Mussel-inspired immobilization of vascular endothelial growth factor (VEGF) for enhanced endothelialization of vascular grafts

An oxygen plasma treated poly(dimethylsiloxane) bioscaffold coated with polydopamine for stem cell therapy

In this study, 3D macroporous bioscaffolds were developed from poly(dimethylsiloxane) (PDMS) which is inert, biocompatible, non-biodegradable, retrievable and easily manufactured at low cost. PDMS bioscaffolds were synthesized using a solvent casting and particulate leaching (SCPL) technique and exhibited a macroporous interconnected architecture with 86 ± 3% porosity and 300 ± 100 µm pore size. As PDMS intrinsically has a hydrophobic surface, mainly due to the existence of methyl groups, its surface was modified by oxygen plasma treatment which, in turn, enabled us to apply a novel polydopamine coating onto the surface of the bioscaffold. The addition of a polydopamine coating to bioscaffolds was confirmed using composition analysis. Characterization of oxygen plasma treated-PDMS bioscaffolds coated with polydopamine (polydopamine coated-PDMS bioscaffolds) showed the presence of hydroxyl and secondary amines on their surface which resulted in a significant decrease in water contact angle when compared to uncoated-PDMS bioscaffolds (35 ± 3%, P < 0.05). Seeding adipose tissue-derived mesenchymal stem cells (AD-MSCs) into polydopamine coated-PDMS bioscaffolds resulted in cells demonstrating a 70 ± 6% increase in viability and 40 ± 5% increase in proliferation when compared to AD-MSCs seeded into uncoated-PDMS bioscaffolds (P < 0.05). In summary, this two-step method of oxygen plasma treatment followed by polydopamine coating improves the biocompatibility of PDMS bioscaffolds and only requires the use of simple reagents and mild reaction conditions. Hence, our novel polydopamine coated-PDMS bioscaffolds can represent an efficient and low-cost bioscaffold platform to support MSC therapies.

The effects of biomimetically conjugated VEGF on osteogenesis and angiogenesis of MSCs (human and rat) and HUVECs co-culture models

The purpose of this work was to investigate if the biomimetically conjugated VEGF and HUVECs co-culture could modulate the osteogenic and angiogenic differentiation of MSCs derived from rat and human bone marrow (rMSCs and hMSCs). After treated by ammonia plasma, Poly(lactic-co-glycolic acid) (PLGA) electrospun nanofibers were immobilized with VEGF through heparin to fulfil the sustained release. The proliferation capacity of rMSCs and hMSCs on neat PLGA nanofibers (NF) and VEGF immobilized NF (NF-VEGF) surfaces were assessed by CCK-8 and compared when MSCs were mono-cultured and co-cultured with HUVECs. The effect of VEGF and HUVECs co-culturing on osteogenic and angiogenic differentiation of rMSCs and hMSCs were investigated by calcium deposits and CD31 expression on NF and NF-VEGF surfaces. The results indicated that VEGF has been biomimetically immobilized onto PLGA nanofibers surface and kept sustained release successfully. The CD31 staining results showed that both VEGF and HUVECs co-culture could enhance the angiogenesis of rMSCs and hMSCs. However, the proliferation and osteogenic differentiation of MSCs when cultured with VEGF and HUVECs showed a species dependent response. Taken together, VEGF immobilization and co-culture with HUVECs promoted angiogenesis of MSCs, indicating a good strategy for vascularization in bone tissue engineering.

Recent progress in the biomedical applications of polydopamine nanostructures

Polydopamine is a dark brown-black insoluble biopolymer produced by autoxidation of dopamine. Although its structure and polymerization mechanism have not been fully understood, there has been a rapid growth in the synthesis and applications of polydopamine nanostructures in biomedical fields such as drug delivery, photothermal therapy, bone and tissue engineering, and cell adhesion and patterning, as well as antimicrobial applications. This article is dedicated to reviewing some of the recent polydopamine developments in these biomedical fields. Firstly, the polymerization mechanism is introduced with a discussion of the factors that influence the polymerization process. The discussion is followed by the introduction of various forms of polydopamine nanostructures and their recent applications in biomedical fields, especially in drug delivery. Finally, the review is summarized followed by brief comments on the future prospects of polydopamine.

A silk-based coating containing GREDVY peptide and heparin on Mg-Zn-Y-Nd alloy: improved corrosion resistance, hemocompatibility and endothelialization

Magnesium (Mg) alloys have been intensively investigated as potential absorbable coronary stent materials as their use avoids risks such as late inflammation and restenosis generated by permanent metallic implants. Besides that, clinical trials on coronary stents fabricated from Mg alloys have made great progress recently. However, the over-rapid corrosion rate, magnesium corrosion-induced thrombosis formation and delayed endothelium regeneration continue to be problematic for coronary artery stent therapy. In this study, silk fibroin blended with heparin and GREDVY (Gly-Arg-Glu-Asp-Val-Tyr) peptide was immobilized on a HF-pretreated MgZnYNd alloy surface via a polydopamine layer to improve its corrosion resistance, blood compatibility and endothelialization. Standard electrochemical measurements along with the long-term immersion results indicated that the functionalized MgZnYNd alloy had preferable anti-corrosion abilities compared with the bare MgZnYNd alloy. The modified surface exhibited outstanding hemocompatibility with reduced platelet adhesion, hemolysis rate and prolonged blood coagulation time. Human umbilical vein endothelial cell (HUVEC) and vascular smooth muscle cell (VSMC) co-culture results revealed more attached HUVECs on the functionalized samples than on the MgZnYNd alloy surfaces. The excellent corrosion retardation, hemocompatibility and re-endothelialization of the multi-functional coating indicate a promising method in the field of biodegradable magnesium-based implantable cardiovascular stents.

