Synthesis and Chemistry of Titanacyclopentane and Titanacyclopropane Rings Supported by Aryloxide Ligation

Diastereoselective, titanium-mediated cyclization of omega-vinyl tethered imides

[reaction: see text] Diastereoselective reductive coupling reactions of omega-vinyl tethered cyclic imides are achieved by a preexisting stereocenter at an allylic position. Particularly noteworthy is the effective use of a 1:2 mixture of Ti(O-i-Pr)4 and n-BuLi to afford the N-acylhemiaminal products in good yields.

Dynamic Behavior of Chiral Sulfonimidoyl-Substituted Allyl and Alkyl (Dimethylamino)titanium(IV) Complexes: Metallotropic Shift, Reversible β-Hydride Elimination/Reinsertion, and ab Initio Calculations of Allyl and Alkyl Aminosulfoxonium Ylides

Variable-temperature (1)H and (13)C NMR spectroscopy of the sulfonimidoyl-substituted allyltitanium(IV) complexes E-1a-c and Z-1a-c, which carry diethylamino groups at the Ti atom, revealed a fast 1,3-C,N-shift of the Ti atom, leading to an equilibrium between the epimeric Calpha-titanium allyl complexes A and C and the N-titanium allyl aminosulfoxonium ylide B. Based on these findings a model for the reactions of E-1a-c and Z-1a-c with aldehydes is proposed, which features regio- and diastereoselective reactions of the N-titanium ylide B at the alpha-position and the Calpha-titanium complex A at the gamma-position. Model ab initio calculations of the methylene and allyl (dimethylamino)sulfoxonium ylides 10 and 14, respectively, revealed short Calpha-S bonds, a stabilization by both electrostatic interaction and negative hyperconjugation, and a low Calpha-S rotational barrier. The ylides preferentially adopt Calpha-S and Calpha-N conformations in which the lone pair orbital at the Calpha atom is periplanar to the S=O bond and that at the N atom periplanar to the Calpha-Ph bond. Variable-temperature NMR spectroscopy of the sulfonimidoyl-substituted alkyltitanium(IV) complex 16, which carries diethylamino groups at the Ti atom, revealed a dynamic behavior leading to a complete topomerization of all four methylene hydrogens of the Calpha-ethyl groups. Two fast processes are held responsible for the topomerization of the hydrogens of 16. The first one is a reversible intramolecular beta-hydride elimination/alkene-Ti-H insertion with the intermediate formation of a complex between (Et(2)N)TiH and a 1-alkenyl sulfoximine, and the second one consists of a reversible 1,3-C,N-shift of the Ti atom in combination with a Calpha-S bond rotation. Interestingly, the room-temperature NMR spectra of the corresponding sulfonimidoyl-substituted alkyltitanium(IV) complex 17, which carries isopropoxy groups at the Ti atom, give no indication of a similar dynamic behavior of this complex.

The Course of (R2R‘SiO)3TaCl2 (R = tBu, R‘ = H, Me, Ph, tBu (silox); R = iPr, R‘ = tBu, iPr) Reduction Is Dependent on Siloxide Size

Various sized siloxides (Cy(3)SiO > (t)Bu(3)SiO > (t)Bu(2)PhSiO > (t)Bu(2)MeSiO approximately (i)Pr(2)(t)BuSiO > (i)Pr(3)SiO > (t)Bu(2)HSiO) were used to make (R(2)R'SiO)(3)TaCl(2) (R = (t)Bu, R' = H (1-H), Me (1-Me), Ph (1-Ph), (t)Bu (1); R = (i)Pr, R' = (t)Bu (1-(i)Pr(2)); R = R' = (i)Pr (1-(i)Pr(3)); R = R' = (c)Hex (Cy)). Product analyses of sodium amalgam reductions of several dichlorides suggest that [(R(2)R'SiO)(3)Ta](2)(mu-Cl)(2) may be a common intermediate. When the siloxide is large (1-(t)Bu), formation of the Ta(III) species ((t)Bu(3)SiO)(3)Ta (6) occurs via disproportionation. When the siloxide is small, the Ta(IV) intermediate is stable (e.g., [((i)Pr(3)SiO)(3)Ta](2)(mu-Cl)(2) (2)), and when intermediate sized siloxides are used, solvent bond activation via unstable Ta(III) tris-siloxides is proposed to occur. Under hydrogen, reductions of 1-Me and 1-Ph provide Ta(IV) and Ta(V) hydrides [((t)Bu(2)MeSiO)(3)Ta](2)(micro-H)(2) (4-Me) and ((t)Bu(2)PhSiO)(3)TaH(2) (7-Ph), respectively.

