Electronic design criteria for O-O bond formation via metal-oxo complexes

O-O Bond Formation and Liberation of Dioxygen Mediated by N5 -Coordinate Non-Heme Iron(IV) Complexes

Formation of the O-O bond is considered the critical step in oxidative water cleavage to produce dioxygen. High-valent metal complexes with terminal oxo (oxido) ligands are commonly regarded as instrumental for oxygen evolution, but direct experimental evidence is lacking. Herein, we describe the formation of the O-O bond in solution, from non-heme, N5 -coordinate oxoiron(IV) species. Oxygen evolution from oxoiron(IV) is instantaneous once meta-chloroperbenzoic acid is administered in excess. Oxygen-isotope labeling reveals two sources of dioxygen, pointing to mechanistic branching between HAT (hydrogen atom transfer)-initiated free-radical pathways of the peroxides, which are typical of catalase-like reactivity, and iron-borne O-O coupling, which is unprecedented for non-heme/peroxide systems. Interpretation in terms of [FeIV (O)] and [FeV (O)] being the resting and active principles of the O-O coupling, respectively, concurs with fundamental mechanistic ideas of (electro-) chemical O-O coupling in water oxidation catalysis (WOC), indicating that central mechanistic motifs of WOC can be mimicked in a catalase/peroxidase setting.

How Metal Ion Lewis Acidity and Steric Properties Influence the Barrier to Dioxygen Binding, Peroxo O-O Bond Cleavage, and Reactivity

Herein we quantitatively investigate how metal ion Lewis acidity and steric properties influence the kinetics and thermodynamics of dioxygen binding versus release from structurally analogous Mn-O₂ complexes, as well as the barrier to Mn peroxo O-O bond cleavage, and the reactivity of Mn oxo intermediates. Previously we demonstrated that the steric and electronic properties of Mn^III-OOR complexes containing N-heterocyclic (N^Ar) ligand scaffolds can have a dramatic influence on alkylperoxo O-O bond lengths and the barrier to alkylperoxo O-O bond cleavage. Herein, we examine the dioxygen reactivity of a new Mn^II complex containing a more electron-rich, less sterically demanding N^Ar ligand scaffold, and compare it with previously reported Mn^II complexes. Dioxygen binding is shown to be reversible with complexes containing the more electron-rich metal ions. The kinetic barrier to O₂ binding and peroxo O-O bond cleavage is shown to correlate with redox potentials, as well as the steric properties of the supporting N^Ar ligands. The reaction landscape for the dioxygen chemistry of the more electron-rich complexes is shown to be relatively flat. A total of four intermediates, including a superoxo and peroxo species, are observed with the most electron-rich complex. Two new intermediates are shown to form following the peroxo, which are capable of cleaving strong X-H bonds. In the absence of a sacrificial H atom donor, solvent, or ligand, serves as a source of H atoms. With TEMPOH as sacrificial H atom donor, a deuterium isotope effect is observed (k_H/k_D = 3.5), implicating a hydrogen atom transfer (HAT) mechanism. With 1,4-cyclohexadiene, 0.5 equiv of benzene is produced prior to the formation of an EPR detected Mn^IIIMn^IV bimetallic species, and 0.5 equiv after its formation.

Geometric and electronic structure of a crystallographically characterized thiolate-ligated binuclear peroxo-bridged cobalt(III) complex

In order to shed light on metal-dependent mechanisms for O-O bond cleavage, and its microscopic reverse, we compare herein the electronic and geometric structures of O2-derived binuclear Co(III)- and Mn(III)-peroxo compounds. Binuclear metal peroxo complexes are proposed to form as intermediates during Mn-promoted photosynthetic H2O oxidation, and a Co-containing artificial leaf inspired by nature's photosynthetic H2O oxidation catalyst. Crystallographic characterization of an extremely activated peroxo is made possible by working with substitution-inert, low-spin Co(III). Density functional theory (DFT) calculations show that the frontier orbitals of the Co(III)-peroxo compound differ noticeably from the analogous Mn(III)-peroxo compound. The highest occupied molecular orbital (HOMO) associated with the Co(III)-peroxo is more localized on the peroxo in an antibonding π*(O-O) orbital, whereas the HOMO of the structurally analogous Mn(III)-peroxo is delocalized over both the metal d-orbitals and peroxo π*(O-O) orbital. With low-spin d6 Co(III), filled t2g orbitals prevent π-back-donation from the doubly occupied antibonding π*(O-O) orbital onto the metal ion. This is not the case with high-spin d4 Mn(III), since these orbitals are half-filled. This weakens the peroxo O-O bond of the former relative to the latter.

