Size Stability and H2/CO Selectivity for Au Nanoparticles during Electrocatalytic CO2 Reduction

A Polymer Solution To Prevent Nanoclustering and Improve the Selectivity of Metal Nanoparticles for Electrocatalytic CO2 Reduction

The stability of metal nanocatalysts for electrocatalytic CO₂ reduction is of key importance for practical application. We report the use of two polymeric N-heterocyclic carbenes (NHC) (polydentate and monodentate) to stabilize metal nanocatalysts (Au and Pd) for efficient CO₂ electroreduction. Compared with other conventional ligands including thiols and amines, metal-carbene bonds that are stable under reductive potentials prevent the nanoclustering of nanoparticles. Au nanocatalysts modified by polymeric NHC ligands show an activity retention of 86 % after CO₂ reduction at -0.9 V for 11 h, while it is less than 10 % for unmodified Au. We demonstrate that the hydrophobicity of polymer ligands and the enriched surface electron density of metal NPs through σ-donation of NHCs substantially improve the selectivity for CO₂ reduction over proton.

Porous Palladium Nanomeshes with Enhanced Electrochemical CO2 -into-Syngas Conversion over a Wider Applied Potential

Electrochemical conversion of CO₂ into syngas, which can be used directly in the classical petroleum industrial processes, provides a powerful approach for achieving the recycling of anthropogenic carbon. Pd has previously been reported to be capable of converting CO₂ into syngas with various CO/H₂ ratios, but only at limited applied potential, which is mainly attributed to fewer active sites exposed toward electrocatalysis. Herein, high-performance Pd nanomeshes (NMs) assembled with branch-like Pd nanoparticles were designed and synthesized by using a simple interface-induced self-assembly strategy; these NMs could catalyze CO₂ -into-syngas conversion with a high current density in a wide applied potential range from -0.5 to -1.0 V (vs. reversible hydrogen electrode). Further evidence validated that the enhanced activity of the Pd NMs was not only caused by the crosslinked network structure accelerating electron transport, but also by the greater number of edge and/or corner active sites exposed on the surface of the NMs, which facilitated CO₂ adsorption, CO₂ ^.- formation, COOH* stabilization, and CO generation. Under optimal operating conditions, Pd NMs could balance two competing reactions: CO₂ reduction and hydrogen evolution. The resultant syngases with the ideal and tunable CO/H₂ ratio between 0.5:1 and 1:1 could be used directly for methanol synthesis and Fischer-Tropsch reactions.

Extracting structural information of Au colloids at ultra-dilute concentrations: identification of growth during nanoparticle immobilization

Sol-immobilization is increasingly used to achieve supported metal nanoparticles (NPs) with controllable size and shape; it affords a high degree of control of the metal particle size and yields a narrow particle size distribution. Using state-of-the-art beamlines, we demonstrate how X-ray absorption fine structure (XAFS) techniques are now able to provide accurate structural information on nano-sized colloidal Au solutions at μM concentrations. This study demonstrates: (i) the size of Au colloids can be accurately tuned by adjusting the temperature of reduction, (ii) Au concentration, from 50 μM to 1000 μM, has little influence on the average size of colloidal Au NPs in solution and (iii) the immobilization step is responsible for significant growth in Au particle size, which is further exacerbated at increased Au concentrations. The work presented demonstrates that an increased understanding of the primary steps in sol-immobilization allows improved optimization of materials for catalytic applications.

Enhancing CO2 Electroreduction with Au/Pyridine/Carbon Nanotubes Hybrid Structures

Selective electrochemical reduction of CO₂ by using renewable electricity has received considerable attention because of the potential to convert a harmful greenhouse gas into useful chemicals. A high-performance electrocatalyst for CO₂ reduction is constructed based on metal nanoparticles/organic molecule hybrid materials. On the nanoscale, Au nanoparticles are uniformly anchored on carbon nanotubes to afford substantially increased current density, improved selectivity for CO, and enhanced stability. On the molecular level, the catalytic performance is further enhanced by introducing axial pyridine groups to the surface of the carbon nanotubes. The resulting hybrid catalyst exhibits around 93 % faradaic efficiency for CO production over a wide potential range (-0.58 to -0.98 V), a high mass activity of 251 A g_Au ^-1 at -0.98 V in aqueous solution at near-neutral pH, and strong stability with continuous electrolysis for 10 h at -0.58 V. DFT calculations indicate that the synergistic effects of Au and axial pyridine could dramatically stabilize the key intermediate (*COOH) formed in the rate-limiting step of CO₂ reduction, which effectively lowers the overpotential.