Recombinant human BMP-7 grafted poly(lactide-co-glycolide)/hydroxyapatite scaffolds via polydopamine for enhanced calvarial repair

Polydopamine-assisted rhBMP-7 immobilization on PLGA/hydroxyapatite scaffold via phase inversion for enhanced calvarial repair in vivo.

Prevention of polydimethylsiloxane microsphere migration using a mussel-inspired polydopamine coating for potential application in injection therapy

The use of injectable bulking agents is a feasible alternative procedure for conventional surgical therapy. In this study, poly(dimethylsiloxane) (PDMS) microspheres coated with polydopamine (PDA) were developed as a potential injection agent to prevent migration in vocal fold. Uniform PDMS microspheres are fabricated using a simple fluidic device and then coated with PDA. Cell attachment test reveals that the PDA-coated PDMS (PDA-PDMS) substrate favors cell adhesion and attachment. The injected PDA-PDMS microspheres persist without migration on reconstructed axial CT images, whereas, pristine PDMS locally migrates over a period of 12 weeks. The gross appearance of the implants retrieved at 4, 8, 12 and 34 weeks indicates that the PDA-PDMS group maintained their original position without significant migration until 34 weeks after injection. By contrast, there is diffuse local migration of the pristine PDMS group from 4 weeks after injection. The PDA-coated PDMS microspheres can potentially be used as easily injectable, non-absorbable filler without migration.

Improved Antithrombotic Function of Oriented Endothelial Cell Monolayer on Microgrooves

Achievement of an endothelial cell (EC) monolayer (re-endothelialization) on the vascular implant surface with competent and functioning features is critical for long-term safety after implantation. Oriented EC monolayer is beneficial to improve endothelial function such as enhanced athero-resistant property. However, the information about antithrombotic property of oriented EC monolayer is limited. Here, we used the microgrooved polydimethylsiloxane substrates to guide EC orientation and obtain oriented EC monolayer. The effects of anisotropic topography on EC behaviors and antithrombotic function of the EC monolayer were then evaluated. Our data demonstrated that ECs responded to grooves in a size-dependent way as shown in oriented cell cytoskeleton and nuclei, enhanced directed migration, and overall velocity. Furthermore, compared to the EC monolayer on the flat surface, the oriented EC monolayer formed on the grooved substrates exhibited improved antithrombotic capability as indicated by higher expression of functional related genes, production of prostacyclin and tissue plasminogen activator, and prolonged activated coagulation time. The improvement of antithrombotic function was especially notable on the smaller-size groove. These findings reveal the responses of ECs to varisized topography and antithrombotic function of the oriented EC monolayer, providing insights into optimal design of vascular implants.

Nanostructured Multilayer Films Assembled from Poly(dopamine)‐Coated Carbon Nanotubes for Controlling Cell Behavior

Nano‐topographic surfaces have been used as an effective tool to control cell behavior such as adhesion and proliferation. In this study, multilayer films with nano‐topographic features were fabricated by alternatively assembling poly(l‐lysine) (PLL) and poly(dopamine)‐coated carbon nanotubes (CNTs@PDA) layers. The growth of PLL/CNTs@PDA film presented a perfect linear relationship with the number of bilayers. A nanostructured morphology with interpenetrating CNT networks was observed by scanning electron microscopy (SEM). Adhesion and proliferation of endothelial cells (ECs) and smooth muscle cells (SMCs) on the PLL/CNTs@PDA multilayer films have been evaluated. The films support initial adhesion of both ECs and SMCs. Interestingly, the PLL/CNTs@PDA multilayer films were found to promote proliferation of SMCs and inhibited proliferation of ECs. Further, pheochromocytoma (PC12) cells were employed to evaluate the influence of PLL/CNTs@PDA multilayer films on the outgrowth of synapses. We found that the nanostructured surface significantly promoted the synapses of PC12 cell growth and formation. Our findings suggest that cytophilic surfaces with the nanostructured morphology have diverse effects on different cells, which sheds light on new design of biomaterial surfaces in cell‐based applications.

Functional Modification of Electrospun Poly(ε-caprolactone) Vascular Grafts with the Fusion Protein VEGF-HGFI Enhanced Vascular Regeneration

Synthetic artificial vascular grafts have exhibited low patency rate and severe neointimal hyperplasia in replacing small-caliber arteries (<6 mm) because of their failure to generate a functional endothelium. In this study, small-caliber (2.0 mm) electrospun poly(ε-caprolactone) (PCL) vascular grafts were modified with a fusion protein VEGF-HGFI which consists of the class I hydrophobin (HGFI) and vascular endothelial growth factor (VEGF), via hydrophobic interactions. Immunofluorescence staining with the anti-VEGF antibody showed that VEGF-HGFI formed a protein layer on the surface of fibers in the grafts. Scanning electron microscopy (SEM) and mechanical measurements showed that VEGF-HGFI modification had no effect on the structure and mechanical properties of PCL grafts. Blood compatibility tests demonstrated a lower level of fibrinogen (FGN) absorption, platelet activation, and aggregation on the VEGF-HGFI-modified PCL mats than that on the bare PCL mats. The hemolysis rate was comparable in both the modified and bare PCL mats. In vitro culture of human umbilical vein endothelial cells (HUVECs) demonstrated that VEGF-HGFI modification could remarkably enhance nitric oxide (NO) production, prostacyclin₂ (PGI₂) release, and the uptake of acetylated low-density lipoprotein (Ac-LDL) by HUVECs. The healing characteristics of the modified grafts were examined in the replacement of rat abdominal aorta for up to 1 month. Immunofluorescence staining revealed that endothelialization, vascularization, and smooth muscle cell (SMC) regeneration were markedly improved in the VEGF-HGFI-modified PCL grafts. These results suggest that modification with fusion protein VEGF-HGFI is an effective method to improve the regeneration capacity of synthetic vascular grafts.

