Urea Metal–Organic Frameworks as Effective and Size-Selective Hydrogen-Bond Catalysts

Pyridinium-Functionalized Ionic Metal-Organic Frameworks Designed as Bifunctional Catalysts for CO2 Fixation into Cyclic Carbonates

Ionic metal-organic frameworks (MOFs) offer a new platform to design and construct complete heterogeneous bifunctional catalytic systems for the chemical fixation of CO₂ with epoxides. Herein, we developed a series of bifunctional pyridinium ionic MOF heterogeneous catalysts (66Pym-RXs and 67BPym-MeI) by the postsynthetic N-alkylation of noncoordinated pyridine sites in porous MOFs. The synergetic catalytic effect of acidic sites with nucleophilic anions in the ionic MOF significantly enhanced the catalytic activity toward the cycloaddition of CO₂ with epoxides to produce cyclic carbonates under cocatalyst-free and solvent-free mild conditions. The catalytic activity of ionic MOFs is easily tuned by the introduction of different alkyl groups into pyridinium cations and halide ions. The 66Pym-iPrI catalyst displayed the highest catalytic performance in terms of the turnover number value for the synthesis of cyclic carbonates. The proposed alternative method provides the means of developing functional N-heterocyclic groups for the new design of bifunctional ionic MOFs as potential heterogeneous catalysts for CO₂ fixation applications.

Metal-organic framework assisted matrix solid-phase dispersion microextraction of saponins using response surface methodology

An efficient and simple metal-organic framework (MOF) assisted matrix solid-phase dispersion (MSPD) microextraction was developed for the extraction of the five saponins in P. ginseng leaves. The target analyses were detected by ultra high performance chromatography coupled with time-of-flight MS. Experimental conditions for MSPD microextraction were optimized by the Box-Behnken design of the response surface methodology. The optimal conditions were as follows: 20 mg adsorbent, 80% methanol-water solution for elution, 60 s grinding time, and the MOF-808 as the adsorbent. With the final optimized method, the calibration curves for five saponins showed good linearity (R² > 0.998) within range of 0.01-100 μg/mL. In addition, analytical recoveries ranged from 87.04 to 103.78%, with the RSD below 5%. The limit of detection and LOQ range from 0.087 to 0.114 μg/mL and 0.292 to 0.379 μg/mL, respectively. Compared with the traditional extraction method and published methods, the newly MOF-assisted MSPD extract exhibited higher extraction efficiency, simpler operation, and provided a cleaner extract with low consumption of organic reagents that was applied for rapid evaluation and quality control of active compounds from plants.

Chemical reactivity under nanoconfinement

Confining molecules can fundamentally change their chemical and physical properties. Confinement effects are considered instrumental at various stages of the origins of life, and life continues to rely on layers of compartmentalization to maintain an out-of-equilibrium state and efficiently synthesize complex biomolecules under mild conditions. As interest in synthetic confined systems grows, we are realizing that the principles governing reactivity under confinement are the same in abiological systems as they are in nature. In this Review, we categorize the ways in which nanoconfinement effects impact chemical reactivity in synthetic systems. Under nanoconfinement, chemical properties can be modulated to increase reaction rates, enhance selectivity and stabilize reactive species. Confinement effects also lead to changes in physical properties. The fluorescence of light emitters, the colours of dyes and electronic communication between electroactive species can all be tuned under confinement. Within each of these categories, we elucidate design principles and strategies that are widely applicable across a range of confined systems, specifically highlighting examples of different nanocompartments that influence reactivity in similar ways.

Effect of Fe(iii)-based MOFs on the catalytic efficiency of the tandem cyclooxidative reaction between 2-aminobenzamide and alcohols

Fe-MOFs were used as efficient heterogeneous catalysts in the tandem cyclooxidative reaction under microwave irradiation.