Rhodium Complex-Catalyzed Cycloisomerization of Allenenes: Exo and Endo Cyclization Depending on the Auxiliary Ligands

In the presence of a catalytic amount of a rhodium(I) complex, allenenes undergo cycloisomerization reactions resulting in the selective formation of exo-alkylidenecarbocycles and heterocycles. In the catalytic system of rhodium complexes with triaryl phosphites, cyclic 1,4- or 1,5-dienes are formed in good to excellent yields in the formal exo-cyclization mode via the metallacycle intermediate having an exo-alkylidene moiety. In this cycloisomerization, (E)- and (Z)-allenenes are transformed stereospecifically to the corresponding cyclic (E)- and (Z)-1,4-dienes, respectively. On the other hand, the reactions under carbon monoxide atmosphere exclusively afford seven-membered-ring products through an endo-mode cyclization. The unusual cyclization involves an allylic C-H activation process. The allenene bearing a silicon substituent at the olefinic terminus incorporates carbon monoxide to give the corresponding [2+2+1] cycloaddition product. This result apparently indicates that the catalysis of the rhodium complex is explained in terms of the oxidative cyclization of an allenene to furnish the key exo-alkylidene metallacycle intermediate at the first stage of the catalysis.

Novel, stereoselective tricyclization of a dienyne by titanium aryloxide centers

Titanium centers supported by aryloxide ligation mediate the tricyclization of a dienyne via intramolecular insertion of an olefin into the titanium-vinyl bond of a titanacyclopent-2-ene.

Synthesis and structures of niobium(V) complexes stabilized by linear-linked aryloxide trimers

The preparation and characterization of a series of niobium(V) complexes that incorporate the linear-linked aryloxide trimers 2,6-bis(4,6-dimethylsalicyl)-4-tert-butylphenol [H3(Me-L)] and 2,6-bis(4-methyl-6-tert-butylsalicyl)-4-tert-butylphenol [H3(tBu-L)] are described. The chloride complex [Nb(Me-L)Cl2]2 (1) was prepared in high yield by reaction of NbCl5 with H3(Me-L) in toluene. In contrast, the analogous reaction with H3(tBu-L) gave a mixture of [Nb(tBu-L)Cl2]2 (2) and [Nb(de-tBu-L)Cl2]2 (3a). During the formation of 3a, one of tert-butyl groups at the ortho position in the tBu-L ligand was lost. When the NbCl5/H3(tBu-L) reaction was carried out in acetonitrile, Nb[H(tBu-L)]Cl3(NCMe) (4) was obtained. Heating a solution of 4 in toluene generated 2 and 3a. The isolated complex 4 underwent ligand redistribution in acetonitrile to produce Nb[H(tBu-L)]2Cl(NCMe) (5). Treatment of NbCl5 with Li3(tBu-L) in toluene afforded 2. The chloride ligands in 1 and 2 smoothly reacted with 4 equiv of MeMgI and LiStBu, resulting in [Nb(R-L)Me2]2 [R = Me (6), tBu (7)] and Nb(Me-L)(StBu)2 (8), respectively. A number of the above complexes have been characterized by X-ray crystallography. In the structures of 1, 2, and 6, the R-L ligand is bound to the metal center with a U-coordination mode, while an alternative S-conformation is adopted for 3a and 8. Complexes 4 and 5 contain a bidentate H(tBu-L) diphenoxide-monophenol ligand.

