The structure of I-Crel, a group I intron-encoded homing endonuclease

The two-step cleavage activity of PI-TfuI intein endonuclease demonstrated by matrix-assisted laser desorption ionization time-of-flight mass spectrometry

PI-TfuI, an intein spliced from the DNA polymerase of Thermococcus fumicolans, is a highly specific endonuclease, whose cleavage efficiency and specificity depend on both the substrate topology and the divalent cation used as cofactor. An open circular intermediate was observed during the cleavage of supercoiled DNA by PI-TfuI, suggesting a two-step cleavage of the DNA. We characterized this nicked intermediate and, through the development of a method of analysis of the cleavage reaction based on matrix-assisted laser desorption ionization time-of-flight mass spectrometry, we demonstrated that the cleavage of DNA by PI-TfuI indeed results from two cleavage events. One step results in the cleavage of the bottom strand, which is independent of the DNA conformation or choice of the metal ion cofactor. A second step, which is slower, leads to the cleavage of the top strand and governs the specific requirements of PI-TfuI concerning the essential cofactor and the DNA topology. These two steps were shown to be independent in optimal conditions of cleavage. These data give support to the existence of two distinct and independent active sites in the endonuclease domain of the archaeal intein.

Design, activity, and structure of a highly specific artificial endonuclease

We have generated an artificial highly specific endonuclease by fusing domains of homing endonucleases I-DmoI and I-CreI and creating a new 1400 A(2) protein interface between these domains. Protein engineering was accomplished by combining computational redesign and an in vivo protein-folding screen. The resulting enzyme, E-DreI (Engineered I-DmoI/I-CreI), binds a long chimeric DNA target site with nanomolar affinity, cleaving it precisely at a rate equivalent to its natural parents. The structure of an E-DreI/DNA complex demonstrates the accuracy of the protein interface redesign algorithm and reveals how catalytic function is maintained during the creation of the new endonuclease. These results indicate that it may be possible to generate novel highly specific DNA binding proteins from homing endonucleases.

High resolution crystal structure of domain I of the Saccharomyces cerevisiae homing endonuclease PI-SceI

The homing endonuclease PI-SceI from Saccharo myces cerevisiae consists of two domains. The protein splicing domain I catalyzes the excision of the mature endonuclease (intein) from a precursor protein and the religation of the flanking amino acid sequences (exteins) to a functional protein. Furthermore, domain I is involved in binding and recognition of the specific DNA substrate. Domain II of PI-SceI, the endonuclease domain, which is structurally homologous to other homing endonucleases from the LAGLIDADG family, harbors the endonucleolytic center of PI-SceI, which in vivo initiates the homing process by introducing a double-strand cut in the approximately 35 bp recognition sequence. At 1.35 A resolution, the crystal structure of PI-SceI domain I provides a detailed view of the part of the protein that is responsible for tight and specific DNA binding. A geometry-based docking of the 75 degrees bent recognition sequence to the full-length protein implies a conformational change or hinge movement of a subdomain of domain I, the tongs part, that is predicted to reach into the major groove near base pairs +16 to +18.

Mutations altering the cleavage specificity of a homing endonuclease

The homing endonuclease I-CreI recognizes and cleaves a particular 22 bp DNA sequence. The crystal structure of I-CreI bound to homing site DNA has previously been determined, leading to a number of predictions about specific protein-DNA contacts. We test these predictions by analyzing a set of endonuclease mutants and a complementary set of homing site mutants. We find evidence that all structurally predicted I-CreI/DNA contacts contribute to DNA recognition and show that these contacts differ greatly in terms of their relative importance. We also describe the isolation of a collection of altered specificity I-CreI derivatives. The in vitro DNA-binding and cleavage properties of two such endonucleases demonstrate that our genetic approach is effective in identifying homing endonucleases that recognize and cleave novel target sequences.

Mycobacterium tuberculosis RecA intein possesses a novel ATP-dependent site-specific double-stranded DNA endonuclease activity

Mycobacterium tuberculosis recA harbors an intervening sequence in its open reading frame, presumed to encode an endonuclease (PI-MtuI) required for intein homing in inteinless recA allele. Although the protein-splicing ability of PI-MtuI has been characterized, the identification of its putative endonuclease activity has remained elusive. To investigate whether PI-MtuI possesses endonuclease activity, recA intervening sequence was cloned, overexpressed, and purified to homogeneity. Here we show that PI-MtuI bound both single- and double-stranded DNA with similar affinity but failed to cleave DNA in the absence of cofactors. Significantly, PI-MtuI nicked supercoiled DNA in the presence of alternative cofactors but required both Mn(2+) and ATP to generate linear double-stranded DNA. We observed that PI-MtuI was able to inflict a staggered double-strand break 24 bp upstream of the insertion site in the inteinless recA allele. Similar to a few homing endonucleases, DNA cleavage by PI-MtuI was specific with an exceptionally long cleavage site spanning 22 bp. The kinetic mechanism of PI-MtuI promoted cleavage supports a sequential rather than concerted pathway of strand cleavage with the formation of nicked double-stranded DNA as an intermediate. Together, these results reveal that RecA intein is a novel Mn(2+)-ATP-dependent double-strand specific endonuclease, which is likely to be important for homing process in vivo.

