Sub-4 nm PtZn Intermetallic Nanoparticles for Enhanced Mass and Specific Activities in Catalytic Electrooxidation Reaction

An Investigation into the Bulk and Surface Phase Transformations of Bimetallic Pd-In/Al2O3 Catalyst during Reductive and Oxidative Treatments In Situ

A series of oxidative treatments of PdIn-supported intermetallic nanoparticles at different temperatures were performed. The bulk and surface structure of catalyst during phase transformation was investigated by bulk- and surface-sensitive techniques (in situ XAFS, DRIFTS of adsorbed CO). It was found that comparison of palladium and indium fractions in bulk and on the surface suggests the formation of a «core-shell» structure. According to obtained results, the core consists of In-depleted intermetallic compound or inhomogeneous bimetallic phase with the inner core of metallic Pd, when a mixture of indium oxide, metallic palladium and small part of PdIn is present on the surface.

Trimetallic synergy in dendritic intermetallic PtSnBi nanoalloys for promoting electrocatalytic alcohol oxidation

Developing effective and robust novel electrocatalysts for direct alcohol fuel cells has been gaining much attention. However, the widely used Pt catalyst suffers from limitations including the sluggish kinetics, severe CO poisoning, and catalyst lost caused by aggregation and Ostwald ripening during alcohol oxidation reaction. Herein, dendritic intermetallic PtSnBi nanoalloys were synthesized via a facile hydrothermal approach with high electrocatalytic performance and enhanced CO resistance for methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) owing to the synergism of the chosen three elements and unique three-dimensional morphology. Specifically, the PtSnBi nanoalloys display 4.6 and 6.7 times higher of mass activity (7.02 A mg^-1_Pt) and specific activity (16.65 mA cm^-2) toward MOR than those of commercial Pt/C, respectively. The mass activity of PtSnBi nanoalloys still retains 75.7% of the initial value after 800 cycles of stability test, superior to Pt/C (38.0%). The dual-functional effect of Sn, optimized electronic structure by the ligand effect, and unique atomic arrangement are responsible for the enhanced MOR activity and stability of PtSnBi nanoalloys. Furthermore, the PtSnBi nanoalloys with highlighted anti-CO poisoning capacity also improve the electrocatalytic performance toward EOR, indicating their great promise as broad energy electrocatalysts.

Pt-based (Zn, Cu) nanodendrites with enhanced catalytic efficiency and durability toward methanol electro-oxidation via trace Ir-doping engineering

Pt-based alloy nanomaterials with nanodendrites (NDs) structures are efficient electrocatalysts for methanol oxidation reaction (MOR), however their durability is greatly limited by the issue of transition metals dissolution. In this work, a facile trace Ir-doping strategy was proposed to fabricate Ir-PtZn and Ir-PtCu alloy NDs catalysts in aqueous medium, which significantly improved the electrocatalytic activity and durability for MOR. The as-prepared Ir-PtZn/Cu NDs catalysts showed distinct dendrites structures with the averaged diameter of 4.1 nm, and trace Ir doping subsequently improved the utilization of Pt atoms and promoted the oxidation efficiency of methanol. The electrochemical characterizations further demonstrated that the obtained Ir-PtZn/Cu NDs possessed enhanced mass activities of nearly 1.23 and 1.28-fold higher than those of undoped PtZn and PtCu, and approximately 2.35 and 2.67-fold higher than that of Pt/C in acid medium. More excitingly, after long-term durability test, the proposed Ir-PtZn and Ir-PtCu NDs still retained about 88.9% and 91.6% of its initial mass activities, which further highlights the key role of Ir-doping in determining catalyst performance. This work suggests that trace Ir-doping engineering could be a promising way to develop advanced electrocatalysts toward MOR for direct methanol fuel cell (DMFC) applications.

Template-Directed Rapid Synthesis of Pd-Based Ultrathin Porous Intermetallic Nanosheets for Efficient Oxygen Reduction

Atomically ordered intermetallic nanoparticles exhibit improved catalytic activity and durability relative to random alloy counterparts. However, conventional methods with time-consuming and high-temperature syntheses only have rudimentary capability in controlling the structure of intermetallic nanoparticles, hindering advances of intermetallic nanocatalysts. We report a template-directed strategy for rapid synthesis of Pd-based (PdM, M=Pb, Sn and Cd) ultrathin porous intermetallic nanosheets (UPINs) with tunable sizes. This strategy uses preformed seeds, which act as the template to control the deposition of foreign atoms and the subsequent interatomic diffusion. Using the oxygen reduction reaction (ORR) as a model reaction, the as-synthesized Pd₃ Pb UPINs exhibit superior activity, durability, and methanol tolerance. The favored geometrical structure and interatomic interaction between Pd and Pb in Pd₃ Pb UPINs are concluded to account for the enhanced ORR performance.

