Antibiotic recognition by binuclear metallo-beta-lactamases revealed by X-ray crystallography

His224 alters the R2 drug binding site and Phe218 influences the catalytic efficiency of the metallo-β-lactamase VIM-7

Metallo-β-lactamases (MBLs) are the causative mechanism for resistance to β-lactams, including carbapenems, in many Gram-negative pathogenic bacteria. One important family of MBLs is the Verona integron-encoded MBLs (VIM). In this study, the importance of residues Asp120, Phe218, and His224 in the most divergent VIM variant, VIM-7, was investigated to better understand the roles of these residues in VIM enzymes through mutations, enzyme kinetics, crystal structures, thermostability, and docking experiments. The tVIM-7-D120A mutant with a tobacco etch virus (TEV) cleavage site was enzymatically inactive, and its structure showed the presence of only the Zn1 ion. The mutant was less thermostable, with a melting temperature (T(m)) of 48.5°C, compared to 55.3 °C for the wild-type tVIM-7. In the F218Y mutant, a hydrogen bonding cluster was established involving residues Asn70, Asp84, and Arg121. The tVIM-7-F218Y mutant had enhanced activity compared to wild-type tVIM-7, and a slightly higher Tm (57.1 °C) was observed, most likely due to the hydrogen bonding cluster. Furthermore, the introduction of two additional hydrogen bonds adjacent to the active site in the tVIM-7-H224Y mutant gave a higher thermostability (T(m), 62.9 °C) and increased enzymatic activity compared to those of the wild-type tVIM-7. Docking of ceftazidime in to the active site of tVIM-7, tVIM-7-H224Y, and VIM-7-F218Y revealed that the side-chain conformations of residue 224 and Arg228 in the L3 loop and Tyr67 in the L1 loop all influence possible substrate binding conformations. In conclusion, the residue composition of the L3 loop, as shown with the single H224Y mutation, is important for activity particularly toward the positively charged cephalosporins like cefepime and ceftazidime.

Targeting metallo-β-lactamase enzymes in antibiotic resistance

The β-lactam antibiotics are essential for the treatment of a wide range of human bacterial diseases. However, a class of zinc-dependent hydrolases known as the metallo-β-lactamase (MBL) can confer bacteria with extended spectrum β-lactam resistance. To date, there are no clinically approved MBL inhibitors, making these enzymes a serious threat to human health. In this review, a structural approach is taken to outline some of the more promising MBL inhibitors and shed light on how the resistance conferred by this emerging class of enzymes may be circumvented in the future.

A variety of roles for versatile zinc in metallo-β-lactamases

β-Lactamases inactivate the important β-lactam antibiotics by catalysing the hydrolysis of the β-lactam ring, thus. One class of these enzymes, the metallo-β-lactamases, bind two zinc ions at the active site and these play important roles in the catalytic mechanism.

New β-phospholactam as a carbapenem transition state analog: Synthesis of a broad-spectrum inhibitor of metallo-β-lactamases

In an effort to test whether a transition state analog is an inhibitor of the metallo-β-lactamases, a phospholactam analog of carbapenem has been synthesized and characterized. The phospholactam 1 proved to be a weak, time-dependent inhibitor of IMP-1 (70%), CcrA (70%), L1 (70%), NDM-1 (53%), and Bla2 (94%) at an inhibitor concentration of 100μM. The phospholactam 1 activated ImiS and BcII at the same concentration. Docking studies were used to explain binding and to offer suggestions for modifications to the phospholactam scaffold to improve binding affinities.

Allosteric inhibition of VIM metallo-β-lactamases by a camelid nanobody

MβL (metallo-β-lactamase) enzymes are usually produced by multi-resistant Gram-negative bacterial strains and have spread worldwide. An approach on the basis of phage display was used to select single-domain antibody fragments (VHHs, also called nanobodies) that would inhibit the clinically relevant VIM (Verona integron-encoded MβL)-4 MβL. Out of more than 50 selected nanobodies, only the NbVIM_38 nanobody inhibited VIM-4. The paratope, inhibition mechanism and epitope of the NbVIM_38 nanobody were then characterized. An alanine scan of the NbVIM_38 paratope showed that its binding was driven by hydrophobic amino acids. The inhibitory concentration was in the micromolar range for all β-lactams tested. In addition, the inhibition was found to follow a mixed hyperbolic profile with a predominantly uncompetitive component. Moreover, substrate inhibition was recorded only after nanobody binding. These kinetic data are indicative of a binding site that is distant from the active site. This finding was confirmed by epitope mapping analysis that was performed using peptides, and which identified two stretches of amino acids in the L6 loop and at the end of the α2 helix. Because this binding site is distant from the active site and alters both the substrate binding and catalytic properties of VIM-4, this nanobody can be considered as an allosteric inhibitor.

Combined quantum mechanics/molecular mechanics (QM/MM) methods in computational enzymology

Computational enzymology is a rapidly maturing field that is increasingly integral to understanding mechanisms of enzyme-catalyzed reactions and their practical applications. Combined quantum mechanics/molecular mechanics (QM/MM) methods are important in this field. By treating the reacting species with a quantum mechanical method (i.e., a method that calculates the electronic structure of the active site) and including the enzyme environment with simpler molecular mechanical methods, enzyme reactions can be modeled. Here, we review QM/MM methods and their application to enzyme-catalyzed reactions to investigate fundamental and practical problems in enzymology. A range of QM/MM methods is available, from cheaper and more approximate methods, which can be used for molecular dynamics simulations, to highly accurate electronic structure methods. We discuss how modeling of reactions using such methods can provide detailed insight into enzyme mechanisms and illustrate this by reviewing some recent applications. We outline some practical considerations for such simulations. Further, we highlight applications that show how QM/MM methods can contribute to the practical development and application of enzymology, e.g., in the interpretation and prediction of the effects of mutagenesis and in drug and catalyst design.