Extensive domain shuffling in transcription regulators of DNA viruses and implications for the origin of fungal APSES transcription factors

BACKGROUND

Viral DNA-binding proteins have served as good models to study the biochemistry of transcription regulation and chromatin dynamics. Computational analysis of viral DNA-binding regulatory proteins and identification of their previously undetected homologs encoded by cellular genomes might lead to a better understanding of their function and evolution in both viral and cellular systems.

RESULTS

The phyletic range and the conserved DNA-binding domains of the viral regulatory proteins of the poxvirus D6R/N1R and baculoviral Bro protein families have not been previously defined. Using computational analysis, we show that the amino-terminal module of the D6R/N1R proteins defines a novel, conserved DNA-binding domain (the KilA-N domain) that is found in a wide range of proteins of large bacterial and eukaryotic DNA viruses. The KilA-N domain is suggested to be homologous to the fungal DNA-binding APSES domain. We provide evidence for the KilA-N and APSES domains sharing a common fold with the nucleic acid-binding modules of the LAGLIDADG nucleases and the amino-terminal domains of the tRNA endonuclease. The amino-terminal module of the Bro proteins is another, distinct DNA-binding domain (the Bro-N domain) that is present in proteins whose domain architectures parallel those of the KilA-N domain-containing proteins. A detailed analysis of the KilA-N and Bro-N domains and the associated domains points to extensive domain shuffling and lineage-specific gene family expansion within DNA virus genomes.

CONCLUSIONS

We define a large class of novel viral DNA-binding proteins and their cellular homologs and identify their domain architectures. On the basis of phyletic pattern analysis we present evidence for a probable viral origin of the fungus-specific cell-cycle regulatory transcription factors containing the APSES DNA-binding domain. We also demonstrate the extensive role of lineage-specific gene expansion and domain shuffling, within a limited set of approximately 24 domains, in the generation of the diversity of virus-specific regulatory proteins.

Many type IIs restriction endonucleases interact with two recognition sites before cleaving DNA

Type IIs restriction endonucleases recognize asymmetric DNA sequences and cleave both DNA strands at fixed positions, typically several base pairs away from the recognition site. These enzymes are generally monomers that transiently associate to form dimers to cleave both strands. Their reactions could involve bridging interactions between two copies of their recognition sequence. To examine this possibility, several type IIs enzymes were tested against substrates with either one or two target sites. Some of the enzymes cleaved the DNA with two target sites at the same rate as that with one site, but most cut their two-site substrate more rapidly than the one-site DNA. In some cases, the two sites were cut sequentially, at rates that were equal to each other but that exceeded the rate on the one-site DNA. In another case, the DNA with two sites was cleaved rapidly at one site, but the residual site was cleaved at a much slower rate. In a further example, the two sites were cleaved concertedly to give directly the final products cut at both sites. Many type IIs enzymes thus interact with two copies of their recognition sequence before cleaving DNA, although via several different mechanisms.

Degeneration of a homing endonuclease and its target sequence in a wild yeast strain

Mobile introns and inteins self-propagate by 'homing', a gene conversion process initiated by site-specific homing endonucleases. The VMA intein, which encodes the PI-SceI endonuclease in Saccharomyces cerevisiae, is present in several different yeast strains. Surprisingly, a wild wine yeast (DH1-1A) contains not only the intein(+) allele, but also an inteinless allele that has not undergone gene conversion. To elucidate how these two alleles co-exist, we characterized the endonuclease encoded by the DH1-1A intein(+) allele and the target site in the intein(-) allele. Sequence analysis reveals seven mutations in the 31 bp recognition sequence, none of which occurs at positions that are individually critical for activity. However, binding and cleavage of the sequence by PI-SceI is reduced 10-fold compared to the S.cerevisiae target. The PI-SceI analog encoded by the DH1-1A intein(+) allele contains 11 mutations at residues in the endonuclease and protein splicing domains. None affects protein splicing, but one, a R417Q substitution, accounts for most of the decrease in DNA cleavage and DNA binding activity of the DH1-1A protein. Loss of activity in the DH1-1A endonuclease and target site provides one explanation for co-existence of the intein(+) and intein(-) alleles.

Homing endonucleases: structural and functional insight into the catalysts of intron/intein mobility

Homing endonucleases confer mobility to their host intervening sequence, either an intron or intein, by catalyzing a highly specific double-strand break in a cognate allele lacking the intervening sequence. These proteins are characterized by their ability to bind long DNA target sites (14-40 bp) and their tolerance of minor sequence changes in these sites. A wealth of biochemical and structural data has been generated for these enzymes over the past few years. Herein we review our current understanding of homing endonucleases, including their diversity and evolution, DNA-binding and catalytic mechanisms, and attempts to engineer them to bind novel DNA substrates.

