Hydroxide Ligands Cooperate with Catalytic Centers in Metal–Organic Frameworks for Efficient Photocatalytic CO2 Reduction

Utilization of Low-Concentration CO2 with Molecular Catalysts Assisted by CO2-Capturing Ability of Catalysts, Additives, or Reaction Media

Increasing concentration of atmospheric CO₂ is a worldwide concern and continues to trigger various environmental problems. Photo- or electrocatalytic CO₂ reduction (CO₂-Red) using solar energy, i.e., artificial photosynthesis, is a prospective technique owing to its sustainability and the usefulness of the reaction products. Concentrations of CO₂ in exhaust gases from industries are several % to 20%, and that in the atmosphere is about 400 ppm. Although condensation processes of CO₂ require high energy consumption and cost, pure CO₂ has been used in most of the reported studies for photo- and electrocatalytic CO₂-Red because the reaction between CO₂ and the catalyst could be one of the rate-limiting steps. To address these issues and provide a repository of potential techniques for other researchers, this perspective summarizes the catalytic systems reported for the reduction of low-concentration CO₂, which utilize a combination of catalytic CO₂-Red and CO₂-capturing reactions (or CO₂ adsorption). First, we describe CO₂ insertions into M-X bonds of the catalysts, which increase the rate constants and/or equilibrium constants for CO₂ binding on the catalysts, and modifications of the second coordination sphere to stabilize the CO₂-bound catalysts. Furthermore, we discuss the reaction media used for catalytic CO₂-Red that have the unique effect of increasing CO₂ concentrations around the catalysts. These reaction media include typical CO₂-capturing additives, ionic liquids, and metal-organic frameworks.

Copper-Based Metal-Organic Framework with a Tetraphenylethylene-Tetrazole Linker for Visible-Light-Driven CO2 Photoconversion

The design of efficient and inexpensive photocatalysts for CO₂ photoreduction under visible light is of great significance for the sustainable development of the entire society. Herein, a copper-based metal-organic framework (MOF) (CUST-804) using a bulky tetraphenylethylene-tetrazole linker is synthesized and successfully used as a photocatalyst for CO₂ reduction. The structural characterizations, as well as the photophysical properties, are investigated systematically. In the heterogeneous catalytic system, CUST-804 exhibits a robust CO production activity up to 2.71 mmol g^-1 h^-1 with excellent recyclability along with a selectivity of 82.8%, which is comparable with those of the reported copper-based MOF system. Theoretical calculations demonstrated that, among three kinds of coordinated model, only the 5-coordinated Cu site is active for CO₂ reduction, in which the *COOH intermediate is stabilized and CO is readily desorbed. The results obtained herein can provide fresh insights into the realization of efficient copper-functionalized crystalline photocatalysts for CO₂ reduction.

Exchange of coordinated carboxylates with azolates as a route to obtain a microporous zinc-azolate framework

Metal-organic frameworks (MOFs) containing open metal sites are advantageous for wide applications. Here, carboxylate linkers are replaced with triazolate coordination in pre-formed Zn-MOF-74 via solvent-assisted linker exchange (SALE) to prepare the novel NU-250, within the known hexagonal channel-based MAF-X25 series that has not previously been synthesized de novo.

Research Progress in Semiconductor Materials with Application in the Photocatalytic Reduction of CO2

The large-scale burning of non-renewable fossil fuels leads to the gradual increase of the CO2 concentration in the atmosphere, which is associated with negative impacts on the environment. The consequent need to reduce the emission of CO2 resulting from fossil fuel combustion has led to a serious energy crisis. Research reports indicate that the photocatalytic reduction of CO2 is one of the most effective methods to control CO2 pollution. Therefore, the development of novel high-efficiency semiconductor materials has become an important research field. Semiconductor materials need to have a structure with abundant catalytic sites, among other conditions, which is of great significance for the practical application of highly active catalysts for CO2 reduction. This review systematically describes various types of semiconductor materials, as well as adjustments to the physical, chemical and electronic characteristics of semiconductor catalysts to improve the performance of photocatalytic reduction of CO2. The principle of photocatalytic CO2 reduction is also provided in this review. The reaction types and conditions of photocatalytic CO2 reduction are further discussed. We believe that this review will provide a good basis and reference point for future design and development in this field.

