Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)

Thermoelectric-Powered Sensors for Internet of Things

The Internet of Things (IoT) combines various sensors and the internet to form an expanded network, realizing the interconnection between human beings and machines anytime and anywhere. Nevertheless, the problem of energy supply limits the large-scale implementation of the IoT. Fortunately, thermoelectric generators (TEGs), which can directly convert thermal gradients into electricity, have attracted extensive attention in the IoT field due to their unique benefits, such as small sizes, long maintenance cycles, high stability, and no noise. Therefore, it is vital to integrate the significantly advanced research on TEGs into IoT. In this review, we first outline the basic principle of the thermoelectricity effect and summarize the common preparation methods for thermoelectric functional parts in TEGs. Then, we elaborate on the application of TEG-powered sensors in the human body, including wearable and implantable medical electronic devices. This is followed by a discussion on the application of scene sensors for IoTs, for example, building energy management and airliners. Finally, we provide a further outlook on the current challenges and opportunities.

Abnormal Seebeck Effect in Vertically Stacked 2D/2D PtSe2 /PtSe2 Homostructure

When a thermoelectric (TE) material is deposited with a secondary TE material, the total Seebeck coefficient of the stacked layer is generally represented by a parallel conductor model. Accordingly, when TE material layers of the same thickness are stacked vertically, the total Seebeck coefficient in the transverse direction may change in a single layer. Here, an abnormal Seebeck effect in a stacked two-dimensional (2D) PtSe2 /PtSe2 homostructure film, i.e., an extra in-plane Seebeck voltage is produced by wet-transfer stacking at the interface between the PtSe2 layers under a transverse temperature gradient is reported. This abnormal Seebeck effect is referred to as the interfacial Seebeck effect in stacked PtSe2 /PtSe2 homostructures. This effect is attributed to the carrier-interface interaction, and has independent characteristics in relation to carrier concentration. It is confirmed that the in-plane Seebeck coefficient increases as the number of stacked PtSe2 layers increase and observed a high Seebeck coefficient exceeding ≈188 µV K-1 at 300 K in a four-layer-stacked PtSe2 /PtSe2 homostructure.

From Brittle to Ductile: A Scalable and Tailorable All-Inorganic Semiconductor Foil through a Rolling Process toward Flexible Thermoelectric Modules

Inorganic thermoelectric (TE) materials with outstanding capacity for energy conversion are expected to be promising eco-friendly and renewable power sources, but they are always intrinsically brittle, restricting their development in flexible TE electronics. Therefore, we have developed a facile manufacturing method of large-scale all-inorganic silver chalcogenide foils and flexible TE generators in this work. A rolling process, as an effective and facile molding technique, is applied in ductile TE materials. The figure-of-merit for flexibility of this free-standing foil is in the range of 0.02-0.13, suggesting the superior flexibility of the all-inorganic TE foils. A high TE figure-of-merit ZT of 0.47 at room temperature is reached for Ag₂S_0.45Se_0.45Te_0.1, which is one of the most promising room-temperature ZTs among flexible TE materials. A proof-of-concept flexible TE generator based on silver chalcogenide foils achieves an open-circuit voltage of 1.19 mV and an output power density of 1.8 mW/m² with a temperature difference of 2.7 °C across the TE leg, showing great potential in heat-to-electricity conversion.

Hybrid Photovoltaic/Thermoelectric Systems for Round-the-Clock Energy Harvesting

Due to their emission-free operation and high efficiency, photovoltaic cells (PVCs) have been one of the candidates for next-generation “green” power generators. However, PVCs require prolonged exposure to sunlight to work, resulting in elevated temperatures and worsened performances. To overcome this shortcoming, photovoltaic–thermal collector (PVT) systems are used to cool down PVCs, leaving the waste heat unrecovered. Fortunately, the development of thermoelectric generators (TEGs) provides a way to directly convert temperature gradients into electricity. The PVC–TEG hybrid system not only solves the problem of overheated solar cells but also improves the overall power output. In this review, we first discuss the basic principle of PVCs and TEGs, as well as the principle and basic configuration of the hybrid system. Then, the optimization of the hybrid system, including internal and external aspects, is elaborated. Furthermore, we compare the economic evaluation and power output of PVC and hybrid systems. Finally, a further outlook on the hybrid system is offered.

Presynthetic Redox Gated Metal-to-Insulator Transition and Photothermoelectric Properties in Nickel Tetrathiafulvalene-Tetrathiolate Coordination Polymers

Photothermoelectric (PTE) materials are promising candidates for solar energy harvesting and photodetection applications, especially for near-infrared (NIR) wavelengths. Although the processability and tunability of organic materials are highly advantageous, examples of organic PTE materials are comparatively rare and their PTE performance is typically limited by poor photothermal (PT) conversion. Here, we report the use of redox-active Sn complexes of tetrathiafulvalene-tetrathiolate (TTFtt) as transmetalating agents for the synthesis of presynthetically redox tuned NiTTFtt materials. Unlike the neutral material NiTTFtt, which exhibits n-type glassy-metallic conductivity, the reduced materials Li_1.2Ni_0.4[NiTTFtt] and [Li(THF)_1.5]_1.2Ni_0.4[NiTTFtt] (THF = tetrahydrofuran) display physical characteristics more consistent with p-type semiconductors. The broad spectral absorption and electrically conducting nature of these TTFtt-based materials enable highly efficient NIR-thermal conversion and good PTE performance. Furthermore, in contrast to conventional PTE composites, these NiTTFtt coordination polymers are notable as single-component PTE materials. The presynthetically tuned metal-to-insulator transition in these NiTTFtt systems directly modulates their PT and PTE properties.

