Refined crystal structure of beta-lactamase from Citrobacter freundii indicates a mechanism for beta-lactam hydrolysis

Developing bifunctional beta-lactamase molecules with built-in target-recognizing module for prodrug therapy: identification of Enterobacter Cloacae P99 cephalosporinase loops suitable for randomization and phage-display selection

This study was focused on developing catalytically active beta-lactamase enzyme molecules that have target-recognizing sites built within their scaffold. Using phage-display approach, nine libraries were constructed by inserting the randomized linear or cysteine-constrained heptapeptides in the five different loops on the outer surface of P99 beta-lactamase molecule. The pIII signal peptide of Sec-pathway was employed for a periplasmic translocation of the beta-lactamase fusion protein, which we found more efficient than the DsbA signal peptide of SRP-pathway. The randomized heptapeptide loops replaced native amino acids between positions (34)Y-(37)K, (238)M-(246)A, (275)N-(280)A, (305)A-(311)S, or (329)I-(334)I of the P99 beta-lactamase molecules for generating the loop-1 to -5 libraries, respectively. The diversity of each loop library was judged by counting the primary and beta-lactamase-active clones. The linear peptide inserts in the loop-2 library showed the maximum number of the beta-lactamase-active clones, followed by the loop-5, loop-3, and loop-4. The insertion of the cysteine-constrained loops exhibited a dramatic loss of the enzyme-active beta-lactamase clones. The complexity of the loop-2 linear library, as determined by the frequency and diversity of amino acid distributions in the randomized region, appears consistent with the standards of other types of phage display library systems. The selection of the loop-2 linear library on streptavidin protein as a test target identified several beta-lactamase clones that specifically bound to streptavidin. In conclusion, this study identified the suitability of the loop-2 of P99 beta-lactamase for constructing a phage-display library of the beta-lactamase enzyme-active molecules that can be selected against a target. This is an enabling step in our long-term goal of developing bifunctional beta-lactamase molecules against cancer-specific targets for enzyme prodrug therapy of cancer.

Directed evolution and structural characterization of a simvastatin synthase

Enzymes from natural product biosynthetic pathways are attractive candidates for creating tailored biocatalysts to produce semisynthetic pharmaceutical compounds. LovD is an acyltransferase that converts the inactive monacolin J acid (MJA) into the cholesterol-lowering lovastatin. LovD can also synthesize the blockbuster drug simvastatin using MJA and a synthetic alpha-dimethylbutyryl thioester, albeit with suboptimal properties as a biocatalyst. Here we used directed evolution to improve the properties of LovD toward semisynthesis of simvastatin. Mutants with improved catalytic efficiency, solubility, and thermal stability were obtained, with the best mutant displaying an approximately 11-fold increase in an Escherichia coli-based biocatalytic platform. To understand the structural basis of LovD enzymology, seven X-ray crystal structures were determined, including the parent LovD, an improved mutant G5, and G5 cocrystallized with ligands. Comparisons between the structures reveal that beneficial mutations stabilize the structure of G5 in a more compact conformation that is favorable for catalysis.

Three decades of beta-lactamase inhibitors

Since the introduction of penicillin, beta-lactam antibiotics have been the antimicrobial agents of choice. Unfortunately, the efficacy of these life-saving antibiotics is significantly threatened by bacterial beta-lactamases. beta-Lactamases are now responsible for resistance to penicillins, extended-spectrum cephalosporins, monobactams, and carbapenems. In order to overcome beta-lactamase-mediated resistance, beta-lactamase inhibitors (clavulanate, sulbactam, and tazobactam) were introduced into clinical practice. These inhibitors greatly enhance the efficacy of their partner beta-lactams (amoxicillin, ampicillin, piperacillin, and ticarcillin) in the treatment of serious Enterobacteriaceae and penicillin-resistant staphylococcal infections. However, selective pressure from excess antibiotic use accelerated the emergence of resistance to beta-lactam-beta-lactamase inhibitor combinations. Furthermore, the prevalence of clinically relevant beta-lactamases from other classes that are resistant to inhibition is rapidly increasing. There is an urgent need for effective inhibitors that can restore the activity of beta-lactams. Here, we review the catalytic mechanisms of each beta-lactamase class. We then discuss approaches for circumventing beta-lactamase-mediated resistance, including properties and characteristics of mechanism-based inactivators. We next highlight the mechanisms of action and salient clinical and microbiological features of beta-lactamase inhibitors. We also emphasize their therapeutic applications. We close by focusing on novel compounds and the chemical features of these agents that may contribute to a "second generation" of inhibitors. The goal for the next 3 decades will be to design inhibitors that will be effective for more than a single class of beta-lactamases.

Substituted aryl malonamates as new serine beta-lactamase substrates: structure-activity studies

A series of substituted aryl malonamates have been prepared. These compounds are analogues of aryl phenaceturates where the amido side chain has been replaced by a retro-amide. Like the phenaceturates, these compounds are substrates of typical class A and class C beta-lactamases, particularly of the latter, and of soluble DD-peptidases. The effect of substituents alpha to the ester carbonyl group on turnover by these enzymes is similar to that in the phenaceturates. On the other hand, N-alkylation of the side chain amide of malonamates, but not of phenaceturates, retains the susceptibility of the compounds to hydrolysis by beta-lactamases. This reactivity is not enhanced, however, by bridging the amide nitrogen and Calpha atoms. A phosphonate analogue of the malonamates was found to be an irreversible inhibitor of the beta-lactamases. These results, therefore, provide further evidence for the covalent access of compounds bearing retro-amide side chains to the active sites of beta-lactam-recognizing enzymes.

NMR dynamics of PSE-4 beta-lactamase: an interplay of ps-ns order and mus-ms motions in the active site

The backbone dynamics for the 29.5 kDa class A beta-lactamase PSE-4 is presented. This solution NMR study was performed using multiple field (15)N spin relaxation and amide exchange data in the EX2 regime. Analysis was carried out with the relax program and includes the Lipari-Szabo model-free approach. Showing similarity to the homologous enzyme TEM-1, PSE-4 is very rigid on the ps-ns timescale, although slower mus-ms motions are present for several residues; this is especially true near the active site. However, significant dynamics differences exist between the two homologs for several important residues. Moreover, our data support the presence of a motion of the Omega loop first detected using molecular dynamics simulations on TEM-1. Thus, class A beta-lactamases appear to be a class of highly ordered proteins on the ps-ns timescale despite their efficient catalytic activity and high plasticity toward several different beta-lactam antibiotics. Most importantly, catalytically relevant mus-ms motions are present in the active site, suggesting an important role in catalysis.

