NPs in the delivery of therapeutic agents across the intestine. Our results showed that the negatively charged AuNPs were taken up by the cells with greater efficiency than the neutral AuNPs, most probably due to binding with membrane proteins. The positively charged AuNPs as expected gave the greatest uptake efficiency. Interestingly, the uptake for PNIPAM-AuNPs (hydrophobic coating at 37 degrees C) increased from approximately 2% efficiency after a 30 min incubation to 8% after 2 h, and was much greater than the negative or neutral AuNPs. We believe that this was due to the interplay between the hydrophobic nature of the NPs and their increased size.

Hyperthermia-induced targeting of thermosensitive gene carriers to tumors

Locoregional hyperthermia (HT) can be used for site-directed activation of macromolecular drug delivery systems. We have developed a gene delivery system based on thermosensitive block copolymers (TSCs) with a phase transition temperature of 42 degrees C [Zintchenko, A., Ogris, M., and Wagner, E. (2006). Bioconjug. Chem. 17, 766-772], in which the statistical copolymer of vinylpyrrolidinone and N-isopropylacryamide is grafted on polyethylenimine (PEI). Here we applied polyplexes consisting of plasmid DNA and TSCs systemically in A/J mice bearing a syngeneic Neuro2A neuroblastoma tumor subcutaneously in each hind limb. One limb was selectively treated by HT at 42 degrees C, at the same time that polyplexes were injected via the tail vein. Hyperthermia led to increased accumulation of thermosensitive polymer and aggregation of thermosensitive polyplexes in HT-treated tumors, resulting in up to 10-fold increased DNA deposition compared with non-HT-treated tumor. The level of transgene expression induced by TSC polyplexes in HT-treated tumors was significantly higher and selective for tumor tissue. With nonthermosensitive PEI polyplexes HT did not influence transgene deposition or expression in tumor.

Balancing protection and release of DNA: tools to address a bottleneck of non-viral gene delivery

Engineering polymeric gene-delivery vectors to release an intact DNA payload at the optimal time and subcellular compartment remains a formidable challenge. An ideal vector would provide total protection of complexed DNA from degradation prior to releasing it efficiently near or within the nucleus of a target cell. While optimization of polymer properties, such as molecular weight and charge density, has proved largely inadequate in addressing this challenge, applying polymeric carriers that respond to temperature, light, pH and redox environment to trigger a switch from a tight, protective complex to a more relaxed interaction favouring release at the appropriate time and place has shown promise. Currently, a paucity of gene carriers able to satisfy the contrary requirements of adequate DNA protection and efficient release contributes to the slow progression of non-viral gene therapy towards clinical translation. This review highlights the promising carrier designs that may achieve an optimal balance of DNA protection and release. It also discusses the imaging techniques and three-dimensional in vitro models that can help study these two barriers in the non-viral gene transfer process. Ultimately, efficacious non-viral gene therapy will depend on the combination of intelligent material design, innovative imaging techniques and sophisticated in vitro model systems to facilitate the rational design of polymeric gene-delivery vectors.

Facile synthesis of multivalent folate-block copolymer conjugates via aqueous RAFT polymerization: targeted delivery of siRNA and subsequent gene suppression

Cell specific delivery of small interfering ribonucleic acid (siRNA) using well-defined multivalent folate-conjugated block copolymers is reported. Primary amine functional, biocompatible, hydrophilic-block-cationic copolymers were synthesized via aqueous reversible addition-fragmentation chain transfer (RAFT) polymerization. N-(2-hydroxypropyl)methacrylamide) (HPMA), a permanently hydrophilic monomer, was copolymerized with a primary amine containing monomer, N-(3-aminopropyl)methacrylamide (APMA). Poly(HPMA) confers biocompatibility, while APMA provides amine functionality, allowing conjugation of folate derivatives. HPMA-stat-APMA was chain extended with a cationic block, poly(N-[3-(dimethylamino)propyl]methacrylamide), to promote electrostatic complexation between the copolymer and the negatively charged phosphate backbone of siRNA. Notably, poly(HPMA) stabilizes the neutral complexes in aqueous solution, while APMA allows the conjugation of a targeting moiety, thus, dually circumventing problems associated with the delivery of genes via cationically charged complexes (universal transfection). Fluorescence microscopy and gene down-regulation studies indicate that these neutral complexes can be specifically delivered to cancer cells that overexpress folate receptors.

