Temperature Effects on the Solvent-Dependent Deactivation of Singlet Oxygen

Fluorine end-capped optical fibers for photosensitizer release and singlet oxygen production

The usefulness of a fiber optic technique for generating singlet oxygen and releasing the pheophorbide photosensitizer has been increased by the fluorination of the porous Vycor glass tip. Singlet oxygen emerges through the fiber tip with 669-nm light and oxygen, releasing the sensitizer molecules upon a [2 + 2] addition of singlet oxygen with the ethene spacer and scission of a dioxetane intermediate. Switching from a nonfluorinated to a fluorinated glass tip led to a clear reduction of the adsorbtive affinity of the departing sensitizer with improved release into homogeneous toluene solution and bovine tissue, but no difference was found in water since the sensitizer was insoluble. High surface coverage of the nonafluorohexylsilane enhanced the cleavage efficiency by 15% at the ethene site. The fluorosilane groups also caused crowding and seemed to reduce access of (1)O(2) to the ethene site, which attenuated the total quenching rate constant k(T), although there was less wasted (1)O(2) (from surface physical quenching) at the fluorosilane-coated than the native SiOH silica. The observations support a quenching mechanism that the replacement of the SiOH groups for the fluorosilane C-H and C-F groups enhanced the (1)O(2) lifetime at the fiber tip interface due to less efficient electronic-to-vibronic energy transfer.

Enhanced Photodynamic Selectivity of Nano-Silica-Attached Porphyrins Against Breast Cancer Cells

The synthesis and characterization of bare silica (4 nm in diameter) nanoparticle-attached meso-tetra(N-methyl-4-pyridyl)porphine (SiO(2)-TMPyP, 6 nm in diameter) are described for pH-controllable photosensitization. Distinguished from organosilanes, SiO(2) nanoparticles were functionalized as a potential quencher of triplet TMPyP and/or singlet oxygen ((1)O(2)) at alkaline pH, thereby turning off sensitizer photoactivity. In weak acidic solutions, TMPyP was released from SiO(2) surface for efficient production of (1)O(2). By monitoring (1)O(2) luminescence at 1270 nm, quantum yields of (1)O(2) production were found to be pH-dependent, dropping from ~ 0.45 in a pH range of 3-6 to 0.08 at pH 8-9, which is consistent with pH-dependent adsorption behavior of TMPyP on SiO(2) surface. These features make bare SiO(2)-attached cationic porphyrin a promising candidate for use in PDT for cancer treatment in which efficient (1)O(2) production at acidic pH and sensitizer deactivation at physiological pH are desirable. The enhanced therapeutic selectivity was confirmed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) tests and trypan blue exclusion tests of cell viability in breast cancer cell lines. Bimolecular quenching rate constants of (1)O(2) by free TMPyP, SiO(2) and SiO(2)-TMPyP nanoparticles were also determined.

Generating singlet oxygen bubbles: a new mechanism for gas-liquid oxidations in water

Laser-coupled microphotoreactors were developed to bubble singlet oxygen [(1)O(2) ((1)Δ(g))] into an aqueous solution containing an oxidizable compound. The reactors consisted of custom-modified SMA fiberoptic receptacles loaded with 150 μm silicon phthalocyanine glass sensitizer particles, where the particles were isolated from direct contact with water by a membrane adhesively bonded to the bottom of each device. A tube fed O(2) gas to the reactor chambers. In the presence of O(2), singlet oxygen was generated by illuminating the sensitizer particles with 669 nm light from an optical fiber coupled to the top of the reactor. The generated (1)O(2) was transported through the membrane by the O(2) stream and formed bubbles in solution. In solution, singlet oxygen reacted with probe compounds (9,10-anthracene dipropionate dianion, trans-2-methyl-2-pentanoate anion, N-benzoyl-D,L-methionine, or N-acetyl-D,L-methionine) to give oxidized products in two stages. The early stage was rapid and showed that (1)O(2) transfer occurred via bubbles mainly in the bulk water solution. The later stage was slow; it arose only from (1)O(2)-probe molecule contact at the gas/liquid interface. A mechanism is proposed that involves (1)O(2) mass transfer and solvation, where smaller bubbles provide better penetration of (1)O(2) into the flowing stream due to higher surface-to-volume contact between the probe molecules and (1)O(2).