End-point immobilization of heparin on plasma-treated surface of electrospun polycarbonate-urethane vascular graft

Small-diameter synthetic vascular grafts have high failure rate due to primarily surface thrombogenicity, and effective surface chemical modification is critical to maintain the patency of the grafts. In this study, we engineered a small-diameter, elastic synthetic vascular graft with off-the-shelf availability and anti-thrombogenic activity. Polycarbonate-urethane (PCU), was electrospun to produce nanofibrous grafts that closely mimicked a native blood vessel in terms of structural and mechanical strength. To overcome the difficulty of adding functional groups to PCU, we explored various surface modification methods, and determined that plasma treatment was the most effective method to modify the graft surface with functional amine groups, which were subsequently employed to conjugate heparin via end-point immobilization. In addition, we confirmed in vitro that the combination of plasma treatment and end-point immobilization of heparin exhibited the highest surface density and correspondingly the highest anti-thrombogenic activity of heparin molecules. Furthermore, from an in vivo study using a rat common carotid artery anastomosis model, we showed that plasma-heparin grafts had higher patency rate at 2weeks and 4weeks compared to plasma-control (untreated) grafts. More importantly, we observed a more complete endothelialization of the luminal surface with an aligned, well-organized monolayer of endothelial cells, as well as more extensive graft integration in terms of vascularization and cell infiltration from the surrounding tissue. This work demonstrates the feasibility of electrospinning PCU as synthetic elastic material to fabricate nanofibrous vascular grafts, as well as the potential to endow desired functionalization to the graft surface via plasma treatment for the conjugation of heparin or other bioactive molecules.

STATEMENT OF SIGNIFICANCE

Vascular occlusion remains the leading cause of death all over the world, despite advances made in balloon angioplasty and conventional surgical intervention. Currently, autografts are the gold-standard grafts used to treat vascular occlusive disease. However, many patients with vascular occlusive disease do not have autologous vascular graft available. Therefore, there is a widely recognized need for a readily available, functional, small-diameter vascular graft (inner diameter of <6mm). This work addresses this critical need by developing a method of antithrombogenic modification of synthetic grafts.

Mussel-inspired post-heparinization of a stretchable hollow hydrogel tube and its potential application as an artificial blood vessel

We report the fabrication and post-functionalization of a highly stretchable hydrogel tube and its potential application as an artificial blood vessel.

Recent advances to accelerate re-endothelialization for vascular stents

Cardiovascular diseases are considered as one of the serious diseases that leads to the death of millions of people all over the world. Stent implantation has been approved as an easy and promising way to treat cardiovascular diseases. However, in-stent restenosis and thrombosis remain serious problems after stent implantation. It was demonstrated in a large body of previously published literature that endothelium impairment represents a major factor for restenosis. This discovery became the driving force for many studies trying to achieve an optimized methodology for accelerated re-endothelialization to prevent restenosis. Thus, in this review, we summarize the different methodologies opted to achieve re-endothelialization, such as, but not limited to, manipulation of surface chemistry and surface topography.

Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering

Regenerative engineering converges tissue engineering, advanced materials science, stem cell science, and developmental biology to regenerate complex tissues such as whole limbs. Regenerative engineering scaffolds provide mechanical support and nanoscale control over architecture, topography, and biochemical cues to influence cellular outcome. In this regard, poly (lactic acid) (PLA)-based biomaterials may be considered as a gold standard for many orthopaedic regenerative engineering applications because of their versatility in fabrication, biodegradability, and compatibility with biomolecules and cells. Here we discuss recent developments in PLA-based biomaterials with respect to processability and current applications in the clinical and research settings for bone, ligament, meniscus, and cartilage regeneration.

Nanofiber-mediated microRNA-126 delivery to vascular endothelial cells for blood vessel regeneration

As manipulation of gene expression by virtue of microRNAs (miRNAs) is one of the emerging strategies for cardiovascular disease remedy, local delivery of miRNAs to a specific vascular tissue is challenging. In this work, we developed an efficient delivery system composed of electrospun fibrous membranes and target carriers for the intracellular delivery of miRNA-126 (miR-126) to vascular endothelial cells (VECs) in the local specific vascular environment. A bilayer vascular scaffold was specially prepared via emulsion electrospinning of poly(ethylene glycol)-b-poly(l-lactide-co-ε-caprolactone) (PELCL) and dual-power electrospinning of poly(ε-caprolactone) (PCL) and gelatin. The inner layer of PELCL, which was loaded with complexes of miR-126 in REDV peptide-modified trimethyl chitosan-g-poly(ethylene glycol), regulated the response of VECs, while the outer layer of PCL/gelatin contributed to the mechanical stability. Biological activities of the miR-126-loaded electrospun membranes were evaluated by cell proliferation and SPRED-1 expression of a miR-126 target gene. By encapsulating targeting complexes of miR-126 in the electrospun membranes, a sustained release profile of miRNA was obtained for 56days. Significant down-regulation of SPRED-1 gene expression in VECs was detected on day 3, and it was found that miR-126 released from the electrospun membranes accelerated VEC proliferation in the first 9days. The bilayer vascular scaffold loaded with miR-126 complexes could also improve endothelialization in vivo. These results demonstrated the potential of this approach towards a new and more effective delivering system for local delivery of miRNAs to facilitate blood vessel regeneration.