Chemical probing shows that the intron-encoded endonuclease I-SceI distorts DNA through binding in monomeric form to its homing site

Despite its small size (27.6 kDa), the group I intron-encoded I-SceI endonuclease initiates intron homing by recognizing and specifically cleaving a large intronless DNA sequence. Here, we used gel shift assays and footprinting experiments to analyze the interaction between I-SceI and its target. I-SceI was found to bind to its substrate in monomeric form. Footprinting using DNase I, hydroxyl radical, phenanthroline copper complexes, UV/DH-MePyPs photosensitizer, and base-modifying reagents revealed the asymmetric nature of the interaction and provided a first glimpse into the architecture of the complex. The protein interacts in the minor and major grooves and distorts DNA at three distinct sites: one at the intron insertion site and the other two, respectively, downstream (-8, -9) and upstream (+9, +10) from this site. The protein appears to stabilize the DNA curved around it by bridging the minor groove on one face of the helix. The scissile phosphates would lie on the outside of the bend, facing in the same direction relative to the DNA helical axis, as expected for an endonuclease that generates 3' overhangs. An internally consistent model is proposed in which the protein would take advantage of the concerted flexibility of the DNA sequence to induce a synergistic binding/kinking process, resulting in the correct positioning of the enzyme active site.

A comprehensive characterization of a group IB intron and its encoded maturase reveals that protein-assisted splicing requires an almost intact intron RNA

The group I intron (AnCOB) of the mitochondrial apocytochrome b gene from Aspergillus nidulans encodes a bi-functional maturase protein that is also a DNA endonuclease. Although the AnCOB intron self-splices, the encoded maturase protein greatly facilitates splicing, in part, by stabilizing RNA tertiary structure. To determine their role in self-splicing and in protein-assisted splicing, several peripheral RNA sub-domains in the 313 nucleotide intron were deleted (P2, P9, P9.1) or truncated (P5ab, P6a). The sequence in two helices (P2 and P9) was also inverted. Except for P9, the deleted regions are not highly conserved among group I introns and are often dispensable for catalytic activity. Nevertheless, despite the very tight binding of AnCOB RNA to the maturase and the high activity of the bimolecular complex (the rate of 5' splice-site cleavage was >20 min(-1) with guanosine as the cofactor), the intron was surprisingly sensitive to these modifications. Several mutations inactivated splicing completely and virtually all impaired splicing to varying degrees. Mutants containing comparatively small deletions in various regions of the intron significantly decreased binding affinity (generally >10(4)-fold), indicating that none of the domains that remained constitutes the primary recognition site of the maturase. The data argue that tight binding requires tertiary interactions that can be maintained by only a relatively intact intron RNA, and that the binding mechanism of the maturase differs from those of two other well-characterized group I intron splicing factors, CYT-18 and Cpb2. A model is proposed in which the protein promotes widespread cooperative folding of an RNA lacking extensive initial tertiary structure.

Unusual evolutionary history of the tRNA splicing endonuclease EndA: relationship to the LAGLIDADG and PD-(D/E)XK deoxyribonucleases

The tRNA splicing endoribonuclease EndA from Methanococcus jannaschii is a homotetramer formed via heterologous interaction between the two pairs of homodimers. Each monomer consists of two alpha/beta domains, the N-terminal domain (NTD) and the C-terminal domain (CTD) containing the RNase A-like active site. Comparison of the EndA coordinates with the publicly available protein structure database revealed the similarity of both domains to site-specific deoxyribonucleases: the NTD to the LAGLIDADG family and the CTD to the PD-(D/E)XK family. Superposition of the NTD on the catalytic domain of LAGLIDADG homing endonucleases allowed a suggestion to be made about which amino acid residues of the tRNA splicing nuclease might participate in formation of a presumptive cryptic deoxyribonuclease active site. On the other hand, the CTD and PD-(D/E)XK endonucleases, represented by restriction enzymes and a phage lambda exonuclease, were shown to share extensive similarities of the structural framework, to which entirely different active sites might be attached in two alternative locations. These findings suggest that EndA evolved from a fusion protein with at least two distinct endonuclease activities: the ribonuclease, which made it an essential "antitoxin" for the cells whose RNA genes were interrupted by introns, and the deoxyribonuclease, which provided the means for homing-like mobility. The residues of the noncatalytic CTDs from the positions corresponding to the catalytic side chains in PD-(D/E)XK deoxyribonucleases map to the surface at the opposite side to the tRNA binding site, for which no function has been implicated. Many restriction enzymes from the PD-(D/E)XK superfamily might have the potential to maintain an additional active or binding site at the face opposite the deoxyribonuclease active site, a property that can be utilized in protein engineering.

Rapid evolution of the DNA-binding site in LAGLIDADG homing endonucleases

Sequence analysis of chloroplast and mitochondrial large subunit rRNA genes from over 75 green algae disclosed 28 new group I intron-encoded proteins carrying a single LAGLIDADG motif. These putative homing endonucleases form four subfamilies of homologous enzymes, with the members of each subfamily being encoded by introns sharing the same insertion site. We showed that four divergent endonucleases from the I-CreI subfamily cleave the same DNA substrates. Mapping of the 66 amino acids that are conserved among the members of this subfamily on the 3-dimensional structure of I-CreI bound to its recognition sequence revealed that these residues participate in protein folding, homodimerization, DNA recognition and catalysis. Surprisingly, only seven of the 21 I-CreI amino acids interacting with DNA are conserved, suggesting that I-CreI and its homologs use different subsets of residues to recognize the same DNA sequence. Our sequence comparison of all 45 single-LAGLIDADG proteins identified so far suggests that these proteins share related structures and that there is a weak pressure in each subfamily to maintain identical protein-DNA contacts. The high sequence variability we observed in the DNA-binding site of homologous LAGLIDADG endonucleases provides insight into how these proteins evolve new DNA specificity.