Joint Theoretical and Experimental Study on the La Doping Process in In2O3: Phase Transition and Electrocatalytic Activity

In₂O₃ and La³⁺-doped In₂O₃ nanostructures were synthesized through a facile and fast chemical route based on the microwave-assisted hydrothermal method combined with rapid thermal treatment in a microwave oven. The presence of the La³⁺ doping process modifies the size and morphology of the In₂O₃ nanostructures and also stabilizes the rhombohedral (rh) In₂O₃ phase with respect to the most stable cubic (bcc) polymorph. X-ray diffraction (XRD) patterns and Rietveld refinements, Raman, UV-vis, and energy dispersive X-ray (EDX) spectroscopies, transmission electron (TEM) and field-emission scanning electron (FE-SEM) microscopies, as well as PL emissions have been performed. To complement and rationalize the experimental results, first-principle calculations, based on density functional theory, are carried out to obtain the formation energies of the In₂O₃ and bcc- and rh-In₂O₃-doped phases, their geometry and electronic properties. Theoretical results are able to explain the relative stabilization of the rh-phase with respect to the bcc-phase based on the analysis geometry changes and the electronic redistribution induced by the La³⁺ doping process. In addition, Wulff construction is employed to match the theoretical and experimental morphologies of the cubic phase. The synthesized samples were applied for the O₂ evolution reaction (OER). The La³⁺-doped In₂O₃ film presents superior electrocatalytic activity, with an onset potential lower than the undoped In₂O₃ film that can be associated with the increase in electron density caused by the La³⁺ doping process. This study provides a versatile strategy for obtaining In₂O₃ and La³⁺-doped In₂O₃ nanostructures for practical applications.

Recent Advances in Oxygen Electrocatalysts Based on Perovskite Oxides

Electrochemical oxygen reduction and oxygen evolution are two key processes that limit the efficiency of important energy conversion devices such as metal–air battery and electrolysis. Perovskite oxides are receiving discernable attention as potential bifunctional oxygen electrocatalysts to replace precious metals because of their low cost, good activity, and versatility. In this review, we provide a brief summary on the fundamentals of perovskite oxygen electrocatalysts and a detailed discussion on emerging high-performance oxygen electrocatalysts based on perovskite, which include perovskite with a controlled composition, perovskite with high surface area, and perovskite composites. Challenges and outlooks in the further development of perovskite oxygen electrocatalysts are also presented.

A Terminal FeIII-Oxo in a Tetranuclear Cluster: Effects of Distal Metal Centers on Structure and Reactivity

Tetranuclear Fe clusters have been synthesized bearing a terminal Fe^III-oxo center stabilized by hydrogen-bonding interactions from pendant ( tert-butylamino)pyrazolate ligands. This motif was supported in multiple Fe oxidation states, ranging from [Fe^II₂Fe^III₂] to [Fe^III₄]; two oxidation states were structurally characterized by single-crystal X-ray diffraction. The reactivity of the Fe^III-oxo center in proton-coupled electron transfer with X-H (X = C, O) bonds of various strengths was studied in conjunction with analysis of thermodynamic square schemes of the cluster oxidation states. These results demonstrate the important role of distal metal centers in modulating the reactivity of a terminal metal-oxo.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Ru-bda: Unique Molecular Water-Oxidation Catalysts with Distortion Induced Open Site and Negatively Charged Ligands