Directed Structural Transformations of Coordination Polymers Supported Single-Site Cu(II) Catalysts To Control the Site Selectivity of C-H Halogenation

A main difficulty in C-H bond functionalization is to undertake the catalyst control accurately where the reaction takes place. In this work, to achieve highly effective and regioselective single-site catalysts, a three-dimensional (3D) rhombus-like framework of {[Mn(Hidbt)DMF]·H₂O}_n (1) [H₃idbt = 5,5'-(1H-imidazole-4,5-diyl)-bis(2H-tetrazole)] containing coordinated DMF molecules was constructed. For the dissolution-recrystallization structural transformation process, attractive structural transformations proceeded from 1 to a new crystalline species formulated as {[Mn₃(idbt)₂(H₂O)₂]·3H₂O}_n (2) with a 3D windowlike architecture, and then the Mn ions in 2 could be exchanged with Cu ions through cation exchange in a single-crystal to single-crystal fashion to produce the Cu-exchanged product {[Mn₂Cu(idbt)₂(H₂O)₂]·3H₂O}_n (2a), which had a windowlike framework like that of 2. Furthermore, 2 and 2a were used as heterogeneous catalysts for the regioselective C-H halogenation of phenols with N-halosuccinimides (NCS and NBS) to produce the site selective single monohalogenated products. It was found that the catalytic activity and site selectivity of 2a were much higher than those of 2, because the unique structural features of 2a with the uniformly dispersed Cu^II active centers served as a single-site catalyst with a site-isolated and well-defined platform to promote the C-H halogenation reaction in regiocontrol and guide an orientation that favored the para selectivity during the reaction process.

Nonsymmetrical Bis-Azine Biaryls from Chloroazines: A Strategy Using Phosphorus Ligand-Coupling

Distinct approaches to synthesize bis-azine biaryls are in demand as these compounds have multiple applications in the chemical sciences and are challenging targets for metal-catalyzed cross-coupling reactions. Most approaches focus on developing new reagents as the formal nucleophilic coupling partner that can function in metal-catalyzed processes. We present an alternative approach using pyridine and diazine phosphines as nucleophilic partners and chloroazines where the heterobiaryl bond is formed via a tandem S_NAr-phosphorus ligand-coupling sequence. The heteroaryl phosphines are prepared from chloroazines and are bench-stable solids. A range of bis-azine biaryls can be formed from abundant chloroazines using this strategy that would be challenging using traditional approaches. A one-pot cross-electrophile coupling of two chloroazines is feasible, and we also compared the phosphorus-mediated strategy with metal-catalyzed coupling reactions to show advantages and compatibility.

Rational Construction of Breathing Metal-Organic Frameworks through Synergy of a Stretchy Ligand and Highly Variable π-π Interaction

The synergy of a stretchy ligand and highly variable π-π interaction has been proposed as a rational strategy for the construction of breathing metal-organic frameworks (MOFs). Based on this strategy, a breathing MOF, {[Cd₂(AzDC)₂(TPT)₂](DMF)₃} _n, was successfully constructed with stretchy 4,4'-diazene-1,2-diyldibenzoate acid (H₂AzDC) and 2,4,6-tris(4-pyridyl)triazine (TPT) as a source of the π-π interaction. The MOF features structure transformation upon stimulation with solvent guests and varied temperatures, which is straightforwardly characterized by single-crystal structures. Moreover, the solvent-free framework shows breathing behaviors in response to light hydrocarbon (C₂H₄, C₂H₆, C₃H₆, and C₃H₈) sorption, which was verified by stepwise sorption isotherms and in situ powder X-ray diffraction. Additional investigation of the sorption selectivity of C3/C2 systems indicated that the selectivity can be regulated by the modulation of the dynamic breathing behaviors, which can be used for the selective separation of C3/C2 light hydrocarbons.

A new iron-based metal-organic framework with enhancing catalysis activity for benzene hydroxylation

A new Fe-based metal-organic framework (MOF), termed Fe-TBAPy Fe2(OH)2(TBAPy)·4.4H2O, was solvothermally synthesized. Structural analysis revealed that Fe-TBAPy is built from [Fe(OH)(CO2)2]∞ rod-shaped SBUs (SBUs = secondary building units) and 1,3,6,8-tetrakis(p-benzoate)pyrene (TBAPy4-) linker to form the frz topological structure highlighted by 7 Å channels and 3.4 Å narrow pores sandwiching between the pyrene cores of TBAPy4-. Consequently, Fe-TBAPy was used as a recyclable heterogeneous catalyst for benzene hydroxylation. Remarkably, the catalysis reaction resulted in high phenol yield and selectivity of 64.5% and 92.9%, respectively, which are higher than that of the other Fe-based MOFs and comparable with those of the best-performing heterogeneous catalysts for benzene hydroxylation. This finding demonstrated the potential for the design of MOFs with enhancing catalysis activity for benzene hydroxylation.