Crystal structure of an archaeal intein-encoded homing endonuclease PI-PfuI

Inteins possess two different enzymatic activities, self-catalyzed protein splicing and site-specific DNA cleavage. These endonucleases, which are classified as part of the homing endonuclease family, initiate the mobility of their genetic elements into homologous alleles. They recognize long asymmetric nucleotide sequences and cleave both DNA strands in a monomer form. We present here the 2.1 A crystal structure of the archaeal PI-PfuI intein from Pyroccocus furiosus. The structure reveals a unique domain, designated here as the Stirrup domain, which is inserted between the Hint domain and an endonuclease domain. The horseshoe-shaped Hint domain contains a catalytic center for protein splicing, which involves both N and C-terminal residues. The endonuclease domain, which is inserted into the Hint domain, consists of two copies of substructure related by an internal pseudo 2-fold axis. In contrast with the I-CreI homing endonuclease, PI-PfuI possibly has two asymmetric catalytic sites at the center of a putative DNA-binding cleft formed by a pair of four-stranded beta-sheets. DNase I footprinting experiments showed that PI-PfuI covers more than 30 bp of the substrate asymmetrically across the cleavage site. A docking model of the DNA-enzyme complex suggests that the endonuclease domain covers the 20 bp DNA duplex encompassing the cleavage site, whereas the Stirrup domain could make an additional contact with another upstream 10 bp region. For the double-strand break, the two strands in the DNA duplex were cleaved by PI-PfuI with different efficiencies. We suggest that the cleavage of each strand is catalyzed by each of the two non-equivalent active sites.

Invasion of a multitude of genetic niches by mobile endonuclease genes

Persistence of a mobile DNA element in a population reflects a balance between the ability of the host to eliminate the element and the ability of the element to survive and to disseminate to other individuals. In each of the three biological kingdoms, several families of a mobile DNA element have been identified which encode a single protein that acts on nucleic acids. Collectively termed homing endonuclease genes (HEGs), these elements employ varied strategies to ensure their survival. Some members of the HEG families have a minimal impact on host fitness because they associate with genes having self-splicing introns or inteins that remove the HEGs at the RNA or protein level. The HEG and the intron/intein gene spread throughout the population by a gene conversion process initiated by the HEG-encoded endonuclease called 'homing' in which the HEG and intron/intein genes are copied to cognate alleles that lack them. The endonuclease activity also contributes to a high frequency of lateral transmission of HEGs between species as has been documented in plants and other systems. Other HEGs have positive selection value because the proteins have evolved activities that benefit their host organisms. The success of HEGs in colonizing diverse genetic niches results from the flexibility of the encoded endonucleases in adopting new specificities.

Purification and characterization of the DNA cleavage and recognition site of I-ScaI mitochondrial group I intron encoded endonuclease produced in Escherichia coli

The second intron in the mitochondrial cytb gene of Saccharomyces capensis, belonging to group I, encodes a 280 amino acid protein containing two LAGLIDADG motifs. Genetic and molecular studies have previously shown that this protein has a dual function in the wild-type strain. It acts as a specific homing endonuclease I- Sca I promoting intron mobility and as a maturase promoting intron splicing. Here we describe the synthesis of a universal code equivalent to the mitochondrial sequence coding for this protein and the in vitro characterization of I- Sca I endonuclease activity, using a truncated mutant form of the protein p28bi2 produced in Escherichia coli. We have also determined the cleavage pattern as well as the recognition site of p28bi2. It was found that p28bi2 generates a double-strand cleavage downstream from the intron insertion site with 4 nt long 3'-overhangs. Mutational analysis of the DNA target site shows that p28bi2 recognizes a 16-19 bp sequence from positions -11 to +8 with respect to the intron insertion site.

Probing the structure of the PI-SceI-DNA complex by affinity cleavage and affinity photocross-linking

The PI-SceI protein is an intein-encoded homing endonuclease that initiates the mobility of its gene by making a double strand break at a single site in the yeast genome. The PI-SceI protein splicing and endonucleolytic active sites are separately located in each of two domains in the PI-SceI structure. To determine the spatial relationship between bases in the PI-SceI recognition sequence and selected PI-SceI amino acids, the PI-SceI-DNA complex was probed by photocross-linking and affinity cleavage methods. Unique solvent-accessible cysteine residues were introduced into the two PI-SceI domains at positions 91, 97, 170, 230, 376, and 378, and the mutant proteins were modified with either 4-azidophenacyl bromide or iron (S)-1-(p-bromoacetamidobenzyl)-ethylenediaminetetraacetate (FeBABE). The phenyl azide-coupled proteins cross-linked to the PI-SceI target sequence, and the FeBABE-modified proteins cleaved the DNA proximal to the derivatized amino acid. The results suggest that an extended beta-hairpin loop in the endonuclease domain that contains residues 376 and 378 contacts the major groove near the PI-SceI cleavage site. Conversely, residues 91, 97, and 170 in the protein splicing domain are in close proximity to a distant region of the substrate. To interpret our results, we used a new PI-SceI structure that is ordered in regions of the protein that bind DNA. The data strongly support a model of the PI-SceI-DNA complex derived from this structure.

