Rh2(II,III) Catalysts with Chelating Carboxylate and Carboxamidate Supports: Electronic Structure and Nitrene Transfer Reactivity

Heteroleptic samarium(iii) halide complexes probed by fluorescence-detected L3-edge X-ray absorption spectroscopy

The novel series of heteroleptic Sm(iii) halide complexes provides the backdrop for a fluorescence-detected Lα₁ X-ray absorption spectroscopic study.

The addition of various oxidants to the near-linear Sm(ii) complex [Sm(N^††)₂] (1), where N^†† is the bulky bis(triisopropylsilyl)amide ligand {N(SiⁱPr₃)₂}, afforded a family of heteroleptic three-coordinate Sm(iii) halide complexes, [Sm(N^††)₂(X)] (X = F, 2-F; Cl, 2-Cl; Br, 2-Br; I, 2-I). In addition, the trinuclear cluster [{Sm(N^††)}₃(μ₂-I)₃(μ₃-I)₂] (3), which formally contains one Sm(ii) and two Sm(iii) centres, was isolated during the synthesis of 2-I. Complexes 2-X are remarkably stable towards ligand redistribution, which is often a facile process for heteroleptic complexes of smaller monodentate ligands in lanthanide chemistry, including the related bis(trimethylsilyl)amide {N(SiMe₃)₂} (N′′). Complexes 2-X and 3 have been characterised by single crystal X-ray diffraction, elemental analysis, multinuclear NMR, FTIR and electronic spectroscopy. The Lα₁ fluorescence-detected X-ray absorption spectra recorded at the Sm L₃-edge for 2-X exhibited a resolved pre-edge peak defined as an envelope of quadrupole-allowed 2p → 4f transitions. The X-ray absorption spectral features were successfully reproduced using time-dependent density functional theoretical (TD-DFT) calculations that synergistically support the experimental observations as well as the theoretical model upon which the electronic structure and bonding in these lanthanide complexes is derived.

DFT calculations of the defect structures, electronic structures, and EPR parameters for three Rh2+ centers in AgCl

The local structures for various Rh²⁺ centers in AgCl are theoretically studied using density functional theory (DFT) with periodic CP2K program. Through geometry optimizing, the stable ground states with minimal energies and electronic structures are obtained for the tetragonally elongated (T_E ), orthorhombically elongated (O_E ), and tetragonally compressed (T_C ) centers, and the corresponding g and hyperfine coupling tensors are calculated in ORCA level. The calculations reveal obvious Jahn-Teller elongation distortions of about 0.109 and 0.110 Å along [001] axis for T_E and O_E centers without and with 1 next nearest neighbor (nnn) cation vacancy V_Ag in [100] axis, respectively. Whereas T_C center with 1 nnn V_Ag along [001] axis exhibits moderate axial compression of about 0.066 Å due to the Jahn-Teller effect. For O_E and T_C centers with 1 nnn V_Ag , the ligand intervening in the central Rh²⁺ and the V_Ag is found to displace away from the V_Ag by about 0.028 and 0.024 Å, respectively. The present results are discussed and compared with those of the previous calculations based on the perturbation formulas by using the improved ligand field theory.

Inverting Steric Effects: Using "Attractive" Noncovalent Interactions To Direct Silver-Catalyzed Nitrene Transfer

Nitrene transfer (NT) reactions represent powerful and direct methods to convert C-H bonds into amine groups that are prevalent in many commodity chemicals and pharmaceuticals. The importance of the C-N bond has stimulated the development of numerous transition-metal complexes to effect chemo-, regio-, and diastereoselective NT. An ongoing challenge is to understand how subtle interactions between catalyst and substrate influence the site-selectivity of the C-H amination event. In this work, we explore the underlying reasons why Ag(tpa)OTf (tpa = tris(pyridylmethyl)amine) prefers to activate α-conjugated C-H bonds over 3° alkyl C(sp3)-H bonds and apply these insights to reaction optimization and catalyst design. Experimental results suggest possible roles of noncovalent interactions (NCIs) in directing the NT; computational studies support the involvement of π···π and Ag···π interactions between catalyst and substrate, primarily by lowering the energy of the directed transition state and reaction conformers. A simple Hess's law relationship can be employed to predict selectivities for new substrates containing competing NCIs. The insights presented herein are poised to inspire the design of other catalyst-controlled C-H functionalization reactions.

Collective Approach to Advancing C-H Functionalization

C-H functionalization is a very active research field that has attracted the interest of scientists from many disciplines. This Outlook describes the collaborative efforts within the NSF CCI Center for Selective C-H Functionalization (CCHF) to develop catalyst-controlled selective methods to enhance the synthetic potential of C-H functionalization.

Tunable, Chemo- and Site-Selective Nitrene Transfer Reactions through the Rational Design of Silver(I) Catalysts