Intrinsically Self-Healable and Wearable All-Organic Thermoelectric Composite with High Electrical Conductivity for Heat Harvesting

The development of wearable electronics has led to the growing demand for the self-powered and maintenance-free power sources. Under these circumstances, thermoelectric generators are considered promising candidates, which can directly convert body heat into electricity to power wearable electronics. However, most of the thermoelectric materials are either brittle or unrecoverable under external physical damage. It is urgent to develop thermoelectric materials that possess both stretchability and intrinsic self-healing property, and the remaining challenge is to combine the high mechanical robustness and excellent electrical conductivity. Herein, a self-healing and wearable all-organic thermoelectric composite is reported. The composite film exhibits high electrical conductivity of 238 S cm^-1, high flexibility of up to 119% strain, and a maximum tensile strength of 23 MPa. When the composite film is subjected to external physical damage, most functionalities can be maintained after self-healing, 78% recovery in electrical conductivity, and 80% recovery in tensile strength. Using the self-healing composite, we fabricated a thermoelectric generator with a power output of 85.5 nW at a temperature difference of 48 K, which is a significant advance over the recently reported thermoelectric generators based on intrinsic self-healing thermoelectric materials. This work represents a crucial step toward achieving intrinsic self-healing all-organic thermoelectric materials with high electrical conductivity.

A Highly Conductive n-Type Coordination Complex with Thieno[3,2-b]thiophene Units: Facile Synthesis, Orientation, and Thermoelectric Properties

An organometallic nickel complex containing thieno[3,2-b]thiophene units was designed and synthesized. Composite films of the resulting nickel complex and polyvinylidene difluoride, which can be fabricated via a simple solution process under atmospheric conditions, exhibit remarkably high n-type conductivity (>200 S cm^-1). Moreover, the thermoelectric power factor of the n-type composite film was proven to be air stable. A grazing-incidence wide-angle X-ray diffraction analysis indicated a significant impact of introducing the thieno[3,2-b]thiophene core into the backbone of the nickel complex on the orientation within the composite films.

C. D, Karki B, Samatha K, Kim AA, Park M, Pant B. Advancements in MXene-Polymer Nanocomposites in Energy Storage and Biomedical Applications

MXenes are 2D ceramic materials, especially carbides, nitrides, and carbonitrides derived from their parent 'MAX' phases by the etching out of 'A' and are famous due to their conducting, hydrophilic, biocompatible, and tunable properties. However, they are hardly stable in the outer environment, have low biodegradability, and have difficulty in drug release, etc., which are overcome by MXene/Polymer nanocomposites. The MXenes terminations on MXene transferred to the polymer after composite formation makes it more functional. With this, there is an increment in photothermal conversion efficiency for cancer therapy, higher antibacterial activity, biosensors, selectivity, bone regeneration, etc. The hydrophilic surfaces become conducting in the metallic range after the composite formation. MXenes can effectively be mixed with other materials like ceramics, metals, and polymers in the form of nanocomposites to get improved properties suitable for advanced applications. In this paper, we review different properties like electrical and mechanical, including capacitances, dielectric losses, etc., of nanocomposites more than those like Ti3C2Tx/polymer, Ti3C2/UHMWPE, MXene/PVA-KOH, Ti3C2Tx/PVA, etc. along with their applications mainly in energy storing and biomedical fields. Further, we have tried to enlist the MXene-based nanocomposites and compare them with conducting polymers and other nanocomposites. The performance under the NIR absorption seems more effective. The MXene-based nanocomposites are more significant in most cases than other nanocomposites for the antimicrobial agent, anticancer activity, drug delivery, bio-imaging, biosensors, micro-supercapacitors, etc. The limitations of the nanocomposites, along with possible solutions, are mentioned.

Flexible thermoelectrics based on ductile semiconductors

Flexible thermoelectrics provide a different solution for developing portable and sustainable flexible power supplies. The discovery of silver sulfide-based ductile semiconductors has driven a shift in the potential for flexible thermoelectrics, but the lack of good p-type ductile thermoelectric materials has restricted the reality of fabricating conventional cross-plane π-shaped flexible devices. We report a series of high-performance p-type ductile thermoelectric materials based on the composition-performance phase diagram in AgCu(Se,S,Te) pseudoternary solid solutions, with high figure-of-merit values (0.45 at 300 kelvin and 0.68 at 340 kelvin) compared with other flexible thermoelectric materials. We further demonstrate thin and flexible π-shaped devices with a maximum normalized power density that reaches 30 μW cm^-2 K^-2. This output is promising for the use of flexible thermoelectrics in wearable electronics.

