In Situ FT-IR Spectroscopic Study of CO2 and CO Adsorption on Y2O3, ZrO2, and Yttria-Stabilized ZrO2

CO2 methanation mechanism over Ni/Y2O3: an in situ diffuse reflectance infrared Fourier transform spectroscopic study

Supported Ni catalysts are active in CO2 methanation. It is important to understand the reaction mechanism for the development of highly-active catalysts. In this study, we investigated the reaction pathways of CO2 methanation over Ni/Y2O3 and Ni/Al2O3 based on the adsorbates observed by diffuse reflectance infrared Fourier transform spectroscopy. For Ni/Al2O3, linear and bridged CO adsorbates were converted to nickel carbonyl hydride and/or formyl species, which would be further hydrogenated to methane. In contrast, the formation of formate adsorbates was specifically confirmed over Ni/Y2O3 under the CO2 methanation condition. The hydrogen molecule was activated by dissociatively-adsorbing on Ni particles. Then, the hydrogenation of formate adsorbates by the activated hydrogen species proceeded sequentially to form methane. The observed bridged CO species would not be a major intermediate for Ni/Y2O3.

Elucidating the Influence of Electric Fields toward CO2 Activation on YSZ (111)

Despite its high thermodynamic stability, the presence of a negative electric field is known to facilitate the activation of CO2 through electrostatic effects. To utilize electric fields for a reverse water gas shift reaction, it is critical to elucidate the role of an electric field on a catalyst surface toward activating a CO2 molecule. We conduct a first-principles study to gain an atomic and electronic description of adsorbed CO2 on YSZ (111) surfaces when external electric fields of +1 V/Å, 0 V/Å, and −1 V/Å are applied. We find that the application of an external electric field generally destabilizes oxide bonds, where the direction of the field affects the location of the most favorable oxygen vacancy. The direction of the field also drastically impacts how CO2 adsorbs on the surface. CO2 is bound by physisorption when a +1 V/Å field is applied, a similar interaction as to how it is adsorbed in the absence of a field. This interaction changes to chemisorption when the surface is exposed to a −1 V/Å field value, resulting in the formation of a CO3− complex. The strong interaction is reflected through a direct charge transfer and an orbital splitting within the Olatticep-states. While CO2 remains physisorbed when a +1 V/Å field value is applied, our total density of states analysis indicates that a positive field pulls the charge away from the adsorbate, resulting in a shift of its bonding and antibonding peaks to higher energies, allowing a stronger interaction with YSZ (111). Ultimately, the effect of an electric field toward CO2 adsorption is not negligible, and there is potential in utilizing electric fields to favor the thermodynamics of CO2 reduction on heterogeneous catalysts.

Ammonium ion-promoted electrochemical production of synthetic gas from water and carbon dioxide on a fluorine-doped tin oxide electrode

In situ generated Sn nanoparticles on fluorine-doped tin oxide act as an electrocatalyst for the CO2 reduction reaction to efficiently and stably produce synthetic gas from water and carbon dioxide with the reaction rate drastically enhanced by the addition of ammonium ions.

Operando Fourier-transform infrared-mass spectrometry reactor cell setup for heterogeneous catalysis with glovebox transfer process to surface-chemical characterization

We describe a new type of operando Fourier transform infrared (FTIR)-mass spectrometry setup for surface-chemical and reactivity characterization of heterogeneous catalysts. On the basis of a sophisticated all-quartz FTIR reactor cell, capable of operating between room temperature and 1000 °C in reactive gas atmospheres, the setup offers a unique opportunity to simultaneously collect and accordingly correlate FTIR surface-chemical adsorption data of the active catalyst state and FTIR gas phase data with complementary reactivity data obtained via mass spectrometry in situ. The full set of catalytic operation modes (recirculating static and flow reactor conditions) is accessible and can be complemented with a variety of temperature-programmed reaction modes or thermal desorption. Due to the unique transfer process involving a home-built portable glovebox to avoid air exposure, a variety of complementary quasi in situ characterization methods for the pre- and post-reaction catalyst states become accessible. We exemplify the capabilities for additional x-ray photoelectron spectroscopy characterization of surface-chemical states, highlighting the unique strength of combining adsorption, electronic structure, and reactivity data to gain detailed insight into the reactive state of a Cu/ZrO₂ heterogeneous catalyst during methanol steam reforming operation.

