Multifunctional homopolymer vesicles for facile immobilization of gold nanoparticles and effective water remediation

Highly Efficient Water Decontamination by Using Sub-10 nm FeOOH Confined within Millimeter-Sized Mesoporous Polystyrene Beads

Millimeter-sized polymer-based FeOOH nanoparticles (NPs) provide a promising option to overcome the bottlenecks of direct use of NPs in scaled-up water purification, and decreasing the NP size below 10 nm is expected to improve the decontamination efficiency of the polymeric nanocomposites due to the size and surface effect. However, it is still challenging to control the dwelled FeOOH NP sizes to sub-10 nm, mainly due to the wide pore size distribution of the currently available polymeric hosts. Herein, we synthesized mesoporous polystyrene beads (MesoPS) via flash freezing to assemble FeOOH NPs. The embedded NPs feature with α-crystal form, tunable size ranging from 7.3 to 2.0 nm and narrow size distribution. Adsorption of As(III/V) by the resultant nanocomposites was greatly enhanced over the α-FeOOH NPs of 18 × 60 nm, with the iron mass normalized capacity of As(V) increasing to 10.3 to 14.8 fold over the bulky NPs. Higher density of the surface hydroxyl groups of the embedded NPs as well as their stronger affinity toward As(V) was proved to contribute to such favorable effect. Additionally, the as-obtained nanocomposites could be efficiently regenerated for cyclic runs. We believe this study will shed new light on how to fabricate highly efficient nanocomposites for water decontamination.

Aqueous self-assembly of hydrophobic macromolecules with adjustable rigidity of the backbone

P(FpC₃P) (Fp: CpFe(CO)₂; C₃P: propyl diphenyl phosphine) has a helical backbone, resulting from piano stool metal coordination geometry, which is rigid with intramolecular aromatic interaction of the phenyl groups. The macromolecule is hydrophobic, but the polarized CO groups can interact with water for aqueous self-assembly. The stiffness of P(FpC₃P), which is adjustable by temperature, is an important factor influencing the morphologies of kinetically trapped assemblies. P(FpC₃P)₇ self-assembles in DMSO/water (10/90 by volume) into lamellae at 25 °C, vesicles at 40 °C and irregular aggregates at higher temperatures (60 and 70 °C). The colloidal stability decreases in the order of lamellae, vesicles and irregular aggregates. Dissipative particle dynamics (DPD) simulation reveals the same temperature-dependent self-assembled morphologies with an interior of hydrophobic aromatic groups covered with the metal coordination units. The rigid backbone at 25 °C accounts for the formation of the layered morphology, while the reduced rigidity of the same P(FpC₃P)₇ at 40 °C curves up the lamellae into vesicles. At a higher temperature (60 or 70 °C), P(FpC₃P)₇ behaves as a random coil without obvious amphiphilic segregation, resulting in irregular aggregates. The stiffness is, therefore, a crucial factor for the aqueous assembly of macromolecules without obvious amphiphilic segregation, which is reminiscent of the solution behavior observed for many hydrophobic biological macromolecules such as proteins.

Single-Step Synthesis of Small, Azide-Functionalized Gold Nanoparticles: Versatile, Water-Dispersible Reagents for Click Chemistry

Nanoparticles possessing functional groups that can be readily conjugated (e.g., through click chemistry) are important precursors for the preparation of customized nanohybrid products. Such nanoparticles, if they are stable against agglomeration, are easily dispersible and have well-defined surface chemistry and size. As click-ready reagents, they can be stored until their time of use and then simply dispersed and reacted with an appropriate substrate. Gold nanoparticles (AuNPs) are excellent candidates for this purpose, and some clickable gold nanoparticles have been developed; however, AuNPs for use in aqueous systems are often prepared through difficult multistep processes and/or can be poorly dispersible in water. Here we report a single-step synthesis of clickable, water-dispersible AuNPs. The synthesis yields uniform, 3.5 nm diameter cores coated with a well-defined molecular ligand shell that makes the AuNPs stable and dispersible in water. The AuNP mixed ligand shell consists of hydroxyl-terminated ethylene glycol-based ligands to promote dispersion in water and a small number of azide-terminated ligands that readily undergo click reactions with alkynes. The use of a mesofluidic reactor affords fine control over the core size and ligand shell composition and ensures reproducible results (e.g., less than 0.1 nm variation in core diameter between batches). The purified reagents were successfully coupled to a variety of alkyne-containing substrates using both Cu-catalyzed and strain-promoted click reactions. Particle size, morphology, stability, and surface composition were thoroughly characterized using small-angle X-ray scattering, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis, and ¹H NMR before and after the click reactions. Both the parent nanoparticles and their click chemistry products are stable during storage and remained dispersible for over a year in water, suggesting their potential for environmental, biological, and biomedical applications.

