Catalytic role of gold in gold-based catalysts: a density functional theory study on the CO oxidation on gold

Mechanistic investigations of the Au catalysed C-H bond activations in on-surface synthesis

Recently, Au-based nanostructures have attracted extensive interest due to their excellent activities in heterogeneous catalysis. The reaction mechanisms have been interpreted qualitatively by the quantum confinement effect due to the low-coordination of Au atoms in nanostructures. In this work, systematic first-principles calculations were carried out to obtain an in-depth understanding of the origin of C-H bond activations with Au-based catalysts in on-surface synthesis. Combining density functional theory (DFT) calculations and scanning tunneling microscopy (STM) studies, we reveal that the d-band centre and the d-band width of the Au-5dz2 orbital in an energy window of -6.80 to 0.00 eV may serve as theoretical descriptors for the prediction of the activity of Au catalysts in C-H bond activations. This work may therefore inspire further investigations on the design of new catalysts.

Surface premelting/recrystallization governing the collapse of open-cell nanoporous Cu via thermal annealing

We systematically investigate the collapse of a set of open-cell nanoporous Cu (np-Cu) materials with the same porosity and shape but different specific surface areas, during thermal annealing, by performing large-scale molecular dynamics simulations. Two mechanisms govern the collapse of np-Cu. One is direct surface premelting, facilitating the collapse of np-Cu, when the specific surface area is less than a critical value (∼2.38 nm-1). The other is recrystallization followed by surface premelting, accelerating the sloughing of ligaments and the annihilation of voids, when the critical specific surface area is exceeded. Surface premelting results from surface reconstruction by prompting localized "disordering" and "chaos" on the surface, and the melting temperature reduces linearly with the increase of the specific surface area. Recrystallization is followed by surface premelting as the melting temperature is below the supercooling point, where a liquid is unstable and instantaneously recrystallizes.

First Principles Study on the CO Oxidation on Mn-Embedded Divacancy Graphene

The CO oxidation mechanism on graphene with divacancy (DG) embedded with transition metal from Sc to Zn has been studied by using first principles calculations. The results indicate that O₂ molecule is preferentially adsorbed on Sc, Ti, V, Cr, Mn, and Fe-DG, which can avoid the CO poisoning problem that many catalysts facing and is beneficial to the CO oxidation progress. Further study indicates that Mn-DG shows the best catalytic properties for CO oxidation with consideration of both Langmuir-Hinshelwood (LH) and Eley-Rideal (ER) oxidation mechanisms. Along the ER mechanism, the reaction energy barrier for the first step (CO _free + O_{2pre-adsorbed} → OOCO) is 0.96 eV. Along the LH mechanism, the energy barrier for the rate limiting step (CO _adsorbed + O_2adsorbed → OOCO) is only 0.41 eV, indicating that the CO oxidation on Mn-DG will occur along LH mechanism. The Hirshfeld charge distributions of O₂ and CO molecules is tuned by the embedded Mn atom, and the charge transfer from the embedded Mn atom to the adsorbed molecules plays an important role for the CO oxidation. The result shows that the Mn-embedded divacancy graphene is a noble-metal free and efficient catalyst for CO oxidation at low temperature.

Optimum Particle Size for Gold-Catalyzed CO Oxidation

The structure sensitivity of gold-catalyzed CO oxidation is presented by analyzing in detail the dependence of CO oxidation rate on particle size. Clusters with less than 14 gold atoms adopt a planar structure, whereas larger ones adopt a three-dimensional structure. The CO and O₂ adsorption properties depend strongly on particle structure and size. All of the reaction barriers relevant to CO oxidation display linear scaling relationships with CO and O₂ binding strengths as main reactivity descriptors. Planar and three-dimensional gold clusters exhibit different linear scaling relationship due to different surface topologies and different coordination numbers of the surface atoms. On the basis of these linear scaling relationships, first-principles microkinetics simulations were conducted to determine CO oxidation rates and possible rate-determining step of Au particles. Planar Au₉ and three-dimensional Au₇₉ clusters present the highest CO oxidation rates for planar and three-dimensional clusters, respectively. The planar Au₉ cluster is much more active than the optimum Au₇₉ cluster. A common feature of optimum CO oxidation performance is the intermediate binding strengths of CO and O₂, resulting in intermediate coverages of CO, O₂, and O. Both these optimum particles present lower performance than maximum Sabatier performance, indicating that there is sufficient room for improvement of gold catalysts for CO oxidation.