Zeolite-Encaged Pd-Mn Nanocatalysts for CO2 Hydrogenation and Formic Acid Dehydrogenation

A CO₂ -mediated hydrogen storage energy cycle is a promising way to implement a hydrogen economy, but the exploration of efficient catalysts to achieve this process remains challenging. Herein, sub-nanometer Pd-Mn clusters were encaged within silicalite-1 (S-1) zeolites by a ligand-protected method under direct hydrothermal conditions. The obtained zeolite-encaged metallic nanocatalysts exhibited extraordinary catalytic activity and durability in both CO₂ hydrogenation into formate and formic acid (FA) dehydrogenation back to CO₂ and hydrogen. Thanks to the formation of ultrasmall metal clusters and the synergic effect of bimetallic components, the PdMn_0.6 @S-1 catalyst afforded a formate generation rate of 2151 mol_formate  mol_Pd ^-1  h^-1 at 353 K, and an initial turnover frequency of 6860 mol H 2  mol_Pd ^-1  h^-1 for CO-free FA decomposition at 333 K without any additive. Both values represent the top levels among state-of-the-art heterogeneous catalysts under similar conditions. This work demonstrates that zeolite-encaged metallic catalysts hold great promise to realize CO₂ -mediated hydrogen energy cycles in the future that feature fast charge and release kinetics.

Chemoresistive CO2 Gas Sensors Based On La2O2CO3: Sensing Mechanism Insights Provided by Operando Characterization

Our previous studies demonstrated that rare-earth oxycarbonates Ln₂O₂CO₃ (Ln = La, Nd, and Sm) and rare-earth oxides Ln₂O₃ (Ln = Nd, Sm, Gd, Dy, Er, and Yb) are sensitive to CO₂ and that hexagonal La₂O₂CO₃ is the best among them in terms of sensitivity, stability, and selectivity. In this study, we have conducted a comprehensive operando characterization on a hexagonal La₂O₂CO₃ based sensor for the basic understanding of the sensing mechanism. This was done by performing under actual operating conditions simultaneous DC resistance and work function changes measurements, AC impedance spectroscopy measurements, and simultaneous DC resistance and DRIFT spectroscopy measurements. The results demonstrate that the double Schottky barriers at grain-grain boundaries are dominant contribution to sensor resistance; there is a competitive adsorption between carbonate species and hydroxyl groups, which depends on both CO₂ concentration and humidity and leads to the change in height of the Schottky barriers. Finally, we propose a reaction model stating that there are three types of adsorbates, -CO₃^2-, -OH^-, and -O^2-, and the relative concentration of which is controlled by a reaction with ambient humidity and CO₂. This model is able to consistently explain all our experimental findings.

Elucidation of Water Promoter Effect of Proton Conductor in WGS Reaction over Pt-Based Catalyst: An Operando DRIFTS Study

A conventional Pt/CeO2/Al2O3 catalyst physically mixed with an ionic conductor (Mo- or Eu-doped ZrO2) was tested at high space velocity (20,000 h−1 and 80 L h−1 gcat−1) under model conditions (only with CO and H2O) and industrial conditions, with a realistic feed. The promoted system with the ionic conductor physically mixed showed better catalytic activity associated with better water dissociation and mobility, considered as a rate-determining step. The water activation was assessed by operando diffuse reflectance infrared fourier transformed spectroscopy (DRIFTS) studies under reaction conditions and the Mo-containing ionic conductor exhibited the presence of both dissociated (3724 cm−1) and physisorbed (5239 cm−1) water on the Eu-doped ZrO2 solid solution, which supports the appearance of proton conductivity by Grotthuss mechanism. Moreover, the band at 3633 cm−1 ascribed to hydrated Mo oxide, which increases with the temperature, explains the increase of catalytic activity when the physical mixture was used in a water gas shift (WGS) reaction.