STATEMENT OF SIGNIFICANCE

Tissue engineering of small-diameter blood vessels is still challenging because of thrombosis and low long-term patency. The manipulation of gene expression by miRNAs could be a novel strategy in vascular regeneration. Here, we report an efficient delivery system of electrospun fibrous scaffold combined with REDV peptide-modified trimethyl chitosan for targeted intracellular delivery of miR-126 to VECs in the local vascular environment. Results exhibited that miR-126 released from the electrospun membrane could modulate VEC proliferation via down-regulation of SPRED-1 gene expression. The electrospun scaffolds loaded with target-delivery carriers may serve as an ideal platform for local delivery of miRNAs in the vascular tissue engineering.

Functional Modification of Fibrous PCL Scaffolds with Fusion Protein VEGF-HGFI Enhanced Cellularization and Vascularization

The lack of efficient vascularization within frequently used poly(ε-caprolactone) (PCL) scaffolds has hindered their application in tissue engineering. Hydrophobin HGFI, an amphiphilic protein, can form a self-assembly layer on the surface of PCL scaffolds and convert their wettability. In this study, a fusion protein consisting of HGFI and vascular endothelial growth factor (VEGF) is prepared by Pichia pastoris expression system. Sodium dodecyl sulface-polyacrylamide gel electrophoresis (SDS-PAGE) and western blotting confirm that the VEGF-HGFI is successfully isolated and purified. Transmission electron microscope and water contact angle measurement demonstrate that VEGF-HGFI can form a self-assembly layer with about 25 nm in thickness on electrospun PCL fibers and increase their hydrophilicity. VEGF-HGFI modification can effectively enhance the adhesion, migration, and proliferation of human umbilical vein endothelial cells. Near-infrared fluorescence imaging shows that the VEGF-HGFI modification on PCL scaffolds can exist at least 21 d in vitro and at least 14 d in vivo. Bioluminescence imaging shows that VEGF-HGFI can effectively activate vascular endothelial growth factor receptor 2 receptors. Subcutaneous implantation in mice and rats reveal that cellularization and vascularization are significantly improved in VEGF-HGFI modified PCL scaffolds. These results suggest that VEGF-HGFI is a useful molecule for functional modification of scaffolds to enhance cellularization and vascularization in tissue engineering.

Effect of fibroin sponge coating on in vivo performance of knitted silk small diameter vascular grafts

Vascular grafts under 5 mm or less in diameter are not developed due to a problem caused by early thrombus formation, neointimal hyperplasia, etc. Bombyx mori silk fibroin (SF) which has biodegradability and tissue infiltration is focused as tube and coating material of vascular grafts. Coating is an important factor to maintain the strength of the anastomotic region of vascular grafts, and to prevent the blood leak from the vascular grafts after implantation. Therefore, in this research, we focused on the SF concentration of the coating solution, and tissue infiltration and remodeling were compared among each SF concentration. Silk poly (-ethylene) glycol diglycidyl ether (PGDE) coating with concentrations of 1.0%, 2.5%, 5.0%, and 7.5% SF were applied for the double-raschel knitted small-sized vessel with 1.5 mm diameter and 1cm in length. The grafts were implanted in the rat abdominal aorta and removed after 3 weeks or 3 months. Vascular grafts patency was monitored by ultrasound, and morphological evaluation was performed by histopathological examination. SF concentration had no significant effects on the patency rate. However, tissue infiltration was significantly higher in the sample of 2.5% SF in 3 weeks, and 1.0% and 2.5% SF in 3 months. Also, in comparison of length inside of the graft, stenosis were not found in 3 weeks, however, found with 5.0% and 7.5% in 3 months. From these results, it is clear that 2.5% SF coating is the most suitable concentration, based on the characteristics of less stenosis, early tissue infiltration, and less neointimal hyperplasia.

Substrate-mediated delivery of gene complex nanoparticles via polydopamine coating for enhancing competitiveness of endothelial cells

Substrate-mediated delivery of functional plasmid DNA (pDNA) has been proven to be a promising strategy to promote competitiveness of endothelial cells (ECs) over smooth muscle cells (SMCs), which is beneficial to inducing fast endothelialization of implanted vascular devices. Thus, it is of great importance to develop universal approaches with simplicity and easiness to immobilize DNA complex nanoparticles on substrates. In this study, the bioinspired polydopamine (PDA) coating was employed in immobilization of DNA complex nanoparticles, which were composed of protamine (PrS) and plasmid DNA encoding with hepatocyte growth factor (HGF-pDNA) gene. We demonstrated that the DNA complex nanoparticles can be successfully immobilized onto the PDA surface. Consequently, the HGF expression of both ECs and SMCs were significantly improved when they cultured on the DNA complex nanoparticles-immobilized substrates. Furthermore, EC proliferation was specifically promoted due to bioactivity of HGF, leading to an enhancement of EC competitiveness over SMCs. Our findings demonstrated the substrate-mediated functional gene nanoparticle delivery through PDA coating as a simple and efficient approach. It may hold great potential in the field of interventional cardiovascular implants.