Engineering thermoelectric and mechanical properties by nanoporosity in calcium cobaltate films from reactions of Ca(OH)2/Co3O4 multilayers

Controlling nanoporosity to favorably alter multiple properties in layered crystalline inorganic thin films is a challenge. Here, we demonstrate that the thermoelectric and mechanical properties of Ca3Co4O9 films can be engineered through nanoporosity control by annealing multiple Ca(OH)2/Co3O4 reactant bilayers with characteristic bilayer thicknesses (b t ). Our results show that doubling b t , e.g., from 12 to 26 nm, more than triples the average pore size from ∼120 nm to ∼400 nm and increases the pore fraction from 3% to 17.1%. The higher porosity film exhibits not only a 50% higher electrical conductivity of σ ∼ 90 S cm-1 and a high Seebeck coefficient of α ∼ 135 μV K-1, but also a thermal conductivity as low as κ ∼ 0.87 W m-1 K-1. The nanoporous Ca3Co4O9 films exhibit greater mechanical compliance and resilience to bending than the bulk. These results indicate that annealing reactant multilayers with controlled thicknesses is an attractive way to engineer nanoporosity and realize mechanically flexible oxide-based thermoelectric materials.

Reversible color modulation of luminescent conjugated polymers based on a chemical redox mechanism and applications in rewritable paper and multiple information encryption

Reversible color modulation plays a key role in the field of information recording and encryption, but for the common colorful conjugated polymer materials, currently a convenient method to achieve their reversible color modulation is still lacking. Herein, six luminescent conjugated polymers P1 to P6 were successfully designed and synthesized, all of which could realize reversible color modulation through a similar reversible chemical redox behavior accompanied by reversible color and fluorescence changes. The same absorption spectral changes as those under electrochemical redox conditions strongly confirmed that these polymers underwent reversible redox reactions in the Fe³⁺ and H₂O system, which happened spontaneously according to the theoretical analysis of the reaction thermodynamics. Based on the reversible color modulation in the Fe³⁺ and H₂O system, polymers P1, P2 and P3, with different colors (yellow, orange and red) and fluorescence emissions, were successfully applied as rewritable paper with multi-color and multi-fluorescence printing as well as long-term recording capabilities. Meanwhile, polymers P1, P4, P5 and P6, which showed similar green fluorescence and yellow color but different oxidation potentials, were also introduced to accomplish multiple encryption and decryption of information, based on the step-by-step selective oxidation of the four polymers by adjusting the concentration of Fe³⁺.

Mechanically Flexible Thermoelectric Hybrid Thin Films by Introduction of PEDOT:PSS in Nanoporous Ca3Co4O9

Nanoporous Ca₃Co₄O₉ exhibits high thermoelectric properties and low thermal conductivity and can be made mechanically flexible by nanostructural design. To improve the mechanical flexibility with retained thermoelectric properties near room temperature, however, it is desirable to incorporate an organic filler in this nanoporous inorganic matrix material. Here, double-layer nanoporous Ca₃Co₄O₉/PEDOT:PSS thin films were synthesized by spin-coating PEDOT:PSS into the nanopores. The obtained hybrid films exhibit high Seebeck coefficient (∼+130 μV/K) and thermoelectric power factor (0.75 μW cm^-1 K^-2) at room temperature with no deterioration in electrical properties after cyclic bending tests (98% preservation of electrical conductivity after 1000 cycles bending to a bending radius of 3 mm). Compared with the nanoporous Ca₃Co₄O₉ thin film, the mechanical flexibility of the hybrid film can be effectively improved after hybrid with PEDOT:PSS with only a slight decrease of the thermoelectric properties.

Ultrahigh transverse thermoelectric power factor in flexible Weyl semimetal WTe2

Topological semimetals are well known for their interesting physical properties, while their mechanical properties have rarely received attention. With the increasing demand for flexible electronics, we explore the great potential of the van der Waals bonded Weyl semimetal WTe₂ for flexible thermoelectric applications. We find that WTe₂ single crystals have an ultrahigh Nernst power factor of ~3 Wm⁻¹K⁻², which outperforms the conventional Seebeck power factors of the state-of-the-art thermoelectric semiconductors by 2–3 orders of magnitude. A unique band structure that hosts compensated electrons and holes with extremely high mobilities is the primary mechanism for this huge Nernst power factor. Moreover, a large Ettingshausen signal of ~5 × 10⁻⁵ KA⁻¹m is observed at 23.1 K and 9 T. In this work, the combination of the exceptional Nernst–Ettingshausen performance and excellent mechanical transformative ability of WTe₂ would be instructive for flexible micro-/nano-thermoelectric devices.

Flexible thermoelectrics are of great interest with increasing demand of flexible and wearable electronics. Here, the authors demonstrate that the Weyl semimetal, WTe2, has a high Nernst power factor and great mechanical flexibility.