PI-PfuI and PI-PfuII, intein-coded homing endonucleases from Pyrococcus furiosus. II. Characterization Of the binding and cleavage abilities by site-directed mutagenesis

PI- Pfu I and PI- Pfu II from Pyrococcus furiosus are homing endonucleases, as shown in the accompanying paper. These two endonucleases are produced by protein splicing from the precursor protein including ribonucleotide reductase (RNR). We show here that both enzymes specifically interact with their substrate DNA and distort the DNA strands by 73 degrees and 67 degrees, respectively. They have two copies of the amino acid sequence motif LAGLIDADG, which is present in the majority of homing endonucleases and provides some of the catalytic residues necessary for DNA cleavage activity. Site-specific mutagenesis studies showed that two acidic residues in the motifs, Asp149 and Glu250 in PI- Pfu I, and Asp156 and Asp249 in PI- Pfu II, were critical for catalysis. The third residues of the active site triads, as predicted from the structure of PI- Sce I, were Asn225 in PI- Pfu I and Lys224 in PI- Pfu II. Substitution of Asn225 in PI- Pfu I by Ala did not affect catalysis. The cleavage activity of PI- Pfu II was 50-fold decreased by the substitution of Ala for Lys224. The binding affinity of the mutant protein for the substrate DNA also decreased 6-fold. The Lys in PI- Pfu II may play a direct or indirect role in catalysis of the endonuclease activity.

PI-PfuI and PI-PfuII, intein-coded homing endonucleases from Pyrococcus furiosus. I. Purification and identification of the homing-type endonuclease activities

We screened for proteins with specific binding activity to Holliday junction DNA from the hyperthermophilic archaeon Pyrococcus furiosus and found a protein that has specific affinity for DNA with a branched structure, like a three-way or four-way junction. The protein was identified as one of the two inteins encoded in the gene for ribonucleotide reductase (RNR) by gene cloning. These two inteins were spliced out from the precursor protein as polypeptides with molecular weights of 53.078 and 43.976 kDa, respectively. The amino acid sequences of these inteins have two copies of the LAGLIDADG motif, which is found in the site-specific DNA endonucleases. The purified proteins actually cleaved double-stranded DNA with the sequence of the intein(-)allele, and, therefore, they were designated PI- Pfu I and PI- Pfu II. They generate a 4 bp 3'-OH overhang with a 5'-phosphate, like other known homing endonucleases originating from inteins. The optimal conditions of the DNA cleavage reaction, including temperature, pH, and concentrations of KCl and MgCl(2), have been determined. The high affinity for junction DNA of PI- Pfu I was confirmed using the purified protein.

An unspliced group I intron in 23S rRNA links Chlamydiales, chloroplasts, and mitochondria

Chlamydia was the only genus in the order Chlamydiales until the recent characterization of Simkania negevensis Z(T) and Parachlamydia acanthamoebae strains. The present study of Chlamydiales 23S ribosomal DNA (rDNA) focuses on a naturally occurring group I intron in the I-CpaI target site of 23S rDNA from S. negevensis. The intron, SnLSU. 1, belonged to the IB4 structural subgroup and was most closely related to large ribosomal subunit introns that express single-motif, LAGLIDADG endonucleases in chloroplasts of algae and in mitochondria of amoebae. RT-PCR and electrophoresis of in vivo rRNA indicated that the intron was not spliced out of the 23S rRNA. The unspliced 658-nt intron is the first group I intron to be found in bacterial rDNA or rRNA, and it may delay the S. negevensis developmental replication cycle by affecting ribosomal function.

Configuration of the catalytic GIY-YIG domain of intron endonuclease I-TevI: coincidence of computational and molecular findings

I-TevI is a member of the GIY-YIG family of homing endonucleases. It is folded into two structural and functional domains, an N-terminal catalytic domain and a C-terminal DNA-binding domain, separated by a flexible linker. In this study we have used genetic analyses, computational sequence analysis andNMR spectroscopy to define the configuration of theN-terminal domain and its relationship to the flexible linker. The catalytic domain is an alpha/beta structure contained within the first 92 amino acids of the 245-amino acid protein followed by an unstructured linker. Remarkably, this structured domain corresponds precisely to the GIY-YIG module defined by sequence comparisons of 57 proteins including more than 30 newly reported members of the family. Although much of the unstructured linker is not essential for activity, residues 93-116 are required, raising the possibility that this region may adopt an alternate conformation upon DNA binding. Two invariant residues of the GIY-YIG module, Arg27 and Glu75, located in alpha-helices, have properties of catalytic residues. Furthermore, the GIY-YIG sequence elements for which the module is named form part of a three-stranded antiparallel beta-sheet that is important for I-TevI structure and function.