Powerful CO2 electroreduction performance with N–carbon doped with single Ni atoms

A single-atom dispersed Ni doping strategy to boost the performance of N–C materials for CO₂RR by the pyrolysis of a metal–organic molecule complex was reported and revealed.

Recent Advances in Electrochemical CO2 -to-CO Conversion on Heterogeneous Catalysts

Electrochemical reduction of carbon dioxide (CO₂ ) to fuels and chemicals provides a promising solution for renewable energy storage and utilization. Among the many possible reaction pathways, CO₂ conversion to carbon monoxide (CO) is the first step in the synthesis of more complex carbon-based fuels and feedstocks, and holds great significance for the chemical industry. Herein, recent advances in heterogeneous catalysts for selective CO evolution from electrochemical reduction of CO₂ are described. With Au catalysts as a paradigm, principles for catalyst design including size, morphology, and grain boundary densities tuning, surface modifications, as well as metal-support interaction are comprehensively summarized, which shed light on the development of other transition metal catalysts targeting efficient CO₂ -to-CO conversion. In addition, recently emerged novel materials including transition metal single-atom catalysts, which present significantly different catalytic behaviors compared to their bulk counterparts and thus open up many unexpected opportunities, are summarized. Furthermore, the technical aspects with respect to large-scale production of CO are presented, focusing on the full-cell design and implementation. Finally, short comments related to the future direction of real-word CO₂ electrolysis for CO supply are provided in terms of catalyst optimization and technical breakthrough.

Ultrasmall Au nanocatalysts supported on nitrided carbon for electrocatalytic CO2 reduction: the role of the carbon support in high selectivity

Au is one of the most promising electrocatalysts to convert CO2 into CO in an aqueous-phase electrochemical reduction. However, ultrasmall Au nanocatalysts (AuNCs, <2 nm) have proven to be favorable for water reduction over CO2, although they possess a large surface-to-volume ratio and potentially are ideal for CO2 reduction. We herein report that ultrasmall AuNCs (1.9 ± 0.3 nm) supported on nitrided carbon are remarkably active and selective for CO2 reduction. The mass activity for CO of AuNCs reaches 967 A g-1 with a faradaic efficiency for CO of ∼83% at -0.73 V (vs. reversible hydrogen electrode) that is an order of magnitude more active than the state-of-the-art results. The high activity is endowed by the large surface area per unit weight and the high selectivity of ultrasmall AuNCs for CO2 reduction originates from the cooperative effect of Au and the nitrided carbon support where the surface N sites act as Lewis bases to increase the surface charge density of AuNCs and enhance the localized concentration of CO2 nearby catalytically active Au sites. We show that our results can be applied to other pre-synthesized Au catalysts to largely improve their selectivity for CO2 reduction by 50%. Our method is expected to illustrate a general guideline to effectively lower the cost of Au catalysts per unit weight of the product while maintaining its high selectivity for CO2 reduction.

Open-air spray plasma deposited UV-absorbing nanocomposite coatings

We demonstrate the deposition of mechanically robust UV-absorbing nanocomposite coatings with a newly developed dual-source deposition method involving ultrasonic spraying and open-air plasma deposition. Nanoparticles and the coating matrix are independently deposited which eliminates difficulties associated with preparing composites with high mass fraction of well-dispersed nanoparticles in the matrix. Nanocomposite coatings containing different concentrations of silica, ceria, and both titania and ceria nanoparticles were successfully deposited with good nanoparticle dispersity, high transparency over the visible range, effective absorption in the UV wavelength, and enhanced mechanical properties. Moreover, films were successfully deposited on several substrates including polycarbonate to demonstrate the low processing temperature of this dual-source deposition method. Coatings with different nanoparticle concentrations and film thicknesses were systematically studied in terms of their surface morphology, optical properties and mechanical properties. Accelerated photostability testing of the UV-absorbing nanocomposites demonstrates significantly enhanced performance compared to existing coatings with either a polymeric matrix or organic UV-absorbers.

Elucidating the active sites for CO2 electroreduction on ligand-protected Au25 nanoclusters

This work reveals the mechanism of CO₂ electrochemical reduction on ligand-protected Au nanoclusters and catalytic sites responsible for increased selectivity towards CO.