Iron(III) Dopant Counterions Affect the Charge-Transport Properties of Poly(Thiophene) and Poly(Dialkoxythiophene) Derivatives

This study investigates the charge-transport properties of poly(3-hexylthiophene-2,5-diyl) (P3HT) and poly(ProDOT-alt-biEDOT) (PE₂) films doped with a set of iron(III)-based dopants and as a function of dopant concentration. X-ray photoelectron spectroscopy measurements show that doping P3HT with 12 mM iron(III) solutions leads to similar extents of oxidation, independent of the dopant anion; however, the electrical conductivities and Seebeck coefficients vary significantly (5 S cm^-1 and + 82 μV K^-1 with tosylate and 56 S cm^-1 and +31 μV K^-1 with perchlorate). In contrast, PE₂ thermoelectric transport properties vary less with respect to the iron(III) anion chemistry, which is attributed to PE₂ having a lower onset of oxidation than P3HT. Consequentially, PE₂ doped with 12 mM iron(III) perchlorate obtained an electrical conductivity of 315 S cm^-1 and a Seebeck coefficient of + 7 μV K^-1. Modeling these thermoelectric properties with the semilocalized transport (SLoT) model suggests that tosylate-doped P3HT remains mostly in the localized transport regime, attributed to more disorder in the microstructure. In contrast perchlorate-doped P3HT and PE₂ films exhibited thermally deactivated electrical conductivities and metal-like transport at high doping levels over limited temperature ranges. Finally, the SLoT model suggests that PE₂ has the potential to be more electrically conductive than P3HT due to PE₂'s ability to achieve higher extents of oxidation and larger shifts in the reduced Fermi energy levels.

Bicyclic-ring base doping induces n-type conduction in carbon nanotubes with outstanding thermal stability in air

The preparation of air and thermally stable n-type carbon nanotubes is desirable for their further implementation in electronic and energy devices that rely on both p- and n-type material. Here, a series of guanidine and amidine bases with bicyclic-ring structures are used as n-doping reagents. Aided by their rigid alkyl functionality and stable conjugate acid structure, these organic superbases can easily reduce carbon nanotubes. n-Type nanotubes doped with guanidine bases show excellent thermal stability in air, lasting for more than 6 months at 100 °C. As an example of energy device, a thermoelectric p/n junction module is constructed with a power output of ca. 4.7 μW from a temperature difference of 40 °C.

Effect of heat treatment with different heat transfer modes on the polymerization of tosylate-doped poly(3,4-ethylenedioxythiophene) films

In this work, tosylate-doped poly(3,4-ethylenedioxythiophene) (PEDOT:Tos) films are prepared by thermally assisted oxidative polymerization either on a hot plate or in a convection oven. The main difference between these heat treatments is the way heat is transferred (conduction or convection) during polymerization. The surface morphology and structure, doped state, chemical composition, and the changes in the physical and chemical properties of the differently heat-treated films are analyzed using various instrumental methods. The hot plate-treated films exhibit a smooth and dense surface morphology with a low root-mean-square roughness of ~ 5 nm. The films have a quinoid-prevalent thiophene structure with a high electrical conductivity of 575 S/cm. By contrast, the oven-treated films show a rough and porous morphology with a surface roughness ranging from 30 to 80 nm depending on the scanning area, which yields high absorption capacity of more than 90% in the near-infrared range. The oven-treated films show a benzenoid-prevalent structure that provides relatively low electrical conductivity of 244 ± 45 S/cm. As a demonstration of these noticeable changes, PEDOT:Tos films are examined as a photothermal conversion layer to convert light energy to thermal energy, which is converted to electrical energy using a thermoelectric device by covering the films on the device.

Recent Advances and Prospects of Small Molecular Organic Thermoelectric Materials

Thermoelectric (TE) materials possess unique energy conversion capabilities between heat and electrical energy. Small organic semiconductors have aroused widespread attention for the fabrication of TE devices due to their advantages of low toxicity, large area, light weight, and easy fabrication. However, the low TE properties hinder their large-scale commercial application. Herein, the basic knowledge about TE materials, including parameters affecting the TE performance and the remaining challenges of the organic thermoelectric (OTE) materials, are initially summarized in detail. Second, the optimization strategies of power factor, including the selection and design of dopants and structural modification of the dope-host are introduced. Third, some achievements of p- and n-type small molecular OTE materials are highlighted to briefly provide their future developing trend; finally, insights on the future development of OTE materials are also provided in this study.

Challenges, Prospects, and Emerging Applications of Inkjet-Printed Electronics: A Chemist's Point of View

Driven by the development of new functional inks, inkjet-printed electronics has achieved several milestones upon moving from the integration of simple electronic elements (e.g., temperature and pressure sensors, RFID antennas, etc.) to high-tech applications (e.g. in optoelectronics, energy storage and harvesting, medical diagnosis). Currently, inkjet printing techniques are limited by spatial resolution higher than several micrometers, which sets a redhibitorythreshold for miniaturization and for many applications that require the controlled organization of constituents at the nanometer scale. In this Review, we present the physico-chemical concepts and the equipment constraints underpinning the resolution limit of inkjet printing and describe the contributions from molecular, supramolecular, and nanomaterials-based approaches for their circumvention. Based on these considerations, we propose future trajectories for improving inkjet-printing resolution that will be driven and supported by breakthroughs coming from chemistry. Please check all text carefully as extensive language polishing was necessary. Title ok? Yes.