Characterization of Acid and Basic Sites on Zirconia Surfaces and Nanoparticles by Adsorbed Probe Molecules: A Theoretical Study

Acid and basic sites on monoclinic and tetragonal zirconia were investigated at the DFT level by computing IR and NMR properties of adsorbed probe molecules. Regular and stepped ZrO2 surfaces as well as stoichiometric zirconia nanoparticles have been considered. Acidity and basicity were probed by the adsorption of carbon monoxide and pyrrole, respectively. CO adsorption shows a positive shift of the C–O stretching frequency in IR spectra while the C atom of CO is shielded and 13C chemical shifts moves to higher field as a function of the strength of the acid site. For the study of basic sites we used a pyrrole molecule, but the interaction between the pyrrole ring and the surface leads to adsorption modes that cannot be used to titrate the surface basicity. On the other hand, at high coverage the molecule assumes an upright position and the formation of a hydrogen bond of the pyrrole NH group with the oxygen atoms of the surfaces provides a proxy of the basic properties of these sites. In particular, we focus on changes of the N–H IR frequency, 1H, 15N, and 17O NMR chemical shifts and their correlations with the surface basicity. Among the correlations found, that between the N–H stretching frequency of adsorbed pyrrole and the 17O NMR chemical shift of the O ion where the molecule is bound show a nice linear correlation. These two properties can provide useful information about the basic character of various O sites on the surface of zirconia.

Graphic Abstract

Selective photocatalytic CO2 reduction over Zn-based layered double hydroxides containing tri or tetravalent metals

Photocatalytic CO₂ reduction holds promise as a future technology for the manufacture of fuels and commodity chemicals. However, factors controlling product selectivity remain poorly understood. Herein, we compared the performance of a homologous series of Zn-based layered double hydroxide (ZnM-LDH) photocatalysts for CO₂ reduction. By varying the trivalent or tetravalent metal cations in the ZnM-LDH photocatalysts (M = Ti⁴⁺, Fe³⁺, Co³⁺, Ga³⁺, Al³⁺), the product selectivity of the reaction could be precisely controlled. ZnTi-LDH afforded CH₄ as the main reduction product; ZnFe-LDH and ZnCo-LDH yielded H₂ exclusively from water splitting; whilst ZnGa-LDH and ZnAl-LDH generated CO. In-situ diffuse reflectance infrared measurements, valence band XPS and density function theory calculations were applied to rationalize the CO₂ reduction selectivities of the different ZnM-LDH photocatalysts. The analyses revealed that the d-band center (ε_d) position of the M³⁺ or M⁴⁺ cations controlled the adsorption strength of CO₂ and thus the selectivity to carbon-containing products or H₂. Cations with d-band centers relatively close to the Fermi level (Ti⁴⁺, Ga³⁺ and Al³⁺) adsorbed CO₂ strongly yielding CH₄ or CO, whereas metal cations with d-band centers further from the Fermi level (Fe³⁺ and Co³⁺) adsorbed CO₂ poorly, thereby yielding H₂ only (from water splitting). Our findings clarify the role of trivalent and tetravalent metal cations in LDH photocatalysts for the selective CO₂ reduction, paving new ways for the development of improved LDH photocatalyst with high selectivities to specific products.

Defects in nanosilica catalytically convert CO2 to methane without any metal and ligand

Active and stable metal-free heterogeneous catalysts for CO₂ fixation are required to reduce the current high level of carbon dioxide in the atmosphere, which is driving climate change. In this work, we show that defects in nanosilica (E' centers, oxygen vacancies, and nonbridging oxygen hole centers) convert CO₂ to methane with excellent productivity and selectivity. Neither metal nor complex organic ligands were required, and the defect alone acted as catalytic sites for carbon dioxide activation and hydrogen dissociation and their cooperative action converted CO₂ to methane. Unlike metal catalysts, which become deactivated with time, the defect-containing nanosilica showed significantly better stability. Notably, the catalyst can be regenerated by simple heating in the air without the need for hydrogen gas. Surprisingly, the catalytic activity for methane production increased significantly after every regeneration cycle, reaching more than double the methane production rate after eight regeneration cycles. This activated catalyst remained stable for more than 200 h. Detailed understanding of the role of the various defect sites in terms of their concentrations and proximities as well as their cooperativity in activating CO₂ and dissociating hydrogen to produce methane was achieved.