Bimetallic Nanoparticles Associating Noble Metals and First-Row Transition Metals in Catalysis

Bimetallic nanoparticles (NPs) are complex systems with properties that far exceed those of the individual constituents. In particular, association of a noble metal and a first-row transition metal are attracting increasing interest for applications in catalysis, electrocatalysis, and magnetism, among others. Such objects display a rich structural chemistry thanks to their ability to form intermetallic phases, random alloys, or core-shell species. However, under reaction conditions, the surface of these nanostructures may be modified due to migration, segregation, or isolation of single atoms, leading to the formation of original structures with enhanced catalytic activity. In this respect, Zakhtser et al. report in this issue of ACS Nano the synthesis and study of the chemical evolution of the surface of a series of PtZn nanostructured alloys. In this Perspective, we report some selected examples of bimetallic nanocatalysts and their increased activity compared to that of the corresponding pure noble metal, with a special focus on Pt-based systems. We also discuss the mobility of the species present on the catalyst surface and the electronic influence of one metal to the other.

Zinc-Coordination Polymer-Derived Porous Carbon-Supported Stable PtM Electrocatalysts for Methanol Oxidation Reaction

Porous carbon (PC) is obtained by carbonizing a zinc-coordination polymer (MOF-5) at 950 °C and PtM (M = Fe, Co, Ni, Cu, Zn) nanoparticles (NPs), which are deposited on PC using the polyol method. Structural and morphological characterizations of the synthesized materials are carried out by powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HRTEM), and the porosity was determined using a N2 adsorption/desorption technique. The results revealed that PtM NPs are alloyed in the fcc phase and are well dispersed on the surface of PC. The electrochemical results show that PtM/PC 950 catalysts have higher methanol oxidation reaction (MOR) performances than commercial Pt/C (20%) catalysts. After 3000 s of chronoamperometry (CA) test, the MOR performances decreased in the order of Pt1Cu1/PC 950 > Pt1Ni1/PC 950 > Pt1Fe1/PC 950 > Pt1Zn1/PC 950 > Pt1Co1/PC 950. The high MOR activities of the synthesized catalysts are attributed to the effect of M on methanol dissociative chemisorption and improved tolerance of Pt against CO poisoning. The high specific surface area and porosity of the carbon support have an additional effect in boosting the MOR activities. Screening of the first row transition metals (d 5+n , n = 1, 2, 3, 4, 5) alloyed with Pt binary catalysts for MOR shows that Pt with d 8 (Ni) and d 9 (Cu) transition metals, in equivalent atomic ratios, are good anode catalysts for alcohol fuel cells.

Atomically dispersed Ru in Pt3Sn intermetallic alloy as an efficient methanol oxidation electrocatalyst

We successfully fabricate a novel concave nanostructure that is composed of atomically dispersed Ru atoms in Pt₃Sn nanoconcaves (Ru-Pt₃Sn NCs), which shows enhanced performance in methanol electroxidation compared to commercial Pt/C. This could be ascribed to the stable intermetallic structure and active surface structure, as well as the synergy among Pt, Sn and Ru.

Synthesis of raspberry-like antimony-platinum (SbPt) nanoparticles as highly active electrocatalysts for hydrogen evolution reaction