Exploring mechanistic routes for light alkane oxidation with an iron-triazolate metal-organic framework

In this work, we computationally explore the formation and subsequent reactivity of various iron-oxo species in the iron-triazolate framework Fe₂(μ-OH)₂(bbta) (H₂bbta = 1H,5H-benzo(1,2-d:4,5-d')bistriazole) for the catalytic activation of strong C-H bonds. With the direct conversion of methane to methanol as the probe reaction of interest, we use density functional theory (DFT) calculations to evaluate multiple mechanistic pathways in the presence of either N₂O or H₂O₂ oxidants. These calculations reveal that a wide range of transition metal-oxo sites - both terminal and bridging - are plausible in this family of metal-organic frameworks, making it a unique platform for comparing the electronic structure and reactivity of different proposed active site motifs. Based on the DFT calculations, we predict that Fe₂(μ-OH)₂(bbta) would exhibit a relatively low barrier for N₂O activation and energetically favorable formation of an [Fe(O)]²⁺ species that is capable of oxidizing C-H bonds. In contrast, the use of H₂O₂ as the oxidant is predicted to yield an assortment of bridging iron-oxo sites that are less reactive. We also find that abstracting oxo ligands can exhibit a complex mixture of both positive and negative spin density, which may have broader implications for relating the degree of radical character to catalytic activity. In general, we consider the coordinatively unsaturated iron sites to be promising for oxidation catalysis, and we provide several recommendations on how to further tune the catalytic properties of this family of metal-triazolate frameworks.

Selective photocatalytic CO2 reduction in aerobic environment by microporous Pd-porphyrin-based polymers coated hollow TiO2

Direct photocatalytic CO2 reduction from primary sources, such as flue gas and air, into fuels, is highly desired, but the thermodynamically favored O2 reduction almost completely impedes this process. Herein, we report on the efficacy of a composite photocatalyst prepared by hyper-crosslinking porphyrin-based polymers on hollow TiO2 surface and subsequent coordinating with Pd(II). Such composite exhibits high resistance against O2 inhibition, leading to 12% conversion yield of CO2 from air after 2-h UV-visible light irradiation. In contrast, the CO2 reduction over Pd/TiO2 without the polymer is severely inhibited by the presence of O2 ( ≥ 0.2 %). This study presents a feasible strategy, building Pd(II) sites into CO2-adsorptive polymers on hollow TiO2 surface, for realizing CO2 reduction with H2O in an aerobic environment by the high CO2/O2 adsorption selectivity of polymers and efficient charge separation for CO2 reduction and H2O oxidation on Pd(II) sites and hollow TiO2, respectively.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Insight into the Photocatalytic Activity of Cobalt-Based Metal–Organic Frameworks and Their Composites

Nowadays, materials with great potential for environmental protection are being sought. Metal–organic frameworks, in particular those with cobalt species as active sites, have drawn considerable interest due to their excellent properties. This review focuses on describing cobalt-based MOFs in the context of light-triggered processes, including dye degradation, water oxidation and splitting, carbon dioxide reduction, in addition to the oxidation of organic compounds. With the use of Co-based MOFs (e.g., ZIF-67, Co-MOF-74) as photocatalysts in these reactions, even over 90% degradation efficiencies of various dyes (e.g., methylene blue) can be achieved. Co-based MOFs also show high TOF/TON values in water splitting processes and CO2-to-CO conversion. Additionally, the majority of alcohols may be converted to aldehydes with efficiencies exceeding 90% and high selectivity. Since Co-based MOFs are effective photocatalysts, they can be applied in the elimination of toxic contaminants that endanger the environment.