Yttria-Stabilized Zirconia as a High-Performance Catalyst for Ethanol to n-Butanol Guerbet Coupling

It has been shown that yttria-stabilized zirconia is an effective catalyst for ethanol to n-butanol Guerbet coupling. The variation of the calcination temperature allows an improvement in the catalytic characteristics of this material via stabilization of the tetragonal phase of zirconia, having higher basicity than the monoclinic one. The treatment of yttria-stabilized zirconia at an optimal calcination temperature of 500 °C induces the increase in surface basicity required for the aldol condensation step, along with a decrease in surface acidity, which is responsible for the side reaction such as ethylene formation. The catalyst obtained significantly exceeds in selectivity and n-butanol yield than individual zirconia and other oxide systems which have been studied in this reaction.

Design of core-shell titania-heteropolyacid-metal nanocomposites for photocatalytic reduction of CO2 to CO at ambient temperature

The photocatalytic conversion of CO₂ not only reduces the greenhouse effect, but also provides value-added solar fuels and chemicals. Herein, we report the design of new efficient core-shell nanocomposites for selective photocatalytic CO₂ to CO conversion, which occurs at ambient temperature. A combination of characterization techniques (TEM, STEM-EDX, XPS, XRD, FTIR photoluminescence) indicates that the CO₂ reduction occurs over zinc species highly dispersed on the heteropolyacid/titania core-shell nanocomposites. These core-shell structures create a semiconductor heterojunction, which increases charge separation and the lifetime of charge carriers' and leads to higher electron flux. In situ FTIR investigation of the reaction mechanism revealed that the reaction involved surface zinc bicarbonates as key reaction intermediates. In a series of catalysts containing noble and transition metals, zinc phosphotungstic acid-titania nanocomposites exhibit high activity reaching 50 μmol CO g^-1 h^-1 and selectivity (73%) in the CO₂ photocatalytic reduction to CO at ambient temperature. The competitive water splitting reaction has been significantly suppressed over the Zn sites in the presence of CO₂.

Important Role of Strontium Atom on the Surface of Sr2KTa5O15 with a Tetragonal Tungsten Bronze Structure to Improve Adsorption of CO2 for Photocatalytic Conversion of CO2 by H2O

Sr_1.6K_0.37Na_1.43Ta₅O₁₅, which belongs to the Na-substituted Sr₂KTa₅O₁₅ series of compounds with a tetragonal tungsten bronze structure, was fabricated using a flux mixture of KCl and NaCl (KCl/NaCl molar ratio = 55:45). It exhibited higher CO formation rate (94.6 μmol h^-1), better selectivity for CO evolution (85.5%), and better stability of the photocatalytic activity than those of bare Sr₂KTa₅O₁₅ and other Na-substituted Sr₂KTa₅O₁₅ samples synthesized from flux mixtures with different KCl/NaCl ratios. X-ray photoelectron spectroscopic studies revealed that the surface atomic Sr/Ta ratio of Sr_1.6K_0.37Na_1.43Ta₅O₁₅ was larger than that of Sr₂KTa₅O₁₅. To clarify the factor responsible for the improvement in the photocatalytic activity facilitated by Na substitution, as well as to elucidate the reaction mechanism, the surface species were characterized by in situ Fourier transform infrared spectroscopy. It was observed that the bicarbonate species (HCO₃^-) adsorbed on the active Sr sites of Sr_1.6K_0.37Na_1.43Ta₅O₁₅ was reduced to CO via the formate species during photoirradiation. The plot of the CO formation rate vs. the surface atomic Sr/Ta ratio for tetragonal tungsten bronze-type Sr-K-Ta-O complex oxides had the summit, indicating that Sr atoms on the surface enhance the photocatalytic activity, while an excessive amount of Sr on the surface leads to the decrease in the photocatalytic activity. Hence, it can be concluded that while the presence of Sr on the surface has a determining effect on the adsorption of CO₂ and eventually on the photocatalytic activity, excess Sr on the surface that exists as SrCO₃ or Sr₂Ta₂O₇ suppresses the photocatalytic activity. Thus, Sr_1.6K_0.37Na_1.43Ta₅O₁₅ showed higher CO formation rate than Sr₂KTa₅O₁₅ did.