Polymer Vesicle Sensor for Visual and Sensitive Detection of SO2 in Water

This study reports the first polymer vesicle sensor for the visual detection of SO₂ and its derivatives in water. A strong binding ability between tertiary alkanolamines and SO₂ has been used as the driving force for the detection by the graft of tertiary amine alcohol (TAA) groups onto an amphiphilic hyperbranched multiarm polymer, which can self-assemble into vesicles with enriched TAA groups on the surface. The polymer vesicles will undergo proton exchange with cresol red (CR) to produce CR-immobilized vesicles (CR@vesicles). Subsequently, through competitive binding with the TAA groups between CR and SO₂ or HSO₃^-, the CR@vesicles (purple) can quickly change into SO₂@vesicles (colorless) with the release of protonated CR (yellow). Such a fast purple to yellow transition in the solution allows the visual detection of SO₂ or its derivatives in water by the naked eye. A visual test paper for SO₂ gas has also been demonstrated by the adsorption of CR@vesicles onto paper. Meanwhile, the detection limit of CR@vesicles for HSO₃^- is approximately 25 nM, which is improved by approximately 30 times when compared with that of small molecule-based sensors with a similar structure (0.83 μM). Such an enhanced detection sensitivity should be related to the enrichment of TAA groups as well as the CR in CR@vesicles. In addition, the CR@vesicle sensors also show selectivity and specificity for the detection of SO₂ or HSO₃^- among anions such as F^-, Br^-, Cl^-, SO₄^2-, NO₂^-, C₂O₄^2-, S₂O₃^2-, SCN^-, AcO^-, SO₃^2-, S^2-, and HCO₃^-.

Synthesis and self-assembly of a dual-responsive monocleavable ABCD star quaterpolymer

A modularly synthesized core-functionalized PEG-PSt-PCL-PAA miktoarm star can self-assemble into hollow nanocapsules that are sensitive to pH/redox stimuli and H-bond/polyion complexation.

Post-polymerization modification reactions of poly(glycidyl methacrylate)s

Single and multiple post-polymerization modifications of poly(glycidyl methacrylate) scaffold through the nucleophilic ring-opening reactions of the pendent epoxide groups are described.

Multigenerational effects of gold nanoparticles in Caenorhabditis elegans: Continuous versus intermittent exposures

Nanomaterials can become disseminated directly or indirectly into the soil ecosystem through various exposure routes. Thus, it is important to study various deposition routes of nanomaterials into the soil, as well as their toxicities. Here, we investigated the multigenerational effects of gold nanoparticles (AuNPs) on C. elegans after continuous or intermittent food intake. Following continuous exposure, significant differences were observed in the reproduction rate of C. elegans in the F2-F4 generations, which were associated with reproductive system abnormalities. However, following intermittent AuNP exposure in P0 and F3, reproductive system abnormalities and inhibited reproduction rates were observed in F2 and F3. While continuous AuNP exposure impaired reproduction from F2 to F4, intermittent exposure caused more pronounced effects on F3 worms, which may have resulted from damage during the convalescence period up through F2. These data showed the occurrence of multigenerational effects following different exposure patterns, exposure levels, and recovery periods. To our knowledge, this is the first study to demonstrate that multigenerational nano-toxicity is caused by different exposure patterns and provides insights into the unpredictable exposure scenarios of AuNPs and their adverse effects.