Re-examining the role of Lys67 in class C beta-lactamase catalysis

Lys67 is essential for the hydrolysis reaction mediated by class C beta-lactamases. Its exact catalytic role lies at the center of several different proposed reaction mechanisms, particularly for the deacylation step, and has been intensely debated. Whereas a conjugate base hypothesis postulates that a neutral Lys67 and Tyr150 act together to deprotonate the deacylating water, previous experiments on the K67R mutants of class C beta-lactamases suggested that the role of Lys67 in deacylation is mainly electrostatic, with only a 2- to 3-fold decrease in the rate of the mutant vs the wild type enzyme. Using the Class C beta-lactamase AmpC, we have reinvestigated the activity of this K67R mutant enzyme, using biochemical and structural studies. Both the rates of acylation and deacylation were affected in the AmpC K67R mutant, with a 61-fold decrease in k(cat), the deacylation rate. We have determined the structure of the K67R mutant by X-ray crystallography both in apo and transition state-analog complexed forms, and observed only minimal conformational changes in the catalytic residues relative to the wild type. These results suggest that the arginine side chain is unable to play the same catalytic role as Lys67 in either the acylation or deacylation reactions catalyzed by AmpC. Therefore, the activity of this mutant can not be used to discredit the conjugate base hypothesis as previously concluded, although the reaction catalyzed by the K67R mutant itself likely proceeds by an alternative mechanism. Indeed, a manifold of mechanisms may contribute to hydrolysis in class C beta-lactamases, depending on the enzyme (wt or mutant) and the substrate, explaining why different mutants and substrates seem to support different pathways. For the WT enzyme itself, the conjugate base mechanism may be well favored.

Mutation of the active site carboxy-lysine (K70) of OXA-1 beta-lactamase results in a deacylation-deficient enzyme

Class D beta-lactamases hydrolyze beta-lactam antibiotics by using an active site serine nucleophile to form a covalent acyl-enzyme intermediate and subsequently employ water to deacylate the beta-lactam and release product. Class D beta-lactamases are carboxylated on the epsilon-amino group of an active site lysine, with the resulting carbamate functional group serving as a general base. We discovered that substitutions of the active site serine and lysine in OXA-1 beta-lactamase, a monomeric class D enzyme, significantly disrupt catalytic turnover. Substitution of glycine for the nucleophilic serine (S67G) results in an enzyme that can still bind substrate but is unable to form a covalent acyl-enzyme intermediate. Substitution of the carboxylated lysine (K70), on the other hand, results in enzyme that can be acylated by substrate but is impaired with respect to deacylation. We employed the fluorescent penicillin BOCILLIN FL to show that three different substitutions for K70 (alanine, aspartate, and glutamate) lead to the accumulation of significant acyl-enzyme intermediate. Interestingly, BOCILLIN FL deacylation rates (t(1/2)) vary depending on the identity of the substituting residue, from approximately 60 min for K70A to undetectable deacylation for K70D. Tryptophan fluorescence spectroscopy was used to confirm that these results are applicable to natural (i.e., nonfluorescent) substrates. Deacylation by K70A, but not K70D or K70E, can be partially restored by the addition of short-chain carboxylic acid mimetics of the lysine carbamate. In conclusion, we establish the functional role of the carboxylated lysine in OXA-1 and highlight its specific role in acylation and deacylation.

Structure of AmpC beta-lactamase (AmpCD) from an Escherichia coli clinical isolate with a tripeptide deletion (Gly286-Ser287-Asp288) in the H10 helix

The X-ray crystal structure of AmpC beta-lactamase (AmpC(D)) with a tripeptide deletion (Gly286-Ser287-Asp288) produced by Escherichia coli HKY28, a ceftazidime-resistant strain, was determined at a resolution of 1.7 A. The structure of AmpC(D) suggests that the tripeptide deletion at positions 286-288 located in the H10 helix causes a structural change of the Asn289-Asn294 region from the alpha-helix present in the native AmpC beta-lactamase of E. coli to a loop structure, which results in a widening of the substrate-binding site.

A novel family VIII carboxylesterase derived from a leachate metagenome library exhibits promiscuous beta-lactamase activity on nitrocefin

The realization that majority of microbes are not amenable to cultivation as isolates under laboratory conditions has led to the culture-independent metagenomic approach as a novel technique for novel biocatalyst discovery. A leachate fosmid shotgun metagenome library was constructed and subsequently screened for esterolytic activities on a tributyrin agar medium. Nucleotide sequencing and translational analysis of an esterase-positive fosmid clone led to the identification of a 1,281 bp esterase gene (estC) encoding a protein (EstC) of 427 aa with translated molecular weight of 46.3 kDa. The EstC primary structure contained a signal leader peptide (29 aa), which could be cleaved to form a mature protein of 398 aa with molecular weight 43.3 kDa. Homology searches revealed that EstC belonged to the family VIII esterases, which exploit a serine residue within the S-x-x-K motif as a catalytic nucleophile. Substrate specificity studies showed that EstC prefers short to medium acyl chain length of p-nitrophenyl esters, a characteristic typical of "true" carboxylesterases. Moreover, EstC represents the first member of the family VIII esterases with a leader peptide and a detectable promiscuous beta-lactam hydrolytic activity. Site-directed mutagenesis studies also revealed that in addition to Ser103 and Lys106 residues, the Tyr219 residue also plays a catalytic role in EstC. The organic solvent stability and the specificity towards esters of tertiary alcohols linalyl acetate (3,7-dimethyl-1,6-octadien-3-yl acetate) make EstC potentially useful in biocatalysis.

Kinetics and mechanism of inhibition of a serine beta-lactamase by O-aryloxycarbonyl hydroxamates

The class C serine beta-lactamase of Enterobacter cloacae P99 is irreversibly inhibited by O-aryloxycarbonyl hydroxamates. A series of these new inhibitors has been prepared to investigate the kinetics and mechanism of the inactivation reaction. A pH-rate profile for the reaction indicated that the reactive form of the inhibitor is neutral rather than anionic. The reaction rate is enhanced by electron-withdrawing aryloxy substituents and by hydrophobic substitution on both aryloxy and hydroxamate groups. Kinetics studies show that the rates of loss of the two possible leaving groups, aryloxide and hydroxamate, are essentially the same as the rate of enzyme inactivation. Nucleophilic trapping experiments prove, however, that the aryl oxide is the first to leave. It is likely, therefore, that the rate-determining step of inactivation is the initial acylation reaction, most likely of the active site serine, yielding a hydroxamoyl-enzyme intermediate. This then partitions between hydrolysis and aminolysis by Lys 315, the latter to form an inactive, cross-linked active site. A previously described crystal structure of the inactivated enzyme shows a carbamate cross-link of Ser 64 and Lys 315. Structure-activity studies of the reported compounds suggest that they do not react at the enzyme active site in the same way as normal substrates. In particular, it appears that the initial acylation by these compounds does not involve the oxyanion hole, an unprecedented departure from known and presumed reactivity. Molecular modeling suggests that an alternative oxyanion hole may have been recruited, consisting of the side chain functional groups of Tyr 150 and Lys 315. Such an alternative mode of reaction may lead to the design of novel inhibitors.

A new family of cyanobacterial penicillin-binding proteins. A missing link in the evolution of class A beta-lactamases

It is largely accepted that serine beta-lactamases evolved from some ancestral DD-peptidases involved in the biosynthesis and maintenance of the bacterial peptidoglycan. DD-peptidases are also called penicillin-binding proteins (PBPs), since they form stable acyl-enzymes with beta-lactam antibiotics, such as penicillins. On the other hand, beta-lactamases react similarly with these antibiotics, but the acyl-enzymes are unstable and rapidly hydrolyzed. Besides, all known PBPs and beta-lactamases share very low sequence similarities, thus rendering it difficult to understand how a PBP could evolve into a beta-lactamase. In this study, we identified a new family of cyanobacterial PBPs featuring the highest sequence similarity with the most widespread class A beta-lactamases. Interestingly, the Omega-loop, which, in the beta-lactamases, carries an essential glutamate involved in the deacylation process, is six amino acids shorter and does not contain any glutamate residue. From this new family of proteins, we characterized PBP-A from Thermosynechococcus elongatus and discovered hydrolytic activity with synthetic thiolesters that are usually good substrates of DD-peptidases. Penicillin degradation pathways as well as acylation and deacylation rates are characteristic of PBPs. In a first attempt to generate beta-lactamase activity, a 90-fold increase in deacylation rate was obtained by introducing a glutamate in the shorter Omega-loop.