A water-oxidation catalyst with high intrinsic activity is the foundation for developing any type of water-splitting device. To celebrate its 10 years anniversary, in this Perspective we focus on the state-of-the-art molecular water-oxidation catalysts (MWOCs), the Ru-bda series (bda = 2,2'-bipyridine-6,6'-dicarboxylate), to offer strategies for the design and synthesis of more advanced MWOCs. The O-O bond formation mechanisms, derivatives, applications, and reasons behind the outstanding catalytic activities of Ru-bda catalysts are summarized and discussed. The excellent performance of the Ru-bda catalyst is owing to its unique structural features: the distortion induced 7-coordination and the carboxylate ligands with coordination flexibility, proton-transfer function as well as small steric hindrance. Inspired by the Ru-bda catalysts, we emphasize that the introduction of negatively charged groups, such as the carboxylate group, into ligands is an effective strategy to lower the onset potential of MWOCs. Moreover, distortion of the regular configuration of a transition metal complex by ligand design to generate a wide open site as the catalytic site for binding the substrate as an extra-coordination is proposed as a new concept for the design of efficient molecular catalysts. These inspirations can be expected to play a great role in not only water-oxidation catalysis but also other small molecule activation and conversion reactions involving artificial photosynthesis, such as CO₂ reduction and N₂ fixation reactions.

Mastering Surface Reconstruction of Metastable Spinel Oxides for Better Water Oxidation

Developing highly active electrocatalysts for oxygen evolution reaction (OER) is critical for the effectiveness of water splitting. Low-cost spinel oxides have attracted increasing interest as alternatives to noble metal-based OER catalysts. A rational design of spinel catalysts can be guided by studying the structural/elemental properties that determine the reaction mechanism and activity. Here, using density functional theory (DFT) calculations, it is found that the relative position of O p-band and M_Oh (Co and Ni in octahedron) d-band center in ZnCo_{2- x} Ni_x O₄ (x = 0-2) correlates with its stability as well as the possibility for lattice oxygen to participate in OER. Therefore, it is testified by synthesizing ZnCo_{2- x} Ni_x O₄ spinel oxides, investigating their OER performance and surface evolution. Stable ZnCo_{2- x} Ni_x O₄ (x = 0-0.4) follows adsorbate evolving mechanism under OER conditions. Lattice oxygen participates in the OER of metastable ZnCo_{2- x} Ni_x O₄ (x = 0.6, 0.8) which gives rise to continuously formed oxyhydroxide as surface-active species and consequently enhances activity. ZnCo_1.2 Ni_0.8 O₄ exhibits performance superior to the benchmarked IrO₂ . This work illuminates the design of highly active metastable spinel electrocatalysts through the prediction of the reaction mechanism and OER activity by determining the relative positions of the O p-band and the M_Oh d-band center.

H/D Isotope Effects Reveal Factors Controlling Catalytic Activity in Co-Based Oxides for Water Oxidation

Understanding the mechanism for electrochemical water oxidation is important for the development of more efficient catalysts for artificial photosynthesis. A basic step is the proton-coupled electron transfer, which enables accumulation of oxidizing equivalents without buildup of a charge. We find that substituting deuterium for hydrogen resulted in an 87% decrease in the catalytic activity for water oxidation on Co-based amorphous-oxide catalysts at neutral pH, while ¹⁶O-to-¹⁸O substitution lead to a 10% decrease. In situ visible and quasi-in situ X-ray absorption spectroscopy reveal that the hydrogen-to-deuterium isotopic substitution induces an equilibrium isotope effect that shifts the oxidation potentials positively by approximately 60 mV for the proton coupled Co^II/III and Co^III/IV electron transfer processes. Time-resolved spectroelectrochemical measurements indicate the absence of a kinetic isotope effect, implying that the precatalytic proton-coupled electron transfer happens through a stepwise mechanism in which electron transfer is rate-determining. An observed correlation between Co oxidation states and catalytic current for both isotopic conditions indicates that the applied potential has no direct effect on the catalytic rate, which instead depends exponentially on the average Co oxidation state. These combined results provide evidence that neither proton nor electron transfer is involved in the catalytic rate-determining step. We propose a mechanism with an active species composed by two adjacent Co^IV atoms and a rate-determining step that involves oxygen-oxygen bond formation and compare it with models proposed in the literature.