Multifunctional mussel-inspired copolymerized epigallocatechin gallate (EGCG)/arginine coating: the potential as an ad-layer for vascular materials

Surface properties are considered to be important factors in addressing proper functionalities. In this paper, a multifunctional mussel-inspired coating was prepared via the direct copolymerization of epigallocatechin gallate (EGCG) and arginine. The coating formation was confirmed by X-ray photoelectron spectroscopy and Fourier transform infrared spectra. The EGCG/arginine coating contained diverse functional groups like amines, phenols and carboxyls, whose densities were also tunable. Such mussel-inspired coating could also be applied as an ad-layer for its secondary reactivity, demonstrated by quartz crystal microbalance technique. Moreover, the tunable surface density of phenols showed potential ability in modulating endothelial cell and smooth muscle cell viability. The coatings rich in phenols presented excellent free radical scavenging property. Current results strongly indicated the potential of EGCG/arginine coatings to be applied as an ad-layer for vascular materials.

Improved Endothelial Function of Endothelial Cell Monolayer on the Soft Polyelectrolyte Multilayer Film with Matrix-Bound Vascular Endothelial Growth Factor

Endothelialization on the vascular implants is of great importance for prevention of undesired postimplantation symptoms. However, endothelial dysfunction of regenerated endothelial cell (EC) monolayer has been frequently observed, leading to severe complications, such as neointimal hyperplasia, late thrombosis, and neoatherosclerosis. It has significantly impeded long-term success of the therapy. So far, very little attention has been paid on endothelial function of EC monolayer. Bioinspired by the microenvironment of the endothelium in a blood vessel, this study described a soft polyelectrolyte multilayer film (PEM) through layer-by-layer assembly of poly(l-lysine) (PLL) and hyaluronan (HA). The (PLL/HA) PEM was chemically cross-linked and further incorporated with vascular endothelial growth factor. It demonstrated that this approach could promote EC adhesion and proliferation, further inducing formation of EC monolayer. Further, improved endothelial function of the EC monolayer was achieved as shown with the tighter integrity, higher production of nitric oxide, and expression level of endothelial function related genes, compared to EC monolayers on traditional substrates with high stiffness (e.g., glass, tissue culture polystyrene, and stainless steel). Our findings highlighted the influence of substrate stiffness on endothelial function of EC monolayer, giving a new strategy in the surface design of vascular implants.

Electrospun PELCL membranes loaded with QK peptide for enhancement of vascular endothelial cell growth

One of the major challenges in tissue engineering of small-diameter vascular grafts is to inhibit intimal hyperplasia and keep long-term patency after implantation. Rapid endothelialization of the grafts could be an effective approach. In this study, QK, a peptide mimicking vascular endothelial growth factor, was selected as the bioactive substrate and loaded in electrospun membranes for enhancement of vascular endothelial cell growth. In detail, QK peptide was firstly introduced with poly(ethylene glycol) diacrylate into a thiolated chitosan solution that could transfer into hydrogel. Then, suspensions or emulsions of poly(ethylene glycol)-b-poly(L-lactide-co-ε-caprolactone) (PELCL) containing QK peptide (with or without chitosan hydrogel) were electrospun into fibrous membranes. For comparison, the electrospun PELCL membrane without QK was also fabricated. Results of release behaviors showed that the electrospun membranes, especially that contained chitosan hydrogel prepared by suspension electrospinning, could successfully encapsulate QK peptide and maintain its secondary structure after released. In vitro cell culture studies exhibited that the release of QK peptide could accelerate the proliferation of vascular endothelial cells in the 9 days. It was suggested that the electrospun PELCL membranes loaded with QK peptide might have potential applications in vascular tissue engineering.

Co-immobilization of adhesive peptides and VEGF within a dextran-based coating for vascular applications

Multifunctional constructs providing a proper environment for adhesion and growth of selected cell types are needed for most tissue engineering and regenerative medicine applications. In this context, vinylsulfone (VS)-modified dextran was proposed as a matrix featuring low-fouling properties as well as multiple versatile moieties. The displayed VS groups could indeed react with thiol, amine or hydroxyl groups, be it for surface grafting, crosslinking or subsequent tethering of biomolecules. In the present study, a library of dextran-VS was produced, grafted to aminated substrates and characterized in terms of degree of VS modification (%VS), cell-repelling properties and potential for the oriented grafting of cysteine-tagged peptides. As a bioactive coating of vascular implants, ECM peptides (e.g. RGD) as well as vascular endothelial growth factor (VEGF) were co-immobilized on one of the most suitable dextran-VS coating (%VS=ca. 50% of saccharides units). Both RGD and VEGF were efficiently tethered at high densities (ca. 1nmol/cm(2) and 50fmol/cm(2), respectively), and were able to promote endothelial cell adhesion as well as proliferation. The latter was enhanced to the same extent as with soluble VEGF and proved selective to endothelial cells over smooth muscle cells. Altogether, multiple biomolecules could be efficiently incorporated into a dextran-VS construct, while maintaining their respective biological activity.

STATEMENT OF SIGNIFICANCE

This work addresses the need for multifunctional coatings and selective cell response inherent to many tissue engineering and regenerative medicine applications, for instance, vascular graft. More specifically, a library of dextrans was first generated through vinylsulfone (VS) modification. Thoroughly selected dextran-VS provided an ideal platform for unbiased study of cell response to covalently grafted biomolecules. Considering that processes such as healing and angiogenesis require multiple factors acting synergistically, vascular endothelial growth factor (VEGF) was then co-immobilized with the cell adhesive RGD peptide within our dextran coating through a relevant strategy featuring orientation and specificity. Altogether, both adhesive and proliferative cues could be incorporated into our construct with additive, if not synergetic, effects.