Binary transition metals can facilitate the hydrogen evolution reaction (HER) through the synergistic integration of different electrochemical properties. To determine binary transition metals that are highly active, Greely et al. conducted a simulation of 256 different binary transition metals. They demonstrated that BiPt, PtRu, AsPt, SbPt, BiRh, RhRe, PtRe, AsRu, IrRu, RhRu, IrRe, and PtRh could be used as efficient electrocatalysts for HER. However, only few of them are synthesized and used as electrocatalysts. In this work, we report the synthesis of the raspberry-like antimony-platinum (SbPt) nanoparticles (NPs) via a colloidal nanocrystal synthesis. These NPs exhibited efficient activity with a low overpotential of 27 mV to reach 10 mA cm^-2 in acidic media. We conducted long-term durability test for 90,000 s under an applied voltage of 0.5 V (vs. RHE) and cycling tests of over 10,000 cycles under an applied voltage of 0.1 to -0.5 V (vs. RHE). The high activity exhibited by the raspberry-like SbPt NPs may be due to the following reasons: (1) the raspberry-like SbPt NPs exhibited versatile active exposed (110), (100), (101), and (012) facets as efficient HER catalysts, and (2) as confirmed by both the density functional theory (DFT) simulation and experimental results, the presence of Sb 3d subsurface broadened the Pt surface d-band, which caused synergistic effects on water splitting. In summary, synthesis of the new colloidal raspberry-like SbPt NPs is essential to elucidate the fundamental properties of the nanomaterial and nanostructure design. This study could facilitate the development of Pt-group materials that can be used as HER catalysts.

A mass-producible integrative structure Pt alloy oxygen reduction catalyst synthesized with atomically dispersive metal-organic framework precursors

Oxygen reduction reaction (ORR) catalyst is one of the most significant influential factors for the application of proton exchange membrane fuel cells. This work introduces a mass-producible high-performance PtZn alloy integrative structure ORR catalyst, synthesized with the atomically dispersive metal-organic framework precursors. This PtZn catalyst displays excellent catalytic activity with the onset reduction potential of 1.0 V_RHE@ 0.16 mA cm^-2 (Reversible hydrogen electrode; RHE) and the half-wave potential of 0.934 V_RHE for the ORR catalysis. The calculated specific activity and mass activity at 0.9 V are 9.44 A m^-2 and 544 A g_Pt^-1, respectively, which are 5.62 times and 5.77 times as high as the commercial Pt/C. The mass activity is remarkably higher than the target put forward by the Department of Energy (DOE; 440 A g_Pt^-1). Furthermore, this PtZn catalyst also exhibits outstanding stability after the 10,000 potential cyclic degeneration test. The ORR current is much higher than Pt/C in the whole potential range not only before but also after the 10,000 potential cycles with identical Pt loading. This catalyst has a multifarious active-site catalytic structure with PtZn alloyed particles and atomically dispersive metal-N active sites on the N-doped graphited carbon matrix, exhibiting appealing ORR catalytic activity and sound stability for the application and scalable production of fuel cell catalysts.

Low-PGM and PGM-Free Catalysts for Proton Exchange Membrane Fuel Cells: Stability Challenges and Material Solutions

Fuel cells as an attractive clean energy technology have recently regained popularity in academia, government, and industry. In a mainstream proton exchange membrane (PEM) fuel cell, platinum-group-metal (PGM)-based catalysts account for ≈50% of the projected total cost for large-scale production. To lower the cost, two materials-based strategies have been pursued: 1) to decrease PGM catalyst usage (so-called low-PGM catalysts), and 2) to develop alternative PGM-free catalysts. Grand stability challenges exist when PGM catalyst loading is decreased in a membrane electrode assembly (MEA)-the power generation unit of a PEM fuel cell-or when PGM-free catalysts are integrated into an MEA. More importantly, there is a significant knowledge gap between materials innovation and device integration. For example, high-performance electrocatalysts usually demonstrate undesired quick degradation in MEAs. This issue significantly limits the development of PEM fuel cells. Herein, recent progress in understanding the degradation of low-PGM and PGM-free catalysts in fuel cell MEAs and materials-based solutions to address these issues are reviewed. The key factors that degrade the MEA performance are highlighted. Innovative, emerging material concepts and development of low-PGM and PGM-free catalysts are discussed.

A framework ensemble facilitates high Pt utilization in a low Pt loading fuel cell

Rationally designing the structure of catalyst layer in MEA to achieve the dispersion of active sites at the cross of three-phase field and the effective transfer network paths for protons through catalysts and catalyst layer.