An Overview of Significant Achievements in Ruthenium-Based Molecular Water Oxidation Catalysis

Fossil fuels (coal, oil, natural gas) are becoming increasingly disfavored as long-term energy options due to concerns of scarcity and environmental consequences (e.g., release of anthropogenic CO₂). Hydrogen gas, on the other hand, has gained popularity as a clean-burning fuel because the only byproduct from its reaction with O₂ is H₂O. In recent decades, hydrogen derived from water splitting has been a topic of extensive research. The bottleneck of the water splitting reaction is the difficult water oxidation step (2H₂O → O₂ + 4H⁺ + 4e⁻), which requires an effective and robust catalyst to overcome its high kinetic barrier. Research in water oxidation by molecular ruthenium catalysts enjoys a rich history spanning nearly 40 years. As the diversity of novel ligands continues to widen, the relationship between ligand geometry or electronics, and catalyst activity is undoubtedly becoming clearer. The present review highlights, in the authors’ opinion, some of the most impactful discoveries in the field and explores the evolution of ligand design that has led to the current state of the art.

Homogeneous photochemical water oxidation with metal salophen complexes in neutral media

The development of water oxidation catalysts based on Earth-abundant metals that can function at neutral pH remains a basic chemical challenge.

Reactive Cobalt⁻Oxo Complexes of Tetrapyrrolic Macrocycles and N-based Ligand in Oxidative Transformation Reactions

High-valent cobalt–oxo complexes are reactive transient intermediates in a number of oxidative transformation processes e.g., water oxidation and oxygen atom transfer reactions. Studies of cobalt–oxo complexes are very important for understanding the mechanism of the oxygen evolution center in natural photosynthesis, and helpful to replicate enzyme catalysis in artificial systems. This review summarizes the development of identification of high-valent cobalt–oxo species of tetrapyrrolic macrocycles and N-based ligands in oxidation of organic substrates, water oxidation reaction and in the preparation of cobalt–oxo complexes.

Direct oxygen isotope effect identifies the rate-determining step of electrocatalytic OER at an oxidic surface

Understanding the mechanism of water oxidation to dioxygen represents the bottleneck towards the design of efficient energy storage schemes based on water splitting. The investigation of kinetic isotope effects has long been established for mechanistic studies of various such reactions. However, so far natural isotope abundance determination of O₂ produced at solid electrode surfaces has not been applied. Here, we demonstrate that such measurements are possible. Moreover, they are experimentally simple and sufficiently accurate to observe significant effects. Our measured kinetic isotope effects depend strongly on the electrode material and on the applied electrode potential. They suggest that in the case of iron oxide as the electrode material, the oxygen evolution reaction occurs via a rate-determining O−O bond formation via nucleophilic water attack on a ferryl unit.

Understanding reaction mechanisms is crucial for catalyst design. Here, natural-abundance isotope quantifications of O₂ yield mechanistically significant reaction kinetic isotope effects for water oxidation over metal oxide electrodes, the bottleneck step of water electrolysis.

Isolation of a Terminal Co(III)-Oxo Complex

Late transition metal oxo complexes with high d-electron counts have been implicated as intermediates in a wide variety of important catalytic reactions; however, their reactive nature has often significantly limited their study. While some examples of these species have been isolated and characterized, complexes with d-electron counts >4 are exceedingly rare. Here we report that use of a strongly donating tris(imidazol-2-ylidene)borate scaffold enables the isolation of two highly unusual Co^III-oxo complexes which have been thoroughly characterized by a suite of physical techniques including single crystal X-ray diffraction. These complexes display O atom and H atom transfer reactivity and demonstrate that terminal metal oxo complexes with six d-electrons can display strong metal-oxygen bonding and sufficient stability to enable their characterization. The unambiguous assignment of these complexes supports the viability of related species that are frequently invoked, but rarely observed, in the types of catalytic reactions mentioned above. The studies described here change our understanding of the reactivity and bonding in late transition metal oxo complexes and open the door to further study of the properties of this class of elusive and important intermediates.