A hand-held fiber-optic implement for the site-specific delivery of photosensitizer and singlet oxygen

We have constructed a fiber optic device that internally flows triplet oxygen and externally produces singlet oxygen, causing a reaction at the (Z)-1,2-dialkoxyethene spacer group, freeing a pheophorbide sensitizer upon the fragmentation of a reactive dioxetane intermediate. The device can be operated and sensitizer photorelease observed using absorption and fluorescence spectroscopy. We demonstrate the preference of sensitizer photorelease when the probe tip is in contact with octanol or lipophilic media. A first-order photocleavage rate constant of 1.13 h(-1) was measured in octanol where dye desorption was not accompanied by readsorption. When the probe tip contacts aqueous solution, the photorelease was inefficient because most of the dye adsorbed on the probe tip, even after the covalent ethene spacer bonds have been broken. The observed stability of the free sensitizer in lipophilic media is reasonable even though it is a pyropheophorbide-a derivative that carries a p-formylbenzylic alcohol substituent at the carboxylic acid group. In octanol or lipid systems, we found that the dye was not susceptible to hydrolysis to pyropheophorbide-a, otherwise a pH effect was observed in a binary methanol-water system (9:1) at pH below 2 or above 8.

Imidazole-modified porphyrin as a pH-responsive sensitizer for cancer photodynamic therapy

5,10,15,20-Tetrakis(N-(2-(1H-imidazol-4-yl)ethyl)benzamide)porphyrin produced twice as many singlet oxygen ((1)O(2)) molecules at pH 5.0 (quantum yield 0.53 ± 0.01) than at pH 7.4, whereas the (1)O(2) quenching rate was reduced by a factor of 2.5 for a pH change from 7.4 to 5.0.

Efficient photosensitized oxygenations in phase contact enhanced microreactors

A transparent dual-channel microreactor with highly enhanced contact area-to-volume ratio was fabricated for efficient photosensitized oxygenations. The dual-channel microreactor shielded with polyvinylsilazane (PVSZ) consisting of an upper channel for liquid flow and a lower channel for O(2) flow, allows sufficient phase contact along the parallel channels through a gas permeable PDMS membrane for maintaining the O(2) saturated solution. Under full exposure of reactants to light, the reactions in high concentration are completed in minutes rather than hours that it takes to complete in a batch reactor. Moreover, the scale-up process using the microreactor revealed higher productivity than the batch reactor, which would be valuable for the practical applications in a broad range of gas-liquid chemical reactions.

Synthesis of fluorinated polythienothiophene-co-benzodithiophenes and effect of fluorination on the photovoltaic properties

Herein, we describe the synthesis of fluorinated polythienothiophene-co-benzodithiophenes (PTBFs) and the characterization of their physical properties, especially their performance in solar cells. Fluorination of the polymer backbone lowered both the HOMO and LUMO energy levels and simultaneously widened the energy bandgap of the polymer (0.1-0.2 eV). Incorporation of fluorine into the various positions of the polymer backbone significantly affected the solar cells' power conversion efficiency from 2.3% to 7.2%. Detailed studies revealed that the polymer containing mono-fluorinated thienothiophene gave the best solar cell performance. Perfluorination of the polymer backbone led to poor compatibility with PC(71)BM molecules, thus poor solar energy conversion efficiency. This is possibly due to the enhanced self-organization properties of the polymer chains and the fluorophobicity effect. Furthermore, it was found that perfluorination of the polymer backbone resulted in poor photochemical stability against singlet oxygen attack. Theoretical studies indicated that the internal polarization caused enhancement of the negative charge density on thienothiophene rings, which rendered them vulnerable to [2+4] cycloaddition reaction with singlet oxygen.