Strategies to enhance the electrochemical performances of Pt-based intermetallic catalysts

The need for improving the energy conversion efficiency of proton exchange membrane fuel cells (PEMFCs) has motivated the development of advanced electrocatalysts with desirable activity and durability. Pt-Based intermetallic compounds, featuring atomically ordered structures, have long been considered to be very promising alternatives to widely employed Pt and Pt alloy (solid solutions) catalysts. To facilitate the practical application of Pt-based intermetallics in PEMFCs, effective strategies have been developed to further improve their catalytic activity and durability over the last decade. This feature article overviews the recent advances on the strategies for enhancing the electrochemical performances of Pt-based intermetallic catalysts, which include size control, surface engineering, and composition tuning. Thermodynamic and kinetic perspectives on the formation of the intermetallic phases are summarized to better design the synthesis conditions and realize the size control. After this, the size-control approaches (e.g. coating protection, matrix protection) are illustrated and discussed. We highlight the positive effect of surface engineering and discuss the recently developed methods for surface engineering. Finally, we discuss the thermodynamic feasibility of composition tuning and recent work based on composition-tunable intermetallic electrocatalysts.

C2 Alcohol Oxidation Boosted by Trimetallic PtPbBi Hexagonal Nanoplates

The exploration of ternary Pt-based catalysts represents a new trend for the application of electrocatalysts in fuel cells. In the present study, intermetallic PtPbBi hexagonal nanoplates (HNPs) with a hexagonal close-packed structure have been successfully synthesized via a facile solvothermal synthesis approach. The optimized PtPbBi HNPs exhibited excellent mass activity in the ethanol oxidation reaction (8870 mA mg^-1_Pt) in an alkaline ethanol solution, which is 12.7 times higher than that of JM Pt/C. Meanwhile, the mass activity of PtPbBi HNPs in an ethylene glycol solution (10,225 mA mg^-1_Pt) is 1.85 times higher than that of JM Pt/C. In particular, its catalytic activity is better than that of most reported Pt-based catalysts. In addition, the optimized PtPbBi HNPs also show a better operational durability than commercial Pt/C. For the ethylene glycol oxidation reaction, a mass activity of 42.7% was retained even after a chronoamperometric test for 3600 s, which is rare among the reported Pt-based catalysts. By combining X-ray photoelectron spectroscopy and electrochemical characterization, we reveal the electron transfer between Pt, Pb, and Bi; this would lead to weakened CO adsorption and enhanced OH adsorption, thereby promoting the removal of toxic intermediates and ensuring that PtPbBi HNP samples have high activity and excellent stability. This work can inspire the design and synthesis of Pt-based nanocatalysts.

Intermetallic PtCu Nanoframes as Efficient Oxygen Reduction Electrocatalysts

Nanoframe alloy structures represent a class of high-performance catalysts for the oxygen reduction reaction (ORR), owing to their high active surface area, efficient molecular accessibility, and nanoconfinement effect. However, structural and chemical instabilities of nanoframes remain an important challenge. Here, we report the synthesis of PtCu nanoframes constructed with an atomically ordered intermetallic structure (O-PtCuNF/C) showing high ORR activity, durability, and chemical stability. We rationally designed the O-PtCuNF/C catalyst by combining theoretical composition predictions with a silica-coating-mediated synthesis. The O-PtCuNF/C combines intensified strain and ligand effects from the intermetallic PtCu L1₁ structure and advantages of the nanoframes, resulting in superior ORR activity to disordered alloy PtCu nanoframes (D-PtCuNF/C) and commercial Pt/C catalysts. Importantly, the O-PtCuNF/C showed the highest ORR mass activity among PtCu-based catalysts. Furthermore, the O-PtCuNF/C exhibited higher ORR durability and far less etching of constituent atoms than D-PtCuNF/C and Pt/C, attesting to the chemically stable nature of the intermetallic structure.

Random alloy and intermetallic nanocatalysts in fuel cell reactions

Fuel cells that use small organic molecules or hydrogen as the anode fuel can power clean electric vehicles. From an experimental perspective, the possible fuel cells' electrocatalytic reaction mechanisms are obtained through in situ electrochemical spectroscopy techniques and density functional theory calculations, providing theoretical guidance for further development of novel nanocatalysts. As advanced nanocatalysts for fuel cells' electrochemical reactions, alloy nanomaterials have greatly improved electrocatalytic activity and stability and have attracted widespread attention. Enhanced electrocatalytic performance of alloy nanocatalysts could be closely related to the synergistic effects, such as electronic and strain effects. Depending on the arrangement of atoms, alloys can be classified into random alloy and intermetallic compounds (ordered structure). Intermetallic compounds generally have lower heats of formation and stronger heteroatomic bonding strength relative to the random alloy, resulting in high chemical and structural stability in either full pH solutions or electrochemical tests. Here, we summarize the latest advances and the structure-function relationship of noble metal alloy nanocatalysts, among which Pt-based catalysts are the main ones, as well as comprehensively understand why they significantly affect the electrocatalytic performance of fuel cells. Novel alloy nanocatalysts with a robust three-phase interface to achieve efficient charge and mass transfer can obtain desirable activity and stability in the electrochemical workstation tests, and is expected to acquire a higher power density on fuel cell test systems with harsh test conditions.