DFT investigations of AgMC7H10N2 (M = Cl, Br, and I) metal organic molecules: NMR, optoelectronic, and transport properties

The full-potential linearized augmented plane wave (FP-LAPW) method was used for the calculation of the structural, nuclear magnetic resonance (NMR), optoelectronic, and thermoelectric properties of AgMC₇H₁₀N₂ (M = Cl, Br, and I) compounds. The calculated wide band gap of AgMC₇H₁₀N₂ (M = Cl, Br, and I) metal organic molecules with the density of states approach were 3.32, 3.29, and 3.10 eV, respectively. The NMR parameters are calculated for the Ag, Cl, Br, I, C, N, O, and H elements. It is found that by decreasing bandgap, the isotropic NMR chemical shielding values of Cl, Br, and I elements increase. The strong hybridization of Ag-4d, Cl-3p, Br-4p, and I-5p states are observed at the top of the valence band. The birefringence and anisotropic properties are observed in the optical spectra with high plasmon energies, and the figure of merit, ZT, of 0.98 for AgCl(C₇H₁₀N₂) compound is found at 300 K. Hence, these compounds are attractive flexible metal organic molecules for optoelectronic and transport applications.

Printed Thermoelectrics

The looming impact of climate change and the diminishing supply of fossil fuels both highlight the need for a transition to more sustainable energy sources. While solar and wind can produce much of the energy needed, to meet all our energy demands there is a need for a diverse sustainable energy generation mix. Thermoelectrics can play a vital role in this, by harvesting otherwise wasted heat energy and converting it into useful electrical energy. While efficient thermoelectric materials have been known since the 1950s, thermoelectrics have not been utilized beyond a few niche applications. This can in part be attributed to the high cost of manufacturing and the geometrical restraints of current commercial manufacturing techniques. Printing offers a potential route to manufacture thermoelectric materials at a lower price point and allows for the fabrication of generators that are custom built to meet the waste heat source requirements. This review details the significant progress that has been made in recent years in printing of thermoelectric materials in all thermoelectric material groups and printing methods, and highlights very recent publications that show printing can now offer comparable performance to commercially manufactured thermoelectric materials.

Variable Range Hopping Model Based on Gaussian Disordered Organic Semiconductor for Seebeck Effect in Thermoelectric Device

We investigate the carrier concentration dependent Seebeck coefficient in Gaussian disordered organic semiconductors (GD-OSs) for thermoelectric device applications. Based on the variable-range hopping (VRH) theory, a general model predicting the Seebeck effect is developed to reveal the thermoelectric properties in GD-OSs. The proposed model could interpret the experimental data on carrier concentration- and temperature-dependence of the Seebeck coefficient, including various kinds of conducting polymer film and small molecule based field-effect transistors (FETs). Compared with the conventional Mott’s VRH and mobility edge model, our model has a much better description of the relationship between the Seebeck coefficient and conductivity. The model could deepen our insight into charge transport in organic semiconductors and provide instructions for the optimization of thermoelectric device performance in a disordered system.

Thermal and electrical cross-plane conductivity at the nanoscale in poly(3,4-ethylenedioxythiophene):trifluoromethanesulfonate thin films

Cross-plane electrical and thermal transport in thin films of a conducting polymer (poly(3,4-ethylenedioxythiophene), PEDOT) stabilized with trifluoromethanesulfonate (OTf) is investigated in this study. We explore their electrical properties by conductive atomic force microscopy (C-AFM), which reveals the presence of highly conductive nano-domains. Thermal conductivity in the cross-plane direction is measured by null-point scanning thermal microscopy (NP-SThM). PEDOT:OTf indeed demonstrates a non-negligible electronic contribution to the thermal transport. We further investigate the correlation between electrical and thermal conductivity by applying post-treatment: chemical reduction (de-doping) to lower charge carrier concentration and hence, electrical conductivity and acid treatment (over-doping) to increase the latter. From our measurements, we find a vibrational thermal conductivity of 0.34 ± 0.04 W m^-1 K^-1. From the linear dependence or the electronic contribution of thermal conductivity vs. the electronic conductivity (Wiedemann-Franz law), we infer a Lorenz number 6 times larger than the classical Sommerfeld value as also observed in many organic materials for in-plane thermal transport. By applying the recently proposed molecular Wiedemann-Franz law, we deduced a reorganization energy of 0.53 ± 0.06 eV.