Effect of Preparation Method on ZrO2-Based Catalysts Performance for Isobutanol Synthesis from Syngas

Two types of amorphous ZrO2 (am-ZrO2) catalysts were prepared by different co-precipitation/reflux digestion methods (with ethylenediamine and ammonia as the precipitant respectively). Then, copper and potassium were introduced for modifying ZrO2 via an impregnation method to enhance the catalytic performance. The obtained catalysts were further characterized by means of Brunauer-Emmett-Teller surface areas (BET), X-ray diffraction (XRD), H2-temperature-programmed reduction (H2-TPR), and In situ diffuse reflectance infrared spectroscopy (in situ DRIFTS). CO hydrogenation experiments were performed in a fixed-bed reactor for isobutanol synthesis. Great differences were observed on the distribution of alcohols over the two types of ZrO2 catalysts, which were promoted with the same content of Cu and K. The selectivity of isobutanol on K-CuZrO2 (ammonia as precipitant, A-KCZ) was three times higher than that on K-CuZrO2 (ethylenediamine as precipitant, E-KCZ). The characterization results indicated that the A-KCZ catalyst supplied more active hydroxyls (isolated hydroxyls) for anchoring and dispersing Cu. More importantly, it was found that bicarbonate species were formed, which were ascribed as important C1 species for isobutanol formation on the A-KCZ catalyst surface. These C1 intermediates had relatively stronger adsorption strength than those adsorbed on the E-KCZ catalyst, indicating that the bicarbonate species on the A-KCZ catalyst had a longer residence time for further carbon chain growth. Therefore, the selectivity of isobutanol was greatly enhanced. These findings would extend the horizontal of direct alcohols synthesis from syngas.

Comparative study on the catalytic activity of Fe-doped ZrO2 nanoparticles without significant toxicity through chemical treatment under various pH conditions

Despite advances in the construction of catalysts based on metal oxide nanoparticles (MO NPs) for various industrial, biomedical, and daily-life applications, the biosafety concerns about these NPs still remain. Recently, the need to analyze and improve the safety of MO NPs along with attempts to enhance their catalytic performance has been strongly perceived. Here, we prepared multiple variants of Fe-doped zirconium oxide (Fe@ZrO₂) NPs under different pH conditions; then, we assessed their toxicity and finally screened the variant that exhibited the best catalytic performance. To assess the NP toxicity, the prepared NPs were introduced into three types of human cells originally obtained from different body parts likely to be most affected by NPs (skin, lung, and kidney). Experimental results from conventional cellular toxicity assays including recently available live-cell imaging indicated that none of the variants exerted severe negative effects on the viability of the human cells and most NPs were intracellular localized outside of nucleus, by which severe genotoxicity is unexpected. In contrast, Fe@ZrO₂ NPs synthesized under a basic condition (pH = 13.0), exhibited the highest catalytic activities for three different reactions; each was biochemical (L-cysteine oxidation) or photochemical one (4-chlorophenol degradation and OH radical formation with benzoic acid). This study demonstrates that catalytic Fe@ZrO₂ NPs with enhanced activities and modest or insignificant toxicity can be effectively developed and further suggests a potential for the use of these particles in conventional chemical reactions as well as in recently emerging biomedical and daily-life nanotechnology applications.