Bromide Ions Triggered Synthesis of Noble Metal-Based Intermetallic Nanocrystals

Ordered intermetallic nanomaterials with a well-defined crystal structure and fixed stoichiometry facilitate the predictable control of their electronic structure and catalytic performance. To obtain the thermodynamically stable intermetallic structures, the conventional approaches with high-temperature annealing are still far from satisfactory, because of annealing-induced aggregation and sintering of nanomaterials. Herein, a general wet-chemical method is developed to synthesize a series of noble metal-based intermetallic nanocrystals, including hexagonal close-packed (hcp) PtBi nanoplates, face-centered cubic (fcc) Pd₃ Pb nanocubes, and hcp Pd_2.5 Bi_1.5 nanoparticles. During the synthetic process, Br^- ions play two important roles for the formation of ordered intermetallic structures: i) Br^- ions can coordinate with the metal ions to decrease their reduction potentials thus slowing down the reduction kinetics. ii) Br^- ions can combine with molecular oxygen to generate an oxidative etching effect, hence reconstructing the atom arrangement, which is beneficial for the formation of the intermetallic structure. As a proof-of-concept application, Pd₃ Pb nanocubes are used as electrocatalysts for ethanol and methanol oxidation reactions, which exhibit significantly improved electrochemical performance compared with the commercial Pd black catalyst.

The impact of synthetic method on the catalytic application of intermetallic nanoparticles

Intermetallic alloy nanocrystals have emerged as a promising next generation of nanocatalyst, largely due to their promise of surface tunability. Atomic control of the geometric and electronic structure of the nanoparticle surface offers a precise command of the catalytic surface, with the potential for creating homogeneous active sites that extend over the entire nanoparticle. Realizing this promise, however, has been limited by synthetic difficulties, imparted by differences in parent metal crystal structure, reduction potential, and atomic size. Further, little attention has been paid to the impact of synthetic method on catalytic application. In this review, we seek to connect the two, organizing the current synthesis methods and catalytic scope of intermetallic nanoparticles and suggesting areas where more work is needed. Such analysis should help to guide future intermetallic nanoparticle development, with the ultimate goal of generating precisely controlled nanocatalysts tailored to catalysis.

High-efficiency methanol oxidation electrocatalysts realized by ultrathin PtRuM-O (M = Ni, Fe, Co) nanosheets

A general method for controlling the synthesis of a class of ultrathin PtRuM-O (M = Ni, Fe, Co) NSs is reported for the first time. By optimizing the metal ratio, the Pt₇RuNi₂-O NS catalyst is found to have the highest electrocatalytic activity (mass activity, 3.57 A mg_Pt^-1) for the MOR among PtRuM-O NSs and PtRu-O NSs, which is 10.5 times higher than that of commercial Pt/C (0.34 A mg_Pt^-1). And the Pt₇RuNi₂-O NSs also have better stability and CO anti-poisoning properties in the prepared materials. In addition, the ultrathin Pt₇RuNi₂-O NS catalyst also shows the highest performance among reported Pt-based catalysts for the MOR in acidic medium.

High-Loading Pt-Co/C Catalyst with Enhanced Durability toward the Oxygen Reduction Reaction through Surface Au Modification