Dihydroxynaphthalene-based mimicry of fungal melanogenesis for multifunctional coatings

Material-independent adhesive action derived from polycatechol structures has been intensively studied due to its high applicability in surface engineering. Here, we for the first time demonstrate that a dihydroxynaphthalene-based fungal melanin mimetic, which exhibit a catechol-free structure, can act as a coating agent for material-independent surface modifications on the nanoscale. This mimetic was made by using laccase to catalyse the oxidative polymerization of specifically 2,7-dihydroxynaphthalene. Analyses of the product of this reaction, using Fourier transform infrared-attenuated total reflectance and X-ray photoelectron spectroscopy, bactericidal action, charge-dependent sorption behaviour, phenol content, Zeta potential measurements and free radical scavenging activity, yielded results consistent with it containing hydroxyphenyl groups. Moreover, nuclear magnetic resonance analyses of the product revealed that C-O coupling and C-C coupling were the main mechanisms for its synthesis, thus clearly excluding a catechol structure in the polymerization. This product, termed poly(2,7-DHN), was successfully deposited onto a wide variety of solid surfaces, including metals, polymeric materials, ceramics, biosurfaces and mineral complexes. The melanin-like polymerization could be used to co-immobilize other organic molecules, forming functional surfaces. In addition, the hydroxyphenyl group contained in the coated poly(2,7-DHN) induced secondary metal chelation/reduction and adhesion with proteins, suggesting the potential of this poly(2,7-DHN) layer to serve as a platform material for a variety of surface engineering applications. Moreover, the novel physicochemical properties of the poly(2,7-DHN) illuminate its potential applications as bactericidal, radical-scavenging and pollutant-sorbing agents.

Facile immobilization of vascular endothelial growth factor on a tannic acid-functionalized plasma-polymerized allylamine coating rich in quinone groups

Biomolecules like VEGF with thiol or amine groups can easily be covalently immobilized onto a Tannic Acid functional plasma polymerized allylamine surface rich in quinone groups in a mild alkali buffer solution based on Schiff base or Michael addition reactions.

In situ Endothelialization: Bioengineering Considerations to Translation

Improving patency rates of current cardiovascular implants remains a major challenge. It is widely accepted that regeneration of a healthy endothelium layer on biomaterials could yield the perfect blood-contacting surface. Earlier efforts in pre-seeding endothelial cells in vitro demonstrated success in enhancing patency, but translation to the clinic is largely hampered due to its impracticality. In situ endothelialization, which aims to create biomaterial surfaces capable of self-endothelializing upon implantation, appears to be an extremely promising solution, particularly with the utilization of endothelial progenitor cells (EPCs). Nevertheless, controlling cell behavior in situ using immobilized biomolecules or physical patterning can be complex, thus warranting careful consideration. This review aims to provide valuable insight into the rationale and recent developments in biomaterial strategies to enhance in situ endothelialization. In particular, a discussion on the important bio-/nanoengineering considerations and lessons learnt from clinical trials are presented to aid the future translation of this exciting paradigm.

Polydopamine-Gelatin as Universal Cell-Interactive Coating for Methacrylate-Based Medical Device Packaging Materials: When Surface Chemistry Overrules Substrate Bulk Properties

Despite its widespread application in the fields of ophthalmology, orthopedics, and dentistry and the stringent need for polymer packagings that induce in vivo tissue integration, the full potential of poly(methyl methacrylate) (PMMA) and its derivatives as medical device packaging material has not been explored yet. We therefore elaborated on the development of a universal coating for methacrylate-based materials that ideally should reveal cell-interactivity irrespective of the polymer substrate bulk properties. Within this perspective, the present work reports on the UV-induced synthesis of PMMA and its more flexible poly(ethylene glycol) (PEG)-based derivative (PMMAPEG) and its subsequent surface decoration using polydopamine (PDA) as well as PDA combined with gelatin B (Gel B). Successful application of both layers was confirmed by multiple surface characterization techniques. The cell interactivity of the materials was studied by performing live-dead assays and immunostainings of the cytoskeletal components of fibroblasts. It can be concluded that only the combination of PDA and Gel B yields materials possessing similar cell interactivities, irrespective of the physicochemical properties of the underlying substrate. The proposed coating outperforms both the PDA functionalized and the pristine polymer surfaces. A universal cell-interactive coating for methacrylate-based medical device packaging materials has thus been realized.

Osteoinductive peptide-functionalized nanofibers with highly ordered structure as biomimetic scaffolds for bone tissue engineering

The construction of functional biomimetic scaffolds that recapitulate the topographical and biochemical features of bone tissue extracellular matrix is now of topical interest in bone tissue engineering. In this study, a novel surface-functionalized electrospun polycaprolactone (PCL) nanofiber scaffold with highly ordered structure was developed to simulate the critical features of native bone tissue via a single step of catechol chemistry. Specially, under slightly alkaline aqueous solution, polydopamine (pDA) was coated on the surface of aligned PCL nanofibers after electrospinning, followed by covalent immobilization of bone morphogenetic protein-7-derived peptides onto the pDA-coated nanofiber surface. Contact angle measurement, Raman spectroscopy, and X-ray photoelectron spectroscopy confirmed the presence of pDA and peptides on PCL nanofiber surface. Our results demonstrated that surface modification with osteoinductive peptides could improve cytocompatibility of nanofibers in terms of cell adhesion, spreading, and proliferation. Most importantly, Alizarin Red S staining, quantitative real-time polymerase chain reaction, immunostaining, and Western blot revealed that human mesenchymal stem cells cultured on aligned nanofibers with osteoinductive peptides exhibited enhanced osteogenic differentiation potential than cells on randomly oriented nanofibers. Furthermore, the aligned nanofibers with osteoinductive peptides could direct osteogenic differentiation of human mesenchymal stem cells even in the absence of osteoinducting factors, suggesting superior osteogenic efficacy of biomimetic design that combines the advantages of osteoinductive peptide signal and highly ordered nanofibers on cell fate decision. The presented peptide-decorated bone-mimic nanofiber scaffolds hold a promising potential in the context of bone tissue engineering.