Chemical Activity of the Peroxide/Oxide Redox Couple: Case Study of Ba5Ru2O11 in Aqueous and Organic Solvents

The finding that triggering the redox activity of oxygen ions within the lattice of transition metal oxides can boost the performances of materials used in energy storage and conversion devices such as Li-ion batteries or oxygen evolution electrocatalysts has recently spurred intensive and innovative research in the field of energy. While experimental and theoretical efforts have been critical in understanding the role of oxygen nonbonding states in the redox activity of oxygen ions, a clear picture of the redox chemistry of the oxygen species formed upon this oxidation process is still missing. This can be, in part, explained by the complexity in stabilizing and studying these species once electrochemically formed. In this work, we alleviate this difficulty by studying the phase Ba₅Ru₂O₁₁, which contains peroxide O₂^2- groups, as oxygen evolution reaction electrocatalyst and Li-ion battery material. Combining physical characterization and electrochemical measurements, we demonstrate that peroxide groups can easily be oxidized at relatively low potential, leading to the formation of gaseous dioxygen and to the instability of the oxide. Furthermore, we demonstrate that, owing to the stabilization at high energy of peroxide, the high-lying energy of the empty σ* antibonding O-O states limits the reversibility of the electrochemical reactions when the O₂^2-/O^2- redox couple is used as redox center for Li-ion battery materials or as OER redox active sites. Overall, this work suggests that the formation of true peroxide O₂^2- states are detrimental for transition metal oxides used as OER catalysts and Li-ion battery materials. Rather, oxygen species with O-O bond order lower than 1 would be preferred for these applications.

Synergy between Fe and Ni in the optimal performance of (Ni,Fe)OOH catalysts for the oxygen evolution reaction

The oxygen evolution reaction (OER) is critical to solar production of fuels, but the reaction mechanism underlying the performance for a best OER catalyst, Fe-doped NiOOH [(Ni,Fe)OOH], remains highly controversial. We used grand canonical quantum mechanics to predict the OER mechanisms including kinetics and thus overpotentials as a function of Fe content in (Ni,Fe)OOH catalysts. We find that density functional theory (DFT) without exact exchange predicts that addition of Fe does not reduce the overpotential much. However, DFT with exact exchange predicts dramatic improvement in performance for (Ni,Fe)OOH, leading to an overpotential of 0.42 V and a Tafel slope of 23 mV/decade (dec), in good agreement with experiments, 0.3-0.4 V and 30 mV/dec. We reveal that the high spin [Formula: see text] Fe(IV) leads to efficient formation of an active O radical intermediate, while the closed shell [Formula: see text] Ni(IV) catalyzes the subsequent O-O coupling, and thus it is the synergy between Fe and Ni that delivers the optimal performance for OER.

Structurally characterized terminal manganese(iv) oxo tris(alkoxide) complex

First structurally characterized Mn(iv) oxo.

A Mn(iv) complex featuring a terminal oxo ligand, [Mn^IV(O)(ditox)₃][K(15-C-5)₂] (3; ditox = ^tBu₂MeCO^–, 15-C-5 = 15-crown-5-ether) has been isolated and structurally characterized. Treatment of the colorless precursor [Mn^II(ditox)₃][K(15-C-5)₂] (2) with iodosobenzene affords 3 as a green free-flowing powder in high yields. The X-ray crystal structure of 3 reveals a pseudotetrahedral geometry about the central Mn, which features a terminal oxo (d(Mn–O_term = 1.628(2) Å)). EPR spectroscopy, SQUID magnetometry, and Evans method magnetic susceptibility indicate that 3 consists of a high-spin S = 3/2 Mn(iv) metal center. 3 promotes C–H bond activation by a hydrogen atom abstraction. The [Mn^IV(O)(ditox)₃]^– furnishes a model for the proposed terminal oxo of the unique manganese of the oxygen evolving complex of photosystem II.

Novel Fully Organic Water Oxidation Electrocatalysts: A Quest for Simplicity

Despite the growing need for readily available and inexpensive catalysts for the half-reactions involved in water splitting, water oxidation and reduction electrocatalysts are still traditionally based on noble metals. One long-standing challenge has been the development of an oxygen evolution reaction catalyzed by easily available, structurally simple, and purely organic compounds. Herein, we first generalize the performance of the known N-ethyl-flavinium ion to a number of derivatives. Furthermore, we demonstrate an unprecedented application of different pyridinium and related salts as very simple, inexpensive water oxidation organocatalysts consisting of earth-abundant elements (C, H, O, and N) exclusively. The results establish the prospects of heterocyclic aromatics for further design of new organic electrocatalysts for this challenging oxidation reaction.