4-Substituted trinems as broad spectrum beta-lactamase inhibitors: structure-based design, synthesis, and biological activity

A wide variety of pathogens have acquired antimicrobial resistance as an inevitable evolutionary response to the extensive use of antibacterial agents. In particular, one of the most widely used antibiotic structural classes is the beta-lactams, in which the most common and the most efficient mechanism of bacterial resistance is the synthesis of beta-lactamases. Class C beta-lactamase enzymes are primarily cephalosporinases, mostly chromosomally encoded, and are inducible by exposure to some beta-lactam agents and resistant to inhibition by marketed beta-lactamase inhibitors. In an ongoing effort to alleviate this problem a series of novel 4-substituted trinems was designed and synthesized. Significant in vitro inhibitory activity was measured against the bacterial beta-lactamases of class C and additionally against class A. The lead compound LK-157 was shown to be a potent mechanism-based inactivator. Acylation of the active site Ser 64 of the class C enzyme beta-lactamase was observed in the solved crystal structures of two inhibitors complexes to AmpC enzyme from E. cloacae. Structure-activity relationships in the series reveal the importance of the trinem scaffold for inhibitory activity and the interesting potential of the series for further development.

Substrate deacylation mechanisms of serine-beta-lactamases

The substrate deacylation mechanisms of serine-beta-lactamases (classes A, C and D) were investigated by theoretical calculations. The deacylation of class A proceeds via four elementary reactions. The rate-determining process is the tetrahedral intermediate (TI) formation and the activation energy is 24.6 kcal/mol at the DFT level. The deacylation does not proceed only by Glu166, which acts as a general base, but Lys73 also participates in the reaction. The C3-carboxyl group of the substrate reduces the barrier height at the TI formation (substrate-assisted catalysis). In the case of class C, the deacylation consists of two elementary processes. The activation energy of the TI formation has been estimated to be 30.5 kcal/mol. Tyr150Oeta is stabilized in the deprotonated state in the acyl-enzyme complex and works as a general base. This situation can exist due to the interaction with two positively charged side chains of lysine (Lys67 and Lys315). The deacylation of class D also consists of two elementary reaction processes. The activation energy of the TI formation is ca. 30 kcal/mol. It is thought that the side chain of Lys70 is deprotonated and acts as a general base. When Lys70 is carbamylated, the activation energy is reduced to less than 20 kcal/mol. This suggests that the high hydrolysis activity of class D with carbamylated Lys70 is due to the reduction of activation energy for deacylation. From these results, it is concluded that the contribution of the lysine residue adjacent to the serine residue is indispensable for the enzymatic reactions by serine-beta-lactamases.

EstA from Arthrobacter nitroguajacolicus Rü61a, a Thermo- and Solvent-Tolerant Carboxylesterase Related to Class C β-Lactamases

The estA gene encoding a novel cytoplasmic carboxylesterase from Arthrobacter nitroguajacolicus Rü61a was expressed in Escherichia coli. Sequence analysis and secondary structure predictions suggested that EstA belongs to the family VIII esterases, which are related to class C beta-lactamases. The S-x-x-K motif that in beta-lactamases contains the catalytic nucleophile, and a putative active-site tyrosine residue are conserved in EstA. The native molecular mass of hexahistidine-tagged (His6) EstA, purified by metal chelate affinity chromatography, was estimated to be 95 kDa by gel filtration, whereas the His6EstA peptide has a calculated molecular mass of 42.1 kDa. The enzyme catalyzes the hydrolysis of short-chain phenylacyl esters and triglycerides, and shows weak activity toward 2-hydroxy- and 2-nitroacetanilide. Its catalytic activity was inhibited by the serine-specific effector phenylmethylsulfonyl fluoride, and by Cd2+ and Hg2+ ions. Maximum activity of His6EstA was observed at a pH of 9.5 and a temperature of 50 degrees C to 60 degrees C. The enzyme was fairly thermostable. After 19 days at 50 degrees C and after 24 hours at 60 degrees C, its residual relative esterase activity toward phenylacetate was still 53% and 30%, respectively. Exposure of His6EstA to buffer-solvent mixtures showed that the enzyme was inactivated by several high log P (hydrophobic) solvents, whereas it showed remarkable stability and activity in up to 30% (by volume) of polar (low log P) organic solvents such as dimethylsulfoxide, methanol, acetonitrile, acetone, and propanol.

Structural basis for the extended substrate spectrum of CMY-10, a plasmid-encoded class C beta-lactamase

The emergence and dissemination of extended-spectrum (ES) beta-lactamases induce therapeutic failure and a lack of eradication of clinical isolates even by third-generation beta-lactam antibiotics like ceftazidime. CMY-10 is a plasmid-encoded class C beta-lactamase with a wide spectrum of substrates. Unlike the well-studied class C ES beta-lactamase from Enterobacter cloacae GC1, the Omega-loop does not affect the active site conformation and the catalytic activity of CMY-10. Instead, a three-amino-acid deletion in the R2-loop appears to be responsible for the ES activity of CMY-10. According to the crystal structure solved at 1.55 A resolution, the deletion significantly widens the R2 active site, which accommodates the R2 side-chains of beta-lactam antibiotics. This observation led us to demonstrate the hydrolysing activity of CMY-10 towards imipenem with a long R2 substituent. The forced mutational analyses of P99 beta-lactamase reveal that the introduction of deletion mutations into the R2-loop is able to extend the substrate spectrum of class C non-ES beta-lactamases, which is compatible with the isolation of natural class C ES enzymes harbouring deletion mutations in the R2-loop. Consequently, the opening of the R2 active site by the deletion of some residues in the R2-loop can be considered as an operative molecular strategy of class C beta-lactamases to extend their substrate spectrum.

Assessing the Protonation State of Drug Molecules: The Case of Aztreonam

Herein we examine the viability of physicochemical approaches based on standard computational chemistry tools to characterize the structure and energetics of flexible drug molecules with various titratable sites. We focus on the case of the monobactam antibiotic aztreonam, whose structure and physicochemical properties have been ascribed to several tautomeric forms, although it is still unclear which protonation states are responsible for its biological activity. First, we experimentally determined the pKa values for aztreonam over the pH range 0.8-7.0 using both 1H NMR and 13C NMR spectroscopy. Second, we carried out quantum chemical calculations on snapshots extracted from classical molecular dynamics simulations. Various levels of approximation were used in the energy calculations: ONIOM(HF/3-21G*:AMBER) for geometry relaxation, B3LYP/6-31+G** for electronic and electrostatic solvation energies, and molecular mechanics for attractive dispersion energy. The value of the free energy of solvation of a proton was treated as a parameter and chosen to give the best match between calculated and experimental pKa values for small molecules. Overall, this computational scheme can give satisfactory results in the pKa calculations for drug molecules.