Biapenem inactivation by B2 metallo β-lactamases: energy landscape of the hydrolysis reaction

Background

A general mechanism has been proposed for metallo β-lactamases (MβLs), in which deprotonation of a water molecule near the Zn ion(s) results in the formation of a hydroxide ion that attacks the carbonyl oxygen of the β-lactam ring. However, because of the absence of X-ray structures that show the exact position of the antibiotic in the reactant state (RS) it has been difficult to obtain a definitive validation of this mechanism.

Methodology/Principal Findings

We have employed a strategy to identify the RS, which does not rely on substrate docking and/or molecular dynamics. Starting from the X-ray structure of the enzyme:product complex (the product state, PS), a QM/MM scan was used to drive the reaction uphill from product back to reactant. Since in this process also the enzyme changes from PS to RS, we actually generate the enzyme:substrate complex from product and avoid the uncertainties associated with models of the reactant state. We used this strategy to study the reaction of biapenem hydrolysis by B2 MβL CphA. QM/MM simulations were carried out under 14 different ionization states of the active site, in order to generate potential energy surfaces (PESs) corresponding to a variety of possible reaction paths.

Conclusions/Significance

The calculations support a model for biapenem hydrolysis by CphA, in which the nucleophile that attacks the β-lactam ring is not the water molecule located in proximity of the active site Zn, but a second water molecule, hydrogen bonded to the first one, which is used up in the reaction, and thus is not visible in the X-ray structure of the enzyme:product complex.

Probing the role of Met221 in the unusual metallo-β-lactamase GOB-18

Metallo-β-lactamases (MβLs) are the main mechanism of bacterial resistance against last generation β-lactam antibiotics such as carbapenems. Most MβLs display unusual structural features in their active sites, such as binuclear zinc centers without carboxylate bridging ligands and/or a Cys ligand in a catalytic zinc site. Cys221 is an essential residue for catalysis conserved in B1 and B2 lactamases, while most B3 enzymes present a Ser in this position. GOB lactamases stand as an exception within this picture, with a Met residue in position 221. Then, we obtained a series of GOB-18 point mutants in order to analyze the role of this unusual Met221 residue. We found that Met221 is essential for the protein stability, most likely due to its involvement in a hydrophobic core. In contrast to other known MβLs, residue 221 is not involved in metal binding or in catalysis in GOB enzymes, according to spectroscopic and kinetic studies. Our findings show that the essential catalytic features are maintained despite the structural heterogeneity among MβLs and suggest that a strategy to design general inhibitors should be undertaken on the basis of mechanistic rather than structural information.

Structural insights into the subclass B3 metallo-β-lactamase SMB-1 and the mode of inhibition by the common metallo-β-lactamase inhibitor mercaptoacetate

A novel subclass B3 metallo-β-lactamase (MBL), SMB-1, recently identified from a Serratia marcescens clinical isolate, showed a higher hydrolytic activity against a wide range of β-lactams than did the other subclass B3 MBLs, i.e., BJP-1 and FEZ-1, from environmental bacteria. To identify the mechanism underlying the differences in substrate specificity among the subclass B3 MBLs, we determined the structure of SMB-1, using 1.6-Å diffraction data. Consequently, we found that SMB-1 reserves a space in the active site to accommodate β-lactam, even with a bulky R1 side chain, due to a loss of amino acid residues corresponding to F31 and L226 of BJP-1, which protrude into the active site to prevent β-lactam from binding. The protein also possesses a unique amino acid residue, Q157, which probably plays a role in recognition of β-lactams via the hydrogen bond interaction, which is missing in BJP-1 and FEZ-1, whose K(m) values for β-lactams are particularly high. In addition, we determined the mercaptoacetate (MCR)-complexed SMB-1 structure and revealed the mode of its inhibition by MCR: the thiolate group bridges to two zinc ions (Zn1 and Zn2). One of the carboxylate oxygen atoms of MCR makes contact with Zn2 and Ser221, and the other makes contact with T223 and a water molecule. Our results demonstrate the possibility that MCR could be a potent inhibitor for subclass B3 MBLs and that the screening technique using MCR as an inhibitor would be effective for detecting subclass B3 MBL producers.

Crystal structure of the mobile metallo-β-lactamase AIM-1 from Pseudomonas aeruginosa: insights into antibiotic binding and the role of Gln157

Metallo-β-lactamase (MBL) genes confer resistance to virtually all β-lactam antibiotics and are rapidly disseminated by mobile genetic elements in Gram-negative bacteria. MBLs belong to three different subgroups, B1, B2, and B3, with the mobile MBLs largely confined to subgroup B1. The B3 MBLs are a divergent subgroup of predominantly chromosomally encoded enzymes. AIM-1 (Adelaide IMipenmase 1) from Pseudomonas aeruginosa was the first B3 MBL to be identified on a readily mobile genetic element. Here we present the crystal structure of AIM-1 and use in silico docking and quantum mechanics and molecular mechanics (QM/MM) calculations, together with site-directed mutagenesis, to investigate its interaction with β-lactams. AIM-1 adopts the characteristic αβ/βα sandwich fold of MBLs but differs from other B3 enzymes in the conformation of an active site loop (residues 156 to 162) which is involved both in disulfide bond formation and, we suggest, interaction with substrates. The structure, together with docking and QM/MM calculations, indicates that the AIM-1 substrate binding site is narrower and more restricted than those of other B3 MBLs, possibly explaining its higher catalytic efficiency. The location of Gln157 adjacent to the AIM-1 zinc center suggests a role in drug binding that is supported by our in silico studies. However, replacement of this residue by either Asn or Ala resulted in only modest reductions in AIM-1 activity against the majority of β-lactam substrates, indicating that this function is nonessential. Our study reveals AIM-1 to be a subclass B3 MBL with novel structural and mechanistic features.