CO oxidation on Ru-Pt bimetallic nanoclusters supported on TiO2(101): The effect of charge polarization

Pt-based catalyst is widely used in CO oxidation, while its catalytic activity is often undermined because of the CO poisoning effect. Here, using density functional theory, we propose the use of a Ru-Pt bimetallic cluster supported on TiO₂ for CO oxidation, to achieve both high activity and low CO poisoning effect. Excellent catalytic activity is obtained in a Ru₁Pt₇/TiO₂(101) system, which is ascribed to strong electric fields induced by charge polarization between one Ru atom and its neighboring Pt atoms. Because of its lower electronegativity, the Ru atom donates electrons to neighboring Pt. This induces strong electric fields around the top-layered Ru, substantially promoting the adsorption of O₂/CO + O₂ and eliminating the CO poisoning effect. In addition, the charge polarization also drives the d-band center of the Ru₁Pt₇ cluster to up-shift to the Fermi level. For surface O₂ activation/CO oxidation, the strong electric field and d-band center close to the Fermi level can promote the adsorption of O₂ and CO as well as reduce the reaction barrier of the rate-determining step. Meanwhile, since O₂ easily dissociates on Ru₁Pt₇/TiO₂(101) resulting in unwanted oxidation of Ru and Pt, a CO-rich condition is necessary to protect the catalyst at high temperature.

Trends in water-promoted oxygen dissociation on the transition metal surfaces from first principles

Dissociation of O₂ into atomic oxygen is a significant route for O₂ activation in metal-catalyzed oxidation reactions. In this study, we systematically investigated the mechanisms of O₂ dissociation and the promoting role of water on nine transition metal (Co, Rh, Ir, Ni, Pd, Pt, Cu, Ag, and Au) surfaces. It was found that on clean metal surfaces, the dissociation of O₂ was most favorable on Co(0001) and most difficult on Au(111), according to the free energy barriers of Co (0.03 eV) < Rh (0.20 eV) < Ni (0.26 eV) < Cu (0.45 eV) < Ir (0.62 eV) < Pd (0.65 eV) < Pt (0.92 eV) < Ag (1.07 eV) < Au (2.50 eV). With the involvement of water, O₂ and H₂O formed an O₂H₂O complex via hydrogen bonding interactions, being accompanied by an increased co-adsorption free energy of 0.17-0.52 eV and a more activated O-O bond. More importantly, the introduction of water reduced the barriers of O₂ dissociation on all the nine metal surfaces, with the reduction of the free energy barrier ranging from 0.03 eV on Co(0001) to 1.05 eV on Au(111). The intrinsic reasons for the promotional role of water are attributed to the hydrogen bonding effect between O₂ and H₂O and the electronic modification effect induced by the water-surface interaction. These results provide a fundamental understanding of the catalytic role of water in O₂ dissociation on the transition metal surfaces and may be helpful in the rational design of new efficient catalysts for the oxidation reactions using molecular oxygen or air.

Combinatorial selection of a two-dimensional 3d-TM-tetracyanoquinodimethane (TM-TCNQ) monolayer as a high-activity nanocatalyst for CO oxidation

CO catalytic oxidation on Sc-TCNQ.

CO adsorption and oxygen activation on group 11 nanoparticles – a combined DFT and high level CCSD(T) study about size effects and activation processes

The focus of this study lies in the activation of molecular oxygen and reaction with CO within density functional theory (DFT) and high level CCSD(T) calculations.