CO2 Reduction by Hydrogen Pre-Reduced Acceptor-Doped Ceria

The reactivity of H₂ pre-reduced acceptor-doped ceria materials Gd_0.10 Ce_0.90 O_2-δ (GDC10) and Sm_0.15 Ce_0.85 O_2-δ (SDC15) was tested with respect to the reduction of CO₂ to CO in the context of the reverse water-gas shift reaction. It was demonstrated that not only oxygen vacancies, but also dissolved hydrogen is a reactive species for the reduction of CO₂ . Dissolved hydrogen must be considered upon discussion of the mechanism of the reverse water-gas shift reaction on ceria-derived materials apart from oxygen vacancies and formates. The reduction of CO₂ is preceded by the formation of carbonate species of different thermal stability and reactivity. The stability of these carbonates was directly demonstrated by in situ infrared spectroscopy and revealed the largely reversible nature of CO₂ ad- and desorption. In comparison to pre-reduced samples, decreased carbonate coverage is obtained after oxidative treatments of GDC10 and SDC15. No significant effect of the sample treatment (O₂ oxidation or H₂ reduction) on the surface carbonate stability was noticed. Mono-dentate carbonates and carboxylates appear to be more easily formed on pre-reduced (i. e. defective) samples. Ce⁴⁺ reduction to Ce³⁺ (by H₂ ) and re-oxidation to Ce⁴⁺ (by CO₂ ) on GDC10/SDC15 were directly monitored by infrared spectroscopic analysis of a distinct, IR-active electronic transition of Ce³⁺ . These results show the complex interplay of oxygen vacancy/dissolved hydrogen reactivity and surface chemical aspects in acceptor-doped ceria materials.

Hydrophobic Tungsten-Containing MFI-Type Zeolite Films for Exhaust Gas Detection

The assembly of highly hydrophobic nanosized tungsten-containing MFI-type zeolite nanocrystals (W-MFI) in films and further use of the films for selective exhaust gas (CO, CO₂, NO, and NO₂) detection were investigated by operando IR spectroscopy. Because of the hydrophobic nature and presence of tungsten in the framework, the W-MFI films showed excellent sorption capacity toward all analytes, in comparison to the pure silica (Si-MFI) film. The high sensitivity of the W-MFI film toward low concentration of CO₂ and NO₂ (1-3 ppm) was demonstrated. In addition, the interactions between the analytes and zeolite films have been studied by quantum chemical calculation modeling of the W centers based on the density functional theory method.

Pd@H yWO3- x Nanowires Efficiently Catalyze the CO2 Heterogeneous Reduction Reaction with a Pronounced Light Effect

The design of photocatalysts able to reduce CO₂ to value-added chemicals and fuels could enable a closed carbon circular economy. A common theme running through the design of photocatalysts for CO₂ reduction is the utilization of semiconductor materials with high-energy conduction bands able to generate highly reducing electrons. Far less explored in this respect are low-energy conduction band materials such as WO₃. Specifically, we focus attention on the use of Pd nanocrystal decorated WO₃ nanowires as a heretofore-unexplored photocatalyst for the hydrogenation of CO₂. Powder X-ray diffraction, thermogravimetric analysis, ultraviolet-visible-near infrared, and in situ X-ray photoelectron spectroscopy analytical techniques elucidate the hydrogen tungsten bronze, H _yWO_{3- x}, as the catalytically active species formed via the H₂ spillover effect by Pd. The existence in H _yWO_{3- x} of Brønsted acid hydroxyls OH, W(V) sites, and oxygen vacancies (V_O) facilitate CO₂ capture and reduction reactions. Under solar irradiation, CO₂ reduction attains CO production rates as high as 3.0 mmol g_cat^-1 hr^-1 with a selectivity exceeding 99%. A combination of reaction kinetic studies and in situ diffuse reflectance infrared Fourier transform spectroscopy measurements provide a valuable insight into thermochemical compared to photochemical surface reaction pathways, considered responsible for the hydrogenation of CO₂ by Pd@H _yWO_{3- x}.

The crucial role of clay binders in the performance of ZSM-5 based materials for biomass catalytic pyrolysis

The effect of agglomerating ZrO₂/n-ZSM-5 catalyst with different clays on biomass catalytic pyrolysis is evaluated.

Visible light-driven enhanced CO2 reduction by water over Cu modified S-doped g-C3N4

We synthesized Cu modified S-doped g-C₃N₄ thin sheets using calcination followed by a wet-impregnation method. The photocatalytic activity was studied for reduction of CO₂ to CO and CH₄ in the presence of water and a plausible mechanism is explained.