Synthesis and Mechanism Insight of a Peptide-Grafted Hyperbranched Polymer Nanosheet with Weak Positive Charges but Excellent Intrinsically Antibacterial Efficacy

Antimicrobial resistance is an increasingly problematic issue in the world and there is a present and urgent need to develop new antimicrobial therapies without drug resistance. Antibacterial polymers are less susceptible to drug resistance but they are prone to inducing serious side effects due to high positive charge. Herein we report a peptide-grafted hyperbranched polymer which can self-assemble into unusual nanosheets with highly effective intrinsically antibacterial activity but weak positive charges (+ 6.1 mV). The hyperbranched polymer was synthesized by sequential Michael addition-based thiol-ene and free radical mediated thiol-ene reactions, and followed by ring-opening polymerization of N-carboxyanhydrides (NCAs). The nanosheet structure was confirmed by transmission electron microscopy (TEM) and atomic force microscopy (AFM) studies. Furthermore, a novel "wrapping and penetrating" antibacterial mechanism of the nanosheets was revealed by TEM and it is the key to significantly decrease the positive charges but have a very low minimum inhibitory concentration (MIC) of 16 μg mL(-1) against typical Gram-positive and Gram-negative bacteria. Overall, our synthetic strategy demonstrates a new insight for synthesizing antibacterial nanomaterials with weak positive charges. Moreover, the unique antibacterial mechanism of our nanosheets may be extended for designing next-generation antibacterial agents without drug resistance.

Hybrid Vesicles with Alterable Fully Covered Armors of Nanoparticles: Fabrication, Catalysis, and Surface-Enhanced Raman Scattering

This work reports on the facile preparation of hybrid polymer vesicles with alterable armors of metal nanoparticles by using a novel hyperbranched polymer vesicle as the templates. The vesicles were prepared through the aqueous self-assembly of a hyperbranched multiarm copolymers with many tertiary amino groups on the surface, which can electrostatically complexed or coordinated with metal ions like AuCl4(-), PtCl6(2-), and Ag(+) ions. Subsequently, the vesicles coated with metal ions can be in situ reduced into metal nanoparticles, through which a series of surface-engineered vesicles (Au@vesicles, Ag@vesicles, Pt@vesicles) with an advantage of fully covered metal nanoparticles on the surface could be readily prepared. The morphologies, structures, and formation mechanism of the as-prepared hybrid vesicles were carefully characterized, and the obtained hybrid vesicles also showed great potentials in catalysis and surface-enhanced Raman scattering (SERS) applications.

A multifunctional statistical copolymer vesicle for water remediation

We report a multifunctional statistical copolymer vesicle for effective water remediation by absorbing PAHs and accelerating catalytic reaction.

Hairy cylinders based on a coil-comb-coil copolymer

We present the preparation and possible formation mechanism of hairy cylinders self-assembled from a coil-comb-coil copolymer.

Reversible catalysis for the reaction between methyl orange and NaBH4 by silver nanoparticles

The reaction between MO and NaBH4 catalyzed by Ag NPs has been studied. Ag NPs catalyzed the reduction of MO rapidly, while adding CTAB into the solution caused the regeneration of MO. Thus, reversible catalysis for the reaction between MO and NaBH4 by Ag NPs was discovered for the first time.

Rationally Engineering Dual Missions in One Statistical Copolymer Nanocapsule: Bacterial Inhibition and Polycyclic Aromatic Hydrocarbon Capturing

Effective inhibition of bacteria and removal of carcinogenic organic pollutants such as polycyclic aromatic hydrocarbons (PAHs) are important technical challenges in water purification because most of the traditional filter membranes are prone to being biologically contaminated by bacteria and difficult to filter off PAHs. Herein we present the synthesis and characterization of a novel multifunctional nanocapsule (vesicle) based on a statistical copolymer, poly[[2-hydroxy-3-(naphthalen-1-ylamino)propyl methacrylate]-stat-[2-(tert-butylamino)ethyl methacrylate]] [P(HNA₂₃-stat-TA₂₀)], which can be easily synthesized in one step. The TA moiety is engineered for effective bacterial inhibition, while the HNA moiety is in charge of the capturing of PAHs by π-π stacking. The nanocapsules can effectively inhibit bacteria and quickly reduce the pyrene content in water to an extremely low residual concentration of 5.6 (in 1 min) or 0.56 (in 60 min) parts per billion (ppb). Moreover, this rational engineering principle could be extended by statistically copolymerizing HNA with other functional monomers for designing a range of multifunctional nanomaterials.