On the active site of mononuclear B1 metallo β-lactamases: a computational study

Metallo-β-lactamases (MβLs) are Zn(II)-based bacterial enzymes that hydrolyze β-lactam antibiotics, hampering their beneficial effects. In the most relevant subclass (B1), X-ray crystallography studies on the enzyme from Bacillus Cereus point to either two zinc ions in two metal sites (the so-called '3H' and 'DCH' sites) or a single Zn(II) ion in the 3H site, where the ion is coordinated by Asp120, Cys221 and His263 residues. However, spectroscopic studies on the B1 enzyme from B. Cereus in the mono-zinc form suggested the presence of the Zn(II) ion also in the DCH site, where it is bound to an aspartate, a cysteine, a histidine and a water molecule. A structural model of this enzyme in its DCH mononuclear form, so far lacking, is therefore required for inhibitor design and mechanistic studies. By using force field based and mixed quantum-classical (QM/MM) molecular dynamics (MD) simulations of the protein in aqueous solution we constructed such structural model. The geometry and the H-bond network at the catalytic site of this model, in the free form and in complex with two common β-lactam drugs, is compared with experimental and theoretical findings of CphA and the recently solved crystal structure of new B2 MβL from Serratia fonticola (Sfh-I). These are MβLs from the B2 subclass, which features an experimentally well established mono-zinc form, in which the Zn(II) is located in the DCH site. From our simulations the εεδ and δεδ protomers emerge as possible DCH mono-zinc reactive species, giving a novel contribution to the discussion on the MβL reactivity and to the drug design process.

Biapenem inactivation by B2 metallo β-lactamases: energy landscape of the post-hydrolysis reactions

BACKGROUND

The first line of defense by bacteria against β-lactam antibiotics is the expression of β-lactamases, which cleave the amide bond of the β-lactam ring. In the reaction of biapenem inactivation by B2 metallo β-lactamases (MβLs), after the β-lactam ring is opened, the carboxyl group generated by the hydrolytic process and the hydroxyethyl group (common to all carbapenems) rotate around the C5-C6 bond, assuming a new position that allows a proton transfer from the hydroxyethyl group to C2, and a nucleophilic attack on C3 by the oxygen atom of the same side-chain. This process leads to the formation of a bicyclic compound, as originally observed in the X-ray structure of the metallo β-lactamase CphA in complex with product.

METHODOLOGY/PRINCIPAL FINDINGS

QM/MM and metadynamics simulations of the post-hydrolysis steps in solution and in the enzyme reveal that while the rotation of the hydroxyethyl group can occur in solution or in the enzyme active site, formation of the bicyclic compound occurs primarily in solution, after which the final product binds back to the enzyme. The calculations also suggest that the rotation and cyclization steps can occur at a rate comparable to that observed experimentally for the enzymatic inactivation of biapenem only if the hydrolysis reaction leaves the N4 nitrogen of the β-lactam ring unprotonated.

CONCLUSIONS/SIGNIFICANCE

The calculations support the existence of a common mechanism (in which ionized N4 is the leaving group) for carbapenems hydrolysis in all MβLs, and suggest a possible revision of mechanisms for B2 MβLs in which the cleavage of the β-lactam ring is associated with or immediately followed by protonation of N4. The study also indicates that the bicyclic derivative of biapenem has significant affinity for B2 MβLs, and that it may be possible to obtain clinically effective inhibitors of these enzymes by modification of this lead compound.

Crystal structure of Serratia fonticola Sfh-I: activation of the nucleophile in mono-zinc metallo-β-lactamases

Metallo-β-lactamases (MBLs) or class B β-lactamases are zinc-dependent enzymes capable of inactivating almost all classes of β-lactam antibiotics. To date, no MBL inhibitors are available for clinical use. Of the three MBL subclasses, B2 enzymes, unlike those from subclasses B1 and B3, are fully active with one zinc ion bound and possess a narrow spectrum of activity, hydrolyzing carbapenem substrates almost exclusively. These remain the least studied MBLs. Sfh-I, originally identified from the aquatic bacterium Serratia fonticola UTAD54, is a divergent member of this group. Previous B2 MBL structures, available only for the CphA enzyme from Aeromonas hydrophila, all contain small molecules bound in their active sites. In consequence, the mechanism by which these enzymes activate the water nucleophile required for β-lactam hydrolysis remains to be unambiguously established. Here we report crystal structures of Sfh-I as a complex with glycerol and in the unliganded form, revealing for the first time the disposition of water molecules in the B2 MBL active site. Our data indicate that the hydrolytic water molecule is activated by His118 rather than by Asp120 and/or zinc. Consistent with this proposal, we show that the environment of His118 in B2 MBLs is distinct from that of the B1 and B3 enzymes, where this residue acts as a zinc ligand, and offer a structure-based mechanism for β-lactam hydrolysis by these enzymes.

Structural and computational investigations of VIM-7: insights into the substrate specificity of vim metallo-β-lactamases

The presence of metallo-β-lactamases (MBLs) in many clinically important human bacterial pathogens limits treatment options, as these enzymes efficiently hydrolyze nearly all β-lactam antibiotics. VIM enzymes are among the most widely distributed MBLs, but many of the individual VIM subtypes remain poorly characterized. Pseudomonas aeruginosa VIM-7 is the most divergent among VIM-type MBLs in terms of amino acid sequence. Here we present crystal structures of VIM-7 as the native enzyme, with Cys221 oxidized (VIM-7-Ox), and with a sulfur atom bridging the two active-site zinc ions (VIM-7-S). Comparison with VIM-2 and VIM-4 structures suggests an explanation for the reduced catalytic efficiency of VIM-7 against cephalosporins with a positively charged cyclic substituent at the C3 position (e.g., ceftazidime). Kinetic variations are attributed to substitutions in residues 60-66 (that form a loop adjacent to the active site previously implicated in substrate binding) and to the disruption of two hydrogen-bonding clusters through substitutions at positions 218 and 224. Furthermore, the less negatively charged surface of VIM-7 (compared to VIM-2) may also contribute to the reduced hydrolytic efficiency. Docking of the cephalosporins ceftazidime and cefotaxime into the VIM-2 and VIM-7 structures reveals that amino acid substitutions may cause the mode of substrate binding to differ between the two enzymes. Our structures thus provide new insights into the variation in substrate specificity that is evident across this family of clinically important enzymes.