Catalytic CO oxidation on B-doped and BN co-doped penta-graphene: a computational study

The catalytic reaction of carbon monoxide oxidation on boron-doped and boron–nitrogen co-doped penta-graphene materials has been systematically studied by utilizing spin-polarized density functional theory (DFT) calculations.

Estimation of electric field effects on the adsorption of molecular superoxide species on Au based on density functional theory

Superoxide species are key intermediates in the oxygen reduction reactions (ORR) that occur at the cathodes of aprotic metal-air batteries. Herein we report a DFT study of the effects of an externally applied electric field (ε) on the stability of various molecular superoxide species, including MO₂ (M = Li, Na, K) and O₂^-, on gold surfaces, which shows that the stability of such species on Au electrodes can be materially affected by the presence of an electric field and solvent molecules, suggesting that such effects should be included in the first-principles modeling of cathode reactions in metal-O₂ cells. In the ε range of ±0.4 V Å^-1, the stability of MO₂ species is found to vary by up to |0.4| eV on Au(111) and |0.2| eV on Au(211) in vacuo, which is larger than the field effects on the stability of O and OH, key intermediates in the ORR by hydrogen. An aprotic solvent such as dimethyl sulfoxide (DMSO), considered here via the inclusion of explicit DMSO molecules above the Au surfaces, stabilizes all three MO₂ species at zero fields and amplifies the field effects on the stability of MO₂, on both Au surfaces. The variations in the stability of the molecular MO₂ species with ε, which have small polarizabilities, are closely approximated by the first-order Stark effect (μ₀·ε, where μ₀ is the static surface dipole moment induced by adsorption at ε = 0 V Å^-1). The superoxide anion (O₂^-) that has been identified on an under-coordinated Au site has a larger polarizability than the MO_x species and a μ₀ that is opposite in sign to those of the metal MO₂ species, which results in larger errors by the first-order approximation, although its stability varies only moderately under positive electric fields of up to 0.4 V Å^-1.

Parametric Studies of Titania-Supported Gold-Catalyzed Oxidation of Carbon Monoxide

This paper remarks the general correlations of the shape and crystallinity of titanium dioxide (TiO₂) support on gold deposition and carbon monoxide (CO) oxidation. It was found that due to the larger rutile TiO₂ particles and thus the pore volume, the deposited gold particles tended to agglomerate, resulting in smaller catalyst surface area and limited gold loading, whilst anatase TiO₂ enabled better gold deposition. Those properties directly related to gold particle size and thus the number of low coordinated atoms play dominant roles in enhancing CO oxidation activity. Gold deposited on anatase spheroidal TiO₂ at photo-deposition wavelength of 410 nm for 5 min resulted in the highest CO oxidation activity of 0.0617 mmol CO/s.g_Au (89.5% conversion) due to the comparatively highest catalyst surface area (114.4 m²/g), smallest gold particle size (2.8 nm), highest gold loading (7.2%), and highest Au⁰ content (68 mg/g catalyst). CO oxidation activity was also found to be directly proportional to the Au⁰ content. Based on diffuse reflectance infrared Fourier transform spectroscopy, we postulate that anatase TiO₂-supported Au undergoes rapid direct oxidation whilst CO oxidation on rutile TiO₂-supported Au could be inhibited by co-adsorption of oxygen.

Ru-Catalyzed Steam Methane Reforming: Mechanistic Study from First Principles Calculations

Elucidating the reaction mechanism of steam methane reforming (SMR) is imperative for the rational design of catalysts for efficient hydrogen production. In this paper, we provide mechanistic insights into SMR on Ru surface using first principles calculations based on dispersion-corrected density functional theory. Methane activation (i.e., C-H bond cleavage) was found to proceed via a thermodynamically exothermic dissociative adsorption process, resulting in (CH _y + zH)* species ("*" denotes a surface-bound state, and y + z = 4), with C* and CH* being the most stable adsorbates. The calculation of activation barriers suggests that the conversion of C* into O-containing species via C-O bond formation is kinetically slow, indicating that the surface reaction of carbon intermediates with oxygen is a possible rate-determining step. The results suggest the importance of subsequent elementary reactions following methane activation in determining the formation of stable carbon structures on the surface that deactivates the catalyst or the conversion of carbon into O-containing species.

