Surface Charge Visualization at Viable Living Cells

Scanning Ion Conductance Microscopy: Quantitative Nanopipette Delivery-Substrate Electrode Collection Measurements and Mapping

Scanning ion conductance microscopy (SICM) is becoming a powerful multifunctional tool for probing and analyzing surfaces and interfaces. This work outlines methodology for the quantitative controlled delivery of ionic redox-active molecules from a nanopipette to a substrate electrode, with a high degree of spatial and temporal precision. Through control of the SICM bias applied between a quasi-reference counter electrode (QRCE) in the SICM nanopipette probe and a similar electrode in bulk solution, it is shown that ionic redox species can be held inside the nanopipette, and then pulse-delivered to a defined region of a substrate positioned beneath the nanopipette. A self-referencing hopping mode imaging protocol is implemented, where reagent is released in bulk solution (reference measurement) and near the substrate surface at each pixel in an image, with the tip and substrate currents measured throughout. Analysis of the tip and substrate current data provides an improved understanding of mass transport and nanoscale delivery in SICM and a new means of synchronously mapping electrode reactivity, surface topography, and charge. Experiments on Ru(NH₃)₆³⁺ reduction to Ru(NH₃)₆²⁺ and dopamine oxidation in aqueous solution at a carbon fiber ultramicroelectrode (UME), used as the substrate, illustrate these aspects. Finite element method (FEM) modeling provides quantitative understanding of molecular delivery in SICM. The approach outlined constitutes a new methodology for electrode mapping and provides improved insights on the use of SICM for controlled delivery to interfaces generally.

Advanced Nanoscale Approaches to Single-(Bio)entity Sensing and Imaging

Individual (bio)chemical entities could show a very heterogeneous behaviour under the same conditions that could be relevant in many biological processes of significance in the life sciences. Conventional detection approaches are only able to detect the average response of an ensemble of entities and assume that all entities are identical. From this perspective, important information about the heterogeneities or rare (stochastic) events happening in individual entities would remain unseen. Some nanoscale tools present interesting physicochemical properties that enable the possibility to detect systems at the single-entity level, acquiring richer information than conventional methods. In this review, we introduce the foundations and the latest advances of several nanoscale approaches to sensing and imaging individual (bio)entities using nanoprobes, nanopores, nanoimpacts, nanoplasmonics and nanomachines. Several (bio)entities such as cells, proteins, nucleic acids, vesicles and viruses are specifically considered. These nanoscale approaches provide a wide and complete toolbox for the study of many biological systems at the single-entity level.

Biological imaging with scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) is a powerful and versatile technique for visualizing the local electrochemical activity of a surface as an ultramicroelectrode tip is moved towards or over a sample of interest using precise positioning systems. In comparison with other scanning probe techniques, SECM not only enables topographical surface mapping but also gathers chemical information with high spatial resolution. Considerable progress has been made in the analysis of biological samples, including living cells and immobilized biomacromolecules such as enzymes, antibodies and DNA fragments. Moreover, combinations of SECM with comple-mentary analytical tools broadened its applicability and facilitated multi-functional analysis with extended life science capabilities. The aim of this review is to present a brief topical overview on recent applications of biological SECM, with particular emphasis on important technical improvements of this surface imaging technique, recommended applications and future trends.

Local collection, reaction and analysis with theta pipette emitters

A mobile nanofluidic device based on theta pipettes was developed for "collect-react-analyze" measurements of small volumes of a sample collected locally from biological samples. Specifically, we demonstrate execution of local reactions inside single cells and on Pseudomonas aeruginosa biofilms for targeted analysis of metabolites. Nanoliter volumes of the sample, post-reaction, were delivered to a mass spectrometer via electrospray ionization (ESI) for chemical analysis. A new strategy was developed where the additional barrel of a theta pipette was utilized both to enable chemical manipulations after sample collection and to electrospray the nanoliter sample volumes collected directly from the pipette tip. This strategy proved a robust method for ESI from nanometer sized tips without clogging or degradation of the emitter and obviated the need to coat glass pipettes with a conductive metal coating. Chemical reactions investigated include acid catalyzed degradation of oligosaccharides inside the pipette tip to increase the detection sensitivity of minor metabolites found in Allium cepa cells. Additionally, phenylboronic acid complexation of carbohydrates from single cells and liposaccharides from biofilms was also performed inside the pipette tip for selective detection of carbohydrates and liposaccharides with cis-diols.