The deacylation mechanism of AmpC beta-lactamase at ultrahigh resolution

Beta-lactamases confer bacterial resistance to beta-lactam antibiotics, such as penicillins. The characteristic class C beta-lactamase AmpC catalyzes the reaction with several key residues including Ser64, Tyr150, and Lys67. Here, we describe a 1.07 A X-ray crystallographic structure of AmpC beta-lactamase in complex with a boronic acid deacylation transition-state analogue. The high quality of the electron density map allows the determination of many proton positions. The proton on the Tyr150 hydroxyl group is clearly visible and is donated to the boronic oxygen mimicking the deacylation water. Meanwhile, Lys67 hydrogen bonds with Ser64Ogamma, Asn152Odelta1, and the backbone oxygen of Ala220. This suggests that this residue is positively charged and has relinquished the hydrogen bond with Tyr150 observed in acyl-enzyme complex structures. Together with previous biochemical and NMR studies, these observations indicate that Tyr150 is protonated throughout the reaction coordinate, disfavoring mechanisms that involve a stable tyrosinate as the general base for deacylation. Rather, the hydroxyl of Tyr150 appears to be well positioned to electrostatically stabilize the negative charge buildup in the tetrahedral high-energy intermediate. This structure, in itself, appears consistent with a mechanism involving either Tyr150 acting as a transient catalytic base in conjunction with a neutral Lys67 or the lactam nitrogen as the general base. Whereas mutagenesis studies suggest that Lys67 may be replaced by an arginine, disfavoring the conjugate base mechanism, distinguishing between these two hypotheses may ultimately depend on direct determination of the pK(a) of Lys67 along the reaction coordinate.

Different transition-state structures for the reactions of beta-lactams and analogous beta-sultams with serine beta-lactamases

Beta-sultams are the sulfonyl analogues of beta-lactams, and N-acyl beta-sultams are novel inactivators of the class C beta-lactamase of Enterobacter cloacae P99. They sulfonylate the active site serine residue to form a sulfonate ester which subsequently undergoes C-O bond fission and formation of a dehydroalanine residue by elimination of the sulfonate anion as shown by electrospray ionization mass spectroscopy. The analogous N-acyl beta-lactams are substrates for beta-lactamase and undergo enzyme-catalyzed hydrolysis presumably by the normal acylation-deacylation process. The rates of acylation of the enzyme by the beta-lactams, measured by the second-order rate constant for hydrolysis, kcat/K(m), and those of sulfonylation by the beta-sultams, measured by the second-order rate constant for inactivation, k(i), both show a similar pH dependence to that exhibited by the beta-lactamase-catalyzed hydrolysis of beta-lactam antibiotics. Electron-withdrawing groups in the aryl residue of the leaving group of N-aroyl beta-lactams increase the rate of alkaline hydrolysis and give a Bronsted beta(lg) of -0.55, indicative of a late transition state for rate-limiting formation of the tetrahedral intermediate. Interestingly, the corresponding Bronsted beta(lg) for the beta-lactamase-catalyzed hydrolysis of the same substrates is -0.06, indicative of an earlier transition state for the enzyme-catalyzed reaction. By contrast, although the Bronsted beta(lg) for the alkaline hydrolysis of N-aroyl beta-sultams is -0.73, similar to that for the beta-lactams, that for the sulfonylation of beta-lactamase by these compounds is -1.46, compatible with significant amide anion expulsion/S-N fission in the transition state. In this case, the enzyme reaction displays a later transition state compared with hydroxide-ion-catalyzed hydrolysis of the beta-sultam.

Inverse acyl phosph(on)ates: substrates or inhibitors of beta-lactam-recognizing enzymes?

Acyl phosph(on)ates represent a new class of inhibitors of beta-lactam-recognizing enzymes. Previously described members of this class were aroyl phosph(on)ates. These compounds have been shown to acylate and/or phosphylate the active site serine residue, leading to either transient or essentially irreversible inhibition [Li, N., and Pratt, R. F. (1998) J. Am. Chem. Soc.120, 4264-4268]. The present paper describes the synthesis and evaluation as inhibitors of an inverse pair of acyl phosph(on)ates that incorporate the amido side chain that represents a major substrate specificity determinant of these enzymes. Thus, N-(phenylacetyl)glycyl phenyl phosphate and benzoyl N-(benzyloxycarbonyl)aminomethyl phosphonate were prepared. The former of these compounds was found to be a substrate of typical class A and C beta-lactamases and of the DD-peptidase of Streptomyces R61; it thus acylates the active site serine. In contrast, the latter compound was an irreversible inhibitor of the above enzymes, probably by phosphonylation of the active site serine. With each of these enzymes therefore, the amido side chain rather than the acyl group dictates the orientation of the bound phosph(on)ate and thus the mode of reaction.

Understanding the longevity of the beta-lactam antibiotics and of antibiotic/beta-lactamase inhibitor combinations

Microbial resistance necessitates the search for new targets and new antibiotics. However, it is likely that resistance problems will eventually threaten these new products and it may, therefore, be instructive to review the successful employment of beta-lactam antibiotic/beta-lactamase inhibitor combinations to combat penicillin resistance. These combination drugs have proven successful for more than two decades, with inhibitor resistance still being relatively rare. The beta-lactamase inhibitors are mechanism-based irreversible inactivators. The ability of the inhibitors to avoid resistance may be due to the structural similarities between the substrate and inhibitor.

Molecular mechanisms of antibiotic resistance: QM/MM modelling of deacylation in a class A beta-lactamase

Modelling of the first step of the deacylation reaction of benzylpenicillin in the E. coli TEM1 beta-lactamase (with B3LYP/6-31G + (d)//AM1-CHARMM22 quantum mechanics/molecular mechanics methods) shows that a mechanism in which Glu166 acts as the base to deprotonate a conserved water molecule is both energetically and structurally consistent with experimental data; the results may assist the design of new antibiotics and beta-lactamase inhibitors.

Titration behavior of residues at the entrance of the D-pathway of cytochrome c oxidase from paracoccus denitrificans investigated by continuum electrostatic calculations

Continuum electrostatic calculations were employed to investigate the titration curves of the fully oxidized state of wild type and several variants of cytochrome c oxidase from Paracoccus denitrificans (N131D, N131C, N131V, and D124N) for different values of the dielectric constant of the protein. The effects of the mutations at the entrance of the D-proton transfer pathway were found to be quite localized to their immediate surroundings. The results can be well interpreted in the light of the available biochemical and structural data and help understanding the effects of mutations on proton conductivity. The mutations of aspartic acid Asp-I-124 to a neutral residue resulted in a decreased pK(a) value of His-I-28 suggesting that the mutation of His-I-28 may have a significant influence on the coupling of electron and proton transfer in cytochrome c oxidase. We also investigated the effect of the mutations N131D, N131C, and N131V on the residue Glu-I-278 in terms of its pK(a) value and electrostatic interaction energies.