Photocross-linking of the homing endonuclease PI-SceI to its recognition sequence

PI-SceI is an intein-encoded protein that belongs to the LAGLIDADG family of homing endonucleases. According to the crystal structure and mutational studies, this endonuclease consists of two domains, one responsible for protein splicing, the other for DNA cleavage, and both presumably for DNA binding. To define the DNA binding site of PI-SceI, photocross-linking was used to identify amino acid residues in contact with DNA. Sixty-three double-stranded oligodeoxynucleotides comprising the minimal recognition sequence and containing single 5-iodopyrimidine substitutions in almost all positions of the recognition sequence were synthesized and irradiated in the presence of PI-SceI with a helium/cadmium laser (325 nm). The best cross-linking yield (approximately 30%) was obtained with an oligodeoxynucleotide with a 5-iododeoxyuridine at position +9 in the bottom strand. The subsequent analysis showed that cross-linking had occurred with amino acid His-333, 6 amino acids after the second LAGLIDADG motif. With the H333A variant of PI-SceI or in the presence of excess unmodified oligodeoxynucleotide, no cross-linking was observed, indicating the specificity of the cross-linking reaction. Chemical modification of His residues in PI-SceI by diethylpyrocarbonate leads to a substantial reduction in the binding and cleavage activity of PI-SceI. This inactivation can be suppressed by substrate binding. This result further supports the finding that at least one His residue is in close contact to the DNA. Based on these and published results, conclusions are drawn regarding the DNA binding site of PI-SceI.

Crystal structure of the thermostable archaeal intron-encoded endonuclease I-DmoI

I-DmoI is a 22 kDa endonuclease encoded by an intron in the 23 S rRNA gene of the hyperthermophilic archaeon Desulfurococcus mobilis. The structure of I-DmoI has been determined to 2.2 A resolution using multi-wavelength anomalous diffraction techniques. I-DmoI, a protein of the LAGLIDADG motif family, represents the first structure of a freestanding endonuclease with two LAGLIDADG motifs, and the first of a thermostable homing endonuclease. I-DmoI consists of two similar alpha/beta domains (alphabetabetaalphabetabetaalpha) related by pseudo 2-fold symmetry. The LAGLIDADG motifs are located at the carboxy-terminal end of the first alpha-helix of each domain. These helices form a two-helix bundle at the interface between the domains and are perpendicular to a saddle-shaped DNA binding surface, formed by two four-stranded antiparallel beta-sheets. Despite substantially different sequences, the overall fold of I-DmoI is similar to that of two other LAGLIDADG proteins for which the structures are known, I-CreI and the endonuclease domain of PI-SceI. The three structures differ most in the loops connecting the beta-strands, relating to the respective DNA target site sizes and geometries. In addition, the absence of conserved residues surrounding the active site, other than those within the LAGLIDADG motif, is of mechanistic importance. Finally, the carboxy-terminal domain of I-DmoI is smaller and has a more irregular fold than the amino-terminal domain, which is more similar to I-CreI, a symmetric homodimeric endonuclease. This is reversed compared to PI-SceI, where the amino-terminal domain is more similar to carboxy-terminal domain of I-DmoI and to I-CreI, with interesting evolutionary implications.

Generation of highly site-specific DNA double-strand breaks in human cells by the homing endonucleases I-PpoI and I-CreI

We have determined the ability of two well-characterized eukaryotic homing endonucleases, I-PpoI from the myxomycete Physarum polycephalum and I-CreI from the green alga Chlamydomonas reinhardtii, to generate site-specific DNA double-strand breaks in human cells. These 18-kDa proteins cleave highly conserved 15- or 24-bp rDNA homing sites in their respective hosts to generate homogeneous 4-base, 3' ends that initiate target intron transposition or "homing." We show that both endonucleases can be expressed in human cells and can generate site-specific DNA double-strand breaks in 28S rDNA and homing site plasmids. These endonuclease-induced breaks can be repaired in vivo, although break repair is mutagenic with the frequent generation of short deletions or insertions. I-PpoI and I-CreI should be useful for analyzing DNA double-strand break repair in human cells and rDNA.

Identification of Lys-403 in the PI-SceI homing endonuclease as part of a symmetric catalytic center

Superposition of the PI-SceI and I-CreI homing endonuclease three-dimensional x-ray structures indicates general similarity between the I-CreI homodimer and the PI-SceI endonuclease domain. Saddle-shaped structures are present in each protein that are proposed to bind DNA. At the putative endonucleolytic active sites, the superposition reveals that two lysine (Lys-301 and Lys-403 in PI-SceI and Lys-98 and Lys-98' in I-CreI) and two aspartic acid residues (Asp-218 and Asp-326 in PI-SceI and Asp-20 and Asp-20' in I-CreI) are related by 2-fold symmetry. The critical role of Lys-301, Asp-218, and Asp-326 in the PI-SceI reaction pathway was reported previously. Here, we demonstrate the significance of the active-site symmetry by showing that alanine substitution at Lys-403 reduces cleavage activity by greater than 50-fold but has little effect on the DNA binding activity of the mutant enzyme. Substitution of Lys-403 with arginine, which maintains the positive charge, has only a modest effect on activity. Interestingly, even though the Lys-301 and Lys-403 residues display pseudosymmetry, PI-SceI mutant proteins with substitutions at these positions have different behaviors. The presence of similar basic and acidic residues in many LAGLIDADG homing endonucleases suggests that these enzymes use a common reaction mechanism to cleave double-stranded DNA.

DNA recognition and cleavage by the LAGLIDADG homing endonuclease I-CreI

The structure of the LAGLIDADG intron-encoded homing endonuclease I-CreI bound to homing site DNA has been determined. The interface is formed by an extended, concave beta sheet from each enzyme monomer that contacts each DNA half-site, resulting in direct side-chain contacts to 18 of the 24 base pairs across the full-length homing site. The structure indicates that I-CreI is optimized to its role in genetic transposition by exhibiting long site-recognition while being able to cleave many closely related target sequences. DNA cleavage is mediated by a compact pair of active sites in the I-CreI homodimer, each of which contains a separate bound divalent cation.