Sensitive and specific phenotypic assay for metallo-beta-lactamase detection in Enterobacteria by use of a moxalactam disk supplemented with EDTA

Moxalactam is highly hydrolyzed by plasmid-mediated metallo-β-lactamases (MBLs), whereas it is poorly inactivated by serine-active carbapenemases. This study demonstrated that moxalactam resistance constituted an effective screen for MBL expression in enterobacteria, which could be confirmed, even in low-MBL-producing isolates, by a disk potentiation test using moxalactam and EDTA.

Crystal structure of NDM-1 reveals a common β-lactam hydrolysis mechanism

Metallo-β-lactamases (MBLs) hydrolyze most β-lactam antibiotics, and bacteria containing this kind of enzyme pose a serious threat to the public health. The newly identified New Delhi MBL (NDM-1) is a new member of this family that shows tight binding to penicillin and cephalosporins. The rapid dissemination of NDM-1 in clinically relevant bacteria has become a global concern. However, no clinically useful inhibitors against MBLs exist, partly due to the lack of knowledge about the catalysis mechanism of this kind of enzyme. Here we report the crystal structure of this novel enzyme in complex with a hydrolyzed ampicillin at its active site at 1.3-Å resolution. Structural comparison with other MBLs revealed a new hydrolysis mechanism applicable to all three subclasses of MBLs, which might help the design of mechanism based inhibitors.

QM/MM studies of monozinc β-lactamase CphA suggest that the crystal structure of an enzyme-intermediate complex represents a minor pathway

QM/MM studies of the hydrolysis of a β-lactam antibiotic molecule (biapenem) catalyzed by a monozinc β-lactamase (CphA) have revealed the complete reaction mechanism and shown that an experimentally determined enzyme-intermediate complex is a stable intermediate or product in a minor pathway.

High-resolution crystal structure of the subclass B3 metallo-beta-lactamase BJP-1: rational basis for substrate specificity and interaction with sulfonamides

Metallo-β-lactamases (MBLs) are important enzymatic factors in resistance to β-lactam antibiotics that show important structural and functional heterogeneity. BJP-1 is a subclass B3 MBL determinant produced by Bradyrhizobium japonicum that exhibits interesting properties. BJP-1, like CAU-1 of Caulobacter vibrioides, overall poorly recognizes β-lactam substrates and shows an unusual substrate profile compared to other MBLs. In order to understand the structural basis of these properties, the crystal structure of BJP-1 was obtained at 1.4-Å resolution. This revealed significant differences in the conformation and locations of the active-site loops, determining a rather narrow active site and the presence of a unique N-terminal helix bearing Phe-31, whose side chain binds in the active site and represents an obstacle for β-lactam substrate binding. In order to probe the potential of sulfonamides (known to inhibit various zinc-dependent enzymes) to bind in the active sites of MBLs, the structure of BJP-1 in complex with 4-nitrobenzenesulfonamide was also obtained (at 1.33-A resolution), thereby revealing the mode of interaction of these molecules in MBLs. Interestingly, sulfonamide binding resulted in the displacement of the side chain of Phe-31 from its hydrophobic binding pocket, where the benzene ring of the molecule is now found. These data further highlight the structural diversity shown by MBLs but also provide interesting insights in the structure-function relationships of these enzymes. More importantly, we provided the first structural observation of MBL interaction with sulfonamides, which might represent an interesting scaffold for the design of MBL inhibitors.

Motion of the zinc ions in catalysis by a dizinc metallo-beta-lactamase

We report rapid-freeze-quench X-ray absorption spectroscopy of a dizinc metallo-beta-lactamase (MbetaL) reaction intermediate. The Zn(II) ions in the dinuclear active site of the S. maltophilia Class B3 MbetaL move away from each other, by approximately 0.3 A after 10 ms of reaction with nitrocefin, from 3.4 to 3.7 A. Together with our previous characterization of the resting enzyme and its nitrocefin product complex, where the Zn(II) ion separation relaxes to 3.6 A, these data indicate a scissoring motion of the active site that accompanies the ring-opening step. The average Zn(II) coordination number of 4.5 in the resting enzyme appears to be maintained throughout the reaction with nitrocefin. This is the first direct structural information available on early stage dizinc metallo-beta-lactamase catalysis.

Catalytic role of the metal ion in the metallo-beta-lactamase GOB

Metallo-beta-lactamases (MbetaLs) stand as one of the main mechanisms of bacterial resistance toward carbapenems. The rational design of an inhibitor for MbetaLs has been limited by an incomplete knowledge of their catalytic mechanism and by the structural diversity of their active sites. Here we show that the MbetaL GOB from Elizabethkingia meningoseptica is active as a monometallic enzyme by using different divalent transition metal ions as surrogates of the native Zn(II) ion. Of the metal derivatives in which Zn(II) is replaced, Co(II) and Cd(II) give rise to the most active enzymes and are shown to occupy the same binding site as the native ion. However, Zn(II) is the only metal ion capable of stabilizing an anionic intermediate that accumulates during nitrocefin hydrolysis, in which the C-N bond has already been cleaved. This finding demonstrates that the catalytic role of the metal ion in GOB is to stabilize the formation of this intermediate prior to nitrogen protonation. This role may be general to all MbetaLs, whereas nucleophile activation by a Zn(II) ion is not a conserved mechanistic feature.