Reactivity of 4Fe+(CO)n=0-2 + O2: oxidation of CO by O2 at an isolated metal atom

The kinetics of ⁴Fe⁺(CO)_n=0-2 + O₂ are measured under thermal conditions from 300-600 K using a selected-ion flow tube apparatus. Both the bare metal and n = 2 cations are inert to reaction over this temperature range, but ⁴Fe⁺(CO) reacts rapidly (k = 3.2 ± 0.8 × 10^-10 cm³ s^-1 at 300 K, 52% of the collisional rate coefficient) to form FeO⁺ + CO₂. This is an example of the oxidation of CO by O₂ occurring entirely on a single non-noble metal atom. The reaction of the bare metal reaction is known to be endothermic, such that this result is expected; however, the n = 2 reaction has highly exothermic product channels available, such that the lack of reaction is surprising in light of the n = 1 reactivity. Stationary points along all three reaction coordinates are calculated using the TPSSh hybrid functional. These surfaces show that the n = 1 reaction is an example of two-state reactivity; the reaction proceeds initially on the sextet surface over a submerged barrier to a structure with an O-O bond distance longer than that in O₂, but must cross to the quartet surface in order to proceed over a second submerged barrier to rearrange to form CO₂. The n = 2 reaction does not proceed because, on all spin surfaces, the transition state corresponding to O-O separation is at higher energy than the separated reactants. The difference between the n = 1 and n = 2 reactions is not a result of steric effects, but rather because the O₂ is more strongly bound to Fe in the entrance well of the n = 1 case, and that energy is available to overcome the rate-limiting barrier to O-O cleavage. Experimental verification of some of these details are provided by guided ion beam tandem mass spectrometry results. The kinetic energy dependence of the n = 1 reaction shows evidence for a curve crossing and yields relevant thermochemistry for competing reaction channels.

Identification of activity trends for CO oxidation on supported transition-metal single-atom catalysts

Identification of activity trends for CO oxidation on transition-metal single-atom catalysts by using E_ad(CO) and E_ad(O₂) as descriptors.

Theoretical investigation of CO catalytic oxidation by a Fe–PtSe2 monolayer

Theoretical prediction of efficient catalytic CO oxidation over a Fe–PtSe₂ monolayer.

The effect of defects on the catalytic activity of single Au atom supported carbon nanotubes and reaction mechanism for CO oxidation

The mechanism of CO oxidation by O₂ on a single Au atom supported on pristine, mono atom vacancy (m), di atom vacancy (di) and the Stone Wales defect (SW) on single walled carbon nanotube (SWCNT) surface is systematically investigated theoretically using density functional theory.

CO oxidation on Rh-doped hexadecagold clusters

Exploring the unique catalytic properties of gold clusters associated with specific nano-architectures is essential for designing improved catalysts with a high mass-specific activity.

Catalytic reduction of NO by CO molecules over Ni-doped graphene: a DFT investigation

A Ni-doped graphene nanosheet is used as an efficient catalyst for the reduction of NO by CO molecules.

A promising single atom catalyst for CO oxidation: Ag on boron vacancies of h-BN sheets

Due to “CO-Promoted O₂ Activation”, the termolecular Eley–Rideal (TER) mechanism is the most relevant one for CO oxidation over the SAC, Ag₁/BN.