Star-shaped cationic polymers by atom transfer radical polymerization from beta-cyclodextrin cores for nonviral gene delivery

Cationic polymers with low cytotoxicity and high transfection efficiency have attracted considerable attention as nonviral carriers for gene delivery. Herein, well-defined and star-shaped CDPD consisting of beta-CD cores and P(DMAEMA) arms, and CDPDPE consisting of CDPD and P(PEGEEMA) end blocks (where CD = cyclodextrin, P(DMAEMA) = poly(2-(dimethylamino)ethyl methacrylate), P(PEGEEMA) = poly(poly(ethylene glycol)ethyl ether methacrylate)) for gene delivery were prepared via atom transfer radical polymerization (ATRP) from the bromoisobutyryl-terminated beta-CD core. The CDPD and CDPDPE exhibit good ability to condense plasmid DNA (pDNA) into 100-200 nm size nanoparticles with positive zeta potentials of 25-40 mV at nitrogen/phosphate (N/P) ratios of 10 or higher. CDPD and CDPDPE exhibit much lower cytotoxicity and higher gene transfection efficiency than high molecular weight P(DMAEMA) homopolymers. A comparison of the transfection efficiencies between CDPD and P(DMAEMA) homopolymer indicates that the unique star-shaped architecture involving the CD core can enhance the gene transfection efficiency. In addition to reducing cytotoxicity, the introduction of a biocompatible P(PEGEEMA) end block to the P(DMAEMA) arms in CDPDPE can further enhance the gene transfection efficiency.

Complex coacervate core micelles

In this review we present an overview of the literature on the co-assembly of neutral-ionic block, graft, and random copolymers with oppositely charged species in aqueous solution. Oppositely charged species include synthetic (co)polymers of various architectures, biopolymers - such as proteins, enzymes and DNA - multivalent ions, metallic nanoparticles, low molecular weight surfactants, polyelectrolyte block copolymer micelles, metallo-supramolecular polymers, equilibrium polymers, etcetera. The resultant structures are termed complex coacervate core/polyion complex/block ionomer complex/interpolyelectrolyte complex micelles (or vesicles); i.e., in short C3Ms (or C3Vs) and PIC, BIC or IPEC micelles (and vesicles). Formation, structure, dynamics, properties, and function will be discussed. We focus on experimental work; theory and modelling will not be discussed. Recent developments in applications and micelles with heterogeneous coronas are emphasized.

In vivo non-invasive optical imaging of temperature-sensitive co-polymeric nanohydrogel

Assessment of hyperthermia in pathological tissue is a promising strategy for earlier diagnosis of malignant tumors. In this study, temperature-sensitive co-polymeric nanohydrogel poly(N-isopropylacrylamide-co-acrylic acid) (PNIPA-co-AA) was successfully synthesized by the precipitation polymerization method. The diameters of nanohydrogels were controlled to be less than 100 nm. Also the lower critical solution temperature (LCST, 40 °C) was manipulated above physiological temperature after integration of near-infrared (NIR) organic dye (heptamethine cyanine dye, HMCD) within its interior cores. NIR laser light (765 nm), together with sensitive charge coupled device (CCD) cameras, were designed to construct an NIR imaging system. The dynamic behaviors of PNIPA-co-AA-HMCD composites in denuded mice with or without local hyperthermia treatment were real-time monitored by an NIR imager. The results showed that the PNIPA-co-AA-HMCD composites accumulated in the leg treated with local heating and diffused much slower than that in the other leg without heating. The results demonstrated that the temperature-responsive PNIPA-co-AA-HMCD composites combining with an NIR imaging system could be an effective temperature mapping technique, which provides a promising prospect for earlier tumor diagnosis and thermally related therapeutic assessment.

Intelligent biosynthetic nanobiomaterials (IBNs) for hyperthermic gene delivery

PURPOSE

Intelligent biosynthetic nanobiomaterials (IBNs) were constructed as recombinant diblock copolymers, notated as K8-ELP(1-60), containing a cationic oligolysine (VGK8G) and a thermosensitive elastin-like polypeptide (ELP) block with 60 repetitive pentapeptide units [(VPGXG)60; X is Val, Ala and Gly in a 5:2:3 ratio].