Indium sulfide deposited MIL-53(Fe) microrods: Efficient visible-light-driven photocatalytic reduction of hexavalent chromium

The ecosystems and human health were seriously threatened by hexavalent chromium (Cr(VI)) in wastewater. In this article, using the idea of the highly matched energy band structure between indium sulfide (In₂S₃) and MIL-53(Fe), a Type-II heterojunction has been constructed by loading In₂S₃ on MIL-53(Fe) microrod to overcome the fault like high recombination rates of photogenerated electron-holes of In₂S₃. The composite with 20:1 mass ratio of In₂S₃ to MIL-53(Fe) (IM-2) was adopted as an optimal sample for efficient photocatalytic Cr(VI) reduction under visible light. Various characterization techniques were used to verify the characteristics of composites and delved into the structure-effect relationship between this heterojunction and its activity. Results showed that the reaction rate constants of the photoreduction process over IM-2 was ~ 4 and 26 times higher than those of pure In₂S₃ and MIL-53(Fe), respectively, and the catalyst could maintain superior removal efficiency (88.6%) and steady crystal structure after four cycles. First-principles calculations further illustrated that the heterostructure formed between In₂S₃ and MIL-53(Fe) could effectively accelerate the separation of photogenerated electrons and holes, thus improving the photocatalytic reduction performance. Moreover, the active species analyses revealed that the superoxide radicals and electrons were mainly involved in the reduction of Cr(VI).

High–efficiency photoreduction of CO2 in low vacuum

Photoreduction of CO2 into CO, CH4 or hydrocarbons is attractive, due to environmental compatibility and economic feasibility. Optimizing the reaction engineering of CO2 reduction is an effective and general strategy...

Linker Engineering in Metal-Organic Frameworks for Dark Photocatalysis

Dark reactions featuring continuous activity under light off conditions play a critical role in natural photosynthesis. However, most artificial photocatalysts are inactive upon the removal of the light source, and the artificial photocatalysts with dark photocatalysis abilities have been rarely explored. Herein, we report a Ti-based metal–organic framework (MOF), MIL-125, exhibiting the capability of dark photocatalytic hydrogen production. Remarkably, the introduction of different functional groups onto the linkers enables distinctly different activities of the resulting MOFs (MIL-125-X, X = NH₂, NO₂, Br). Dynamic and thermodynamic investigations indicate that the production and lifetime of the Ti³⁺ intermediate are the key factors, due to the electron-donating/-withdrawing effect of the functional groups. As far as we know, this is the first report on dark photocatalysis over MOFs, providing new insights into the storage of irradiation energy and demonstrating their great potential in dark photocatalysis due to the great MOF diversity.

A Ti-based MOF with long-lived Ti³⁺ can achieve dark photocatalysis. The different groups on the organic linker modulate electron storage ability and the lifetime of Ti³⁺, significantly regulating dark photocatalytic activity in H₂ production.

Feeding Carbonylation with CO2 via the Synergy of Single-Site/Nanocluster Catalysts in a Photosensitizing MOF

Solar-driven carbonylation with CO₂ replacing toxic CO as a C1 source is of considerable interest; however it remains a great challenge due to the inert CO₂ molecule. Herein, we integrate cobalt single-site and ultrafine CuPd nanocluster catalysts into a porphyrin-based metal-organic framework to construct composite photocatalysts (Cu₁Pd₂)_z@PCN-222(Co) (z = 1.3, 2.0, and 3.0 nm). Upon visible light irradiation, excited porphyrin can concurrently transfer electrons to Co single sites and CuPd nanoclusters, providing the possibility for coupling CO₂ photoreduction and Suzuki/Sonogashira reactions. This multicomponent synergy in (Cu₁Pd₂)_1.3@PCN-222(Co) can not only replace dangerous CO gas but also dramatically promote the photosynthesis of benzophenone in CO₂ with over 90% yield and 97% selectivity under mild condition. Systematic investigations clearly decipher the function and collaboration among different components in these composite catalysts, highlighting a new insight into developing a sustainable protocol for carbonylation reactions by employing greenhouse gas CO₂ as a C1 source.