Operando Insights into CO Oxidation on Cobalt Oxide Catalysts by NAP-XPS, FTIR, and XRD

Cobalt oxide Co₃O₄ has recently emerged as promising, noble metal-free catalyst for oxidation reactions but a better understanding of the active catalyst under working conditions is required for further development and potential commercialization. An operando approach has been applied, combining near ambient (atmospheric) pressure X-ray photoelectron spectroscopy (NAP-XPS), Fourier transform infrared spectroscopy (FTIR), or X-ray diffraction (XRD) with simultaneous catalytic tests of CO oxidation on Co₃O₄, enabling one to monitor surface and bulk states under various reaction conditions (steady-state and dynamic conditions switching between CO and O₂). On the basis of the surface-specific chemical information a complex network of different reaction pathways unfolded: Mars-van-Krevelen (MvK), CO dissociation followed by carbon oxidation, and formation of carbonates. A possible Langmuir–Hinshelwood (LH) pathway cannot be excluded because of the good activity when no oxygen vacancies were detected. The combined NAP-XPS/FTIR results are in line with a MvK mechanism above 100 °C, involving the Co³⁺/Co²⁺ redox couple and oxygen vacancy formation. Under steady state, the Co₃O₄ surface appeared oxidized and the amount of reduced Co²⁺ species at/near the surface remained low up to 200 °C. Only in pure CO, about 15% of surface reduction were detected, suggesting that the active sites are a minority species. The operando spectroscopic studies also revealed additional reaction pathways: CO dissociation followed by carbon reoxidation and carbonate formation and its decomposition. However, due to their thermal stability in various atmospheres, the carbonates are rather spectators and also CO dissociation seems a minor route. This study thus highlights the benefits of combining operando surface sensitive techniques to gain insight into catalytically active surfaces.

Green Tea Polyphenols Coupled with a Bioactive Titanium Alloy Surface: In Vitro Characterization of Osteoinductive Behavior through a KUSA A1 Cell Study

A chemically-treated titanium alloy (Ti6Al4V) surface, able to induce hydroxyapatite precipitation from body fluids (inorganic mineralization activity), was functionalized with a polyphenolic extract from green tea (tea polyphenols, TPH). Considering that green tea polyphenols have stimulating effects on bone forming cells (biological mineralization), the aim was to test their osteoinductive behavior due to co-operation of inorganic and biological mineralization on mesenchymal stem cells KUSA A1. The functionalized surfaces were characterized by using the Folin⁻Ciocalteu method and X-ray photoelectron spectroscopy to confirm the successful outcome of the functionalization process. Two cell cultures of mesenchymal stem cells, KUSA A1 were performed, with or without osteoinductive factors. The cells and surfaces were characterized for monitoring cell viability and hydroxyapatite production: Fourier Transform Infrared Spectroscopy and Raman spectroscopy analyses showed deposition of hydroxyapatite and collagen due to the cell activity, highlighting differentiation of KUSA A1 into osteoblasts. A higher production of extracellular matrix was highlighted on the functionalized samples by laser microscope and the fluorescence images showed higher viability of cells and greater presence of osteocalcin in these samples. These results highlight the ability of polyphenols to improve cell differentiation and to stimulate biological mineralization, showing that surface functionalization of metal implants could be a promising way to improve osteointegrability.

Vibrational Spectroscopy as a Promising Toolbox for Analyzing Functionalized Ceramic Membranes

Ceramic materials find use in many fields including the life sciences and environmental engineering. For example, ceramic membranes have shown to be promising filters for water treatment and virus retention. The analysis of such materials, however, remains challenging. In the present study, the potential of three vibrational spectroscopic methods for characterizing functionalized ceramic membranes for water treatment is evaluated. For this purpose, Raman scattering, infrared (IR) absorption, and solvent infrared spectroscopy (SIRS) were employed. The data were analyzed with respect to spectral changes as well as using principal component analysis (PCA). The Raman spectra allow an unambiguous discrimination of the sample types. The IR spectra do not change systematically with functionalization state of the material. Solvent infrared spectroscopy allows a systematic distinction and enables studying the molecular interactions between the membrane surface and the solvent.