Adaptive protein evolution grants organismal fitness by improving catalysis and flexibility

Protein evolution is crucial for organismal adaptation and fitness. This process takes place by shaping a given 3-dimensional fold for its particular biochemical function within the metabolic requirements and constraints of the environment. The complex interplay between sequence, structure, functionality, and stability that gives rise to a particular phenotype has limited the identification of traits acquired through evolution. This is further complicated by the fact that mutations are pleiotropic, and interactions between mutations are not always understood. Antibiotic resistance mediated by beta-lactamases represents an evolutionary paradigm in which organismal fitness depends on the catalytic efficiency of a single enzyme. Based on this, we have dissected the structural and mechanistic features acquired by an optimized metallo-beta-lactamase (MbetaL) obtained by directed evolution. We show that antibiotic resistance mediated by this enzyme is driven by 2 mutations with sign epistasis. One mutation stabilizes a catalytically relevant intermediate by fine tuning the position of 1 metal ion; whereas the other acts by augmenting the protein flexibility. We found that enzyme evolution (and the associated antibiotic resistance) occurred at the expense of the protein stability, revealing that MbetaLs have not exhausted their stability threshold. Our results demonstrate that flexibility is an essential trait that can be acquired during evolution on stable protein scaffolds. Directed evolution aided by a thorough characterization of the selected proteins can be successfully used to predict future evolutionary events and design inhibitors with an evolutionary perspective.

Role of the Zn1 and Zn2 sites in metallo-beta-lactamase L1

In an effort to probe the role of the Zn(II) sites in metallo-beta-lactamase L1, mononuclear metal ion containing and heterobimetallic analogues of the enzyme were generated and characterized using kinetic and spectroscopic studies. Mononuclear Zn(II)-containing L1, which binds Zn(II) in the consensus Zn1 site, was shown to be slightly active; however, this enzyme did not stabilize a nitrocefin-derived reaction intermediate that had been previously detected. Mononuclear Co(II)- and Fe(III)-containing L1 were essentially inactive, and NMR and EPR studies suggest that these metal ions bind to the consensus Zn2 site in L1. Heterobimetallic analogues (ZnCo and ZnFe) analogues of L1 were generated, and stopped-flow kinetic studies revealed that these enzymes rapidly hydrolyze nitrocefin and that there are large amounts of the reaction intermediate formed during the reaction. The heterobimetallic analogues were reacted with nitrocefin, and the reactions were rapidly freeze quenched. EPR studies on these samples demonstrate that Co(II) is 5-coordinate in the resting state, proceeds through a 4-coordinate species during the reaction, and is 5-coordinate in the enzyme-product complex. These studies demonstrate that the metal ion in the Zn1 site is essential for catalysis in L1 and that the metal ion in the Zn2 site is crucial for stabilization of the nitrocefin-derived reaction intermediate.

Mechanism of the quorum-quenching lactonase (AiiA) from Bacillus thuringiensis. 2. Substrate modeling and active site mutations

The N-acyl-l-homoserine lactone hydrolases (AHL lactonases) have attracted considerable attention because of their ability to quench AHL-mediated quorum-sensing pathways in Gram-negative bacteria and because of their relation to other enzymes in the metallo-β-lactamase superfamily. To elucidate the detailed catalytic mechanism of AHL lactonase, mutations are made on residues that presumably contribute to substrate binding and catalysis. Steady-state kinetic studies are carried out on both the wild-type and mutant enzymes using a spectrum of substrates. Two mutations, Y194F and D108N, present significant effects on the overall catalysis. On the basis of a high-resolution structural model of the enzyme−product complex, a hybrid quantum mechanical/molecular mechanical method is used to model the substrate binding orientation and to probe the effect of the Y194F mutation. Combining all experimental and computational results, we propose a detailed mechanism for the ring-opening hydrolysis of AHL substrates as catalyzed by the AHL lactonase from Bacillus thuringiensis. Several features of the mechanism that are also found in related enzymes are discussed and may help to define an evolutionary thread that connects the hydrolytic enzymes of this mechanistically diverse superfamily.

Engineered mononuclear variants in Bacillus cereus metallo-beta-lactamase BcII are inactive

Metallo-beta-lactamases (MbetaLs) are zinc enzymes able to hydrolyze almost all beta-lactam antibiotics, rendering them inactive, at the same time endowing bacteria high levels of resistance. The design of inhibitors active against all classes of MbetaLs has been hampered by their structural diversity and by the heterogeneity in metal content in enzymes from different sources. BcII is the metallo-beta-lactamase from Bacillus cereus, which is found in both the mononuclear and dinuclear forms. Despite extensive studies, there is still controversy about the nature of the active BcII species. Here we have designed two mutant enzymes in which each one of the metal binding sites was selectively removed. Both mutants were almost inactive, despite preserving most of the structural features of each metal site. These results reveal that neither site isolated in the MbetaL scaffold is sufficient to render a fully active enzyme. This suggests that only the dinuclear species is active or that the mononuclear variants can be active only if aided by other residues that would be metal ligands in the dinuclear species.

Mechanism of the quorum-quenching lactonase (AiiA) from Bacillus thuringiensis. 1. Product-bound structures

Enzymes capable of hydrolyzing N-acyl- l-homoserine lactones (AHLs) used in some bacterial quorum-sensing pathways are of considerable interest for their ability to block undesirable phenotypes. Most known AHL hydrolases that catalyze ring opening (AHL lactonases) are members of the metallo-beta-lactamase enzyme superfamily and rely on a dinuclear zinc site for catalysis and stability. Here we report the three-dimensional structures of three product complexes formed with the AHL lactonase from Bacillus thuringiensis. Structures of the lactonase bound with two different concentrations of the ring-opened product of N-hexanoyl- l-homoserine lactone are determined at 0.95 and 1.4 A resolution and exhibit different product configurations. A structure of the ring-opened product of the non-natural N-hexanoyl- l-homocysteine thiolactone at 1.3 A resolution is also determined. On the basis of these product-bound structures, a substrate-binding model is presented that differs from previous proposals. Additionally, the proximity of the product to active-site residues and observed changes in protein conformation and metal coordination provide insight into the catalytic mechanism of this quorum-quenching metalloenzyme.

