Phosphorylated proteins and control over apatite nucleation, crystal growth, and inhibition

Promoting effect of a calcium-responsive self-assembly β-sheet peptide on collagen intrafibrillar mineralization

Recently, a de novo synthetic calcium-responsive self-assembly β-sheet peptide ID8 (Ile-Asp-Ile-Asp-Ile-Asp-Ile-Asp) has been developed to serve as the template inducing hydroxyapatite nucleation. The aim of this study was to evaluate the effect of ID8 on intrafibrillar mineralization of collagen making full use of its self-assembly ability. The mineralization experiments were carried out in vitro on both bare Type I collagen and fully demineralized dentin samples. The calcium-responsive self-assembly of ID8 was revealed by circular dichroism spectrum, 8-anilino-1-naphthalenesulfonic acid ammonium salt hydrate assay, attenuated total reflection Fourier transform infrared spectrum (ATR-FTIR) and transmission electron microscope (TEM). Polyacrylic acid (450 kDa) with a concentration of 100 μg ml⁻¹ was selected as the nucleation inhibitor based on the determination of turbidimetry and TEM with selected area electron diffraction (TEM-SAED). The results showed that collagen intrafibrillar mineralization was significantly promoted with the pretreatment of self-assembly ID8 detected by TEM-SAED, SEM, X-ray diffraction and ATR-FTIR. The pretreatment of collagen utilizing self-assembly ID8 not only enhanced intermolecular hydrogen bonding but also contributed to calcium retention inside collagen and significantly increased the hydrophilicity of collagen. These results indicated that peptides with self-assembly properties like ID8 are expected to be potential tools for biomimetic mineralization of collagen.

Between a rock and a hard place: Regulation of mineralization in the periodontium

The periodontium supports and attaches teeth via mineralized and nonmineralized tissues. It consists of two, unique mineralized tissues, cementum and alveolar bone. In between these tissues, lies an unmineralized, fibrous periodontal ligament (PDL), which distributes occlusal forces, nourishes and invests teeth, and harbors progenitor cells for dentoalveolar repair. Many unanswered questions remain regarding periodontal biology. This review will focus on recent research providing insights into one enduring mystery: the precise regulation of the hard-soft tissue borders in the periodontium which define the interfaces of the cementum-PDL-alveolar bone structure. We will focus on advances in understanding the molecular mechanisms that maintain the unmineralized PDL "between a rock and a hard place" by regulating the mineralization of cementum and alveolar bone.

A Dentin Biomimetic Remineralization Material with an Ability to Stabilize Collagen

The integrity of collagen matrix structure is a prerequisite for effectively inducing biomimetic remineralization. Repeated low pH stimulation activates matrix metalloproteinases (MMPs) in dental caries. Activated MMPs cause the breakdown of collagen fibrils. Collagen stabilization is a major obstacle to the clinical application of remineralization templates. Here, galardin-loaded poly(amido amine) (PAMAM)-NGV (PAMAM-NGV@galardin, PNG) is constructed to induce collagen stabilization and dentin biomimetic remineralization simultaneously, in order to combat early caries in dentin. PAMAM acts in the role of nucleation template for dentin remineralization, while galardin acts as the role of MMPs inhibitor. NGV peptides modified on the surface of dendrimer core can form small clusters with synergistic movement in short range, and those short-range clusters can form domain areas with different properties on the surface of PAMAM core and restrict the movement of collagen, favoring collagen crosslinking, which can be explained through the computational simulation analysis results. NGV peptides and galardin show a dual collagen-protective effect, laying the foundation for the dentin remineralization effect induced by PAMAM. PNG induces dentin remineralization in an environment with collagenase, meanwhile showsing anti-dentin caries efficacy in vivo. These findings indicate that PNG has great potential to combat early dentin caries for future clinical application.

Mineralization Profile of Annexin A6-Harbouring Proteoliposomes: Shedding Light on the Role of Annexin A6 on Matrix Vesicle-Mediated Mineralization

The biochemical machinery involved in matrix vesicles-mediated bone mineralization involves a specific set of lipids, enzymes, and proteins. Annexins, among their many functions, have been described as responsible for the formation and stabilization of the matrix vesicles' nucleational core. However, the specific role of each member of the annexin family, especially in the presence of type-I collagen, remains to be clarified. To address this issue, in vitro mineralization was carried out using AnxA6 (in solution or associated to the proteoliposomes) in the presence or in the absence of type-I collagen, incubated with either amorphous calcium phosphate (ACP) or a phosphatidylserine-calcium phosphate complex (PS-CPLX) as nucleators. Proteoliposomes were composed of 1,2-dipalmitoylphosphatidylcholine (DPPC), 1,2-dipalmitoylphosphatidylcholine: 1,2-dipalmitoylphosphatidylserine (DPPC:DPPS), and DPPC:Cholesterol:DPPS to mimic the outer and the inner leaflet of the matrix vesicles membrane as well as to investigate the effect of the membrane fluidity. Kinetic parameters of mineralization were calculated from time-dependent turbidity curves of free Annexin A6 (AnxA6) and AnxA6-containing proteoliposomes dispersed in synthetic cartilage lymph. The chemical composition of the minerals formed was investigated by Fourier transform infrared spectroscopy (FTIR). Free AnxA6 and AnxA6-proteoliposomes in the presence of ACP were not able to propagate mineralization; however, poorly crystalline calcium phosphates were formed in the presence of PS-CPLX, supporting the role of annexin-calcium-phosphatidylserine complex in the formation and stabilization of the matrix vesicles' nucleational core. We found that AnxA6 lacks nucleation propagation capacity when incorporated into liposomes in the presence of PS-CPLX and type-I collagen. This suggests that AnxA6 may interact either with phospholipids, forming a nucleational core, or with type-I collagen, albeit less efficiently, to induce the nucleation process.