METHODS

K8-ELP(1-60) was synthesized by recursive directional ligation for DNA oligomerization. Purity and molecular weight of K8-ELP(1-60) were confirmed by SDS-PAGE and mass spectrometry. DNA polyplexes were prepared from K8-ELP(1-60) and pGL3-Control (pGL3-C) plasmid DNA (pDNA) and stability was evaluated by gel retardation, DLS, and DNA displacement with heparin. Thermal transition profiles were studied by measuring the turbidity change at 350 nm and the polyplexes were used to transfect MCF-7 cells with a concomitant cytotoxicity assay.

RESULTS

SDS-PAGE and MALDI-TOF studies showed highly pure copolymers at the desired molecular weight. K8-ELP(1-60) condensed pDNA at a cation to anion (N/P) ratio above 0.25 with a tight distribution of particle size ranging from 115.5-32.4 nm with increasing N/P ratio. Thermal transition temperatures of K8-ELP(1-60)/pDNA and K8-ELP(1-60) alone were 44.9 and 71.5 degrees C, respectively. K8-ELP(1-60)/pDNA complexes successfully transduced MCF-7 cells with qualitative expression of enhanced green fluorescent protein (EGFP) and minimal cytotoxicity compared to branched poly(ethyleneimine) controls.

CONCLUSIONS

K8-ELP(1-60) was successfully designed and purified through recombinant means with efficient and stable condensation of pDNA at N/P ratios>0.25 and polyplex particle size<115 nm. MCF-7 cells successfully expressed EGFP with minimal cytotoxicity compared to positive controls; moreover, polyplexes retained sharp, thermotransitive kinetics within a narrow Tt range at clinically relevant hyperthermic temperatures, where the decrease of Tt was due to the increased hydrophobicity upon charge neutralization.

Varying polymer architecture to deliver drugs

Variable architecture polymers are of considerable interest for the delivery of therapeutic biopolymers, such as DNA and proteins, to their site of action. Polymers that can respond with a change in conformation to biologically relevant stimuli, such as temperature and pH, are being carefully designed to take advantage of the change in environmental conditions the polymer-drug conjugate encounters upon progression from larger-scale systems in the body to subcellular compartments. Viruses respond to changes in the cellular environment to gain access to their desired region of cells, and much can be learned from the mechanisms they employ in this effort. However, despite the efficiency of therapeutic biopolymers, undesirable immune and inflammatory responses may result from their repeated administration, so synthetic polymers are an attractive alternative. This mini-review examines a range of recently developed variable architecture polymers, mainly focusing on polymers responsive to temperature and pH, covering both synthetic copolymers and derivatives of naturally occurring polymers for advanced drug delivery applications. The polymers discussed in the article have some of the properties that are most important for polymer drug delivery vehicles to be effective, such as biodegradability, specificity, and biocompatibility.

Synthesis and characterization of variable-architecture thermosensitive polymers for complexation with DNA

Copolymers of N-isopropylacrylamide with a fluorescent probe monomer were grafted to branched poly(ethyleneimine) to generate polycations that exhibited lower critical solution temperature (LCST) behavior. The structures of these polymers were confirmed by spectroscopy, and their phase transitions before and after complexation with DNA were followed using ultraviolet and fluorescence spectroscopy and light scattering. Interactions with DNA were investigated by ethidium bromide displacement assays, while temperature-induced changes in structure of both polymers and polymer-DNA complexes were evaluated by fluorescence spectroscopy, dynamic light scattering, laser Doppler anemometry, and atomic force microscopy (AFM) in water and buffer solutions. The results showed that changes in polymer architecture were mirrored by variations in the architectures of the complexes and that the overall effect of the temperature-mediated changes was dependent on the graft polymer architecture and content, as well as the solvent medium, concentrations, and stoichiometries of the complexes. Furthermore, AFM indicated subtle changes in polymer-DNA complexes at the microstructural level that could not be detected by light scattering techniques. Uniquely, variable-temperature aqueous-phase AFM was able to show that changes in the structures of these complexes were not uniform across a population of polymer-DNA condensates, with isolated complexes compacting above LCST even though the sample as a whole showed a tendency for aggregation of complexes above LCST over time. These results indicate that sample heterogeneities can be accentuated in responsive polymer--DNA complexes through LCST-mediated changes--a factor that is likely to be important in cellular uptake and nucleic acid transport.