Hierarchically Porous Metal-Organic Framework/MoS2 Interface for Selective Photocatalytic Conversion of CO2 with H2 O into CH3 COOH

Metal-organic frameworks (MOFs) provide a platform to design new heterogeneous catalysts for catalytic CO₂ reduction, but selective formation of C2 valuable liquid fuel products remains a challenge. Herein, we propose a strategy to synthesize composites by integrating MoS₂ nanosheets into hierarchically porous defective UiO-66 (d-UiO-66) to form Mo-O-Zr bimetallic sites on the interfaces between UiO-66 and MoS₂ . The active interfaces are favorable for the efficient transfer of photo-generated charge carriers and for promoting the activity, whereas, the synergy of the components at the interfaces achieves selectivity for C2 production. The d-UiO-66/MoS₂ composite facilitates the photo-catalytic conversion of gas phase CO₂ and H₂ O to CH₃ COOH under visible light irradiation without any other adducts. The evolution rate and selectivity of CH₃ COOH reached 39.0 μmol g^-1  h^-1 and 94 %, respectively, without any C1 products, suggesting a new approach for the design of highly efficient photocatalysts of CO₂ for C2 production. Theoretical calculations demonstrate the charge-polarized Zr-O-Mo aided the C-C coupling process with the largely reduced energy barrier.

Influence of the primary and secondary coordination spheres on nitric oxide adsorption and reactivity in cobalt(ii)-triazolate frameworks

Nitric oxide (NO) is an important signaling molecule in biological systems, and as such, the ability of porous materials to reversibly adsorb NO is of interest for potential medical applications. Although certain metal-organic frameworks are known to bind NO reversibly at coordinatively unsaturated metal sites, the influence of the metal coordination environment on NO adsorption has not been studied in detail. Here, we examine NO adsorption in the frameworks Co2Cl2(bbta) (H2bbta = 1H,5H-benzo(1,2-d:4,5-d')bistriazole) and Co2(OH)2(bbta) using gas adsorption, infrared spectroscopy, powder X-ray diffraction, and magnetometry. At room temperature, NO adsorbs reversibly in Co2Cl2(bbta) without electron transfer, with low temperature data supporting spin-crossover of the NO-bound cobalt(ii) centers of the material. In contrast, adsorption of low pressures of NO in Co2(OH)2(bbta) is accompanied by charge transfer from the cobalt(ii) centers to form a cobalt(iii)-NO- adduct, as supported by diffraction and infrared spectroscopy data. At higher pressures of NO, characterization data indicate additional uptake of the gas and disproportionation of the bound NO to form a cobalt(iii)-nitro (NO2 -) species and N2O gas, a transformation that appears to be facilitated by secondary sphere hydrogen bonding interactions between the bound NO2 - and framework hydroxo groups. These results provide a rare example of reductive NO binding in a cobalt-based metal-organic framework, and they demonstrate that NO uptake can be tuned by changing the primary and secondary coordination environment of the framework metal centers.

Effect of Micropores of a Porous Coordination Polymer on the Product Selectivity in RuII Complex-catalyzed CO2 Reduction

To develop an efficient CO2 reduction catalyst, hybridizing a molecular catalyst and a porous coordination polymer (PCP) is a promising strategy because it can combine both advantages of the precise reactivity control of the former and the CO2 adsorption property of the latter. Although several PCP hybrid catalysts have been reported to date, the CO2 sorption behavior and the CO2 reduction reactivity have been investigated separately, and the CO2 enrichment during the catalysis is still unclear. We report CO2 photoreduction under different temperatures and pressures using a PCP-RuII complex hybrid catalyst. The product selectivity (CO or HCOOH) varied depending on the reaction conditions. The altered selectivity could be interpreted in terms of the CO2 capture in the micropores of a PCP.