The phosphorylation of serine55 in enamelin is essential for murine amelogenesis

Amelogenesis imperfecta (AI) is an inherited developmental enamel defect affecting tooth masticatory function, esthetic appearance, and the well-being of patients. As one of the major enamel matrix proteins (EMPs), enamelin (ENAM) has three serines located in Ser-x-Glu (S-x-E) motifs, which are potential phosphorylation sites for the Golgi casein kinase FAM20C. Defects in FAM20C have similarly been associated with AI. In our previous study of EnamRgsc514 mice, the Glu57 in the S55-X56-E57 motif was mutated into Gly, which was expected to cause a phosphorylation failure of Ser55 because Ser55 cannot be recognized by FAM20C. The severe enamel defects in ENAMRgsc514 mice reminiscent of Enam-knockout mouse enamel suggested a potentially important role of Ser55 phosphorylation in ENAM function. However, the enamel defects and ENAM dysfunction may also be attributed to distinct physicochemical differences between Glu57 and Gly57. To clarify the significance of Ser55 phosphorylation to ENAM function, we generated two lines of Enam knock-in mice using CRISPR-Cas9 method to eliminate or mimic the phosphorylation state of Ser55 by substituting it with Ala55 or Asp55 (designated as S55A or S55D), respectively. The teeth of 6-day or 4-week-old mice were subjected to histology, micro-CT, SEM, TEM, immunohistochemistry, and mass spectrometry analyses to characterize the morphological, microstructural and proteomic changes in ameloblasts, enamel matrix and enamel rods. Our results showed that the enamel formation and EMP expression in S55D heterozygotes (Het) were less disturbed than those in S55A heterozygotes, while both homozygotes (Homo) had no mature enamel formation. Proteomic analysis revealed alterations of enamel matrix biosynthetic and mineralization processes in S55A Hets. Our present findings indicate that Asp55 substitution partially mimics the phosphorylation state of Ser55 in ENAM. Ser55 phosphorylation is essential for ENAM function during amelogenesis.

Access to Phosphine-Containing Quinazolinones Enabled by Photo-Induced Radical Phosphorylation/Cyclization of Unactivated Alkenes

A mild and facile photo-induced cascade radical addition/cyclization of unactivated alkenes has been reported, through which a variety of biologically valuable phosphine-containing quinazolinones could be obtained in moderate to good yields. The protocol was characterized by mild conditions, broad substrate scope, and high atomic economy.

The Roles of SIBLING Proteins in Dental, Periodontal and Craniofacial Development

The majority of dental, periodontal, and craniofacial tissues are derived from the neural crest cells and ectoderm. Neural crest stem cells are pluripotent, capable of differentiating into a variety of cells. These cells can include osteoblasts, odontoblasts, cementoblasts, chondroblasts, and fibroblasts which are responsible for forming some of the tissues of the oral and craniofacial complex. The hard tissue forming cells deposit a matrix composed of collagen and non-collagenous proteins (NCPs) that later undergoes mineralization. The NCPs play a role in the mineralization of collagen. One such category of NCPs is the small integrin-binding ligand, N-linked glycoprotein (SIBLING) family of proteins. This family is composed of dentin sialophosphosprotein (DSPP), osteopontin (OPN), dentin matrix protein 1 (DMP1), bone sialoprotein (BSP), and matrix extracellular phosphoglycoprotein (MEPE). The SIBLING family is known to have regulatory effects in the mineralization process of collagen fibers and the maturation of hydroxyapatite crystals. It is well established that SIBLING proteins have critical roles in tooth development. Recent literature has described the expression and role of SIBLING proteins in other areas of the oral and craniofacial complex as well. The objective of the present literature review is to summarize and discuss the different roles the SIBLING proteins play in the development of dental, periodontal, and craniofacial tissues.

Direct phosphorylation of benzylic C-H bonds under transition metal-free conditions forming sp3C-P bonds

Direct phosphorylation of benzylic C-H bonds was achieved in a biphasic system under transition metal-free conditions. A selective radical/radical sp3C-H/P(O)-H cross coupling was proposed, and various substituted toluenes were applicable. The transformation provided a promising method for constructing sp3C-P bonds.

Highly Enantioselective Synthesis of [1,2,4]Triazino[5,4-a]isoquinoline Derivatives via (3 + 3) Cycloaddition Reactions of Diazo Compounds and Isoquinolinium Methylides

An array of chiral [1,2,4]triazino[5,4-a]isoquinoline derivatives were obtained in excellent yields (up to 98%) and with excellent enantioselectivities (up to 99% ee) via a new highly asymmetric (3 + 3) cycloaddition reaction of diazo compounds and isoquinolinium methylides, with a bifunctional chiral phase-transfer catalyst (PTC). Density functional theory calculations show that PTC has a bridge role in the deprotonation/protonation process. The obtained products were transformed into densely functionalized polycyclic heterocompounds with multiple stereocenters.

Reversible, β-sheet-dependent self-assembly of the phosphoprotein phosvitin is controlled by the concentration and valency of cations

The hyperphosphorylated protein phosvitin (PV) undergoes a pH-dependent transition between P_II^- and β-sheet secondary structures, a process deemed crucial for its role in the promotion of biogenic apatite formation. The transition occurs surprisingly slowly (minutes to hours). This is consistent with a slow aggregation process involving ionic interactions of charged groups on the protein surface. Herein, we determined the associated transition pK values and time constants through matrix least-squares (MLS) global fitting of a series of pH- and time-dependent circular dichroism (CD) spectra recorded in the presence of different mono-, bi- and trivalent cations. Supporting our results with dynamic light scattering data, we clearly identified a close correlation of β-sheet transition and the formation of small aggregates at low pH. This process is inhibited in the presence of all tested cations with the strongest effects for trivalent cations (Fe³⁺ and Al³⁺). In the presence of Ca²⁺ and Mg²⁺, larger higher-order particles are formed from PV in the β-sheet conformation, as identified from the interpretation of differential scattering observed in the CD spectra. Our observations are consistent with the existence of a multi-step equilibrium between aggregated and non-aggregated species of PV. The equilibrium is highly sensitive to the environment pH and salt concentration with exceptional behavior in the presence of divalent cations such as Ca²⁺ and Mg²⁺.

Insights Into Pulp Biomineralization in Human Teeth

Introduction

Mineralized pulp (MP) compromises tooth function and its causation is unknown. The hypothesis of this study is that pulp mineralization is associated with pulpal tissue adaptation, increased mineral densities, and decreased permeabilities of tubular dentin and cementum. Methods will include correlative spatial mapping of physicochemical and biochemical characteristics of pulp, and contextualize these properties within the dentin-pulp complex (DPC) to reveal the inherent vunerabilities of pulp.