Modeling dioxygen-activating centers in non-heme diiron enzymes: carboxylate shifts in diiron(II) complexes supported by sterically hindered carboxylate ligands

General synthetic routes are described for a series of diiron(II) complexes supported by sterically demanding carboxylate ligands 2,6-di(p-tolyl)benzoate (Ar(Tol)CO(2)(-)) and 2,6-di(4-fluorophenyl)benzoate (Ar(4-FPh)CO(2)(-)). The interlocking nature of the m-terphenyl units in self-assembled [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (L = C(5)H(5)N (4); 1-MeIm (5)) promotes the formation of coordination geometries analogous to those of the non-heme diiron cores in the enzymes RNR-R2 and Delta 9D. Magnetic susceptibility and Mössbauer studies of 4 and 5 revealed properties consistent with weak antiferromagnetic coupling between the high-spin iron(II) centers. Structural studies of several derivatives obtained by ligand substitution reactions demonstrated that the [Fe(2)(O(2)CAr')(4)L(2)] (Ar' = Ar(Tol); Ar(4-FPh)) module is geometrically flexible. Details of ligand migration within the tetracarboxylate diiron core, facilitated by carboxylate shifts, were probed by solution variable-temperature (19)F NMR spectroscopic studies of [Fe(2)(mu-O(2)CAr(4-FPh))(2)-(O(2)CAr(4-FPh))(2)(THF)(2)] (8) and [Fe(2)(mu-O(2)CAr(4-FPh))(4)(4-(t)BuC(5)H(4)N)(2)] (12). Dynamic motion in the primary coordination sphere controls the positioning of open sites and regulates the access of exogenous ligands, processes that also occur in non-heme diiron enzymes during catalysis.

Mechanistic studies of the cycloisomerization of dimethyl diallylmalonate catalyzed by a cationic palladium phenanthroline complex

The mechanism of the cycloisomerization of dimethyl diallylmalonate (1) catalyzed by the cationic palladium phenanthroline complex [(phen)Pd(Me)CNCH(3)](+)[BAr(4)](-) [Ar = 3,5-C(6)H(3)(CF(3))(2)] (2) has been investigated. Heating a solution of 1 and 2 (5 mol %) in DCE at 40 degrees C led to zero-order decay of 1 to approximately 80% conversion (k(obs) = (7.1 +/- 0.3) x 10(-7) M s(-1)) with formation of a 27:2.2:1.0 mixture of 3,3-bis(carbomethoxy)-1,5-dimethylcyclopentene (3), 4,4-bis(carbomethoxy)-1,2-dimethylcyclopentene (4), and 1,1-bis(carbomethoxy)-4-methyl-3-methylenecyclopentane (5) and traces ( approximately 3.5%) of ethyl-substituted carbocycles 6 of the chemical formula C(12)H(18)O(4). Cyclopentenes 3 and 4 were formed both kinetically (3:4 = 30:1 at 40 degrees C) and via secondary isomerization of 5 (3:4 = 1:2.5 at 40 degrees C); the kinetic pathway accounted for the 93% of cyclopentene formation at 40 degrees C. Carbocycles 6 were formed predominantly (> or =90%) within the first two catalyst turnovers as byproducts of catalyst activation. Stoichiometric reaction of 1 and 2 at room temperature for 1.5 h led to the isolation of the palladium cyclopentyl chelate complex [carbohydrate structure-see text] in 26% yield as a approximately 2:1 mixture of isomers. The structure of trans,trans-7 was determined by X-ray crystallography. Kinetic studies of the formation of 7 established the rate law: rate = k[1][2], where k = (2.1 +/- 0.3) x 10(-2) M(-1) s(-1) (Delta G(*)(298K) = 19.7 +/- 0.1 kcal mol(-1)) at 25 degrees C. Thermolysis of 7 at 50 degrees C formed carbocycles 6 in 65% yield by GC analysis. (1)H and (13)C NMR analysis of an active catalyst system generated from 1 and a catalytic amount of 2 led to the identification of the cyclopentyl chelate complex [carbohydrate structure-see text] as the catalyst resting state. Cycloisomerization of 1-2,6-d(2) formed predominantly (approximately 90%) 3,3-bis(carbomethoxy)-5-deuterio-1-(deuteriomethyl)-5-methylcyclopentene (3-d(2)); no significant (< or =10%) kinetic isotope effect or intermolecular H/D exchange was observed. Cycloisomerization of 1-3,3,5,5-d(4) formed a 1:2.6 mixture of 3,3-bis(carbomethoxy)-2,4,4-trideuterio-1,5-dimethylcyclopentene (3-d(3)) and 3,3-bis(carbomethoxy)-2,4,4-trideuterio-5-(deuteriomethyl)-1-methylcyclo pentene (3-d(4)); while no significant (< or =10%) kinetic isotope effect was detected, extensive intermolecular H/D exchange was observed. These data are consistent with a mechanism involving hydrometalation of an olefin of 1, intramolecular carbometalation, isomerization via reversible beta-hydride elimination/addition, and turnover-limiting displacement of the cyclopentenes from palladium.