Construction of stable polymeric vesicles based on azobenzene and beta-cyclodextrin grafted poly(glycerol methacrylate)s for potential applications in colon-specific drug delivery

Stable polymeric vesicles constructed from cyclodextrin- and azobenzene-grafted poly(glycerol methacrylate)s exhibited potential applications in colon-specific drug delivery.

Disclosing the nature of thermo-responsiveness of poly(N-isopropyl acrylamide)-based polymeric micelles: aggregation or fusion?

We disclose a fusion-dominated thermo-responsive behaviour of a poly(N-isopropyl acrylamide)-based copolymer micelle by TEM after in situ photo-cross-linking morphologies.

Synthesis and unimolecular micelles of amphiphilic copolymer with dendritic poly(l-lactide) core and poly(ethylene oxide) shell for drug delivery

A novel type of amphiphilic copolymer POSS-(G₃-PLLA-b-PEO-COOH)₈ with a hydrophobic third-generation dendritic PLLA core and a functionalized hydrophilic PEO shell with surface carboxylic groups was synthesized as a carrier for drug delivery.

Silkworm cocoons by cylinders self-assembled from H-shaped alternating polymer brushes

We report a novel silkworm cocoon-like nanostructure based on the 3D hierarchical self-assembly of cylinders which are spontaneously formed by an H-shaped polymer brush comprising a disulfide-bridged spacer and two brushes with alternating PEG and PCL side chains. Crystalline of PCL between adjacent cylinders bridges cylinders.

Single Monomer for Multiple Tasks: Polymerization Induced Self-Assembly, Functionalization and Cross-Linking, and Nanoparticle Loading

Efficient preparation of multifunctional nano-objects with controlled morphologies in one step at high concentrations is synthetically challenging, yet is highly desirable, in a broad range of materials applications. Herein, we address this synthetic hurdle by introducing a single commodity monomer 2-(acetoacetoxy)ethyl methacrylate (AEMA) to realize multiple functions. Facile preparation of both nanospheres and vesicles via polymerization induced self-assembly at concentrations of 20-30% provided defined polymeric nanomaterials with reactive handles inherent to the AEMA units. High-yielding keto-alkoxylamine chemistry was utilized to decorate and cross-link the nano-objects. Nanoparticle loading into the designated location within both nano-objects was exemplified with in situ formation of silver nanoparticles. The concept of using a single monomer capable of both morphology control and multifunctionalization is expected to offer significant opportunities in functional nanomaterials.

Organic/inorganic composite membranes based on poly(L-lactic-co-glycolic acid) and mesoporous silica for effective bone tissue engineering

Fabrication of membranes with excellent biocompatibility and bioactivity remains an important technical challenge in bone tissue engineering. In this paper, poly(l-lactic-co-glycolic acid) (PLGA)-SBA15 (Santa Barbara Amorphous 15) composite membranes were prepared by using an electrospinning technique; PLGA was used as a biocompatible and biodegradable polymer and SBA15 was used as a mesoporous silica. The PLGA-SBA15 composite membrane facilitates the cell attachment and the cell proliferation versus pure PLGA membrane where human bone marrow-derived mesenchymal stem cells (hMSCs) were seeded. Furthermore, the analysis of alkaline phosphatase (ALP) activity indicated that this PLGA-SBA15 composite membrane has better osteogenic induction compared with the pure PLGA membrane. Moreover, the presence of SBA15 increased the loading efficiency of the recombinant human bone morphogenetic protein-2 (rhBMP-2) to the membranes. Furthermore, the composite membrane had optimized sustained release of rhBMP-2. Overall, this PLGA-SBA15 composite is an excellent material for bone tissue engineering.