A Theoretical Study on the Substrate Deacylation Mechanism of Class C β-Lactamase

The whole reaction of the deacylation of class C beta-lactamase was investigated by performing quantum chemical calculations under physiological conditions. In this study, the X-ray crystallographic structure of the inhibitor moxalactam-bound class C beta-lactamase (Patera et al. J. Am. Chem. Soc. 2000, 122, 10504-10512.) was utilized and moxalactam was changed into the substrate cefaclor. A model for quantum chemical calculations was constructed using an energy-minimized structure of the substrate-bound enzyme obtained by molecular mechanics calculation, in which the enzyme was soaked in thousands of TIP3P water molecules. It was found that the deacylation reaction consisted of two elementary processes. The first process was formation of a tetrahedral intermediate, which was initiated by the activation of catalytic water by Tyr150, and the second process was detachment of the hydroxylated substrate from the enzyme, which associated with proton transfer from the side chain of Lys67 to Ser64O(gamma). The first process is a rate-determining process, and the activation energy was estimated to be 30.47 kcal/mol from density functional theory calculations considering electron correlation (B3LYP/6-31G**). The side chain of Tyr150 was initially in a deprotonated state and was stably present in the active site of the acyl-enzyme complex, being held by Lys67 and Lys315 cooperatively.

Molecular Modeling ofHenry-Michaelis and Acyl-Enzyme Complexes between Imipenem andEnterobacter cloacae P99β-Lactamase

We report a molecular-mechanics (AMBER*) study on the Henry-Michaelis complex and the corresponding acyl-enzyme adduct formed between imipenem (1), a transient inhibitor of beta-lactamases, and Enterobacter cloacae P99, a class C-beta-lactamase. We have examined the influence of the structural configuration of the functional groups in the substrate on their three-dimensional (3D) arrangement at the active site, which was compared with those adopted by typical penicillins and cephalosporins. Our results confirm that the carboxy group of the antibiotic plays a prominent role in the binding of the substrate to the active site, and that it activates Ser64 through interaction with the phenolic OH group of Tyr150. The binding of imipenem to E. cloacae P99 increases the distance between Tyr150 and Ser64 due to the presence of a hydrophobic Me group in the (R)-1-hydroxyethyl substituent at C(6). This, together with the 3D arrangement of its carboxy group, leads to an interaction with the active site in a manner that hinders H+ exchange between the nucleophile in Ser64 and its basic activator, the phenolic group of Tyr150.

Molecular Modeling and Chemical Reactivity of Sanfetrinem and Derivatives

The indiscriminate use of beta-lactams has considerably diminished their efficiency as a result of bacteria developing effective defense mechanisms against them. Recent pharmaceutical research has led to the synthesis of tricyclic beta-lactam antibiotics known as "tricyclic carbapenems" or "trinems". In this work, we studied the chemical reactivity, an essential property for antibiotic action, of trinems and found it to be similar to that of cephalosporins. Also, we elucidated the interaction pattern for sanfetrinem and 4beta-methoxy trinem and compared it to that for classical beta-lactams. The behavior of both trinems was found to be similar to that of penicillin G toward Staphylococcus aureus PC1, and that of cephalothin and imipenem toward Enterobacter cloacae P99.

Mechanisms of Antibiotic Resistance: QM/MM Modeling of the Acylation Reaction of a Class A β-Lactamase with Benzylpenicillin

Understanding the mechanisms by which beta-lactamases destroy beta-lactam antibiotics is potentially vital in developing effective therapies to overcome bacterial antibiotic resistance. Class A beta-lactamases are the most important and common type of these enzymes. A key process in the reaction mechanism of class A beta-lactamases is the acylation of the active site serine by the antibiotic. We have modeled the complete mechanism of acylation with benzylpenicillin, using a combined quantum mechanical and molecular mechanical (QM/MM) method (B3LYP/6-31G+(d)//AM1-CHARMM22). All active site residues directly involved in the reaction, and the substrate, were treated at the QM level, with reaction energies calculated at the hybrid density functional (B3LYP/6-31+Gd) level. Structures and interactions with the protein were modeled by the AM1-CHARMM22 QM/MM approach. Alternative reaction coordinates and mechanisms have been tested by calculating a number of potential energy surfaces for each step of the acylation mechanism. The results support a mechanism in which Glu166 acts as the general base. Glu166 deprotonates an intervening conserved water molecule, which in turn activates Ser70 for nucleophilic attack on the antibiotic. This formation of the tetrahedral intermediate is calculated to have the highest barrier of the chemical steps in acylation. Subsequently, the acylenzyme is formed with Ser130 as the proton donor to the antibiotic thiazolidine ring, and Lys73 as a proton shuttle residue. The presented mechanism is both structurally and energetically consistent with experimental data. The QM/MM energy barrier (B3LYP/ 6-31G+(d)//AM1-CHARMM22) for the enzymatic reaction of 9 kcal mol(-1) is consistent with the experimental activation energy of about 12 kcal mol(-1). The effects of essential catalytic residues have been investigated by decomposition analysis. The results demonstrate the importance of the "oxyanion hole" in stabilizing the transition state and the tetrahedral intermediate. In addition, Asn132 and a number of charged residues in the active site have been identified as being central to the stabilizing effect of the enzyme. These results will be potentially useful in the development of stable beta-lactam antibiotics and for the design of new inhibitors.

Structure−Activity Relationship of 6-Methylidene Penems Bearing Tricyclic Heterocycles as Broad-Spectrum β-Lactamase Inhibitors: Crystallographic Structures Show Unexpected Binding of 1,4-Thiazepine Intermediates

The design and synthesis of a series of seven tricyclic 6-methylidene penems as novel class A and C serine beta-lactamase inhibitors is described. These compounds proved to be very potent inhibitors of the TEM-1 and AmpC beta-lactamases and less so against the class B metallo-beta-lactamase CcrA. In combination with piperacillin, their in vitro activities enhanced susceptibility of all class C resistant strains from various bacteria. Crystallographic structures of a serine-bound reaction intermediate of 17 with the class A SHV-1 and class C GC1 enzymes have been established to resolutions of 2.0 and 1.4 A, respectively, and refined to R-factors equal 0.163 and 0.145. In both beta-lactamases, a seven-membered 1,4-thiazepine ring has formed. The stereogenic C7 atom in the ring has the R configuration in the SHV-1 intermediate and has both R and S configurations in the GC1 intermediate. Hydrophobic stacking interactions between the tricyclic C7 substituent and a tyrosine side chain, rather than electrostatic or hydrogen bonding by the C3 carboxylic acid group, dominate in both complexes. The formation of the 1,4- thiazepine ring structures is proposed based on a 7-endo-trig cyclization.

Crystal Structures of the Apo and Penicillin-acylated Forms of the BlaR1 β-Lactam Sensor of Staphylococcus aureus

Staphylococcus aureus is among the most prevalent and antibiotic-resistant of pathogenic bacteria. The resistance of S. aureus to prototypal beta-lactam antibiotics is conferred by two mechanisms: (i) secretion of hydrolytic beta-lactamase enzymes and (ii) production of beta-lactam-insensitive penicillin-binding proteins (PBP2a). Despite their distinct modes of resistance, expression of these proteins is controlled by similar regulation systems, including a repressor (BlaI/MecI) and a multidomain transmembrane receptor (BlaR1/MecR1). Resistance is triggered in response to a covalent binding event between a beta-lactam antibiotic and the extracellular sensor domain of BlaR1/MecR1 by transduction of the binding signal to an intracellular protease domain capable of repressor inactivation. This study describes the first crystal structures of the sensor domain of BlaR1 (BlaRS) from S. aureus in both the apo and penicillin-acylated forms. The structures show that the sensor domain resembles the beta-lactam-hydrolyzing class D beta-lactamases, but is rendered a penicillin-binding protein due to the formation of a very stable acyl-enzyme. Surprisingly, conformational changes upon penicillin binding were not observed in our structures, supporting the hypothesis that transduction of the antibiotic-binding signal into the cytosol is mediated by additional intramolecular interactions of the sensor domain with an adjacent extracellular loop in BlaR1.