Enhanced gene expression through temperature profile-induced variations in molecular architecture of thermoresponsive polymer vectors

BACKGROUND

Successful non-viral gene targeting requires vectors to meet two conflicting needs-strong binding to protect the genetic material during transit and weak binding at the target site to enable release. Responsive polymers could fulfil such requirements through the switching of states, e.g. the chain-extended coil to chain-collapsed globule phase transition that occurs at a lower critical solution temperature (LCST), in order to transport nucleic acid in one polymer state and release it in another.

METHODS

The ability of new synthetic polycations based on poly(ethyleneimine) (PEI) with grafted neutral responsive poly(N-isopropylacrylamide) (PNIPAm) chains to condense DNA into particles with architectures varying according to graft polymer LCST was assessed using a combination of fluorescence spectroscopy, dynamic light scattering (DLS), zeta sizing, gel retardation and atomic force microscopy studies. Transfection assays were conducted under experimental conditions wherein the polymer components were able to cycle across their LCST.

RESULTS

Two PEI-PNIPAm conjugate polymers with different LCSTs displayed coil-globule transitions when complexed to plasmid DNA, leading to variations in molecular architecture as shown by changes in emission maxima of an environment-sensitive fluorophore attached to the PNIPAm chains. Gel retardation assays demonstrated differences in electrophoretic mobilities of polymer-DNA complexes with temperatures below and above polymer LCSTs. Atomic force micrographs showed changes in the structures of polymer-DNA complexes for a polymer undergoing a phase transition around body temperature but not for the polymer with LCST outside this range. Transfection experiments in C2C12 and COS-7 cells demonstrated that the highest expression of transgene occurred in an assay that involved a 'cold-shock' below polymer LCST during transfection.

CONCLUSIONS

Designed changes in thermoresponsive polycation vector configuration via temperature-induced phase transitions enhanced transgene expression. The results indicate that changes in molecular architecture induced by a carefully chosen stimulus during intracellular trafficking can be used to enhance gene delivery.

Effect of Polycation Length on Its Complexation with DNA and with Poly(oxyethylene-block-sodium methacrylate)

Polyelectrolyte complexes of a synthetic polycation with either a genomic DNA or a synthetic poly(oxyethylene-block-sodium methacrylate), POE-b-PMANa, have been studied in aqueous solutions as a function of cation:anion ratio, the degree of polymerization of the polycation, the ionic strength, and temperature using dynamic light scattering and turbidity measurements. The polycation was a copolymer of methacryl oxyethyl trimethylammonium chloride and poly(oxyethylene) monomethyl ether monomethacrylate with 4-5 oxyethylene repeating units, PMOTAC-g-POE. The molar masses of the polycations in a homological series were 0.3, 0.9, and 2.1 x 10(6) g/ mol. The amount of comonomers with poly(oxyethylene) tails in the copolymers was 15 mol %. The molar mass of the POE-b-PMANa was 75000 g/mol and that of the POE-block was 5000 g/mol. The molar mass of the polycation was shown to have a dramatic effect on the stability and size of the complexes formed by either of the polyanions. An increase in the polycation molar mass shifts the cloud point toward the lower polycation content in the complexes, and a macro phase separation occurs in the solutions with the cation to anion molar ratios much below than 1:1. Increasing the ionic strength has a similar effect. Further addition of salt to turbid and phase-separated solutions results in dissociation of the complexes, and the polyions dissolve as individual macromolecules. The effect of POE on the stability of polyelectrolyte complexes is discussed as well.

Living Radical Polymerization by the RAFT Process—A First Update

This paper provides a first update to the review of living radical polymerization achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of Reversible Addition–Fragmentation chain Transfer (RAFT) published in June 2005. The time since that publication has witnessed an increased rate of publication on the topic with the appearance of well over 200 papers covering various aspects of RAFT polymerization ranging over reagent synthesis and properties, kinetics, and mechanism of polymerization, novel polymer syntheses, and diverse applications.