Correlative Stimulated Emission Depletion and Scanning Ion Conductance Microscopy

Correlation microscopy combining fluorescence and scanning probe or electron microscopy is limited to fixed samples due to the sample preparation and nonphysiological imaging conditions required by most probe or electron microscopy techniques. Among the few scanning probe techniques that allow imaging of living cells under physiological conditions, scanning ion conductance microscopy (SICM) has been shown to be the technique that minimizes the impact on the investigated sample. However, combinations of SICM and fluorescence microscopy suffered from the mismatch in resolution due to the limited resolution of conventional light microscopy. In the last years, the diffraction limit of light microscopy has been circumvented by various techniques, one of which is stimulated emission depletion (STED) microscopy. Here, we aimed at demonstrating the combination of STED and SICM. We show that both methods allow recording a living cellular specimen and provide a SICM and STED image of the same sample, which allowed us to correlate the membrane surface topography and the distribution of the cytoskeletal protein actin. Our proof-of-concept study exemplifies the benefit of correlating SICM with a subdiffraction fluorescence method and might form the basis for the development of a combined instrument that would allow the simultaneous recording of subdiffraction fluorescence and topography information.

Fabrication and Use of Nanopipettes in Chemical Analysis

This review summarizes progress in the fabrication, modification, characterization, and applications of nanopipettes since 2010. A brief history of nanopipettes is introduced, and the details of fabrication, modification, and characterization of nanopipettes are provided. Applications of nanopipettes in chemical analysis are the focus in several cases, including recent progress in imaging; in the study of single molecules, single nanoparticles, and single cells; in fundamental investigations of charge transfer (ion and electron) reactions at liquid/liquid interfaces; and as hyphenated techniques combined with other methods to study the mechanisms of complicated electrochemical reactions and to conduct bioanalysis.

Electrochemical imaging of cells and tissues

This minireview summarizes the recent achievements of electrochemical imaging platforms to map cellular functions in biological specimens using electrochemical scanning nano/micro-probe microscopy and 2D chips containing microelectrode arrays.

The technological and experimental progress in electrochemical imaging of biological specimens is discussed with a view on potential applications for skin cancer diagnostics, reproductive medicine and microbial testing. The electrochemical analysis of single cell activity inside cell cultures, 3D cellular aggregates and microtissues is based on the selective detection of electroactive species involved in biological functions. Electrochemical imaging strategies, based on nano/micrometric probes scanning over the sample and sensor array chips, respectively, can be made sensitive and selective without being affected by optical interference as many other microscopy techniques. The recent developments in microfabrication, electronics and cell culturing/tissue engineering have evolved in affordable and fast-sampling electrochemical imaging platforms. We believe that the topics discussed herein demonstrate the applicability of electrochemical imaging devices in many areas related to cellular functions.

New Frontiers and Challenges for Single-Cell Electrochemical Analysis

Previous measurements of cell populations might obscure many important cellular differences, and new strategies for single-cell analyses are urgently needed to re-examine these fundamental biological principles for better diagnosis and treatment of diseases. Electrochemistry is a robust technique for the analysis of single living cells that has the advantages of minor interruption of cellular activity and provides the capability of high spatiotemporal resolution. The achievements of the past 30 years have revealed significant information about the exocytotic events of single cells to elucidate the mechanisms of cellular activity. Currently, the rapid developments of micro/nanofabrication and optoelectronic technologies drive the development of multifunctional electrodes and novel electrochemical approaches with higher resolution for single cells. In this Perspective, three new frontiers in this field, namely, electrochemical microscopy, intracellular analysis, and single-cell analysis in a biological system (i.e., neocortex and retina), are reviewed. The unique features and remaining challenges of these techniques are discussed.