Novel Wearable Pyrothermoelectric Hybrid Generator for Solar Energy Harvesting

Recently, wearable energy harvesting systems have been attracting great attention. As thermal energy is abundant in nature, developing wearable energy harvesters based on thermal energy conversion processes has been of particular interest. By integration of a high-efficient solar absorber, a pyroelectric film, and thermoelectric yarns, herein, we design a novel wearable solar-energy-driven pyrothermoelectric hybrid generator (PTEG). In contrast to those wearable pyroelectric generators and thermoelectric generators reported in previous works, our PTEG can enable effective energy harvesting from both dynamic temperature fluctuations and static temperature gradients. Under an illumination intensity of 1500 W/m² (1.5 sun), the PTEG successfully charges two commercial capacitors to a sum voltage of 3.7 V in only 800 s, and the total energy is able to light up 73 LED light bulbs. The volumetric energy density over the two capacitors is calculated to be 67.8 μJ/cm³. The practical energy harvesting performance of the PTEG is further evaluated in the outdoor environment. The PTEG reported in this work not only demonstrates a rational structural design of high-efficient wearable energy harvesters but also paves a new pathway to integrate multiple energy conversion technologies for solar energy collection.

Coupling Electronic and Phonon Thermal Transport in Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) Nanofibers

The thermal transport of Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) nanofiber is contributed by the electronic component of thermal conduction and the phonon component of thermal conduction. The relationship between the electrical conductivity and thermal conductivity of these conducting polymers is of great interest in thermoelectric energy conversation. In this work, we characterized the axial electrical conductivities and thermal conductivities of the single PEDOT:PSS nanofibers and found that the Lorenz number L is larger than Sommerfeld value L0 at 300 K. In addition, we found that the L increased significantly in the low-temperature region. We consider that this trend is due to the bipolar contribution of conducting polymers with low-level electrical conductivity and the increasing trend of the electronic contribution to thermal conductivity in low-temperature regions.

Understanding PEDOT doped with tosylate

Now in their 5th decade of research and development, conducting polymers represent an interesting class of materials to underpin new wearable or conformable electronic devices. Of particular interest over the years has been poly(3,4-ethylenedioxythiophene), commonly known as PEDOT, owing to its ease of fabrication and relative stability under typical ambient conditions. Understanding PEDOT from a variety of fundamental and applied perspectives is important for how it can be enhanced, modified, functionalised, and/or processed for use in commercial products. This feature article highlights the contribution of the research team at the University of South Australia led by Professor Evans, and their collaborators, putting their work into the broader context of conducting polymer research and application. This review focuses on the vapour synthesis of PEDOT doped with the tosylate anion, the benefits of controlling its morphology/structure during synthesis, and its application as an active material interacting with secondary anions in sensors, energy devices and drug delivery.

Model of the Thermoelectric Properties of Anisotropic Organic Semiconductors

A model of charge hopping transport that accounts for anisotropy of localized states and Coulomb interaction between charges is proposed. For the anisotropic localized states, the degree of orientation relates exponentially to the ratio of conductivities in parallel and perpendicular directions, while the ratio of Seebeck coefficients stays nearly unaffected. However, the ratio of Seebeck coefficients increases if Coulomb interaction is screened stronger in a direction parallel to the predominant orientation of the localized states. This implies two different physical mechanisms responsible for the anisotropy of thermoelectric properties in the hopping regime: electronic state localization for conductivities and screening for Seebeck coefficients. This provides an explanation for the recent experimental findings on tensile drawn and rubbed polymer films.

Electrosynthesis of Biocompatible Free-Standing PEDOT Thin Films at a Polarized Liquid|Liquid Interface

Conducting polymers (CPs) find applications in energy conversion and storage, sensors, and biomedical technologies once processed into thin films. Hydrophobic CPs, like poly(3,4-ethylenedioxythiophene) (PEDOT), typically require surfactant additives, such as poly(styrenesulfonate) (PSS), to aid their aqueous processability as thin films. However, excess PSS diminishes CP electrochemical performance, biocompatibility, and device stability. Here, we report the electrosynthesis of PEDOT thin films at a polarized liquid|liquid interface, a method nonreliant on conductive solid substrates that produces free-standing, additive-free, biocompatible, easily transferrable, and scalable 2D PEDOT thin films of any shape or size in a single step at ambient conditions. Electrochemical control of thin film nucleation and growth at the polarized liquid|liquid interface allows control over the morphology, transitioning from 2D (flat on both sides with a thickness of <50 nm) to “Janus” 3D (with flat and rough sides, each showing distinct physical properties, and a thickness of >850 nm) films. The PEDOT thin films were p-doped (approaching the theoretical limit), showed high π–π conjugation, were processed directly as thin films without insulating PSS and were thus highly conductive without post-processing. This work demonstrates that interfacial electrosynthesis directly produces PEDOT thin films with distinctive molecular architectures inaccessible in bulk solution or at solid electrode–electrolyte interfaces and emergent properties that facilitate technological advances. In this regard, we demonstrate the PEDOT thin film’s superior biocompatibility as scaffolds for cellular growth, opening immediate applications in organic electrochemical transistor (OECT) devices for monitoring cell behavior over extended time periods, bioscaffolds, and medical devices, without needing physiologically unstable and poorly biocompatible PSS.