A First-Principle Study of Synergized O2 Activation and CO Oxidation by Ag Nanoparticles on TiO2(101) Support

We performed density functional theory (DFT) calculations to investigate the synergized O2 activation and CO oxidation by Ag8 cluster on TiO2(101) support. The excellent catalytic activity of the interfacial Ag atoms in O2 dissociation is ascribed to the positive polarized charges, upshift of Ag d-band center, and assistance of surface Ti5c atoms. CO oxidation then takes place via a two-step mechanism coupled with O2 dissociation: (i) CO + O2 → CO2 + O and (ii) CO + O → CO2. The synergistic effect of CO and O2 activations reduces the oxidation energy barrier (Ea) of reaction (i), especially for the up-layered Ag atoms not in contact with support. It is found that the coadsorbed CO and O2 on the up-layered Ag atoms form a metal-stable four-center O-O-CO structure motif substantially promoting CO oxidation. On the oxygen defective Ag8/TiO2(101) surface, because of the decreased positive charges and the down-shift of d-band centers in Ag, the metal cluster exhibits low O2 adsorption and activation abilities. Although the dissociation of O2 is facilitated by the TiO2(101) defect sites, the dissociated O atoms would cover the defects so strongly that further CO oxidation would be prohibited unless much extra energy is introduced to recreate oxygen defects.

CO oxidation catalyzed by silicon carbide (SiC) monolayer: A theoretical study

Developing metal-free catalysts for CO oxidation has been a key scientific issue in solving the growing environmental problems caused by CO emission. In this work, the potential of the silicon carbide (SiC) monolayer as a metal-free catalyst for CO oxidation was systematically explored by means of density functional theory (DFT) computations. Our results revealed that CO oxidation reaction can easily proceed on SiC nanosheet, and a three-step mechanism was proposed: (1) the coadsorption of CO and O2 molecules, followed by (2) the formation of the first CO2 molecule, and (3) the recovery of catalyst by a second CO molecule. The last step is the rate-determining one of the whole catalytic reaction with the highest barrier of 0.65eV. Remarkably, larger curvature is found to have a negative effect on the catalytic performance of SiC nanosheet for CO oxidation. Therefore, our results suggested that flat SiC monolayer is a promising metal-free catalyst for CO oxidation.

Carbon monoxide oxidation catalysed by defective palladium chloride: DFT calculations, EXAFS, and in situ DRIRS measurements

We examined the potential catalytic role of the palladium chloride catalyst in CO oxidation using density functional theory and experimental investigations. The active plane of the palladium chloride catalyst is identified as (140). We found that the defective PdCl2(140) surface is able to facilitate the activation of O2 and subsequently promote the oxidation of CO. The most significant reaction channel, the Eley-Rideal mechanism (MER1), proceeds first by a peroxo-type (OOCO) intermediate formation, second by O adsorption with the first CO2 release, then by the second CO attraction and the second CO2 formation, and finally by the second CO2 desorption and restoration of the defective PdCl2(140) surface. The rate-determining step is the formation of the second CO2 in the whole catalytic cycle. Compared to the previously reported catalytic systems, the reaction activation barrier (0.54 eV) of CO oxidation in the PdCl2 catalyst is low, indicating PdCl2 as a potential high-performance catalyst for CO oxidation. The present results enrich our understanding of CO oxidation of Pd-based catalysts and provide a basis for fabricating Pd-based catalysts with high activity.

The CO oxidation mechanism on the W(111) surface and the W helical nanowire investigated by the density functional theory calculation

Two CO oxidation reactions (CO + O2 → CO2 + O and CO + O → CO2) were considered in the Eley-Rideal (ER) reaction mechanism. These oxidation processes on the W(111) surface and the W helical nanowire were investigated by the density functional theory (DFT) calculation. The stable adsorption sites of O2 and O as well as their adsorption energies were obtained first. In order to understand the catalytic properties of the W helical nanowire, the Fukui function and local density of state (LDOS) profiles were determined. The nudged elastic band (NEB) method was applied to locate transition states and minimum energy pathways (MEPs) of CO oxidation processes on the W helical nanowire and on the W(111) surface. In this study, we have demonstrated that the catalytic ability of the W helical nanowire is superior to that of the W(111) surface for CO oxidation.