DNA excision by the Sfi I restriction endonuclease

A mechanism for the precise excision of DNA between two target sites was elucidated by analysing the individual steps during the reactions of the SfiI endonuclease on a plasmid with two SfiI sites. Previous studies had indicated that SfiI is a tetrameric protein that binds to two copies of its recognition site before cleaving both sites in both strands. In this study, the concerted cleavage of four phosphodiester bonds was shown to arise from four consecutive reactions that had similar values for their intrinsic rate constants. Each reaction is presumably mediated by one of the four active sites in the tetramer and all four were generally completed within the life-time of the complex between the protein and two recognition sites, though products cleaved in one or two phosphodiester bonds were also detected following premature dissociation of the enzyme-substrate complex at elevated temperatures. At the physiological temperature for this enzyme, all four bonds were cleaved within one minute but the subsequent dissociation of the enzyme-product complex, liberating the excised segment of DNA, took about one hour. The tetrameric structure for SfiI was confirmed by equilibrium centrifugation.

I-PpoI and I-CreI homing site sequence degeneracy determined by random mutagenesis and sequential in vitro enrichment

Plasmid libraries containing partially randomized cleavage sites for the eukaryotic homing endonucleases I-PpoI and I-CreI were constructed, and sites that could be cleaved by I-PpoI or I-CreI were selectively recovered by successive cycles of cleavage and gel separation followed by religation and growth in Escherichia coli. Twenty-one different I-PpoI-sensitive homing sites, including the native homing site, were isolated. These sites were identical at four nucleotide positions within the 15 bp homing site, had a restricted pattern of base substitutions at the remaining 11 positions and displayed a preference for purines flanking the top strand of the homing site sequence. Twenty-one different I-CreI-sensitive homing sites, including the native site, were isolated. Ten nucleotide positions were identical in homing site variants that were I-CreI-sensitive and required the addition of SDS for efficient cleavage product release. Four of these ten positions were identical in homing sites that did not require SDS for product release. There was a preference for pyrimidines flanking the top strand of the homing site sequence. Three of the 24 I-CreI homing site nucleotide positions apparently lacked informational content, i. e. were permissive of cleavage when occupied by any nucleotide. These results suggest that I-PpoI and I-CreI make a large number of DNA-protein contacts across their homing site sequences, and that different subsets of these contacts may be sufficient to maintain a high degree of sequence-specific homing site recognition and cleavage. The sequential enrichment protocol we used should be useful for defining the sequence degeneracy and informational content of other homing endonuclease target sites.

DNA binding and cleavage by the nuclear intron-encoded homing endonuclease I-PpoI

Homing endonucleases are a diverse collection of proteins that are encoded by genes with mobile, self-splicing introns. They have also been identified in self-splicing inteins (protein introns). These enzymes promote the movement of the DNA sequences that encode them from one chromosome location to another; they do this by making a site-specific double-strand break at a target site in an allele that lacks the corresponding mobile intron. The target sites recognized by these small endonucleases are generally long (14-44 base pairs). Four families of homing endonucleases have been identified, including the LAGLIDADG, the His-Cys box, the GIY-YIG and the H-N-H endonucleases. The first identified His-Cys box homing endonuclease was I-PpoI from the slime mould Physarum polycephalum. Its gene resides in one of only a few nuclear introns known to exhibit genetic mobility. Here we report the structure of the I-PpoI homing endonuclease bound to homing-site DNA determined to 1.8 A resolution. I-PpoI displays an elongated fold of dimensions 25 x 35 x 80 A, with mixed alpha/beta topology. Each I-PpoI monomer contains three antiparallel beta-sheets flanked by two long alpha-helices and a long carboxy-terminal tail, and is stabilized by two bound zinc ions 15 A apart. The enzyme possesses a new zinc-bound fold and endonuclease active site. The structure has been determined in both uncleaved substrate and cleaved product complexes.

The protein splicing domain of the homing endonuclease PI-sceI is responsible for specific DNA binding

The homing endonuclease PI- Sce I consists of a protein splicing domain (I) and an endonucleolytic domain (II). To characterize the two domains with respect to their contribution to DNA recognition we cloned, purified and characterized the isolated domains. Both domains have no detectable endonucleolytic activity. Domain I binds specifically to the PI- Sce I recognition sequence, whereas domain II displays only weak non-specific DNA binding. In the specific complex with domain I the DNA is bent to a similar extent as observed with the initial complex formed between PI- Sce I and DNA. Our results indicate that protein splicing domain I is also involved in recognition of the DNA substrate.

Targeting a truncated Ho-endonuclease of yeast to novel DNA sites with foreign zinc fingers

Ho-endonuclease of the yeast, Saccharomyces cerevisiae, initiates a mating type switch by making a site-specific double strand break in the mating type gene, MAT. Ho is a dodecamer endonuclease and shares six of the seven intein motifs with PI- Sce I endonuclease, an intein encoded by the VMAI gene. We show that a 113 residue truncated Ho-endonuclease starting at intein motif C initiates a mating type switch in yeast. Ho is the only dodecamer endonuclease with zinc fingers. To see whether they have a role in determining site specificity we exchanged them for zinc fingers of the yeast transcription factor, Swi5. A chimeric endonuclease comprising the dodecamer motifs of Ho (C-E) and the zinc finger domain of Swi5 cleaves a Swi5 substrate plasmid in vivo. A similar chimera with the zinc fingers of SpI cleaves a GC box rich substrate plasmid. These experiments delineate a catalytic fragment of Ho-endonuclease that can be fused to various DNA binding moieties in the design of chimeric endonucleases with new site specificities.