Soft Organic Thermoelectric Materials: Principles, Current State of the Art and Applications

The enormous demand for waste heat utilization and burgeoning eco-friendly wearable materials has triggered huge interest in the development of thermoelectric materials that can harvest low-cost energy resources by converting waste heat to electricity efficiently. In particular, due to their high flexibility, nontoxicity, cost-effectivity, and promising applicability in various fields, organic thermoelectric materials are drawing more attention compared with their toxic, expensive, heavy, and brittle inorganic counterparts. Organic thermoelectric materials are approaching the figure of merit of the inorganic ones via the construction and optimization of unique transport pathways and device geometries. This review presents the recent development of the interdependence and decoupling principles of the thermoelectric efficiency parameters as well as the new achievements of high performance organic thermoelectric materials. Moreover, this review also discusses the advances in the thermoelectric devices with emphasis on their energy-related applications. It is believed that organic thermoelectric materials are emerging as green energy alternatives rivaling their conventional inorganic counterparts in the efficient and pure electricity harvesting from waste heat and solar thermal energy.

Interface-Induced Seebeck Effect in PtSe2/PtSe2 van der Waals Homostructures

The Seebeck effect refers to the production of an electric voltage when different temperatures are applied on a conductor, and the corresponding voltage-production efficiency is represented by the Seebeck coefficient. We report a Seebeck effect: thermal generation of driving voltage from the heat flowing in a thin PtSe₂/PtSe₂ van der Waals homostructure at the interface. We refer to the effect as the interface-induced Seebeck effect. By exploiting this effect by directly attaching multilayered PtSe₂ over high-resistance PtSe₂ thin films as a hybridized single structure, we obtained the highly challenging in-plane Seebeck coefficient of the PtSe₂ films that exhibit extremely high resistances. This direct attachment further enhanced the in-plane thermal Seebeck coefficients of the PtSe₂/PtSe₂ van der Waals homostructure on sapphire substrates. Consequently, we successfully enhanced the in-plane Seebeck coefficients for the PtSe₂ (10 nm)/PtSe₂ (2 nm) homostructure approximately 42% compared to that of a pure PtSe₂ (10 nm) layer at 300 K. These findings represent a significant achievement in understanding the interface-induced Seebeck effect and provide an effective strategy for promising large-area thermoelectric energy harvesting devices using two-dimensional transition metal dichalcogenide materials, which are ideal thermoelectric platforms with high figures of merit.

Discovering structure-property relationships for the phonon band structures of hydrocarbon-based organic semiconductor crystals: the instructive case of acenes

By studying the low-frequency phonon bands of a series of crystalline acenes, this article lays the foundation for the development of structure-property relationships for phonons in organic semiconductors. Combining state-of-the art quantum-mechanical simulations with simple classical models, we explain how and why phonon frequencies and group velocities do or do not change when varying the molecular and crystal structures of the materials.

Cheap, Large-Scale, and High-Performance Graphite-Based Flexible Thermoelectric Materials and Devices with Supernormal Industry Feasibility

Flexible thermoelectric materials and devices show great potential to solve the energy crisis but still face great challenges of high cost, complex fabrication, and tedious postprocessing. Searching for abnormal thermoelectric materials with rapid and scale-up production can significantly accelerate their applications. Here, we develop superlarge 25 × 20 cm² commercial graphite-produced composite films in batches, achieved by a standard 10 min industrial process. The high cost effectiveness (S²σ/cost) of 7250 μW g m^-1 K^-2 $^-1 is absolutely ahead of that of the existing thermoelectric materials. The optimized composite film shows a high power factor of 94 μW m^-1 K^-2 at 150 °C, representing the optimal value of normal carbon materials so far. Furthermore, we design two types of flexible thermoelectric devices fabricated based on such a novel composite, which achieve an output open-circuit voltage of 3.70 mV using the human wrist as the heat source and 1.33 mV soaking in river water as the cold source. Our study provides distinguished inspiration to enrich flexible and cost-effective thermoelectric materials with industrial production.

Semiconducting Polymers for Neural Applications

Electronically interfacing with the nervous system for the purposes of health diagnostics and therapy, sports performance monitoring, or device control has been a subject of intense academic and industrial research for decades. This trend has only increased in recent years, with numerous high-profile research initiatives and commercial endeavors. An important research theme has emerged as a result, which is the incorporation of semiconducting polymers in various devices that communicate with the nervous system—from wearable brain-monitoring caps to penetrating implantable microelectrodes. This has been driven by the potential of this broad class of materials to improve the electrical and mechanical properties of the tissue–device interface, along with possibilities for increased biocompatibility. In this review we first begin with a tutorial on neural interfacing, by reviewing the basics of nervous system function, device physics, and neuroelectrophysiological techniques and their demands, and finally we give a brief perspective on how material improvements can address current deficiencies in this system. The second part is a detailed review of past work on semiconducting polymers, covering electrical properties, structure, synthesis, and processing.