N-Atom transfer via thermal or photolytic activation of a Co-azido complex with a PNP pincer ligand

Thermal or photolytic activation of well-defined mononuclear [Co(N₃)(PNP)] (PNP = 2,2'-bis(diisopropylphosphino)-4,4'-ditolylamido) results in the structurally characterized dinuclear species [Co(μ-N;κ³-P,N,N-PN^PN)]₂ (3), with two N-bridging phosphiniminato bridgeheads. Density Functional Theory (DFT) calculations indicate the intermediacy of a mononuclear cobalt-nitrido complex, followed by N-migratory insertion into a Co-P bond. Reaction of 3 with two equiv. HCl leads to rupture of the dimer with formation of mononuclear [CoCl(PN^PN^H)] (4) by protonation of the N-bridges.

How to tame a palladium terminal oxo

The isolation of terminal oxo complexes of the late transition metals promises new avenues in oxidation catalysis like the selective and catalytic hydroxylation of unreactive CH bonds, the activation of water, or the upgrading of olefins. While terminal oxo ligands are ubiquitous for early transition metals, well-characterized examples with group 10 metals remain hitherto elusive. In search for palladium terminal oxo complexes, the relative stability/reactivity of such compounds are evaluated computationally (CASSCF/NEVPT2; DFT). The calculations investigate only well-known ligand systems with established synthetic procedures and relevance for coordination chemistry and homogeneous catalysis. They delineate and quantify, which electronic properties of ancillary ligands are crucial for taming otherwise highly reactive terminal oxo intermediates. Notably, carbene ligands with both strong σ-donor and strong π-acceptor properties are best suited for the stabilization of palladium(ii) terminal oxo complexes, whereas ligands with a weaker ligand field lead to highly reactive complexes. Strongly donating ligands are an excellent choice for high-valent palladium(iv) terminal oxo compounds. Low coordinate palladium(ii) as well as high-valent palladium(iv) complexes are best suited for the activation of strong bonds.

Electrochemical oxygen evolution reaction catalyzed by a novel nickel–cobalt-fluoride catalyst

The nickel–cobalt-fluoride catalyst is a kind of novel and efficient non-precious catalyst for the oxygen evolution reaction.

Ultra-thin wrinkled NiOOH–NiCr2O4 nanosheets on Ni foam: an advanced catalytic electrode for oxygen evolution reaction

NiOOH–NiCr₂O₄/NF shows high activity for the OER in alkaline media, achieving a catalytic current density of 20 mA cm⁻² at an overpotential of 271 mV.

Cooperative bimetallic reactivity of a heterodinuclear molybdenum–copper model of Mo–Cu CODH

Modeling the reactivity of Mo–Cu CODH: Cu(i) brings the substrate close to Mo–oxo and develops electrophilic character in CO carbon.

Synergistic effects of plasmon induced Ag@Ag3VO4/ZnCr LDH ternary heterostructures towards visible light responsive O2 evolution and phenol oxidation reactions

The SPR effect of monodisperse Ag nanoparticles in Ag@Ag₃VO₄/ZnCr LDH heterostructures exhibits high photocatalytic activity towards evolution of O₂ and oxidation of phenol.

Intramolecular C-H and C-F Bond Oxygenation by Site-Differentiated Tetranuclear Manganese Models of the OEC