The Zn2 Position in Metallo-β-Lactamases is Critical for Activity: A Study on Chimeric Metal Sites on a Conserved Protein Scaffold

Metallo-beta-lactamases (MbetaLs) are bacterial Zn(II)-dependent hydrolases that confer broad-spectrum resistance to beta-lactam antibiotics. These enzymes can be subdivided into three subclasses (B1, B2 and B3) that differ in their metal binding sites and their characteristic tertiary structure. To date there are no clinically useful pan-MbetaL inhibitors available, mainly due to the unawareness of key catalytic features common to all MbetaL brands. Here we have designed, expressed and characterized two double mutants of BcII, a di-Zn(II) B1-MbetaL from Bacillus cereus, namely BcII-R121H/C221D (BcII-HD) and BcII-R121H/C221S (BcII-HS). These mutants display modified environments at the so-called Zn2 site or DCH site, reproducing the metal coordination environments of structurally related metallohydrolases. Through a combination of structural and functional studies, we found that BcII-HD is an impaired beta-lactamase even as a di-Zn(II) enzyme, whereas BcII-HS exhibits the ability to exist as mono or di-Zn(II) species in solution, with different catalytic performances. We show that these effects result from an altered position of Zn2, which is incapable of providing a productive interaction with the substrate beta-lactam ring. These results indicate that the position of Zn2 is essential for a productive substrate binding and hydrolysis.

Structural basis for the role of Asp-120 in metallo-beta-lactamases

Metallo-beta-lactamases (mbetals) are zinc-dependent enzymes that hydrolyze a wide range of beta-lactam antibiotics. The mbetal active site features an invariant Asp-120 that ligates one of the two metal ions (Zn2) and a metal-bridging water/hydroxide (Wat1). Previous studies show that substitutions at Asp-120 dramatically affect mbetal activity, but no consensus exists as to its role in beta-lactam turnover. Here we present crystal structures of the Asn and Cys mutants of Asp-120 of the L1 mbetal from Stenotrophomonas maltophilia. Both mutants retain a dinuclear zinc center with Wat1 present. In the essentially inactive Cys enzyme Zn2 is displaced to a more buried position relative to that in the wild-type enzyme. In the catalytically impaired Asn enzyme the coordination of Zn2 is altered, neither it nor Wat1 is coordinated by Asn-120, and the N-terminal 19 amino acids, important to cooperative interactions between subunits in the wild-type enzyme, are disordered. Comparison with the structure of L1 complexed with the hydrolyzed oxacephem moxalactam suggests that in the Cys mutant Zn2 can no longer make stabilizing interactions with anionic nitrogen species formed in the hydrolytic reaction. The diminished activity of the Asn mutant arises from a combination of loss of intersubunit interactions and impaired proton transfer to, and reduced interaction of Zn2 with, the substrate amide nitrogen. We conclude that, while interactions of Asp-120 with active site water molecules are important to proton transfer and possibly nucleophilic attack by Wat1, its primary role is to optimally position Zn2 for catalytically important interactions with the charged amide nitrogen of substrate.

Antibiotic Deactivation by a Dizinc β-Lactamase: Mechanistic Insights from QM/MM and DFT Studies

Hybrid quantum mechanical/molecular mechanical (QM/MM) methods and density functional theory (DFT) were used to investigate the initial ring-opening step in the hydrolysis of moxalactam catalyzed by the dizinc L1 beta-lactamase from Stenotrophomonas maltophilia. Anchored at the enzyme active site via direct metal binding as suggested by a recent X-ray structure of an enzyme-product complex (Spencer, J.; et al. J. Am. Chem. Soc. 2005, 127, 14439), the substrate is well aligned with the nucleophilic hydroxide that bridges the two zinc ions. Both QM/MM and DFT results indicate that the addition of the hydroxide nucleophile to the carbonyl carbon in the substrate lactam ring leads to a metastable intermediate via a dominant nucleophilic addition barrier. The potential of mean force obtained by SCC-DFTB/MM simulations and corrected by DFT/MM calculations yields a reaction free energy barrier of 23.5 kcal/mol, in reasonable agreement with the experimental value of 18.5 kcal/mol derived from kcat of 0.15 s(-1). It is further shown that zinc-bound Asp120 plays an important role in aligning the nucleophile, but accepts the hydroxide proton only after the nucleophilic addition. The two zinc ions are found to participate intimately in the catalysis, consistent with the proposed mechanism. In particular, the Zn(1) ion is likely to serve as an "oxyanion hole" in stabilizing the carbonyl oxygen, while the Zn(2) ion acts as an electrophilic catalyst to stabilize the anionic nitrogen leaving group.

Inhibitor Binding by Metallo-β-lactamase IMP-1 from Pseudomonas aeruginosa: Quantum Mechanical/Molecular Mechanical Simulations

The dynamics of the IMP-1 enzyme complexed with three prototypical inhibitors are investigated using a quantum mechanical/molecular mechanical (QM/MM) method based on the self-consistent-charge density-functional tight-binding model. The binding patterns of the inhibitors observed in X-ray diffraction experiments are well reproduced in 600 ps molecular dynamics simulations at room temperature. These inhibitors anchor themselves in the enzyme active site by direct coordination with the two zinc ions, displacing the hydroxide nucleophile that bridges the two zinc ions. In addition, they also interact with several active-site residues and those in two mobile loops. The excellent agreement with experimental structural data validates the QM/MM treatment used in our simulations.

A minimalistic approach to identify substrate binding features in B1 Metallo-beta-lactamases

The 2-oxoazetidinylacetate sodium salt was synthesized as a model of a minimal beta-lactam drug. This compound and the monobactam aztreonam were assayed as substrates of the Metallo-beta-lactamase BcII. None of them was hydrolyzed by the enzyme. While the azetidinone was not able to bind BcII, aztreonam was shown to bind in a nonproductive mode. These results provide an explanation for the unability of Metallo-beta-lactamases to inactive monobactams and give some clues for inhibitor design.