Methods

Specimens (N = 25) were scanned using micro X-ray computed tomography (micro-XCT) to visualize MP and measure mineral density (MD). Elemental spatial maps of MP were acquired using synchrotron X-ray fluorescence microprobe (μXRF) and energy dispersive X-ray spectroscopy (EDX). Extracted pulp tissues were sectioned for immunolabelling and the sections were imaged using a light microscope. Microscale morphologies and nanoscale ultrastructures of MP were imaged using scanning electron (SEM) and scanning transmission electron microscopy (STEM) techniques.

Results

Heterogeneous distribution of MD from 200 to 2,200 mg/cc, and an average MD of 892 (±407) mg/cc were observed. Highly mineralized pulp with increased number of occluded tubules, reduced pore diameter in cementum, and decreased connectivity in lateral channels were observed. H&E, trichrome, and von Kossa staining showed lower cell and collagen densities, and mineralized regions in pulp. The biomolecules osteopontin (OPN), osteocalcin (OCN), osterix (OSX), and bone sialoprotein (BSP) were immunolocalized around PGP 9.5 positive neurovascular bundles in MP. SEM and STEM revealed a wide range of nano/micro particulates in dentin tubules and spherulitic mineral aggregates in the collagen with intrafibrillar mineral surrounding neurovascular bundles. EDX and μXRF showed elevated counts of Ca, P, Mg, and Zn inside pulp and at the dentin-pulp interface (DPI) in the DPC.

Conclusion

Colocalization of physical and chemical, and biomolecular compositions in MP suggest primary and secondary biomineralization pathways in pulp and dentin at a tissue level, and altered fluid dynamics at an organ level. Elevated counts of Zn at the mineralizing front in MP indicated its role in pulp biomineralization. These observations underpin the inherent mechano- and chemo-responsiveness of the neurovascular DPC and help elucidate the clinical subtleties related to pulpitis, dentin-bridge, and pulp stone formation.

Recent Advances in Direct Adhesive Restoration Resin-Based Dental Materials With Remineralizing Agents

Resin-based dental materials are popular restorative materials especially in direct adhesive restoration because of the excellent mechanical and esthetic properties. Toward the realization of minimally invasive dental procedures, direct composite resin adhesive restoration has become the main treatment for dental defects. In addition, for caries-affected dentin close to the pulp, conservation remineralization has been advocated to save the living pulp. However, the resin–dentin interface can be destabilized by various factors, especially the enzymatic degradation of collagen fibrils within the hybrid layer and polymer hydrolysis. Furthermore, for resin-based restorative materials, the marginal gap remains a major problem that can lead to the occurrence of secondary caries. To address these issues, research efforts have focused on the remineralization of mineral-depleted dental hard tissues using remineralizing bioactive substances. In this review, we first described various bioactive agents with remineralizing properties. Furthermore, we discussed recent advances in resin-based dental materials for enamel or dentin remineralization. Finally, we examined the current challenges and prospects of these emerging materials. This work aims to provide a theoretical foundation for the future development of resin-based dental materials in direct adhesive restoration with remineralizing agents.

Dual Functions of MDP Monomer with De- and Remineralizing Ability

Methacryloyloxydecyl dihydrogen phosphate (MDP) has been speculated to induce mineralization, but there has been no convincing evidence of its ability to induce intrafibrillar mineralization. Polymers play a critical role in biomimetic mineralization as stabilizers/inducers of amorphous precursors. Hence, MDP-induced biomimetic mineralization without polymer additives has not been fully verified or elucidated. By combining 3-dimensional stochastic optical reconstruction microscopy, surface zeta potentials, contact angle measurements, inductively coupled plasma-optical emission spectroscopy, transmission electron microscopy, atomic force microscopy, and Fourier transform infrared spectroscopy with circular dichroism, we show that amphiphilic MDP can not only demineralize dentin by releasing protons as an acidic functional monomer but also infiltrate collagen fibrils (including dentin collagen), unwind the triple helical structure by breaking hydrogen bonds, and finally immobilize within collagen. MDP-bound collagen functions as a huge collagenous phosphoprotein (HCPP), in contrast to chemical phosphorylation modifications. HCPP can induce biomimetic mineralization itself without polymer additives by alternatively attracting calcium and phosphate through electrostatic attraction. Therefore, we herein propose the dual functions of amphiphilic MDP monomer with de- and remineralizing ability. MDP in the free state can demineralize dentin substrates by releasing protons, whereas MDP in the collagen-bound state as HCPP can induce intrafibrillar mineralization. The dual functions of MDP monomer with de- and remineralization properties might create a new epoch in adhesive dentistry and preventive dentistry.

In Situ Crystallization of Hydroxyapatite on Carboxymethyl Cellulose as a Biomimetic Approach to Biomass-Derived Composite Materials

Nanohydroxyapatite (HAP) was crystallized in an aqueous solution of carboxymethyl cellulose (CMC) to prepare the composites of CMC and HAP with a stable interface between them with the aim of developing a sustainable tough biomass composite material inspired by bone. The temperature (room temperature to 90 °C) and the concentration of CMC (0.83-13.2 g/L) were optimized for the mechanical properties of the composites. The composite containing 67 wt % HAP prepared at 50 °C in the presence of 9.9 g/L CMC exhibited the largest flexural strength of 113 ± 2 MPa and the elastic modulus of 7.7 ± 0.3 GPa. X-ray diffraction showed that nanometer-sized HAP crystals were formed with a large aspect ratio, and energy-dispersive X-ray spectroscopy and infrared spectroscopy revealed that CMC was bound to the surface of HAP through an ionic interaction between Ca²⁺ and COO^-. Since the composite has a higher flexural strength than polyamide 6 (92 MPa) and a higher elastic modulus than polyamide 6 with 40 wt % glass fiber (5.5 GPa), it can be used as new tough biomass composite material to replace petroleum-derived engineering plastics.

Amelotin Promotes Mineralization and Adhesion in Collagen-Based Systems

Introduction

Periodontitis is characterized by the destruction of tooth-supporting tissues including the alveolar bone. Barrier membranes are used in dentistry for tissue regenerative therapy. Nevertheless, conventional membranes have issues related to membrane stability and direct induction of bone mineralization. Amelotin (AMTN), an enamel matrix protein, regulates hydroxyapatite crystal nucleation and growth. To apply an AMTN membrane in clinical practice, we investigated the mineralizing and adhesive effects of recombinant human (rh) AMTN in vitro using a collagen-based system.