Carbon-supported Pt-Co (Pt-Co/C) nanoparticles with a high Pt loading are regarded as promising cathode catalysts for practical applications of proton exchange membrane fuel cells (PEMFCs). Unfortunately, with high loading, it is difficult to improve the catalytic durability while maintaining the particle size between 2 and 5 nm to ensure the initial catalytic activity. Thus, it is of great significance to prepare high-loading Pt-Co/C catalysts with enhanced activity and durability. Herein, we proposed an efficient way to prepare high-Pt-loading (>50 wt %) Pt-Co/C catalysts without using any further surfactants. Furthermore, due to the one-step selective acid etching and surface Au modification, the as-prepared catalysts only need to undergo thermal treatment at as low as 150 °C to achieve a surface structure rich of Pt and Au. The average particle size of the as-prepared Au-Pt-Co/C-0.015 is 3.42 nm, and the Pt loading of it is up to 50.2 wt %. The atomic ratio of Pt, Co, and Au is 94:5:1. The mass activity (MA) is nearly 1.9 times that of Pt/C (60 wt %, JM) and the specific activity is also improved. The MA loss after the 30,000-cycle accelerated degradation test (ADT) is only 9.4%. The remarkable durability is mainly due to the surface Au modification, which can restrict the dissolution of Pt and Co. This research provides an effective synthesis strategy to prepare high-loading carbon-supported Pt-based catalysts beneficial to practical PEMFC applications.

High-Index-Facet Metal-Alloy Nanoparticles as Fuel Cell Electrocatalysts

A method to introduce high-index facets into colloidally synthesized nanoparticles is used to produce compositionally uniform Pt-M (M = Ni, Co, and Cu) and Rh-M (M = Ni and Co) tetrahexahedral nanoparticles. The realization of this method allows for a systematic study of catalyst activity as a function of particle composition for various electrooxidation reactions of liquid fuels (formic acid, methanol, and ethanol). The individual contributions of their high-index facets, internal alloying of transition metals, and surface Bi modification to their electrocatalytic properties are experimentally explored, resulting in three key findings. First, the presence of high-index facets is favorable for improving the catalytic activity for all three classes of reactions studied. Second, the effect of transition metal alloying on catalytic activity differs from reaction to reaction. For methanol electrooxidation in an acid electrolyte, due to the contribution from surface Bi modification being negligible, transition metal alloying can significantly the improve overall catalytic efficiency. However, for the other studied reactions, where the surface Bi is highly favorable for improving catalytic activity, there is little influence from transition metal alloying. Finally, multimetallic tetrahexahedral particles have improved stabilities during prolonged operation compared to their monometallic counterparts due to the presence of the alloyed transition metal atoms.

Synergism of Multicomponent Catalysis: One-Dimensional Pt-Rh-Pd Nanochain Catalysts for Efficient Methanol Oxidation

Designing Pt-based alloy catalysts with multicomponent composition and a controllable structure is important to improve the utilization efficiency of precious metals and catalytic activity, but it still face a lot of challenges for simple preparation. Herein, we used insulin amyloid fibrils as templates and their own one-dimensional spiral structure to synthesize Pt-Rh-Pd ternary alloy nanochains under mild conditions. The prepared Pt-Rh-Pd alloy nanochains (NCs) have uniform diameter, and the particle size is only 2 nm. This ultrafine structure increases the specific surface area of the catalyst to a certain extent, and the synergistic effect of the three metals improves the catalytic performance. Compared with commercial Pt/C and binary Pt-Rh NCs, the as-presented Pt-Rh-Pd NCs show better methanol oxidation activity ability and stability against CO poisoning. The peak current density of front sweep is 1.48 mA cm-2, which is 1.7 times higher than that of commercial Pt/C (0.89 mA cm-2) and 1.4 times higher than that of the Pt-Rh NCs (1.07 mA cm-2), indicating great application potential as high-performance electrocatalysts in fuel cells.

Unexpectedly high stability and surface reconstruction of PdAuAg nanoparticles for formate oxidation electrocatalysis

High-performance Pd-based nanocatalysts for alkaline methanol and formate fuel cells have stimulated widespread attention. Hence, a series of ternary Pd-Au-Ag nanoalloys have been synthesized on carbon nanotubes, which demonstrate promising activity and unexpectedly high stability for the formate oxidation reaction (FOR) in alkaline medium. The ternary Pd3Au3Ag1 nanoalloy catalyst showed an initial mass activity of 4.51 A mgPd-1 and a retained mass activity of 1.32 A mgPd-1 after chronoamperometric measurement for 3600 s, which are superior to the best values for all FOR catalysts reported so far. The Pd3Au3Ag1 catalyst also showed a good specific activity of 4.32 mA cm-2 for the methanol oxidation reaction. Furthermore, surface reconstruction of the Pd3Au3Ag1 nanoalloy was observed during FOR, where the activity of Pd3Au3Ag1 catalysts increased up to 33% and the cycling durability retained 55% after cyclic voltammetry with the upper potential of 1.7 V. The FOR enhancement is attributed to the formation of mixed oxidation-state Ag sites and the increase in the Pd surface coverage, and provides a new prospect for the design of ternary nanoalloy electrocatalysts for various fuel oxidation reactions.