Carbon-nitrogen (C-N) bonds are ubiquitous in pharmaceuticals, agrochemicals, diverse bioactive natural products, and ligands for transition metal catalysts. An effective strategy for introducing a new C-N bond into a molecule is through transition metal-catalyzed nitrene transfer chemistry. In these reactions, a metal-supported nitrene can either add across a C═C bond to form an aziridine or insert into a C-H bond to furnish the corresponding amine. Typical catalysts for nitrene transfer include Rh₂L_n and Ru₂L_n complexes supported by bridging carboxylate and related ligands, as well as complexes based on Cu, Co, Ir, Fe, and Mn supported by porphyrins and related ligands. A limitation of metal-catalyzed nitrene transfer is the ability to predictably select which specific site will undergo amination in the presence of multiple reactive groups; thus, many reactions rely primarily on substrate control. Achieving true catalyst-control over nitrene transfer would open up exciting possibilities for flexible installation of new C-N bonds into hydrocarbons, natural product-inspired scaffolds, existing pharmaceuticals or biorenewable building blocks. Silver-catalyzed nitrene transfer enables flexible control over the position at which a new C-N bond is introduced. Ag(I) supported by simple N-donor ligands accommodates a diverse range of coordination geometries, from linear to tetrahedral to seesaw, enabling the electronic and steric parameters of the catalyst to be tuned independently. In addition, the ligand, Ag salt counteranion, Ag/ligand ratio and the solvent all influence the fluxional and dynamic behavior of Ag(I) complexes in solution. Understanding the interplay of these parameters to manipulate the behavior of Ag-nitrenes in a predictable manner is a key design feature of our work. In this Account, we describe successful applications of a variety of design principles to tunable, Ag-catalyzed aminations, including (1) changing Ag/ligand ratios to influence chemoselectivity, (2) manipulating the steric environment of the catalyst to achieve site-selective C-H bond amination, (3) promoting noncovalent interactions between Ag/substrate or substrate/ligand to direct C-H functionalization, and (4) dictating the substrate's trajectory of approach to the Ag-nitrene. Our catalysts distinguish between the aminations of various types of C-H bonds, including tertiary C(sp³)-H, benzylic, allylic, and propargylic C-H bonds. Efforts in asymmetric nitrene transfer reactions catalyzed by Ag(I) complexes are also described.

Nitrene Radical Intermediates in Catalytic Synthesis

Nitrene radical complexes are reactive intermediates with discrete spin density at the nitrogen-atom of the nitrene moiety. These species have become important intermediates for organic synthesis, being invoked in a broad range of C-H functionalization and aziridination reactions. Nitrene radical complexes have intriguing electronic structures, and are best described as one-electron reduced Fischer type nitrenes. They can be generated by intramolecular single electron transfer to the "redox non-innocent" nitrene moiety at the metal. Nitrene radicals generated at open-shell cobalt(II) have thus far received most attention in terms of spectroscopic characterization, reactivity screening, catalytic nitrene-transfer reactions and (computational and experimental) mechanistic studies, but some interesting iron and precious metal catalysts have also been employed in related reactions involving nitrene radicals. In some cases, redox-active ligands are used to facilitate intramolecular single electron transfer from the complex to the nitrene moiety. Organic azides are among the most attractive nitrene precursors in this field, typically requiring pre-activated organic azides (e.g. RSO₂ N₃ , (RO)₂ P(=O)N₃ , ROC(=O)N₃ and alike) to achieve efficient and selective catalysis. Challenging, non-activated aliphatic organic azides were recently added to the palette of reagents useful in synthetically relevant reactions proceeding via nitrene radical intermediates. This concept article describes the electronic structure of nitrene radical complexes, emphasizes on their usefulness in the catalytic synthesis of various organic products, and highlights the important developments in the field.

Transition Metal-Catalyzed C-H Amination: Scope, Mechanism, and Applications

Catalytic transformation of ubiquitous C-H bonds into valuable C-N bonds offers an efficient synthetic approach to construct N-functionalized molecules. Over the last few decades, transition metal catalysis has been repeatedly proven to be a powerful tool for the direct conversion of cheap hydrocarbons to synthetically versatile amino-containing compounds. This Review comprehensively highlights recent advances in intra- and intermolecular C-H amination reactions utilizing late transition metal-based catalysts. Initial discovery, mechanistic study, and additional applications were categorized on the basis of the mechanistic scaffolds and types of reactions. Reactivity and selectivity of novel systems are discussed in three sections, with each being defined by a proposed working mode.

1,3-N,O-Complexes of late transition metals. Ligands with flexible bonding modes and reaction profiles

1,3-N,O-Chelating ligands are ubiquitous in nature owing to their occurrence as α-chiral amino acids in metalloproteins.

Catalytic C–H amination at its limits: challenges and solutions

Pushing C–H amination to its limits fosters innovative synthetic solutions and offers a deeper understanding of the reaction mechanism and scope.

A comparative study of inter- and intramolecular C–H aminations: mechanism and site selectivity

The similarities and differences of inter- and intramolecular aminations are discussed, with an emphasis on correlation between pathway and site-selectivity.

Catalyst-Controlled and Tunable, Chemoselective Silver-Catalyzed Intermolecular Nitrene Transfer: Experimental and Computational Studies

The development of new catalysts for selective nitrene transfer is a continuing area of interest. In particular, the ability to control the chemoselectivity of intermolecular reactions in the presence of multiple reactive sites has been a long-standing challenge in the field. In this paper, we demonstrate examples of silver-catalyzed, nondirected, intermolecular nitrene transfer reactions that are both chemoselective and flexible for aziridination or C-H insertion, depending on the choice of ligand. Experimental probes present a puzzling picture of the mechanistic details of the pathways mediated by [(tBu3tpy)AgOTf]2 and (tpa)AgOTf. Computational studies elucidate these subtleties and provide guidance for the future development of new catalysts exhibiting improved tunability in group transfer reactions.

Insight into the mechanism and site-selectivity of Rh2II,II(esp)2-catalyzed intermolecular C–H amination

The mechanisms and site-selective determinants of Rh₂^II,II(esp)₂-catalyzed intermolecular C–H bond aminations of three isoamylbenzene-derived substrates, p-R–C₆H₄(CH₂)₂CH(CH₃)₂ (R = OCH₃, H, CF₃), have been investigated by the density functional theory (BPW91) method.