Osteogenic Surface Modification Based on Functionalized Poly-P-Xylylene Coating

The biotechnology to immobilize biomolecules on material surfaces has been developed vigorously due to its high potentials in medical applications. In this study, a simple and effective method was designed to immobilize biomolecules via amine-N-hydroxysuccinimide (NHS) ester conjugation reaction using functionalized poly-p-xylylene coating on material surfaces. The NHS ester functionalized coating is synthesized via chemical vapor deposition, a facile and solvent-less method, creating a surface which is ready to perform a one-step conjugation reaction. Bone morphogenetic protein 2 (BMP-2) is immobilized onto material surfaces by this coating method, forming an osteogenic environment. The immobilization process is controlled at a low temperature which does not damage proteins. This modified surface induces differentiation of preosteoblast into osteoblast, manifested by alkaline phosphatase (ALP) activity assay, Alizarin Red S (ARS) staining and the expression of osteogenic gene markers, Alpl and Bglap3. With this coating technology, immobilization of growth factors onto material surface can be achieved more simply and more effectively.

Electron Paramagnetic Resonance Imaging and Spectroscopy of Polydopamine Radicals

A thorough investigation of biomimetic polydopamine (PDA) by Electron Paramagnetic Resonance (EPR) is shown. In addition, temperature dependent spectroscopic EPR data are presented in the range 3.8-300 K. Small discrepancies in magnetic susceptibility behavior are observed between previously reported melanin samples. These variations were attributed to thermally acitivated processes. More importantly, EPR spatial-spatial 2D imaging of polydopamine radicals on a phantom is presented for the first time. In consequence, a new possible application of polydopamine as EPR imagining marker is addressed.

Surface tailoring for selective endothelialization and platelet inhibition via a combination of SI-ATRP and click chemistry using Cys-Ala-Gly-peptide

Surface tailoring is an attractive approach to enhancing selective endothelialization, which is a prerequisite for current vascular prosthesis applications. Here, we modified polycarbonate urethane (PCU) surface with both poly(ethylene glycol) and Cys-Ala-Gly-peptide (CAG) for the purpose of creating a hydrophilic surface with targeting adhesion of endothelial cells (ECs). In the first step, PCU-film surface was grafted with poly(ethylene glycol) methacrylate (PEGMA) to covalently tether hydrophilic polymer brushes via surface initiated atom transfer radical polymerization (SI-ATRP), followed by grafting of an active monomer pentafluorophenyl methacrylate (PFMA) by a second ATRP. The postpolymerization modification of the terminal reactive groups with allyl amine molecules created pendant allyl groups, which were subsequently functionalized with cysteine terminated CAG-peptide via photo-initiated thiol-ene click chemistry. The functionalized surfaces were characterized by water contact angle and XPS analysis. The growth and proliferation of human ECs or human umbilical arterial smooth muscle cells on the functionalized surfaces were investigated for 1, 3 and 7 day/s. The results indicated that these peptide functionalized surfaces exhibited enhanced EC adhesion, growth and proliferation. Furthermore, they suppressed platelet adhesion in contact with platelet-rich plasma for 2h. Therefore, these surfaces with EC targeting ligand could be an effective anti-thrombogenic platform for vascular tissue engineering application.

Folic acid-polydopamine nanofibers show enhanced ordered-stacking via π-π interactions

Recent research has indicated that polydopamine and synthetic eumelanins are optoelectronic biomaterials in which one-dimensional aggregates composed of ordered-stacking oligomers have been proposed as unique organic semiconductors. However, improving the ordered-stacking of oligomers in polydopamine nanostructures is a big challenge. Herein, we first demonstrate how folic acid molecules influence the morphology and nanostructure of polydopamine via tuning the π-π interactions of oligomers. MALDI-TOF mass spectrometry reveals that porphyrin-like tetramers are characteristic of folic acid-polydopamine (FA-PDA) nanofibers. X-ray diffraction combined with simulation studies indicate that these oligomers favour aggregation into graphite-like ordered nanostructures via strong π-π interactions. High-resolution TEM characterization of carbonized FA-PDA hybrids show that in FA-PDA nanofibers the size of the graphite-like domains is over 100 nm. The addition of folic acid in polydopamine enhances the ordered stacking of oligomers in its nanostructure. Our study steps forward to discover the mystery of the structure-property relationship of FA-PDA hybrids. It paves a way to optimize the properties of PDA through the design and selection of oligomer structures.