Novel mechanism of inhibiting beta-lactamases by sulfonylation using beta-sultams

Beta-sultams are the sulfonyl analogues of beta-lactams and N-acyl beta-sultams are novel inactivators of the class C beta-lactamase of Enterobacter cloacae P99. The rates of inactivation show a similar pH-rate dependence as that exhibited by the beta-lactam antibiotics and with ESIMS data it is suggested that beta-sultams sulfonylate the active site serine residue to form a sulfonate ester.

Mixed Quantum Mechanical/Molecular Mechanical (QM/MM) Study of the Deacylation Reaction in a Penicillin Binding Protein (PBP) versus in a Class C β-Lactamase

The origin of the substantial difference in deacylation rates for acyl-enzyme intermediates in penicillin-binding proteins (PBPs) and beta-lactamases has remained an unsolved puzzle whose solution is of great importance to understanding bacterial antibiotic resistance. In this work, accurate, large-scale mixed ab initio quantum mechanical/molecular mechanical (QM/MM) calculations have been used to study the hydrolysis of acyl-enzyme intermediates formed between cephalothin and the dd-peptidase of Streptomyces sp. R61, a PBP, and the Enterobacter cloacae P99 cephalosporinase, a class C beta-lactamase. Qualitative and, in the case of P99, quantitative agreement was achieved with experimental kinetics. The faster rate of deacylation in the beta-lactamase is attributed to a more favorable electrostatic environment around Tyr150 in P99 (as compared to that for Tyr159 in R61) which facilitates this residue's function as the general base. This is found to be in large part accomplished by the ability of P99 to covalently bind the ligand without concurrent elimination of hydrogen bonds to Tyr150, which proves not to be the case with Tyr159 in R61. This work provides an essential foundation for further work in this area, such as selecting mutations capable of converting the PBP into a beta-lactamase.

Hydrolysis of third-generation cephalosporins by class C beta-lactamases. Structures of a transition state analog of cefotoxamine in wild-type and extended spectrum enzymes

Bacterial resistance to the third-generation cephalosporins is an issue of great concern in current antibiotic therapeutics. An important source of this resistance is from production of extended-spectrum (ES) beta-lactamases by bacteria. The Enterobacter cloacae GC1 enzyme is an example of a class C ES beta-lactamase. Unlike wild-type (WT) forms, such as the E. cloacae P99 and Citrobacter freundii enzymes, the ES GC1 beta-lactamase is able to rapidly hydrolyze third-generation cephalosporins such as cefotaxime and ceftazidime. To understand the basis for this ES activity, m-nitrophenyl 2-(2-aminothiazol-4-yl)-2-[(Z)-methoxyimino]acetylaminomethyl phosphonate has been synthesized and characterized. This phosphonate was designed to generate a transition state analog for turnover of cefotaxime. The crystal structures of complexes of the phosphonate with both ES GC1 and WT C. freundii GN346 beta-lactamases have been determined to high resolution (1.4-1.5 Angstroms). The serine-bound analog of the tetrahedral transition state for deacylation exhibits a very different binding geometry in each enzyme. In the WT beta-lactamase the cefotaxime-like side chain is crowded against the Omega loop and must protrude from the binding site with its methyloxime branch exposed. In the ES enzyme, a mutated Omega loop adopts an alternate conformation allowing the side chain to be much more buried. During the binding and turnover of the cefotaxime substrate by this ES enzyme, it is proposed that ligand-protein contacts and intra-ligand contacts are considerably relieved relative to WT, facilitating positioning and activation of the hydrolytic water molecule. The ES beta-lactamase is thus able to efficiently inactivate third-generation cephalosporins.

Crystal Structure of Wild-type Penicillin-binding Protein 5 from Escherichia coli

Penicillin-binding protein 5 (PBP 5) of Escherichia coli functions as a d-alanine carboxypeptidase (CPase), cleaving d-alanine from the C terminus of cell wall peptides. Like all PBPs, PBP 5 forms a covalent acyl-enzyme complex with beta-lactam antibiotics; however, PBP 5 is distinguished by its high rate of deacylation of the acylenzyme complex (t(1/2) approximately 10 min). A Gly105 --> Asp mutation in PBP 5 markedly impairs deacylation with only minor effects on acylation, and abolishes CPase activity. We have determined the three-dimensional structure of a soluble form of wild-type PBP 5 at 1.85-A resolution and have also refined the structure of the G105D mutant form of PBP 5 to 1.9-A resolution. Comparison of the two structures reveals that the major effect of the mutation is to disorder a loop comprising residues 74-90 that sits atop the SXN motif of the active site. Deletion of the 74-90 loop in wild-type PBP 5 markedly diminished the deacylation rate of penicillin G with a minimal impact on acylation, and abolished CPase activity. These effects were very similar to those observed in the G105D mutant, reinforcing the idea that this mutation causes disordering of the 74-90 loop. Mutation of two consecutive serines within this loop, which hydrogen bond to Ser110 and Asn112 in the SXN motif, had marked effects on CPase activity, but not beta-lactam antibiotic binding or hydrolysis. These data suggest a direct role for the SXN motif in deacylation of the acyl-enzyme complex and imply that the functioning of this motif is modulated by the 74-90 loop.

Identification of residues critical for catalysis in a class C beta-lactamase by combinatorial scanning mutagenesis

Despite their clinical importance, the mechanism of action of the class C beta-lactamases is poorly understood. In contrast to the class A and class D beta-lactamases, which contain a glutamate residue and a carbamylated lysine in their respective active sites that are thought to serve as general base catalysts for beta-lactam hydrolysis, the mechanism of activation of the serine and water nucleophiles in the class C enzymes is unclear. To probe for residues involved in catalysis, the class C beta-lactamase from Enterobacter cloacae P99 was studied by combinatorial scanning mutagenesis at 122 positions in and around the active site. Over 1000 P99 variants were screened for activity in a high-throughput in vivo antibiotic resistance assay and sequenced by 96-capillary electrophoresis to identify residues that are important for catalysis. P99 mutants showing reduced capability to convey antibiotic resistance were purified and characterized in vitro. The screen identified an active-site hydrogen-bonding network that is key to catalysis. A second cluster of residues was identified that likely plays a structural role in the enzyme. Otherwise, residues not directly contacting the substrate showed tolerance to substitution. The study lends support to the notion that the class C beta-lactamases do not have a single residue that acts as the catalytic general base. Rather, catalysis is affected by a hydrogen-bonding network in the active site, suggesting a possible charge relay system.

pKa measurements from nuclear magnetic resonance of tyrosine-150 in class C beta-lactamase