Incorporation of Chromophores into Metal-Organic Frameworks for Boosting CO2 Conversion

The exploitation of highly stable and active catalysts for the conversion of CO₂ into valuable fuels is desirable but is a great challenge. Herein, we report that the incorporation of chromophores into metal-organic frameworks (MOFs) could afford robust catalysts for efficient CO₂ conversion. Specifically, a porous Nd(III) MOF (Nd-TTCA; TTCA^3- = triphenylene-2,6,10-tricarboxylate) was constructed by incorporating one-dimensional Nd(CO₂)_n chains and TTCA^3- ligands, which exhibits a very high stability, retaining its framework not only in the air at 300 °C for 2 h but also in boiling aqueous solutions at pH 1-12 for 7 days. More importantly, Nd-TTCA has achieved a 5-fold improvement in photocatalytic activity for reducing CO₂ to HCOOH and a 10-fold improvement in catalytic activity for the cycloaddition of CO₂ into cyclic carbonate in comparison to those of H₃TTCA itself. This work gives a new strategy to design efficient artificial crystalline catalysts for CO₂ conversion.

Metal-organic frameworks of linear trinuclear cluster secondary building units: structures and applications

Secondary building units (SBUs) in metal-organic frameworks (MOFs) are essential from both a structural and performance perspective. While a variety of SBUs, such as paddlewheel CuII2, triangular CrIII3, tetrahedral ZnII4, and octahedral ZrIV6 have been extensively studied, the linear trinuclear SBUs (herein denoted as M₃), though frequently encountered, are rarely discussed as a class. A literature survey reveals that M₃ clusters are ubiquitous in discrete molecular entities as well as in MOFs. Unlike most other cluster types, however, they have an unprecedented metal diversity and ligand tolerance. The single-crystals of some M₃-based MOFs are also sufficiently robust upon guest removal and exchange or multi-step post-modifications to enable catalytic mechanism elucidation. Some of these M₃-based SBUs endow MOFs with stability under demanding conditions necessary, for example, in flue gas separation. Herein we review MOFs sustained by this common but under-appreciated class of SBUs and discuss applications of the resulting MOF motifs.

High loading of Mn(ii)-metalated porphyrin in a MOF for photocatalytic CO2 reduction in gas-solid conditions

A high loading of Mn(ii)-metalated porphyrin was achievable in a 2D porphyrin-based Mn-MOF induced by an ionic liquid. The excellent stability, sufficient redox potential, atomically dispersed porphyrin Mn(ii) sites, desired CO₂ affinity, high visible light-harvesting and efficient charge separation, endow this MOF with the overall photocatalytic conversion of CO₂ to CH₄ in gas-solid conditions.

Efficient Photocatalytic Reduction of CO2 to CO Using NiFe2O4@N/C/SnO2 Derived from FeNi Metal-Organic Framework

Use of light is considered an effective approach to convert CO₂ into usable chemical energy. In the present study, an iron- and nickel-containing bimetallic metal-organic framework (MOF) was synthesized via a simple solvothermal route. SnO₂ was then composited with the said MOF, and the obtained material was calcined and annealed to fabricate a series of nanophotocatalysts. The annealed sample displayed superior photocatalytic activity to the calcined sample, possibly due to the carbon-nitrogen layer formed after annealing mediating the charge-transfer process. The results of photocatalytic experiments indicated that using [Ru(bpy)₃]Cl₂·6H₂O as a photosensitizer and triethanolamine (TEOA) and acetonitrile (MeCN) as sacrificial agents, the catalyst sample was annealed at 450 °C (NiFe₂O₄@N/C/SnO₂-450) to afford the highest CO yield from CO₂ (2057.41 μmol g^-1 h^-1). The increase in the photocatalytic ability of the nanocomposites is basically attributed to multiple synergistic effects between NiFe₂O₄ and SnO₂, which reduce the recombination probability of the photo-induced electrons and holes. Ultimately, a photocatalytic reaction mechanism is proposed for NiFe₂O₄@N/C/SnO₂ in the reduction of CO₂.