3D electrochemical and ion current imaging using scanning electrochemical-scanning ion conductance microscopy

Local cell-membrane permeability and ionic strength are important factors for maintaining the functions of cells. Here, we measured the spatial electrochemical and ion concentration profile near the sample surface with nanoscale resolution using scanning electrochemical microscopy (SECM) combined with scanning ion-conductance microscopy (SICM). The ion current feedback system is an effective way to control probe-sample distance without contact and monitor the kinetic effect of mediator regeneration and the chemical concentration profile. For demonstrating 3D electrochemical and ion concentration mapping, we evaluated the reaction rate of electrochemical mediator regeneration on an unbiased conductor and visualized inhomogeneous permeability and the ion concentration 3D profile on a single fixed adipocyte cell surface.

On the physics of both surface overcharging and charge reversal at heterophase interfaces

A series of Monte Carlo simulations are employed to reveal the physics of both surface overcharging and charge reversal at a negatively charged dielectric interface exposed to a bulk solution containing a +2:−1 electrolyte in the absence and presence of a monovalent salt.

Quantitative Visualization of Nanoscale Ion Transport

Understanding ion transport properties at various interfaces, especially at small length scales, is critical in advancing our knowledge of membrane materials and cell biology. Recently, we described potentiometric-scanning ion conductance microscopy (P-SICM) for ion-conductance measurement in polymer membranes and epithelial cell monolayers at discrete points in a sample. Here, we combine hopping mode techniques with P-SICM to allow simultaneous nanometer-scale conductance and topography mapping. First validated with standard synthetic membranes and then demonstrated in living epithelial cell monolayers under physiological conditions, this new method allows direct visualization of heterogeneous ion transport of biological samples for the first time. These advances provide a noncontact local probe, require no labeling, and present a new tool for quantifying intrinsic transport properties of a variety of biological samples.

Simultaneous Topography and Reaction Flux Mapping at and around Electrocatalytic Nanoparticles

The characterization of electrocatalytic reactions at individual nanoparticles (NPs) is presently of considerable interest but very challenging. Herein, we demonstrate how simple-to-fabricate nanopipette probes with diameters of approximately 30 nm can be deployed in a scanning ion conductance microscopy (SICM) platform to simultaneously visualize electrochemical reactivity and topography with high spatial resolution at electrochemical interfaces. By employing a self-referencing hopping mode protocol, whereby the probe is brought from bulk solution to the near-surface at each pixel, and with potential-time control applied at the substrate, current measurements at the nanopipette can be made with high precision and resolution (30 nm resolution, 2600 pixels μm^-2, <0.3 s pixel^-1) to reveal a wealth of information on the substrate physicochemical properties. This methodology has been applied to image the electrocatalytic oxidation of borohydride at ensembles of AuNPs on a carbon fiber support in alkaline media, whereby the depletion of hydroxide ions and release of water during the reaction results in a detectable change in the ionic composition around the NPs. Through the use of finite element method simulations, these observations are validated and analyzed to reveal important information on heterogeneities in ion flux between the top of a NP and the gap at the NP-support contact, diffusional overlap and competition for reactant between neighboring NPs, and differences in NP activity. These studies highlight key issues that influence the behavior of NP assemblies at the single NP level and provide a platform for the use of SICM as an important tool for electrocatalysis studies.

3D Printed and Microcontrolled: The One Hundred Dollars Scanning Electrochemical Microscope

The design and fabrication of a versatile and low-cost electrochemical-scanning probe microscope (EC-SPM) is presented. The proposed equipment relies on the use of modern prototyping tools such as 3D printers and microcontroller boards and only a few "off-the-shelf" parts to deliver a simple yet powerful EC-SPM equipment capable of performing simple space-resolved electrochemical measurements. The equipment was able to perform space-resolved electrochemical measurements using a platinum ultramicroelectrode (UME) as the working electrode on a scanning electrochemical microscopy (SECM) configuration and was used to record approach curves, line scans, and array scans over an insulating substrate. The performance of the proposed equipment was found to be adequate for simple SECM measurements under hindered diffusion conditions. Because of its flexible design (software and hardware), more complex array scan patterns, only found on high-end EC-SPM setups such as hopping mode scan, were easily implemented on the built equipment. Despite its simplicity, the versatility and low cost of the proposed design make it an attractive alternative as a teaching platform as well as a platform for developing more elaborate EC-SPM setups.

