Topochemical Synthesis of Single-Crystalline Hydrogen-Bonded Cross-Linked Organic Frameworks and Their Guest-Induced Elastic Expansion

Guest-Regulated Luminescence and Force-Stimuli Response of a Hydrogen-Bonded Organic Framework

Guest molecules may endow porous materials with new or enhanced properties as well as functions. Here, a porous hydrogen-bonded organic framework (HOF) constructed from a three-armed triphenylamine derivative is used to investigate how guests regulate photoluminescence and trigger force-stimuli response. It was found that guest solvents in pores might regulate HOF's luminescence. Interestingly, acetic acid as a guest endowed HOF materials with longer emission wavelengths and triggered the responses to mechanical force stimuli. Under shear force, an obvious blueshift in emission spectra was observed because of the loss of free guests and the conversion of π-stacking model. Further blue-shifted emission appeared while the bound guests were completely removed by heating. Mechanofluorochromic HOF materials could be regenerated through recrystallization and adsorbing guest. Conversely, HOFs with other guests and activated HOFs only resulted in a slight change in their fluorescence behaviors after force stimuli.

Polymers with advanced structural and supramolecular features synthesized through topochemical polymerization

Polymers are an integral part of our daily life. Hence, there are constant efforts towards synthesizing novel polymers with unique properties. As the composition and packing of polymer chains influence polymer's properties, sophisticated control over the molecular and supramolecular structure of the polymer helps tailor its properties as desired. However, such precise control via conventional solution-state synthesis is challenging. Topochemical polymerization (TP), a solvent- and catalyst-free reaction that occurs under the confinement of a crystal lattice, offers profound control over the molecular structure and supramolecular architecture of a polymer and usually results in ordered polymers. In particular, single-crystal-to-single-crystal (SCSC) TP is advantageous as we can correlate the structure and packing of polymer chains with their properties. By designing molecules appended with suitable reactive moieties and utilizing the principles of supramolecular chemistry to align them in a reactive orientation, the synthesis of higher-dimensional polymers and divergent topologies has been achieved via TP. Though there are a few reviews on TP in the literature, an exclusive review showcasing the topochemical synthesis of polymers with advanced structural features is not available. In this perspective, we present selected examples of the topochemical synthesis of organic polymers with sophisticated structures like ladders, tubular polymers, alternating copolymers, polymer blends, and other interesting topologies. We also detail some strategies adopted for obtaining distinct polymers from the same monomer. Finally, we highlight the main challenges and prospects for developing advanced polymers via TP and inspire future directions in this area.

Topochemical polymerizations for the solid-state synthesis of organic polymers

Topochemical polymerizations are solid-state reactions driven by the alignment of monomers in the crystalline state. The molecular confinement in the monomer crystal lattice offers precise control over the tacticity, packing and crystallinity of the polymer formed in the topochemical reaction. As topochemical reactions occur under solvent- and catalyst-free conditions, giving products in high yield and selectivity/specificity that do not require tedious chromatographic purification, topochemical polymerizations are highly attractive over traditional solution-phase polymer synthesis. By this method, polymers having sophisticated structures and desired topologies can be availed. Often, such ordered packing confers attractive properties to the topochemically-synthesized polymers. Diverse categories of topochemical polymerizations are known, such as polymerizations via [2+2], [4+4], [4+2], and [3+2] cycloadditions, and polymerization of diynes, triynes, dienes, trienes, and quinodimethanes, each of which proceed under suitable stimuli like heat, light or pressure. Each class of these reactions requires a unique packing arrangement of the corresponding monomers for the smooth reaction and produces polymers with distinct properties. This review is penned with the intent of bringing all the types of topochemical polymerizations into a single platform and communicating the versatility of these lattice-controlled polymerizations. We present a brief history of the development of each category and comprehensively review the topochemical synthesis of fully-organic polymers reported in the last twenty years, particularly in crystals. We mainly focus on the various molecular designs and crystal engineering strategies adopted to align monomers in a suitable orientation for polymerization. Finally, we analyze the current challenges and future perspectives in this research field.

Topochemical synthesis of low-dimensional nanomaterials

Over the past several decades, nanomaterials have been extensively studied owing to having a series of unique physical and chemical properties that exceed those of conventional bulk materials. Researchers have developed a lot of strategies for the synthesis of low-dimensional nanomaterials. Among them, topochemical synthesis has attracted increasing attention because it can provide more new nanomaterials by improving and upgrading inexpensive and accessible nanomaterials. In this review, we summarize and analyze many existing topochemical synthesis methods, including selective etching, liquid phase reactions, high-temperature atmosphere reactions, electrochemically assisted methods, etc. The future direction of topochemical synthesis is also proposed.

Designed Synthesis of a 1D Polymer in Twist-Stacked Topology via Single-Crystal-to-Single-Crystal Polymerization

To synthesize a fully organic 1D polymer in a novel twist-stacked topology, we designed a peptide monomer HC≡CCH₂ -NH-Ile-Leu-N₃ , which crystallizes with its molecules H-bonded along a six-fold screw axis. These H-bonded columns pack parallelly such that molecules arrange head-to-tail, forming linear non-covalent chains in planes perpendicular to the screw axis. The chains arrange parallelly to form molecular layers which twist-stack along the screw axis. Crystals of this monomer, on heating, undergo single-crystal-to-single-crystal (SCSC) topochemical azide-alkyne cycloaddition (TAAC) polymerization to yield an exclusively 1,4-triazole-linked polymer in a twist-stacked layered topology. This topologically defined polymer shows better mechanical strength and thermal stability than its unordered form, as evidenced by nanoindentation studies and thermogravimetric analysis, respectively. This work illustrates the scope of topochemical polymerizations for synthesizing polymers in pre-decided topologies.