Highly Dispersive Ni@C and Co@C Nanoparticles Derived from Metal-Organic Monolayers for Enhanced Photocatalytic CO2 Reduction

The metal/carbon composites prepared by direct pyrolysis of metal-organic frameworks (MOFs) are regarded as ideal catalysts. However, conventional MOFs show a three-dimensional bulk structure. For bulk MOF-derived catalysts, most active metal sites are confined in the interior and not fully utilized. In this work, metal-organic monolayers (MOLs) are used as the starting precursors to prepare carbon-wrapped metal nanoparticles, which are further employed as catalysts for photocatalytic CO₂ reduction. The as-prepared Ni-MOLs and Co-MOLs have an ultrathin thickness of ∼1 nm. It is interestingly found that their derived Ni@C and Co@C nanoparticles are highly dispersive and connected with each other like a piece of paper. As compared with bulk MOF-derived counterparts, MOL-derived catalysts increase the accessibility of active metal sites, which can accelerate electron transfer from photosensitizers to Ni@C and Co@C nanoparticles. In this way, the catalytic activity can be greatly improved. Besides, the magnetic nature of Ni@C and Co@C nanoparticles enables the easy separation and recycling of catalysts. It is expected that this work will provide instructive guidelines for the rational design of MOL-derived catalysts.

Construction of C-C bonds via photoreductive coupling of ketones and aldehydes in the metal-organic-framework MFM-300(Cr)

Construction of C-C bonds via reductive coupling of aldehydes and ketones is hindered by the highly negative reduction potential of these carbonyl substrates, particularly ketones, and this renders the formation of ketyl radicals extremely endergonic. Here, we report the efficient activation of carbonyl compounds by the formation of specific host-guest interactions in a hydroxyl-decorated porous photocatalyst. MFM-300(Cr) exhibits a band gap of 1.75 eV and shows excellent catalytic activity and stability towards the photoreductive coupling of 30 different aldehydes and ketones to the corresponding 1,2-diols at room temperature. Synchrotron X-ray diffraction and electron paramagnetic resonance spectroscopy confirm the generation of ketyl radicals via confinement within MFM-300(Cr). This protocol removes simultaneously the need for a precious metal-based photocatalyst or for amine-based sacrificial agents for the photochemical synthesis.

Cobalt-based metal-organic frameworks for the photocatalytic reduction of carbon dioxide

Metal-organic frameworks (MOFs) are porous materials composed of metal centers and organic connectors. They are formed by complexation reactions and exhibit characteristics of both polymers and coordination compounds. They exhibit numerous advantageous features, including a large specific surface area, adjustable pore size/shape, and modifiable pore wall functional groups. Consequently, MOFs have been extensively applied in the photocatalytic reduction of carbon dioxide (CO2). Despite considerable research on cobalt-based MOFs, the photocatalytic reduction of CO2 in the presence of these materials remains challenging. The present review summarizes the current studies concerning the utilization of cobalt-based MOFs in the photocatalytic reduction of CO2. Additionally, approaches used to enhance the catalytic reduction performance are evaluated and the challenges associated with Co-based MOFs are discussed.

H-Bond-Mediated Selectivity Control of Formate versus CO during CO2 Photoreduction with Two Cooperative Cu/X Sites

It is highly desirable to achieve solar-driven conversion of CO₂ to valuable fuels with controlled selectivity. The existing catalysts are mainly explored for CO production but rarely for formate generation. Herein, highly selective photoreduction of CO₂ to formate (99.7%) was achieved with a high yield of 3040 μmol g^-1 in 10 h by hierarchical integration of photosensitizers and monometallic [bpy-Cu/ClX] (X = Cl or adenine) catalysts into a stable Eu-bpy metal-organic framework. However, replacing X with pyridine in [bpy-CuCl/X] significantly reduced formate production while increasing the CO yield to 960 μmol g^-1. Systematic investigations revealed that the catalytic process is mediated by the H-bond synergy between Cu-bound X and CO₂-derived species, and the selectivity of HCOO^- can be controlled by simply replacing the coordination ligands. This work provides a molecularly precise structural model to provide mechanistic insights for selectivity control of CO₂ photoreduction.