Amino acid residues in both the protein splicing and endonuclease domains of the PI-SceI intein mediate DNA binding

A structure-based model describing the interaction of the two-domain PI-SceI endonuclease with its 31-base pair DNA substrate suggests that the endonuclease domain (domain II) contacts the cleavage site region of the substrate, while the protein splicing domain (domain I) interacts with a distal region that is sufficient for high affinity binding. To support this model, alanine-scanning mutagenesis was used to assemble a set of 49 PI-SceI mutant proteins that were purified and assayed for their DNA binding and cleavage properties. Fourteen mutant proteins were 4- to >500-fold less active than wild-type PI-SceI in cleavage assays, and one mutant (T225A) was 3-fold more active. Alanine substitution at two positions in domain I reduces overall binding >60-fold by perturbing the interaction of PI-SceI with the minimal binding region. Conversely, mutations in domain II have little effect on binding, reduce binding to the cleavage site region only, or affect binding to both regions. Interestingly, substitutions at Lys301, which is part of the endonucleolytic active site, eliminate binding to the cleavage site region but permit contact with the minimal binding region. This experimental evidence demonstrates that the protein splicing domain as well as the endonuclease domain is involved in binding of a DNA substrate with the requisite length.

Novel site-specific DNA endonucleases

Site-specific hydrolysis of DNA is common to many biological processes. Three new structures, FokI, I-CreI and PI-SceI, were reported in the past year, providing the first view of type IIs endonucleases and homing endonucleases. Together, they reveal an extraordinary set of new mechanisms by which endonucleases target the hydrolysis of specific DNA sequences.

Crystallization and preliminary X-ray studies of I-PpoI: a nuclear, intron-encoded homing endonuclease from Physarum polycephalum

The homing endonuclease I-PpoI is encoded by an optional third intron, Pp LSU 3, found in nuclear, extrachromosomal copies of the Physarum polycephalum 26S rRNA gene. This endonuclease promotes the lateral transfer or "homing" of its encoding intron by recognizing and cleaving a partially symmetric, 15 bp homing site in 26S rDNA alleles that lack the Pp LSU 3 intron. The open reading frame encoding I-PpoI has been subcloned, and the endonuclease has been overproduced in E. coli. Purified recombinant I-PpoI has been co-crystallized with a 21 bp homing site DNA duplex. The crystals belong to space group P3(1)21, with unit cell dimensions a = b = 114 A, c = 89 A. The results of initial X-ray diffraction experiments indicate that the asymmetric unit contains an enzyme homodimer and one duplex DNA molecule, and that the unit cell has a specific volume of 3.4 A3/dalton. These experiments also provide strong evidence that I-PpoI contains several bound zinc ions as part of its structure.

Statistical modeling and analysis of the LAGLIDADG family of site-specific endonucleases and identification of an intein that encodes a site-specific endonuclease of the HNH family

The LAGLIDADG and HNH families of site-specific DNA endonucleases encoded by viruses, bacteriophages as well as archaeal, eucaryotic nuclear and organellar genomes are characterized by the sequence motifs 'LAGLIDADG' and 'HNH', respectively. These endonucleases have been shown to occur in different environments: LAGLIDADG endonucleases are found in inteins, archaeal and group I introns and as free standing open reading frames (ORFs); HNH endonucleases occur in group I and group II introns and as ORFs. Here, statistical models (hidden Markov models, HMMs) that encompass both the conserved motifs and more variable regions of these families have been created and employed to characterize known and potential new family members. A number of new, putative LAGLIDADG and HNH endonucleases have been identified including an intein-encoded HNH sequence. Analysis of an HMM-generated multiple alignment of 130 LAGLIDADG family members and the three-dimensional structure of the I- Cre I endonuclease has enabled definition of the core elements of the repeated domain (approximately 90 residues) that is present in this family of proteins. A conserved negatively charged residue is proposed to be involved in catalysis. Phylogenetic analysis of the two families indicates a lack of exchange of endonucleases between different mobile elements (environments) and between hosts from different phylogenetic kingdoms. However, there does appear to have been considerable exchange of endonuclease domains amongst elements of the same type. Such events are suggested to be important for the formation of elements of new specficity.

Homing endonucleases: keeping the house in order

Homing endonucleases are rare-cutting enzymes encoded by introns and inteins. They have striking structural and functional properties that distinguish them from restriction enzymes. Nomenclature conventions analogous to those for restriction enzymes have been developed for the homing endonucleases. Recent progress in understanding the structure and function of the four families of homing enzymes is reviewed. Of particular interest are the first reported structures of homing endonucleases of the LAGLIDADG family. The exploitation of the homing enzymes in genome analysis and recombination research is also summarized. Finally, the evolution of homing endonucleases is considered, both at the structure-function level and in terms of their persistence in widely divergent biological systems.