13C-NMR spectroscopy was used to estimate the p K a values for the Tyr(150) (Y150) residue in wild-type and mutant class C beta-lactamases. The tyrosine residues of the wild-type and mutant lactamases were replaced with (13)C-labelled L-tyrosine ([ phenol -4-(13)C]tyrosine) in order to observe the tyrosine residues selectively. Spectra of the wild-type and K67C mutant (Lys(67)-->Cys) enzyme were compared with the Y150C mutant lactamase spectra to identify the signal originating from Tyr(150). Titration experiments showed that the chemical shift of the Tyr(150) resonance in the wild-type enzyme is almost invariant in a range of 0.1 p.p.m. up to pH 11 and showed that the p K (a) of this residue is well above 11 in the substrate-free form. According to solvent accessibility calculations on X-ray-derived structures, the phenolic oxygen of Tyr(150), which is near the amino groups of Lys(315) and Lys(67), appears to have low solvent accessibility. These results suggest that, in the native enzyme, Tyr(150) in class C beta-lactamase of Citrobacter freundii GN346 is protonated and that when Tyr(150) loses a proton, a proton from Lys(67) would replace it. Consequently, Tyr(150) would be protonated during the entire titration.

Membrane localization of the ToxR winged-helix domain is required for TcpP-mediated virulence gene activation in Vibrio cholerae

ToxR is a bitopic membrane protein that controls virulence gene expression in Vibrio cholerae. Its cytoplasmic domain is homologous to the winged helix-turn-helix ('winged helix') DNA-binding/transcription activation domain found in a variety of prokaryotic and eukaryotic regulators, whereas its periplasmic domain is of ill-defined function. Several genes in V. cholerae are regulated by ToxR, but by apparently different mechanisms. Whereas ToxR directly controls the transcription of genes encoding two outer membrane proteins, OmpU and OmpT, it co-operates with a second membrane-localized transcription factor called TcpP to activate transcription of the gene encoding ToxT, which regulates transcription of cholera toxin (ctxAB) and the toxin-co-regulated pilus (tcp). To determine the requirements for gene activation by ToxR, different domains of the protein were analysed for their ability to control expression of toxT, ompU and ompT. Soluble forms of the cytoplasmic winged-helix domain regulated ompU and ompT gene expression properly but did not activate toxT transcription. Membrane localization of the winged helix was sufficient for both omp gene regulation and TcpP-dependent toxT transcription, irrespective of the type of periplasmic domain or even the presence of a periplasmic domain. These results suggest that (i) the major function for membrane localization of ToxR is for its winged-helix domain to co-operate with TcpP to activate transcription; (ii) the periplasmic domain of ToxR is not required for TcpP-dependent activation of toxT transcription; and (iii) membrane localization is not a strict requirement for DNA binding and transcription activation by ToxR.

Nanomolar inhibitors of AmpC beta-lactamase

beta-lactamases are the most widespread resistance mechanism to beta-lactam antibiotics, such as the penicillins and the cephalosporins. In an effort to combat these enzymes, a combination of stereoselective organic synthesis, enzymology, microbiology, and X-ray crystallography was used to design and evaluate new carboxyphenyl-glycylboronic acid transition-state analogue inhibitors of the class C beta-lactamase AmpC. The new compounds improve inhibition by over 2 orders of magnitude compared to analogous glycylboronic acids, with K(i) values as low as 1 nM. On the basis of the differential binding of different analogues, the introduced carboxylate alone contributes about 2.1 kcal/mol in affinity. This carboxylate corresponds to the ubiquitous C3(4)' carboxylate of beta-lactams, and this energy represents the first thermodynamic measurement of the importance of this group in molecular recognition by class C beta-lactamases. The structures of AmpC in complex with two of these inhibitors were determined by X-ray crystallography at 1.72 and 1.83 A resolution. These structures suggest a structural basis for the high affinity of the new compounds and provide templates for further design. The highest affinity inhibitor was 5 orders of magnitude more selective for AmpC than for characteristic serine proteases, such as chymotrypsin. This inhibitor reversed the resistance of clinical pathogens to the third generation cephalosporin ceftazidime; it may serve as a lead compound for drug discovery to combat bacterial resistance to beta-lactam antibiotics.

Biochemistry and comparative genomics of SxxK superfamily acyltransferases offer a clue to the mycobacterial paradox: presence of penicillin-susceptible target proteins versus lack of efficiency of penicillin as therapeutic agent

The bacterial acyltransferases of the SxxK superfamily vary enormously in sequence and function, with conservation of particular amino acid groups and all-alpha and alpha/beta folds. They occur as independent entities (free-standing polypeptides) and as modules linked to other polypeptides (protein fusions). They can be classified into three groups. The group I SxxK D,D-acyltransferases are ubiquitous in the bacterial world. They invariably bear the motifs SxxK, SxN(D), and KT(S)G. Anchored in the plasma membrane with the bulk of the polypeptide chain exposed on the outer face of it, they are implicated in the synthesis of wall peptidoglycans of the most frequently encountered (4-->3) type. They are inactivated by penicillin and other beta-lactam antibiotics acting as suicide carbonyl donors in the form of penicillin-binding proteins (PBPs). They are components of a morphogenetic apparatus which, as a whole, controls multiple parameters such as shape and size and allows the bacterial cells to enlarge and duplicate their particular pattern. Class A PBP fusions comprise a glycosyltransferase module fused to an SxxK acyltransferase of class A. Class B PBP fusions comprise a linker, i.e., protein recognition, module fused to an SxxK acyltransferase of class B. They ensure the remodeling of the (4-->3) peptidoglycans in a cell cycle-dependent manner. The free-standing PBPs hydrolyze D,D peptide bonds. The group II SxxK acyltransferases frequently have a partially modified bar code, but the SxxK motif is invariant. They react with penicillin in various ways and illustrate the great plasticity of the catalytic centers. The secreted free-standing PBPs, the serine beta-lactamases, and the penicillin sensors of several penicillin sensory transducers help the D,D-acyltransferases of group I escape penicillin action. The group III SxxK acyltransferases are indistinguishable from the PBP fusion proteins of group I in motifs and membrane topology, but they resist penicillin. They are referred to as Pen(r) protein fusions. Plausible hypotheses are put forward on the roles that the Pen(r) protein fusions, acting as L,D-acyltransferases, may play in the (3-->3) peptidoglycan-synthesizing molecular machines. Shifting the wall peptidoglycan from the (4-->3) type to the (3-->3) type could help Mycobacterium tuberculosis and Mycobacterium leprae survive by making them penicillin resistant.