Single-Atom Catalysts Derived from Metal-Organic Frameworks for Electrochemical Applications

Single-atom catalysts (SACs) have received tremendous attention due to their extraordinary catalytic performances. The synthesis of this kind of catalysts is highly desired and challenging. In the last few years, metal-organic frameworks (MOFs) have been demonstrated as a promising precursor for fabricating SACs. In this review, the progress and recent advances in the synthesis of MOF-derived SACs and their electrochemical applications are summarized. First, the synthetic approaches based on MOFs and accessible characterization techniques for SACs as well as their advantages/disadvantages are discussed. Then, the electrochemical applications of these MOF-derived SACs including the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), CO₂ reduction reaction (CO₂ RR), nitrogen reduction reaction (NRR), and other energy-related reactions are reviewed. Finally, insights into the current challenges and future prospects of this field are briefly presented.

Recent advances in visible-light-driven carbon dioxide reduction by metal-organic frameworks

Metal-organic frameworks (MOFs) have emerged as promising materials and have attracted researchers due to their unique chemical and physical properties-design flexibility, tuneable pore channels, a high surface-to-volume ratio that allow their distinct application in diverse research fields-gas storage, gas separation, catalysis, adsorption, drug delivery, ion exchange, sensing, etc. The rapidly growing CO₂ in the atmosphere is a global concern due to the excessive use of fossil fuels in the current era. CO₂ is the prime cause of global warming and should be ameliorated either through adsorption or conversion into value-added products to protect the environment and mankind. Nowadays, MOFs are exploited as a photocatalyst for applications of CO₂ reduction. Since the use of semiconductors limits the use of visible light for photocatalytic reduction of CO₂, MOFs are promising options. The current review describes recent development in the application of MOFs as host, composites, and their derivatives in photocatalytic reduction of CO₂ to CO and different organic chemicals (HCOOH, CH₃OH, CH₄). Efficient charge separation and visible light absorption by incorporation of active sites for efficient photocatalysis have been discussed. The selection of material for high CO₂ uptake and potential strategies for the rational design and development of high-performance catalysts are outlined. Major challenges and future perspectives have also been discussed at the last of the review.

Tuning Crystallinity and Surface Hydrophobicity of a Cobalt Phosphide Cocatalyst to Boost CO2 Photoreduction Performance

Photocatalytic CO₂ conversion is a promising method to yield carbon fuels, but it remains challenging to regulate catalytic materials for enhanced reaction efficiency and tunable product selectivity. This study concerns the development of a facile and efficient thermal post-treatment method to improve the crystallinity and surface hydrophobicity of a cobalt phosphide (CoP) cocatalyst, which promotes the separation and transfer of photoexcited charge carriers, reinforces CO₂ chemisorption, and weakens the H₂ O affinity. Compared with pristine CoP, the optimal CoP-600 cocatalyst displays a 3.5-fold enhancement in activity and a 2.3-fold increase in selectivity for the reduction of CO₂ to CO with a high rate of 68.1 μmol h^-1 .

Facile electron delivery from graphene template to ultrathin metal-organic layers for boosting CO2 photoreduction

Metal-organic layers with ordered structure and molecular tunability are of great potential as heterogeneous catalysts due to their readily accessible active sites. Herein, we demonstrate a facile template strategy to prepare metal-organic layers with a uniform thickness of three metal coordination layers (ca. 1.5 nm) with graphene oxide as both template and electron mediator. The resulting hybrid catalyst exhibits an excellent performance for CO₂ photoreduction with a total CO yield of 3133 mmol g^–1_MOL (CO selectivity of 95%), ca. 34 times higher than that of bulky Co-based metal-organic framework. Systematic studies reveal that well-exposed active sites in metal-organic layers, and facile electron transfer between heterogeneous and homogeneous components mediated by graphene oxide, greatly contribute to its high activity. This work highlights a facile way for constructing ultrathin metal-organic layers and demonstrates charge transfer pathway between conductive template and catalyst for boosting photocatalysis.

While solar-to-fuel energy conversion is appealing, materials require accessible active sites for reactants and rapid electron transfer steps. Here, authors support ultrathin metal-organic layers with graphene oxide as both template and electron mediator to boost CO₂ photoreduction performance.