Multifunctional scanning ion conductance microscopy

Scanning ion conductance microscopy (SICM) is a nanopipette-based technique that has traditionally been used to image topography or to deliver species to an interface, particularly in a biological setting. This article highlights the recent blossoming of SICM into a technique with a much greater diversity of applications and capability that can be used either standalone, with advanced control (potential-time) functions, or in tandem with other methods. SICM can be used to elucidate functional information about interfaces, such as surface charge density or electrochemical activity (ion fluxes). Using a multi-barrel probe format, SICM-related techniques can be employed to deposit nanoscale three-dimensional structures and further functionality is realized when SICM is combined with scanning electrochemical microscopy (SECM), with simultaneous measurements from a single probe opening up considerable prospects for multifunctional imaging. SICM studies are greatly enhanced by finite-element method modelling for quantitative treatment of issues such as resolution, surface charge and (tip) geometry effects. SICM is particularly applicable to the study of living systems, notably single cells, although applications extend to materials characterization and to new methods of printing and nanofabrication. A more thorough understanding of the electrochemical principles and properties of SICM provides a foundation for significant applications of SICM in electrochemistry and interfacial science.

Write-Read 3D Patterning with a Dual-Channel Nanopipette

Nanopipettes are becoming extremely versatile and powerful tools in nanoscience for a wide variety of applications from imaging to nanoscale sensing. Herein, the capabilities of nanopipettes to build complex free-standing three-dimensional (3D) nanostructures are demonstrated using a simple double-barrel nanopipette device. Electrochemical control of ionic fluxes enables highly localized delivery of precursor species from one channel and simultaneous (dynamic and responsive) ion conductance probe-to-substrate distance feedback with the other for reliable high-quality patterning. Nanopipettes with 30-50 nm tip opening dimensions of each channel allowed confinement of ionic fluxes for the fabrication of high aspect ratio copper pillar, zigzag, and Γ-like structures, as well as permitted the subsequent topographical mapping of the patterned features with the same nanopipette probe as used for nanostructure engineering. This approach offers versatility and robustness for high-resolution 3D "printing" (writing) and read-out at the nanoscale.

Frontiers in Nanoscale Electrochemical Imaging: Faster, Multifunctional, and Ultrasensitive

A wide range of interfacial physicochemical processes, from electrochemistry to the functioning of living cells, involve spatially localized chemical fluxes that are associated with specific features of the interface. Scanning electrochemical probe microscopes (SEPMs) represent a powerful means of visualizing interfacial fluxes, and this Feature Article highlights recent developments that have radically advanced the speed, spatial resolution, functionality, and sensitivity of SEPMs. A major trend has been a coming together of SEPMs that developed independently and the use of established SEPMs in completely new ways, greatly expanding their scope and impact. The focus is on nanopipette-based SEPMs, including scanning ion conductance microscopy (SICM), scanning electrochemical cell microscopy (SECCM), and hybrid techniques thereof, particularly with scanning electrochemical microscopy (SECM). Nanopipette-based probes are made easily, quickly, and cheaply with tunable characteristics. They are reproducible and can be fully characterized. Their response can be modeled in considerable detail so that quantitative maps of chemical fluxes and other properties (e.g., local charge) can be obtained and analyzed. This article provides an overview of the use of these probes for high-speed imaging, to create movies of electrochemical processes in action, to carry out multifunctional mapping such as simultaneous topography-charge and topography-activity, and to create nanoscale electrochemical cells for the detection, trapping, and analysis of single entities, particularly individual molecules and nanoparticles (NPs). These studies provide a platform for the further application and diversification of SEPMs across a wide range of interfacial science.