Asp-120 locates Zn2 for optimal metallo-beta-lactamase activity

Metallo-beta-lactamases are zinc-dependent hydrolases that inactivate beta-lactam antibiotics, rendering bacteria resistant to them. Asp-120 is fully conserved in all metallo-beta-lactamases and is central to catalysis. Several roles have been proposed for Asp-120, but so far there is no agreed consensus. We generated four site-specifically substituted variants of the enzyme BcII from Bacillus cereus as follows: D120N, D120E, D120Q, and D120S. Replacement of Asp-120 by other residues with very different metal ligating capabilities severely impairs the lactamase activity without abolishing metal binding to the mutated site. A kinetic study of these mutants indicates that Asp-120 is not the proton donor, nor does it play an essential role in nucleophilic activation. Spectroscopic and crystallographic analysis of D120S BcII, the least active mutant bearing the weakest metal ligand in the series, reveals that this enzyme is able to accommodate a dinuclear center and that perturbations in the active site are limited to the Zn2 site. It is proposed that the role of Asp-120 is to act as a strong Zn2 ligand, locating this ion optimally for substrate binding, stabilization of the development of a partial negative charge in the beta-lactam nitrogen, and protonation of this atom by a zinc-bound water molecule.

The metallo-beta-lactamase GOB is a mono-Zn(II) enzyme with a novel active site

Metallo-beta-lactamases (MbetaLs) are zinc-dependent enzymes able to hydrolyze and inactivate most beta-lactam antibiotics. The large diversity of active site structures and metal content among MbetaLs from different sources has limited the design of a pan-MbetaL inhibitor. Here we report the biochemical and biophysical characterization of a novel MbetaL, GOB-18, from a clinical isolate of a Gram-negative opportunistic pathogen, Elizabethkingia meningoseptica. Different spectroscopic techniques, three-dimensional modeling, and mutagenesis experiments, reveal that the Zn(II) ion is bound to Asp120, His121, His263, and a solvent molecule, i.e. in the canonical Zn2 site of dinuclear MbetaLs. Contrasting all other related MbetaLs, GOB-18 is fully active against a broad range of beta-lactam substrates using a single Zn(II) ion in this site. These data further enlarge the structural diversity of MbetaLs.

Antibiotic Binding to Dizinc β-Lactamase L1 from Stenotrophomonas maltophilia: SCC-DFTB/CHARMM and DFT Studies

A dizinc beta-lactamase (L1 from Stenotrophomonas maltophilia) complexed with an antibiotic compound (moxalactam) has been studied using a hybrid quantum mechanical/molecular mechanical (QM/MM) approach. The QM region is described by the self-consistent charge-density functional tight binding (SCC-DFTB) model while the MM by CHARMM. The Michaelis complex, which is constructed from a recent X-ray structure of the L1 enzyme with the hydrolyzed moxalactam, is simulated by molecular dynamics. The simulation yields valuable insights into substrate-enzyme interaction, whose implications in the enzyme catalysis are discussed. Finally, the QM/MM results are compared with a high-level density functional theory study of a truncated active-site model and the agreement provides strong support for the SCC-DFTB treatment of the QM region.

Role of zinc content on the catalytic efficiency of B1 metallo beta-lactamases

Metallo beta-lactamases (MbetaL) are enzymes naturally evolved by bacterial strains under the evolutionary pressure of beta-lactam antibiotic clinical use. They have a broad substrate spectrum and are resistant to all the clinically useful inhibitors, representing a potential risk of infection if massively disseminated. The MbetaL scaffold is designed to accommodate one or two zinc ions able to activate a nucleophilic hydroxide for the hydrolysis of the beta-lactam ring. The role of zinc content on the binding and reactive mechanism of action has been the subject of debate and still remains an open issue despite the large amount of data acquired. We report herein a study of the reaction pathway for binuclear CcrA from Bacteroides fragilis using density functional theory based quantum mechanics-molecular mechanics dynamical modeling. CcrA is the prototypical binuclear enzyme belonging to the B1 MbetaL family, which includes several harmful chromosomally encoded and transferable enzymes. The involvement of a second zinc ion in the catalytic mechanism lowers the energetic barrier for beta-lactam hydrolysis, preserving the essential binding features found in mononuclear B1 enzymes (BcII from Bacillus cereus) while providing a more efficient single-step mechanism. Overall, this study suggests that uptake of a second equivalent zinc ion is evolutionary favored.

Hydroxyl Groups in the ββ Sandwich of Metallo-β-lactamases Favor Enzyme Activity: Tyr218 and Ser262 Pull Down the Lid

Metallo-beta-lactamases (MBLs) efficiently hydrolyze and thereby inactivate various beta-lactam antibiotics in clinical use. Their potential to evolve into more efficient enzymes threatens public health. Recently, we have identified the designed F218Y mutant of IMP-1 as an enzyme with superior catalytic efficiency compared to the wild-type. Thus, it may be found in clinical isolates in the future. In an effort to elucidate the molecular mechanisms involved in enhanced activity, we carried out molecular dynamics simulations of ten MBL variants in complex with a cefotaxime intermediate. The stability of these near-transition state enzyme-substrate intermediate complexes was modeled and compared to the experimental catalytic efficiencies k(cat)/K(M). For each of the ten complexes ten independent simulations were performed. In each simulation the temperature was gradually increased and determined upon breakdown of the complex. Rankings based on the experimental catalytic efficiencies and the data from computer simulations were in good agreement. From trajectory analysis of stable simulations, the combination of Tyr218 and Ser262 was found to lead to an altered hydrogen bonding network, which translates into a closing down movement of a beta-hairpin loop covering the active site. These observations may explain the significantly decreased K(M) and increased k(cat)/K(M) values of this variant toward all substrates recently tested in experiment. Previously, we have discovered that mutations G262S (yielding IMP-1) and G262A in IMP-6 stabilize the Zn(II) ligand His263 and thus the enzyme-substrate intermediate complex through a domino effect, which enhances conversion of drugs like ceftazidime, penicillins, and imipenem. Together, the domino effect and the altered beta-hairpin loop conformation explain how IMP-6 can evolve through mutations G262S and F218Y into an enzyme with up to one order of magnitude increased catalytic efficiencies toward these important antibiotics. Furthermore, the previously proposed binding of a third zinc ion close to the active site of IMP-6 mutant S121G was corroborated by our simulations.