How to use X-ray diffraction to elucidate 2D polymerization propagation in single crystals

Covalent long-range ordered (crystalline) sheets called 2D polymers have recently been synthesized by irradiating single crystals of suitably packed monomers. To have such an action proceed successfully, billions of bond formation processes have to be mastered exclusively in two dimensions within 3D crystals. This raises questions as to how to elucidate the mechanism of these unusual polymerizations as well as their entire strain management. The article will show that single crystal X-ray diffraction based on both Bragg and diffuse scattering are powerful techniques to achieve such goal. The very heart of both techniques will be explained and it will be shown what can be safely concluded with their help and what not. Consequently, the reader will understand why some crystals break during polymerization, while others stay intact. This understanding will then be molded into a few guidelines that should help pave the way for future developments of 2D polymers by those interested in joining the effort with this fascinating and emerging class of 2D materials.

Tetraphenylethene-Based Supramolecular Coordination Frameworks with Aggregation-Induced Emission for an Artificial Light-Harvesting System

Supramolecular coordination is an efficient strategy to construct supramolecular coordination frameworks with predesigned structures, assembled shapes, and specific function. In this work, we report the synthesis, structural characterization, and photophysical property of two tetraphenylethene-based supramolecular coordination frameworks 1a and 1b formed from 1,1,2,2-tetrakis(4-(pyridin-4-yl)phenyl)ethene (2a) or 1,1,2,2-tetrakis(4-((E)-2-(pyridin-4-yl)vinyl)phenyl)ethene (2b) and a linear difunctional platinum(II) ligand (3a) via coordination-driven self-assembly. Controlled by the specific angularity and geometry of tetraphenylethene (with 60° and 120°) and difunctional Pt(II) linker (with 180°), these supramolecular coordination frameworks possess a well-defined and two-dimensional (2D) rhombic network-type topology with good periodicity and porosity. Given the aggregation-induced emission (AIE) property of tetraphenylethene units and the porosity of frameworks, 1a and 1b have been successfully used as fluorescent platforms and energy donors to fabricate efficient artificial light-harvesting materials with two fluorescent acceptors (Nile Red and Sulforhodamine 101) via noncovalent interactions in aqueous solution. Furthermore, these light-harvesting materials have been applied for promoting cancer cell imaging with a full shift of imaging channels from blue/green channels to the red channel. Thus, this study provides an effective approach to fabricate functional frameworks as fluorescent platforms for developing more fluorescent materials.

Solid-state 1D → 3D transformation of polynitrile-based coordination polymers by dehydration reaction

In crystal structures of two chain coordination polymers [M(tcnopr3OH)₂(H₂O)₂] (M = Ni^II and Co^II; tcnopr3OH^- = [(NC)₂CC(O(CH₂)₃OH)C(CN)₂]^-) based on a N,O or N,N'-bridge polynitrile ligand, the parallel chains are connected via, respectively, C[triple bond, length as m-dash]NH-O and O-HO hydrogen bonds between uncoordinated functional groups of the ligand and coordinated water molecules. Upon heating, both solids undergo dehydration accompanied by degradation of their single crystals. Powder X-ray diffraction showed that non-isostructural triclinic single crystals transformed to isostructural monoclinic compounds. The solid-state reaction yielded 3D coordination polymers [M(tcnopr3OH)₂] (M = Ni^II and Co^II) based on a N,N',O-connected tcnopr3OH^-. Although previously tens of complexes based on tcnopr3OH and similar anions were synthesized and X-ray characterized, none of these contain a tridentate polynitrile ligand. Thus, this study provides evidence that solid-state reactions allow obtaining novel coordination modes of polynitrile ligands. The possible pathways for the transformation of H-bonded networks to 3D coordination polymers are discussed on the basis of the topological approach. Applicability of the topological approach to predict possible networks of solid-state reaction products based on the crystal structures of initial compounds is demonstrated.

Host-Guest Recognition and Fluorescence of a Tetraphenylethene-Based Octacationic Cage

We report the synthesis and characterization of a three-dimensional tetraphenylethene-based octacationic cage that shows host-guest recognition of polycyclic aromatic hydrocarbons (e.g. coronene) in organic media and water-soluble dyes (e.g. sulforhodamine 101) in aqueous media through CH⋅⋅⋅π, π-π, and/or electrostatic interactions. The cage⊃coronene exhibits a cuboid internal cavity with a size of approximately 17.2×11.0×6.96 ų and a "hamburger"-type host-guest complex, which is hierarchically stacked into 1D nanotubes and a 3D supramolecular framework. The free cage possesses a similar cavity in the crystalline state. Furthermore, a host-guest complex formed between the octacationic cage and sulforhodamine 101 had a higher absolute quantum yield (Φ_F =28.5 %), larger excitation-emission gap (Δλ_ex-em =211 nm), and longer emission lifetime (τ=7.0 ns) as compared to the guest (Φ_F =10.5 %; Δλ_ex-em =11 nm; τ=4.9 ns), and purer emission (Δλ_FWHM =38 nm) as compared to the host (Δλ_FWHM =111 nm).

Probing the distinct nanomechanical behaviour of a new co-crystal and a known solvate of 5-fluoroisatin and identification of a new polymorph

Crystalline forms of 5-fluoroisatin have been characterized by thermal, structural, and mechanical methods. The hardness and elastic modulus of the DMSO solvate is significantly higher than those of the picolinic acid co-crystal of 5-fluoroisatin.