Methods

Collagen hydrogel incorporated with rhAMTN (AMTN gel) and rhAMTN-coated dentin slices were prepared. AMTN gel was then applied on a commercial membrane (AMTN membrane). Samples were incubated for up to 24 h in mineralization buffer, and the structures were observed. The peak adhesive tensile strength between the dentin and AMTN membrane was measured. Using an enzyme-linked immunosorbent assay, the release kinetics of rhAMTN from the membrane were investigated.

Results

The AMTN gel resulted in the formation of hydroxyapatite deposits both onto and within the collagen matrix. Furthermore, coating the dentin surface with rhAMTN promoted the precipitation of mineral deposits on the surface. Interestingly, site-specific mineralization was observed in the AMTN membrane. Only 1% of rhAMTN was released from the membrane. Hence, the AMTN membrane adhered to the dentin surface with more than twofold greater tensile strength than that detected for a rhAMTN-free barrier membrane.

Conclusions

RhAMTN can accelerate mineralization and adhesion in collagen-based systems. Furthermore, the AMTN membrane could inform the optimal design of calcified tissue regenerative materials.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12195-022-00722-2.

Direct Phosphonylation of N-Phenyltetrahydroisoquinolines in Microdroplets

Because of their unique properties and high biological activities, organophosphorus compounds have been used worldwide in agricultural, industrial, medicinal, and veterinary applications. Conventional strategies for direct phosphonylation suffer from the usage of stoichiometric or excessive metallic or nonmetallic catalysts and long reaction times under harsh conditions, leading to a strong desire for environment-friendly protocols for phosphonylation. A protocol for the accelerated phosphonylation of N-phenyltetrahydroisoquinolines in minutes was developed without the use of any catalyst in microdroplets. The phosphonylation process was completed (>85% yields) in 10 min at 40 °C using 0.8 equiv 2,3-dicyano-5,6-dichlorobenzoquinone as the oxidant and acetonitrile as the solvent. The microdroplet phosphonylation strategy showed good suitability to alkyl phosphites and N-phenyltetrahydroisoquinolines bearing electron-withdrawing and electron-donating substitutes, and the yields of the microdroplet reaction were much greater than those of the bulk (accelerated by two orders of magnitude from the ratio of the rate constants using the microdroplet and the bulk method). Furthermore, microdroplet phosphonylation can be scaled up to a 1-phenyl-2-dimethylphosphonite-1,2,3,4-tetrahydroisoquinoline amount of 510 mg h^-1 by spraying 0.1 mol L^-1 N-phenyltetrahydroisoquinoline at 300 μL min^-1. These figures of merit make it a promising alternative to classic organic methodologies for the synthesis of organophosphorus compounds.

Inorganic phosphate in growing calcium carbonate abalone shell suggests a shared mineral ancestral precursor

The presence of phosphate from different origins (inorganic, bioorganic) is found more and more in calcium carbonate-based biominerals. Phosphate is often described as being responsible for the stabilization of the transient amorphous calcium carbonate phase. In order to specify the composition of the mineral phase deposited at the onset of carbonated shell formation, the present study investigates, down to the nanoscale, the growing shell from the European abalone Haliotis tuberculata, using a combination of solid state nuclear magnetic resonance, scanning transmission electron microscope and spatially-resolved electron energy loss spectroscopy techniques. We show the co-occurrence of inorganic phosphate with calcium and carbonate throughout the early stages of abalone shell formation. One possible hypothesis is that this first-formed mixed mineral phase represents the vestige of a shared ancestral mineral precursor that appeared early during Evolution. In addition, our findings strengthen the idea that the final crystalline phase (calcium carbonate or phosphate) depends strongly on the nature of the mineral-associated proteins in vivo.

Phosphate involvement in calcium carbonate biominerals raises questions on biomineralisation pathways. Here, the authors explore the presence of phosphate in the growing shell of the European abalone and suggest a shared mixed mineral ancestral precursor with final crystal phase being selected by mineral-associated proteins.

Phosphorylated and Phosphonated Low-Complexity Protein Segments for Biomimetic Mineralization and Repair of Tooth Enamel

Biomimetic mineralization based on self-assembly has made great progress, providing bottom-up strategies for the construction of new organic-inorganic hybrid materials applied in the treatment of hard tissue defects. Herein, inspired by the cooperative effects of key components in biomineralization microenvironments, a new type of biocompatible peptide scaffold based on flexibly self-assembling low-complexity protein segments (LCPSs) containing phosphate or phosphonate groups is developed. These LCPSs can retard the transformation of amorphous calcium phosphate into hydroxyapatite (HAP), leading to merged mineralization structures. Moreover, the application of phosphonated LCPS over phosphorylated LCPS can prevent hydrolysis by phosphatases that are enriched in extracellular mineralization microenvironments. After being coated on the etched tooth enamel, these LCPSs facilitate the growth of HAP to generate new enamel layers comparable to the natural layers and mitigate the adhesion of Streptococcus mutans. In addition, they can effectively stimulate the differentiation pathways of osteoblasts. These results shed light on the potential biomedical applications of two LCPSs in hard tissue repair.

Understanding the Adhesion Mechanism of Hydroxyapatite-Binding Peptide

Understanding the interactions between the protein collagen and hydroxyapatite is of high importance for understanding biomineralization and bone formation. Here, we undertook a reductionist approach and studied the interactions between a short peptide and hydroxyapatite. The peptide was selected from a phage-display library for its high affinity to hydroxyapatite. To study its interactions with hydroxyapatite, we performed an alanine scan to determine the contribution of each residue. The interactions of the different peptide derivatives were studied using a quartz crystal microbalance with dissipation monitoring and with single-molecule force spectroscopy by atomic force microscopy. Our results suggest that the peptide binds via electrostatic interactions between cationic moieties of the peptide and the negatively charged groups on the crystal surface. Furthermore, our findings show that cationic residues have a crucial role in binding. Using molecular dynamics simulations, we show that the peptide structure is a contributing factor to the adhesion mechanism. These results suggest that even small conformational changes can have a significant effect on peptide adhesion. We suggest that a bent structure of the peptide allows it to strongly bind hydroxyapatite. The results presented in this study improve our understanding of peptide adhesion to hydroxyapatite. On top of physical interactions between the peptide and the surface, peptide structure contributes to adhesion. Unveiling these processes contributes to our understanding of more complex biological systems. Furthermore, it may help in the design of de novo peptides to be used as functional groups for modifying the surface of hydroxyapatite.