A multifunctional azobenzene-based polymeric adsorbent for effective water remediation

The efficient removal of trace carcinogenic organic pollutants, such as polycyclic aromatic hydrocarbons (PAHs) and ionic dyes, from water is an important technical challenge. We report a highly effective recyclable multifunctional azobenzene (AZ)-based silica-supported polymeric adsorbent which can simultaneously remove both PAHs and anionic dyes from water to below parts per billion (ppb) level based on multiple interactions such as the hydrophobic effect, π–π stacking and electrostatic interactions, thus providing a new strategy for designer water remediation materials.

Polymer/TiO₂ hybrid vesicles for excellent UV screening and effective encapsulation of antioxidant agents

Presented in this paper is a hybrid polymer/titanium dioxide (TiO2) vesicle that has excellent UV-screening efficacy and strong capacity to encapsulate antioxidant agents. Poly(ethylene oxide)-block-poly(2-(dimethylamino)ethyl methacrylate)-block-polystyrene (PEO-b-PDMAEMA-b-PS) triblock terpolymer was synthesized by atom transfer radical polymerization (ATRP) and then self-assembled into vesicles. Those vesicles showed excellent UV-screening property due to the scattering by vesicles and the absorption by PS vesicle membrane. The selective deposition of solvophobic tetrabutyl titanate in the PDMAEMA shell and the PS membrane of the vesicles led to the formation of polymer/TiO2 hybrid vesicles, resulting in an enhanced UV-screening property by further reflecting and scattering UV radiation. The vesicles can effectively encapsulate antioxidant agents such as ferulic acid (up to 57%), showing a rapid antioxidant capability (within 1 min) and a long-lasting antioxidant effect.

Preparation and mechanism insight of nuclear envelope-like polymer vesicles for facile loading of biomacromolecules and enhanced biocatalytic activity

The facile loading of sensitive and fragile biomacromolecules, such as glucose oxidase, hemoglobin, and ribonucleic acid (RNA), via synthetic vehicles directly in pure aqueous media is an important technical challenge. Inspired by the nucleus pore complex that connects the cell nucleus and the cytoplasm across the nuclear envelope, here we describe the development of a kind of polymeric nuclear envelope-like vesicle (NEV) to address this problem. The NEV is tailored to form the polymer pore complex (70 nm, similar to a nucleus pore complex) within the vesicle membrane based on nanophase segregation, which is confirmed via fluorescence spectrometry and dynamic light scattering (DLS) during self-assembly. This pH-triggered polymer pore complex can mediate the transportation of biomacromolecules across the vesicle membrane. Moreover, the NEVs facilitate the natural consecutive enzyme-catalyzed reactions via the H(+) sponge effect. This simple strategy might also be extended for mimicking other synthetic cell organelles.

Antibacterial polymeric nanostructures for biomedical applications

A topical review on recent advances in the research and applications of antimicrobial polymeric nanostructures, such as silver-decorated polymeric nanostructures, and polymeric micelles and vesicles based on antimicrobial polymers and antimicrobial peptides.

Construction of reverse vesicles from pseudo-graft poly(glycerol methacrylate)s via cyclodextrin–cholesterol interactions

Reverse vesicles were constructed from pseudo-graft amphiphilic copolymers by dint of the host–guest inclusion complexation between β-cyclodextrins and cholesterols, and transformed into organogels by adding trace amounts of water.

Nanoassemblies driven by cyclodextrin-based inclusion complexation

Nanoassemblies driven by cyclodextrin-based inclusion complexation as functional nanomaterials.

Decoration of homopolymer vesicles by antibacterial ultrafine silver nanoparticles

Silver nanoparticles have been successfully decorated on the poly(2-(2-ethoxyethoxy)ethyl acrylate) (PEEA) homopolymer vesicles, exhibiting good antibacterial activity against both Gram-positive and Gram-negative bacteria.

How does a tiny terminal alkynyl end group drive fully hydrophilic homopolymers to self-assemble into multicompartment vesicles and flower-like complex particles?

We report an unusual self-assembly behavior driven by a tiny terminal alkynyl end group in fully hydrophilic homopolymers which form multicompartment vesicles and flower-like nanoparticles in aqueous solution.