Efficient Conversion of CO2 via Grafting Urea Group into a [Cu2(COO)4]-Based Metal-Organic Framework with Hierarchical Porosity

The assembly of mixed [1,1';3',1'']terphenyl-4,5',4''-tricarboxylic acid (H₃TPTC) and [1,1'-biphenyl]-4,4'-dicarboxylic acid (H₂BPDC), 2,2'-diamino-[1,1'-biphenyl]-4,4'-dicarboxylic acid (H₂BPDC-NH₂), or 6-oxo-6,7-dihydro-5H-dibenzo[ d, f][1,3]diazepine-3,9-dicarboxylic acid (H₂BPDC-Urea) with Cu²⁺ ion generated the corresponding copper-paddlewheel-based metal-organic framework (MOF) [Cu₅(TPTC)₃(BPDC)_0.5(H₂O)₅] (1), [Cu₅(TPTC)₃(BPDC-NH₂)_0.5(H₂O)₅] (1-NH₂), or [Cu₅(TPTC)₃(BPDC-Urea)_0.5(H₂O)₅] (1-Urea). They are isostructural with hierarchical porosity, consisting of zero-dimensional cage (19.2 Å × 18.9 Å) and one-dimensional pillar channel (29.7 Å × 15.1 Å) in a manner of face sharing. Platon analyses revealed the porous volume ratios are 80.2%, 80.0%, and 77.8% for 1, 1-NH₂, and for 1-Urea, respectively. Thermogravimetric measurements suggested 53, 51, and 48 wt % guest molecules in 1, 1-NH₂, and 1-Urea, respectively. 1-NH₂ and 1-Urea were precisely functionalized via the introduction of amino and urea functional groups into the pillar channels. The constructed MOF 1-Urea, incorporating both exposed copper active sites and accessible urea functional groups to substrates, presents high efficiency on catalytic CO₂ cycloaddition with propene oxide to produce cyclic carbonate in the yield of 98% with a TOF value of 136 h^-1 at 1 atm and room temperature. This synergic effect provides a new strategy for designing high-efficient catalysts for CO₂ chemical conversion under ambient conditions.

An effective strategy for creating asymmetric MOFs for chirality induction: a chiral Zr-based MOF for enantioselective epoxidation

A simple and rapid procedure was used to prepare chiral NU-1000 as a robust Zr-based MOF without complexity. The functionalization of NU-1000 was performed by utilizing chirall-(+)-tartaric acidviasolvent-assisted linker incorporation, resulting in [C-NU-1000]. A Mo-complex was immobilized onto chiral NU-1000 for enantioselective epoxidation.

Microwave-assisted synthesis of urea-containing zirconium metal–organic frameworks for heterogeneous catalysis of Henry reactions

A urea-containing UiO-68 isoreticular zirconium metal–organic framework with mixed dicarboxylate struts can work as an efficient hydrogen-bond-donating heterogeneous catalyst for Henry reactions of benzaldehydes and nitroalkanes.

Functional construction of a water-stable Tb-coordination polymer luminescent sensor for highly selective detection of picric acid in an aquatic environment

In order to achieve convenient and efficient detection of picric acid in a water environment, based on function-oriented strategy, we combine luminescence performance with recognition performance, taking into account the application conditions.

Syntheses, structural diversity, and photocatalytic-degradation properties for methylene blue of Co(ii) and Ni(ii) MOFs based on terephthalic acid and different imidazole bridging ligands

Six coordination polymers were constructed and characterized by X-ray diffraction, elemental analyses, infrared spectroscopy and thermogravimetric analysis.

The targeted design of dual-functional metal–organic frameworks (DF-MOFs) as highly efficient adsorbents for Hg2+ ions: synthesis for purpose

Designing adsorbents with accessible chelating sites and achieving high contaminant purification efficiency are still important to overcome environmental remediation challenges.