Tannic acid induces dentin biomineralization by crosslinking and surface modification

It is currently known that crosslinking agents can effectively improve the mechanical properties of dentin by crosslinking type I collagen. However, few scholars have focused on the influence of crosslinking agents on the collagen-mineral interface after crosslinking. Analysis of the Fourier transform infrared spectroscopy (FTIR) results showed that hydrogen bonding occurs between the tannic acid (TA) molecule and the collagen. The crosslinking degree of TA to collagen reached a maximum 41.28 ± 1.52. This study used TA crosslinked collagen fibers to successfully induce dentin biomineralization, and the complete remineralization was achieved within 4 days. The crosslinking effect of TA can improve the mechanical properties and anti-enzyme properties of dentin. The elastic modulus (mean and standard deviation) and hardness values of the remineralized dentin pretreated with TA reached 19.1 ± 1.12 GPa and 0.68 ± 0.06 GPa, respectively, which were close to those of healthy dentin measurements, but significantly higher than those of dentin without crosslinking (8.91 ± 1.82 GPa and 0.16 ± 0.01 GPa). The interface energy between the surface of collagen fibers and minerals decreased from 10.59 mJ m^-2 to 4.19 mJ m^-2 with the influence of TA. The current work reveals the importance of tannic acid crosslinking for dentin remineralization while providing profound insights into the interfacial control of biomolecules in collagen mineralization.

Varying Synthesis Conditions and Comprehensive Characterization of Fluorine-Doped Hydroxyapatite Nanocrystals in a Simulated Body Fluid

Bone supports animal bodies, is the place where blood is produced, and is essential for the immune system, among other important functions. The dominant inorganic component in bone is hydroxyapatite (Hap), the structure and dynamics of which still pose many unsolved puzzles. An updated understanding of HAp is of great significance to osteology, dentistry, and the development of artificial bone and other biomaterials. In this work, HAp nanoparticles were synthesized with the wet chemical precipitation method and their structure and morphologies were controlled by varying pH and adding fluoride ions by two different routes: (1) fluoride ions were added during synthesis, and (2) fluoride ions were introduced after the samples were synthesized by soaking the samples in solutions with fluoride ions. XRD and HRTEM were employed to confirm the composition and structure, while various multinuclear (1H, 19F, 31P) solid-state nuclear magnetic resonance (NMR) methods including 1D single pulse, cross-polarization under magic-angle spinning (CPMAS), and 2D heteronuclear correlation (HETCOR) were used to characterize the structure, morphology, and dynamics, validating the general core-shell morphology in these F-HAp samples. It was found that all hydroxide ions were substituted when the fluoride ion concentration was above 0.005 M. An NMR peak corresponding to water structure emerged and the bulk water peak was shifted upfield, indicating that fluoride substitution modifies both the crystalline core and the amorphous shell of F-HAp nanoparticles. With the second route of fluoride substitution, increases in soaking time or fluoride ion concentration could increase fluoride substitution in HAp, but could not achieve complete substitution. Finally, with 1H-31P CPMAS and HETCOR, it was established that there are two types of phosphorous, one in the crystalline core (PO43−) and the other in the amorphous shell (HPO42−). These results are valuable for clarifying the fluoride substitution mechanism in HAp in biomaterials or in organisms, and provide insights for developing next generation replacement materials for bone, tooth, or coating films, drug delivery systems, etc.

I2-mediated Csp2–P bond formation via tandem cyclization of o-alkynylphenyl isothiocyanates with organophosphorus esters

A highly efficient molecular-iodine-catalyzed cascade cyclization reaction has been developed, creating a series of 4H-benzo[d][1,3]thiazin-2-yl phosphonates in moderate to excellent yields. This approach benefits from metal-free catalysts and available raw materials.

Silver(i)-catalyzed dehydrogenative cross-coupling of 2-aroylbenzofurans with phosphites

The silver(i)-catalyzed dehydrogenative cross-coupling reaction of 2-aroylbenzofurans with phosphites to afford 2-aroyl-3-phosphonylbenzofurans is reported.

Nickel-Catalyzed Paired Electrochemical Cross-Coupling of Aryl Halides with Nucleophiles

Electrochemistry has recently gained increased attention as a versatile strategy for achieving challenging transformations at the forefront of synthetic organic chemistry. However, most electrochemical transformations only employ one electrode (anodic oxidation or cathodic reduction) to afford the desired products, while the chemistry that occurs at the counter electrode yields stoichiometric waste. In contrast, paired electrochemical reactions can synchronously utilize the anodic and cathodic reactions to deliver the desired product, thus improving the atom economy and energy efficiency of the electrolytic process. This review gives an overview of recent advances in nickel-catalyzed paired electrochemical cross-coupling reactions of aryl/alkenyl halides with different nucleophiles.

1 Introduction

2 Nickel-Catalyzed Cross-Coupling Reactions

2.1 C–C Bond Formation

2.2 C–N Bond Formation

2.3 C–S/O Bond Formation

2.4 C–P Bond Formation

3 Conclusion

Advances in biomineralization-inspired materials for hard tissue repair

Biomineralization is the process by which organisms form mineralized tissues with hierarchical structures and excellent properties, including the bones and teeth in vertebrates. The underlying mechanisms and pathways of biomineralization provide inspiration for designing and constructing materials to repair hard tissues. In particular, the formation processes of minerals can be partly replicated by utilizing bioinspired artificial materials to mimic the functions of biomolecules or stabilize intermediate mineral phases involved in biomineralization. Here, we review recent advances in biomineralization-inspired materials developed for hard tissue repair. Biomineralization-inspired materials are categorized into different types based on their specific applications, which include bone repair, dentin remineralization, and enamel remineralization. Finally, the advantages and limitations of these materials are summarized, and several perspectives on future directions are discussed.