Ruthenium(II)-catalyzed isomer-selective cyclization of 1,6-dienes leading to exo-methylenecyclopentanes: unprecedented cycloisomerization mechanism involving ruthenacyclopentane(hydrido) intermediate

In the presence of a catalytic amount of ruthenium(II) complexes, [RuCl(2)(cod)](n)(), RuCl(2)(cod)(MeCN)(2), [RuCl(2)(nbd)](n)(), [RuCl(2)(CO)(3)](2), and Cp*Ru(cod)Cl, 1,6-dienes were effectively converted into the corresponding exo-methylenecyclopentanes in good to excellent yields with good isomer purity in i-PrOH at 90 degrees C. The alcoholic solvent was essential for the present catalytic cyclization, and the efficiency increased in the following order: t-BuOH << EtOH < or = i-PrOH. In contrast, a Ru(0) complex, (C(6)Me(6))Ru(cod), catalyzed the cycloisomerization only in 1,2-dichloroethane. The unusual isomer-selectivity occurred when a 1,7-octadiene was subjected to cyclization to give a similar exo-methylenecyclopentane isomer as the major product. The identical isomer selectivity was observed for the cyclization of unsymmetrical 1,6-dienes having one terminal- and one internal-alkene termini. On the basis of the results from the studies using the known ruthenium hydrides and deuterium-labeling substrates, the novel mechanism via the Ru(II) <--> Ru(IV) system involving a ruthenacyclopentane(hydrido) intermediate was proposed, which better explains the particular regiochemistry of the present cyclization than other previous mechanisms.

A theoretical study on the mechanism and diastereoselectivity of the Kulinkovich hydroxycyclopropanation reaction

A detailed mechanism for the Kulinkovich hydroxycyclopropanation reaction has been explored with density functional theory calculations on the reactions between R(1)COOMe and Ti(OMe)(2)(CH(2)CHR(2)) (R(1) and R(2) are hydrogen and alkyl groups). Addition of ester to titanacyclopropane is found to be fast, exothermic, and irreversible. It has a preference for the alpha-addition manifold over the beta-addition manifold in which its cycloinsertion transition states suffer from the steric repulsion between the R(2) and ester. The following intramolecular methoxy migration step is also exothermic with reasonable activation energy. The cyclopropane-forming step is the rate-determining step, which affords the experimentally observed cis-R(1)/R(2) diastereoselectivity in the alpha-addition manifold by generating cis-R(1)/R(2) 1,2-disubstituted cyclopropanol when R(1) is primary alkyl groups. On the contrary, the unfavored beta-addition manifold offers the diastereoselectivity contradicting the experimental observations. The effects of R(1) and R(2) on the regio- and stereoselectivity are also discussed.