Effects of Immobilized BMP-2 and Nanofiber Morphology on In Vitro Osteogenic Differentiation of hMSCs and In Vivo Collagen Assembly of Regenerated Bone

Engineering bone tissue is particularly challenging because of the distinctive structural features of bone within a complex biochemical environment. In the present study, we fabricated poly(L-lactic acid) (PLLA) electrospun nanofibers with random and aligned morphology immobilized with bone morphogenic protein-2 (BMP-2) and investigated how these signals modulate (1) in vitro osteogenic differentiation of human mesenchymal stem cells (hMSCs) and (2) in vivo bone growth rate, mechanical properties, and collagen assembly of newly formed bone. The orientation of adherent cells followed the underlying nanofiber morphology; however, nanofiber alignment did not show any difference in alkaline phosphate activity or in calcium mineralization of hMSCs after 14 days of in vitro culture in osteogenic differentiation media. In vivo bone regeneration was significantly higher in the nanofiber implanted groups (approximately 65-79%) as compared to the defect-only group (11.8 ± 0.2%), while no significant difference in bone regeneration was observed between random and aligned groups. However, nanoindentation studies of regenerated bone revealed Young's modulus and contact hardness with anisotropic feature for aligned group as compared to random group. More importantly, structural analysis of collagen at de novo bone showed the ability of nanofiber morphology to guide collagen deposition. SEM and TEM images revealed regular, highly ordered collagen assemblies on aligned nanofibers as compared to random fibers, which showed irregular, randomly organized collagen deposition. Taken together, we conclude that nanofibers in the presence of osteoinductive signals are a potent tool for bone regeneration, and nanofiber alignment can be used for engineering bone tissues with structurally assembled collagen fibers with defined direction.

Contrasting biofunctionalization strategies for the enhanced endothelialization of biodegradable vascular grafts

Surface modification of biodegradable vascular grafts is an important strategy to improve the in situ endothelialization of tissue engineered vascular grafts (TEVGs) and prevent major complications associated with current synthetic grafts. Important strategies for improving endothelialization include increasing endothelial cell mobilization and increased endothelial cell capture through biofunctionalization of TEVGs. The objective of this study was to assess two biofunctionalization strategies for improving endothelialization of biodegradable polyester vascular grafts. These techniques consisted of cross-linking heparin to graft surfaces to immobilize vascular endothelial growth factor (VEGF) or antibodies against CD34 (anti-CD34Ab). To this end, heparin, VEGF, and anti-CD34Ab attachment and quantification assays confirmed the efficacy of the modification strategy. Cell attachment and proliferation on these groups were compared to unmodified grafts in vitro and in vivo. To assess in vivo graft functionality, the grafts were implanted as inferior vena cava interpositional conduits in mice. Modified vascular grafts displayed increased endothelial cell attachment and activity in vivo, according to microscopy techniques, histological results, and eNOS expression. Inner lumen diameter of the modified grafts was also better maintained than controls. Overall, while both functionalized grafts outperformed the unmodified control, grafts modified with anti-CD34Ab appeared to yield the most improved results compared to VEGF-loaded grafts.

Surface modification and endothelialization of biomaterials as potential scaffolds for vascular tissue engineering applications

This review highlights the recent developments of surface modification and endothelialization of biomaterials in vascular tissue engineering applications.

Accelerating in situ endothelialisation of cardiovascular bypass grafts

The patency of synthetic cardiovascular grafts in the long run is synonymous with their ability to inhibit the processes of intimal hyperplasia, thrombosis and calcification. In the human body, the endothelium of blood vessels exhibits characteristics that inhibit such processes. As such it is not surprising that research in tissue engineering is directed towards replicating the functionality of the natural endothelium in cardiovascular grafts. This can be done either by seeding the endothelium within the lumen of the grafts prior to implantation or by designing the graft such that in situ endothelialisation takes place after implantation. Due to certain difficulties identified with in vitro endothelialisation, in situ endothelialisation, which will be the focus of this article, has garnered interest in the last years. To promote in situ endothelialisation, the following aspects can be taken into account: (1) Endothelial progenital cell mobilization, adhesion and proliferation; (2) Regulating differentiation of progenitor cells to mature endothelium; (3) Preventing thrombogenesis and inflammation during endothelialisation. This article aims to review and compile recent developments to promote the in situ endothelialisation of cardiovascular grafts and subsequently improve their patency, which can also have widespread implications in the field of tissue engineering.

Biological reaction to small-diameter vascular grafts made of silk fibroin implanted in the abdominal aortae of rats

BACKGROUND

Bombyx mori silk fibroin (SF) is biocompatible and degradable and has been proposed as a new material for small-diameter vascular grafts. We compared biological reactions to vascular grafts made of SF and polyethylene terephthalate (PET) to reveal the potential ability of SF as a base and/or coating materials for vascular prostheses.

METHODS

SF was combined with PET or gelatin (G) to make 4 types of vascular grafts (SF/SF, SF/G, PET/SF, and PET/G, shown as "base/coating material," respectively), which are 1.5 mm in diameter and 10 mm in length. The 4 types of grafts (n = 6, respectively) were implanted into rat abdominal aortae and explanted 2 weeks or 3 months later.

RESULTS

Two weeks after implantation, there are no significant differences among the 4 kinds of grafts in biological reactions evaluated by histopathologic examination. However, a remarkable difference was observed after 3 months. The area of tissue infiltration into the inside of the graft wall was approximately 2.5 times larger in SF/SF than that in PET/G. The endothelialization was achieved almost 100% in SF/SF, despite only 50% was achieved in PET/G.

CONCLUSIONS

Results show that SF has a higher potential as a base of vascular grafts than the commercially available PET/G graft. The larger tissue infiltration area in PET/SF compared with that in PET/G also indicates the potential of SF as a coating material. In the present study, SF delivered promising results as base and coating materials for small-diameter vascular prostheses.