Tuning Molecular Interactions for Highly Reproducible and Efficient Formamidinium Perovskite Solar Cells via Adduct Approach

The Lewis acid-base adduct approach has been widely used to form uniform perovskite films, which has provided a methodological base for the development of high-performance perovskite solar cells. However, its incompatibility with formamidinium (FA)-based perovskites has impeded further enhancement of photovoltaic performance and stability. Here, we report an efficient and reproducible method to fabricate highly uniform FAPbI₃ films via the adduct approach. Replacement of the typical Lewis base dimethyl sulfoxide (DMSO) with N-methyl-2-pyrrolidone (NMP) enabled the formation of a stable intermediate adduct phase, which can be converted into a uniform and pinhole-free FAPbI₃ film. Infrared and computational analyses revealed a stronger interaction between NMP with the FA cation than DMSO, which facilitates the formation of a stable FAI·PbI₂·NMP adduct. On the basis of the molecular interactions with different Lewis bases, we proposed criteria for selecting the Lewis bases. Owed to the high film quality, perovskite solar cells with the highest PCE over 20% (stabilized PCE of 19.34%) and average PCE of 18.83 ± 0.73% were demonstrated.

Crystal Engineering for Catalysis

Crystal engineering relies upon the ability to predictively control intermolecular interactions during the assembly of crystalline materials in a manner that leads to a desired (and predetermined) set of properties. Economics, scalability, and ease of design must be leveraged with techniques that manipulate the thermodynamics and kinetics of crystal nucleation and growth. It is often challenging to exact simultaneous control over multiple physicochemical properties, such as crystal size, habit, chirality, polymorph, and composition. Engineered materials often rely upon postsynthesis (top-down) processes to introduce properties that would otherwise be challenging to attain through direct (bottom-up) approaches. We discuss the application of crystal engineering to heterogeneous catalysts with a focus on four general themes: ( a) tailored nanocrystal size, ( b) controlled environments surrounding active sites, ( c) tuned morphology with well-defined facets, and ( d) hierarchical materials with disparate pore size and active site distributions. We focus on nonporous materials, including metals and metal oxides, and two classes of porous materials: zeolites and metal organic frameworks. We review novel synthesis methods involving synergistic experimental and computational design approaches, the challenges facing catalyst development, and opportunities for future advancement in crystal engineering.

Cu(I) Coordination Polymers as the Green Heterogeneous Catalysts for Direct C-H Bonds Activation of Arylalkanes to Ketones in Water with Spatial Confinement Effect

To develop coordination polymers (CPs) as catalysts to selectively catalyze the reaction of C-H bond activation of arylalkanes to their homologous ketones, three new Cu(I)-based coordination polymers (Cu^I-CPs) [CuI(aas-TPB)]_n (1), [CuBr(ass-TPB)CH₃CN]_n (2), and {[Cu(ass-TPB)]Cl}_n (3) (TPB = N,N,N-tris(3-pyridinyl)-1,3,5-benzenetricarboxamide) were synthesized. Structural variations from a herringbone fashion one-dimensional framework of 1 to a two-dimensional framework of 2 containing a 48-membered macrocycle and a cationic three-dimensional framework of 3 filled with Cl^- anions were observed arising from the different halogen ions (I^-, Br^-, and Cl^-). 1-3 were used as the green heterogeneous catalysts to catalyze direct C-H bond activation reactions of arylalkanes to ketones under mild reaction conditions with water as solvent. Handy product separation, convenient reaction procedures, and recyclability of these catalysts make the catalytic system fascinating. Moreover, the Cu^I-CPs performed the reaction with high regioselectivity due to the unique spatial confinement effect of CPs.

Stable metal–organic frameworks as a host platform for catalysis and biomimetics

Recent years have witnessed the exploration and synthesis of an increasing number of metal–organic frameworks (MOFs). The utilization of stable MOFs as a platform for catalysis and biomimetics is discussed.

Pb⋯X (X = N, S, I) tetrel bonding interactions in Pb(ii) complexes: X-ray characterization, Hirshfeld surfaces and DFT calculations

We report the synthesis and X-ray characterization of four new Pb(ii) complexes of nicotinoylhydrazone and picolinoylhydrazone-based ligands and three different anionic co-ligands (acetate, thiocyanate and iodide) exhibiting relevant tetrel bonding interactions.