Structure-Sensitive Electrocatalytic Reduction of CO2 to Methanol over Carbon-Supported Intermetallic PtZn Nano-Alloys

The electrochemical reduction of CO₂ (CO₂RR) to produce valuable synthetic fuel like CH₃OH not only mitigates the accumulated greenhouse gas from the environment but is also a promising direction toward attenuating our continuous reliance on fossil fuels. However, CO₂RR to yield CH₃OH suffers because of large overpotential, competitive H₂ evolution reaction (HER), and poor product selectivity. In this regard, intermetallic alloy catalysts open up a wide possibility of fine-tuning the electronic property and attain appropriate structures that facilitate selective CO₂RR. Here, we report for the first time the CO₂RR over carbon-supported PtZn nano-alloys and probed the crucial role of structures and interfaces as active sites. PtZn/C, Pt₃Zn/C, and Pt_xZn/C (1 < x < 3) synthesized from the metal-organic framework material were characterized structurally and morphologically. The catalysts demonstrated structure dependency toward CH₃OH selectivity, as the mixed-phase Pt_xZn/C outperformed the phase-pure PtZn/C and Pt₃Zn/C. The structure-dependent reaction mechanism and the kinetics were elucidated over the synthesized catalysts with the help of detail experiments and associated density functional theory calculations. Results showed that in spite of low electrochemically active surface area, Pt_xZn could not only have facilitated the single electron transfer to adsorbed CO₂ but also showed better binding of the intermediate CO₂^•- over its surface. Moreover, the lower bond energy between the mixed-phase surface and -OCH₃ compared to the phase-pure catalysts has enabled higher CH₃OH selectivity over Pt_xZn. This work opens a wide possibility of studying the role of interfaces between phase-pure nano-alloys toward CO₂RR.

Synthesis of Pd-Pt Ultrathin Assembled Nanosheets as Highly Efficient Electrocatalysts for Ethanol Oxidation

Control over composition and morphology of nanocrystals (NCs) is significant to develop advanced catalysts applicable to polymer electrolyte membrane fuel cells and further overcome the performance limitations. Here, we present a facile synthesis of Pd-Pt alloy ultrathin assembled nanosheets (UANs) by regulating the growth behavior of Pd-Pt nanostructures. Iodide ions supplied from KI play as capping agents for the {111} plane to promote 2-dimensional (2D) growth of Pd and Pt, and the optimal concentrations of cetyltrimethylammonium chloride and ascorbic acid result in the generation of Pd-Pt alloy UANs in high yield. The prepared Pd-Pt alloy UANs exhibited the remarkable enhancement of the catalytic activity and stability toward ethanol oxidation reaction compared to irregular-shaped Pd-Pt alloy NCs, commercial Pd/C, and commercial Pt/C. Our results confirm that the Pd-Pt alloy composition and ultrathin 2D morphology offer high accessible active sites and favorable electronic structure for enhancing electrocatalytic activity.

Unusual Effect of Trace Water on the Structure and Activity of Nix Co1-x Electrocatalysts for the Methanol Oxidation Reaction

Highly active Ni-based catalysts have attracted much attention but are still facing challenges owing to the immature synthetic method. Herein, polyhedral Ni_x Co_1-x alloy was prepared by a facile modified polyol method in which a trace amount of water could halve the particle size of the alloy. The Ni/Co ratios in Ni_x Co_1-x alloy strictly depended on the used amount of water owing to the different solubilities of the precursors. Among them, the Ni_0.6 Co_0.4 nanoparticles obtained with 70 μL of deionized water exhibited the best performance in the methanol oxidation reaction with a peak current density of 116 mA cm^-2 in the presence of 1 m NaOH+0.5 m CH₃ OH solution, which is higher than those of Ni_0.7 Co_0.3 (80 mA cm^-2 ) and Ni_0.5 Co_0.5 (33 mA cm^-2 ). The excellent performance of Ni_0.6 Co_0.4 is attributed to the unique structure with appropriate Ni/Co ratio, which elongates the C-O bond in methanol and lowers the reaction free energy according to DFT calculations.