Effect of Amelotin on Bone Growth in the Murine Calvarial Defect Model

Amelotin (AMTN) is a protein that is expressed during the maturation of dental enamel and has important role in enamel hydroxyapatite mineralization. However, it is not well understood whether AMTN has a strong mineral-promoting ability in bone. In this study, the effect of AMTN on bone healing was investigated using mice calvarial defect model in vivo, and the expression of bone marker genes and cell proliferation were investigated to clarify the role of AMTN in bone mineralization using mouse osteogenic cells (MC3T3-E1) in vitro. Collagen membranes, with or without recombinant human (rh) AMTN, were applied to calvarial defects created on the parietal bones of C57BL/6N mice. Microcomputed tomography and histological observation revealed that the defect largely filled with mineralized tissue by the rhAMTN-containing membrane in eight weeks. Moreover, CD31 positive cells were observed in the newly formed mineralized tissue and around the rhAMTN-containing membrane. In the presence of rhAMTN, the expression of the Spp1 gene in MC3T3-E1 cells significantly increased within ten days in an osteoinductive medium. Moreover, rhAMTN significantly enhanced MC3T3-E1 cell proliferation. These findings indicate that AMTN positively influences bone repair by promoting hydroxyapatite mineralization.

Enzymatic Approach in Calcium Phosphate Biomineralization: A Contribution to Reconcile the Physicochemical with the Physiological View

Biomineralization is the process by which organisms produce hard inorganic matter from soft tissues with outstanding control of mineral deposition in time and space. For this purpose, organisms deploy a sophisticated "toolkit" that has resulted in significant evolutionary innovations, for which calcium phosphate (CaP) is the biomineral selected for the skeleton of vertebrates. While CaP mineral formation in aqueous media can be investigated by studying thermodynamics and kinetics of phase transitions in supersaturated solutions, biogenic mineralization requires coping with the inherent complexity of biological systems. This mainly includes compartmentalization and homeostatic processes used by organisms to regulate key physiological factors, including temperature, pH and ion concentration. A detailed analysis of the literature shows the emergence of two main views describing the mechanism of CaP biomineralization. The first one, more dedicated to the study of in vivo systems and supported by researchers in physiology, often involves matrix vesicles (MVs). The second one, more investigated by the physicochemistry community, involves collagen intrafibrillar mineralization particularly through in vitro acellular models. Herein, we show that there is an obvious need in the biological systems to control both where and when the mineral forms through an in-depth survey of the mechanism of CaP mineralization. This necessity could gather both communities of physiologists and physicochemists under a common interest for an enzymatic approach to better describe CaP biomineralization. Both homogeneous and heterogeneous enzymatic catalyses are conceivable for these systems, and a few preliminary promising results on CaP mineralization for both types of enzymatic catalysis are reported in this work. Through them, we aim to describe the relevance of our point of view and the likely findings that could be obtained when adding an enzymatic approach to the already rich and creative research field dealing with CaP mineralization. This complementary approach could lead to a better understanding of the biomineralization mechanism and inspire the biomimetic design of new materials.

Spatial-Temporal Patterns and Inflammatory Factors of Bone Matrix Remodeling

The bone extracellular matrix (ECM) contains organic and mineral constituents. The establishment and degradation processes of ECM connect with spatial and temporal patterns, especially circadian rhythms in ECM. These patterns are responsible for the physical and biological characteristics of bone. The disturbances of the patterns disrupt bone matrix remodeling and cause diverse bone diseases, such as osteogenesis imperfecta (OI) and bone fracture. In addition, the main regulatory factors and inflammatory factors also follow circadian rhythms. Studies show that the circadian oscillations of these factors in bone ECM potentially influence the interactions between immune responses and bone formation. More importantly, mesenchymal stem cells (MSCs) within the specific microenvironments provide the regenerative potential for tissue remodeling. In this review, we summarize the advanced ECM spatial characteristics and the periodic patterns of bone ECM. Importantly, we focus on the intrinsic connections between the immunoinflammatory system and bone formation according to circadian rhythms of regulatory factors in bone ECM. And our research group emphasizes the multipotency of MSCs with their microenvironments. The advanced understandings of bone ECM formation patterns and MSCs contribute to providing optimal prevention and treatment strategies.

Vibrational Study on Structure and Bioactivity of Protein Fibers Grafted with Phosphorylated Methacrylates

In the last decades, silk fibroin and wool keratin have been considered functional materials for biomedical applications. In this study, fabrics containing silk fibers from Bombyx mori and Tussah silk fibers from Antheraea pernyi, as well as wool keratin fabrics, were grafted with phosmer CL and phosmer M (commercial names, i.e., methacrylate monomers containing phosphate groups in the molecular side chain) with different weight gains. Both phosmers were recently proposed as flame retarding agents, and their chemical composition suggested a possible application in bone tissue engineering. IR and Raman spectroscopy were used to disclose the possible structural changes induced by grafting and identify the most reactive amino acids towards the phosmers. The same techniques were used to investigate the nucleation of a calcium phosphate phase on the surface of the samples (i.e., bioactivity) after ageing in simulated body fluid (SBF). The phosmers were found to polymerize onto the biopolymers efficiently, and tyrosine and serine underwent phosphorylation (monitored through the strengthening of the Raman band at 1600 cm-1 and the weakening of the Raman band at 1400 cm-1, respectively). In grafted wool keratin, cysteic acid and other oxidation products of disulphide bridges were detected together with sulphated residues. Only slight conformational changes were observed upon grafting, generally towards an enrichment in ordered domains, suggesting that the amorphous regions were more prone to react (and, sometimes, degrade). All samples were shown to be bioactive, with a weight gain of up to 8%. The most bioactive samples contained the highest phosmers amounts, i.e., the highest amounts of phosphate nucleating sites. The sulphate/sulphonate groups present in grafted wool samples appeared to increase bioactivity, as shown by the five-fold increase of the IR phosphate band at 1040 cm-1.

The Physiological and Pathological Role of Tissue Nonspecific Alkaline Phosphatase beyond Mineralization

Tissue-nonspecific alkaline phosphatase (TNAP) is a key enzyme responsible for skeletal tissue mineralization. It is involved in the dephosphorylation of various physiological substrates, and has vital physiological functions, including extra-skeletal functions, such as neuronal development, detoxification of lipopolysaccharide (LPS), an anti-inflammatory role, bile pH regulation, and the maintenance of the blood brain barrier (BBB). TNAP is also implicated in ectopic pathological calcification of soft tissues, especially the vasculature. Although it is the crucial enzyme in mineralization of skeletal and dental tissues, it is a logical clinical target to attenuate vascular calcification. Various tools and studies have been developed to inhibit its activity to arrest soft tissue mineralization. However, we should not neglect its other physiological functions prior to therapies targeting TNAP. Therefore, a better understanding into the mechanisms mediated by TNAP is needed for minimizing off targeted effects and aid in the betterment of various pathological scenarios. In this review, we have discussed the mechanism of mineralization and functions of TNAP beyond its primary role of hard tissue mineralization.