Structural basis for imipenem inhibition of class C beta-lactamases

To determine how imipenem inhibits the class C beta-lactamase AmpC, the X-ray crystal structure of the acyl-enzyme complex was determined to a resolution of 1.80 A. In the complex, the lactam carbonyl oxygen of imipenem has flipped by approximately 180 degrees compared to its expected position; the electrophilic acyl center is thus displaced from the point of hydrolytic attack. This conformation resembles that of imipenem bound to the class A enzyme TEM-1 but is different from that of moxalactam bound to AmpC.

pKa, MM, and QM studies of mechanisms of beta-lactamases and penicillin-binding proteins: acylation step

The acylation step of the catalytic mechanism of beta-lactamases and penicillin-binding proteins (PBPs) has been studied with various approaches. The methods applied range from molecular dynamics (MD) simulations to multiple titration calculations using the Poisson-Boltzmann approach to quantum mechanical (QM) methods. The mechanism of class A beta-lactamases was investigated in the greatest detail. Most approaches support the critical role of Glu-166 and hydrolytic water in the acylation step of the enzymatic catalysis in class A beta-lactamases. The details of the catalytic mechanism have been revealed by the QM approach, which clearly pointed out the critical role of Glu-166 acting as a general base in the acylation step with preferred substrates. Lys-73 shuffles a proton abstracted by Glu-166 O(epsilon ) to the beta-lactam nitrogen through Ser-130 hydroxyl. This proton is transferred from O(gamma) of the catalytic Ser-70 through the bridging hydrolytic water to Glu-166 O(epsilon ). Then the hydrogen is simultaneously passed through S(N)2 inversion mechanism at Lys-73 N(zeta) to Ser-130 O(gamma), which loses its proton to the beta-lactam nitrogen. The protonation of beta-lactam nitrogen proceeds with an immediate ring opening and collapse of the first tetrahedral species into an acyl-enzyme intermediate. However, the studies that considered the effect of solvation lower the barrier for the pathway, which utilizes Lys-73 as a general base, thus creating a possibility of multiple mechanisms for the acylation step in the class A beta-lactamases. These findings help explain the exceptional efficiency of these enzymes. They emphasize an important role of Glu-166, Lys-73, and Ser-130 for enzymatic catalysis and shed light on details of the acylation step of class A beta-lactamase mechanism. The acylation step for class C beta-lactamases and six classes of PBPs were also considered with continuum solvent models and MD simulations.

Using steric hindrance to design new inhibitors of class C beta-lactamases

beta-lactamases confer resistance to beta-lactam antibiotics such as penicillins and cephalosporins. However, beta-lactams that form an acyl-intermediate with the enzyme but subsequently are hindered from forming a catalytically competent conformation seem to be inhibitors of beta-lactamases. This inhibition may be imparted by specific groups on the ubiquitous R(1) side chain of beta-lactams, such as the 2-amino-4-thiazolyl methoxyimino (ATMO) group common among third-generation cephalosporins. Using steric hindrance of deacylation as a design guide, penicillin and carbacephem substrates were converted into effective beta-lactamase inhibitors and antiresistance antibiotics. To investigate the structural bases of inhibition, the crystal structures of the acyl-adducts of the penicillin substrate amoxicillin and the new analogous inhibitor ATMO-penicillin were determined. ATMO-penicillin binds in a catalytically incompetent conformation resembling that adopted by third-generation cephalosporins, demonstrating the transferability of such sterically hindered groups in inhibitor design.

Structural bases of stability-function tradeoffs in enzymes

The structures of enzymes reflect two tendencies that appear opposed. On one hand, they fold into compact, stable structures; on the other hand, they bind a ligand and catalyze a reaction. To be stable, enzymes fold to maximize favorable interactions, forming a tightly packed hydrophobic core, exposing hydrophilic groups, and optimizing intramolecular hydrogen-bonding. To be functional, enzymes carve out an active site for ligand binding, exposing hydrophobic surface area, clustering like charges, and providing unfulfilled hydrogen bond donors and acceptors. Using AmpC beta-lactamase, an enzyme that is well-characterized structurally and mechanistically, the relationship between enzyme stability and function was investigated by substituting key active-site residues and measuring the changes in stability and activity. Substitutions of catalytic residues Ser64, Lys67, Tyr150, Asn152, and Lys315 decrease the activity of the enzyme by 10(3)-10(5)-fold compared to wild-type. Concomitantly, many of these substitutions increase the stability of the enzyme significantly, by up to 4.7kcal/mol. To determine the structural origins of stabilization, the crystal structures of four mutant enzymes were determined to between 1.90A and 1.50A resolution. These structures revealed several mechanisms by which stability was increased, including mimicry of the substrate by the substituted residue (S64D), relief of steric strain (S64G), relief of electrostatic strain (K67Q), and improved polar complementarity (N152H). These results suggest that the preorganization of functionality characteristic of active sites has come at a considerable cost to enzyme stability. In proteins of unknown function, the presence of such destabilized regions may indicate the presence of a binding site.

Structure-based approach for binding site identification on AmpC beta-lactamase

Beta-lactamases are the most widespread resistance mechanism to beta-lactam antibiotics and are an increasing menace to public health. Several beta-lactamase structures have been determined, making this enzyme an attractive target for structure-based drug design. To facilitate inhibitor design for the class C beta-lactamase AmpC, binding site "hot spots" on the enzyme were identified using experimental and computational approaches. Experimentally, X-ray crystal structures of AmpC in complexes with four boronic acid inhibitors and a higher resolution (1.72 A) native apo structure were determined. Along with previously determined structures of AmpC in complexes with five other boronic acid inhibitors and four beta-lactams, consensus binding sites were identified. Computationally, the programs GRID, MCSS, and X-SITE were used to predict potential binding site hot spots on AmpC. Several consensus binding sites were identified from the crystal structures. An amide recognition site was identified by the interaction between the carbonyl oxygen in the R1 side chain of beta-lactams and the atom Ndelta2 of the conserved Asn152. Surprisingly, this site also recognizes the aryl rings of arylboronic acids, appearing to form quadrupole-dipole interactions with Asn152. The highly conserved "oxyanion" hole defines a site that recognizes both carbonyl and hydroxyl groups. A hydroxyl binding site was identified by the O2 hydroxyl in the boronic acids, which hydrogen bonds with Tyr150 and a conserved water. A hydrophobic site is formed by Leu119 and Leu293. A carboxylate binding site was identified by the ubiquitous C3(4) carboxylate of the beta-lactams, which interacts with Asn346 and Arg349. Four water sites were identified by ordered waters observed in most of the structures; these waters form extensive hydrogen-bonding networks with AmpC and occasionally the ligand. Predictions by the computational programs showed some correlation with the experimentally observed binding sites. Several sites were not predicted, but novel binding sites were suggested. Taken together, a map of binding site hot spots found on AmpC, along with information on the functionality recognized at each site, was constructed. This map may be useful for structure-based inhibitor design against AmpC.

Structure-based discovery of a novel, noncovalent inhibitor of AmpC beta-lactamase

beta-lactamases are the most widespread resistance mechanisms to beta-lactam antibiotics, and there is a pressing need for novel, non-beta-lactam drugs. A database of over 200,000 compounds was docked to the active site of AmpC beta-lactamase to identify potential inhibitors. Fifty-six compounds were tested, and three had K(i) values of 650 microM or better. The best of these, 3-[(4-chloroanilino)sulfonyl]thiophene-2-carboxylic acid, was a competitive noncovalent inhibitor (K(i) = 26 microM), which also reversed resistance to beta-lactams in bacteria expressing AmpC. The structure of AmpC in complex with this compound was determined by X-ray crystallography to 1.94 A and reveals that the inhibitor interacts with key active-site residues in sites targeted in the docking calculation. Indeed, the experimentally determined conformation of the inhibitor closely resembles the prediction. The structure of the enzyme-inhibitor complex presents an opportunity to improve binding affinity in a novel series of inhibitors discovered by structure-based methods.