X-ray absorption spectroscopy of the zinc-binding sites in the class B2 metallo-beta-lactamase ImiS from Aeromonas veronii bv. sobria

X-ray absorption spectroscopy was used to investigate the metal-binding sites of ImiS from Aeromonas veronii bv. sobria in catalytically active (1-Zn), product-inhibited (1-Zn plus imipenem), and inactive (2-Zn) forms. The first equivalent of zinc(II) was found to bind to the consensus Zn(2) site. The reaction of 1-Zn ImiS with imipenem leads to a product-bound species, coordinated to Zn via a carboxylate group. The inhibitory binding site of ImiS was examined by a comparison of wild-type ImiS with 1 and 2 equiv of bound zinc. 2-Zn ImiS extended X-ray absorption fine structure data support a binding site that is distant from the active site and contains both one sulfur donor and one histidine ligand. On the basis of the amino acid sequence of ImiS and the crystal structure of CphA [Garau et al. (2005) J. Mol. Biol. 345, 785-795], we propose that the inhibitory binding site is formed by M146, found on the B2-distinct alpha3 helix, and H118, a canonical Zn(1) ligand, proposed to help activate the nucleophilic water. The mutation of M146 to isoleucine abolishes metal inhibition. This is the first characterization of ImiS with the native metal Zn and establishes, for the first time, the location of the inhibitory metal site.

The variation of catalytic efficiency of Bacillus cereus metallo-beta-lactamase with different active site metal ions

The kinetics and mechanism of hydrolysis of the native zinc and metal substituted Bacillus cereus (BcII) metallo-beta-lactamase have been investigated. The pH and metal ion dependence of k(cat) and k(cat)/K(m), determined under steady-state conditions, for the cobalt substituted BcII catalyzed hydrolysis of cefoxitin, cephaloridine, and cephalexin indicate that an enzyme residue of apparent pK(a) 6.3 +/- 0.1 is required in its deprotonated form for metal ion binding and catalysis. The k(cat)/K(m) for cefoxitin and cephalexin with cadmium substituted BcII is dependent on two ionizing groups on the enzyme: one of pK(a1) = 8.7 +/- 0.1 required in its deprotonated form and the other of pK(a2) = 9.3 +/- 0.1 required in its protonated form for activity. The pH dependence of the competitive inhibition constant, K(i), for CdBcII with l-captopril indicates that pK(a1) = 8.7 +/- 0.1 corresponds to the cadmium-bound water. For the manganese substituted BcII, the pH dependence of k(cat)/K(m) for benzylpenicillin, cephalexin, and cefoxitin similarly indicated the importance of two catalytic groups: one of pK(a1) = 8.5 +/- 0.1 which needs to be deprotonated and the other of pK(a2) = 9.4 +/- 0.1 which needs to be protonated for catalysis; the pK(a1) was assigned to the manganese-bound water. The rate was metal ion concentration dependent at the highest manganese concentrations used (10(-)(3) M). The metal substituted species have similar or higher catalytic activities compared with the zinc enzyme, albeit at pHs above 7. Interestingly, with cefoxitin, a very poor substrate for ZnBcII, both k(cat) and k(cat)/K(m) increase with increasing pK(a) of the metal-bound water, in the order Zn < Co < Mn < Cd. A higher pK(a) for the metal-bound water for cadmium and manganese BCII leads to more reactive enzymes than the native zinc BcII, suggesting that the role of the metal ion is predominantly to provide the nucleophilic hydroxide, rather than to act as a Lewis acid to polarize the carbonyl group and stabilize the oxyanion tetrahedral intermediate.

Mechanistic studies on the mononuclear ZnII-containing metallo-beta-lactamase ImiS from Aeromonas sobria

In an effort to understand the reaction mechanism of a B2 metallo-beta-lactamase, steady-state and pre-steady-state kinetic and rapid freeze quench electron paramagnetic resonance (EPR) studies were conducted on ImiS and its reaction with imipenem and meropenem. pH dependence studies revealed no inflection points in the pH range of 5.0-8.5, while proton inventories demonstrated at least 1 rate-limiting proton transfer. Site-directed mutagenesis studies revealed that Lys224 plays a catalytic role in ImiS, while the side chain of Asn233 does not play a role in binding or catalysis. Stopped-flow fluorescence studies on ImiS, which monitor changes in tryptophan fluorescence on the enzyme, and its reaction with imipenem and meropenem revealed biphasic fluorescence time courses with a rate of fluorescence loss of 160 s(-)(1) and a slower rate of fluorescence regain of 98 s(-)(1). Stopped-flow UV-vis studies, which monitor the concentration of substrate, revealed a rapid loss in absorbance during catalysis with a rate of 97 s(-)(1). These results suggest that the rate-limiting step in the reaction catalyzed by ImiS is C-N bond cleavage. Rapid freeze quench EPR studies on Co(II)-substituted ImiS demonstrated the appearance of a rhombic signal after 10 ms that is assigned to a reaction intermediate that has a five-coordinate metal center. A distinct product (EP) complex was also observed and began to appear in 18-19 ms. When these results are taken together, they allow for a reaction mechanism to be offered for the B2 metallo-beta-lactamases and demonstrate that the mono- and dinuclear Zn(II)-containing enzymes share a common rate-limiting step, which is C-N bond cleavage.

Metallo-beta-lactamases: novel weaponry for antibiotic resistance in bacteria

Metallo-beta-lactamases are broad-spectrum zinc enzymes, able to inactivate most clinically useful beta-lactam antibiotics. Their structural and functional diversity has thus far limited the understanding of their catalytic mechanism, therefore thwarting the rational design of a common inhibitor. On the basis of the recent availability of structures of enzyme-product complexes and novel mechanistic studies, here, we attempt to find minimal common elements in different members of this family. In contrast with other metalloenzymes, most of the substrate binding and catalytic power resides in the adequate positioning of one or two Zn(II) ions in the active site, empowered by an unusual flexibility.