Biomineralization from the Perspective of Ion Aggregation: Calcium Phosphate Nucleation in the Physiological Environment

Biomineralization is an important process of bone tissue generation. Calcium (Ca) and phosphate (P) ions aggregate and nucleate under the regulation of biomolecules at the initial mineralization stage. Due to the complexity of the physiological environment, the movement behavior and mineralization mechanism of calcium and phosphate ions, as well as the effect of biomolecules on them, are not clear. In this study, computer simulations and experimental verification were applied to investigate the characteristics of the initial biomineralization from the view of ion aggregation and nucleation. The results prove that P ions play a more important role in mineralization than Ca ions. The guanidyl group and surrounding carboxyl terminal groups are a potential excellent nucleation domain on proteins. The interval distribution of acidic/basic residues on protein is more conductive to the formation of large Ca and P ions clusters. The involvement of protein could increase the probability of hydroxyapatite phase precipitation, especially in the presence of a helical conformation. The detailed information on Ca and P ions behavior provided by the computer simulations is helpful for further understanding the mechanism of biomineralization, which will promote the development of bone repair materials to the biomimetic mineralized materials.

Refined Structures of O-Phospho-l-serine and Its Calcium Salt by New Multinuclear Solid-State NMR Crystallography Methods

O-phospho-l-serine (Pser) and its Ca salt, Ca[O-phospho-l-serine]·H2O (CaPser), play important roles for bone mineralization and were recently also proposed to account for the markedly improved bone-adhesive properties of Pser-doped calcium phosphate-based cements for biomedical implants. However, the hitherto few proposed structural models of Pser and CaPser were obtained by X-ray diffraction, thereby leaving the proton positions poorly defined. Herein, we refine the Pser and CaPser structures by density functional theory (DFT) calculations and contrast them with direct interatomic-distance constraints from two-dimensional (2D) nuclear magnetic resonance (NMR) correlation experimentation at fast magic-angle spinning (MAS), encompassing double-quantum-single-quantum (2Q-1Q) 1H NMR along with heteronuclear 13C{1H} and 31P{1H} correlation NMR experiments. The Pser and CaPser structures before and after refinements by DFT were validated against sets of NMR-derived effective 1H-1H, 1H-31P, and 1H-13C distances, which confirmed the improved accuracy of the refined structures. Each distance set was derived from one sole 2D NMR experiment applied to a powder without isotopic enrichment. The distances were extracted without invoking numerical spin-dynamics simulations or approximate phenomenological models. We highlight the advantages and limitations of the new distance-extraction procedure. Isotropic 1H, 13C, and 31P chemical shifts obtained by DFT calculations using the gauge including projector augmented wave (GIPAW) method agreed very well with the experimental results. We discuss the isotropic and anisotropic 13C and 31P chemical-shift parameters in relation to the previous literature, where most data on CaPser are reported herein for the first time.

Effects of bioactive glass with high phosphorus content on mineralization of type I collagen fibrils

PURPOSE

To study effects of bioactive glass with high phosphorus content (10.8% P₂O₅, 54.2% SiO₂, 35% CaO, mol%, named PSC) on mineralization of type I collagen fibrils.

METHODS

(1) PSC, and PSC combining 0.1 mg/mL, 0.5 mg/mL, or 1.0 mg/mL polyacrylic acid (PAA), were used to induce the mineralization of self-assembled type I collagen fibrils. After 3 and 7 days of mineralization, collagen fibrils were observed by transmission electron microscopy (TEM) and selected area electron diffraction (SAED). (2) PSC suspension was dialyzed in simulated body fluid (SBF), or in SBF containing 0.1 mg/mL, 0.5 mg/mL, or 1.0 mg/mL PAA, to form amorphous calcium phosphate (ACP), then observed by TEM.

RESULTS

(1) PSC and PSC combining 0.1 mg/mL or 0.5 mg/mL PAA induced mainly extrafibrillar mineralization. PSC combining 1.0 mg/mL PAA induced both extrafibrillar and intrafibrillar mineralization. (2) The ACP induced by PSC or PSC combining 0.1 mg/mL PAA partly formed lattice structure after 24 h. The particle size of the ACP induced by PSC combining 0.5 mg/mL PAA was 100-150 nm, and that induced by PSC combining 1.0 mg/mL PAA was 30-50 nm.

CONCLUSION

PSC induced mainly extrafibrillar mineralization, and PSC combining an appropriate concentration (1.0 mg/mL) of PAA induced both extrafibrillar and intrafibrillar mineralization.

Biomineralization of Enamel and Dentin Mediated by Matrix Proteins

Biomineralization of enamel, dentin, and bone involves the deposition of apatite mineral crystals within an organic matrix. Bone and teeth are classic examples of biomaterials with unique biomechanical properties that are crucial to their function. The collagen-based apatite mineralization and the important function of noncollagenous proteins are similar in dentin and bone; however, enamel is formed in a unique amelogenin-containing protein matrix. While the structure and organic composition of enamel are different from those of dentin and bone, the principal molecular mechanisms of protein-protein interactions, protein self-assembly, and control of crystallization events by the organic matrix are common among these apatite-containing tissues. This review briefly summarizes enamel and dentin matrix components and their interactions with other extracellular matrix components and calcium ions in mediating the mineralization process. We highlight the crystallization events that are controlled by the protein matrix and their interactions in the extracellular matrix during enamel and dentin biomineralization. Strategies for peptide-inspired biomimetic growth of tooth enamel and bioinspired mineralization of collagen to stimulate repair of demineralized dentin and bone tissue engineering are also addressed.