Encapsulating Pt Nanoparticles inside a Derived Two-Dimensional Metal-Organic Frameworks for the Enhancement of Catalytic Activity

The development of highly active and stable electrocatalysts toward oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) is a key for commercial application of fuel cells and water splitting. Here, we report a highly active and stable Pt nanoparticles (NPs) encapsulated in ultrathin two-dimensional (2D) carbon layers derived from the ultrathin 2D metal-organic framework precursor (ZIF-67). Electrochemical tests reveal that our approach not only stabilized Pt NPs successfully but also boosted Pt activities toward ORR and HER. We found that our Pt catalysts encapsulated in ultrathin 2D carbon layers exhibited an ORR activity of 5.9 and 12 times greater than those of the commercial Pt/C and Pt/RGO without 2D carbon layer protection. Our encapsulated Pt catalysts also show more than nine times higher stability than those of Pt/C catalysts. In addition to ORR, our novel encapsulated Pt catalysts display an extraordinary stability and activity toward HER, with a lower overpotential (14.3 mV in acidic media and 37.2 mV in alkaline media) at a current density of 10 mA cm^-2 than Pt/C catalysts (23.1 mV in acidic media and 92.1 mV in alkaline media). The enhanced electrochemical activities and stability of our encapsulated Pt catalysts are attributed to the synergistic effect of Pt-based NPs and ultrathin 2D carbon layers derived from ZIF-67 with enriched active sites Co-N_x. First-principles simulations reveal that the synergistic catalysis of Pt-based NPs and Co-N_x derived from ZIF-67 improves the activity for ORR and HER.

Pt2+-Exchanged ZIF-8 nanocube as a solid-state precursor for L10-PtZn intermetallic nanoparticles embedded in a hollow carbon nanocage

Nanoparticles with an atomically ordered alloy phase have received enormous attention for application as catalysts in fuel cells because of their unique electronic properties resulting from unusually strong d-orbital interactions between two metal components. However, the synthesis of intermetallic nanoparticles requires a high reaction temperature, thus necessitating the protection of nanoparticles with inorganic layers to prevent aggregation of nanoparticles during synthesis. The protective layer needs to be removed later for application as a catalyst, which is a cumbersome process. Herein, a novel synthetic strategy is reported for the preparation of L1₀-PtZn intermetallic nanoparticles by utilizing Pt²⁺-exchanged ZIF-8 nanocubes as a solid-state precursor. The Pt²⁺-exchanged ZIF-8 phase plays a dual role as a metal ion source for L1₀-PtZn nanoparticles and as a carbonaceous matrix that restrains the aggregation of nanoparticles during thermal treatment. The L1₀-PtZn nanoparticles embedded in a hollow carbon nanocage obtained from one-step annealing of Pt²⁺-exchanged ZIF-8 showed better electrocatalytic activity and durability toward methanol oxidation under acidic electrolyte conditions than those obtained from commercial Pt/C catalysts.

Sub-3 nm Intermetallic Ordered Pt3In Clusters for Oxygen Reduction Reaction

Industrial applications of Pt-based oxygen-reduction-reaction (ORR) catalysts are limited by high cost and low stability. Here, facile large-scale synthesis of sub-3-nm ordered Pt3In clusters on commercial carbon black as ORR catalyst that alleviates both these shortcomings is reported. As-prepared Pt3In/C exhibits a mass activity of 0.71 mA mg-1 and a specific area activity of 0.91 mA cm-2 at 0.9 V vs reversible hydrogen electrode, which are 4.1 and 2.7 times the corresponding values of commercial Pt/C catalysts. The as-prepared ordered Pt3In/C catalyst is also remarkably stable with negligible activity and structural decay after 20 000 accelerated electrochemical durability cycles, due to its ordered structure. Density-functional-theory calculations demonstrate that ordered-Pt3In is more energetically favorable for ORR than the commercial Pt/C catalysts because ∆G O is closer to the peak of the volcano plot after ordered incorporation of indium atoms.

Pore structure dependent activity and durability of mesoporous rhodium nanoparticles towards the methanol oxidation reaction

A significant porous structure effect of mesoporous rhodium nanoparticles on the electrocatalytic methanol oxidation reaction was reported.