Enhanced Thermoelectric Properties of Composites Prepared With Poly(3,4-Ethylenedioxythiophene) Poly(Styrenesulfonate) and Vertically Aligned Se Wire

Controlling the electronic transport behavior in thermoelectric composites is one of the most promising approaches to enhance their power factor because this enables decoupling of the correlation between the electrical conductivity and Seebeck coefficient. Herein, we show that the unexpected high power factor of the Se nanowire array embedded in poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) can be achieved by controlling the interfacial band structure engineering. The electrical conductivity and Seebeck coefficient simultaneously increased, confirming that the synthesis of organic/inorganic hybrid thermoelectric materials with improved performance was possible. Our exploration can be helpful for the rational design of high-performance thermoelectric composites through interface engineering.

Backbone-driven host-dopant miscibility modulates molecular doping in NDI conjugated polymers

Molecular doping is the key to enabling organic electronic devices, however, the design strategies to maximize doping efficiency demands further clarity and comprehension. Previous reports focus on the effect of the side chains, but the role of the backbone is still not well understood. In this study, we synthesize a series of NDI-based copolymers with bithiophene, vinylene, and acetylenic moieties (P1G, P2G, and P3G, respectively), all containing branched triethylene glycol side chains. Using computational and experimental methods, we explore the impact of the conjugated backbone using three key parameters for doping in organic semiconductors: energy levels, microstructure, and miscibility. Our experimental results show that P1G undergoes the most efficient n-type doping owed primarily to its higher dipole moment, and better host-dopant miscibility with N-DMBI. In contrast, P2G and P3G possess more planar backbones than P1G, but the lack of long-range order, and poor host-dopant miscibility limit their doping efficiency. Our data suggest that backbone planarity alone is not enough to maximize the electrical conductivity (σ) of n-type doped organic semiconductors, and that backbone polarity also plays an important role in enhancing σ via host-dopant miscibility. Finally, the thermoelectric properties of doped P1G exhibit a power factor of 0.077 μW m-1 K-2, and ultra-low in-plane thermal conductivity of 0.13 W m-1K-1 at 5 mol% of N-DMBI, which is among the lowest thermal conductivity values reported for n-type doped conjugated polymers.

Realizing High Thermoelectric Performance of Bi-Sb-Te-Based Printed Films through Grain Interface Modification by an In Situ-Grown β-Cu2-δSe Phase

It has been a substantial challenge to develop a printed thermoelectric (TE) material with a figure-of-merit ZT > 1. In this work, high ZT p-type Bi_0.5Sb_1.5Te₃-based printable TE materials have been advanced by interface modification of the TE grains with a nonstoichiometric β-Cu_2-δSe-based inorganic binder (IB) through a facile printing-sintering process. As a result, a very high TE power factor of ∼17.5 μW cm^-1 K^-2 for a p-type printed material is attained in the optimized compounds at room temperature (RT). In addition, a high ZT of ∼1.2 at RT and of ∼1.55 at 360 K is realized using thermal conductivity (κ) of a pellet made of the prepared printable material containing 10 wt % of IB. Using the same material for p-type TE legs and silver paste for n-type TE legs, a printed TE generator (print-TEG) of four thermocouples has been fabricated for demonstration. An open-circuit voltage (V_OC) of 14 mV and a maximum power output (P_max) of 1.7 μW are achieved for ΔT = 40 K for the print-TEG.

Thermopower, figure of merit and Fermi integrals

The thermoelectric efficiency accounting for the conversion of thermal energy into electricity is usually given by the figure of merit which involves three transport coefficients, with the thermopower, the electrical and the thermal conductivities. These coefficients can be defined at a semi-classical level as a function of Fermi integrals which only allow analytical approximations in either highly degenerate or strongly non-degenerate regimes. Otherwise, the intermediate regime which is of interest in order to describe high thermoelectric performance requires numerical calculations. It is shown that these Fermi integrals can actually be calculated and that the transport coefficients can be reformulated accordingly. This allows for a new definition of the figure of merit which covers all the regimes of interest without numerical calculations. This formulation of the Fermi integrals also provides a good starting point in order to perform a power expansion leading to a new approximation relevant for the intermediate regime. It turns out that the transport coefficients can then be expanded by revealing their high temperatures asymptotic behaviors. These results shed new light on the thermoelectric properties of the materials and point out that the analysis of their high temperatures behaviors allow to characterize experimentally the energy dependence in the transport integrals.

Toward Flexible Zinc-Air Batteries with Self-Supported Air Electrodes

The compelling demand for higher energy performance, flexibility, and miniaturization is the main driving force of the energy storage and conversion industry's quest for flexible devices based on new integration and fabrication process. Herein, the recent advances on the development of flexible zinc-air batteries based on self-supported air electrodes are summarized, focusing on the multiscale and systematic design principles for the design of flexible air electrodes. With the electrocatalytic activity regulation and structural engineering strategies, the rational design of self-supported air electrodes is discussed in integrated devices to underpin the good flexibility for wearable requirement. The perspectives on promising developments of flexible zinc-air batteries and the accumulated knowledge from other flexible devices are also addressed for promoting the advances on flexible zinc-air batteries.