Four Simple Biomimetic Mineralization Methods to Improve the Thermostability and Immunogenicity of Virus-like Particles as a Vaccine against Foot-and-Mouth Disease

The need for a cold chain system during storage and transport substantially increases the cost of vaccines. Virus-like particles (VLPs) are among the best countermeasures against foot and mouth disease virus (FMDV). However, VLPs are composed of pure proteins, and thus, are susceptible to heat. To address this problem, four simple biomimetic mineralization methods with the use of calcium phosphate were developed to improve heat tolerance via biomineralization. The results showed that biomineralization can significantly improve the heat resistance of VLPs. The biomineralized VLPs can be stored at low as 25 °C for eight days, and 37 °C for four days. Animal experiments showed that biomineralization had no effect on the immunogenicity of VLPs or the expression of specific antibodies (Abs) and neutralizing Abs. Even after heat treatment at 37 °C for four days, the biomineralized VLPs remained immunogenic and produced highly specific and neutralizing Abs with a high rate of protection. These results suggest that these biomineralization approaches can promote the thermal stability of VLPs against and significantly reduce dependence on cold storage and delivery systems.

An Insight into Nano Silver Fluoride-Coated Silk Fibroin Bioinspired Membrane Properties for Guided Tissue Regeneration

The current work focuses on the development of a novel electrospun silk fibroin (SF) nonwoven mat as a GTR membrane with antibacterial, biomineralization and biocompatible properties. The γ-poly glutamic acid (γ-PGA)-capped nano silver fluoride (NSF) and silver diamine fluoride (SDF) were first synthesized, which were dip-coated onto electrospun silk fibroin mats (NSF-SF and SDF-SF). UV-Vis spectroscopy and TEM depicted the formation of silver nanoparticles. NSF-SF and SDF-SF demonstrated antibacterial properties (against Porphyromonas gingivalis) with 3.1 and 6.7 folds higher relative to SF, respectively. Post-mineralization in simulated body fluid, the NSF-SF effectively promoted apatite precipitation (Ca/P ~1.67), while the SDF-SF depicted deposition of silver nanoparticles, assessed by SEM-EDS. According to the FTIR-ATR deconvolution analysis, NSF-SF portrayed ~75% estimated hydroxyapatite crystallinity index (CI), whereas pure SF and SDF-SF demonstrated ~60%. The biocompatibility of NSF-SF was ~82% when compared to the control, while SDF-coated samples revealed in vitro cytotoxicity, further needing in vivo studies for a definite conclusion. Furthermore, the NSF-SF revealed the highest tensile strength of 0.32 N/mm and 1.76% elongation at break. Therefore, it is substantiated that the novel bioactive and antibacterial NSF-SF membranes can serve as a potential candidate, shedding light on further in-depth analysis for GTR applications.

Calcification-Based Cancer Diagnosis and Therapy

In nature, calcium deposition is a common biological process in mammals that shapes mechanical structures and creates the functions of bones and teeth, and causes calculi formation. Spontaneous tumor calcification and regional lymph node calcification in colorectal cancer, lung cancer, and glioblastoma have been proven to be benign prognostic factors in the clinic. In line with this concept, we introduce the idea and lead the compound development of artificially inducing bionic calcification around the surface of cancer cells. This process is shown to have excellent effects in the inhibition of growth and metastases of cervical, breast, and lung tumors, as well as superb performance in early-stage diagnosis. Therefore, we predict that this concept may open the door for cancer targeting calcification therapy and diagnosis and provide an outlook for a new avenue in anticancer drug development.

Copper-Catalyzed Enaminone C(sp2)-N Bond Phosphonation for Stereoselective Synthesis of Alkenylphosphonates

A direct enaminone C-N bond coupling functionalization that generates a new C-P bond using dialkyl phosphonate for the efficient and stereoselective synthesis of (E)-alkenylphosphonates is reported. The reactions toward target products proceed well with a broad scope, disclosing a valuable new synthetic application of enaminones by the interesting C(sp²)-N bond elaboration.

Palladium-Catalyzed Cascade Difluoroalkylation and Phosphinoylation of 2-Vinyloxy Arylalkynes: Selective Synthesis of Difluoroalkyl-Containing Tetrasubstituted Alkenylphosphine Oxides

A Pd-catalyzed difluoroalkylation/cyclization/phosphinoylation of 2-vinyloxy arylalkynes with ethyl difluoroiodoacetate and diarylphosphine oxides has been successfully developed. This reaction allows the formation of C_sp3-CF₂, C_sp3-C_sp2, and C_sp2-P(O) bonds in one step, providing a straightforward route to difluoroalkyl-containing tetrasubstituted alkenylphosphine oxides with complete stereoselectivities under mild conditions.

Review: Post-translational modifications of marine shell matrix proteins

Shell matrix proteins (SMPs) are key components for the Mollusk shell biomineralization. SMPs function has been hypothesized in several proteins by bioinformatics analysis, and through in vitro crystallization assays. However, studies of the post-translational modifications (PTMs) of SMPs, which contribute to their structure and the function, are limited. This review provides the current status of the SMPs with the most common PTMs described (glycosylation, phosphorylation, and disulfide bond formation) and their role in shell biomineralization. Also, recent studies based on recombinant production of SMPs are discussed. Finally, recommendations for the study of SMPs and their PTMs are provided. The review showed that PTMs are widely distributed in SMPs, and their presence on SMPs may contribute to the modulation of their activity in some SMPs, contributing to the crystal growth formation and differentiation through different mechanisms, however, in a few cases the lack of the PTMs do not alter their inherent function.

Experimental Dental Composites Containing a Novel Methacrylate-Functionalized Calcium Phosphate Component: Evaluation of Bioactivity and Physical Properties

The aim of this study was to synthesize and characterize a novel methacrylate-functionalized calcium phosphate (MCP) to be used as a bioactive compound for innovative dental composites. The characterization was accomplished by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The incorporation of MCP as a bioactive filler in esthetic dental composite formulations and the ability of MCP containing dental composites to promote the precipitation of hydroxyapatite (HAp) on the surfaces of those dental composites was explored. The translucency parameter, depth of cure, degree of conversion, ion release profile, and other physical properties of the composites were studied with respect to the amount of MCP added to the composites. Composite with 3 wt.% MCP showed the highest flexural strength and translucency compared to the control composite and composites with 6 wt.% and 20 wt.% MCP. The progress of the surface precipitation of hydroxyapatite on the MCP containing dental composites was studied by systematically increasing the MCP content in the composite and the time of specimen storage in Dulbecco's phosphate-buffered solution with calcium and magnesium. The results suggested that good bioactivity properties are exhibited by MCP containing composites. A direct correlation between the percentage of MCP in a composite formulation, the amount of time the specimen was stored in PBS, and the deposition of hydroxyapatite on the composite's surface was observed.