Critical Aspects of Metal-Organic Framework-Based Materials for Solar-Driven CO2 Reduction into Valuable Fuels

Photoreduction of CO2 into value-added fuels is one of the most promising strategies for tackling the energy crisis and mitigating the "greenhouse effect." Recently, metal-organic frameworks (MOFs) have been widely investigated in the field of CO2 photoreduction owing to their high CO2 uptake and adjustable functional groups. The fundamental factors and state-of-the-art advancements in MOFs for photocatalytic CO2 reduction are summarized from the critical perspectives of light absorption, carrier dynamics, adsorption/activation, and reaction on the surface of photocatalysts, which are the three main critical aspects for CO2 photoreduction and determine the overall photocatalytic efficiency. In view of the merits of porous materials, recent progress of three other types of porous materials are also briefly summarized, namely zeolite-based, covalent-organic frameworks based (COFs-based), and porous semiconductor or organic polymer based photocatalysts. The remarkable performance of these porous materials for solar-driven CO2 reduction systems is highlighted. Finally, challenges and opportunities of porous materials for photocatalytic CO2 reduction are presented, aiming to provide a new viewpoint for improving the overall photocatalytic CO2 reduction efficiency with porous materials.

The simultaneous adsorption, activation and in situ reduction of carbon dioxide over Au-loading BiOCl with rich oxygen vacancies

The main process of carbon dioxide (CO₂) photoreduction is that excited electrons are transported to surface active sites to reduce adsorbed CO₂ molecules. Obviously, electron transfer to the active site is one of the key steps in this process. However, current catalysts for CO₂ adsorption, activation, and electron reduction occur in different locations, which greatly reduce the efficiency of photocatalysis. Herein, through a spontaneous chemical redox approach, the plasmonic photocatalysts of Au-BiOCl-OV with enhanced interfacial interaction were fabricated for visible light CO₂ reduction through the simultaneous adsorption, activation and in situ reduction of CO₂ without a sacrificial agent. By loading gold (Au) on the oxygen vacancy (OV), Au and BiOCl-OV formed a direct and tight interface contact, whose fine structure was confirmed by SEM, TEM, EPR and XPS, which not only effectively boosts the light utilization efficiency and the light carrier separation ability, but also can simultaneously adsorb, activate and in situ reduce carbon dioxide for highly efficient visible light photocatalysis. Thanks to the synergistic influence of Au and OV, Au-BiOCl-OV exhibits excellent photocatalytic performance without sacrificial agent and outstanding stability with a high CO and CH₄ production yield, reaching 4.85 μmol g^-1 h^-1, which were 2.8 times higher than C-Au-BiOCl-OV (obtained by traditional NaBH₄ reduction). This study proposes a new strategy for the production of high-performance collaborative catalysis in photocatalytic CO₂ reduction.

Recent strategies to improve the photoactivity of metal-organic frameworks

Metal-organic frameworks (MOFs) are micro/mesoporous crystalline materials with high surface area, tunability, and compositional diversity and have been widely used in diverse applications, including catalysis. The rigid framework built from organic and inorganic functional structures can offer the merits of both, providing a platform to convert solar energy into usable or storable energy. Various approaches such as bandgap engineering, modulating the charge separation and increasing the intrinsic activity have been developed to improve the photocatalytic performance. This frontier article summarizes the current state-of-the-art in the use of MOFs as photocatalysts, emphasizing the recent strategies to optimize their visible-light-driven catalytic activities. Hopefully, this review could foreshadow new guidelines for explaining the current interest in exploiting novel MOF-based photocatalysts.

A Cu(I) based boron imidazolate framework for visible light driven CO2 reduction

A new Cu(i) based boron imidazolate framework, Cu[BH(im)3] (BIF-105, im = imidazole), with a two-dimensional fes-type layer structure was designed and synthesized. The resulting BIF-105 exhibited efficient photocatalytic performance for CO2 reduction with an evolution rate of 933 μmol g-1 h-1 and a selectivity of 83.4% for CO under visible light irradiation, with [Ru(bpy)3]Cl2 as the light absorber and triethanolamine as a sacrificial agent.