The dangler manganese center in the oxygen-evolving complex (OEC) of photosystem II plays an important role in the oxidation of water to dioxygen. Inspired by the structure of the OEC, we synthesized a series of site-differentiated tetra-manganese clusters [LMn3(PhPz)3OMn][OTf]x (2: x = 2; 3: x = 1) that features an apical manganese ion-distinct from the others-that is appended to a trinuclear manganese core through an μ4-oxygen atom bridge. This cluster design was targeted to facilitate studies of high-valent Mn-oxo formation, which is a proposed step in the mechanism for water oxidation by the OEC. Terminal Mn-oxo species-supported by a multinuclear motif-were targeted by treating 2 and 3 with iodosobenzene. Akin to our previously reported iron complexes, intramolecular arene hydroxylation was observed to yield the C-H bond oxygenated complexes [LMn3(PhPz)2(OArPz)OMn][OTf]x (5: x = 2; 6: x = 1). The fluorinated series [LMn3(F2ArPz)3OMn][OTf]x (8: x = 2; 9: x = 1) was also synthesized to mitigate the observed intramolecular hydroxylation. Treatment of 8 and 9 with iodosobenzene results in intramolecular arene C-F bond oxygenation as judged by electrospray ionization mass spectrometry. The observed aromatic C-H and C-F hydroxylation is suggestive of a putative high-valent terminal metal-oxo species, and it is one of the very few examples capable of oxygenating C-F bonds.

Chemical Recognition of Active Oxygen Species on the Surface of Oxygen Evolution Reaction Electrocatalysts

Owing to the transient nature of the intermediates formed during the oxygen evolution reaction (OER) on the surface of transition metal oxides, their nature remains largely elusive by the means of simple techniques. The use of chemical probes is proposed, which, owing to their specific affinities towards different oxygen species, unravel the role played by these species on the OER mechanism. For that, tetraalkylammonium (TAA) cations, previously known for their surfactant properties, are introduced, which interact with the active oxygen sites and modify the hydrogen bond network on the surface of OER catalysts. Combining chemical probes with isotopic and pH-dependent measurements, it is further demonstrated that the introduction of iron into amorphous Ni oxyhydroxide films used as model catalysts deeply modifies the proton exchange properties, and therefore the OER mechanism and activity.

Core-shell CoFe2O4@Co-Fe-Bi nanoarray: a surface-amorphization water oxidation catalyst operating at near-neutral pH

The exploration of high-performance and earth-abundant water oxidation catalysts operating under mild conditions is highly attractive and challenging. In this communication, core-shell CoFe₂O₄@Co-Fe-Bi nanoarray on carbon cloth (CoFe₂O₄@Co-Fe-Bi/CC) was successfully fabricated by in situ surface amorphization of CoFe₂O₄ nanoarray on CC (CoFe₂O₄/CC). As a 3D water oxidation electrode, CoFe₂O₄@Co-Fe-Bi/CC shows outstanding activity with an overpotential of 460 mV to drive a geometrical catalytic current density of 10 mA cm^-2 in 0.1 M potassium borate (pH 9.2). Notably, it also demonstrates superior long-term durability for at least 20 h with 96% Faradic efficiency. Density functional theory calculations indicate that the conversion from OOH* to O₂ is the rate-limiting step and the high water oxidation activity of CoFe₂O₄@Co-Fe-Bi/CC is associated with the lower free energy of 1.84 eV on a Co-Fe-Bi shell.

Amorphous Cobalt Phyllosilicate with Layered Crystalline Motifs as Water Oxidation Catalyst

The development of a high-performance oxygen evolution reaction (OER) catalyst is pivotal for the practical realization of a water-splitting system. Although an extensive search for OER catalysts has been performed in the past decades, cost-effective catalysts remain elusive. Herein, an amorphous cobalt phyllosilicate (ACP) with layered crystalline motif prepared by a room-temperature precipitation is introduced as a new OER catalyst; this material exhibits a remarkably low overpotential (η ≈ 367 mV for a current density of 10 mA cm^-2 ). A structural investigation using X-ray absorption spectroscopy reveals that the amorphous structure contains layered motifs similar to the structure of CoOOH, which is demonstrated to be responsible for the OER catalysis based on density functional theory calculations. However, the calculations also reveal that the local environment of the active site in the layered crystalline motif in the ACP is significantly modulated by the silicate, leading to a substantial reduction of η of the OER compared with that of CoOOH. This work proposes amorphous phyllosilicates as a new group of efficient OER catalysts and suggests that tuning of the catalytic activity by introducing redox-inert groups may be a new unexplored avenue for the design of novel high-performance catalysts.